Post on 10-Jul-2016
description
Serie GEMAS
JIMÉNEZ
FOR TRANSPORTATION AND DISTRIBUTIONOF ELECTRICITY
www.grupojbelinchon.com
LATTICE FRAME STEEL TOWERS
©Reproduction in whole or in part in any form or medium is prohibited.Year of Publication: 2010 (2ª Edition)
Is has its own engineeringdepartment, with skilledpersonnel and the mostadvanced spatial calculationprogrammes for finiteelements, and CAD/CAMmanufacture programmes, thatcarry out a developmentprocess and an automatic linkwith its production lines.
It has Quality and Environmental certificates, according UNE-EN-ISO 9001:2000 andUNE-EN-ISO 14001:1996, and established a management system for the preventionof laboral risks. For the raw material control, it has its own laboratories and a test plant for towersand structures in their real size. Such plant test has the most modern equipment andadvanced technology, and its own products and the belonging to its customers canbe tested. Jiménez Belinchón S.A., is standardized in the main electric companies in thecountry, and in the telecommunication sector, is standardized and in the nationalcompanies, and in the international radio equipment manufacturers. Its production plants are in Santa Cruz de la Zarza (Toledo), 80 km from Madrid, andit has 80.000 m2, distributed in six work shops, with an aproximated construction of21.000 m2, and the rest are outdoor warehouses, auxiliar buildings and test plant. Its production capacity is 20.000 metric tons per year.
Jiménez Belinchón is a company specialized in engineering, design andmanufacture of structures and metallic towers for the electric and telecommunicationtowers.
JIMÉNEZ
Overhead Ground optionfor all models
www.grupojbelinchon.com
1. Introduction
“In addition to our GEMAS ,JIMÉNEZ BELINCHÓN offers
series
CUSTOM COMPREHENSIVE PROJECTS”
Serie GEMAS
3 INTRODUCTION
1.1. OBJETO This document has been created for being an useful handbook for the user of lattice metallic bearings, catalogued by JIMÉNEZ BELINCHÓN, S.A., for electric lines of 30, 45, 66, 132 y 220 kV. This standardization has been carried out with Bearings calculated by our Engineering department and fulfills the normative for high tension lines, and the specifications of the main electric companies in the market.
1.2. CATALOGUE MODELS
Different models are developed for every tension above mentioned. There are two models for tensions of 30, 45 and 66 kV: ÁMBAR and ÓPALO1, three models for 132 kV: RUBÍ, TOPACIO and AZABACHE, and two models for 220 kV: DIAMANTE and TURQUESA.
The name for this type of towers is GEMAS Series. Next, we mention the towers developed. In the future, these series will be amplified, according our customers’ needs.
MODEL TENSION HEIGHTS AVAILABLE IN m (*)
ÁMBAR Up to 66 kV 9,50 – 11,75 – 14,00 – 16,25 – 18,50 – 20,75 – 23,00 – 25,25 – 27,50
ÓPALO 66 kV. 5,40 – 8,15 – 9,85 – 12,55 – 14,45 – 17,05 – 18,95 – 21,35 – 23,55 – 27,70 – 27,80
RUBÍ 132 kV. 18,00 – 20,00 – 22,00 – 24,00 – 26,00 – 28,00 – 30,00 – 34,00
TOPACIO 132 kV. 18,00 – 20,00 – 22,00 – 24,00 – 26,00 – 28,00 – 30,00 – 34,00
AZABACHE 132 kV. 9,45 – 11,70 – 13,95 – 16,20 – 18,45 – 20,70 – 23,00 – 27,50
DIAMANTE 220 kV. 15,00 – 18,00 – 21,00 – 24,00 – 27,00 – 30,00 – 33,00 – 36,00
TURQUESA 220 kV. 15,00 – 20,00 – 25,00 – 30,00
(*) The indicated height limit the distance between the inferior crossarm and ground level.
_________________________________
1 Possible use in a small lines of 132 kV.
4 INTRODUCTION
1.3. TERMINOLOGY
JIMÉNEZ BELINCHÓN, S.A uses the following contractions for the towers, according the following:
Model:
AM - ÁMBAR OP - ÓPALO RB - RUBÍ TP - TOPACIO AZ - AZABACHE DM - DIAMANTE TQ - TURQUESA
Function Tower (it describes the tower function in every model):
1 - suspension tower 2 - reinforced safety suspension tower. 3 - suspension tower and small angles. 4 - tension tower and small angles. 5 - tension tower and medium angles. 6 - tension tower and heavy angles. 7 - special function tower. 9 - terminal tower.
Disposición de los circuitos. It is defined by the following letters:
E - Hexagonal distribution. T - Triangular distribution. L - Triangular distribution with horizontal base (delta). H - Horizontal distribution. V - Vertical distribution. P - Gantry distribution. B - Umbrella type crossarm distribution. G - Revolving crossarm distribution. C - Insulant crossarm distribution. D - Branching distribution.
5 INTRODUCTION
C2
C
C
FF
A
AC
CC
C2 C2
C C
FF
M
D D
AC
Other Characteristics. They are defined by the following letters:
C - Distance from the bearing axis until the end of the smallest cross. F - Vertical distance between crossarms. A - Vertical distance between earth wire and the top crossarm. M - Vertical distance between earth wires and top crossarm.
Example: RB5 T C3,3/F2,2 A3 26m
A tower with the following characteristics:
RB - RUBÍ Model for 132 kV. 5 - tower function “tension and medium angles”. T - triangular circuit distribution.
C3,3 - distance meter, from the tower axis until the end of the shortest crossarm. F2,2 - 2,2 m vertical distance between crossarm. A3 - earth wire with a distance of 3 m between the earth wire and top crossarm. 26 m - free height, since the earth line until bottom crossarm.
1.4. GENERALITIES
Independently from the different models mentioned in this catalogue, our company can carry out special bearings, even other heights not indicated.
The materials used in the GEMAS Series construction, and considered for the calculation of these towers, are the following: - Angle profiles: Steel, S275 JR or S 355 JO quality according to EN 10025 - Bolts: 5.6 quality, according to DIN 267 and sizes according to DIN 7990. - Washers: According to DIN 7989 - Nuts: Sizes according UNE-EN ISO 4032/4034:2001. Every element used in the tower will be hot dip galvanised, getting a minimum coating of 80 µ (equivalent to 60 grame/m2).
6 INTRODUCTION
The weight, sticking and uniformity of the profiles and sheets coating, has to fulfill UNE-EN ISO 1461:1999 standard. In the same way, bolts and complements have to fulfill UNE-37507 standard. After this process, everything will be tested according our QUALITY CONTROL BOOK TECHNICAL SPECIFICATIONS.
JIMÉNEZ
www.grupojbelinchon.com
Serie GEMAS
2. ModelÁMBAR
Overhead Ground Option
9 ÁMBAR Model
2.1. OBJECT
This document has been prepared for being a handbook for users of Lattice Metallic Towers,for electric lines up to 66 kV.
HL=27,50
CO
MU
N S
EC
TIO
NS
FF
A
AC
T.1
T.2
T2,5
T.3
T.4
T.4,5 T.5
T.6T.5,5
T.3,5
HE
AD
FRE
E H
EIG
HT
HL=9,50
HL=11,75
HL=14,00
HL=16,25
HL=18,50
HL=20,75
HL=23,00
HL=25,25
C
C2
C C2
C
C
AF
F
AC
GEOMETRY TOWER
10 ÁMBAR Model
2.2. ASSEMBLY DIMENSIONS
F
C CF
C
C2
F
CC
C2C2
AF
C
A
AC
AC
AC C C2 F AAM1-T-C 1,9-F 2,0-A 2,3 0,80 1,90 2,30 2,00 2,30AM2-T-C 1,9-F 2,0-A 2,3 0,80 1,90 2,30 2,00 2,30AM3-T-C 1,9-F 2,0-A 2,3 0,80 1,90 2,30 2,00 2,30AM4-T-C 1,9-F 2,0-A 3,3 0,80 1,90 2,30 2,00 3,30AM5-T-C 1,9-F 2,0-A 3,3 0,80 1,90 2,30 2,00 3,30AM6-T-C 1,9-F 2,0-A 3,3 0,80 1,90 2,30 2,00 3,30AM7-T-C 1,9-F 2,0-A 3,3 0,80 1,90 2,30 2,00 3,30
AM2-E-C 1,9-F 2,7-A 2,3 0,80 1,90 2,30 2,70 2,30AM3-E-C 1,9-F 2,7-A 2,3 0,80 1,90 2,30 2,70 2,30AM4-E-C 1,9-F 2,7-A 3,3 0,80 1,90 2,30 2,70 3,30AM5-E-C 1,9-F 2,7-A 3,3 0,80 1,90 2,30 2,70 3,30AM6-E-C 1,9-F 2,7-A 3,3 0,80 1,90 2,30 2,70 3,30AM7-E-C 1,9-F 2,7-A 3,3 0,80 1,90 2,30 2,70 3,30
DENOMINATIONDIMENSIONS IN (m)
2.3. HEIGHTS AND WEIGHTS
The distances HL are calculated combining the sections of the base, between the bottom cross and the land level.
Following, the distances are mentioned, the tower weight and base width B at land level.
HL 9,50 11,75 14,00 16,25 18,50 20,75 23,00 25,25 27,50AM1-T-C 1,9-F 2,0-A 2,3 948 1090 1198 1343 1465 1616 1741 1896 2024AM2-T-C 1,9-F 2,0-A 2,3 982 1126 1241 1401 1522 1699 1834 2030 2180AM3-T-C 1,9-F 2,0-A 2,3 1077 1245 1376 1576 1719 1937 2095 2319 2493AM4-T-C 1,9-F 2,0-A 3,3 1449 1677 1848 2132 2319 2650 2854 3181 3422AM5-T-C 1,9-F 2,0-A 3,3 1584 1904 2113 2434 2657 3004 3240 3590 3847AM6-T-C 1,9-F 2,0-A 3,3 1904 2242 2481 2898 3159 3635 3929 4393 4732AM7-T-C 1,9-F 2,0-A 3,3 2101 2575 2830 3289 3618 4143 4476 4981 5361
DENOMINATION HEIGHTS (m) AND WEIGHTS (kg)
weight
11 ÁMBAR Model
HL 9,50 11,75 14,00 16,25 18,50 20,75 23,00 25,25 27,50AM2-E-C 1,9-F 2,7-A 2,3 1133 1277 1392 1552 1673 1850 1985 2181 2331AM3-E-C 1,9-F 2,7-A 2,3 1232 1400 1531 1731 1874 2092 2250 2474 2648AM4-E-C 1,9-F 2,7-A 3,3 1637 1865 2034 2320 2507 2838 3042 3369 3610AM5-E-C 1,9-F 2,7-A 3,3 1777 2097 2306 2627 2850 3197 3433 3783 4040AM6-E-C 1,9-F 2,7-A 3,3 2119 2457 2696 3113 3374 3850 4144 4608 4947AM7-E-C 1,9-F 2,7-A 3,3 2316 2790 3045 3503 3833 4358 4691 5196 5576
weight
DENOMINATION HEIGHTS (m) AND WEIGHTS (kg)
2.4. OVERALL LOADS
The total useful loadsfon the tower are included in the following table, where:
EU Useful transversal resistant load of the tower, simultaneous with the legal wind overload on the tower.
EL Admissible longitudinal resistant load of the tower. ET Admissible longitudinal resistant load of torsion,
applied on the cross end.Et Admissible longitudinal resistant load of torsion,
applied on the end of the earth wire.EF Horizontal load, caused by tower failure CS Safety factor of the tower for the required loads.
The loads will be considered applied to the height of central crossarm. Coinciding with the previous ones, the loads will be considered due to:
° Wind on the tower (1st. Hypothesis - wind)° Own mass of the tower (every load case)
Failure forceEF
CS=1,00F V L V T V t v
AM1-T-C 1,9-F 2,0-A 2,3 880 1500 1480 2625 1000 700 900 525 2410AM2-T-C 1,9-F 2,0-A 2,3 1370 1500 1710 2625 1000 700 900 525 2790AM3-T-C 1,9-F 2,0-A 2,3 2170 1500 2660 2625 1100 700 1200 525 4200AM4-T-C 1,9-F 2,0-A 3,3 2890 1500 3610 2625 1700 700 1700 525 5700AM5-T-C 1,9-F 2,0-A 3,3 4100 1500 4715 2625 1700 700 1800 525 7300AM6-T-C 1,9-F 2,0-A 3,3 5130 1500 6080 2625 2000 700 2000 525 9350AM7-T-C 1,9-F 2,0-A 3,3 6310 1500 7110 2625 2000 700 2000 525 10730
Mainforce
Secondary force
Conductorbreak
Earth wirebreakDENOMINATION
OVERALL FORCES (daN)
CS=1,50 CS=1,50 CS=1,20 CS=1,20EU EL ET Et
12 ÁMBAR Model
FailureforceEF
CS=1,00F V L V T V t v
AM2-E-C 1,9-F 2,7-A 2,3 1300 2700 1630 4725 1000 700 900 525 2580AM3-E-C 1,9-F 2,7-A 2,3 1980 2700 2490 4725 1200 700 1200 525 3930AM4-E-C 1,9-F 2,7-A 3,3 2790 2700 3600 4725 1700 700 1500 525 5540AM5-E-C 1,9-F 2,7-A 3,3 3950 2700 4490 4725 1700 700 1800 525 6940AM6-E-C 1,9-F 2,7-A 3,3 4900 2700 5950 4725 2000 700 2000 525 9230AM7-E-C 1,9-F 2,7-A 3,3 6120 2700 7000 4725 2000 700 2000 525 10600
CS=1,50 CS=1,50 CS=1,20 CS=1,20
DENOMINATION
OVERALL FORCES (daN)
Main force
Secondaryforce
Conductorbreak
Earth wirebreak
EU EL ET Et
2.5. LOADS PER PHASE
The useful loads per phase are included in the following tables, where
o V-v: Admissible vertical load per conductor and earth wire.o H-h: Admissible horizontal transversal per conductor and earth wire.o L-l: Admissible longitudinal transversal per conductor and earth wire.
DENOMINATION DENOMINATIONAM1-T-C 1,9-F 2,0-A 2,3 AM2-T-C 1,9-F 2,0-A 2,3
LOAD CASES CS v h l V H L LOAD CASES CS v h l V H L
Wind 1,5 300 184 0 400 230 0 Wind 1,5 300 288 0 400 360 0Ice 1,5 525 184 0 700 230 0 Ice 1,5 525 240 0 700 300 0End of line 1,5 525 0 339 700 0 424 End of line 1,5 525 0 390 700 0 488Unbalanced 1,2 525 0 424 700 0 530 Unbalanced 1,2 525 0 488 700 0 610Conductor break 1,2 525 184 800 350 115 1000 Conductor break 1,2 525 240 800 350 150 1000Earth wire break 1,2 263 92 720 700 115 900 Earth wire break 1,2 263 120 720 700 150 900DENOMINATION DENOMINATIONAM3-T-C 1,9-F 2,0-A 2,3 AM4-T-C 1,9-F 2,0-A 3,3
LOAD CASES CS v h l V H L LOAD CASES CS v h l V H L
Wind 1,5 300 456 0 400 570 0 Wind 1,5 300 608 0 400 760 0Ice 1,5 525 400 0 700 500 0 Ice 1,5 525 560 0 700 700 0End of line 1,5 525 0 589 700 0 736 End of line 1,5 525 0 800 700 0 1000Unbalanced 1,2 525 0 736 700 0 920 Unbalanced 1,2 525 0 1000 700 0 1250Conductor break 1,2 525 400 880 350 250 1100 Conductor break 1,2 525 560 1360 350 350 1700Earth wire break 1,2 263 200 960 700 250 1200 Earth wire break 1,2 263 280 1360 700 350 1700
DENOMINATION DENOMINATIONAM5-T-C 1,9-F 2,0-A 3,3 AM6-T-C 1,9-F 2,0-A 3,3
LOAD CASES CS v h l V H L LOAD CASES CS v h l V H L
Wind 1,5 300 864 0 400 1080 0 Wind 1,5 300 1080 0 400 1350 0Ice 1,5 525 800 0 700 1000 0 Ice 1,5 525 1040 0 700 1300 0End of line 1,5 525 0 1024 700 0 1280 End of line 1,5 525 0 1312 700 0 1640Unbalanced 1,2 525 0 1280 700 0 1600 Unbalanced 1,2 525 0 1640 700 0 2050Conductor break 1,2 525 800 1360 350 500 1700 Conductor break 1,2 525 1040 1600 350 650 2000Earth wire break 1,2 263 400 1440 700 500 1800 Earth wire break 1,2 263 520 1600 700 650 2000T
ensi
on to
wer
and
med
ium
ang
les PHASE CONDUCTOR FORCES (daN)
Ten
sion
tow
er a
nd s
tron
g an
gles
PHASE CONDUCTOR FORCES (daN)
CT PHASE CT PHASE
Susp
ensi
on to
wer
extr
a sa
fety
PHASE CONDUCTOR FORCES (daN)
CT PHASE
Susp
ensi
on to
wer
and
sm
all a
ngle
s
PHASE CONDUCTOR FORCES (daN)
Ten
sion
tow
er a
nd s
mal
l ang
les
PHASE CONDUCTOR FORCES (daN)
CT PHASE CT PHASE
Susp
ensi
on to
wer
PHASE CONDUCTOR FORCES (daN)
CT PHASE
13 ÁMBAR Model
DENOMINATIONAM7-T-C 1,9-F 2,0-A 3,3
LOAD CASES CS v h l V H L
Wind 1,5 300 1328 0 400 1660 0Ice 1,5 525 1200 0 700 1500 0End of line 1,5 525 0 1504 700 0 1880Unbalanced 1,2 525 0 1880 700 0 2350Conductor break 1,2 525 1200 1600 350 750 2000Earth wire break 1,2 263 600 1600 700 750 2000
DENOMINATION DENOMINATIONAM2-E-C 1,9-F 2,7-A 2,3 AM3-E-C 1,9-F 2,7-A 2,3
LOAD CASES CS v h l V H L LOAD CASES CS v h l V H L
Wind 1,5 300 152 0 400 190 0 Wind 1,5 300 232 0 400 290 0Ice 1,5 525 120 0 700 150 0 Ice 1,5 525 200 0 700 250 0End of line 1,5 525 0 202 700 0 252 End of line 1,5 525 0 307 700 0 384Unbalanced 1,2 525 0 252 700 0 315 Unbalanced 1,2 525 0 384 700 0 480Conductor break 1,2 525 120 800 350 75 1000 Conductor break 1,2 525 200 960 350 125 1200Earth wire break 1,2 263 60 720 700 75 900 Earth wire break 1,2 263 100 960 700 125 1200DENOMINATION DENOMINATION
AM4-E-C 1,9-F 2,7-A 3,3 AM5-E-C 1,9-F 2,7-A 3,3
LOAD CASES CS v h l V H L LOAD CASES CS v h l V H L
Wind 1,5 300 328 0 400 410 0 Wind 1,5 300 464 0 400 580 0Ice 1,5 525 280 0 700 350 0 Ice 1,5 525 400 0 700 500 0End of line 1,5 525 0 435 700 0 544 End of line 1,5 525 0 544 700 0 680Unbalanced 1,2 525 0 544 700 0 680 Unbalanced 1,2 525 0 680 700 0 850Conductor break 1,2 525 280 1360 350 175 1700 Conductor break 1,2 525 400 1360 350 250 1700Earth wire break 1,2 263 140 1200 700 175 1500 Earth wire break 1,2 263 200 1440 700 250 1800DENOMINATION DENOMINATIONAM6-E-C 1,9-F 2,7-A 3,3 AM7-E-C 1,9-F 2,7-A 3,3
LOAD CASES CS v h l V H L LOAD CASES CS v h l V H L
Wind 1,5 300 576 0 400 720 0 Wind 1,5 300 720 0 400 900 0Ice 1,5 525 560 0 700 700 0 Ice 1,5 525 680 0 700 850 0End of line 1,5 525 0 723 700 0 904 End of line 1,5 525 0 832 700 0 1040Unbalanced 1,2 525 0 904 700 0 1130 Unbalanced 1,2 525 0 1040 700 0 1300Conductor break 1,2 525 560 1600 350 350 2000 Conductor break 1,2 525 680 1600 350 425 2000Earth wire break 1,2 263 280 1600 700 350 2000 Earth wire break 1,2 263 340 1600 700 425 2000T
ensi
on to
wer
and
str
ong
angl
es FORCES PER PHASE (daN)
CT PHASE
CT PHASE
Spec
ial t
ower
FORCES PER PHASE (daN)
CT PHASE
Susp
ensi
on to
wer
and
sm
all a
ngle
s
FORCES PER PHASE (daN)
Ten
sion
tow
er a
nd s
mal
l ang
les FORCES PER PHASE (daN)
CT PHASE
CT PHASE
Ten
sion
tow
er a
nd m
ediu
m a
ngle
s FORCES PER PHASE (daN)
Spec
ial t
ower
PHASE CONDUCTOR FORCES (daN)
Susp
ensi
on to
wer
ex
tra
safe
ty
FORCES PER PHASE (daN)
CT PHASE
CT PHASE
Coinciding with the previous ones, the stresses will be considered due to:
o Wind on the tower (1ª load case - wind)o Own mass of the tower (every load cases)
14 ÁMBAR Model
2.6. FOUNDATIONS
The foundations in these towers are monobloc type, square section. The sizes (meters) of the foundations in these towers in normal soils (K=10 kg/cm².cm) are the mentioned in the following table for every HL height, where:
L : Foundation sideH : Total foundation heightHP : Plint heightVh : Concrete volumeVe : Digging volume
H(m
)H
P
L(m)
HEIGHT (m)
HEIGHT (m)
HL L H HP Vh Ve HL L H HP Vh Ve
9,50 1,30 2,10 0,15 3,803 3,549 9,50 1,30 2,30 0,15 4,141 3,88711,75 1,40 2,10 0,15 4,410 4,116 11,75 1,40 2,30 0,15 4,802 4,50814,00 1,50 2,10 0,15 5,063 4,725 14,00 1,40 2,50 0,15 5,194 4,90016,25 1,50 2,20 0,15 5,288 4,950 16,25 1,50 2,50 0,15 5,963 5,62518,50 1,60 2,20 0,15 6,016 5,632 18,50 1,50 2,60 0,15 6,188 5,85020,75 1,60 2,30 0,15 6,272 5,888 20,75 1,60 2,60 0,15 7,040 6,65623,00 1,70 2,30 0,15 7,081 6,647 23,00 1,60 2,70 0,15 7,296 6,91225,25 1,70 2,40 0,15 7,370 6,936 25,25 1,70 2,70 0,15 8,237 7,80327,50 1,80 2,40 0,15 8,262 7,776 27,50 1,80 2,70 0,15 9,234 8,748HL L H HP Vh Ve HL L H HP Vh Ve
9,50 1,40 2,30 0,15 4,802 4,508 9,50 1,40 2,50 0,15 5,194 4,90011,75 1,40 2,40 0,15 4,998 4,704 11,75 1,40 2,70 0,15 5,586 5,29214,00 1,50 2,50 0,15 5,963 5,625 14,00 1,50 2,70 0,15 6,413 6,07516,25 1,50 2,60 0,15 6,188 5,850 16,25 1,50 2,90 0,15 6,863 6,52518,50 1,60 2,60 0,15 7,040 6,656 18,50 1,60 2,90 0,15 7,808 7,42420,75 1,70 2,60 0,15 7,948 7,514 20,75 1,60 3,10 0,15 8,320 7,93623,00 1,70 2,70 0,15 8,237 7,803 23,00 1,70 3,10 0,15 9,393 8,95925,25 1,80 2,70 0,15 9,234 8,748 25,25 1,80 2,90 0,15 9,882 9,39627,50 1,90 2,70 0,15 10,289 9,747 27,50 1,80 3,10 0,15 10,530 10,044
AM
1-T-
C 1
,9-F
2,0
-A 2
,3A
M3-
T-C
1,9
-F 2
,0-A
2,3
AM
4-T-
C 1
,9-F
2,0
-A 3
,3
AM
2-E-
C 1
,9-F
2,7
-A 2
,3
DIMENSIONS (m)DENOM.
AM
3-E-
C 1
,9-F
2,7
-A 2
,3
AM
4-E-
C 1
,9-F
2,7
-A 3
,3
VOLUME(m³)
AM
2-T-
C 1
,9-F
2,0
-A 2
,3
VOLUME (m³)
DIMENSIONS (m) DENOM.
15 ÁMBAR Model
HEIGHT (m)
HEIGHT (m)
HL L H HP Vh Ve HL L H HP Vh Ve
9,50 1,40 2,70 0,15 5,586 5,292 9,50 1,40 2,80 0,15 5,782 5,48811,75 1,50 2,70 0,15 6,413 6,075 11,75 1,40 2,80 0,15 5,782 5,48814,00 1,50 2,90 0,15 6,863 6,525 14,00 1,50 3,10 0,15 7,313 6,97516,25 1,60 2,90 0,15 7,808 7,424 16,25 1,50 3,10 0,15 7,313 6,97518,50 1,60 3,10 0,15 8,320 7,936 18,50 1,60 3,30 0,15 8,832 8,44820,75 1,70 3,10 0,15 9,393 8,959 20,75 1,60 3,30 0,15 8,832 8,44823,00 1,70 3,20 0,15 9,682 9,248 23,00 1,70 3,50 0,15 10,549 10,11525,25 1,80 3,20 0,15 10,854 10,368 25,25 1,80 3,50 0,15 11,826 11,34027,50 1,80 3,40 0,15 11,502 11,016 27,50 1,80 3,50 0,15 11,826 11,340HL L H HP Vh Ve
9,50 1,40 3,20 0,15 6,566 6,27211,75 1,50 3,20 0,15 7,538 7,20014,00 1,50 3,50 0,15 8,213 7,87516,25 1,60 3,50 0,15 9,344 8,96018,50 1,60 3,60 0,15 9,600 9,21620,75 1,70 3,60 0,15 10,838 10,40423,00 1,80 3,60 0,15 12,150 11,66425,25 1,80 3,80 0,15 12,798 12,31227,50 1,90 3,80 0,15 14,260 13,718
VOLUME (m³)
DIMENSIONS (m)
VOLUME (m³) DENOM.
DIMENSIONS (m)
AM
5-E-
C 1
,9-F
2,7
-A 3
,3
AM
6-E-
C 1
,9-F
2,7
-A 3
,3
DENOM.
AM
7-T-
C 1
,9-F
2,0
-A 3
,3
AM
7-E-
C 1
,9-F
2,7
-A 3
,3
AM
5-T-
C 1
,9-F
2,0
-A 3
,3
AM
6-T-
C 1
,9-F
2,0
-A 3
,3
JIMÉNEZ
www.grupojbelinchon.com
Serie GEMAS
“
heights
YOUR PROJECT”
CONTACT US for greater
, we customize
3. ModelÓPALO
Overhead Ground Option
19 ÓPALO Model
3.1. OBJECT
This document has been prepared for being a handbook for users of Lattice Metallic Towers,for electric lines of 45, 66 kV and short lines up to 132 kV.
T1
T1A T2F T2
T2A T3F T3
T3A T4F T4
T4AT5F T5
T5AT6F T6
T6A
CO
MU
N S
EC
TIO
N
FRE
E H
EIG
HT
AF
FH
EA
D
C
C
C2
AC
AC
AF
F
C C
CC
C2 C2
TOWER GEOMETRY
20 ÓPALO Model
3.2. ASSEMBLY DIMENSIONS
F
C C
F
C
C2
F
CC
C2C2
AF
C
A
AC
AC
AC C C2 F AOP1-T-C 2,0-F 1,3-A 3,0 1,00 2,00 2,30 1,32 3,01OP1-T-C 2,0-F 2,0-A 3,0 1,00 2,00 2,30 2,01 3,02OP1-T-C 2,7-F 2,0-A 4,0 1,00 2,70 3,00 2,01 4,02OP2-T-C 2,0-F 1,3-A 3,0 1,00 2,00 2,30 1,32 3,01OP2-T-C 2,0-F 2,0-A 3,0 1,00 2,00 2,30 2,01 3,02OP2-T-C 2,7-F 2,0-A 4,0 1,00 2,70 3,00 2,01 4,02OP4-T-C 2,0-F 1,3-A 3,0 1,00 2,00 2,30 1,32 3,01OP4-T-C 2,0-F 2,0-A 3,0 1,00 2,00 2,30 2,01 3,02OP4-T-C 2,7-F 2,0-A 4,0 1,00 2,70 3,00 2,01 4,02OP6-T-C 2,0-F 1,3-A 3,0 1,00 2,00 2,30 1,32 3,01OP6-T-C 2,0-F 2,0-A 3,0 1,00 2,00 2,30 2,01 3,02OP6-T-C 2,7-F 2,0-A 4,0 1,00 2,70 3,00 2,01 4,02OP1-E-C 2,0-F 2,7-A 3,0 1,00 2,00 2,30 2,67 3,02OP1-E-C 2,7-F 3,3-A 4,0 1,00 2,70 3,00 3,30 4,01OP2-E-C 2,0-F 2,7-A 3,0 1,00 2,00 2,30 2,67 3,02OP2-E-C 2,7-F 3,3-A 4,0 1,00 2,70 3,00 3,30 4,01OP4-E-C 2,0-F 2,7-A 3,0 1,00 2,00 2,30 2,67 3,02OP4-E-C 2,7-F 3,3-A 4,0 1,00 2,70 3,00 3,30 4,01OP6-E-C 2,0-F 2,7-A 3,0 1,00 2,00 2,30 2,67 3,02OP6-E-C 2,7-F 3,3-A 4,0 1,00 2,70 3,00 3,30 4,01
DENOMINATION DIMENSIONS IN (m)
21 ÓPALO Model
3.3. HEIGHTS AND WEIGHTS
The distances HL are calculated combining the sections of the basis, between the bottom crossarm and the earth wire.
Following, the distances are mentioned, the tower weight and base width B at land level.
DENOMINATIONWIDTH B 1,16 1,22 1,26 1,32 1,36 1,42 1,47 1,52 1,57 1,62 1,67
OP1-T-C 2,0-F 1,3-A 3,0OP1-T-C 2,0-F 2,0-A 3,0 FH 5,40 8,15 10,00 12,55 14,50 17,10 19,15 21,60 23,70 25,85 28,00OP1-T-C 2,7-F 2,0-A 4,0OP2-T-C 2,0-F 1,3-A 3,0OP2-T-C 2,0-F 2,0-A 3,0 FH 5,55 7,95 10,10 12,35 14,55 16,75 19,05 21,15 23,60 25,30 27,85OP2-T-C 2,7-F 2,0-A 4,0OP4-T-C 2,0-F 1,3-A 3,0OP4-T-C 2,0-F 2,0-A 3,0 FH 5,35 7,75 10,05 12,10 14,45 16,50 18,95 20,80 23,40 25,10 27,75OP4-T-C 2,7-F 2,0-A 4,0OP6-T-C 2,0-F 1,3-A 3,0OP6-T-C 2,0-F 2,0-A 3,0 FH 5,35 7,55 10,00 11,90 14,40 16,25 18,90 20,55 23,35 24,80 27,65OP6-T-C 2,7-F 2,0-A 4,0OP1-E-C 2,0-F 2,7-A 3,0OP1-E-C 2,7-F 3,3-A 4,0OP2-E-C 2,0-F 2,7-A 3,0OP2-E-C 2,7-F 3,3-A 4,0OP4-E-C 2,0-F 2,7-A 3,0OP4-E-C 2,7-F 3,3-A 4,0OP6-E-C 2,0-F 2,7-A 3,0OP6-E-C 2,7-F 3,3-A 4,0
DENOMINATIONWIDTH B 1,16 1,22 1,26 1,32 1,36 1,42 1,47 1,52 1,57 1,62 1,67
OP1-T-C 2,0-F 1,3-A 3,0 835 997 1094 1273 1378 1604 1754 1931 2091 2297 2501OP1-T-C 2,0-F 2,0-A 3,0 weight 887 1049 1146 1325 1430 1656 1806 1983 2143 2349 2553OP1-T-C 2,7-F 2,0-A 4,0 984 1146 1243 1422 1527 1753 1903 2080 2240 2446 2650OP2-T-C 2,0-F 1,3-A 3,0 909 1087 1235 1439 1604 1826 2067 2286 2521 2787 3092OP2-T-C 2,0-F 2,0-A 3,0 weight 968 1146 1294 1498 1663 1885 2126 2345 2580 2846 3151OP2-T-C 2,7-F 2,0-A 4,0 1062 1240 1388 1592 1757 1979 2220 2439 2674 2940 3245OP4-T-C 2,0-F 1,3-A 3,0 942 1131 1323 1584 1821 2095 2403 2643 2949 3188 3509OP4-T-C 2,0-F 2,0-A 3,0 weight 1001 1190 1382 1643 1880 2154 2462 2702 3008 3247 3568OP4-T-C 2,7-F 2,0-A 4,0 1125 1314 1506 1767 2004 2278 2586 2826 3132 3371 3692OP6-T-C 2,0-F 1,3-A 3,0 1103 1369 1636 1911 2233 2507 2841 3248 3694 3980 4462OP6-T-C 2,0-F 2,0-A 3,0 weight 1167 1433 1700 1975 2297 2571 2905 3312 3758 4044 4526OP6-T-C 2,7-F 2,0-A 4,0 1289 1555 1822 2097 2419 2693 3027 3434 3880 4166 4648OP1-E-C 2,0-F 2,7-A 3,0 1065 1227 1324 1503 1608 1834 1984 2161 2321 2527 2731OP1-E-C 2,7-F 3,3-A 4,0 1323 1485 1582 1761 1866 2092 2242 2419 2579 2785 2989OP2-E-C 2,0-F 2,7-A 3,0 1132 1310 1458 1662 1827 2049 2290 2509 2744 3010 3315OP2-E-C 2,7-F 3,3-A 4,0 1383 1561 1709 1913 2078 2300 2541 2760 2995 3261 3566OP4-E-C 2,0-F 2,7-A 3,0 1194 1383 1575 1836 2073 2347 2655 2895 3201 3440 3761OP4-E-C 2,7-F 3,3-A 4,0 1441 1630 1822 2083 2320 2594 2902 3142 3448 3687 4008OP6-E-C 2,0-F 2,7-A 3,0 1364 1630 1897 2172 2494 2768 3102 3509 3955 4241 4723OP6-E-C 2,7-F 3,3-A 4,0 1631 1897 2164 2439 2761 3035 3369 3776 4222 4508 4990
23,35 24,80 27,65
20,80 23,40 25,10 27,75
23,60 25,30 27,85
5,35 7,75 10,05 12,10 14,45 16,50 18,95
14,55 16,75 19,05 21,155,55 7,95 10,10 12,35
weight
5,40 8,15 10,00
5,35 7,55 10,00
FH
FH
FH
FH
weight
weight
weight
HEIGHT (m) AND WEIGHT (m)
11,90 14,40 16,25 18,90 20,55
HEIGHT (m) AND WIDTH (m)
12,55 14,50 17,10 19,15 21,60 23,70 25,85 28,00
22 ÓPALO Model
Failure forceEF
CS=1,00F V L V T V t v
OP1-T-C 2,0-F 1,3-A 3,0 1665 1440 2200 3585 2000 690 2000 440 3168OP1-T-C 2,0-F 2,0-A 3,0 1625 1440 2150 3585 2000 690 2000 440 3078OP1-T-C 2,7-F 2,0-A 4,0 1600 1440 2115 3585 2000 690 2000 440 3018OP2-T-C 2,0-F 1,3-A 3,0 3100 1440 3410 3585 2000 690 2000 440 5245OP2-T-C 2,0-F 2,0-A 3,0 3030 1440 3330 3585 2000 690 2000 440 5097OP2-T-C 2,7-F 2,0-A 4,0 2980 1440 3280 3585 2000 690 2000 440 4885OP4-T-C 2,0-F 1,3-A 3,0 4555 1440 4780 3585 2000 690 2000 440 7297OP4-T-C 2,0-F 2,0-A 3,0 4450 1440 4670 3585 2000 690 2000 440 7026OP4-T-C 2,7-F 2,0-A 4,0 4380 1440 4595 3585 2000 690 2000 440 6719OP6-T-C 2,0-F 1,3-A 3,0 6190 1440 6930 3585 2375 690 2000 440 10092OP6-T-C 2,0-F 2,0-A 3,0 6050 1440 6770 3585 2375 690 2000 440 9549OP6-T-C 2,7-F 2,0-A 4,0 5950 1440 6660 3585 2375 690 2000 440 9490OP1-E-C 2,0-F 2,7-A 3,0 1550 2700 2050 6540 2000 690 2000 440 3032OP1-E-C 2,7-F 3,3-A 4,0 1425 2700 1880 6540 2000 690 2000 440 2923OP2-E-C 2,0-F 2,7-A 3,0 2890 2700 3175 6540 2000 690 2000 440 5022OP2-E-C 2,7-F 3,3-A 4,0 2665 2700 2920 6540 2000 690 2000 440 4572OP4-E-C 2,0-F 2,7-A 3,0 4245 2700 4455 6540 2000 690 2000 440 6592OP4-E-C 2,7-F 3,3-A 4,0 3900 2700 4090 6540 2000 690 2000 440 6220OP6-E-C 2,0-F 2,7-A 3,0 5765 2700 6455 6540 2375 690 2000 440 9157OP6-E-C 2,7-F 3,3-A 4,0 5300 2700 5930 6540 2375 690 2000 440 8926
Et
Main force Secondary force
Conductor break
Earth wire breakDENOMINATION
OVERALL FORCES (daN)
CS=1,50 CS=1,50 CS=1,20 CS=1,20EU EL ET
3.4. OVERALL LOADS
The total useful stresses on the tower are included in the following table, where:
EU Useful transversal resistant load of the tower, simultaneous with the legal wind overload on the tower.
