Post on 18-Apr-2022
CSD1300G
INTRODUCTION & SPECIFICATIONS
1
CSD1300G DIAMOND DRILLING RIG
CSD1300G drilling rig is specially designed for diamond drilling on ground surface.
Track crawler mounted rig facilitates moving around with great convenience. Robust
structure plus strong power supply ensures high penetration rate and out standing reliability.
The up to date design of hydraulic system makes CSD1300G one of the most favored
models around the world.
The following high lights represent the rig’s major features,
1. pilot system greatly improved efficiency of the hydraulic system
2. 4 speeds gear box provides free combination of torque and spindle speed
3. big chuck diameter of 117mm applies BQ to PQ size rods
4. 3.5m long stroke of drill head facilitates handling of rods of 3m length
5. mast exceptional long dumping distance guarantees perfect stability during drilling
6. mast folding/stretching structure facilitates rig set up
7. independent hydraulic jacks facilitates leveling of the rig
8. accurate and easy control of feed pressure
9. head floating enables breaking/making rods with out damaging them
10. pre installed in hydraulic circuit checking points ensure easy diagnosing of
hydraulic troubles, plus front opening design of control panel making repairing
easy & convenient
11. real time reading of drilling data on gauges on the control panel
12. mud pump flow hydraulic controlled on the rig’s panel
13. top grade hydraulics of European/US origin
14. powerful main winch of US origin
15. wire line winch with rope arrangement set
2
CSD1300G SPECIFICATIONS
DEPTH CAPACITY MAIN WINCH
Rod size Depth Pull 6,800 Kg (bare drum)
BQ 1,300M Speed 51m/min (bare drum)
NQ 1,000M Rope Diameter 16mm
HQ 700M Rope Length 30m
PQ 400M
WIRE LINE WINCH
POWER PACK With rope arrangement set
Diesel Cummins 6BTA Pull 1,100 Kg (bare drum)
Displacement 5.9L Speed 120m/min (bare drum)
Type Turbo Charge Rope Diameter 6.6 mm
Cooling water Rope Length 1,300 m
Power 132Kw @ 2,500 rpm
MUD PUMP
HYDRAULIC SYSTEM Model BW160
Working Pressure 26 MPa Max Flow 160L/Min
Cooling Air Max Pressure 10MPa
DRILL HEAD MUD MIXER
Chuck Spring Closed, Hydraulic Open Parker Motor
Chuck Inner Diameter 117mm
Number of Chuck Jaws 7 pieces TRACK CRAWLER
Max Torque 506-4,257NM Max Climbing Angle 30 degree
Spindle Speed Walking Speed 2 .5 km/h
shift RPM
1st 0 - 190 rpm FOOT CLAMP
2nd 0 - 378 rpm V type
3rd 0 - 675 rpm Number of Jaws 2 pieces
4th 0 - 1,200 rpm
GROSS WEIGHT 9,500Kg
MAST
Two sections, manually folding and opening WALKING SIZE
Mast Height 9 m (L*W*H) 5,382x2,300x2,600mm
Mast Dump 1.4 m
Drilling Angle 45 –90 degree
Push 5,500Kg
Pull 12,000Kg
Stroke 3,500mm
3
Panel Front Opening
Drill Head
Control Panel
Wire Line Winch with rope arrangement
4
Authorized Dealer &
Sole Agent for African countries
Unicon Ltd. G/F., 411 Shanghai Street,
Yaumatei, Kowloon,
Hong Kong
Tel. : +852 2186 6930
Fax. : +852 2186 6931
Website : www.unicon.hk
e-mail : achoi@unicon.hk