INDUCTION HEATING TOOL FOR SAFE & EFFECTIVEHEATING IN THE WORKSHOP - DHI-30

• Mobility- chassis for easy crossing. Cable 6 m lenght.• Capacity3kW - Smooth power control and integrated water

cooling.• Flexibilityofuse- 1x 230 V supply - simple and quick insta-

llation. Connection with 16 A socket.• Versatile applications - to shape, flat, round or positioned

standard components.

• Parts that require preheating before welding in the automotive, railway and shipbuilding industry.

• Pipes, flanges, plates, production, construction and repairs.• Petrochemical industry, heat exchangers, boilers, pressure

vessels.• Manufacture, repair, renovation and maintenance.AP

PLIC

ATIO

N

ADVA

NTAG

ES

Pražská343/20,67401Třebíč,CzechRepublicphone:+420602364884,web:www.dawell.cz,e-mail:sales@dawell.cz

THEINDUCTIONHEATERDHI-30is a portable inverter power source with integrated power control and water cooling induction burner. Induction heating DHI-30 is designed for quick and efficient dot heating of ferromagnetic materials for the straightening plates, permits nuts and bolts, heating bearings and shafts, structures and pipes in order bending etc. Efficient water cooling system ensures the correct working temperature induction burner and thus the durabi-lity thermally stressed parts. Control is designed lucid display and buttons on the front panel of the machine. The actual heating is activated by a button on the handle of the torch similarly as in welding. Interchangeable attachments induction burner allow the use of several types of coils

Lower costs for staff training, lower wage costs. There‘s no need to train staff regularly to work with oxyacetylene torches and PB.

Induction heating DHI-30 finds application in the trans-portation, maintenance, productions, maintenance and so on. Very practical utilization finds induction heating DHI-30 mainly in garages and metal workshops where effective substitute hot flame.

Low operating costs and low cost of consumables. No gas costs. Low power consumption. The highly energy-efficient heating system.

Induction heating of ferromagnetic materials, machine series DHI-30 is very effective and safe way heating parts, constructions etc. in plants. Induction is a modern, quick and clean method of heating.

TECHNICALDATA DHI-30Inputpower 3.5 kWOperatingfrequency 20-60 kHzFuse 16 ASupplyvoltage/current 1x230 V, 50/60 HzTheoutputpowerofinduction 3 kWThelengthoftheoutputcable 3 mInductionburnercooling water coolingThecontentsofthewatertank 1.5 lBackup IP 21Dimensions 430x200x200 mm Weight 7.8 kg

Increased security and better working conditions for staff. The operator is not exposed to an open flame, hot gases and the risk of fire and explosion in the use of flame.

DHI-30 heated M12 bolt or nut temperature to 800°C within 15 seconds. Preparation use is substantially faster than preparing autoge-nous kit. Involving heating the socket 1x 230 V attaching induction heating burner section and press control button immediately begins the process of induction heating. The heated part is rapidly heated as required to „red“.

Changes reserved.