EL Admissible longitudinal resistant load of the tower. ET Admissible longitudinal resistant load of torsion,
applied on the cross end.Et Admissible longitudinal resistant load of torsion,
applied on the end of the earth wire.EF Horizontal stress, caused by tower failure CS Safety factor of the tower for the required loads.
The loads will be considered applied to the height of central crossarm. Coinciding with the previous ones, the stresses will be considered due to:
° Wind on the tower (1ª Hypothesis - wind)° Own mass of the tower (every load cases)
23 ÓPALO Model
3.5. FORCES PER PHASE The useful loads per phase are included in the following tables, where:
° V-v: Admissible vertical load per conductor and earth wire. ° H-h: Admissible horizontal transversal per conductor and earth wire. ° L-l: Admissible longitudinal transversal per conductor and earth wire.
DENOMINATION DENOMINATIONOP1-T-C 2,0-F 1,3-A 3,0 OP1-T-C 2,0-F 2,0-A 3,0LOAD CASES CS v h l V H L LOAD CASES CS v h l V H LWind 1,5 180 306 0 420 438 0 Wind 1,5 180 298 0 420 426 0Ice 1,5 630 405 0 985 578 0 Ice 1,5 630 394 0 985 563 0End of line 1,5 504 0 324 788 0 463 End of line 1,5 504 0 315 788 0 450Unbalanced 1,2 630 0 405 985 0 578 Unbalanced 1,2 630 0 394 985 0 563Conductor break 1,2 630 0 0 690 0 2000 Conductor break 1,2 630 0 0 690 0 2000Earth wire break 1,2 440 0 2000 985 0 0 Earth wire break 1,2 440 0 2000 985 0 0DENOMINATION DENOMINATIONOP1-T-C 2,7-F 2,0-A 4,0 OP2-T-C 2,0-F 1,3-A 3,0LOAD CASES CS v h l V H L LOAD CASES CS v h l V H LWind 1,5 180 292 0 420 416 0 Wind 1,5 180 570 0 420 815 0Ice 1,5 630 385 0 985 551 0 Ice 1,5 630 627 0 985 896 0End of line 1,5 504 0 308 788 0 440 End of line 1,5 504 0 502 788 0 717Unbalanced 1,2 630 0 385 985 0 551 Unbalanced 1,2 630 0 627 985 0 896Conductor break 1,2 630 0 0 690 0 2000 Conductor break 1,2 630 0 0 690 0 2000Earth wire break 1,2 440 0 2000 985 0 0 Earth wire break 1,2 440 0 2000 985 0 0DENOMINATION DENOMINATIONOP2-T-C 2,0-F 2,0-A 3,0 OP2-T-C 2,7-F 2,0-A 4,0LOAD CASES CS v h l V H L LOAD CASES CS v h l V H LWind 1,5 180 556 0 420 794 0 Wind 1,5 180 543 0 420 776 0Ice 1,5 630 611 0 985 872 0 Ice 1,5 630 598 0 985 854 0End of line 1,5 504 0 488 788 0 698 End of line 1,5 504 0 478 788 0 683Unbalanced 1,2 630 0 611 985 0 872 Unbalanced 1,2 630 0 598 985 0 854Conductor break 1,2 630 0 0 690 0 2000 Conductor break 1,2 630 0 0 690 0 2000Earth wire break 1,2 440 0 2000 985 0 0 Earth wire break 1,2 440 0 2000 985 0 0DENOMINATION DENOMINATION
OP4-T-C 2,0-F 1,3-A 3,0 OP4-T-C 2,0-F 2,0-A 3,0LOAD CASES CS v h l V H L LOAD CASES CS v h l V H LWind 1,5 180 838 0 420 1197 0 Wind 1,5 180 816 0 420 1166 0Ice 1,5 630 880 0 985 1257 0 Ice 1,5 630 856 0 985 1223 0End of line 1,5 504 0 704 788 0 1005 End of line 1,5 504 0 685 788 0 979Unbalanced 1,2 630 0 880 985 0 1257 Unbalanced 1,2 630 0 856 985 0 1223Conductor break 1,2 630 0 0 690 0 2000 Conductor break 1,2 630 0 0 690 0 2000Earth wire break 1,2 440 0 2000 985 0 0 Earth wire break 1,2 440 0 2000 985 0 0DENOMINATION DENOMINATIONOP4-T-C 2,7-F 2,0-A 4,0 OP6-T-C 2,0-F 1,3-A 3,0LOAD CASES CS v h l V H L LOAD CASES CS v h l V H LWind 1,5 180 798 0 420 1140 0 Wind 1,5 180 1139 0 420 1627 0Ice 1,5 630 837 0 985 1196 0 Ice 1,5 630 1275 0 985 1822 0End of line 1,5 504 0 670 788 0 957 End of line 1,5 504 0 1020 788 0 1457Unbalanced 1,2 630 0 837 985 0 1196 Unbalanced 1,2 630 0 1275 985 0 1822Conductor break 1,2 630 0 0 690 0 2000 Conductor break 1,2 630 0 0 690 0 2375Earth wire break 1,2 440 0 2000 985 0 0 Earth wire break 1,2 440 0 2000 985 0 0
Susp
ensi
on to
wer
FORCES PER PHASE (daN)CT PHASE
Susp
ensi
on to
wer
Susp
ensi
on to
wer
FORCES PER PHASE (daN)CT PHASE
FORCES PER PHASE (daN)CT PHASE
Susp
ensi
on to
wer
ext
ra sa
fety FORCES PER PHASE (daN)
CT PHASE
CT PHASEFORCES PER PHASE (daN)
Susp
ensi
on to
wer
ext
ra sa
fety
Susp
ensi
on to
wer
ext
ra sa
fetyFORCES PER PHASE (daN)
CT PHASE
FORCES PER PHASE (daN)CT PHASE
CT PHASE
Susp
ensi
on to
wer
and
smal
l an
gles
Susp
ensi
on to
wer
and
smal
l an
gles
Susp
ensi
on to
wer
and
smal
l an
gles
FORCES PER PHASE (daN)CT PHASE
FORCES PER PHASE (daN) FORCES PER PHASE (daN)
Susp
ensi
on to
wer
and
st
rong
angl
es
CT PHASE
24 ÓPALO Model
DENOMINATION DENOMINATIONOP6-T-C 2,0-F 2,0-A 3,0 OP6-T-C 2,7-F 2,0-A 4,0LOAD CASES CS v h l V H L LOAD CASES CS v h l V H LWind 1,5 180 1109 0 420 1585 0 Wind 1,5 180 1084 0 420 1549 0Ice 1,5 630 1241 0 985 1773 0 Ice 1,5 630 1214 0 985 1734 0End of line 1,5 504 0 993 788 0 1419 End of line 1,5 504 0 971 788 0 1387Unbalanced 1,2 630 0 1241 985 0 1773 Unbalanced 1,2 630 0 1214 985 0 1734Conductor break 1,2 630 0 0 690 0 2375 Conductor break 1,2 630 0 0 690 0 2375Earth wire break 1,2 440 0 2000 985 0 0 Earth wire break 1,2 440 0 2000 985 0 0DENOMINATION DENOMINATIONOP1-E-C 2,0-F 2,7-A 3,0 OP2-E-C 2,0-F 2,7-A 3,0LOAD CASES CS v h l V H L LOAD CASES CS v h l V H LWind 1,5 180 159 0 420 227 0 Wind 1,5 180 296 0 420 423 0Ice 1,5 630 210 0 985 300 0 Ice 1,5 630 325 0 985 465 0End of line 1,5 504 0 168 788 0 240 End of line 1,5 504 0 260 788 0 372Unbalanced 1,2 630 0 210 985 0 300 Unbalanced 1,2 630 0 325 985 0 465Conductor break 1,2 630 0 0 690 0 2000 Conductor break 1,2 630 0 0 690 0 2000Earth wire break 1,2 440 0 2000 985 0 0 Earth wire break 1,2 440 0 2000 985 0 0DENOMINATION DENOMINATIONOP1-E-C 2,7-F 3,3-A 4,0 OP2-E-C 2,7-F 3,3-A 4,0LOAD CASES CS v h l V H L LOAD CASES CS v h l V H LWind 1,5 180 145 0 420 208 0 Wind 1,5 180 272 0 420 388 0Ice 1,5 630 192 0 985 274 0 Ice 1,5 630 298 0 985 425 0End of line 1,5 504 0 153 788 0 219 End of line 1,5 504 0 238 788 0 340Unbalanced 1,2 630 0 192 985 0 274 Unbalanced 1,2 630 0 298 985 0 425Conductor break 1,2 630 0 0 690 0 2000 Conductor break 1,2 630 0 0 690 0 2000Earth wire break 1,2 440 0 2000 985 0 0 Earth wire break 1,2 440 0 2000 985 0 0DENOMINATION DENOMINATIONOP4-E-C 2,0-F 2,7-A 3,0 OP6-E-C 2,0-F 2,7-A 3,0LOAD CASES CS v h l V H L LOAD CASES CS v h l V H LWind 1,5 180 435 0 420 621 0 Wind 1,5 180 591 0 420 844 0Ice 1,5 630 457 0 985 652 0 Ice 1,5 630 662 0 985 945 0End of line 1,5 504 0 365 788 0 522 End of line 1,5 504 0 529 788 0 756Unbalanced 1,2 630 0 457 985 0 652 Unbalanced 1,2 630 0 662 985 0 945Conductor break 1,2 630 0 0 690 0 2000 Conductor break 1,2 630 0 0 690 0 2375Earth wire break 1,2 440 0 2000 985 0 0 Earth wire break 1,2 440 0 2000 985 0 0DENOMINATION DENOMINATIONOP4-E-C 2,7-F 3,3-A 4,0 OP6-E-C 2,7-F 3,3-A 4,0LOAD CASES CS v h l V H L LOAD CASES CS v h l V H LWind 1,5 180 398 0 420 568 0 Wind 1,5 180 540 0 420 772 0Ice 1,5 630 417 0 985 596 0 Ice 1,5 630 605 0 985 864 0End of line 1,5 504 0 334 788 0 477 End of line 1,5 504 0 484 788 0 691Unbalanced 1,2 630 0 417 985 0 596 Unbalanced 1,2 630 0 605 985 0 864Conductor break 1,2 630 0 0 690 0 2000 Conductor break 1,2 630 0 0 690 0 2375Earth wire break 1,2 440 0 2000 985 0 0 Earth wire break 1,2 440 0 2000 985 0 0
CT PHASE
FORCES PER PHASE (daN)CT PHASE
FORCES PER PHASE (daN)CT PHASE
FORCES PER PHASE (daN)CT PHASE
FORCES PER PHASE (daN)CT PHASE
FORCES PER PHASE (daN)
CT PHASE
FORCES PER PHASE (daN)CT PHASE
FORCES PER PHASE (daN)CT PHASE
FORCES PER PHASE (daN)Te
nsio
n to
wer
and
stro
ng
angl
esTe
nsio
n to
wer
and
stro
ng
angl
esSu
spen
sion
tow
er e
xtra
safe
tySu
spen
sion
tow
er e
xtra
safe
ty
Susp
ensi
on to
wer
Susp
ensi
on to
wer
Susp
ensi
on to
wer
and
smal
l an
gles
Tens
ion
tow
er a
nd sm
all
angl
es
FORCES PER PHASE (daN)CT PHASE
FORCES PER PHASE (daN)CT PHASE
Tens
ion
tow
er a
nd st
rong
an
gles
Tens
ion
tow
er a
nd st
rong
an
gles
Coinciding with the previous ones, the stresses will be considered due to
° Wind on the tower (1ª load case - wind) ° Own mass of the tower (every load cases)
25 ÓPALO Model
3.6. FOUNDATIONS The foundations in these towers are monobloc type, square section.
The loads for every anchoring and for every HL height are mentioned in kilos in the following table.
DENOMINATION
Uplift 12629 14917 16777 18422 20784 22201 24301 25409 27593 28868 30446Compression 15308 18432 20368 22161 24647 26237 28463 29742 31696 32711 33904Uplift 14110 16178 17358 18920 21171 22518 24520 25877 28302 29562 31123Compression 16837 19160 21015 22724 25101 26620 28748 29970 31838 32809 34326Uplift 15532 17538 18595 19741 21293 22588 24519 25952 28345 29588 31130Compression 18354 20290 21582 23013 25308 26777 28832 30014 31817 32757 34419Uplift 18923 21872 26585 29178 32124 36112 38825 42460 44966 48131 50644Compression 22293 25413 30220 32674 35411 38980 41526 45345 48023 51357 54084Uplift 20177 23008 27889 30412 33282 37173 39822 43374 45822 48920 51382Compression 23609 26579 31177 33517 36132 39769 42584 46320 48941 52208 54882Uplift 20616 23309 27997 30466 33278 37092 39691 43178 45582 48628 51048Compression 24132 26998 31457 33726 36262 39774 42539 46209 48787 52001 54635Uplift 24172 31096 35847 41798 45968 51405 55162 58266 63391 66067 70981Compression 27601 34473 39055 44662 48566 54100 58056 61355 66736 69621 74787Uplift 26237 33004 37604 43368 47408 52682 56328 59340 64320 66922 71706Compression 29510 36072 40449 45801 49963 55439 59284 62491 67728 70537 75574Uplift 26554 33170 37667 43302 47254 52417 55987 58938 63820 66370 71067Compression 30019 36403 40653 45843 49895 55260 59029 62174 67313 70072 75020Uplift 35283 44961 51505 59437 64845 69255 76328 79972 86064 89051 94572Compression 38778 48654 55428 63580 69271 73924 81283 85156 91541 94741 100567Uplift 37982 47213 53454 61019 66172 70375 77118 80589 86391 89237 95204Compression 41534 50965 57435 65220 70656 75103 82131 85832 91927 94985 100552Uplift 38386 47368 53427 60769 65765 69843 76384 79749 85376 88136 94171Compression 42049 51230 57520 65081 70361 74681 81508 85103 91023 93996 99404Uplift 13450 15374 16584 17653 19208 20853 23364 24818 27234 28484 30037Compression 17968 20028 21299 22485 24554 26039 28144 29340 31211 32624 34326Uplift 15821 17599 18735 19735 21193 22026 23310 24610 26939 28144 29645Compression 20487 22401 23598 24715 26273 27245 28629 29436 31100 32469 34118Uplift 18962 21927 26706 29173 31985 35799 38399 41886 44291 47337 49757Compression 23185 26054 30545 32823 35482 39482 42247 45917 48496 51710 54344Uplift 19372 22110 26573 28874 31504 35080 37524 40808 43077 45959 48252Compression 23100 25640 29923 32390 35185 38948 41556 45024 47467 50516 53024Uplift 25222 31820 36296 41904 45837 50975 54530 57467 62329 64868 69546Compression 29057 35468 39723 45345 49478 54818 58571 61703 66822 69570 74500Uplift 25642 31722 35848 41020 44652 49409 52705 55430 59957 62322 66698Compression 29092 35029 39299 44645 48478 53436 56932 59851 64634 67208 71836Uplift 35095 44070 50107 57416 62390 66449 73114 76813 83236 86424 92542Compression 41033 50207 56474 64003 69261 73561 80359 83939 89836 92796 98181Uplift 34844 42897 48309 55108 59860 63783 70324 73719 79680 82632 88297Compression 41019 49271 54900 61675 66405 70275 76387 79602 84909 88068 94024
OP4-T-C 2,0-F 1,3-A 3,0
OP6-T-C 2,0-F 2,0-A 3,0
OP6-E-C 2,0-F 2,7-A 3,0
OP6-E-C 2,7-F 3,3-A 4,0
LOADS OVER THE FOUNDATIONS (kg)
OP1-E-C 2,0-F 2,7-A 3,0
OP1-E-C 2,7-F 3,3-A 4,0
OP2-E-C 2,0-F 2,7-A 3,0
OP2-E-C 2,7-F 3,3-A 4,0
OP4-E-C 2,0-F 2,7-A 3,0
OP4-E-C 2,7-F 3,3-A 4,0
OP6-T-C 2,7-F 2,0-A 4,0
OP1-T-C 2,0-F 1,3-A 3,0
OP1-T-C 2,0-F 2,0-A 3,0
OP1-T-C 2,7-F 2,0-A 4,0
OP2-T-C 2,0-F 1,3-A 3,0
OP2-T-C 2,0-F 2,0-A 3,0
OP2-T-C 2,7-F 2,0-A 4,0
OP4-T-C 2,0-F 2,0-A 3,0
OP4-T-C 2,7-F 2,0-A 4,0
OP6-T-C 2,0-F 1,3-A 3,0
26 ÓPALO Model
The sizes (meters) of the foundations in these towers in normal soils (K=10 kg/cm².cm) are the mentioned in the following table for every HL height, where: L: Foundation side H: Total foundation height HP: Plint height Vh: Concrete volume Ve: Digging volume
H(m
)H
P
L(m)
HEIGHT (m)
HEIGHT (m)
HL L H HP Vh Ve HL L H HP Vh Ve5,40 1,74 1,80 0,15 5,890 5,436 5,40 1,84 1,80 0,15 6,587 6,0808,15 1,80 1,85 0,15 6,479 5,993 8,15 1,90 1,85 0,15 7,218 6,677
10,00 1,94 1,85 0,15 7,527 6,962 10,00 2,04 1,85 0,15 8,323 7,69912,55 1,88 1,95 0,15 7,432 6,901 12,55 1,98 1,95 0,15 8,243 7,65414,50 2,04 1,95 0,15 8,751 8,126 14,50 2,14 1,95 0,15 9,629 8,94117,10 2,08 2,00 0,15 9,326 8,675 17,10 2,08 2,00 0,15 9,326 8,67519,15 2,15 2,00 0,15 9,890 9,200 19,15 2,25 2,00 0,15 10,833 10,07821,60 2,18 2,05 0,15 10,489 9,774 21,60 2,28 2,05 0,15 11,472 10,69023,70 2,15 2,10 0,15 10,369 9,678 23,70 2,25 2,10 0,15 11,358 10,60125,85 2,28 2,10 0,15 11,708 10,927 25,85 2,28 2,10 0,15 11,708 10,92728,00 2,22 2,15 0,15 11,364 10,623 28,00 2,32 2,15 0,15 12,410 11,600HL L H HP Vh Ve HL L H HP Vh Ve5,40 1,94 1,80 0,15 7,323 6,760 5,55 1,54 1,95 0,15 4,993 4,6368,15 2,00 1,85 0,15 7,998 7,398 7,95 1,58 2,05 0,15 5,499 5,124
10,00 2,14 1,85 0,15 9,159 8,472 10,10 1,65 2,10 0,15 6,091 5,68512,55 1,98 1,95 0,15 8,243 7,654 12,35 1,68 2,20 0,15 6,647 6,22314,50 2,14 1,95 0,15 9,629 8,941 14,55 1,72 2,30 0,15 7,282 6,83617,10 2,18 2,00 0,15 10,243 9,528 16,75 1,78 2,40 0,15 8,110 7,63319,15 2,35 2,00 0,15 11,820 10,995 19,05 1,83 2,50 0,15 8,830 8,33021,60 2,28 2,05 0,15 11,472 10,690 21,15 1,88 2,55 0,15 9,586 9,05323,70 2,35 2,10 0,15 12,391 11,565 23,60 1,93 2,60 0,15 10,209 9,65225,85 2,38 2,10 0,15 12,757 11,906 25,30 1,98 2,65 0,15 10,989 10,40128,00 2,32 2,15 0,15 12,410 11,600 27,85 2,03 2,65 0,15 11,483 10,868
DENOM. DIMENSIONS (m) VOLUME (m³)
OP1
-T-C
2,0
-F 2
,0-A
3,0
OP1
-T-C
2,7
-F 2
,0-A
4,0
VOLUME (m³)
DIMENSIONS (m)DENOM.
OP1
-T-C
2,0
-F 1
,3-A
3,0
OP2
-T-C
2,0
-F 1
,3-A
3,0
27 ÓPALO Model
HEIGHT (m)
HEIGHT (m)
HL L H HP Vh Ve HL L H HP Vh Ve5,40 1,94 1,80 0,15 7,323 6,760 5,40 2,04 1,80 0,15 8,098 7,4768,15 2,00 1,85 0,15 7,998 7,398 8,15 2,20 1,85 0,15 9,678 8,95210,00 2,14 1,85 0,15 9,159 8,472 10,00 2,24 1,85 0,15 10,035 9,28212,55 2,08 1,95 0,15 9,096 8,446 12,55 2,18 1,95 0,15 9,991 9,27714,50 2,24 1,95 0,15 10,549 9,796 14,50 2,34 1,95 0,15 11,512 10,69017,10 2,18 2,00 0,15 10,243 9,528 17,10 2,28 2,00 0,15 11,203 10,42119,15 2,35 2,00 0,15 11,820 10,995 19,15 2,45 2,00 0,15 12,850 11,95321,60 2,28 2,05 0,15 11,472 10,690 21,60 2,38 2,05 0,15 12,499 11,64723,70 2,35 2,10 0,15 12,391 11,565 23,70 2,45 2,10 0,15 13,470 12,57225,85 2,38 2,10 0,15 12,757 11,906 25,85 2,48 2,10 0,15 13,851 12,92828,00 2,32 2,15 0,15 12,410 11,600 28,00 2,42 2,15 0,15 13,501 12,621HL L H HP Vh Ve HL L H HP Vh Ve5,55 1,94 1,80 0,15 7,353 6,788 5,55 2,14 1,80 0,15 8,946 8,2587,95 1,98 1,85 0,15 7,849 7,260 7,95 2,08 1,85 0,15 8,661 8,01110,10 2,15 1,85 0,15 9,204 8,514 10,10 2,25 1,85 0,15 10,083 9,32612,35 2,08 1,95 0,15 9,102 8,451 12,35 2,18 1,95 0,15 9,997 9,28314,55 2,12 1,95 0,15 9,474 8,797 14,55 2,22 1,95 0,15 10,387 9,64516,75 2,18 2,00 0,15 10,249 9,534 16,75 2,28 2,00 0,15 11,210 10,42819,05 2,33 2,00 0,15 11,626 10,815 19,05 2,43 2,00 0,15 12,647 11,76521,15 2,28 2,05 0,15 11,479 10,696 21,15 2,38 2,05 0,15 12,506 11,65323,60 2,23 2,10 0,15 11,157 10,413 23,60 2,33 2,10 0,15 12,181 11,36925,30 2,38 2,10 0,15 12,757 11,906 25,30 2,48 2,10 0,15 13,851 12,92827,85 2,33 2,15 0,15 12,434 11,623 27,85 2,43 2,15 0,15 13,527 12,645HL L H HP Vh Ve HL L H HP Vh Ve5,35 1,82 1,80 0,15 6,477 5,979 5,35 2,02 1,80 0,15 7,977 7,3637,75 1,98 1,85 0,15 7,854 7,265 7,75 2,08 1,85 0,15 8,666 8,01710,05 2,13 1,85 0,15 9,028 8,351 10,05 2,23 1,85 0,15 9,898 9,15512,10 2,08 1,95 0,15 9,107 8,457 12,10 2,18 1,95 0,15 10,003 9,28914,45 2,13 1,95 0,15 9,486 8,808 14,45 2,23 1,95 0,15 10,399 9,65616,50 2,18 2,00 0,15 10,255 9,540 16,50 2,28 2,00 0,15 11,216 10,43418,95 2,33 2,00 0,15 11,643 10,830 18,95 2,43 2,00 0,15 12,665 11,78120,80 2,26 2,05 0,15 11,279 10,510 20,80 2,36 2,05 0,15 12,297 11,45923,40 2,23 2,10 0,15 11,163 10,419 23,40 2,33 2,10 0,15 12,188 11,37625,10 2,36 2,10 0,15 12,558 11,721 25,10 2,46 2,10 0,15 13,644 12,73427,75 2,33 2,15 0,15 12,452 11,640 27,75 2,43 2,15 0,15 13,546 12,662HL L H HP Vh Ve HL L H HP Vh Ve5,35 1,52 2,45 0,15 6,035 5,687 5,35 1,52 2,45 0,15 6,035 5,6877,55 1,58 2,55 0,15 6,760 6,384 7,55 1,58 2,55 0,15 6,760 6,38410,00 1,63 2,65 0,15 7,405 7,009 10,00 1,63 2,65 0,15 7,405 7,00911,90 1,68 2,80 0,15 8,364 7,939 11,90 1,68 2,80 0,15 8,364 7,93914,40 1,73 2,90 0,15 9,100 8,653 14,40 1,73 2,90 0,15 9,100 8,65316,25 1,76 3,00 0,15 9,808 9,341 16,25 1,76 3,00 0,15 9,808 9,34118,90 1,83 3,10 0,15 10,868 10,367 18,90 1,83 3,10 0,15 10,868 10,36720,55 1,87 3,20 0,15 11,649 11,127 20,55 1,87 3,20 0,15 11,649 11,12723,35 1,93 3,20 0,15 12,471 11,913 23,35 1,93 3,20 0,15 12,471 11,91324,80 1,96 3,25 0,15 13,101 12,523 24,80 1,96 3,25 0,15 13,101 12,52327,65 2,03 3,30 0,15 14,196 13,579 27,65 2,03 3,30 0,15 14,196 13,579
OP1
-E-C
2,0
-F 2
,7-A
3,0
OP1
-E-C
2,7
-F 3
,3-A
4,0
OP2
-E-C
2,0
-F 2
,7-A
3,0
OP6
-E-C
2,7
-F 3
,3-A
4,0
OP2
-E-C
2,7
-F 3
,3-A
4,0
OP4
-E-C
2,0
-F 2
,7-A
3,0
OP4
-E-C
2,7
-F 3
,3-A
4,0
OP6
-E-C
2,0
-F 2
,7-A
3,0
DENOM. DIMENSIONS (m) VOLUME (m³)
DENOM. DIMENSIONS (m) VOLUME (m³)
28 ÓPALO Model
HEIGHT (m)
HEIGHT (m)
HL L H HP Vh Ve HL L H HP Vh Ve5,40 1,94 1,80 0,15 7,323 6,760 5,40 2,04 1,80 0,15 8,098 7,4768,15 2,00 1,85 0,15 7,998 7,398 8,15 2,20 1,85 0,15 9,678 8,952
10,00 2,14 1,85 0,15 9,159 8,472 10,00 2,24 1,85 0,15 10,035 9,28212,55 2,08 1,95 0,15 9,096 8,446 12,55 2,18 1,95 0,15 9,991 9,27714,50 2,24 1,95 0,15 10,549 9,796 14,50 2,34 1,95 0,15 11,512 10,69017,10 2,18 2,00 0,15 10,243 9,528 17,10 2,28 2,00 0,15 11,203 10,42119,15 2,35 2,00 0,15 11,820 10,995 19,15 2,45 2,00 0,15 12,850 11,95321,60 2,28 2,05 0,15 11,472 10,690 21,60 2,38 2,05 0,15 12,499 11,64723,70 2,35 2,10 0,15 12,391 11,565 23,70 2,45 2,10 0,15 13,470 12,57225,85 2,38 2,10 0,15 12,757 11,906 25,85 2,48 2,10 0,15 13,851 12,92828,00 2,32 2,15 0,15 12,410 11,600 28,00 2,42 2,15 0,15 13,501 12,621HL L H HP Vh Ve HL L H HP Vh Ve5,55 1,64 1,95 0,15 5,661 5,257 5,55 1,84 1,95 0,15 7,124 6,6157,95 1,58 2,05 0,15 5,499 5,124 7,95 1,68 2,05 0,15 6,216 5,793
10,10 1,65 2,10 0,15 6,091 5,685 10,10 1,75 2,10 0,15 6,854 6,39712,35 1,68 2,20 0,15 6,647 6,223 12,35 1,68 2,20 0,15 6,647 6,22314,55 1,72 2,30 0,15 7,282 6,836 14,55 1,72 2,30 0,15 7,282 6,83616,75 1,78 2,40 0,15 8,110 7,633 16,75 1,78 2,40 0,15 8,110 7,63319,05 1,83 2,50 0,15 8,830 8,330 19,05 1,83 2,50 0,15 8,830 8,33021,15 1,88 2,55 0,15 9,586 9,053 21,15 1,88 2,55 0,15 9,586 9,05323,60 1,93 2,60 0,15 10,209 9,652 23,60 1,93 2,60 0,15 10,209 9,65225,30 1,98 2,65 0,15 10,989 10,401 25,30 1,98 2,65 0,15 10,989 10,40127,85 2,03 2,65 0,15 11,483 10,868 27,85 2,03 2,65 0,15 11,483 10,868HL L H HP Vh Ve HL L H HP Vh Ve5,35 1,52 2,30 0,15 5,680 5,332 5,35 1,52 2,30 0,15 5,680 5,3327,75 1,58 2,30 0,15 6,129 5,754 7,75 1,58 2,30 0,15 6,129 5,754
10,05 1,63 2,40 0,15 6,730 6,334 10,05 1,63 2,40 0,15 6,730 6,33412,10 1,68 2,50 0,15 7,502 7,077 12,10 1,68 2,50 0,15 7,502 7,07714,45 1,73 2,60 0,15 8,186 7,739 14,45 1,73 2,60 0,15 8,186 7,73916,50 1,78 2,70 0,15 9,071 8,594 16,50 1,78 2,70 0,15 9,071 8,59418,95 1,83 2,80 0,15 9,847 9,347 18,95 1,83 2,80 0,15 9,847 9,34720,80 1,86 2,90 0,15 10,600 10,079 20,80 1,86 2,90 0,15 10,600 10,07923,40 1,93 2,90 0,15 11,331 10,773 23,40 1,93 2,90 0,15 11,331 10,77325,10 1,96 2,90 0,15 11,747 11,169 25,10 1,96 2,90 0,15 11,747 11,16927,75 2,03 2,95 0,15 12,735 12,118 27,75 2,03 2,95 0,15 12,735 12,119HL L H HP Vh Ve HL L H HP Vh Ve5,35 1,52 2,45 0,15 6,035 5,687 5,35 1,52 2,45 0,15 6,035 5,6877,55 1,58 2,55 0,15 6,760 6,384 7,55 1,58 2,55 0,15 6,760 6,384
10,00 1,63 2,65 0,15 7,405 7,009 10,00 1,63 2,65 0,15 7,405 7,00911,90 1,68 2,80 0,15 8,364 7,939 11,90 1,68 2,80 0,15 8,364 7,93914,40 1,73 2,90 0,15 9,100 8,653 14,40 1,73 2,90 0,15 9,100 8,65316,25 1,76 3,00 0,15 9,808 9,341 16,25 1,76 3,00 0,15 9,808 9,34118,90 1,83 3,10 0,15 10,868 10,367 18,90 1,83 3,10 0,15 10,868 10,36720,55 1,87 3,20 0,15 11,649 11,127 20,55 1,87 3,20 0,15 11,649 11,12723,35 1,93 3,20 0,15 12,471 11,913 23,35 1,93 3,20 0,15 12,471 11,91324,80 1,96 3,25 0,15 13,101 12,523 24,80 1,96 3,25 0,15 13,101 12,52327,65 2,03 3,30 0,15 14,196 13,579 27,65 2,03 3,30 0,15 14,196 13,579
DENOM.DIMENSIONS
(m)VOLUME
(m³) DENOM. DIMENSIONS (m) VOLUME (m³)
OP1
-E-C
2,0
-F 2
,7-A
3,0
OP1
-E-C
2,7
-F 3
,3-A
4,0
OP2
-E-C
2,0
-F 2
,7-A
3,0
OP6
-E-C
2,7
-F 3
,3-A
4,0
OP2
-E-C
2,7
-F 3
,3-A
4,0
OP4
-E-C
2,0
-F 2
,7-A
3,0
OP4
-E-C
2,7
-F 3
,3-A
4,0
OP6
-E-C
2,0
-F 2
,7-A
3,0
JIMÉNEZ
www.grupojbelinchon.com
Serie GEMAS
4. ModelRUBÍ
Overhead Ground Option
31 RUBÍ Model
4.1 OBJECT
This document has been prepared for being a handbook for users of Lattice Metallic Towers, for Metallic Towers, for electric lines up to 32 kV.
