Post on 09-Jul-2015
The Evolution of Electronic Engineering
Photo-Masks
A Cost Effective Alternative to E-Beam Technology
We offer a truly uniqueService utilising
Revolutionary fourth generation imaging technology
Photo-Masks
Features Down to 5 Micron
..many thanks for the plots received this morning - they are spot on ! .......thanks again for the excellent service and speedy turnaround - if only all our suppliers were like this !
John Rudin – HP Labs
Hi-Resolution Mask Sizes from 2”x2” to 24”x 36”
64,000DPI
Photo-Masks
Each Mask Computer/Optically Quality Tested
Multiple Data FormatsWidth 5um
Height 5um
Quick Turn Around
Quality Service
CAD/CAM Service
Complete CAD Solutions for the Electronics Industry
We specialise in dedicated
and comprehensive
solutions to aid excellence for IC, Hybrid, Microwave and RF Designers/Fabricators
LinkCAD
CAD Conversion Software
DXF, Gerber, GDSii, EPS, BMP etc etc
Photo-Plotting - PCB
High Resolution Plotting for PCB Fabricators
Big Thanks to the JD team for pulling the stops on the four Tecan plots yesterday, received at 9:15 this morning. Components now produced and we're all happy
Quick Turn Around
Alan Hodges, Tecan UK
Photo-Plotting - PCB
Full Range of in-house PCB Services
PCB Tooling/DRC/MRC
AutoCAD/Postscript Plotting
CAD Translations
Precision Reprographics
Flatbed Accuracy
Ideal for Reprographics
Large Format Films
Films upto 3m x 1m long
PCB Reverse Engineering
Advanced Optical PCB Scanning to Gerber Data
Customised Quotation
No need to re-design your PCB
We accept, Film, PCB’s and Artwork
We produce Gerber and NC Drill/Rout
GerbTool - CAM Solution
Refining the way you Design and Manufacture PCB’s
Advanced Data Import
Fully Automated
User Friendly Navigator
Data Optimisation
GerbTool - CAM Solution
Complete Design Verification
Netlist Compare
DRC/MRC
Design for Fabrication
Design for Fabrication Highlights
GerbTool – CAM SolutionRun multiple rule sets for
different layers using “Passes”
Load and save different rule sets with ease. Rules are stored
within the database
Process entire layers or just areas
using the “Window” feature
Verify all common CAD system design rules as well as those that the
CAD system cannot; like soldermask spacing, drill
tests, and more…
Design/Manufacture Rule Check Features
GerbTool – CAM Solution
Running your analysis has never been
easier!Just load your
previously define rule set or create a
new set from scratch
When you are ready – just hit run!
Once finished you will find all violations
date/time stamped and available for viewing within the Navigator
Each run is stored separately so that you
have a complete running history – Example: Before and after you have made
your fixes
Just click to view a
violation
You can select single and multiple violations for
display – once selected the violation is
highlighted and the zoom level adjust for easy
viewing
Detailed properties for each violation can be accessed through a right-mouse click in
the NavigatorMost all DRC/MRC violations can be
automatically fixed through a right-
mouse click
Fixes can be seen on-screen
immediately
Your fix is also recorded in the
Navigator and is stored in the .GTD database for
review by other users
EMI Stream
Refining the way you Design and Manufacture PCB’s
Analyse PCB Layouts
More than 10 rule checks
Suppress Resonance
Mentor, Cadence, Valor, Zuken
Quality - Inspection
In-house Inspection Systems –CAD/CAM/AOI
Video Capture for less than 5um