FRE
E H
EIG
HT
AF
F
CO
MU
N S
EC
TIO
NS
TO
WE
R T
YPE
HE
AD
C
C
C2
AC
B28
B26
B22
T1
T2
B1818
20
22
24
26
28
B20
B24
MF
F
C
CC
C
C2 C2
D D
B3030
34 B34
AC
FF
C C
C2C2
CC
A
AC
TOWER GEOMETRY
32 RUBÍ Model
4.2 ASSEMBLY DIMENSIONS
C2 C2
C2
C
F
CC
F
AC
AC
A
C
FA
C C
F
C2C2
F
C C
AC
DD
MF
CC
AC C C2 D F A/M
RB2-T-C 3,1-F 2,2-A 4,0 1,20 3,10 3,20 0,00 2,20 4,00RB4-T-C 3,2-F 2,2-A 5,6 1,40 3,20 3,30 0,00 2,20 5,60RB5-T-C 3,3-F 2,2-A 5,6 1,40 3,30 3,40 0,00 2,20 5,60RB9-T-C 3,6-F 2,2-A 6,1 1,40 3,60 3,70 0,00 2,20 6,10
RB2-E-C 3,2-F 3,3-A 4,0 1,20 3,20 3,70 0,00 3,30 4,00RB4-E-C 3,3-F 3,3-A 5,6 1,40 3,30 3,80 0,00 3,30 5,60RB5-E-C 3,4-F 3,3-A 5,6 1,40 3,40 3,90 0,00 3,30 5,60RB9-E-C 3,7-F 3,3-A 6,1 1,40 3,70 4,20 0,00 3,30 6,10
RB2-E-C 3,2-F 3,3-M 2,2 1,20 3,20 3,70 4,60 3,30 2,20RB4-E-C 3,3-F 3,3-M 2,2 1,40 3,30 3,80 4,80 3,30 2,20RB5-E-C 3,4-F 3,3-M 2,2 1,40 3,40 3,90 4,90 3,30 2,20RB9-E-C 3,7-F 3,3-M 2,2 1,40 3,70 4,20 5,20 3,30 2,20
DENOMINATION DIMENSIONS IN (m)
33 RUBÍ Model
4.3 HEIGHTS AND WEIGHTS
The distances HL are calculated combining the sections of the base, between the bottom crossarm and the land level.
Following, the distances are mentioned, the tower weight and base width B.
34 RUBÍ Model
4.4 OVERALL FORCES The total useful forces on the tower are included in the following table, where:
EU Useful transversal resistant load of the tower, simultaneous with the
legal wind overload on the tower. EL Admissible longitudinal resistant load of the tower. ET Admissible longitudinal resistant load of torsion, applied on the
crossarm end. Et Admissible longitudinal resistant load of torsion, applied on the end of
the earth wire. EF Horizontal load, caused by tower failure CS Safety factor of the tower for the required loads. The loads will be considered applied to the height of central crossarm. Coinciding with the previous ones, the loads will be considered due to:
o Wind on the tower (1ª Load case – wind) o Own mass of the tower (every load cases)
Failure forceEF
CS=1,00F V L V T V t v
RB2-T-C 3,1-F 2,2-A 4,0 2502 1950 2806 2816 1550 480 1400 320 3950RB4-T-C 3,2-F 2,2-A 5,6 4233 2180 5103 3750 3100 515 2000 330 6952RB5-T-C 3,3-F 2,2-A 5,6 7666 2180 7686 3750 3100 515 2000 330 12309RB9-T-C 3,6-F 2,2-A 6,1 12055 2180 10524 3750 3100 515 2000 330 19093
RB2-E-C 3,2-F 3,3-A 4,0 2111 3600 2642 5120 856 480 596 320 2832RB4-E-C 3,3-F 3,3-A 5,6 3751 4040 4876 6840 1549 515 1006 330 5888RB5-E-C 3,4-F 3,3-A 5,6 6994 4040 7491 6840 1699 515 1109 330 11043RB9-E-C 3,7-F 3,3-A 6,1 11131 4040 11519 6840 1700 515 1097 330 17065
RB2-E-C 3,2-F 3,3-M 2,2 2109 3900 2573 5632 772 480 538 320 2061RB4-E-C 3,3-F 3,3-M 2,2 3870 4360 4864 7500 1548 515 1006 330 5883RB5-E-C 3,4-F 3,3-M 2,2 7036 4360 7402 7500 1547 515 1010 330 10890RB9-E-C 3,7-F 3,3-M 2,2 11186 4360 11381 7500 1523 515 982 330 16693
DENOMINATION
OVERALL FORCES (daN)
CS=1,50 CS=1,50 CS=1,20 CS=1,20EU EL
Main Load Secondary load
Conductor break
Earth wire break
ET Et
35 RUBÍ Model
4.5 FORCES PER PHASE
The useful loads per phase are included in the following tables, where V-v: Admissible vertical load per conductor and earth wire. H-h: Admissible horizontal transversal per conductor and earth wire L-l: Admissible longitudinal transversal per conductor and earth wire
DENOMINATION DENOMINATION
RB2-T-C 3,1-F 2,2-A 4,0 RB4-T-C 3,2-F 2,2-A 5,6
LOAD CASE CS v h l V H L LOAD CASE CS v h l V H LWind 1,5 300 460 0 550 650 0 Wind 1,5 320 840 0 620 1240 0Ice 1,5 640 230 0 960 325 0 Ice 1,5 660 630 0 1030 970 0End of line 1,5 0 0 0 0 0 0 End of line 1,5 660 0 840 1030 0 1300Unbalanced 1,2 640 0 620 960 0 970 Unbalanced 1,2 660 0 1000 1030 0 1550Conductor break 1,2 640 230 0 480 165 1550 Conductor break 1,2 660 630 0 515 485 3100Earth wire break 1,2 320 115 1400 960 325 0 Earth wire break 1,2 330 315 2000 1030 970 0
DENOMINATION DENOMINATION
RB5-T-C 3,3-F 2,2-A 5,6 RB9-T-C 3,6-F 2,2-A 6,1
LOAD CASE CS v h l V H L LOAD CASE CS v h l V H LWind 1,5 320 1240 0 620 1900 0 Wind 1,5 320 2000 0 620 3000 0Ice 1,5 660 1240 0 1030 1900 0 Ice 1,5 660 2000 0 1030 3100 0End of line 1,5 660 0 1300 1030 0 2000 End of line 1,5 660 0 2000 1030 0 3100Unbalanced 1,2 660 0 1625 1030 0 2500 Unbalanced 1,2 660 0 2500 1030 0 3900Conductor break 1,2 660 1240 0 515 950 3100 Conductor break 1,2 660 2000 0 515 1550 3100Earth wire break 1,2 330 620 2000 1030 1900 0 Earth wire break 1,2 330 1000 2000 1030 3100 0
DENOMINATION DENOMINATION
RB2-E-C 3,2-F 3,3-A 4,0 RB4-E-C 3,3-F 3,3-A 5,6
LOAD CASE CS v h l V H L LOAD CASE CS v h l V H LWind 1,5 300 233 0 550 329 0 Wind 1,5 320 424 0 620 625 0Ice 1,5 640 116 0 960 164 0 Ice 1,5 660 316 0 1030 486 0End of line 1,5 0 0 0 0 0 0 End of line 1,5 660 0 421 1030 0 651Unbalanced 1,2 640 0 310 960 0 484 Unbalanced 1,2 660 0 501 1030 0 776Conductor break 1,2 640 116 0 480 83 856 Conductor break 1,2 660 316 0 515 243 1549Earth wire break 1,2 320 58 596 960 164 0 Earth wire break 1,2 330 158 1006 1030 486 0
DENOMINATION DENOMINATION
RB5-E-C 3,4-F 3,3-A 5,6 RB9-E-C 3,7-F 3,3-A 6,1
LOAD CASE CS v h l V H L LOAD CASE CS v h l V H LWind 1,5 320 681 0 620 1043 0 Wind 1,5 320 1100 0 620 1650 0Ice 1,5 660 681 0 1030 1043 0 Ice 1,5 660 1097 0 1030 1700 0End of line 1,5 660 0 714 1030 0 1098 End of line 1,5 660 0 1097 1030 0 1700Unbalanced 1,2 660 0 892 1030 0 1372 Unbalanced 1,2 660 0 1371 1030 0 2138Conductor break 1,2 660 681 0 515 522 1699 Conductor break 1,2 660 1097 0 515 850 1700Earth wire break 1,2 330 340 1109 1030 1043 0 Earth wire break 1,2 330 549 1097 1030 1700 0
FORCES PER PHASE (daN)
Susp
ensi
on to
wer
ext
ra sa
fety
CT PHASE
FORCES PER PHASE (daN)
CT PHASE
Tens
ion
tow
er a
nd sm
all a
ngle
s
Tens
ion
tow
er a
nd m
ediu
m a
ngle
s FORCES PER PHASE (daN)
CT PHASE
End
of L
ine
FORCES PER PHASE (daN)
CT PHASE
Susp
ensi
on to
wer
ext
ra sa
fety
Tens
ion
tow
er a
nd sm
all a
ngle
s
Tens
ion
tow
er a
nd m
ediu
m a
ngle
s
End
of li
ne
CT PHASE
FORCES PER PHASE (daN)
CT PHASE
FORCES PER PHASE (daN)
CT PHASE
FORCES PER PHASE (daN) FORCES PER PHASE (daN)
CT PHASE
36 RUBÍ Model
DENOMINATION DENOMINATION
RB2-E-C 3,2-F 3,3-M 2,2 RB4-E-C 3,3-F 3,3-M 2,2
LOAD CASE CS v h l V H L LOAD CASE CS v h l V H LWind 1,5 300 209 0 550 295 0 Wind 1,5 320 420 0 620 620 0Ice 1,5 640 104 0 960 147 0 Ice 1,5 660 315 0 1030 485 0End of line 1,5 0 0 0 0 0 0 End of line 1,5 660 0 420 1030 0 650Unbalanced 1,2 640 0 280 960 0 438 Unbalanced 1,2 660 0 500 1030 0 775Conductor break 1,2 640 104 0 480 75 772 Conductor break 1,2 660 315 0 515 242 1548Earth wire break 1,2 320 52 538 960 147 0 Earth wire break 1,2 330 157 1006 1030 485 0
DENOMINACTION DENOMINATION
RB5-E-C 3,4-F 3,3-M 2,2 RB9-E-C 3,7-F 3,3-M 2,2
LOAD CASE CS v h l V H L LOAD CASE CS v h l V H LWind 1,5 320 620 0 620 950 0 Wind 1,5 320 983 0 620 1474 0Ice 1,5 660 620 0 1030 950 0 Ice 1,5 660 982 0 1030 1523 0End of line 1,5 660 0 650 1030 0 1000 End of line 1,5 660 0 982 1030 0 1523Unbalanced 1,2 660 0 812 1030 0 1250 Unbalanced 1,2 660 0 1228 1030 0 1915Conductor break 1,2 660 620 0 515 475 1547 Conductor break 1,2 660 982 0 515 761 1523Earth wire break 1,2 330 310 1010 1030 950 0 Earth wire break 1,2 330 491 982 1030 1523 0
Susp
ensi
on to
wer
ext
ra sa
fety
Tens
ion
tow
er a
nd sm
all a
ngle
s
Tens
ion
tow
er a
nd m
ediu
m a
ngle
s
End
of li
ne
CT FASE CT FASE
FORCES PER PHASE (daN) FORCES PER PHASE (daN)
CT FASE
FORCES PER PHASE (daN)
CT FASE
FORCES PER PHASE (daN)
Coinciding with the previous ones, the loads will be considered due to:
o Wind on the tower (1ª Hypothesis – wind) o Own mass of the tower (every hypothesis)
37 RUBÍ Model
4.6 FOUNDATIONS
The foundations in these towers have separated legs and circular sections. The loads for every anchoring and for every HL height are mentioned in kilos in the following table.
HL (m) 18 20 22 24 26 28 30 34Uplift 11381 11692 12047 12405 12728 13064 13369Compression 14636 14900 15513 16067 16640 17185 17757Uplift 20259 20883 21443 21991 22481 22968 23410Compression 23862 24682 25500 26262 27022 27735 28466Uplift 30550 31414 32181 32909 33560 34204 34777Compression 34493 35446 36479 37436 38370 39255 40132Uplift 42261 43102 43823 44517 45090 45716 46155 47078Compression 46527 47639 48719 49699 50657 51597 52454 54202Uplift 10791 11116 11414 11721 12000 12297 12567Compression 15369 15853 16409 16914 17442 17948 18485Uplift 19180 19711 20190 20666 21093 21523 21914Compression 24447 25174 25911 26601 27297 27953 28633Uplift 31446 32228 32923 33587 34181 34774 35302Compression 36968 37969 38929 39822 40700 41535 42365Uplift 43330 44066 44697 45311 45814 46377 46760 47586Compression 49390 50398 51387 52287 53175 54053 54853 56504Uplift 10393 10707 10997 11298 11570 11861 12126Compression 15241 15716 16264 16761 17283 17783 18315Uplift 20327 20882 21382 21876 22319 22764 23168Compression 25856 26606 27365 28073 28786 29456 30149Uplift 30958 31730 32416 33073 33659 34247 34769Compression 36733 37723 38674 39560 40431 41259 42084Uplift 42025 42745 43363 43966 44458 45012 45387 46198Compression 48370 49362 50337 51226 52104 52972 53764 55402
RB5-E-C 3,4-F 3,3-M 2,2
RB9-E-C 3,7-F 3,3-M 2,2
RB5-E-C 3,4-F 3,3-A 5,6
RB9-E-C 3,7-F 3,3-A 6,1
RB2-E-C 3,2-F 3,3-M 2,2
RB4-E-C 3,3-F 3,3-M 2,2
RB5-T-C 3,3-F 2,2-A 5,6
RB9-T-C 3,6-F 2,2-A 6,1
RB2-E-C 3,2-F 3,3-A 4,0
RB4-E-C 3,3-F 3,3-A 5,6
DENOMINATION LOADS OVER THE FOUNDATIONS (kg)
RB2-T-C 3,1-F 2,2-A 4,0
RB4-T-C 3,2-F 2,2-A 5,6
The sizes (meters) of the foundations in these towers are the mentioned in the following table for every HL height, where:
∅DB: Width of the foundation bottom ∅Di: Bottom width of the foundation ∅DS: Top width of the foundation H: Total foundation height AP: Plint width K: Cellar height J: Height of the conical area H: Total height of the foundation HP: Plint height Vh: Concrete volume Ve: Digging volume
K
H
J
AP
HP
0.05
ØDB
ØDI
ØDS
38 RUBÍ Model
HEIGHT
(m)HL ØDB ØDI ØDS AP K J H HP Vh Ve18 1,20 0,90 0,90 0,80 0,10 0,20 2,00 0,25 1,495 1,36920 1,20 0,90 0,90 0,80 0,10 0,20 2,00 0,25 1,495 1,36922 1,20 0,90 0,90 0,80 0,10 0,20 2,00 0,25 1,495 1,36924 1,20 0,90 0,90 0,80 0,10 0,20 2,00 0,25 1,495 1,36926 1,20 0,90 0,90 0,80 0,10 0,20 2,10 0,25 1,558 1,43328 1,20 0,90 0,90 0,80 0,10 0,20 2,10 0,25 1,558 1,43330 1,20 0,90 0,90 0,80 0,10 0,20 2,10 0,25 1,558 1,433HL ØDB ØDI ØDS AP K J H HP Vh Ve18 1,50 0,90 0,90 0,80 0,10 0,45 2,30 0,25 1,935 1,81020 1,50 0,90 0,90 0,80 0,10 0,45 2,30 0,25 1,935 1,81022 1,55 0,95 0,95 0,80 0,10 0,45 2,30 0,25 2,118 1,99224 1,55 0,95 0,95 0,80 0,10 0,45 2,30 0,25 2,118 1,99226 1,50 0,90 0,90 0,80 0,10 0,45 2,40 0,25 1,999 1,87328 1,50 0,90 0,90 0,80 0,10 0,45 2,40 0,25 1,999 1,87330 1,55 0,95 0,95 0,80 0,10 0,45 2,40 0,25 2,188 2,063HL ØDB ØDI ØDS AP K J H HP Vh Ve18 1,65 1,05 1,05 0,80 0,10 0,45 2,70 0,25 2,856 2,73020 1,65 1,05 1,05 0,80 0,10 0,45 2,70 0,25 2,856 2,73022 1,80 1,20 1,20 0,80 0,10 0,45 2,70 0,25 3,618 3,49224 1,80 1,20 1,20 0,80 0,10 0,45 2,70 0,25 3,618 3,49226 1,80 1,20 1,20 0,80 0,10 0,45 2,80 0,25 3,731 3,60528 1,80 1,20 1,20 0,80 0,10 0,45 2,80 0,25 3,731 3,60530 1,80 1,20 1,20 0,80 0,10 0,45 2,80 0,25 3,731 3,605HL ØDB ØDI ØDS AP K J H HP Vh Ve18 1,95 1,15 1,15 0,80 0,10 0,60 2,95 0,25 3,919 3,79320 1,95 1,15 1,15 0,80 0,10 0,60 2,95 0,25 3,919 3,79322 1,95 1,15 1,15 0,80 0,10 0,60 2,95 0,25 3,919 3,79324 1,95 1,15 1,15 0,80 0,10 0,60 2,95 0,25 3,919 3,79326 2,10 1,30 1,30 0,80 0,10 0,60 3,15 0,25 5,111 4,98528 2,10 1,30 1,30 0,80 0,10 0,60 3,15 0,25 5,111 4,98530 2,10 1,30 1,30 0,80 0,10 0,60 3,15 0,25 5,111 4,98534 2,10 1,30 1,30 0,80 0,10 0,60 3,15 0,25 5,111 4,985HL ØDB ØDI ØDS AP K J H HP Vh Ve18 1,20 0,90 0,90 0,80 0,10 0,45 2,00 0,25 1,554 1,42820 1,20 0,90 0,90 0,80 0,10 0,45 2,00 0,25 1,554 1,42822 1,20 0,90 0,90 0,80 0,10 0,45 2,00 0,25 1,554 1,42824 1,20 0,90 0,90 0,80 0,10 0,45 2,00 0,25 1,554 1,42826 1,20 0,90 0,90 0,80 0,10 0,45 2,10 0,25 1,617 1,49228 1,20 0,90 0,90 0,80 0,10 0,45 2,10 0,25 1,617 1,49230 1,20 0,90 0,90 0,80 0,10 0,45 2,10 0,25 1,617 1,492
RB4-T-C 3,2-F 2,2-A 5,6
DENOMINATION DIMENSIONS (m) VOLUMES (m³)
RB2-T-C 3,1-F 2,2-A 4,0
RB5-T-C 3,3-F 2,2-A 5,6
RB2-E-C 3,2-F 3,3-A 4,0
RB9-T-C 3,6-F 2,2-A 6,1
39 RUBÍ Model
HEIGHT (m)HL ØDB ØDI ØDS AP K J H HP Vh Ve18 1,50 0,90 0,90 0,80 0,10 0,45 2,30 0,25 1,935 1,81020 1,50 0,90 0,90 0,80 0,10 0,45 2,30 0,25 1,935 1,81022 1,50 0,90 0,90 0,80 0,10 0,45 2,30 0,25 1,935 1,81024 1,50 0,90 0,90 0,80 0,10 0,45 2,30 0,25 1,935 1,81026 1,50 0,90 0,90 0,80 0,10 0,45 2,40 0,25 1,999 1,87328 1,50 0,90 0,90 0,80 0,10 0,45 2,40 0,25 1,999 1,87330 1,50 0,90 0,90 0,80 0,10 0,45 2,40 0,25 1,999 1,873HL ØDB ØDI ØDS AP K J H HP Vh Ve18 1,80 1,20 1,20 0,80 0,10 0,45 2,70 0,25 3,618 3,49220 1,80 1,20 1,20 0,80 0,10 0,45 2,70 0,25 3,618 3,49222 1,80 1,20 1,20 0,80 0,10 0,45 2,70 0,25 3,618 3,49224 1,80 1,20 1,20 0,80 0,10 0,45 2,70 0,25 3,618 3,49226 1,80 1,20 1,20 0,80 0,10 0,45 2,80 0,25 3,731 3,60528 1,80 1,20 1,20 0,80 0,10 0,45 2,80 0,25 3,731 3,60530 1,80 1,20 1,20 0,80 0,10 0,45 2,80 0,25 3,731 3,605HL ØDB ØDI ØDS AP K J H HP Vh Ve18 1,95 1,15 1,15 0,80 0,10 0,60 2,95 0,25 3,919 3,79320 1,95 1,15 1,15 0,80 0,10 0,60 2,95 0,25 3,919 3,79322 2,10 1,30 1,30 0,80 0,10 0,60 2,95 0,25 4,846 4,72024 2,10 1,30 1,30 0,80 0,10 0,60 2,95 0,25 4,846 4,72026 2,10 1,30 1,30 0,80 0,10 0,60 3,15 0,25 5,111 4,98528 2,10 1,30 1,30 0,80 0,10 0,60 3,15 0,25 5,111 4,98530 2,10 1,30 1,30 0,80 0,10 0,60 3,15 0,25 5,111 4,98534 2,10 1,30 1,30 0,80 0,10 0,60 3,15 0,25 5,111 4,985HL ØDB ØDI ØDS AP K J H HP Vh Ve18 1,20 0,90 0,90 0,80 0,10 0,45 2,00 0,25 1,554 1,42820 1,20 0,90 0,90 0,80 0,10 0,45 2,00 0,25 1,554 1,42822 1,20 0,90 0,90 0,80 0,10 0,45 2,00 0,25 1,554 1,42824 1,20 0,90 0,90 0,80 0,10 0,45 2,00 0,25 1,554 1,42826 1,20 0,90 0,90 0,80 0,10 0,45 2,10 0,25 1,617 1,49228 1,20 0,90 0,90 0,80 0,10 0,45 2,10 0,25 1,617 1,49230 1,20 0,90 0,90 0,80 0,10 0,45 2,10 0,25 1,617 1,492HL ØDB ØDI ØDS AP K J H HP Vh Ve18 1,50 0,90 0,90 0,80 0,10 0,45 2,30 0,25 1,935 1,81020 1,50 0,90 0,90 0,80 0,10 0,45 2,30 0,25 1,935 1,81022 1,50 0,90 0,90 0,80 0,10 0,45 2,30 0,25 1,935 1,81024 1,55 0,95 0,95 0,80 0,10 0,45 2,30 0,25 2,118 1,99226 1,50 0,90 0,90 0,80 0,10 0,45 2,40 0,25 1,999 1,87328 1,50 0,90 0,90 0,80 0,10 0,45 2,40 0,25 1,999 1,87330 1,50 0,90 0,90 0,80 0,10 0,45 2,40 0,25 1,999 1,873
VOLUME (m³)
RB5-E-C 3,4-F 3,3-A 5,6
RB4-E-C 3,3-F 3,3-M 2,2
RB2-E-C 3,2-F 3,3-M 2,2
RB9-E-C 3,7-F 3,3-A 6,1
DENOMINATIONDIMENSIONS (m)
RB4-E-C 3,3-F 3,3-A 5,6
40 RUBÍ Model
HEIGHT (m)HL ØDB ØDI ØDS AP K J H HP Vh Ve18 1,80 1,20 1,20 0,80 0,10 0,45 2,70 0,25 3,618 3,49220 1,80 1,20 1,20 0,80 0,10 0,45 2,70 0,25 3,618 3,49222 1,80 1,20 1,20 0,80 0,10 0,45 2,70 0,25 3,618 3,49224 1,80 1,20 1,20 0,80 0,10 0,45 2,70 0,25 3,618 3,49226 1,80 1,20 1,20 0,80 0,10 0,45 2,80 0,25 3,731 3,60528 1,80 1,20 1,20 0,80 0,10 0,45 2,80 0,25 3,731 3,60530 1,80 1,20 1,20 0,80 0,10 0,45 2,80 0,25 3,731 3,605HL ØDB ØDI ØDS AP K J H HP Vh Ve18 1,95 1,15 1,15 0,80 0,10 0,60 2,95 0,25 3,919 3,79320 1,95 1,15 1,15 0,80 0,10 0,60 2,95 0,25 3,919 3,79322 1,95 1,15 1,15 0,80 0,10 0,60 2,95 0,25 3,919 3,79324 2,10 1,30 1,30 0,80 0,10 0,60 2,95 0,25 4,846 4,72026 2,10 1,30 1,30 0,80 0,10 0,60 3,15 0,25 5,111 4,98528 2,10 1,30 1,30 0,80 0,10 0,60 3,15 0,25 5,111 4,98530 2,10 1,30 1,30 0,80 0,10 0,60 3,15 0,25 5,111 4,98534 2,10 1,30 1,30 0,80 0,10 0,60 3,15 0,25 5,111 4,985
RB9-E-C 3,7-F 3,3-M 2,2
RB5-E-C 3,4-F 3,3-M 2,2
DENOMINATION DIMENSIONS (m) VOLUMES
(m³)
JIMÉNEZ
www.grupojbelinchon.com
Serie GEMAS
5. ModelTOPACIO
Overhead Ground Option
43 TOPACIO Model
5.1. OBJETO
This document has been prepared for being a handbook for users of Lattice Metallic Towers, for electric lines up to 132 KV. (strengthened structure)
FRE
E H
EIG
HT
AF
F
CO
MU
N S
EC
TIO
N
TO
WE
R T
YP
E
HE
AD
C
C2
B28
B26
B22
T1
T2
B1818
20
22
24
26
28
B20
B24
FF
C
CC
C
C2 C2
B3030
34 B34
D D
M
A
C
AC
CC
C2 C2
CC
FF
AC AC
TOWER GEOMETRY
44 TOPACIO Model
5.2. ASSEMBLY DIMENSIONS
C2 C2
C2
C
F
CC
F
AC
AC
A
C
FA
C C
F
C2C2
F
C C
AC
DD
MF
CC
AC C C2 D F A/MTP1-T-C 3,2-F 2,2-A 3,8 1,40 3,20 3,30 2,20 3,75TP2-T-C 3,2-F 2,2-A 4,0 1,40 3,20 3,30 2,20 3,95TP4-T-C 3,3-F 2,2-A 5,3 1,60 3,30 3,40 2,20 5,30TP5-T-C 3,4-F 2,2-A 5,3 1,60 3,40 3,50 2,20 5,30TP9-T-C 3,2-F 2,2-A 5,3 1,60 3,20 3,30 2,20 5,30TP1-E-C 2,9-F 3,3-A 3,8 1,40 2,90 3,90 3,30 3,75TP2-E-C 3,0-F 3,3-A 4,0 1,40 3,00 4,00 3,30 4,00TP4-E-C 3,4-F 3,3-A 4,2 1,60 3,40 3,90 3,30 4,20TP5-E-C 3,6-F 3,3-A 4,2 1,60 3,60 4,60 3,30 4,20TP9-E-C 3,8-F 3,3-A 4,2 1,60 3,80 4,30 3,30 4,20TP1-E-C 3,3-F 4,4-A 3,8 1,40 3,30 3,80 4,40 3,75TP2-E-C 3,3-F 4,4-A 4,0 1,40 3,30 3,80 4,40 4,00TP4-E-C 3,4-F 4,4-A 5,3 1,60 3,40 3,90 4,40 5,30TP5-E-C 3,5-F 4,4-A 5,3 1,60 3,50 4,00 4,40 5,30TP9-E-C 3,8-F 4,4-A 5,3 1,60 3,80 4,30 4,40 5,30TP1-E-C 2,9-F 3,3-M 1,6 1,40 2,90 3,90 4,20 3,30 1,65TP2-E-C 3,0-F 3,3-M 1,6 1,40 3,00 4,00 4,20 3,30 1,65TP4-E-C 3,4-F 3,3-M 3,4 1,60 3,40 3,90 4,90 3,30 3,35TP5-E-C 3,6-F 3,3-M 3,4 1,60 3,60 4,60 5,00 3,30 3,38TP9-E-C 3,8-F 3,3-M 3,4 1,60 3,80 4,30 5,00 3,30 3,38TP1-E-C 3,3-F 4,4-M 2,2 1,40 3,30 3,80 4,70 4,40 2,20TP2-E-C 3,3-F 4,4-M 2,2 1,40 3,30 3,80 4,70 4,40 2,20TP4-E-C 3,4-F 4,4-M 3,4 1,60 3,40 3,90 4,90 4,40 3,35TP5-E-C 3,5-F 4,4-M 3,4 1,60 3,50 4,00 5,00 4,40 3,38TP9-E-C 3,8-F 4,4-M 3,4 1,60 3,80 4,30 5,00 4,40 3,38
DENOMINATION DIMENSIONS IN (m)
45 TOPACIO Model
5.3. HEIGHTS AND WEIGHTS
The distances HL are calculated combining the sections of the base, between the bottom crossarm and the land level.
Following, the distances are mentioned, the tower weight and base width B.
HL (m) 18 20 22 24 26 28 30 34B 3,89 4,17 4,44 4,72 5,00 5,27 5,55WEIGHT 2735 3051 3383 3697 4093 4428 4850B 3,89 4,17 4,44 4,72 5,00 5,27 5,55WEIGHT 2884 3230 3581 3912 4325 4676 5114B 4,09 4,37 4,65 4,92 5,20 5,48 5,75WEIGHT 4248 4692 5134 5555 6070 6514 7057B 4,09 4,37 4,65 4,92 5,20 5,48 5,75WEIGHT 4983 5490 6031 6527 7133 7653 8290B 4,58 4,91 5,24 5,57 5,90 6,23 6,56 7,22WEIGHT 7039 7747 8614 9309 10273 10989 12018 13850
B 3,89 4,17 4,44 4,72 5,00 5,27 5,55WEIGHT 3129 3462 3794 4108 4504 4839 5261B 3,89 4,17 4,44 4,72 5,00 5,27 5,55WEIGHT 3306 3652 4004 4334 4747 5098 5536B 4,09 4,37 4,65 4,92 5,20 5,48 5,75WEIGHT 4646 5090 5532 5952 6468 6912 7455B 4,09 4,37 4,65 4,92 5,20 5,48 5,75WEIGHT 5466 5973 6514 7011 7616 8136 8773B 4,58 4,91 5,24 5,57 5,90 6,23 6,56 7,22WEIGHT 7854 8563 9430 10125 11089 11805 12834 14665
B 3,89 4,17 4,44 4,72 5,00 5,27 5,55WEIGHT 3347 3680 4012 4326 4722 5057 5479B 3,89 4,17 4,44 4,72 5,00 5,27 5,55WEIGHT 3523 3869 4221 4552 4964 5315 5754B 4,09 4,37 4,65 4,92 5,20 5,48 5,75WEIGHT 4963 5406 5849 6269 6785 7228 7772B 4,09 4,37 4,65 4,92 5,20 5,48 5,75WEIGHT 5825 6331 6872 7369 7974 8494 9131B 4,58 4,91 5,24 5,57 5,90 6,23 6,56 7,22WEIGHT 8437 9146 10012 10707 11672 12387 13416 15248
DENOMINATION HEIGHTS(m), WIDES (m) AND WEIGHTS (kg)
TP2-E-C 3,0-F 3,3-A 4,0
TP1-E-C 2,9-F 3,3-A 3,8
TP1-T-C 3,2-F 2,2-A 3,8
TP2-T-C 3,2-F 2,2-A 4,0
TP4-T-C 3,3-F 2,2-A 5,3
TP9-T-C 3,2-F 2,2-A 5,3
TP5-T-C 3,4-F 2,2-A 5,3
TP4-E-C 3,4-F 3,3-A 4,2
TP5-E-C 3,6-F 3,3-A 4,2
TP9-E-C 3,8-F 3,3-A 4,2
TP4-E-C 3,4-F 4,4-A 5,3
TP1-E-C 3,3-F 4,4-A 3,8
TP2-E-C 3,3-F 4,4-A 4,0
TP5-E-C 3,5-F 4,4-A 5,3
TP9-E-C 3,8-F 4,4-A 5,3
46 TOPACIO Model
HL (m) 18 20 22 24 26 28 30 34B 3,89 4,17 4,44 4,72 5,00 5,27 5,55WEIGHT 3220 3542 3873 4188 4584 4919 5341B 3,89 4,17 4,44 4,72 5,00 5,27 5,55WEIGHT 3420 3766 4117 4448 4860 5212 5650B 4,09 4,37 4,65 4,92 5,20 5,48 5,75WEIGHT 4948 5391 5834 6254 6770 7213 7757B 4,09 4,37 4,65 4,92 5,20 5,48 5,75WEIGHT 5801 6308 6849 7345 7951 8471 9108B 4,58 4,91 5,24 5,57 5,90 6,23 6,56 7,22WEIGHT 8268 8977 9843 10538 11503 12218 13247 15079
B 3,89 4,17 4,44 4,72 5,00 5,27 5,55WEIGHT 3386 3720 4051 4366 4762 5096 5518B 3,89 4,17 4,44 4,72 5,00 5,27 5,55WEIGHT 3585 3931 4283 4614 5026 5378 5816B 4,09 4,37 4,65 4,92 5,20 5,48 5,75WEIGHT 5146 5589 6031 6452 6967 7411 7955B 4,09 4,37 4,65 4,92 5,20 5,48 5,75WEIGHT 6005 6512 7053 7549 8155 8674 9311B 4,58 4,91 5,24 5,57 5,90 6,23 6,56 7,22WEIGHT 8685 9441 10313 11011 11980 12700 13734 15574
TP9-E-C 3,8-F 3,3-M 3,4
TP1-E-C 3,3-F 4,4-M 2,2
TP9-E-C 3,8-F 4,4-M 3,4
TP4-E-C 3,4-F 4,4-M 3,4
TP1-E-C 2,9-F 3,3-M 1,6
TP5-E-C 3,6-F 3,3-M 3,4
TP2-E-C 3,0-F 3,3-M 1,6
TP4-E-C 3,4-F 3,3-M 3,4
HEIGHTS(m), WIDTHS (m) AND WEIGHTS (kg)
TP5-E-C 3,5-F 4,4-M 3,4
DENOMINATION
TP2-E-C 3,3-F 4,4-M 2,2
5.4. OVERALL FORCES
The total useful loads on the tower are included in the following table, where: EU Useful transversal resistant load of the tower, simultaneous
with the legal wind overload on the tower. EL Admissible longitudinal resistant load of the tower. ET Admissible longitudinal resistant load of torsion, applied on
the crossarm end. Et Admissible longitudinal resistant load of torsion, applied on
the end of the earth wire. EF Horizontal load, caused by tower failure CS Safety factor of the tower for the required loads. The loads will be considered applied to the height of central crossarm. Coinciding with the previous ones, the loads will be considered due to:
o Wind on the tower (1ª load case – wind) o Own mass of the tower (every laod case)
47 TOPACIO Model
Faliure forceEF
CS=1,00F V L V T V t V
TP1-T-C 3,2-F 2,2-A 3,8 4879 1950 5211 3520 1785 480 1612 320 7639TP2-T-C 3,2-F 2,2-A 4,0 5924 1950 6192 3520 1785 480 1612 320 9289TP4-T-C 3,3-F 2,2-A 5,3 11865 2180 12562 3750 3441 515 2179 330 18843TP5-T-C 3,4-F 2,2-A 5,3 14863 2180 15527 3750 2514 515 1589 330 23291TP9-T-C 3,2-F 2,2-A 5,3 26824 2180 28788 3750 3333 515 2291 330 43182TP1-E-C 2,9-F 3,3-A 3,8 4361 3600 6352 6400 1963 480 1773 320 5857TP2-E-C 3,0-F 3,3-A 4,0 5462 3600 7722 6400 1958 480 1769 320 7250TP4-E-C 3,4-F 3,3-A 4,2 11053 4040 14797 6840 3286 515 2081 330 17052TP5-E-C 3,6-F 3,3-A 4,2 14601 4040 17413 6840 2182 515 1309 330 22693TP9-E-C 3,8-F 3,3-A 4,2 26844 4040 27511 6840 3825 515 2468 330 41266TP1-E-C 3,3-F 4,4-A 3,8 3971 3600 5954 6400 1830 480 1653 320 5667TP2-E-C 3,3-F 4,4-A 4,0 5005 3600 7235 6400 1801 480 1627 320 7220TP4-E-C 3,4-F 4,4-A 5,3 10230 4040 13679 6840 3496 515 2256 330 16025TP5-E-C 3,5-F 4,4-A 5,3 13251 4040 17535 6840 2944 515 1745 330 20825TP9-E-C 3,8-F 4,4-A 5,3 24698 4040 26266 6840 3460 515 2232 330 38340TP1-E-C 2,9-F 3,3-M 1,6 4378 3900 6258 7040 1769 480 1598 320 5942TP2-E-C 3,0-F 3,3-M 1,6 5409 3900 7573 7040 1643 480 1484 320 7012TP4-E-C 3,4-F 3,3-M 3,4 10873 4360 14442 7500 3264 515 2106 330 16611TP5-E-C 3,6-F 3,3-M 3,4 13999 4360 18214 7500 2000 515 1200 330 21638TP9-E-C 3,8-F 3,3-M 3,4 26122 4360 26720 7500 3377 515 2179 330 40079TP1-E-C 3,3-F 4,4-M 2,2 3927 3900 5784 7040 1550 480 1400 320 4927TP2-E-C 3,3-F 4,4-M 2,2 4968 3900 7059 7040 1550 480 1400 320 6743TP4-E-C 3,4-F 4,4-M 3,4 10055 4360 13102 7500 3100 515 2000 330 15248TP5-E-C 3,5-F 4,4-M 3,4 13292 4360 17438 7500 3100 515 2000 330 20670TP9-E-C 3,8-F 4,4-M 3,4 24229 4360 28232 7500 3100 515 2000 330 37378
DENOMINATION
OVERALL FORCES (daN)
Main force
EU EL ET Et
Secondary force
Conductor break
Earth wire break
CS=1,50 CS=1,50 CS=1,20 CS=1,20
5.5. FORCES PER PHASE
The useful loads per phase are included in the following tables, where
o V-v: Admissible vertical load per conductor and earth wire. o H-h: Admissible horizontal transversal per conductor and earth wire o L-l: Admissible horizontal longitudinal per conductor and earth wire
DENOMINATION DENOMINATION
TP1-T-C 3,2-F 2,2-A 3,8 TP2-T-C 3,2-F 2,2-A 4,0
LOAD CASE CS v h l V H L LOAD CASE CS v h l V H LWind 1,5 300 768 0 550 1031 0 Wind 1,5 300 1010 0 550 1427 0Ice 1,5 640 373 0 960 516 0 Ice 1,5 640 505 0 960 713 0End line 1,5 0 0 0 0 0 0 End line 1,5 0 0 0 0 0 0Unbalanced 1,2 640 0 988 960 0 1471 Unbalanced 1,2 640 0 988 960 0 1514Conductor break 1,2 640 373 0 480 263 1785 Conductor break 1,2 640 505 0 480 362 1785Earth wire break 1,2 320 187 1612 960 516 0 Earth wire break 1,2 320 252 1612 960 713 0
Susp
ensi
on to
wer
ext
ra sa
fetyFORCES PER PHASE (daN)
CT PHASE
Susp
ensi
on to
wer
FORCES PER PHASE (daN)
CT PHASE
48 Model TOPACIO
DENOMINATION DENOMINATION
TP4-T-C 3,3-F 2,2-A 5,3 TP5-T-C 3,4-F 2,2-A 5,3
LOAD CASE CS v h l V H L LOAD CASE CS v h l V H LWind 1,5 320 1835 0 620 2622 0 Wind 1,5 320 2534 0 620 3882 0Ice 1,5 660 1377 0 1030 2120 0 Ice 1,5 660 2534 0 1030 3882 0End line 1,5 660 0 1530 1030 0 2185 End line 1,5 660 0 1471 1030 0 2248Unbalanced 1,2 660 0 1912 1030 0 2731 Unbalanced 1,2 660 0 1921 1030 0 2963Conductor break 1,2 660 1377 0 515 1060 3441 Conductor break 1,2 660 2534 0 515 1941 2514Earth wire break 1,2 330 689 2179 1030 2120 0 Earth wire break 1,2 330 1267 1589 1030 3882 0
DENOMINATION
TP9-T-C 3,2-F 2,2-A 5,3
LOAD CASE CS v h l V H LWind 1,5 320 4163 0 620 6245 0Ice 1,5 660 4582 0 1030 6665 0End line 1,5 660 0 1875 1030 0 2708Unbalanced 1,2 660 0 2344 1030 0 3385Conductor break 1,2 660 3229 0 515 823 3333Earth wire break 1,2 330 1645 2291 1030 4687 0
DENOMINATION DENOMINATION
TP1-E-C 2,9-F 3,3-A 3,8 TP2-E-C 3,0-F 3,3-A 4,0
LOAD CASE CS v h l V H L LOAD CASE CS v h l V H LWind 1,5 300 434 0 550 582 0 Wind 1,5 300 566 0 550 800 0Ice 1,5 640 210 0 960 290 0 Ice 1,5 640 283 0 960 400 0End line 1,5 0 0 0 0 0 0 End line 1,5 0 0 0 0 0 0Unbalanced 1,2 640 0 611 960 0 941 Unbalanced 1,2 640 0 793 960 0 1220Conductor break 1,2 640 210 0 480 148 1963 Conductor break 1,2 640 283 0 480 203 1958Earth wire break 1,2 320 105 1773 960 290 0 Earth wire break 1,2 320 141 1769 960 400 0
DENOMINATION DENOMINATION
TP4-E-C 3,4-F 3,3-A 4,2 TP5-E-C 3,6-F 3,3-A 4,2
LOAD CASE CS v h l V H L LOAD CASE CS v h l V H LWind 1,5 320 928 0 620 1325 0 Wind 1,5 320 1362 0 620 2087 0Ice 1,5 660 692 0 1030 1065 0 Ice 1,5 660 1362 0 1030 2087 0End line 1,5 660 0 901 1030 0 1373 End line 1,5 660 0 1362 1030 0 2087Unbalanced 1,2 660 0 1097 1030 0 1701 Unbalanced 1,2 660 0 1784 1030 0 2745Conductor break 1,2 660 692 0 515 532 3286 Conductor break 1,2 660 1362 0 515 1043 2182Earth wire break 1,2 330 346 2081 1030 1065 0 Earth wire break 1,2 330 681 1309 1030 2087 0
DENOMINATION
TP9-E-C 3,8-F 3,3-A 4,2
HIPÓTESIS CS v h l V H LWind 1,5 320 2476 0 620 3715 0Ice 1,5 660 2468 0 1030 3825 0End line 1,5 660 0 1974 1030 0 3060Unbalanced 1,2 660 0 2466 1030 0 3847Conductor break 1,2 660 2468 0 515 1913 3825Earth wire break 1,2 330 1234 2468 1030 3825 0
CT PHASE
FORCES PER PHASE (daN)
CT
FORCES PER PHASE (daN)
CT PHASE
FORCES PER PHASE (daN)
FORCES PER PHASE (daN)
CT PHASE
FORCES PER PHASE (daN)
FORCES PER PHASE (daN)
CT
CT PHASE
FORCES PER PHASE (daN)
CT PHASE
Tens
ion
tow
er a
nd m
ediu
m a
ngle
s
Tens
ion
tow
er a
nd sm
all a
ngle
s
Tens
ion
tow
er a
nd m
ediu
m a
ngle
s
End
line
FORCES PER PHASE (daN)
CT PHASE
PHASE
Susp
ensi
on to
wer
and
ext
ra sa
fety
Tens
ion
tow
er a
nd sm
all a
ngle
sEn
d lin
eSu
spen
sion
tow
er PHASE
49
DENOMINATION DENOMINATION
TP1-E-C 3,3-F 4,4-A 3,8 TP2-E-C 3,3-F 4,4-A 4,0
LOAD CASE CS v h l V H L LOAD CASE CS v h l V H LWind 1,5 300 404 0 550 543 0 Wind 1,5 300 521 0 550 736 0Ice 1,5 640 196 0 960 271 0 Ice 1,5 640 260 0 960 368 0End line 1,5 0 0 0 0 0 0 End line 1,5 0 0 0 0 0 0Unbalanced 1,2 640 0 569 960 0 877 Unbalanced 1,2 640 0 730 960 0 1123Conductor break 1,2 640 196 0 480 138 1830 Conductor break 1,2 640 260 0 480 187 1801Earth wire break 1,2 320 98 1653 960 271 0 Earth wire break 1,2 320 130 1627 960 368 0
DENOMINATION DENOMINATION
TP4-E-C 3,4-F 4,4-A 5,3 TP5-E-C 3,5-F 4,4-A 5,3
LOAD CASE CS v h l V H L LOAD CASE CS v h l V H LWind 1,5 320 955 0 620 1364 0 Wind 1,5 320 1362 0 620 2087 0Ice 1,5 660 711 0 1030 1095 0 Ice 1,5 660 1362 0 1030 2087 0End line 1,5 660 0 926 1030 0 1412 End line 1,5 660 0 1362 1030 0 2087Unbalanced 1,2 660 0 1128 1030 0 1748 Unbalanced 1,2 660 0 1785 1030 0 2746Conductor break 1,2 660 711 0 515 547 3496 Conductor break 1,2 660 1362 0 515 1044 2944Earth wire break 1,2 330 355 2256 1030 1095 0 Earth wire break 1,2 330 681 1745 1030 2087 0
DENOMINATION
TP9-E-C 3,8-F 4,4-A 5,3
LOAD CASE CS v h l V H LWind 1,5 320 2239 0 620 3358 0Ice 1,5 660 2232 0 1030 3460 0End line 1,5 660 0 2246 1030 0 3256Unbalanced 1,2 660 0 2809 1030 0 4045Conductor break 1,2 660 2232 0 515 1730 3460Earth wire break 1,2 330 1116 2232 1030 3460 0
DENOMINATION DENOMINATION
TP1-E-C 2,9-F 3,3-M 1,6 TP2-E-C 3,0-F 3,3-M 1,6
LOAD CASE CS v h l V H L LOAD CASE CS v h l V H LWind 1,5 300 399 0 550 536 0 Wind 1,5 300 487 0 550 688 0Ice 1,5 640 194 0 960 268 0 Ice 1,5 640 243 0 960 344 0End line 1,5 0 0 0 0 0 0 End line 1,5 0 0 0 0 0 0Unbalanced 1,2 640 0 570 960 0 878 Unbalanced 1,2 640 0 688 960 0 1058Conductor break 1,2 640 194 0 480 137 1769 Conductor break 1,2 640 243 0 480 175 1643Earth wire break 1,2 320 97 1598 960 268 0 Earth wire break 1,2 320 122 1484 960 344 0
DENOMINATION DENOMINATION
TP4-E-C 3,4-F 3,3-M 3,4 TP5-E-C 3,6-F 3,3-M 3,4
LOAD CASE CS v h l V H L LOAD CASE CS v h l V H LWind 1,5 320 885 0 620 1264 0 Wind 1,5 320 1240 0 620 1900 0Ice 1,5 660 663 0 1030 1021 0 Ice 1,5 660 1240 0 1030 1900 0End line 1,5 660 0 863 1030 0 1316 End line 1,5 660 0 1240 1030 0 1900Unbalanced 1,2 660 0 1053 1030 0 1632 Unbalanced 1,2 660 0 1625 1030 0 2500Conductor break 1,2 660 663 0 515 511 3264 Conductor break 1,2 660 1240 0 515 950 2000Earth wire break 1,2 330 332 2106 1030 1021 0 Earth wire break 1,2 330 620 1200 1030 1900 0
FORCES PER PHASE (daN)
FORCES PER PHASE (daN)
PHASE
FORCES PER PHASE (daN)
CT PHASE CT
FORCES PER PHASE (daN)
CT PHASE
Susp
ensi
on to
wer
CT PHASE
End
line
FORCES PER PHASE (daN)
CT PHASE
FORCES PER PHASE (daN)
CT
Tens
ion
tow
er a
nd sm
all a
ngle
s
Tens
ion
tow
er a
nd m
ediu
m a
ngle
sTe
nsio
n to
wer
and
med
ium
angl
esSu
spen
sion
tow
er a
nd e
xtra
safe
ty
Tens
ion
tow
er a
nd sm
all a
ngle
s
CT
FORCES PER PHASE (daN)
PHASE
PHASE
FORCES PER PHASE (daN)
CT PHASE
CT PHASE
Susp
ensi
on to
wer
Susp
ensi
on to
wer
and
ext
ra sa
fety
FORCES PER PHASE (daN)
TOPACIO Model
50
DENOMINATION
TP9-E-C 3,8-F 3,3-M 3,4
LOAD CASE CS v h l V H LWind 1,5 320 2179 0 620 3269 0Ice 1,5 660 2179 0 1030 3377 0End line 1,5 660 0 1743 1030 0 2702Unbalanced 1,2 660 0 2179 1030 0 3399Conductor break 1,2 660 2179 0 515 1689 3377Earth wire break 1,2 330 1089 2179 1030 3377 0
DENOMINATION DENOMINATION
TP1-E-C 3,3-F 4,4-M 2,2 TP2-E-C 3,3-F 4,4-M 2,2
LOAD CASE CS v h l V H L LOAD CASE CS v h l V H LWind 1,5 300 350 0 550 470 0 Wind 1,5 300 460 0 550 650 0Ice 1,5 640 170 0 960 235 0 Ice 1,5 640 230 0 960 325 0End line 1,5 0 0 0 0 0 0 End line 1,5 0 0 0 0 0 0Unbalanced 1,2 640 0 500 960 0 770 Unbalanced 1,2 640 0 650 960 0 1000Conductor break 1,2 640 170 0 480 120 1550 Conductor break 1,2 640 230 0 480 165 1550Earth wire break 1,2 320 85 1400 960 235 0 Earth wire break 1,2 320 115 1400 960 325 0
DENOMINATION DENOMINATION
TP4-E-C 3,4-F 4,4-M 3,4 TP5-E-C 3,5-F 4,4-M 3,4
LOAD CASE CS v h l V H L LOAD CASE CS v h l V H LWind 1,5 320 840 0 620 1200 0 Wind 1,5 320 1240 0 620 1900 0Ice 1,5 660 630 0 1030 970 0 Ice 1,5 660 1240 0 1030 1900 0End line 1,5 660 0 820 1030 0 1250 End line 1,5 660 0 1240 1030 0 1900Unbalanced 1,2 660 0 1000 1030 0 1550 Unbalanced 1,2 660 0 1625 1030 0 2500Conductor break 1,2 660 630 0 515 485 3100 Conductor break 1,2 660 1240 0 515 950 3100Earth wire break 1,2 330 315 2000 1030 970 0 Earth wire break 1,2 330 620 2000 1030 1900 0
DENOMINATION
TP9-E-C 3,8-F 4,4-M 3,4
LOAD CASE CS v h l V H LWind 1,5 320 2000 0 620 3000 0Ice 1,5 660 2000 0 1030 3100 0End line 1,5 660 0 2000 1030 0 3100Unbalanced 1,2 660 0 2500 1030 0 3900Conductor break 1,2 660 2000 0 515 1550 3100Earth wire break 1,2 330 1000 2000 1030 3100 0
CT PHASE
FORCES PER PHASE (daN)
CT PHASE
FORCES PER PHASE (daN)
End
line
FORCES PER PHASE (daN)
CT PHASE
FORCES PER PHASE (daN)
CT PHASE
FORCES PER PHASE (daN)
End
line
FORCES PER PHASE (daN)
CT PHASE
Tens
ion
tow
er a
nd sm
all a
ngle
s
Tens
ion
tow
er a
nd m
ediu
m a
ngle
s
CT PHASE
Susp
ensi
on to
wer
Susp
ensi
on to
wer
and
ext
ra sa
fety
Coinciding with the previous ones, the loads will be considered due to:
o Wind on the tower (Load case – wind) o Own mass of the tower (every load case)
TOPACIO Model
51
5.6. FOUNDATIONS
The foundations in these towers have separated legs and circular sections The loads for every anchoring and for every HL height are mentioned in kilos in the following table.
HL (m) 18 20 22 24 26 28 30 34Uplift 16973 17552 18068 18569 19021 19480 19894Compression 20312 20949 21673 22371 23070 23739 24416Uplift 22946 23636 24264 24864 25404 25944 26431Compression 26239 27145 27993 28800 29597 30357 31118Uplift 40121 41296 42348 43335 44221 45073 45847Compression 44201 45628 46932 48157 49337 50440 51523Uplift 58016 59618 61039 62355 63531 64644 65649Compression 62390 64268 65984 67569 69074 70470 71822Uplift 84761 86284 87564 88696 89620 90472 91148 92886Compression 91453 93361 95113 96622 98071 99312 100547 102680Uplift 18986 19282 19520 19740 19901 20183 20568Compression 24465 24927 25331 25708 26067 26396 26716Uplift 25408 25813 26146 26451 26684 26914 27288Compression 30975 31553 32063 32532 32972 33377 33763Uplift 37379 38401 39319 40186 40966 41721 42409Compression 43107 44382 45551 46657 47730 48737 49734Uplift 57911 59376 60677 61886 62966 63994 64922Compression 63970 65711 67306 68785 70195 71504 72778Uplift 91314 93048 94551 95937 97149 98301 99304 101140Compression 98672 100790 102765 104529 106265 107805 109368 112199
Uplift 18567 18762 18911 19305 19666 20044 20385Compression 24154 24516 24831 25130 25420 25958 26562Uplift 24539 24809 25024 25312 25727 26158 26545Compression 30215 30658 31049 31414 31761 32232 32893Uplift 41416 42317 43127 43899 44593 45272 45890Compression 47324 48477 49539 50549 51537 52468 53395Uplift 62089 63337 64447 65486 66414 67305 68110Compression 68343 69867 71271 72579 73837 75010 76161Uplift 88126 89373 90451 91462 92341 93195 93930 95304Compression 95800 97432 98981 100370 101773 103016 104311 106680
Uplift 19487 19780 20014 20232 20390 20550 20657Compression 25403 25856 26257 26632 26988 27315 27633Uplift 24037 24405 24706 24981 25189 25395 25683Compression 30053 30594 31071 31511 31925 32307 32672Uplift 39798 40810 41718 42577 43349 44098 44779Compression 45942 47206 48366 49463 50529 51530 52520Uplift 58720 60110 61344 62494 63521 64500 65385Compression 65206 66871 68400 69819 71175 72437 73669Uplift 89905 91464 92813 94065 95156 96201 97107 98777Compression 97732 99675 101496 103125 104741 106174 107640 110305
TP2-E-C 3,0-F 3,3-A 4,0
TP4-T-C 3,3-F 2,2-A 5,3
TP5-T-C 3,4-F 2,2-A 5,3
TP9-T-C 3,2-F 2,2-A 5,3
TP1-E-C 2,9-F 3,3-A 3,8
DENOMINATION LOADS OVER THE FOUNDATIONS (kg)
TP1-T-C 3,2-F 2,2-A 3,8
TP2-T-C 3,2-F 2,2-A 4,0
TP4-E-C 3,4-F 3,3-A 4,2
TP5-E-C 3,6-F 3,3-A 4,2
TP9-E-C 3,8-F 3,3-A 4,2
TP1-E-C 3,3-F 4,4-A 3,8
TP2-E-C 3,3-F 4,4-A 4,0
TP4-E-C 3,4-F 4,4-A 5,3
TP5-E-C 3,5-F 4,4-A 5,3
TP9-E-C 3,8-F 4,4-A 5,3
TP1-E-C 2,9-F 3,3-M 1,6
TP2-E-C 3,0-F 3,3-M 1,6
TP4-E-C 3,4-F 3,3-M 3,4
TP5-E-C 3,6-F 3,3-M 3,4
TP9-E-C 3,8-F 3,3-M 3,4
TOPACIO Model
52 Model TOPACIO
HL (m) 18 20 22 24 26 28 30 34Uplift 23924 24253 24539 24814 25080 25327 25760Compression 24122 24356 24540 24712 24843 25254 25624Uplift 30220 30627 30987 31324 31646 31946 32241Compression 40395 41230 41983 42704 43353 43991 44573Uplift 46652 47739 48743 49703 50645 51536 52426Compression 62547 63724 64772 65755 66633 67480 68244Uplift 69144 70596 71938 73191 74399 75527 76638Compression 87650 88781 89748 90663 91455 92232 92898 94152Uplift 95680 97220 98658 99950 101266 102433 103658 105908Compression 95680 97220 98658 99950 101266 102433 103658 105908
LOADS OVER THE FOUNDATIONS (kg)
TP9-E-C 3,8-F 4,4-M 3,4
TP1-E-C 3,3-F 4,4-M 2,2
TP2-E-C 3,3-F 4,4-M 2,2
TP4-E-C 3,4-F 4,4-M 3,4
TP5-E-C 3,5-F 4,4-M 3,4
DENOMINATION
The sizes (meters) of the foundations in these towers are the mentioned in the following table for every HL height, where: ∅DB: Width of the foundation bottom ∅Di: Bottom width of the foundation ∅DS: Top width of the foundation H: Total foundation height AP: Plint width K: Cellar height J: Height of the conical area H: Total height of the foundation HP: Plint height Vh: Concrete volume per leg Ve: Digging volume per leg
HEIGHT (m)HL ØDB ØDI ØDS AP K J H HP Vh Ve18 1,30 0,90 0,90 0,80 0,10 0,30 2,10 0,25 1,628 1,50220 1,30 0,90 0,90 0,80 0,10 0,30 2,10 0,25 1,628 1,50222 1,30 0,90 0,90 0,80 0,10 0,30 2,10 0,25 1,628 1,50224 1,30 0,90 0,90 0,80 0,10 0,30 2,10 0,25 1,628 1,50226 1,30 0,90 0,90 0,80 0,10 0,30 2,20 0,25 1,692 1,56628 1,30 0,90 0,90 0,80 0,10 0,30 2,20 0,25 1,692 1,56630 1,30 0,90 0,90 0,80 0,10 0,30 2,20 0,25 1,692 1,566HL ØDB ØDI ØDS AP K J H HP Vh Ve18 1,30 0,90 0,90 0,80 0,10 0,30 2,10 0,25 1,628 1,50220 1,35 0,95 0,95 0,80 0,10 0,30 2,10 0,25 1,788 1,66322 1,35 0,95 0,95 0,80 0,10 0,30 2,10 0,25 1,788 1,66324 1,45 1,05 1,05 0,80 0,10 0,30 2,10 0,25 2,134 2,00926 1,30 0,90 0,90 0,80 0,10 0,30 2,20 0,25 1,692 1,56628 1,35 0,95 0,95 0,80 0,10 0,30 2,20 0,25 1,859 1,73430 1,35 0,95 0,95 0,80 0,10 0,30 2,20 0,25 1,859 1,734
DENOMINATION DIMENSIONS (m) VOLUMES (m³)
TP1-T-C 3,2-F 2,2-A 3,8
TP2-T-C 3,2-F 2,2-A 4,0
K
H
J
AP
HP
0.05
ØDB
ØDI
ØDS
53
HEIGHT
(m)HL ØDB ØDI ØDS AP K J H HP Vh Ve18 1,55 0,95 0,95 0,80 0,10 0,45 2,55 0,25 2,295 2,16920 1,65 1,05 1,05 0,80 0,10 0,45 2,55 0,25 2,726 2,60022 1,65 1,05 1,05 0,80 0,10 0,45 2,55 0,25 2,726 2,60024 1,65 1,05 1,05 0,80 0,10 0,45 2,55 0,25 2,726 2,60026 1,55 0,95 0,95 0,80 0,10 0,45 2,70 0,25 2,401 2,27628 1,55 0,95 0,95 0,80 0,10 0,45 2,70 0,25 2,401 2,27630 1,65 1,05 1,05 0,80 0,10 0,45 2,70 0,25 2,856 2,730HL ØDB ØDI ØDS AP K J H HP Vh Ve18 1,85 1,15 1,15 0,80 0,10 0,55 2,80 0,25 3,617 3,49220 1,85 1,15 1,15 0,80 0,10 0,55 2,80 0,25 3,617 3,49222 2,00 1,30 1,30 0,80 0,10 0,55 2,80 0,25 4,487 4,36224 2,00 1,30 1,30 0,80 0,10 0,55 2,80 0,25 4,487 4,36226 1,85 1,15 1,15 0,80 0,10 0,55 3,00 0,25 3,825 3,69928 1,85 1,15 1,15 0,80 0,10 0,55 3,00 0,25 3,825 3,69930 1,85 1,15 1,15 0,80 0,10 0,55 3,00 0,25 3,825 3,699HL ØDB ØDI ØDS AP K J H HP Vh Ve18 2,30 1,50 1,50 0,80 0,10 0,60 3,00 0,25 6,332 6,20620 2,55 1,75 1,75 0,80 0,10 0,60 3,00 0,25 8,372 8,24622 2,55 1,75 1,75 0,80 0,10 0,60 3,00 0,25 8,372 8,24624 2,55 1,75 1,75 0,80 0,10 0,60 3,00 0,25 8,372 8,24626 2,30 1,50 1,50 0,80 0,10 0,60 3,20 0,25 6,685 6,56028 2,30 1,50 1,50 0,80 0,10 0,60 3,20 0,25 6,685 6,56030 2,30 1,50 1,50 0,80 0,10 0,60 3,20 0,25 6,685 6,56034 2,30 1,50 1,50 0,80 0,10 0,60 3,20 0,25 6,685 6,560HL ØDB ØDI ØDS AP K J H HP Vh Ve18 1,50 0,90 0,90 0,80 0,10 0,45 2,10 0,25 1,808 1,68220 1,50 0,90 0,90 0,80 0,10 0,45 2,10 0,25 1,808 1,68222 1,50 0,90 0,90 0,80 0,10 0,45 2,10 0,25 1,808 1,68224 1,50 0,90 0,90 0,80 0,10 0,45 2,10 0,25 1,808 1,68226 1,50 0,90 0,90 0,80 0,10 0,45 2,20 0,25 1,872 1,74628 1,50 0,90 0,90 0,80 0,10 0,45 2,20 0,25 1,872 1,74630 1,50 0,90 0,90 0,80 0,10 0,45 2,20 0,25 1,872 1,746HL ØDB ØDI ØDS AP K J H HP Vh Ve18 1,50 0,90 0,90 0,80 0,10 0,45 2,40 0,25 1,999 1,87320 1,50 0,90 0,90 0,80 0,10 0,45 2,40 0,25 1,999 1,87322 1,50 0,90 0,90 0,80 0,10 0,45 2,40 0,25 1,999 1,87324 1,50 0,90 0,90 0,80 0,10 0,45 2,40 0,25 1,999 1,87326 1,50 0,90 0,90 0,80 0,10 0,45 2,50 0,25 2,063 1,93728 1,50 0,90 0,90 0,80 0,10 0,45 2,50 0,25 2,063 1,93730 1,50 0,90 0,90 0,80 0,10 0,45 2,50 0,25 2,063 1,937
TP4-T-C 3,3-F 2,2-A 5,3
TP5-T-C 3,4-F 2,2-A 5,3
TP1-E-C 2,9-F 3,3-A 3,8
TP9-T-C 3,2-F 2,2-A 5,3
DENOMINATION
TP2-E-C 3,0-F 3,3-A 4,0
DIMENSIONS (m) VOLUME (m³)
TOPACIO Model
54
HEIGHT (m)HL ØDB ØDI ØDS AP K J H HP Vh Ve18 1,70 1,00 1,00 0,80 0,10 0,50 2,95 0,25 2,930 2,80420 1,70 1,00 1,00 0,80 0,10 0,50 2,95 0,25 2,930 2,80422 1,70 1,00 1,00 0,80 0,10 0,50 2,95 0,25 2,930 2,80424 1,70 1,00 1,00 0,80 0,10 0,50 2,95 0,25 2,930 2,80426 1,70 1,00 1,00 0,80 0,10 0,50 3,10 0,25 3,048 2,92228 1,70 1,00 1,00 0,80 0,10 0,50 3,10 0,25 3,048 2,92230 1,70 1,00 1,00 0,80 0,10 0,50 3,10 0,25 3,048 2,922HL ØDB ØDI ØDS AP K J H HP Vh Ve18 1,90 1,00 1,00 0,80 0,10 0,60 3,45 0,25 3,592 3,46620 1,90 1,00 1,00 0,80 0,10 0,60 3,45 0,25 3,592 3,46622 1,90 1,00 1,00 0,80 0,10 0,60 3,45 0,25 3,592 3,46624 1,90 1,00 1,00 0,80 0,10 0,60 3,45 0,25 3,592 3,46626 1,90 1,00 1,00 0,80 0,10 0,60 3,60 0,25 3,709 3,58428 1,90 1,00 1,00 0,80 0,10 0,60 3,60 0,25 3,709 3,58430 1,90 1,00 1,00 0,80 0,10 0,60 3,60 0,25 3,709 3,584HL ØDB ØDI ØDS AP K J H HP Vh Ve18 2,40 1,20 1,00 0,80 0,10 0,90 3,60 0,25 5,431 5,30520 2,40 1,20 1,00 0,80 0,10 0,90 3,60 0,25 5,431 5,30522 2,40 1,20 1,00 0,80 0,10 0,90 3,60 0,25 5,431 5,30524 2,40 1,20 1,00 0,80 0,10 0,90 3,60 0,25 5,431 5,30526 2,40 1,20 1,00 0,80 0,10 0,90 3,70 0,25 5,526 5,40028 2,40 1,20 1,00 0,80 0,10 0,90 3,70 0,25 5,526 5,40030 2,40 1,20 1,00 0,80 0,10 0,90 3,70 0,25 5,526 5,40034 2,40 1,20 1,00 0,80 0,10 0,90 3,70 0,25 5,526 5,400HL ØDB ØDI ØDS AP K J H HP Vh Ve18 1,50 0,90 0,90 0,80 0,10 0,45 2,10 0,25 1,808 1,68220 1,50 0,90 0,90 0,80 0,10 0,45 2,10 0,25 1,808 1,68222 1,50 0,90 0,90 0,80 0,10 0,45 2,10 0,25 1,808 1,68224 1,50 0,90 0,90 0,80 0,10 0,45 2,10 0,25 1,808 1,68226 1,50 0,90 0,90 0,80 0,10 0,45 2,20 0,25 1,872 1,74628 1,50 0,90 0,90 0,80 0,10 0,45 2,20 0,25 1,872 1,74630 1,50 0,90 0,90 0,80 0,10 0,45 2,20 0,25 1,872 1,746HL ØDB ØDI ØDS AP K J H HP Vh Ve18 1,50 0,90 0,90 0,80 0,10 0,45 2,40 0,25 1,999 1,87320 1,50 0,90 0,90 0,80 0,10 0,45 2,40 0,25 1,999 1,87322 1,50 0,90 0,90 0,80 0,10 0,45 2,40 0,25 1,999 1,87324 1,50 0,90 0,90 0,80 0,10 0,45 2,40 0,25 1,999 1,87326 1,50 0,90 0,90 0,80 0,10 0,45 2,50 0,25 2,063 1,93728 1,50 0,90 0,90 0,80 0,10 0,45 2,50 0,25 2,063 1,93730 1,50 0,90 0,90 0,80 0,10 0,45 2,50 0,25 2,063 1,937
DENOMINATION DIMENSIONS (m) VOLUME
(m³)
TP2-E-C 3,3-F 4,4-A 4,0
TP4-E-C 3,4-F 3,3-A 4,2
TP5-E-C 3,6-F 3,3-A 4,2
TP1-E-C 3,3-F 4,4-A 3,8
TP9-E-C 3,8-F 3,3-A 4,2
TOPACIO Model
55
HEIGHT (m)HL ØDB ØDI ØDS AP K J H HP Vh Ve18 1,70 1,00 1,00 0,80 0,10 0,50 2,95 0,25 2,930 2,80420 1,70 1,00 1,00 0,80 0,10 0,50 2,95 0,25 2,930 2,80422 1,70 1,00 1,00 0,80 0,10 0,50 2,95 0,25 2,930 2,80424 1,70 1,00 1,00 0,80 0,10 0,50 2,95 0,25 2,930 2,80426 1,70 1,00 1,00 0,80 0,10 0,50 3,10 0,25 3,048 2,92228 1,70 1,00 1,00 0,80 0,10 0,50 3,10 0,25 3,048 2,92230 1,70 1,00 1,00 0,80 0,10 0,50 3,10 0,25 3,048 2,922HL ØDB ØDI ØDS AP K J H HP Vh Ve18 1,90 1,00 1,00 0,80 0,10 0,60 3,45 0,25 3,592 3,46620 1,90 1,00 1,00 0,80 0,10 0,60 3,45 0,25 3,592 3,46622 1,90 1,00 1,00 0,80 0,10 0,60 3,45 0,25 3,592 3,46624 1,90 1,00 1,00 0,80 0,10 0,60 3,45 0,25 3,592 3,46626 1,90 1,00 1,00 0,80 0,10 0,60 3,60 0,25 3,709 3,58428 1,90 1,00 1,00 0,80 0,10 0,60 3,60 0,25 3,709 3,58430 1,90 1,00 1,00 0,80 0,10 0,60 3,60 0,25 3,709 3,584HL ØDB ØDI ØDS AP K J H HP Vh Ve18 2,40 1,20 1,00 0,80 0,10 0,90 3,60 0,25 5,431 5,30520 2,40 1,20 1,00 0,80 0,10 0,90 3,60 0,25 5,431 5,30522 2,40 1,20 1,00 0,80 0,10 0,90 3,60 0,25 5,431 5,30524 2,40 1,20 1,00 0,80 0,10 0,90 3,60 0,25 5,431 5,30526 2,40 1,20 1,00 0,80 0,10 0,90 3,70 0,25 5,526 5,40028 2,40 1,20 1,00 0,80 0,10 0,90 3,70 0,25 5,526 5,40030 2,40 1,20 1,00 0,80 0,10 0,90 3,70 0,25 5,526 5,40034 2,40 1,20 1,00 0,80 0,10 0,90 3,70 0,25 5,526 5,400HL ØDB ØDI ØDS AP K J H HP Vh Ve18 1,50 0,90 0,90 0,80 0,10 0,45 2,10 0,25 1,808 1,68220 1,50 0,90 0,90 0,80 0,10 0,45 2,10 0,25 1,808 1,68222 1,50 0,90 0,90 0,80 0,10 0,45 2,10 0,25 1,808 1,68224 1,50 0,90 0,90 0,80 0,10 0,45 2,10 0,25 1,808 1,68226 1,50 0,90 0,90 0,80 0,10 0,45 2,20 0,25 1,872 1,74628 1,50 0,90 0,90 0,80 0,10 0,45 2,20 0,25 1,872 1,74630 1,50 0,90 0,90 0,80 0,10 0,45 2,20 0,25 1,872 1,746HL ØDB ØDI ØDS AP K J H HP Vh Ve18 1,50 0,90 0,90 0,80 0,10 0,45 2,40 0,25 1,999 1,87320 1,50 0,90 0,90 0,80 0,10 0,45 2,40 0,25 1,999 1,87322 1,50 0,90 0,90 0,80 0,10 0,45 2,40 0,25 1,999 1,87324 1,50 0,90 0,90 0,80 0,10 0,45 2,40 0,25 1,999 1,87326 1,50 0,90 0,90 0,80 0,10 0,45 2,50 0,25 2,063 1,93728 1,50 0,90 0,90 0,80 0,10 0,45 2,50 0,25 2,063 1,93730 1,50 0,90 0,90 0,80 0,10 0,45 2,50 0,25 2,063 1,937
TP5-E-C 3,5-F 4,4-A 5,3
TP1-E-C 2,9-F 3,3-M 1,6
TP9-E-C 3,8-F 4,4-A 5,3
TP2-E-C 3,0-F 3,3-M 1,6
TP4-E-C 3,4-F 4,4-A 5,3
DENOMINATION DIMENSIONS (m) VOLUME
(m³)
TOPACIO Model
56
HEIGHT (m)HL ØDB ØDI ØDS AP K J H HP Vh Ve18 1,70 1,00 1,00 0,80 0,10 0,50 2,95 0,25 2,930 2,80420 1,70 1,00 1,00 0,80 0,10 0,50 2,95 0,25 2,930 2,80422 1,70 1,00 1,00 0,80 0,10 0,50 2,95 0,25 2,930 2,80424 1,70 1,00 1,00 0,80 0,10 0,50 2,95 0,25 2,930 2,80426 1,70 1,00 1,00 0,80 0,10 0,50 3,10 0,25 3,048 2,92228 1,70 1,00 1,00 0,80 0,10 0,50 3,10 0,25 3,048 2,92230 1,70 1,00 1,00 0,80 0,10 0,50 3,10 0,25 3,048 2,922HL ØDB ØDI ØDS AP K J H HP Vh Ve18 1,90 1,00 1,00 0,80 0,10 0,60 3,45 0,25 3,592 3,46620 1,90 1,00 1,00 0,80 0,10 0,60 3,45 0,25 3,592 3,46622 1,90 1,00 1,00 0,80 0,10 0,60 3,45 0,25 3,592 3,46624 1,90 1,00 1,00 0,80 0,10 0,60 3,45 0,25 3,592 3,46626 1,90 1,00 1,00 0,80 0,10 0,60 3,60 0,25 3,709 3,58428 1,90 1,00 1,00 0,80 0,10 0,60 3,60 0,25 3,709 3,58430 1,90 1,00 1,00 0,80 0,10 0,60 3,60 0,25 3,709 3,584HL ØDB ØDI ØDS AP K J H HP Vh Ve18 2,40 1,20 1,00 0,80 0,10 0,90 3,60 0,25 5,431 5,30520 2,40 1,20 1,00 0,80 0,10 0,90 3,60 0,25 5,431 5,30522 2,40 1,20 1,00 0,80 0,10 0,90 3,60 0,25 5,431 5,30524 2,40 1,20 1,00 0,80 0,10 0,90 3,60 0,25 5,431 5,30526 2,40 1,20 1,00 0,80 0,10 0,90 3,70 0,25 5,526 5,40028 2,40 1,20 1,00 0,80 0,10 0,90 3,70 0,25 5,526 5,40030 2,40 1,20 1,00 0,80 0,10 0,90 3,70 0,25 5,526 5,40034 2,40 1,20 1,00 0,80 0,10 0,90 3,70 0,25 5,526 5,400HL ØDB ØDI ØDS AP K J H HP Vh Ve18 1,50 0,90 0,90 0,80 0,10 0,45 2,10 0,25 1,808 1,68220 1,50 0,90 0,90 0,80 0,10 0,45 2,10 0,25 1,808 1,68222 1,50 0,90 0,90 0,80 0,10 0,45 2,10 0,25 1,808 1,68224 1,50 0,90 0,90 0,80 0,10 0,45 2,10 0,25 1,808 1,68226 1,50 0,90 0,90 0,80 0,10 0,45 2,20 0,25 1,872 1,74628 1,50 0,90 0,90 0,80 0,10 0,45 2,20 0,25 1,872 1,74630 1,50 0,90 0,90 0,80 0,10 0,45 2,20 0,25 1,872 1,746HL ØDB ØDI ØDS AP K J H HP Vh Ve18 1,50 0,90 0,90 0,80 0,10 0,45 2,40 0,25 1,999 1,87320 1,50 0,90 0,90 0,80 0,10 0,45 2,40 0,25 1,999 1,87322 1,50 0,90 0,90 0,80 0,10 0,45 2,40 0,25 1,999 1,87324 1,50 0,90 0,90 0,80 0,10 0,45 2,40 0,25 1,999 1,87326 1,50 0,90 0,90 0,80 0,10 0,45 2,50 0,25 2,063 1,93728 1,50 0,90 0,90 0,80 0,10 0,45 2,50 0,25 2,063 1,93730 1,50 0,90 0,90 0,80 0,10 0,45 2,50 0,25 2,063 1,937
DENOMINATION DIMENSIONS (m) VOLUME
(m³)
TP4-E-C 3,4-F 3,3-M 3,4
TP5-E-C 3,6-F 3,3-M 3,4
TP1-E-C 3,3-F 4,4-M 2,2
TP9-E-C 3,8-F 3,3-M 3,4
TP2-E-C 3,3-F 4,4-M 2,2
TOPACIO Model
57
HEIGHT (m)HL ØDB ØDI ØDS AP K J H HP Vh Ve18 1,70 1,00 1,00 0,80 0,10 0,50 2,95 0,25 2,930 2,80420 1,70 1,00 1,00 0,80 0,10 0,50 2,95 0,25 2,930 2,80422 1,70 1,00 1,00 0,80 0,10 0,50 2,95 0,25 2,930 2,80424 1,70 1,00 1,00 0,80 0,10 0,50 2,95 0,25 2,930 2,80426 1,70 1,00 1,00 0,80 0,10 0,50 3,10 0,25 3,048 2,92228 1,70 1,00 1,00 0,80 0,10 0,50 3,10 0,25 3,048 2,92230 1,70 1,00 1,00 0,80 0,10 0,50 3,10 0,25 3,048 2,922HL ØDB ØDI ØDS AP K J H HP Vh Ve18 1,90 1,00 1,00 0,80 0,10 0,60 3,45 0,25 3,592 3,46620 1,90 1,00 1,00 0,80 0,10 0,60 3,45 0,25 3,592 3,46622 1,90 1,00 1,00 0,80 0,10 0,60 3,45 0,25 3,592 3,46624 1,90 1,00 1,00 0,80 0,10 0,60 3,45 0,25 3,592 3,46626 1,90 1,00 1,00 0,80 0,10 0,60 3,60 0,25 3,709 3,58428 1,90 1,00 1,00 0,80 0,10 0,60 3,60 0,25 3,709 3,58430 1,90 1,00 1,00 0,80 0,10 0,60 3,60 0,25 3,709 3,584HL ØDB ØDI ØDS AP K J H HP Vh Ve18 2,40 1,20 1,00 0,80 0,10 0,90 3,60 0,25 5,431 5,30520 2,40 1,20 1,00 0,80 0,10 0,90 3,60 0,25 5,431 5,30522 2,40 1,20 1,00 0,80 0,10 0,90 3,60 0,25 5,431 5,30524 2,40 1,20 1,00 0,80 0,10 0,90 3,60 0,25 5,431 5,30526 2,40 1,20 1,00 0,80 0,10 0,90 3,70 0,25 5,526 5,40028 2,40 1,20 1,00 0,80 0,10 0,90 3,70 0,25 5,526 5,40030 2,40 1,20 1,00 0,80 0,10 0,90 3,70 0,25 5,526 5,40034 2,40 1,20 1,00 0,80 0,10 0,90 3,70 0,25 5,526 5,400
TP4-E-C 3,4-F 4,4-M 3,4
TP5-E-C 3,5-F 4,4-M 3,4
TP9-E-C 3,8-F 4,4-M 3,4
DENOMINATION DIMENSIONS (m) VOLUME
(m³)
TOPACIO Model TOPACIO Model
JIMÉNEZ
www.grupojbelinchon.com
Serie GEMAS
6. ModelAZABACHE
Overhead Ground Option
“
heights
YOUR PROJECT”
CONTACT US for greater
, we customize
61 AZABACHE Model
6.1. OBJECT This document has been prepared for being a handbook for users of Lattice Metallic Towers, for electric lines of 132 kV, with strengthened structure, that allows bigger torsion loads.
B9,45
B11,70
B13,95
B16,2
B18,45
B23
B27,50
T1
T2
T3
T4
T5
9,45
11,70
13,95
16,20
18,45
20,70
23,00
27,50
HE
AD
C
C
C2
FF
A
AC
FRE
E H
EIG
HT
FF
A
C C
C C
C2 C2
AC
TOWER GEOMETRY
62
C2 C2C
F
CC
F
C
AC
AC
A
C
FA
C C
F
6.2. ASSEMBLY DIMENSIONS
AC C C2 F AAZ1-T-C 2,4-F 2,0-A 3,7 1,20 2,40 2,00 3,70AZ1-T-C 2,9-F 2,0-A 4,3 1,20 2,90 2,00 4,30AZ1-T-C 2,4-F 3,0-A 3,7 1,20 2,40 3,00 3,70AZ1-T-C 2,9-F 3,0-A 4,3 1,20 2,90 3,00 4,30AZ2-T-C 2,4-F 2,0-A 3,7 1,20 2,40 2,00 3,70AZ2-T-C 2,9-F 2,0-A 4,3 1,20 2,90 2,00 4,30AZ2-T-C 2,4-F 3,0-A 3,7 1,20 2,40 3,00 3,70AZ2-T-C 2,9-F 3,0-A 4,3 1,20 2,90 3,00 4,30AZ4-T-C 2,4-F 2,0-A 3,7 1,20 2,40 2,00 3,70AZ4-T-C 2,9-F 2,0-A 4,3 1,20 2,90 2,00 4,30AZ4-T-C 2,4-F 3,0-A 3,7 1,20 2,40 3,00 3,70AZ4-T-C 2,9-F 3,0-A 4,3 1,20 2,90 3,00 4,30AZ5-T-C 2,4-F 2,0-A 3,7 1,20 2,40 2,00 3,70AZ5-T-C 2,9-F 2,0-A 4,3 1,20 2,90 2,00 4,30AZ5-T-C 2,4-F 3,0-A 3,7 1,20 2,40 3,00 3,70AZ5-T-C 2,9-F 3,0-A 4,3 1,20 2,90 3,00 4,30AZ9-T-C 2,4-F 2,0-A 3,7 1,20 2,40 2,00 3,70AZ9-T-C 2,9-F 2,0-A 4,3 1,20 2,90 2,00 4,30AZ9-T-C 2,4-F 3,0-A 3,7 1,20 2,40 3,00 3,70AZ9-T-C 2,9-F 3,0-A 4,3 1,20 2,90 3,00 4,30AZ1-E-C 2,4-F 3,0-A 3,7 1,20 2,40 2,90 3,00 3,70AZ2-E-C 2,4-F 3,0-A 3,7 1,20 2,40 2,90 3,00 3,70AZ4-E-C 2,4-F 3,0-A 3,7 1,20 2,40 2,90 3,00 3,70AZ5-E-C 2,4-F 3,0-A 3,7 1,20 2,40 2,90 3,00 3,70AZ9-E-C 2,4-F 3,0-A 3,7 1,20 2,40 2,90 3,00 3,70AZ1-E-C 2,9-F 4,0-A 4,3 1,20 2,90 3,60 4,00 4,30AZ2-E-C 2,9-F 4,0-A 4,3 1,20 2,90 3,60 4,00 4,30AZ4-E-C 2,9-F 4,0-A 4,3 1,20 2,90 3,60 4,00 4,30AZ5-E-C 2,9-F 4,0-A 4,3 1,20 2,90 3,60 4,00 4,30AZ9-E-C 2,9-F 4,0-A 4,3 1,20 2,90 3,60 4,00 4,30
DENOMINATION DIMENSIONS IN (m)
AZABACHE Model
63
6.3. HEIGHTS AND WEIGHTS
The distances HL are calculated combining the sections of the basis, between the bottom crossarm and the land level.
Following, the distances are mentioned, the tower weight and base B width.
DENOMINATIONHEIGHT HL 9,45 11,70 13,95 16,20 18,45 20,70 23,00 27,50WIDTH B 2,45 2,75 3,05 3,35 3,65 3,95 4,25 4,85
AZ1-T-C 2,4-F 2,0-A 3,7 1188 1346 1543 1725 1946 2203 2501 3126AZ1-T-C 2,9-F 2,0-A 4,3 1262 1420 1617 1799 2020 2277 2575 3200AZ1-T-C 2,4-F 3,0-A 3,7 1337 1495 1692 1874 2095 2352 2650 3275AZ1-T-C 2,9-F 3,0-A 4,3 1378 1536 1733 1915 2136 2393 2691 3316AZ2-T-C 2,4-F 2,0-A 3,7 1319 1499 1730 1984 2214 2471 2901 3564AZ2-T-C 2,9-F 2,0-A 4,3 1360 1540 1771 2025 2255 2512 2942 3605AZ2-T-C 2,4-F 3,0-A 3,7 1412 1592 1823 2077 2307 2564 2994 3657AZ2-T-C 2,9-F 3,0-A 4,3 1482 1662 1893 2147 2377 2634 3064 3727AZ4-T-C 2,4-F 2,0-A 3,7 1825 2178 2424 2718 2981 3296 3711 4373AZ4-T-C 2,9-F 2,0-A 4,3 1884 2237 2483 2777 3040 3355 3770 4432AZ4-T-C 2,4-F 3,0-A 3,7 2007 2360 2606 2900 3163 3478 3893 4555AZ4-T-C 2,9-F 3,0-A 4,3 2059 2412 2658 2952 3215 3530 3945 4607AZ5-T-C 2,4-F 2,0-A 3,7 2110 2505 2791 3234 3566 3983 4394 5234AZ5-T-C 2,9-F 2,0-A 4,3 2188 2583 2869 3312 3644 4061 4472 5312AZ5-T-C 2,4-F 3,0-A 3,7 2326 2721 3007 3450 3782 4199 4610 5450AZ5-T-C 2,9-F 3,0-A 4,3 2370 2765 3051 3494 3826 4243 4654 5494AZ9-T-C 2,4-F 2,0-A 3,7 2515 2958 3298 3776 4141 4624 5072 6017AZ9-T-C 2,9-F 2,0-A 4,3 2588 3031 3371 3849 4214 4697 5145 6090AZ9-T-C 2,4-F 3,0-A 3,7 2820 3263 3603 4081 4446 4929 5377 6322AZ9-T-C 2,9-F 3,0-A 4,3 2860 3303 3643 4121 4486 4969 5417 6362AZ1-E-C 2,4-F 3,0-A 3,7 1506 1664 1861 2043 2264 2521 2819 3444AZ2-E-C 2,4-F 3,0-A 3,7 1617 1797 2028 2282 2512 2769 3199 3862AZ4-E-C 2,4-F 3,0-A 3,7 2202 2555 2801 3095 3358 3673 4088 4750AZ5-E-C 2,4-F 3,0-A 3,7 2531 2926 3212 3655 3987 4404 4815 5655AZ9-E-C 2,4-F 3,0-A 3,7 3021 3464 3804 4282 4647 5130 5578 6523AZ1-E-C 2,9-F 4,0-A 4,3 1729 1887 2084 2266 2487 2744 3042 3667AZ2-E-C 2,9-F 4,0-A 4,3 1839 2019 2250 2504 2734 2991 3421 4084AZ4-E-C 2,9-F 4,0-A 4,3 2471 2824 3070 3364 3627 3942 4357 5019AZ5-E-C 2,9-F 4,0-A 4,3 2759 3154 3440 3883 4215 4632 5043 5883AZ9-E-C 2,9-F 4,0-A 4,3 3273 3716 4056 4534 4899 5382 5830 6775
weight
weight
weight
HEIGHTS (m), WIDES (m) AND WEIGHTS (kg)
weight
weight
weight
weight
AZABACHE Model
64
6.4. OVERALL FORCES
The total useful loads on the tower are included in the following table, where: EU Useful transversal resistant load of the tower,
simultaneous with the legal wind overload on the tower. EL Admissible longitudinal resistant load of the tower. ET Admissible longitudinal resistant load of torsion, applied
on the crossarm end. Et Admissible longitudinal resistant load of torsion, applied
on the end of the earth wire. EF Horizontal load, caused by tower failure. CS Safety factor of the tower for the required loads. The loads will be considered applied to the height of central crossarm. Coinciding with the previous ones, the loads will be considered due to:
o Wind on the tower (1ª Load case– wind) o Own mass of the tower (every load case)
Failure forceEF
CS=1,00F V L V T V t v
AZ1-T-C 2,4-F 2,0-A 3,7 3125 2190 3560 4505 2620 885 2000 500 5283AZ1-T-C 2,9-F 2,0-A 4,3 3125 2190 3560 4505 2300 885 2000 500 5303AZ1-T-C 2,4-F 3,0-A 3,7 2665 2190 3100 4505 2620 885 2000 500 4867AZ1-T-C 2,9-F 3,0-A 4,3 2665 2190 3100 4505 2300 885 2000 500 4891AZ2-T-C 2,4-F 2,0-A 3,7 6000 2190 6610 4505 2620 885 2000 500 9225AZ2-T-C 2,9-F 2,0-A 4,3 6000 2190 6610 4505 2300 885 2000 500 9217AZ2-T-C 2,4-F 3,0-A 3,7 5140 2190 5840 4505 2620 885 2000 500 8664AZ2-T-C 2,9-F 3,0-A 4,3 5140 2190 5840 4505 2300 885 2000 500 8616AZ4-T-C 2,4-F 2,0-A 3,7 9000 2190 9530 4505 5125 885 2300 500 13101AZ4-T-C 2,9-F 2,0-A 4,3 9000 2190 9530 4505 4500 885 2300 500 13063AZ4-T-C 2,4-F 3,0-A 3,7 8145 2190 8375 4505 5125 885 2300 500 12118AZ4-T-C 2,9-F 3,0-A 4,3 8145 2190 8375 4505 4500 885 2300 500 12094AZ5-T-C 2,4-F 2,0-A 3,7 14000 2190 14400 4505 5125 885 2300 500 21250AZ5-T-C 2,9-F 2,0-A 4,3 14000 2190 14400 4505 4500 885 2300 500 21198AZ5-T-C 2,4-F 3,0-A 3,7 11800 2190 12370 4505 5125 885 2300 500 18794AZ5-T-C 2,9-F 3,0-A 4,3 11800 2190 12370 4505 4500 885 2300 500 18663AZ9-T-C 2,4-F 2,0-A 3,7 18000 2190 18000 4505 5125 885 2300 500 27351AZ9-T-C 2,9-F 2,0-A 4,3 18000 2190 18000 4505 4500 885 2300 500 27119AZ9-T-C 2,4-F 3,0-A 3,7 15355 2190 15355 4505 5125 885 2300 500 23153AZ9-T-C 2,9-F 3,0-A 4,3 15355 2190 15355 4505 4500 885 2300 500 22962
CS=1,50 CS=1,50 CS=1,20 CS=1,20
DENOMINATION
OVERALL FORCES (daN)
Main force Secondary force
Conductor break
Earth wire break
EU EL ET Et
AZABACHE Model
65
Failure forceEF
CS=1,00F V L V T V t v
AZ1-E-C 2,4-F 3,0-A 3,7 2665 4140 3100 8300 2300 885 2000 500 4333AZ2-E-C 2,4-F 3,0-A 3,7 5140 4140 5840 8300 2300 885 2000 500 8244AZ4-E-C 2,4-F 3,0-A 3,7 8145 4140 8375 8300 4500 885 2300 500 11782AZ5-E-C 2,4-F 3,0-A 3,7 11800 4140 12370 8300 4500 885 2300 500 18848AZ9-E-C 2,4-F 3,0-A 3,7 15355 4140 15355 8300 4500 885 2300 500 23523
AZ1-E-C 2,9-F 4,0-A 4,3 2180 4140 2420 8300 2000 885 2000 500 3854AZ2-E-C 2,9-F 4,0-A 4,3 4195 4140 4465 8300 2000 885 2000 500 7165AZ4-E-C 2,9-F 4,0-A 4,3 6410 4140 6990 8300 3850 885 2300 500 10190AZ5-E-C 2,9-F 4,0-A 4,3 10130 4140 10400 8300 3850 885 2300 500 15167AZ9-E-C 2,9-F 4,0-A 4,3 14325 4140 14325 8300 3850 885 2300 500 20307
DENOMINATION
OVERALL FORCES (daN)
Main force Secondary force
Conductor break
Earth wire break
EU EL ET EtCS=1,50 CS=1,50 CS=1,20 CS=1,20
6.5. FORCES PER PHASE The useful loads per phase are included in the following tables, where
o V-v: Admissible vertical load per conductor and earth wire. o H-h: Admissible horizontal transversal per conductor and earth wire o L-l: Admissible horizontal longitudinal per conductor and earth wire
DENOMINATION DENOMINATION
AZ1-T-C 2,4-F 2,0-A 3,7 AZ1-T-C 2,9-F 2,0-A 4,3
LOAD CASE CS v h l V H L LOAD CASE CS v h l V H LWind 1,5 240 538 0 650 828 0 Wind 1,5 240 536 0 650 825 0Ice 1,5 710 613 0 1265 943 0 Ice 1,5 710 611 0 1265 940 0End line 1,5 568 0 490 1012 0 754 End line 1,5 568 0 489 1012 0 752Unbalanced 1,2 710 0 613 1265 0 943 Unbalanced 1,2 710 0 611 1265 0 940Conductor break 1,2 710 0 0 885 0 2620 Conductor break 1,2 710 0 0 885 0 2300Earth wire break 1,2 500 0 2000 1265 0 0 Earth wire break 1,2 500 0 2000 1265 0 0DENOMINATION DENOMINATION
AZ1-T-C 2,4-F 3,0-A 3,7 AZ1-T-C 2,9-F 3,0-A 4,3
LOAD CASE CS v h l V H L LOAD CASE CS v h l V H LWind 1,5 240 457 0 650 703 0 Wind 1,5 240 455 0 650 700 0Ice 1,5 710 531 0 1265 817 0 Ice 1,5 710 529 0 1265 815 0End line 1,5 568 0 425 1012 0 654 End line 1,5 568 0 424 1012 0 652Unbalanced 1,2 710 0 531 1265 0 817 Unbalanced 1,2 710 0 529 1265 0 815Conductor break 1,2 710 0 0 885 0 2620 Conductor break 1,2 710 0 0 885 0 2300Earth wire break 1,2 500 0 2000 1265 0 0 Earth wire break 1,2 500 0 2000 1265 0 0DENOMINATION DENOMINATION
AZ2-T-C 2,4-F 2,0-A 3,7 AZ2-T-C 2,9-F 2,0-A 4,3
LOAD CASE CS v h l V H L LOAD CASE CS v h l V H LWind 1,5 240 1033 0 650 1589 0 Wind 1,5 240 1029 0 650 1584 0Ice 1,5 710 1138 0 1265 1751 0 Ice 1,5 710 1134 0 1265 1745 0End line 1,5 568 0 910 1012 0 1401 End line 1,5 561 0 896 999 0 1378Unbalanced 1,2 710 0 1138 1265 0 1751 Unbalanced 1,2 701 0 1120 1249 0 1723Conductor break 1,2 710 0 0 885 0 2620 Conductor break 1,2 710 0 0 885 0 2300Earth wire break 1,2 500 0 2000 1265 0 0 Earth wire break 1,2 500 0 2000 1265 0 0
FORCES PER PHASE (daN)CT PHASE
FORCES PER PHASE (daN)
Susp
ensi
on to
wer
and
ext
ra
safe
ty
FORCES PER PHASE (daN)CT PHASE
Susp
ensi
on to
wer
and
ext
ra
safe
ty
CT PHASE
Susp
ensi
on to
wer
Susp
ensi
on to
wer
Susp
ensi
on to
wer
FORCES PER PHASE (daN)CT PHASE
FORCES PER PHASE (daN)CT PHASE
Susp
ensi
on to
wer
FORCES PER PHASE (daN)CT PHASE
AZABACHE Model
66
DENOMINATION DENOMINATIONAZ2-T-C 2,4-F 3,0-A 3,7 AZ2-T-C 2,9-F 3,0-A 4,3
LOAD CASE CS v h l V H L LOAD CASE CS v h l V H LWind 1,5 240 881 0 650 1355 0 Wind 1,5 240 878 0 650 1351 0Ice 1,5 710 1001 0 1265 1540 0 Ice 1,5 710 997 0 1265 1535 0End line 1,5 568 0 801 1012 0 1232 End line 1,5 554 0 778 987 0 1197Unbalanced 1,2 710 0 1001 1265 0 1540 Unbalanced 1,2 692 0 973 1233 0 1496Conductor break 1,2 710 0 0 885 0 2620 Conductor break 1,2 710 0 0 885 0 2300Earth wire 1,2 500 0 2000 1265 0 0 Earth wire 1,2 500 0 2000 1265 0 0DENOMINATION DENOMINATIONAZ4-T-C 2,4-F 2,0-A 3,7 AZ4-T-C 2,9-F 2,0-A 4,3
LOAD CASE CS v h l V H L LOAD CASE CS v h l V H LWind 1,5 240 1549 0 650 2384 0 Wind 1,5 240 1544 0 650 2375 0Ice 1,5 710 1641 0 1265 2524 0 Ice 1,5 710 1635 0 1265 2515 0End line 1,5 604 0 1395 1075 0 2145 End line 1,5 604 0 1390 1075 0 2138Unbalanced 1,2 754 0 1743 1344 0 2682 Unbalanced 1,2 754 0 1737 1344 0 2673Conductor break 1,2 710 0 0 885 0 5125 Conductor break 1,2 710 0 0 885 0 4500Earth wire 1,2 500 0 2300 1265 0 0 Earth wire 1,2 500 0 2300 1265 0 0DENOMINATION DENOMINATION
AZ4-T-C 2,4-F 3,0-A 3,7 AZ4-T-C 2,9-F 3,0-A 4,3
LOAD CASE CS v h l V H L LOAD CASE CS v h l V H LWind 1,5 240 1396 0 650 2147 0 Wind 1,5 240 1391 0 650 2140 0Ice 1,5 710 1435 0 1265 2208 0 Ice 1,5 710 1430 0 1265 2201 0End line 1,5 604 0 1220 1075 0 1877 End line 1,5 604 0 1216 1075 0 1871Unbalanced 1,2 754 0 1525 1344 0 2346 Unbalanced 1,2 754 0 1520 1344 0 2338Conductor break 1,2 710 0 0 885 0 5125 Conductor break 1,2 710 0 0 885 0 4500Earth wire 1,2 500 0 2300 1265 0 0 Earth wire 1,2 500 0 2300 1265 0 0DENOMINATION DENOMINATION
AZ5-T-C 2,4-F 2,0-A 3,7 AZ5-T-C 2,9-F 2,0-A 4,3
LOAD CASE CS v h l V H L LOAD CASE CS v h l V H LWind 1,5 240 2410 0 650 3708 0 Wind 1,5 240 2402 0 650 3695 0Ice 1,5 710 2479 0 1265 3814 0 Ice 1,5 710 2470 0 1265 3801 0End line 1,5 483 0 1686 860 0 2593 End line 1,5 483 0 1680 860 0 2584Unbalanced 1,2 604 0 2107 1075 0 3242 Unbalanced 1,2 604 0 2100 1075 0 3231Conductor break 1,2 710 0 0 885 0 5125 Conductor break 1,2 710 0 0 885 0 4500Earth wire 1,2 500 0 2300 1265 0 0 Earth wire 1,2 500 0 2300 1265 0 0DENOMINATION DENOMINATION
AZ5-T-C 2,4-F 3,0-A 3,7 AZ5-T-C 2,9-F 3,0-A 4,3
LOAD CASE CS v h l V H L LOAD CASE CS v h l V H LWind 1,5 240 2022 0 650 3111 0 Wind 1,5 240 2015 0 650 3101 0Ice 1,5 710 2120 0 1265 3261 0 Ice 1,5 710 2113 0 1265 3250 0End line 1,5 483 0 1442 860 0 2218 End line 1,5 483 0 1437 860 0 2210Unbalanced 1,2 604 0 1802 1075 0 2772 Unbalanced 1,2 604 0 1796 1075 0 2763Conductor break 1,2 710 0 0 885 0 5125 Conductor break 1,2 710 0 0 885 0 4500Earth wire 1,2 500 0 2300 1265 0 0 Earth wire 1,2 500 0 2300 1265 0 0DENOMINATION DENOMINATION
AZ9-T-C 2,4-F 2,0-A 3,7 AZ9-T-C 2,9-F 2,0-A 4,3
LOAD CASE CS v h l V H L LOAD CASE CS v h l V H LWind 1,5 240 3099 0 650 4767 0 Wind 1,5 240 3088 0 650 4751 0Ice 1,5 710 3099 0 1265 4767 0 Ice 1,5 710 3088 0 1265 4751 0End line 1,5 454 0 1983 810 0 3051 End line 1,5 511 0 2223 911 0 3421Unbalanced 1,2 568 0 2479 1012 0 3814 Unbalanced 1,2 639 0 2779 1139 0 4276Conductor break 1,2 710 0 0 885 0 5125 Conductor break 1,2 710 0 0 885 0 4500Earth wire 1,2 500 0 2300 1265 0 0 Earth wire 1,2 500 0 2300 1265 0 0
End
line
End
line
FORCES PER PHASE (daN)CT PHASE
FORCES PER PHASE (daN)CT PHASE
FORCES PER PHASE (daN)CT PHASE
CT PHASE
FORCES PER PHASE (daN)CT PHASE
Tens
ion
tow
er a
nd m
ediu
m
angl
es
Tens
ion
tow
er a
nd sm
all
angl
es
Tens
ion
tow
er a
nd sm
all
angl
esFORCES PER PHASE (daN)
Tens
ion
tow
er a
nd m
ediu
m
angl
es
FORCES PER PHASE (daN)CT PHASE
CT PHASE
Tens
ion
tow
er a
nd m
ediu
m
angl
es
Tens
ion
tow
er a
nd m
ediu
m
angl
es
FORCES PER PHASE (daN)
Susp
ensi
on to
wer
and
ext
ra
safe
ty
Susp
ensi
on to
wer
and
ext
ra
safe
ty
FORCES PER PHASE (daN)CT PHASE
FORCES PER PHASE (daN)CT
Tens
ion
tow
er a
nd sm
all
angl
es
FORCES PER PHASE (daN)CT PHASE
Tens
ion
tow
er a
nd sm
all
angl
es
FORCES PER PHASE (daN)CT PHASE
CT PHASE
FORCES PER PHASE (daN)
PHASE
AZABACHE Model
67
DENOMINATION DENOMINATIONAZ9-T-C 2,4-F 3,0-A 3,7 AZ9-T-C 2,9-F 3,0-A 4,3
LOAD CASE CS v h l V H L LOAD CASE CS v h l V H LWind 1,5 240 2632 0 650 4048 0 Wind 1,5 240 2623 0 650 4035 0Ice 1,5 710 2632 0 1265 4048 0 Ice 1,5 710 2623 0 1265 4035 0End line 1,5 511 0 1895 911 0 2915 End line 1,5 511 0 1888 911 0 2905Unbalanced 1,2 639 0 2368 1139 0 3644 Unbalanced 1,2 639 0 2360 1139 0 3631Conductor break 1,2 710 0 0 885 0 5125 Conductor break 1,2 710 0 0 885 0 4500Earth wire break 1,2 500 0 2300 1265 0 0 Earth wire break 1,2 500 0 2300 1265 0 0
DENOMINATION DENOMINATIONAZ1-E-C 2,4-F 3,0-A 3,7 AZ1-E-C 2,9-F 4,0-A 4,3
LOAD CASE CS v h l V H L LOAD CASE CS v h l V H LWind 1,5 240 255 0 650 392 0 Wind 1,5 240 208 0 650 320 0Ice 1,5 710 297 0 1265 456 0 Ice 1,5 710 231 0 1265 355 0End line 1,5 568 0 237 1012 0 365 End line 1,5 568 0 184 1012 0 284Unbalanced 1,2 710 0 297 1265 0 456 Unbalanced 1,2 710 0 231 1265 0 355Conductor break 1,2 710 0 0 885 0 2300 Conductor break 1,2 710 0 0 885 0 2000Earth wire break 1,2 500 0 2000 1265 0 0 Earth wire break 1,2 500 0 2000 1265 0 0DENOMINATION DENOMINATIONAZ2-E-C 2,4-F 3,0-A 3,7 AZ2-E-C 2,9-F 4,0-A 4,3
LOAD CASE CS v h l V H L LOAD CASE CS v h l V H LWind 1,5 240 492 0 650 757 0 Wind 1,5 240 400 0 650 615 0Ice 1,5 710 559 0 1265 860 0 Ice 1,5 710 425 0 1265 655 0End line 1,5 568 0 447 1012 0 688 End line 1,5 568 0 340 1012 0 524Unbalanced 1,2 710 0 559 1265 0 860 Unbalanced 1,2 710 0 425 1265 0 655Conductor break 1,2 710 0 0 885 0 2300 Conductor break 1,2 710 0 0 885 0 2000Earth wire break 1,2 500 0 2000 1265 0 0 Earth wire break 1,2 500 0 2000 1265 0 0DENOMINATION DENOMINATIONAZ4-E-C 2,4-F 3,0-A 3,7 AZ4-E-C 2,9-F 4,0-A 4,3
LOAD CASE CS v h l V H L LOAD CASE CS v h l V H LWind 1,5 240 779 0 650 1199 0 Wind 1,5 240 611 0 650 940 0Ice 1,5 710 801 0 1265 1233 0 Ice 1,5 710 666 0 1265 1025 0End line 1,5 604 0 681 1075 0 1048 End line 1,5 604 0 566 1075 0 871Unbalanced 1,2 754 0 851 1344 0 1310 Unbalanced 1,2 754 0 708 1344 0 1089Conductor break 1,2 710 0 0 885 0 4500 Conductor break 1,2 710 0 0 885 0 3850Earth wire break 1,2 500 0 2300 1265 0 0 Earth wire break 1,2 500 0 2300 1265 0 0DENOMINATION DENOMINATIONAZ5-E-C 2,4-F 3,0-A 3,7 AZ5-E-C 2,9-F 4,0-A 4,3
LOAD CASE CS v h l V H L LOAD CASE CS v h l V H LWind 1,5 240 1129 0 650 1737 0 Wind 1,5 240 965 0 650 1485 0Ice 1,5 710 1184 0 1265 1821 0 Ice 1,5 710 991 0 1265 1525 0End line 1,5 483 0 805 860 0 1238 End line 1,5 483 0 674 860 0 1037Unbalanced 1,2 604 0 1006 1075 0 1548 Unbalanced 1,2 604 0 842 1075 0 1296Conductor break 1,2 710 0 0 885 0 4500 Conductor break 1,2 710 0 0 885 0 3850Earth wire break 1,2 500 0 2300 1265 0 0 Earth wire break 1,2 500 0 2300 1265 0 0DENOMINATION DENOMINATIONAZ9-E-C 2,4-F 3,0-A 3,7 AZ9-E-C 2,9-F 4,0-A 4,3
LOAD CASE CS v h l V H L LOAD CASE CS v h l V H LWind 1,5 240 1469 0 650 2260 0 Wind 1,5 240 1365 0 650 2100 0Ice 1,5 710 1469 0 1265 2260 0 Ice 1,5 710 1365 0 1265 2100 0End line 1,5 511 0 1058 911 0 1628 End line 1,5 511 0 983 911 0 1512Unbalanced 1,2 639 0 1322 1139 0 2034 Unbalanced 1,2 639 0 1229 1139 0 1890Conductor break 1,2 710 0 0 885 0 4500 Conductor break 1,2 710 0 0 885 0 3850Earth wire break 1,2 500 0 2300 1265 0 0 Earth wire break 1,2 500 0 2300 1265 0 0
CT PHASE
FORCES PER PHASE (daN)CT PHASECT PHASE
FORCES PER PHASE (daN)CT PHASE
FORCES PER PHASE (daN)CT PHASE
FORCES PER PHASE (daN)CT
End
line
End
line
FORCES PER PHASE (daN)CT PHASE
FORCES PER PHASE (daN)CT PHASE
FORCES PER PHASE (daN)
FORCES PER PHASE (daN)
CT PHASE
Susp
ensi
on to
wer
de
segu
ridad
refo
rzad
a
Tens
ion
tow
er a
nd sm
all
angl
es
Tens
ion
tow
er a
nd sm
all
angl
es
Tens
ion
tow
er a
nd m
ediu
m
angl
es
Tens
ion
tow
er a
nd m
ediu
m
angl
es
Susp
ensi
on to
wer
and
ext
ra
safe
ty
CT PHASE
FORCES PER PHASE (daN)
FORCES PER PHASE (daN)CT PHASE
PHASE
FORCES PER PHASE (daN)
CT PHASE
Susp
ensi
on to
wer
Susp
ensi
on to
wer
End
line
End
line
FORCES PER PHASE (daN)
90
AZABACHE Model
68
Coinciding with the previous ones, the loads will be considered due to:
o Wind on the tower (1ª load case – wind) o Own mass of the tower (every load case)
6.6. FOUNDATIONS
The foundations in these towers have separated legs and circular sections
The loads for every anchoring and for every HL height are mentioned in kilos in the following table :
HL (m) 9,45 11,70 13,95 16,20 18,45 20,70 23,00 27,50Uplift 11548 12403 13127 13766 14333 14858 15335 16237Compression 14526 15389 16100 16710 17358 18053 18774 20128Uplift 11544 12397 13121 13758 14324 14849 15325 16226Compression 14408 15279 15996 16654 17379 18074 18794 20147Uplift 11045 11706 12275 12785 13244 13678 14076 14850Compression 13873 14525 15071 15730 16349 16954 17595 18821Uplift 11028 11689 12258 12768 13227 13661 14058 14833Compression 13748 14410 15084 15743 16362 16966 17607 18834
Uplift 22369 23800 24992 26027 26924 27732 28455 29766Compression 26006 27479 28681 29695 30558 31319 32070 33873Uplift 22426 23843 25025 26051 26941 27743 28461 29763Compression 25943 27411 28608 29619 30479 31237 32105 33899Uplift 21194 22255 23150 23940 24633 25268 25839 26907Compression 25119 26211 27107 27870 28522 29105 29656 31094Uplift 21239 22291 23178 23962 24650 25280 25847 26909Compression 25034 26125 27020 27782 28434 29016 29572 31126
Uplift 33561 35571 37225 38643 39856 40943 41927 43619Compression 37128 39201 40890 42316 43550 44873 46116 48383Uplift 33662 35646 37279 38680 39877 40952 41926 43600Compression 37123 39178 40853 42268 43618 44928 46161 48411Uplift 33420 34943 36205 37301 38244 39103 39887 41259Compression 36376 38094 39557 40872 42041 43134 44178 46125Uplift 33516 35017 36263 37345 38276 39124 39900 41258Compression 36508 38205 39651 40952 42109 43192 44227 46160
Uplift 52313 55302 57743 59822 61571 63129 64520 66893Compression 55482 58525 61220 63548 65594 67427 69119 72103Uplift 52520 55462 57866 59914 61638 63173 64545 66888Compression 55569 58719 61380 63678 65698 67509 69182 72135Uplift 48365 50459 52182 53668 54924 56061 57085 58872Compression 52072 54230 56005 57509 59062 60474 61799 64196Uplift 48530 50589 52283 53746 54982 56102 57111 58875Compression 52109 54241 55994 57624 59156 60552 61862 64236
AZ1-T-C 2,4-F 3,0-A 3,7
DENOMINATIONLOADS OVER THE FOUNDATIONS (kg)
AZ1-T-C 2,4-F 2,0-A 3,7
AZ1-T-C 2,9-F 2,0-A 4,3
AZ2-T-C 2,4-F 2,0-A 3,7
AZ2-T-C 2,4-F 3,0-A 3,7
AZ1-T-C 2,9-F 3,0-A 4,3
AZ4-T-C 2,9-F 2,0-A 4,3
AZ4-T-C 2,4-F 2,0-A 3,7
AZ2-T-C 2,9-F 2,0-A 4,3
AZ2-T-C 2,9-F 3,0-A 4,3
AZ4-T-C 2,4-F 3,0-A 3,7
AZ4-T-C 2,9-F 3,0-A 4,3
AZ5-T-C 2,4-F 2,0-A 3,7
AZ5-T-C 2,9-F 2,0-A 4,3
AZ5-T-C 2,4-F 3,0-A 3,7
AZ5-T-C 2,9-F 3,0-A 4,3
AZABACHE Model
69
HL (m) 9,45 11,70 13,95 16,20 18,45 20,70 23,00 27,50Uplift 67347 71114 74205 76820 79031 80956 82672 85570Compression 70451 74526 77886 80779 83279 85558 87634 91264Uplift 67630 71333 74374 76948 79124 81020 82710 85567Compression 70780 74792 78102 80953 83418 85667 87718 91307Uplift 62929 65576 67768 69642 71234 72633 73890 76054Compression 66232 69188 71648 73800 75681 77434 79051 81947Uplift 63162 65759 67910 69751 71316 72692 73927 76059Compression 66501 69407 71827 73946 75800 77529 79126 81989Uplift 10496 11158 11727 12237 12696 13130 13528 14302Compression 16030 16642 17149 17591 17975 18321 18667 19841Uplift 20438 21551 22488 23312 24034 24693 25285 26387Compression 27024 28132 29042 29815 30476 31066 31624 32554Uplift 32376 34011 35364 36535 37540 38451 39282 40728Compression 37317 38902 40267 41657 42888 44034 45124 47145Uplift 46969 49251 51124 52734 54094 55318 56420 58329Compression 53373 55682 57577 59169 60530 61711 62758 65223Uplift 61192 64100 66501 68546 70282 71804 73167 75501Compression 66065 69281 71951 74274 76300 78174 79899 82965Uplift 9711 10197 10623 11017 11379 11730 12055 12714Compression 14216 14613 15145 15687 16209 16731 17299 18410Uplift 18462 19237 19903 20503 21039 21539 21993 22874Compression 23102 23792 24521 25281 25994 26689 27413 28786Uplift 28006 29078 29978 30775 31469 32115 32715 33791Compression 34241 35309 36189 36949 37597 38177 38786 40438Uplift 44093 45678 46990 48139 49114 50010 50826 52278Compression 49082 50774 52344 53742 55013 56185 57302 59364Uplift 62302 64463 66264 67817 69141 70312 71369 73214Compression 67341 69811 71881 73711 75324 76848 78266 80844
AZ2-E-C 2,9-F 4,0-A 4,3
AZ4-E-C 2,9-F 4,0-A 4,3
AZ9-E-C 2,9-F 4,0-A 4,3
AZ9-T-C 2,4-F 3,0-A 3,7
AZ9-T-C 2,9-F 3,0-A 4,3
AZ1-E-C 2,4-F 3,0-A 3,7
AZ2-E-C 2,4-F 3,0-A 3,7
AZ5-E-C 2,9-F 4,0-A 4,3
AZ4-E-C 2,4-F 3,0-A 3,7
AZ5-E-C 2,4-F 3,0-A 3,7
AZ1-E-C 2,9-F 4,0-A 4,3
AZ9-T-C 2,4-F 2,0-A 3,7
AZ9-T-C 2,9-F 2,0-A 4,3
DENOMINATION
AZ9-E-C 2,4-F 3,0-A 3,7
LOADS OVER THE FOUNDATIONS (kg)
The sizes (meters) of the foundations in these towers are the mentioned in the following table for every HL height, where: ∅DB: Width of the foundation bottom ∅DI: Bottom width of the foundation ∅DS: Top width of the foundation AP: Plint width K: Cellar height J: Height of the conical area H: Total height of the foundation HP: Plint height Vh: Concrete volume per leg Ve: Digging volume per leg
K
H
J
AP
HP
0.05
ØDB
ØDI
ØDS
AZABACHE Model
70
HEIGHT (m)HL ØDB ØDI ØDS AP K J H HP Vh Ve9,45 1,30 0,90 0,90 0,80 0,10 0,30 1,70 0,25 1,374 1,24811,70 1,30 0,90 0,90 0,80 0,10 0,30 1,70 0,25 1,374 1,24813,95 1,30 0,90 0,90 0,80 0,10 0,30 1,70 0,25 1,374 1,24816,20 1,30 0,90 0,90 0,80 0,10 0,30 1,80 0,25 1,437 1,31218,45 1,30 0,90 0,90 0,80 0,10 0,30 1,80 0,25 1,437 1,31220,70 1,30 0,90 0,90 0,80 0,10 0,30 1,90 0,25 1,501 1,37523,00 1,30 0,90 0,90 0,80 0,10 0,30 1,90 0,25 1,501 1,37527,50 1,60 1,20 1,20 0,80 0,10 0,30 1,95 0,25 2,545 2,419HL ØDB ØDI ØDS AP K J H HP Vh Ve
9,45 1,30 0,90 0,90 0,80 0,10 0,30 1,70 0,25 1,374 1,24811,70 1,30 0,90 0,90 0,80 0,10 0,30 1,70 0,25 1,374 1,24813,95 1,30 0,90 0,90 0,80 0,10 0,30 1,70 0,25 1,374 1,24816,20 1,30 0,90 0,90 0,80 0,10 0,30 1,80 0,25 1,437 1,31218,45 1,30 0,90 0,90 0,80 0,10 0,30 1,80 0,25 1,437 1,31220,70 1,30 0,90 0,90 0,80 0,10 0,30 1,90 0,25 1,501 1,37523,00 1,30 0,90 0,90 0,80 0,10 0,30 1,90 0,25 1,501 1,37527,50 1,60 1,20 1,20 0,80 0,10 0,30 1,95 0,25 2,545 2,419
HL ØDB ØDI ØDS AP K J H HP Vh Ve
9,45 1,30 0,90 0,90 0,80 0,10 0,30 1,70 0,25 1,374 1,24811,70 1,30 0,90 0,90 0,80 0,10 0,30 1,70 0,25 1,374 1,24813,95 1,30 0,90 0,90 0,80 0,10 0,30 1,70 0,25 1,374 1,24816,20 1,30 0,90 0,90 0,80 0,10 0,30 1,80 0,25 1,437 1,31218,45 1,30 0,90 0,90 0,80 0,10 0,30 1,80 0,25 1,437 1,31220,70 1,30 0,90 0,90 0,80 0,10 0,30 1,90 0,25 1,501 1,37523,00 1,30 0,90 0,90 0,80 0,10 0,30 1,90 0,25 1,501 1,37527,50 1,45 1,05 1,05 0,80 0,10 0,30 1,95 0,25 2,004 1,879
HL ØDB ØDI ØDS AP K J H HP Vh Ve
9,45 1,30 0,90 0,90 0,80 0,10 0,30 1,70 0,25 1,374 1,24811,70 1,30 0,90 0,90 0,80 0,10 0,30 1,70 0,25 1,374 1,24813,95 1,30 0,90 0,90 0,80 0,10 0,30 1,70 0,25 1,374 1,24816,20 1,30 0,90 0,90 0,80 0,10 0,30 1,80 0,25 1,437 1,31218,45 1,30 0,90 0,90 0,80 0,10 0,30 1,80 0,25 1,437 1,31220,70 1,30 0,90 0,90 0,80 0,10 0,30 1,90 0,25 1,501 1,37523,00 1,30 0,90 0,90 0,80 0,10 0,30 1,90 0,25 1,501 1,37527,50 1,45 1,05 1,05 0,80 0,10 0,30 1,95 0,25 2,004 1,879
HL ØDB ØDI ØDS AP K J H HP Vh Ve
9,45 1,40 1,00 1,00 0,80 0,10 0,30 2,25 0,25 2,075 1,94911,70 1,40 1,00 1,00 0,80 0,10 0,30 2,25 0,25 2,075 1,94913,95 1,40 1,00 1,00 0,80 0,10 0,30 2,25 0,25 2,075 1,94916,20 1,40 1,00 1,00 0,80 0,10 0,30 2,35 0,25 2,154 2,02818,45 1,40 1,00 1,00 0,80 0,10 0,30 2,35 0,25 2,154 2,02820,70 1,40 1,00 1,00 0,80 0,10 0,30 2,45 0,25 2,232 2,10623,00 1,40 1,00 1,00 0,80 0,10 0,30 2,45 0,25 2,232 2,10627,50 1,70 1,30 1,30 0,80 0,10 0,30 2,55 0,25 3,740 3,614
AZ1-T-C 2,9-F 2,0-A 4,3
AZ1-T-C 2,4-F 3,0-A 3,7
AZ1-T-C 2,9-F 3,0-A 4,3
AZ2-T-C 2,4-F 2,0-A 3,7
VOLUME (m³)
AZ1-T-C 2,4-F 2,0-A 3,7
DENOMINATIONDIMENSIONS (m)
AZABACHE Model
71
HEIGHT (m)HL ØDB ØDI ØDS AP K J H HP Vh Ve
9,45 1,40 1,00 1,00 0,80 0,10 0,30 2,25 0,25 2,075 1,94911,70 1,40 1,00 1,00 0,80 0,10 0,30 2,25 0,25 2,075 1,94913,95 1,40 1,00 1,00 0,80 0,10 0,30 2,25 0,25 2,075 1,94916,20 1,40 1,00 1,00 0,80 0,10 0,30 2,35 0,25 2,154 2,02818,45 1,40 1,00 1,00 0,80 0,10 0,30 2,35 0,25 2,154 2,02820,70 1,40 1,00 1,00 0,80 0,10 0,30 2,45 0,25 2,232 2,10623,00 1,40 1,00 1,00 0,80 0,10 0,30 2,45 0,25 2,232 2,10627,50 1,70 1,30 1,30 0,80 0,10 0,30 2,55 0,25 3,740 3,614
HL ØDB ØDI ØDS AP K J H HP Vh Ve
9,45 1,40 1,00 1,00 0,80 0,10 0,30 2,25 0,25 2,075 1,94911,70 1,40 1,00 1,00 0,80 0,10 0,30 2,25 0,25 2,075 1,94913,95 1,40 1,00 1,00 0,80 0,10 0,30 2,25 0,25 2,075 1,94916,20 1,40 1,00 1,00 0,80 0,10 0,30 2,35 0,25 2,154 2,02818,45 1,40 1,00 1,00 0,80 0,10 0,30 2,35 0,25 2,154 2,02820,70 1,40 1,00 1,00 0,80 0,10 0,30 2,45 0,25 2,232 2,10623,00 1,40 1,00 1,00 0,80 0,10 0,30 2,45 0,25 2,232 2,10627,50 1,55 1,15 1,15 0,80 0,10 0,30 2,55 0,25 2,980 2,854
HL ØDB ØDI ØDS AP K J H HP Vh Ve
9,45 1,40 1,00 1,00 0,80 0,10 0,30 2,25 0,25 2,075 1,94911,70 1,40 1,00 1,00 0,80 0,10 0,30 2,25 0,25 2,075 1,94913,95 1,40 1,00 1,00 0,80 0,10 0,30 2,25 0,25 2,075 1,94916,20 1,40 1,00 1,00 0,80 0,10 0,30 2,35 0,25 2,154 2,02818,45 1,40 1,00 1,00 0,80 0,10 0,30 2,35 0,25 2,154 2,02820,70 1,40 1,00 1,00 0,80 0,10 0,30 2,45 0,25 2,232 2,10623,00 1,40 1,00 1,00 0,80 0,10 0,30 2,45 0,25 2,232 2,10627,50 1,55 1,15 1,15 0,80 0,10 0,30 2,55 0,25 2,980 2,854
HL ØDB ØDI ØDS AP K J H HP Vh Ve
9,45 1,60 1,10 1,10 0,80 0,10 0,40 2,60 0,25 2,901 2,77611,70 1,60 1,10 1,10 0,80 0,10 0,40 2,60 0,25 2,901 2,77613,95 1,60 1,10 1,10 0,80 0,10 0,40 2,60 0,25 2,901 2,77616,20 1,60 1,10 1,10 0,80 0,10 0,40 2,70 0,25 2,997 2,87118,45 1,60 1,10 1,10 0,80 0,10 0,40 2,70 0,25 2,997 2,87120,70 1,60 1,10 1,10 0,80 0,10 0,40 2,74 0,25 3,035 2,90923,00 1,60 1,10 1,10 0,80 0,10 0,40 2,74 0,25 3,035 2,90927,50 2,10 1,60 1,60 0,80 0,10 0,40 2,75 0,25 6,078 5,952
HL ØDB ØDI ØDS AP K J H HP Vh Ve
9,45 1,60 1,10 1,10 0,80 0,10 0,40 2,60 0,25 2,901 2,77611,70 1,60 1,10 1,10 0,80 0,10 0,40 2,60 0,25 2,901 2,77613,95 1,60 1,10 1,10 0,80 0,10 0,40 2,60 0,25 2,901 2,77616,20 1,60 1,10 1,10 0,80 0,10 0,40 2,70 0,25 2,997 2,87118,45 1,60 1,10 1,10 0,80 0,10 0,40 2,70 0,25 2,997 2,87120,70 1,60 1,10 1,10 0,80 0,10 0,40 2,74 0,25 3,035 2,90923,00 1,60 1,10 1,10 0,80 0,10 0,40 2,74 0,25 3,035 2,90927,50 2,10 1,60 1,60 0,80 0,10 0,40 2,75 0,25 6,078 5,952
DENOMINATION DIMENSIONS (m) VOLUME (m³)
AZ2-T-C 2,9-F 2,0-A 4,3
AZ2-T-C 2,4-F 3,0-A 3,7
AZ2-T-C 2,9-F 3,0-A 4,3
AZ4-T-C 2,4-F 2,0-A 3,7
AZ4-T-C 2,9-F 2,0-A 4,3
AZABACHE Model
72
HEIGHT (m)HL ØDB ØDI ØDS AP K J H HP Vh Ve
9,45 1,60 1,10 1,10 0,80 0,10 0,40 2,60 0,25 2,901 2,77611,70 1,60 1,10 1,10 0,80 0,10 0,40 2,60 0,25 2,901 2,77613,95 1,60 1,10 1,10 0,80 0,10 0,40 2,60 0,25 2,901 2,77616,20 1,60 1,10 1,10 0,80 0,10 0,40 2,70 0,25 2,997 2,87118,45 1,60 1,10 1,10 0,80 0,10 0,40 2,70 0,25 2,997 2,87120,70 1,60 1,10 1,10 0,80 0,10 0,40 2,74 0,25 3,035 2,90923,00 1,60 1,10 1,10 0,80 0,10 0,40 2,74 0,25 3,035 2,90927,50 2,10 1,60 1,60 0,80 0,10 0,40 2,75 0,25 6,078 5,952
HL ØDB ØDI ØDS AP K J H HP Vh Ve
9,45 1,60 1,10 1,10 0,80 0,10 0,40 2,60 0,25 2,901 2,77611,70 1,60 1,10 1,10 0,80 0,10 0,40 2,60 0,25 2,901 2,77613,95 1,60 1,10 1,10 0,80 0,10 0,40 2,60 0,25 2,901 2,77616,20 1,60 1,10 1,10 0,80 0,10 0,40 2,70 0,25 2,997 2,87118,45 1,60 1,10 1,10 0,80 0,10 0,40 2,70 0,25 2,997 2,87120,70 1,60 1,10 1,10 0,80 0,10 0,40 2,74 0,25 3,035 2,90923,00 1,60 1,10 1,10 0,80 0,10 0,40 2,74 0,25 3,035 2,90927,50 2,10 1,60 1,60 0,80 0,10 0,40 2,75 0,25 6,078 5,952
HL ØDB ØDI ØDS AP K J H HP Vh Ve
9,45 1,90 1,30 1,30 0,80 0,10 0,50 3,00 0,25 4,612 4,48611,70 1,90 1,30 1,30 0,80 0,10 0,50 3,00 0,25 4,612 4,48613,95 1,90 1,30 1,30 0,80 0,10 0,50 3,00 0,25 4,612 4,48616,20 1,90 1,30 1,30 0,80 0,10 0,50 3,10 0,25 4,745 4,61918,45 1,90 1,30 1,30 0,80 0,10 0,50 3,10 0,25 4,745 4,61920,70 1,90 1,30 1,30 0,80 0,10 0,50 3,15 0,25 4,811 4,68523,00 1,90 1,30 1,30 0,80 0,10 0,50 3,15 0,25 4,811 4,68527,50 2,65 2,05 2,05 0,80 0,10 0,50 3,20 0,25 11,439 11,314
HL ØDB ØDI ØDS AP K J H HP Vh Ve
9,45 1,90 1,30 1,30 0,80 0,10 0,50 3,00 0,25 4,612 4,48611,70 1,90 1,30 1,30 0,80 0,10 0,50 3,00 0,25 4,612 4,48613,95 1,90 1,30 1,30 0,80 0,10 0,50 3,00 0,25 4,612 4,48616,20 1,90 1,30 1,30 0,80 0,10 0,50 3,10 0,25 4,745 4,61918,45 1,90 1,30 1,30 0,80 0,10 0,50 3,10 0,25 4,745 4,61920,70 1,90 1,30 1,30 0,80 0,10 0,50 3,15 0,25 4,811 4,68523,00 1,90 1,30 1,30 0,80 0,10 0,50 3,15 0,25 4,811 4,68527,50 2,65 2,05 2,05 0,80 0,10 0,50 3,20 0,25 11,439 11,314
HL ØDB ØDI ØDS AP K J H HP Vh Ve
9,45 1,90 1,30 1,30 0,80 0,10 0,50 3,00 0,25 4,612 4,48611,70 1,90 1,30 1,30 0,80 0,10 0,50 3,00 0,25 4,612 4,48613,95 1,90 1,30 1,30 0,80 0,10 0,50 3,00 0,25 4,612 4,48616,20 1,90 1,30 1,30 0,80 0,10 0,50 3,10 0,25 4,745 4,61918,45 1,90 1,30 1,30 0,80 0,10 0,50 3,10 0,25 4,745 4,61920,70 1,90 1,30 1,30 0,80 0,10 0,50 3,15 0,25 4,811 4,68523,00 1,90 1,30 1,30 0,80 0,10 0,50 3,15 0,25 4,811 4,68527,50 2,40 1,80 1,80 0,80 0,10 0,50 3,20 0,25 8,938 8,812
AZ4-T-C 2,4-F 3,0-A 3,7
AZ4-T-C 2,9-F 3,0-A 4,3
AZ5-T-C 2,4-F 2,0-A 3,7
DENOMINATION DIMENSIONS (m) VOLUME (m³)
AZ5-T-C 2,9-F 2,0-A 4,3
AZ5-T-C 2,4-F 3,0-A 3,7
AZABACHE Model
73
HEIGHT (m)
HL ØDB ØDI ØDS AP K J H HP Vh Ve
9,45 1,90 1,30 1,30 0,80 0,10 0,50 3,00 0,25 4,612 4,48611,70 1,90 1,30 1,30 0,80 0,10 0,50 3,00 0,25 4,612 4,48613,95 1,90 1,30 1,30 0,80 0,10 0,50 3,00 0,25 4,612 4,48616,20 1,90 1,30 1,30 0,80 0,10 0,50 3,10 0,25 4,745 4,61918,45 1,90 1,30 1,30 0,80 0,10 0,50 3,10 0,25 4,745 4,61920,70 1,90 1,30 1,30 0,80 0,10 0,50 3,15 0,25 4,811 4,68523,00 1,90 1,30 1,30 0,80 0,10 0,50 3,15 0,25 4,811 4,68527,50 2,40 1,80 1,80 0,80 0,10 0,50 3,20 0,25 8,938 8,812
HL ØDB ØDI ØDS AP K J H HP Vh Ve
9,45 2,00 1,40 1,40 0,80 0,10 0,50 3,35 0,25 5,820 5,69411,70 2,00 1,40 1,40 0,80 0,10 0,50 3,35 0,25 5,820 5,69413,95 2,00 1,40 1,40 0,80 0,10 0,50 3,35 0,25 5,820 5,69416,20 2,00 1,40 1,40 0,80 0,10 0,50 3,40 0,25 5,897 5,77118,45 2,05 1,45 1,45 0,80 0,10 0,50 3,40 0,25 6,294 6,16820,70 2,15 1,55 1,55 0,80 0,10 0,60 3,40 0,25 7,210 7,08523,00 2,15 1,55 1,55 0,80 0,10 0,60 3,40 0,25 7,210 7,08527,50 3,05 2,45 2,45 0,80 0,10 0,60 3,45 0,25 17,399 17,273
HL ØDB ØDI ØDS AP K J H HP Vh Ve
9,45 2,00 1,40 1,40 0,80 0,10 0,50 3,35 0,25 5,820 5,69411,70 2,00 1,40 1,40 0,80 0,10 0,50 3,35 0,25 5,820 5,69413,95 2,00 1,40 1,40 0,80 0,10 0,50 3,35 0,25 5,820 5,69416,20 2,00 1,40 1,40 0,80 0,10 0,50 3,40 0,25 5,897 5,77118,45 2,05 1,45 1,45 0,80 0,10 0,50 3,40 0,25 6,294 6,16820,70 2,15 1,55 1,55 0,80 0,10 0,60 3,40 0,25 7,210 7,08523,00 2,15 1,55 1,55 0,80 0,10 0,60 3,40 0,25 7,210 7,08527,50 3,05 2,45 2,45 0,80 0,10 0,60 3,45 0,25 17,399 17,273
HL ØDB ØDI ØDS AP K J H HP Vh Ve
9,45 2,00 1,40 1,40 0,80 0,10 0,50 3,35 0,25 5,820 5,69411,70 2,00 1,40 1,40 0,80 0,10 0,50 3,35 0,25 5,820 5,69413,95 2,00 1,40 1,40 0,80 0,10 0,50 3,35 0,25 5,820 5,69416,20 2,00 1,40 1,40 0,80 0,10 0,50 3,40 0,25 5,897 5,77118,45 2,00 1,40 1,40 0,80 0,10 0,50 3,40 0,25 5,897 5,77120,70 2,00 1,40 1,40 0,80 0,10 0,60 3,40 0,25 5,972 5,84623,00 2,00 1,40 1,40 0,80 0,10 0,60 3,40 0,25 5,972 5,84627,50 2,75 2,15 2,15 0,80 0,10 0,60 3,45 0,25 13,546 13,421
HL ØDB ØDI ØDS AP K J H HP Vh Ve
9,45 2,00 1,40 1,40 0,80 0,10 0,50 3,35 0,25 5,820 5,69411,70 2,00 1,40 1,40 0,80 0,10 0,50 3,35 0,25 5,820 5,69413,95 2,00 1,40 1,40 0,80 0,10 0,50 3,35 0,25 5,820 5,69416,20 2,00 1,40 1,40 0,80 0,10 0,50 3,40 0,25 5,897 5,77118,45 2,00 1,40 1,40 0,80 0,10 0,50 3,40 0,25 5,897 5,77120,70 2,00 1,40 1,40 0,80 0,10 0,60 3,40 0,25 5,972 5,84623,00 2,00 1,40 1,40 0,80 0,10 0,60 3,40 0,25 5,972 5,84627,50 2,75 2,15 2,15 0,80 0,10 0,60 3,45 0,25 13,546 13,421
AZ9-T-C 2,9-F 3,0-A 4,3
AZ5-T-C 2,9-F 3,0-A 4,3
AZ9-T-C 2,4-F 2,0-A 3,7
AZ9-T-C 2,9-F 2,0-A 4,3
AZ9-T-C 2,4-F 3,0-A 3,7
DENOMINATION DIMENSIONS (m) VOLUME (m³)
AZABACHE Model
74 Modelo AZABACHE
HEIGHT(m)HL ØDB ØDI ØDS AP K J H HP Vh Ve
9,45 1,30 0,90 0,90 0,80 0,10 0,30 1,70 0,25 1,374 1,24811,70 1,30 0,90 0,90 0,80 0,10 0,30 1,70 0,25 1,374 1,24813,95 1,30 0,90 0,90 0,80 0,10 0,30 1,70 0,25 1,374 1,24816,20 1,30 0,90 0,90 0,80 0,10 0,30 1,80 0,25 1,437 1,31218,45 1,30 0,90 0,90 0,80 0,10 0,30 1,80 0,25 1,437 1,31220,70 1,30 0,90 0,90 0,80 0,10 0,30 1,90 0,25 1,501 1,37523,00 1,30 0,90 0,90 0,80 0,10 0,30 1,90 0,25 1,501 1,37527,50 1,45 1,05 1,05 0,80 0,10 0,30 1,95 0,25 2,004 1,879
HL ØDB ØDI ØDS AP K J H HP Vh Ve
9,45 1,40 1,00 1,00 0,80 0,10 0,30 2,25 0,25 2,075 1,94911,70 1,40 1,00 1,00 0,80 0,10 0,30 2,25 0,25 2,075 1,94913,95 1,40 1,00 1,00 0,80 0,10 0,30 2,25 0,25 2,075 1,94916,20 1,40 1,00 1,00 0,80 0,10 0,30 2,35 0,25 2,154 2,02818,45 1,40 1,00 1,00 0,80 0,10 0,30 2,35 0,25 2,154 2,02820,70 1,40 1,00 1,00 0,80 0,10 0,30 2,45 0,25 2,232 2,10623,00 1,40 1,00 1,00 0,80 0,10 0,30 2,45 0,25 2,232 2,10627,50 1,70 1,30 1,30 0,80 0,10 0,30 2,55 0,25 3,740 3,614
HL ØDB ØDI ØDS AP K J H HP Vh Ve
9,45 1,60 1,10 1,10 0,80 0,10 0,40 2,60 0,25 2,901 2,77611,70 1,60 1,10 1,10 0,80 0,10 0,40 2,60 0,25 2,901 2,77613,95 1,60 1,10 1,10 0,80 0,10 0,40 2,60 0,25 2,901 2,77616,20 1,60 1,10 1,10 0,80 0,10 0,40 2,70 0,25 2,997 2,87118,45 1,60 1,10 1,10 0,80 0,10 0,40 2,70 0,25 2,997 2,87120,70 1,60 1,10 1,10 0,80 0,10 0,40 2,74 0,25 3,035 2,90923,00 1,60 1,10 1,10 0,80 0,10 0,40 2,74 0,25 3,035 2,90927,50 2,10 1,60 1,60 0,80 0,10 0,40 2,75 0,25 6,078 5,952
HL ØDB ØDI ØDS AP K J H HP Vh Ve
9,45 1,90 1,30 1,30 0,80 0,10 0,50 3,00 0,25 4,612 4,48611,70 1,90 1,30 1,30 0,80 0,10 0,50 3,00 0,25 4,612 4,48613,95 1,90 1,30 1,30 0,80 0,10 0,50 3,00 0,25 4,612 4,48616,20 1,90 1,30 1,30 0,80 0,10 0,50 3,10 0,25 4,745 4,61918,45 1,90 1,30 1,30 0,80 0,10 0,50 3,10 0,25 4,745 4,61920,70 1,90 1,30 1,30 0,80 0,10 0,50 3,15 0,25 4,811 4,68523,00 1,90 1,30 1,30 0,80 0,10 0,50 3,15 0,25 4,811 4,68527,50 2,40 1,80 1,80 0,80 0,10 0,50 3,20 0,25 8,938 8,812
HL ØDB ØDI ØDS AP K J H HP Vh Ve
9,45 2,00 1,40 1,40 0,80 0,10 0,50 3,35 0,25 5,820 5,69411,70 2,00 1,40 1,40 0,80 0,10 0,50 3,35 0,25 5,820 5,69413,95 2,00 1,40 1,40 0,80 0,10 0,50 3,35 0,25 5,820 5,69416,20 2,00 1,40 1,40 0,80 0,10 0,50 3,40 0,25 5,897 5,77118,45 2,00 1,40 1,40 0,80 0,10 0,50 3,40 0,25 5,897 5,77120,70 2,00 1,40 1,40 0,80 0,10 0,60 3,40 0,25 5,972 5,84623,00 2,00 1,40 1,40 0,80 0,10 0,60 3,40 0,25 5,972 5,84627,50 2,75 2,15 2,15 0,80 0,10 0,60 3,45 0,25 13,546 13,421
DIMENSIONS (m) VOLUMES (m³)
AZ4-E-C 2,4-F 3,0-A 3,7
AZ5-E-C 2,4-F 3,0-A 3,7
AZ9-E-C 2,4-F 3,0-A 3,7
AZ1-E-C 2,4-F 3,0-A 3,7
DENOMINATION
AZ2-E-C 2,4-F 3,0-A 3,7
75
HEIGHT (m)HL ØDB ØDI ØDS AP K J H HP Vh Ve
9,45 1,30 0,90 0,90 0,80 0,10 0,30 1,70 0,25 1,374 1,24811,70 1,30 0,90 0,90 0,80 0,10 0,30 1,70 0,25 1,374 1,24813,95 1,30 0,90 0,90 0,80 0,10 0,30 1,70 0,25 1,374 1,24816,20 1,30 0,90 0,90 0,80 0,10 0,30 1,80 0,25 1,437 1,31218,45 1,30 0,90 0,90 0,80 0,10 0,30 1,80 0,25 1,437 1,31220,70 1,30 0,90 0,90 0,80 0,10 0,30 1,90 0,25 1,501 1,37523,00 1,30 0,90 0,90 0,80 0,10 0,30 1,90 0,25 1,501 1,37527,50 1,30 0,90 0,90 0,80 0,10 0,30 1,95 0,25 1,533 1,407
HL ØDB ØDI ØDS AP K J H HP Vh Ve
9,45 1,40 1,00 1,00 0,80 0,10 0,30 2,25 0,25 2,075 1,94911,70 1,40 1,00 1,00 0,80 0,10 0,30 2,25 0,25 2,075 1,94913,95 1,40 1,00 1,00 0,80 0,10 0,30 2,25 0,25 2,075 1,94916,20 1,40 1,00 1,00 0,80 0,10 0,30 2,35 0,25 2,154 2,02818,45 1,40 1,00 1,00 0,80 0,10 0,30 2,35 0,25 2,154 2,02820,70 1,40 1,00 1,00 0,80 0,10 0,30 2,45 0,25 2,232 2,10623,00 1,40 1,00 1,00 0,80 0,10 0,30 2,45 0,25 2,232 2,10627,50 1,55 1,15 1,15 0,80 0,10 0,30 2,55 0,25 2,980 2,854
HL ØDB ØDI ØDS AP K J H HP Vh Ve
9,45 1,60 1,10 1,10 0,80 0,10 0,40 2,60 0,25 2,901 2,77611,70 1,60 1,10 1,10 0,80 0,10 0,40 2,60 0,25 2,901 2,77613,95 1,60 1,10 1,10 0,80 0,10 0,40 2,60 0,25 2,901 2,77616,20 1,60 1,10 1,10 0,80 0,10 0,40 2,70 0,25 2,997 2,87118,45 1,60 1,10 1,10 0,80 0,10 0,40 2,70 0,25 2,997 2,87120,70 1,60 1,10 1,10 0,80 0,10 0,40 2,74 0,25 3,035 2,90923,00 1,60 1,10 1,10 0,80 0,10 0,40 2,74 0,25 3,035 2,90927,50 1,90 1,40 1,40 0,80 0,10 0,40 2,75 0,25 4,735 4,609
HL ØDB ØDI ØDS AP K J H HP Vh Ve
9,45 1,90 1,30 1,30 0,80 0,10 0,50 3,00 0,25 4,612 4,48611,70 1,90 1,30 1,30 0,80 0,10 0,50 3,00 0,25 4,612 4,48613,95 1,90 1,30 1,30 0,80 0,10 0,50 3,00 0,25 4,612 4,48616,20 1,90 1,30 1,30 0,80 0,10 0,50 3,10 0,25 4,745 4,61918,45 1,90 1,30 1,30 0,80 0,10 0,50 3,10 0,25 4,745 4,61920,70 1,90 1,30 1,30 0,80 0,10 0,50 3,15 0,25 4,811 4,68523,00 1,90 1,30 1,30 0,80 0,10 0,50 3,15 0,25 4,811 4,68527,50 2,20 1,60 1,60 0,80 0,10 0,50 3,20 0,25 7,163 7,037
HL ØDB ØDI ØDS AP K J H HP Vh Ve
9,45 2,00 1,40 1,40 0,80 0,10 0,50 3,35 0,25 5,820 5,69411,70 2,00 1,40 1,40 0,80 0,10 0,50 3,35 0,25 5,820 5,69413,95 2,00 1,40 1,40 0,80 0,10 0,50 3,35 0,25 5,820 5,69416,20 2,00 1,40 1,40 0,80 0,10 0,50 3,40 0,25 5,897 5,77118,45 2,00 1,40 1,40 0,80 0,10 0,50 3,40 0,25 5,897 5,77120,70 2,00 1,40 1,40 0,80 0,10 0,60 3,40 0,25 5,972 5,84623,00 2,00 1,40 1,40 0,80 0,10 0,60 3,40 0,25 5,972 5,84627,50 2,75 2,15 2,15 0,80 0,10 0,60 3,45 0,25 13,546 13,421
DENOMINATION DIMENSIONS (m) VOLUME (m³)
AZ9-E-C 2,9-F 4,0-A 4,3
AZ1-E-C 2,9-F 4,0-A 4,3
AZ2-E-C 2,9-F 4,0-A 4,3
AZ4-E-C 2,9-F 4,0-A 4,3
AZ5-E-C 2,9-F 4,0-A 4,3
AZABACHE Model
JIMÉNEZ
www.grupojbelinchon.com
Serie GEMAS
Overhead Ground and Simple Circuit options
7. ModelDIAMANTE
79 DIAMANTE Model
7.1. OBJECT
This document has been prepared for being a handbook for users of Lattice Metallic Towers, for electric lines until 220 kV.
AC
C C
C2 C2
C C
36
33
30
27
24
18
21
15
FRE
E H
EIG
HT
T1
T2
T3
T4
T5
T6
B15
B21
B27
B33
FF
A
HE
AD
TOWER GEOMETRY
80
7.2. ASSEMBLY DIMENSIONS
DIAMANTE Model
81
7.3. HEIGHTS AND WEIGHTS
The distances HL are calculated combining the sections of the basis, between the bottom crossarm and the land level.
Following, the distances are mentioned, the tower weight and base width B.
HL 15 18 21 24 27 30 33 36 B 3,88 4,35 4,83 5,30 5,78 6,25 6,73 7,20
DM1E C3,0/F3,3 A4,3 2864 3219 3664 4029 4394 4759 5124 5489DM2E C3,0/F3,3 A4,3 3009 3514 4004 4419 5049 5454 6339 6854DM4E C3,0/F3,3 A4,3 3409 3864 4404 4864 5584 6109 6959 8274DM5E C3,0/F3,3 A4,3 4469 5114 5734 6324 7389 7939 8864 9554DM6E C3,0/F3,3 A4,3 5429 6114 6899 7689 8779 9529 10579 11359DM9E C3,0/F3,3 A4,3 7099 7949 8939 9824 10759 11534 12834 13709
DM1E C4,1/F4,4 A5,9 3229 3584 4029 4394 4759 5124 5489 5854DM2E C4,1/F4,4 A5,9 3414 3819 4309 4724 5354 5759 6644 7159DM4E C4,1/F4,4 A5,9 3809 4264 4804 5264 5984 6509 7359 8674DM5E C4,1/F4,4 A5,9 4939 5579 6199 6789 7859 8409 9334 10024DM6E C4,1/F4,4 A5,9 5859 6544 7329 8119 9209 9959 11009 11789DM9E C4,1/F4,4 A5,9 7689 8544 9543 10419 11354 12129 13429 14304
DM1E C4,1/F5,5 A5,9 3394 3749 4194 4559 4924 5289 5654 6019DM2E C4,1/F5,5 A5,9 3574 3979 4469 4884 5514 5919 6804 7319DM4E C4,1/F5,5 A5,9 4034 4489 5029 5489 6209 6734 7584 8899DM5E C4,1/F5,5 A5,9 5204 5849 6464 7054 8124 8674 9599 10284DM6E C4,1/F5,5 A5,9 6184 6869 7654 8444 9534 10284 11334 12114DM9E C4,1/F5,5 A5,9 8044 8894 9884 10769 11704 12479 13779 14654
weight
DENOMINATIONHEIGHTS (m), WIDES (m) AND WEIGHTS (kg)
weight
weight
7.4. OVERALL FORCES
The total useful loads on the tower are included in the following table, where: EU Useful transversal resistant load of the tower, simultaneous with
the legal wind overload on the tower. EL Admissible longitudinal resistant load of the tower. ET Admissible longitudinal resistant load of torsion, applied on the
crossarm end. Et Admissible longitudinal resistant load of torsion, applied on the
end of the earth wire.
CS Safety factor of the tower for the required loads.
Coinciding with the previous ones, the loads will be considered due to: o Wind on the tower (1ªoad case – wind) o Own mass of the tower (every load case)
DIAMANTE Model
82
F V L V T V t vDM1E C3,0/F3,3 A4,3 3502 7238 3884 12064 3016 1810 2413 603DM2E C3,0/F3,3 A4,3 5334 6962 5914 11603 2901 1740 2321 580DM4E C3,0/F3,3 A4,3 7695 11246 8637 20125 2960 1776 3256 725DM5E C3,0/F3,3 A4,3 12188 10343 12954 18509 4900 2133 2994 667DM6E C3,0/F3,3 A4,3 19309 10790 19645 19309 5111 2225 3124 695DM9E C3,0/F3,3 A4,3 28996 10595 29554 18959 6134 2185 3067 683
DM1E C4,1/F4,4 A5,9 3073 6350 3407 10584 2646 1588 2117 529DM2E C4,1/F4,4 A5,9 4865 6350 5395 10584 2646 1588 2117 529DM4E C4,1/F4,4 A5,9 6669 9748 7486 17443 2565 1539 2822 628DM5E C4,1/F4,4 A5,9 11486 9748 12208 17443 4617 2010 2822 628DM6E C4,1/F4,4 A5,9 17110 9561 17408 17110 4529 1972 2768 616DM9E C4,1/F4,4 A5,9 25913 9468 26411 16943 5482 1953 2741 610
DM1E C4,1/F5,5 A5,9 2845 5880 3155 9800 2450 1470 1960 490DM2E C4,1/F5,5 A5,9 4505 5880 4995 9800 2450 1470 1960 490DM4E C4,1/F5,5 A5,9 6370 9310 7150 16660 2450 1470 2695 600DM5E C4,1/F5,5 A5,9 10970 9310 11660 16660 4410 1920 2695 600DM6E C4,1/F5,5 A5,9 16660 9310 16950 16660 4410 1920 2695 600DM9E C4,1/F5,5 A5,9 25480 9310 25970 16660 5390 1920 2695 600
CS=1,20 CS=1,20
Earth wire break
EtDENOMINATION Main force Secondary
forceConductor
breakEU EL ET
OVERALL FORCES (daN)
CS=1,50 CS=1,50
7.5. FORCES PER PHASE
The loads per phase are calculated from the total loads, in a way the earth wire load are 60% of the applied on crossarms, except in the case of breaking limits, mentioned in the following tables.
The useful loads per phase are included in the following tables, where:
o V-v: Admissible vertical load per conductor and earth wire. o H-h: Admissible horizontal transversal per conductor and earth wire o L-l: Admissible horizontal longitudinal per conductor and earth wire
DENOMINATION DENOMINATION
DM 1 E C 3,0/F 3,3 A 4,3 CS DM 1 E C 4,1/F 4,4 A 5,9 CS LOAD CASE v h l V H L LOAD CASE v h l V H L Wind 1,5 658 318 0 1097 531 0 Wind 1,5 577 279 0 962 466 0 Ice 1,5 1097 0 0 1828 0 0 Ice 1,5 962 0 0 1604 0 0 End line 1,5 1097 0 353 1828 0 588 End line 1,5 962 0 310 1604 0 516 Conductor break 1,2 1097 0 0 1810 0 3016 Conductor break 1,2 962 0 0 1588 0 2646 Earth wire break 1,2 603 0 2413 1828 0 0 Earth wire break 1,2 529 0 2117 1604 0 0
PHASE
Susp
ensi
on t
ower
Susp
ensi
on t
ower
FORCES PER PHASE (daN) CT
FORCES PER PHASE (daN) CT PHASE
DIAMANTE Model
83
DENOMINATION DENOMINATION DM 2 E C 3,0/F 3,3 A 4,3 CS DM 2 E C 4,1/F 4,4 A 5,9 CS LOAD CASE v h l V H L LOAD CASE v h l V H L Wind 1,5 633 485 0 1055 808 0 Wind 1,5 577 442 0 962 737 0 Ice 1,5 1055 0 0 1758 0 0 Ice 1,5 962 0 0 1604 0 0 End line 1,5 1055 0 538 1758 0 896 End line 1,5 962 0 490 1604 0 817 Conductor break 1,2 1055 0 0 1740 0 2901 Conductor break 1,2 962 0 0 1588 0 2646 Earth wire break 1,2 580 0 2321 1758 0 0 Earth wire break 1,2 529 0 2117 1604 0 0
DENOMINATION DENOMINATION DM 4 E C 3,0/F 3,3 A 4,3 CS DM 4 E C 4,1/F 4,4 A 5,9 CS LOAD CASE v h l V H L LOAD CASE v h l V H L Wind 1,5 1022 700 0 1704 1166 0 Wind 1,5 886 606 0 1477 1011 0 Ice 1,5 1830 0 0 3049 0 0 Ice 1,5 1586 0 0 2643 0 0 End line 1,5 1830 0 785 3049 0 1309 End line 1,5 1586 0 681 2643 0 1134 Conductor break 1,2 1830 0 0 1776 0 2960 Conductor break 1,2 1586 0 0 1539 0 2565 Earth wire break 1,2 725 0 3256 3049 0 0 Earth wire break 1,2 628 0 2822 2643 0 0
DENOMINATION DENOMINATION DM 5 E C 3,0/F 3,3 A 4,3 CS DM 5 E C 4,1/F 4,4 A 5,9 CS LOAD CASE v h l V H L LOAD CASE v h l V H L Wind 1,5 940 1108 0 1567 1847 0 Wind 1,5 886 1044 0 1477 1740 0 Ice 1,5 1683 0 0 2804 0 0 Ice 1,5 1586 0 0 2643 0 0 End line 1,5 1683 0 1178 2804 0 1963 End line 1,5 1586 0 1110 2643 0 1850 Conductor break 1,2 1683 0 0 2133 0 4900 Conductor break 1,2 1586 0 0 2010 0 4617 Earth wire break 1,2 667 0 2994 2804 0 0 Earth wire break 1,2 628 0 2822 2643 0 0
DENOMINATION DENOMINATION DM 6 E C 3,0/F 3,3 A 4,3 CS DM 6 E C 4,1/F 4,4 A 5,9 CS LOAD CASE v h l V H L LOAD CASE v h l V H L Wind 1,5 981 1755 0 1635 2926 0 Wind 1,5 869 1555 0 1449 2592 0 Ice 1,5 1755 0 0 2926 0 0 Ice 1,5 1555 0 0 2592 0 0 End line 1,5 1755 0 1786 2926 0 2977 End line 1,5 1555 0 1583 2592 0 2638 Conductor break 1,2 1755 0 0 2225 0 5111 Conductor break 1,2 1555 0 0 1972 0 4529 Earth wire break 1,2 695 0 3124 2926 0 0 Earth wire break 1,2 616 0 2768 2592 0 0
DENOMINATION DENOMINATION DM 9 E C 3,0/F 3,3 A 4,3 CS DM 9 E C 4,1/F 4,4 A 5,9 CS LOAD CASE v h l V H L LOAD CASE v h l V H L Wind 1,5 963 2636 0 1605 4393 0 Wind 1,5 861 2356 0 1435 3926 0 Ice 1,5 1724 0 0 2873 0 0 Ice 1,5 1540 0 0 2567 0 0 End line 1,5 1724 0 2687 2873 0 4478 End line 1,5 1540 0 2401 2567 0 4002 Conductor break 1,2 1724 0 0 2185 0 6134 Conductor break 1,2 1540 0 0 1953 0 5482 Earth wire break 1,2 683 0 3067 2873 0 0 Earth wire break 1,2 610 0 2741 2567 0 0
DENOMINATION DENOMINATION DM 1 E C 4,1/F 5,5 A 5,9 CS DM 5 E C 4,1/F 5,5 A 5,9 CS LOAD CASE v h l V H L LOAD CASE V h l V H L Wind 1,5 535 259 0 891 431 0 Wind 1,5 846 997 0 1411 1662 0 Ice 1,5 891 0 0 1485 0 0 Ice 1,5 1515 0 0 2524 0 0 End line 1,5 891 0 287 1485 0 478 End line 1,5 1515 0 1060 2524 0 1767 Conductor break 1,2 891 0 0 1470 0 2450 Conductor break 1,2 1515 0 0 1920 0 4410 Earth wire break 1,2 490 0 1960 1485 0 0 Earth wire break 1,2 600 0 2695 2524 0 0
Susp
ensi
on to
wer
and
ext
ra
safe
ty
CT PHASE
CT
CT PHASE
PHASE
CT PHASE
CT PHASE
FORCES PER PHASE (daN)
CT PHASE
FORCES PER PHASE (daN) CT PHASE
FORCES PER PHASE (daN)
FORCES PER PHASE (daN) CT PHASE
CT PHASE
CT PHASE FORCES PER PHASE (daN)
FORCES PER PHASE (daN)
Tens
ion
tow
er a
nd m
ediu
m
angl
esTe
nsio
n to
wer
and
stro
ng
angl
esEn
d lin
e
CT PHASE
CT PHASE
FORCES PER PHASE (daN)
FORCES PER PHASE (daN)
FORCES PER PHASE (daN)Te
nsio
n to
wer
and
med
ium
an
gles
Susp
ensi
on to
wer
FORCES PER PHASE (daN)
FORCES PER PHASE (daN)
FORCES PER PHASE (daN)
End
line
Susp
ensi
on to
wer
and
ext
ra
safe
tyTe
nsio
n to
wer
and
smal
l an
gles
Tens
ion
tow
er a
nd sm
all
angl
esTe
nsio
n to
wer
and
med
ium
an
gles
Tens
ion
tow
er a
nd st
rong
an
gles
DIAMANTE Model
84
DENOMINATION DENOMINATION DM 2 E C 4,1/F 5,5 A 5,9 CS DM 6 E C 4,1/ F5,5 A 5,9 CS LOAD CASE v h l V H L LOAD CASE v h l V H L Wind 1,5 535 410 0 891 683 0 Wind 1,5 846 1515 0 1411 2524 0 Ice 1,5 891 0 0 1485 0 0 Ice 1,5 1515 0 0 2524 0 0 End line 1,5 891 0 454 1485 0 757 End line 1,5 1515 0 1541 2524 0 2568 Conductor break 1,2 891 0 0 1470 0 2450 Conductor break 1,2 1515 0 0 1920 0 4410 Earth wire break 1,2 490 0 1960 1485 0 0 Earth wire break 1,2 600 0 2695 2524 0 0
DENOMINATION DENOMINATION DM 4 E C 4,1/F 5,5 A 5,9 CS DM 9 E C 4,1/F 5,5 A 5,9 CS LOAD CASE v h l V H L LOAD CASE v h l V H L Wind 1,5 846 579 0 1411 965 0 Wind 1,5 846 2316 0 1411 3861 0 Ice 1,5 1515 0 0 2524 0 0 Ice 1,5 1515 0 0 2524 0 0 End line 1,5 1515 0 650 2524 0 1083 End line 1,5 1515 0 2361 2524 0 3935 Conductor break 1,2 1515 0 0 1470 0 2450 Conductor break 1,2 1515 0 0 1920 0 5390 Earth wire break 1,2 600 0 2695 2524 0 0 Earth wire break 1,2 600 0 2695 2524 0 0
CT PHASE
CT PHASE
CT PHASE FORCES PER PHASE (daN)
FORCES PER PHASE (daN)
FORCES PER PHASE (daN)
CT PHASE FORCES PER PHASE (daN)
Susp
ensi
on to
wer
and
ext
ra
safe
tyTe
nsio
n to
wer
and
smal
l an
gles
Tens
ion
tow
er a
nd st
rong
an
gles
End
line
Coinciding with the previous ones, the loads will be considered due to:
o Wind on the tower (1ª Hypothesis – wind) o Own mass of the tower (every hypothesis)
7.6. FOUNDATIONS
The foundations in these towers have separated legs and circular sections
The loads for every anchoring and for every HL height are mentioned in kilos in the following table.
HL (m) 15 18 21 24 27 30 33 36 Uplift 13274 14110 14903 15660 16374 17091 17755 18437 Compression 20514 21745 22863 23879 24966 25952 27052 28060 Uplift 20259 21318 22281 23165 23991 24801 25543 26301 Compression 27485 28783 30083 31261 32483 33587 34787 35894 Uplift 27550 28893 30090 31191 32209 33196 34093 34999 Compression 41076 42377 43352 44188 44963 45752 47141 48408 Uplift 45003 46945 48579 50059 51387 52638 53755 54854 Compression 56781 58646 60042 61575 63365 64977 66619 68110 Uplift 71506 74374 76660 78715 80544 82235 83728 85113 Compression 82407 85969 88717 91163 93498 95593 97653 99554 Uplift 107918 111934 115076 117837 120257 122443 124345 126143 Compression 119770 124343 128085 131368 134434 137202 139834 142229
DENOMINATION OVERALL LOAD FOUNDATIONS (kg)
DM1E C3,0/F3,3 A4,3
DM2E C3,0/F3,3 A4,3
DM4E C3,0/F3,3 A4,3
DM5E C3,0/F3,3 A4,3
DM6E C3,0/F3,3 A4,3
DM9E C3,0/F3,3 A4,3
DIAMANTE Model
85
HL (m) 15 18 21 24 27 30 33 36 Uplift 13596 14281 14951 15609 16240 16886 17490 18119 Compression 20421 21500 22497 23412 24416 25332 26371 27326 Uplift 20808 21657 22453 23200 23911 24625 25283 25969 Compression 27669 28918 30051 31091 32199 33206 34323 35358 Uplift 26814 27826 28763 29650 30489 31322 32089 32882 Compression 37870 38812 39505 40580 41850 43013 44272 45425 Uplift 46387 47890 49182 50376 51468 52517 53463 54411 Compression 57010 58534 60239 61780 63335 64746 66215 67556 Uplift 69085 71166 72847 74390 75796 77124 78311 79427 Compression 79357 82133 84275 86209 88120 89853 91607 93239 Uplift 104549 107390 109640 111651 113449 115102 116555 117954 Compression 115651 119357 122206 124738 127183 129417 131600 133596 Uplift 14173 14752 15337 15924 16497 17093 17655 18248 Compression 20733 21706 22617 23462 24408 25274 26270 27189 Uplift 21238 21925 22592 23233 23856 24494 25088 25718 Compression 27851 28938 29941 30875 31894 32826 33879 34857 Uplift 27959 28764 29537 30290 31016 31754 32439 33160 Compression 37973 38767 39898 40988 42146 43213 44390 45472 Uplift 47793 48946 49963 50929 51831 52720 53528 54356 Compression 57658 59377 60808 62121 63486 64736 66068 67289 Uplift 72046 73633 74926 76142 77278 78376 79368 80313 Compression 82239 84520 86275 87881 89523 91025 92584 94045 Uplift 109766 111868 113549 115080 116486 117801 118969 120115 Compression 120955 123922 126203 128255 130307 132203 134102 135845
DENOMINATION OVERALL LOADS FOUNDATIONS (kg)
DM6E C4,1/F4,4 A5,9
DM9E C4,1/F4,4 A5,9
DM1E C4,1/F4,4 A5,9
DM2E C4,1/F4,4 A5,9
DM4E C4,1/F4,4 A5,9
DM5E C4,1/F4,4 A5,9
DM1E C4,1/F5,5 A5,9
DM9E C4,1/F5,5 A5,9
DM2E C4,1/F5,5 A5,9
DM4E C4,1/F5,5 A5,9
DM5E C4,1/F5,5 A5,9
DM6E C4,1/F5,5 A5,9
DIAMANTE Model
86
The sizes of the foundations in these towers are the mentioned in the following table for every model:
VOL. (m³)
Inferior diameter
(m)
Top diameter
(m)
Depth(m)
Height truncated cone (m)
Concrete volume
(m³)DM1E 1,25 0,80 2,05 0,45 1,180DM2E 1,40 0,85 2,35 0,50 1,560DM4E 1,60 0,95 2,50 0,50 2,070DM5E 1,90 1,15 2,85 0,60 3,460DM6E 2,30 1,40 3,20 0,65 5,710DM9E 2,75 1,65 3,55 0,70 8,810
DIMENSIONS
DENOMINATION
DIAMANTE Model
JIMÉNEZ
www.grupojbelinchon.com
Serie GEMAS
8. ModelTURQUESA
Overhead Ground Option
89 TURQUESA Model
8.1. OBJECT This document has been carried for being a handbook for users of Lattice Metallic Towers, for electric lines up 220 kV.
T1
T2
HE
AD
BO
DY
C
C
C2
FF
A
B
AC
FRE
E H
EIG
HT
15.00
20.00
25.00
30.00
C
C
C2
FF
A
AC
TOWER GEOMETRY
90
8.2. ASSEMBLY DIMENSION
F
C C
F
CC
C2C2
A
AC
AC C C2 F ATQ9-E-C 5,6-F 5,5-A 7,7 2,00 5,60 6,10 5,50 7,65TQ9-E-C 4,7-F 5,5-A 6,5 2,00 4,70 5,60 5,50 6,50
DENOMINATIONDIMENSIONS (m)
8.3. HEIGHTS AND WEIGHTS The distances HL are got combining the sections of the basis, between the bottom crossarm and the land level.
Following, the distances are mentioned, the tower weight and base B width.
DENOMINATION
HEIGHT HL 15 20 25 30WIDTH B 5,00 6,00 7,00 8,00
TQ9-E-C 5,6-F 5,5-A 7,7 10471 12245 14087 16023TQ9-E-C 4,7-F 5,5-A 6,5 10057 11840 13691 15636
HEIGHT (m), WIDTH (m) WEIGHT (kg)
weight
TURQUESA Model
91
8.4. OVERALL FORCES
The total useful loads on the tower are included in the following table, where:
EU Useful transversal resistant load of the tower, simultaneous
with the legal wind overload on the tower. EL Admissible longitudinal resistant load of the tower. ET Admissible longitudinal resistant load of torsion, applied on
the crossarm end. Et Admissible longitudinal resistant load of torsion, applied on
the end of the earth wire. EF Horizontal load, caused by tower failure CS Safety factor of the tower for the required loads.
The loads will be considered applied to the height of central crossarm. Coinciding with the previous ones, the loads will be considered due to:
o Wind on the tower (1ª load case – wind) o Own mass of the tower (every load case)
Failure force
EFCS=1,00
F V L V T V t vTQ9-E-C 5,6-F 5,5-A 7,7 39300 10300 40100 19000 6000 2000 3750 700 56374TQ9-E-C 4,7-F 5,5-A 6,5 39300 10300 40100 19000 6400 2000 3750 700 56836
CS=1,50 CS=1,50 CS=1,20 CS=1,20
DENOMINATION
OVERALL FORCES (daN)
Main force Secondary force
Conductor break
Earth wire break
EU EL ET Et
TURQUESA Model
92
8.5. FORCES PER PHASE
The useful loads per phase are included in the following tables, where:
o V-v: Admissible vertical load per conductor and earth wire. o H-h: Admissible horizontal transversal per conductor and earth wire o L-l: Admissible horizontal longitudinal per conductor and earth wire
DENOMINATION
TQ9-E-C 5,6-F 5,5-A 7,7
LOAD CASES CS v h l V H LWind 1,5 400 2939 0 1650 5879 0Ice 1,5 1000 2999 0 3000 5998 0End of line 1,5 1500 0 3000 3000 0 6000Unbalanced 1,2 1875 0 3750 3750 0 7500Conductor break 1,2 1000 3000 0 2000 3000 6000Earth wire break 1,2 700 1500 3750 3000 6000 0
DENOMINATION
TQ9-E-C 4,7-F 5,5-A 6,5
LOAD CASES CS v h l V H LWind 1,5 400 2939 0 1650 5879 0Ice 1,5 1000 2999 0 3000 5998 0End of line 1,5 1500 0 3000 3000 0 6000Unbalanced 1,2 1875 0 3750 3750 0 7500Conductor break 1,2 1000 3000 0 2000 3000 6400Earth wire break 1,2 700 1500 3750 3000 6000 0
CT PHASE
End
of li
neEn
d of
line
FORCES PER PHASE (daN)
CT PHASE
FORCES PER PHASE (daN)
Coinciding with the previous ones, the loads will be considered due to:
o Wind on the tower (1ª Load case– wind) o Own mass of the tower (every load case)
8.6. FOUNDATIONS
The foundations in these towers have separated legs and circular sections
The loads for every anchoring and for every HL height are mentioned in kilos in the following table.
HL (m) 15 20 25 30Uplift 123616 127206 129832 131849Compression 138696 142731 145981 149346Uplift 123071 126753 129444 131510Compression 138049 142172 145361 148775
DENOMINATION
TQ9-E-C 5,6-F 5,5-A 7,7
TQ9-E-C 4,7-F 5,5-A 6,5
FOUNDATION FORCES (kg)
TURQUESA Model
93 Model TURQUESA
The sizes (meters) of the foundations in these towers are the mentioned in the following table for every HL height, where: ∅DB: Width of the foundation bottom ∅Di: Bottom width of the foundation ∅DS: Top width of the foundation H: Total foundation height AP: Plint of the width K: Cellar height J: Height of the conical area H: Total height of the foundation HP: Plint height Vh: Concrete volume per leg Ve: Digging volume per leg
HEIGHT (m)
HL ØDB ØDI ØDS AP K J H HP Vh Ve15,00 2,60 1,50 1,50 0,80 0,10 1,00 3,65 0,25 8,543 8,41720,00 2,65 1,55 1,55 0,80 0,10 1,00 3,70 0,25 9,126 9,00025,00 2,70 1,50 1,50 0,80 0,10 1,10 3,70 0,25 9,030 8,90430,00 2,70 1,50 1,50 0,80 0,10 1,10 3,75 0,25 9,118 8,992
FH ØDB ØDI ØDS AP K J H HP Vh Ve15,00 2,60 1,50 1,50 0,80 0,10 1,00 3,65 0,25 8,543 8,41720,00 2,65 1,55 1,55 0,80 0,10 1,00 3,70 0,25 9,126 9,00025,00 2,70 1,50 1,50 0,80 0,10 1,10 3,70 0,25 9,030 8,90430,00 2,70 1,50 1,50 0,80 0,10 1,10 3,75 0,25 9,118 8,992
TQ9-E-C 4,7-F 5,5-A 6,5
DENOMINATION DIMENSIONS (m) VOLUMES (m³)
TQ9-E-C 5,6-F 5,5-A 7,7
K
H
J
AP
HP
0.05
ØDB
ØDI
ØDS
JIMÉNEZ
www.grupojbelinchon.com
Serie GEMAS
Useful information
9. Annex I
97 ANNEX I
9.1. INTRODUCTION
The data of every model have been standardized, for facilitatvy the search of any of them in any moment.
The towers mentioned in this “GEMAS” catalogue are valid for any situation, in the different types of line.
The foundations of the towers in the soil are made from mass concrete, in monoblock or in four separated ones.
The calculation and dimensioning of the different towers have been carried out by a computer calculation program, based on the theory of the Finite Elements Method (ANSYS), taking in account the structures of articulated knots, with elastic behavior and with limited movement in the foundations knots.
Every model, in every height and for every assembly has been calculated by the Finite Elements Method, testing,the stability in every structure bar, and the strength in every screwed union.
We hope the following data will be useful for you .
98
9.2. MATERIALS The materials used in the tower construction, and the considered for the calculation are the following:
o Angle profiles: steel, S 275 JR ó S 355 JO quality, corresponding to UNE-EN 10025:1994 standard: “Hot rolled products, not alloyed steel for metallic construction for general use. Technical conditions of supply”. About the sizes and tolerance of the profiles, are under UNE-EN 10056-1:1999 standard for “Equal and unequal side angles from structural steel: First part. Sizes” and UNE-EN 10056-2:1999 for ““Equal and unequal side angles from structural steel. Second part: Dimensional and shape tolerances ”.
o Bolts: 5.6 quality, according UNE-EN ISO 898-1:2000 standard, for “Mechanical caracteristics of the fixing elements, made from carbonic steel and alloyed steel. First part: Bolts and screws”, and sizes according UNE 17052:1978 standard “Distance between sides, head height and nut height” galvanized according UNE-EN ISO 1461:1999 standard for “Hot dip galvanized coatings on finished iron and steel products. Specifications and test methods ”.
o Washers: Bolts have flat washers, according DIN 7989 “Washers for steel construction”.
o Nuts: Sizes according UNE-EN ISO 4032:2001 and UNE-EN ISO 4034:2001.
9.3. COATINGS Galvanizing is made from zinc, according UNE-EN 1179:1996 standard “Zinc and alloy zinc. Primary zinc” and their finishing is according UNE 37508:1988 standard “Hot dip galvanized coatings for different pieces and articles” in the sheets and profiles according UNE 37507-88 “Hot dip galvanized coatings for bolts and fixing elements”.
9.4. DESIGN METHOD General dimensions have been adjusted to the specifications of the Spanish electric companies. Loads for 120 km/h wind speed have been considered.
ANNEX I
99
9.5. FOUNDATION SIZING MONOBLOC FOUNDATION
Sulzberger method is used for its dimensioning. Normally, the bulk is a prism, with square base, and its stability is mainly based on the horizontal reactions of the soil, and turn angles with a tangentbigger than 0,01 are not allowed in the foundation , with the objetive of getting the balance in the turn overmoment, taking in mind the reactions of the soil.
The maximum dumping moment produced by outdoor agents, has to be resisted by the stabilizing moment in the soil movements and the own weight, with 1,5 safety factors, for the normal load cases, and 1,2 for unusual ones.
(S3)3 P
OTx
Suelo
F
(S1)
1
Ct
(S2)2
t/3
2t/3
Tl
b
a
hy
t
ANNEX I
100
Ø D B K
Ø D I
J
H
0.05
Ø D S
HP
A PIn the catalogue are mentioned the foundation sizes andvolume, keeping in mind the assembly and freeheight, corresponding a medium solidity soil, with thefollowing parameters:
• 30º pulling up angle • 2,5 kg/cm² maximum pressure on the soil • 1750 kg/m³ soil density • 2200 Kg/m³ concrete density.
The dumping moment is expressed by:
+= thFMv
32
and,
F = horizontal load, only in the end. h = total height of the tower t = foundation depth.
The resistant moment is expressed by:
( ) PAmhkhAMr ⋅⋅+⋅⋅
⋅= 4.0
236
3
and,
A = foundation width. k = Subgrade reaction modulus of the soil, with 2 meters width, in kg/m³. P = concrete bulk weight.
In the catalogue are mentioned the foundations sizes and volumes, calculated according the above mentioned for every tower, keeping in mind the structure and free height, at 10 kg/cm3 subgrade reaction modulus, corresponding to a medium solidity soil.
In the foundation dimensioning, have been kept in mind the carrying out conditions in the digging of the bulks, concrete and the tower hauling up.
FOUNDATION FOR SEPARATED LEGS
This type of foundation has been carried out with four concrete blocks, one independent for every leg. Its dimensioning is carried out by the land pulling up theory, with safety factors in the pullingup of 1,5 in normal hypothesis and 1,2 in unusual ones, keeping the pressure on the soil in the limits allowed by its characteristics.
.
ANNEX I
101 ANEXO I
9.6. CONDUCTORS TABLE
Total Wire Electrical WEIGHT Final Coefic. Of RATEDdiameter (mm) (Nº) resistance (p) modulus of linear STRENGTH
Total Diameter 20 ºC elasticity (E) expansion (x)Section (mm²) (mm) (W/km) (kg/mm²) 10-6 (ºC) (kg)
7,14 6+131,1 2,389,45 6+154,6 3,1511,34 6+178,6 3,7814,00 30+7116,2 2,0015,75 30+7147,1 2,2517,50 30+7181,6 2,5021,80 26+7281,1 3,44/2,6825,38 54+7381,0 2,8227,72 54+7454,5 3,0830,42 54+7547,3 3,3832,85 54+19636,6 3,65/2,19
9,78 758,6 3,2611,00 773,9 3,67
9,00 749,5 3,0010,50 767,3 3,50
12,0 8550AC70 - 0,570 20000
ALUMINIUM-REINFORCED STEEL CABLES
STEEL CABLES USED IN EARTH LINESAC50 - 0,420 20000 12,0 6250
16170 13,0 7224
1,160 0,491 16170 13,0 8642
Nº 7-8
Nº 7-7
1,463 0,390
12662
15152
17868
DENOMINATION(kg/m)
5518
6517
8613
10869
1007
1666
2359
4398
19,3
17,8
17,8
18,9
19,3
19,3
19,4
7000
7000
6800
19,1
19,1
19,1
17,8
8200
8200
7700
7000
8100
8100
8100
8200
1,275
1,521
1,832
2,125
0,433
0,548
0,676
0,977
0,086
0,072
0,060
0,051
0,307
0,242
0,196
0,119
LA-380 GULL
LA-455 CONDOR
LA-545 CARDINAL
LA-635 FINCH
LA-110
LA-145
LA-180
LA-280 HAWK
ALUMINIUM-STEEL CONDUCTORS (UNE 21018)
LA-30
LA-56
LA-78
1,075
0,614
0,426
0,108
0,189
0,272
102
9.7. FORCES OVER CONDUCTORS
WIND WEIGHTLOAD AND WIND
RESULTANT AREA B AREA CV (kg/m) (kg/m) (kg/m) (kg/m)
LA-30 0,428 0,442 75º 51' 0,481 0,962
LA-56 0,567 0,598 71º 34' 0,553 1,107
LA-78 0,680 0,629 68º 13' 0,606 1,212
LA-110 0,840 0,945 62º 44' 0,673 1,347
LA-145 0,945 0,874 59º 53' 0,714 1,429
LA-180 0,875 1,106 52º 19' 0,753 1,506
LA-280 HAWK 1,090 1,288 48º 8' 0,840 1,681
LA-380 GULL 1,269 1,799 44º 52' 0,907 1,814
LA-455 CONDOR 1,386 1,791 42º 20' 0,948 1,895
LA-545 CARDINAL 1,521 2,381 39º 42' 0,993 1,986
LA-635 FINCH 1,643 2,298 37º 42' 1,032 2,063
Nº 7-8 0,587 0,705 56º 23' 0,563 1,126
Nº 7-7 0,660 0,823 53º 21' 0,597 1,194
AC50 0,540 0,684 0,540 1,080
AC70 0,630 0,850 0,583 1,167-
ICE LOAD
DENOMINATION
ANGLE OFDEFLECTIONARCTAN(v/p)
(º)
ALUMINIUM-STEEL CONDUCTORS ACTIONS (UNE 21018)
ALUMINIUM-REINFORCED STEEL CABLES ACTIONS
STEEL CABLES USED IN EARTH LINES ACTIONS
-
ANNEX I
103
9.8. ANGLES WITH EQUAL SIDES
a e r r1 IX=IY IZ IT WX WT iX iZ iT d Z1 V1 V2L40 x 3 40 3 6 3 2,35 1,84 3,45 5,45 1,44 1,18 0,95 1,21 1,52 0,78 1,07 2,83 1,52 1,40L40 x 4 40 4 6 4 3,05 2,39 4,35 6,89 1,80 1,50 1,15 1,19 1,50 0,77 1,11 2,83 1,57 1,38L40 x 5 40 5 6 4 3,76 2,95 5,31 8,41 2,20 1,86 1,35 1,19 1,50 0,77 1,15 2,83 1,63 1,38L45 x 4 45 4 7 3,5 3,49 2,74 6,43 10,18 2,68 1,97 1,53 1,36 1,71 0,88 1,23 3,18 1,75 1,57L45 x 5 45 5 7 3,5 4,30 3,38 7,84 12,42 3,26 2,43 1,80 1,35 1,70 0,87 1,28 3,18 1,81 1,58L45 x 6 45 6 7 3,5 5,09 4,00 9,16 14,50 3,83 2,88 2,05 1,34 1,69 0,87 1,32 3,18 1,87 1,59L50 x 4 50 4 7 3,5 3,89 3,06 8,97 14,22 3,73 2,46 1,94 1,52 1,91 0,98 1,36 3,54 1,92 1,75L50 x 5 50 5 7 3,5 4,80 3,77 10,96 17,38 4,55 3,05 2,29 1,51 1,90 0,97 1,40 3,54 1,99 1,76L50 x 6 50 6 7 3,5 5,69 4,47 12,84 20,34 5,34 3,61 2,61 1,50 1,89 0,97 1,45 3,54 2,04 1,77L50 x 7 50 7 7 3,5 6,56 5,15 14,61 23,11 6,11 4,16 2,91 1,49 1,88 0,97 1,49 3,54 2,10 1,78L50 x 8 50 8 7 3,5 7,41 5,82 16,28 25,69 6,87 4,68 3,19 1,48 1,86 0,96 1,52 3,54 2,16 1,80L60 x 4 60 4 8 4 4,71 3,70 15,78 24,97 6,58 3,58 2,91 1,83 2,30 1,18 1,60 4,24 2,26 2,10L60 x 5 60 5 8 4 5,82 4,57 19,37 30,71 8,03 4,45 3,46 1,82 2,30 1,17 1,64 4,24 2,32 2,11L60 x 6 60 6 8 4 6,91 5,42 22,79 36,14 9,44 5,29 3,96 1,82 2,29 1,17 1,69 4,24 2,39 2,11L60 x 8 60 8 8 4 9,03 7,09 29,15 46,15 12,16 6,89 4,86 1,80 2,26 1,16 1,77 4,24 2,50 2,14L60 x 10 60 10 8 4 11,1 8,69 34,93 55,06 14,80 8,41 5,67 1,78 2,23 1,16 1,85 4,24 2,61 2,17L70 x 5 70 5 9 4,5 6,84 5,37 31,24 49,50 12,97 6,10 4,87 2,14 2,69 1,38 1,88 4,95 2,66 2,46L70 x 6 70 6 9 4,5 8,13 6,38 36,88 58,50 15,27 7,27 5,60 2,13 2,68 1,37 1,93 4,95 2,73 2,46L70 x 7 70 7 9 4,5 9,40 7,38 42,30 67,09 17,50 8,41 6,28 2,12 2,67 1,36 1,97 4,95 2,79 2,47L70 x 8 70 8 9 4,5 10,7 8,36 47,49 75,28 19,69 9,52 6,92 2,11 2,66 1,36 2,01 4,95 2,85 2,48L70 x 10 70 10 9 4,5 13,1 10,3 57,24 90,53 23,96 11,66 8,10 2,09 2,63 1,35 2,09 4,95 2,96 2,51L80 x 6 80 6 10 5 9,35 7,34 55,82 88,52 23,13 9,57 7,55 2,44 3,08 1,57 2,17 5,66 3,07 2,81L80 x 7 80 7 10 5 10,8 8,49 64,19 101,8 26,54 11,09 8,48 2,44 3,07 1,57 2,21 5,66 3,13 2,82L80 x 8 80 8 10 5 12,3 9,63 72,25 114,6 29,88 12,58 9,37 2,43 3,06 1,56 2,26 5,66 3,19 2,83L80 x 10 80 10 10 5 15,1 11,9 87,50 138,6 36,38 15,45 11,01 2,41 3,03 1,55 2,34 5,66 3,30 2,85L80 x 12 80 12 10 5 17,9 14,0 101,7 160,7 42,70 18,20 12,51 2,39 3,00 1,55 2,41 5,66 3,41 2,89L90 x 6 90 6 11 5,5 10,6 8,30 80,31 127,3 33,34 12,18 9,80 2,76 3,47 1,78 2,41 6,36 3,40 3,16L90 x 7 90 7 11 5,5 12,2 9,61 92,55 146,8 38,29 14,13 11,04 2,75 3,46 1,77 2,45 6,36 3,47 3,16L90 x 8 90 8 11 5,5 13,9 10,9 104,4 165,6 43,13 16,05 12,22 2,74 3,45 1,76 2,50 6,36 3,53 3,17L90 x 9 90 9 11 5,5 15,5 12,2 115,8 183,8 47,88 17,93 13,34 2,73 3,44 1,76 2,54 6,36 3,59 3,18L90 x 10 90 10 11 5,5 17,1 13,5 126,9 201,3 52,55 19,77 14,40 2,72 3,43 1,75 2,58 6,36 3,65 3,19L90 x 12 90 12 11 5,5 20,3 15,9 148,0 234,4 61,70 23,34 16,41 2,70 3,40 1,74 2,66 6,36 3,76 3,22L90 x 15 90 15 11 5,5 24,9 19,5 177,3 279,4 75,11 28,47 19,16 2,67 3,35 1,74 2,77 6,36 3,92 3,28
Designation of profile
Measurements mm
Moment of inertia cm4
Resistance module cm³
Radius of rotation cm
Position of center of gravity cmA
cm²M
kg/m
Z2
TZ
d
Yd
T
V1
X
V2
G
Z1
YZ
X
SYMBOLaerr1
AM
IX,IY
IZ, IT
iX
iZ, iT
Radius of rotation around geometrics axesRadius of rotation around main axes
Moments of inertia around main axes
DESIGNATION
AreaWeight per meterMoments of inertia around geometrics axes
Length of sidesThickness of sidesRadius proportional to sidesRadius of rounded edges
ANNEX I
104
a e r r1 IX=IY IZ IT WX WT iX iZ iT d Z1 V1 V2L100 x 8 100 8 12 6 15,5 12,2 144,8 229,8 59,86 19,94 15,47 3,06 3,85 1,96 2,74 7,07 3,87 3,52L100 x 10 100 10 12 6 19,2 15,0 176,7 280,4 73,01 24,62 18,29 3,04 3,83 1,95 2,82 7,07 3,99 3,54L100 x 12 100 12 12 6 22,7 17,8 206,7 327,6 85,75 29,12 20,89 3,02 3,80 1,94 2,90 7,07 4,11 3,57L100 x 15 100 15 12 6 27,9 21,9 248,6 392,8 104,4 35,61 24,44 2,98 3,75 1,93 3,02 7,07 4,27 3,61L120 x 10 120 10 13 6,5 23,2 18,2 312,9 497,0 128,9 36,03 27,51 3,67 4,63 2,36 3,31 8,49 4,69 4,24L120 x 12 120 12 13 6,5 27,5 21,6 367,7 583,7 151,6 42,73 31,56 3,65 4,60 2,35 3,40 8,49 4,80 4,26L120 x 15 120 15 13 6,5 33,9 26,6 444,9 705,1 184,7 52,43 37,15 3,62 4,56 2,33 3,51 8,49 4,97 4,31L150 x 12 150 12 16 8 34,8 27,4 736,9 1170 303,5 67,75 52,05 4,60 5,80 2,95 4,12 10,6 5,83 5,29L150 x 15 150 15 16 8 43,0 33,8 898,1 1426 370,2 83,52 61,64 4,57 5,76 2,93 4,25 10,6 6,01 5,33L150 x 18 150 18 16 8 51,0 40,1 1050 1665 435,0 98,74 70,45 4,54 5,71 2,92 4,37 10,6 6,17 5,37L180 x 15 180 15 18 9 52,1 40,9 1589 2524 653,0 122,0 92,68 5,52 6,96 3,54 4,98 12,7 7,05 6,37L180 x 18 180 18 18 9 61,9 48,6 1866 2963 768,3 144,7 106,4 5,49 6,92 3,52 5,10 12,7 7,22 6,41L180 x 20 180 20 18 9 68,4 53,7 2043 3242 843,5 159,4 115,1 5,47 6,89 3,51 5,18 12,7 7,33 6,44L200 x 16 200 16 18 9 61,8 48,5 2341 3723 960,0 161,7 122,9 6,16 7,76 3,94 5,52 14,1 7,81 7,09L200 x 18 200 18 18 9 69,1 54,3 2600 4133 1067 180,6 134,6 6,13 7,73 3,93 5,60 14,1 7,93 7,12L200 x 20 200 20 18 9 76,4 59,9 2851 4529 1172 199,1 145,8 6,11 7,70 3,92 5,68 14,1 8,04 7,15L200 x 24 200 24 18 9 90,6 71,1 3331 5284 1378 235,2 166,9 6,06 7,64 3,90 5,84 14,1 8,26 7,21
Designation of profile
Measurements mm A
cm²M
kg/m
Position of center of gravity cm
Moment of inertia cm4
Resistance module cm³
Radius of rotation cm
a e r r1 IX=IY IZ IT WX WT iX iZ iT d Z1 V1 V2
LI19 x 3 19 3,2 3,2 1,6 1,12 0,88 0,35 0,55 0,15 0,27 0,18 0,56 0,70 0,36 0,58 1,35 0,82 0,68LI19 x 5 19 4,8 3,2 1,6 1,60 1,25 0,48 0,74 0,22 0,38 0,24 0,55 0,68 0,37 0,64 1,35 0,91 0,71LI22 x 3 22 3,2 3,2 1,6 1,32 1,04 0,58 0,92 0,24 0,37 0,26 0,66 0,83 0,43 0,66 1,57 0,94 0,79LI22 x 5 22 4,8 3,2 1,6 1,90 1,49 0,80 1,24 0,35 0,53 0,34 0,65 0,81 0,43 0,72 1,57 1,02 0,82LI25 x 3 25 3,2 3,2 1,6 1,52 1,20 0,89 1,41 0,37 0,49 0,35 0,76 0,96 0,49 0,74 1,80 1,05 0,91LI25 x 5 25 4,8 3,2 1,6 2,20 1,73 1,23 1,93 0,53 0,71 0,47 0,75 0,94 0,49 0,80 1,80 1,13 0,93LI25 x 6 25 6,4 3,2 1,6 2,83 2,22 1,52 2,35 0,69 0,90 0,57 0,73 0,91 0,49 0,86 1,80 1,21 0,97LI32 x 3 32 3,2 4,8 2,4 1,94 1,52 1,78 2,81 0,74 0,78 0,59 0,96 1,20 0,62 0,89 2,25 1,26 1,11LI32 x 5 32 4,8 4,8 2,4 2,82 2,22 2,51 3,96 1,05 1,13 0,78 0,94 1,18 0,61 0,95 2,25 1,35 1,13LI32 x 6 32 6,4 4,8 2,4 3,65 2,87 3,14 4,92 1,36 1,45 0,95 0,93 1,16 0,61 1,01 2,25 1,43 1,16LI38 x 3 38 3,2 4,8 2,4 2,34 1,84 3,16 5,01 1,31 1,14 0,88 1,16 1,46 0,75 1,05 2,69 1,48 1,34LI38 x 5 38 4,8 4,8 2,4 3,43 2,69 4,50 7,13 1,87 1,67 1,19 1,15 1,44 0,74 1,11 2,69 1,57 1,36LI38 x 6 38 6,4 4,8 2,4 4,46 3,50 5,69 8,97 2,41 2,16 1,45 1,13 1,42 0,74 1,17 2,69 1,66 1,39LI38 x 8 38 7,9 4,8 2,4 5,44 4,27 6,75 10,6 2,95 2,62 1,69 1,11 1,39 0,74 1,23 2,69 1,74 1,42LI38 x 10 38 9,5 4,8 2,4 6,38 5,00 7,70 11,9 3,49 3,05 1,92 1,10 1,37 0,74 1,29 2,69 1,82 1,45LI44 x 3 44 3,2 6,4 3,2 2,77 2,17 5,04 7,98 2,10 1,55 1,25 1,35 1,70 0,87 1,19 3,14 1,68 1,56LI44 x 5 44 4,8 6,4 3,2 4,05 3,18 7,27 11,52 3,02 2,28 1,69 1,34 1,69 0,86 1,26 3,14 1,78 1,57LI44 x 6 44 6,4 6,4 3,2 5,29 4,15 9,27 14,66 3,88 2,97 2,07 1,32 1,67 0,86 1,32 3,14 1,87 1,59LI44 x 8 44 7,9 6,4 3,2 6,47 5,08 11,08 17,43 4,73 3,62 2,41 1,31 1,64 0,85 1,39 3,14 1,96 1,61LI51 x 3 51 3,2 6,4 3,2 3,16 2,48 8,100 12,98 3,22 2,18 1,64 1,60 2,03 1,01 1,39 3,61 1,97 1,64LI51 x 5 51 4,8 6,4 3,2 4,67 3,67 11,60 18,53 4,67 3,18 2,28 1,58 1,99 1,00 1,45 3,61 2,05 1,56LI51 x 6 51 6,4 6,4 3,2 6,12 4,80 14,70 23,37 6,03 4,09 2,83 1,56 1,95 0,99 1,51 3,61 2,14 1,47LI51 x 8 51 7,9 6,4 3,2 7,43 5,83 17,50 27,70 7,30 4,94 3,31 1,53 1,93 0,99 1,56 3,61 2,21 1,40LI51 x 10 51 9,5 6,4 3,2 8,79 6,90 20,20 31,82 8,58 5,80 3,75 1,52 1,90 0,99 1,62 3,61 2,29 1,32
Moment of inertia cm4
Resistance module cm³
Radius of rotation cm
Position of center of gravity cmDesignation
of profile
Measurements mm A
cm²M
kg/m
ANNEX I
105
a e r r1 IX=IY IZ IT WX WT iX iZ iT d Z1 V1 V2
LII64 x 4 64 4 6,4 3,2 4,93 3,87 18,93 30,06 7,80 4,07 3,25 1,96 2,47 1,26 1,70 4,49 2,40 2,24LI64 x 5 64 4,8 6,4 3,2 5,91 4,64 23,50 37,62 9,38 5,09 3,73 1,99 2,52 1,26 1,78 4,53 2,52 2,01LI64 x 6 64 6,4 6,4 3,2 7,78 6,11 30,20 48,24 12,16 6,62 4,67 1,97 2,49 1,25 1,84 4,53 2,60 1,92LI64 x 8 64 7,9 6,4 3,2 9,49 7,45 36,10 57,61 14,59 8,00 5,46 1,95 2,46 1,24 1,89 4,53 2,67 1,85LI64 x 10 64 9,5 6,4 3,2 11,3 8,87 42,00 66,63 17,37 9,46 6,30 1,93 2,43 1,24 1,95 4,53 2,76 1,77LI64 x 13 64 13 6,4 3,2 14,6 11,5 52,40 82,35 22,45 12,10 7,71 1,90 2,37 1,24 2,06 4,53 2,91 1,61LI76 x 5 76 4,8 7,9 4 7,07 5,55 40,00 63,88 16,12 7,25 5,48 2,38 3,01 1,51 2,08 5,37 2,94 2,43LI76 x 6 76 6,4 7,9 4 9,32 7,32 51,70 82,43 20,97 9,47 6,93 2,36 2,97 1,50 2,14 5,37 3,03 2,35LI76 x 8 76 7,9 7,9 4 11,4 8,95 62,10 98,55 25,65 11,50 8,28 2,33 2,94 1,50 2,19 5,37 3,10 2,28LI76 x 10 76 9,5 7,9 4 13,5 10,6 72,50 115,0 29,97 13,60 9,42 2,32 2,92 1,49 2,25 5,37 3,18 2,19LI76 x 11 76 11 7,9 4 15,6 12,3 82,30 130,0 34,63 15,60 10,60 2,30 2,89 1,49 2,31 5,37 3,27 2,11LI76 x 13 76 13 7,9 4 17,7 13,9 91,50 144,2 38,77 17,50 11,62 2,27 2,85 1,48 2,36 5,37 3,34 2,04LI76 x 16 76 16 7,9 4 21,7 17,1 108,3 169,4 47,32 21,02 13,57 2,23 2,79 1,48 2,47 5,39 3,49 2,86LI89 x 5 89 4,8 7,9 4 8,31 6,52 63,27 100,5 26,04 9,68 7,82 2,76 3,48 1,77 2,35 6,29 3,33 3,13LI89 x 6 89 6,4 7,9 4 11,0 8,63 84,50 135,0 34,07 13,10 9,79 2,77 3,50 1,76 2,46 6,29 3,48 2,82LI89 x 8 89 7,9 7,9 4 13,4 10,5 102,0 163,0 41,04 16,00 11,52 2,76 3,49 1,75 2,52 6,29 3,56 2,73LI89 x 10 89 9,5 7,9 4 16,0 12,6 119,0 189,6 48,44 19,10 13,33 2,73 3,44 1,74 2,57 6,29 3,63 2,66LI89 x 11 89 11 7,9 4 18,5 14,5 136,0 216,0 56,01 21,70 15,06 2,71 3,42 1,74 2,63 6,29 3,72 2,57LI89 x 13 89 13 7,9 4 21,0 16,5 152,0 241,2 62,85 24,50 16,52 2,69 3,39 1,73 2,69 6,29 3,80 2,49LI102 x 6 102 6,4 9,5 4,8 12,6 9,89 129,0 206,6 51,41 17,40 13,03 3,20 4,05 2,02 2,79 7,21 3,95 3,27LI102 x 8 102 7,9 9,5 4,8 15,5 12,2 156,0 249,4 62,62 21,20 15,59 3,17 4,01 2,01 2,84 7,21 4,02 3,20LI102 x 10 102 9,5 9,5 4,8 18,5 14,5 183,0 292,0 74,00 25,10 18,04 3,15 3,97 2,00 2,90 7,21 4,10 3,11LI102 x 11 102 11 9,5 4,8 21,4 16,8 209,0 333,3 84,75 28,90 20,24 3,13 3,95 1,99 2,96 7,21 4,19 3,03LI102 x 13 102 13 9,5 4,8 24,3 19,1 234,0 371,8 96,23 32,60 22,53 3,11 3,91 1,99 3,02 7,21 4,27 2,94LI102 x 16 102 16 9,5 4,8 29,9 23,5 281,0 444,8 117,2 39,70 26,48 3,07 3,86 1,98 3,13 7,21 4,43 2,79LI102 x 19 102 19 9,5 4,8 35,2 27,6 323,0 508,0 138,0 46,40 30,12 3,03 3,80 1,98 3,24 7,21 4,58 2,63LI127 x 8 127 7,9 13 6,4 19,4 15,2 308,0 492,8 123,2 33,40 25,10 3,98 5,04 2,52 3,47 8,98 4,91 4,07LI127 x 10 127 9,5 13 6,4 23,2 18,2 363,0 579,8 146,2 39,60 29,28 3,96 5,00 2,51 3,53 8,98 4,99 3,99LI127 x 11 127 11 13 6,4 27,0 21,2 417,0 665,3 168,8 45,70 33,33 3,93 4,96 2,50 3,58 8,98 5,06 3,92LI127 x 13 127 13 13 6,4 30,6 24,0 468,0 744,8 191,3 51,70 37,15 3,91 4,93 2,50 3,64 8,98 5,15 3,83LI127 x 16 127 16 13 6,4 37,9 29,8 566,0 898,9 233,1 63,30 43,84 3,86 4,87 2,48 3,76 8,98 5,32 3,66LI127 x 19 127 19 13 6,4 44,7 35,1 654,0 1033 274,9 74,10 50,23 3,83 4,81 2,48 3,87 8,98 5,47 3,51LI127 x 22 127 22 13 6,4 51,5 40,4 739,0 1164 314,2 84,70 55,82 3,79 4,75 2,47 3,98 8,98 5,63 3,35LI152 x 8 152 7,9 13 6,4 23,4 18,4 535,0 852,3 217,7 48,20 37,63 4,78 6,04 3,05 4,09 10,8 5,78 4,96LI152 x 10 152 9,5 13 6,4 28,0 22,0 634,0 1013 255,4 57,40 43,51 4,76 6,01 3,02 4,15 10,8 5,87 4,88LI152 x 11 152 11 13 6,4 32,5 25,5 729,0 1162 296,4 66,30 49,79 4,74 5,98 3,02 4,21 10,8 5,95 4,79LI152 x 13 152 13 13 6,4 37,0 29,1 822,0 1311 333,0 75,20 55,14 4,71 5,95 3,00 4,27 10,8 6,04 4,71LI152 x 14 152 14 13 6,4 41,4 32,5 912,0 1451 372,6 83,90 60,85 4,69 5,92 3,00 4,33 10,8 6,12 4,62LI152 x 16 152 16 13 6,4 45,8 36,0 999,0 1586 412,2 92,40 66,39 4,67 5,88 3,00 4,39 10,8 6,21 4,54LI152 x 19 152 19 13 6,4 54,2 42,6 1160 1842 478,1 108,0 75,13 4,63 5,83 2,97 4,50 10,8 6,36 4,38LI152 x 22 152 22 13 6,4 62,6 49,1 1320 2088 552,2 125,0 84,70 4,59 5,78 2,97 4,61 10,8 6,52 4,23LI152 x 25 152 25 13 6,4 70,8 55,6 1460 2295 624,5 139,0 93,56 4,54 5,69 2,97 4,72 10,8 6,68 4,07LI203 x 12 203 13 13 6,4 49,9 39,2 2020 3226 814,5 137,0 103,8 6,36 8,04 4,04 5,55 14,4 7,85 6,51LI203 x 14 203 14 13 6,4 56,0 44,0 2250 3586 914,0 153,0 115,4 6,34 8,00 4,04 5,60 14,4 7,92 6,43LI203 x 15 203 16 13 6,4 62,0 48,7 2470 3943 997,0 169,0 124,6 6,31 7,97 4,01 5,66 14,4 8,00 6,35LI203 x 19 203 19 13 6,4 73,5 57,7 2890 4598 1182 199,0 144,6 6,27 7,91 4,01 5,78 14,4 8,17 6,18LI203 x 22 203 22 13 6,4 85,2 66,9 3300 5244 1356 229,0 162,8 6,22 7,85 3,99 5,89 14,4 8,33 6,02LI203 x 25 203 25 13 6,4 96,7 75,9 3690 5864 1516 258,0 178,4 6,18 7,79 3,96 6,01 14,4 8,50 5,85LI203 x 28 203 29 13 6,4 108 84,8 4070 6446 1694 287,0 195,7 6,14 7,73 3,96 6,12 14,4 8,65 5,70
Moment of inertia cm4
Resistance module cm³
Radius of rotation cm
Position of center of gravity cmDesignation
of profile
Measurements mm A
cm²M
kg/m
ANNEX I
106 ANNEX I
An
DESIGNATIONThread pitchResistant sectionCore section
SYMBOLPitchAs
4.6 4.8 5.6 5.8 6.8 8.8 10.9 12.9 4.6 4.8 5.6 5.8 6.8 8.8 10.9 12.9M-4 0,70 8,78 7,75 149 199 186 249 298 398 559 671 0,11 0,15 0,14 0,19 0,22 0,30 0,42 0,50M-5 0,80 14,2 12,7 244 325 305 407 488 651 915 1098 0,23 0,30 0,28 0,38 0,45 0,61 0,85 1,02M-6 1,00 20,1 17,9 344 459 430 574 689 918 1291 1549 0,39 0,52 0,48 0,64 0,77 1,03 1,45 1,74M-8 1,25 36,6 32,8 632 843 790 1053 1264 1685 2370 2844 0,94 1,25 1,18 1,57 1,88 2,51 3,53 4,23
M-10 1,50 58,0 52,3 1006 1342 1258 1677 2013 2684 3774 4529 1,86 2,49 2,33 3,11 3,73 4,97 6,99 8,39M-12 1,75 84,3 76,2 1467 1957 1834 2446 2935 3913 5503 6603 3,26 4,34 4,07 5,43 6,51 8,68 12,2 14,6M-14 2,00 115 105 2015 2687 2519 3359 4030 5374 7557 9068 5,21 6,94 6,51 8,68 10,41 13,9 19,5 23,4M-16 2,00 157 144 2774 3699 3467 4623 5548 7397 10402 12483 8,11 10,81 10,1 13,5 16,2 21,6 30,4 36,5M-18 2,50 192 175 3371 4494 4213 5618 6741 8989 12640 15168 11,17 14,9 14,0 18,6 22,3 29,8 41,9 50,3M-20 2,50 245 225 4334 5779 5418 7224 8669 11558 16254 19505 15,8 21,1 19,8 26,4 31,7 42,2 59,4 71,2M-22 2,50 303 282 5419 7225 6774 9031 10838 14450 20321 24385 21,6 28,8 27,0 36,0 43,2 57,7 81,1 97,3M-24 3,00 353 324 6241 8322 7802 10402 12483 16644 23406 28087 27,4 36,5 34,2 45,6 54,7 72,9 103 123M-27 3,00 459 427 8221 10961 10276 13701 16441 21922 30828 36993 40,2 53,6 50,3 67,0 80,4 107 151 181M-30 3,50 561 519 9989 13319 12487 16649 19979 26639 37460 44953 54,5 72,6 68,1 90,8 108,9 145 204 245
Quality Qualitymm mm mm² mm²
Tighting torque Ma (kg·m)Friction coeficient m = 0,14
Ø Pitch As An Uplift load Ft over the bolt (kg)
TIGHTING TORQUE BOLTED JOINT (STANDARD DIN-267)
in mm
1/2 12,705/8 15,883/4 19,057/8 22,23
1 25,401 1/8 28,581 1/4 31,751 3/8 34,931 1/2 38,10
207,38293,79383,37511,54
34,5660,4998,79
147,47
ASTM A325
ASTM A490
Tighting torque Ma (kg·m)
17,28
67132
13,8327,3648,3978,63117,52145,17204,50269,31356,01
29030362874626654885
6804108861587622226
25401322053855546720
121148
Uplift load Ft over the bolt (kg)
ASTM A325
ASTM A490
54438618
127011769023133
85103
ASTM A490
152435496480102
39515671
ASTM A325
121928
Ø Uplift load Ft over the bolt (kg)
TIGHTING TORQUE BOLTED JOINT (STANDARD ASTM)
107 ANEXO I
9.9. HEX HEAD BOLTS MOST FREQUENTLY USED d1 M12 M16 M20 M24b 19,5 23 26 29,5x 2,5 3 4 4,5
emin 20,88 26,17 32,95 39,55
k 8 10 13 15m 10 13 16 19 12 16 20 24r 0,6 0,6 0,8 0,8 8 30 35 40 40s 19 24 30 36 9 " " " 45d2 13,5 17,5 21,5 25,5 10 35 " " "
11 " 40 " "12 " " " "13 " " 45 "
d1 M12 M16 M20 M24 14 " " " 50Lentgh L 15 40 " " "
20 0,068 - - - 16 " 45 " "25 0,073 - - - 17 " " " "30 0,077 0,141 0,245 - 18 " " 50 "35 0,081 0,148 0,257 - 19 " " " 5540 0,085 0,156 0,269 0,414 20 45 " " "45 0,089 0,163 0,280 0,431 21 " 50 " "50 0,094 0,171 0,292 0,448 22 " " " "55 0,098 0,178 0,304 0,465 23 " " 55 "60 0,102 0,186 0,316 0,481 24 " " " 6065 0,106 0,193 0,327 0,498 25 50 " " "70 0,110 0,201 0,339 0,515 26 " 55 " "75 0,114 0,208 0,351 0,532 27 " " " "80 0,119 0,216 0,363 0,549 28 " " 60 "90 0,127 0,231 0,386 0,583 29 " " " 65
100 0,135 0,246 0,410 0,617 30 55 " " "110 0,144 0,261 0,433 0,650 31 " 60 " "120 0,152 0,276 0,457 0,684 32 " " " "130 0,161 0,291 0,481 0,718 33 " " 65 "140 0,169 0,306 0,504 0,752 34 " " " 70150 0,177 0,322 0,528 0,786 35 60 " " "160 0,186 0,337 0,551 0,819 36 " 65 " "170 0,194 0,352 0,575 0,853 37 " " " "
38 " " 70 "nut weight 0,015 0,031 0,06 0,097 39 " " " 75washer weight 0,019 0,029 0,042 0,062 40 65 " " "
41 " 70 " "42 " " " "43 " " 75 "44 " " " 8045 70 " " "46 " 75 " "47 " " " "48 " " 80 "49 " " " 8550 75 " " "
WEIGHT PER UNIT WITH NUTDIN 555 AND WASHER DIN 7989
kg
LENGTHS OF BOLTS WITH
WASHER DIN 7990
d1
TH
ICK
NE
SS
TO
BE
JO
INT
Avda. Menéndez Pelayo, 6728009 - Madrid - SpainTel.: (+34) 91 557 03 45Fax: (+34) 91 409 77 60www.jbsa.es
Jiménez Belinchón, S.A.
Bosque de Duraznos, 64Bosques de las Lomas, Delegación Miguel Hidalgo11700 - México, D.F.Tel.: (+52) 55 52515352Fax: (+52) 55 52515345www.jbsa.com.mx
.
MÉXICOJiménez Belinchón Mexico, S.A. de C.V.
Avda. Menéndez Pelayo, 6728009 - Madrid - SpainTel.: (+34) 91 400 97 20Fax: (+34) 91 400 97 23www.mundoforma.com
Mundoforma S.A.U
Sabana Sur, de Librería Universal 600 m Sur, 25 m Oeste10108 - San José - Costa RicaTel.: (+506) 2290 4342
COSTA RICAJiménez Belinchón Costa Rica, S.A.
DELEGACIÓN EE.UU.JB SEPSA Renewables
JIMÉNEZGrupo
ITALIAJIMÉNEZ BELINCHÓN ITALIA, S.R.L
Via Francesco Crispi, 360 0187- Roma - ITALYTel.: (+39) 3381922363
445 DUANE AVESchenectady NY 12304Tel.: (518) 381-7100Fax: (518) 381 – 7117www.jbsepsa.com
www.grupojbelinchon.com
Serie GEMAS