Post on 05-Aug-2020
The Whole World Behind Glass
ST-VITRINEN TRAUTMANN
EXHIBITION DISPLAY CASES,SHOWCASES AND DIGITAL SIGNAGE SYSTEMS
INDOORDISPLAY CASES
EDITION 4.0
ALL-GLASS DISPLAY CASES
PROFILE DISPLAY CASES
SHOWCASES
PARTITION WALLS & LIGHTBOXES
e.VITRUM – MONITOR DISPLAY CASES
6
32
50
62
66
C O N T E N T S
INDOOR-CATALOGINTRODUCTION + PRODUCT OVERVIEW
Dear customers,
We are happy to present our new
ca ta l og w i t h ou r INDOOR
products. Just like with our display
cases and showcases for outdoor
use, we have updated our product
range for the interior by improving
our proven technology even
fur ther. Our showcases and
d i sp la y ca se s have p roven
themselves for decades, even with
our high quality standards. Now
more than ever, our products
g u a r a n t e e t h e h i g h e s t
func t ional i t y, longev i t y, low
maintenance and the possibility
of individualization according to
the wishes of our customers. In
this catalog, you will find the
h i g h e s t q u a l i t y a n d m o s t
prestigious glass display cases
and showcases for the interior that
we have ever created.
We have been successful for
decades and are particularly
proud of the fact that we still reside
a t o u r l o c a t i o n , B i e l e f e l d
G e r m a n y. We s u p p l y o u r
customers since 1969 with the
highest-quality ST-products made
in Germany.
Your ST-Vitrinen-Team
New Product NamesThis catalog introduces our new
product names for our INDOOR
products and applies them to all
r e l a t e d d i s p l a y c a s e s a n d
showcases. For a more consistent naming as
well as a better comprehensibility
for our international customers,
we have g iven main ly Lat in
sounding names. The suffix “-um”
usually implies that the product is
part of the PREMIUM-series, the
suf f ix “-us” impl ies that the
product is part of the PRIMUS-
series.
PREMIUM and PRIMUS There is another change with our
new classification of our product
portfolios into a PREMIUM and a
P R I M U S s e r i e s . T h e n e w
classification does NOT mean
that these product ranges have
different standards. PREMIUM
products are characterized by the
fact that they are highly variable
and customizable. From a single
product to a large series, all
options in terms of dimensions,
s u r f a c e , a c c e s o r i e s a n d
equipment are available to you.
The products of the PRIMUS series
meet the same high qual i t y
s tandards , bu t w i th l im i ted
va r iab i l i t y and in s tandard
dimensions. You will therefore find
high quality ST-products for a
much lower price in the PRIMUS
series. Additionally, they are
usually manufactured in much
larger quantities and therefore
available from stock.
Good to Know…
4
Museum Display CasesEXPONATUM Page 8
5
Design Display CasesSIGNUM Page 22
Profile Display CasesVERTUM Page 32
Profile Display CasesVERSUS Page 38
Display Case – ElementsKUBUS Page 42
All-Glass Display CasesFANUM Page 16
Poster Frames DISKUSPartition Walls APERUM 62
ShowcasesPREMIUM & PRIMUS p. 50
Monitor Display Casese.VITRUM Page 66
6
EXHIBIT DISPLAY CASESINDOOR | PREMIUM
IV 061
EXHIBITION DISPLAY CASES
7
EXPONATUM | Museum Display Cases
FANUM | All-Glass Display Cases
SIGNUM | Design Display Cases
Galerie | All-Glass Display Cases
VERTUM | Profile Technology Display Cases
VERSUS | Profile Technology Display Cases
KUBUS | Display Cases – Elements
Galerie | Profile Technology Display Cases
Lighting Technology
8
16
22
24
32
38
42
44
48
KEY FACTS
× High-quality all-glass display cases with VSG safety glass
× Invisible closure technology
× Multiple effective lighting options with LED-technology
× Dustproof construction, optional with passive air conditioning
× Continuous height-adjustable glass shelves on stainless steel bars or optically discreet cord suspension
EXPONATUM
EXPONATUM | MUSEUM INDOOR | PREMIUM
The newly developed all-glass
series EXPONATUM is especially
useful for museums and other
demanding exhib i t ions. Thei r
dimensions, shape, and coloring
are highly customizable to fit your
very own needs. This way, you can
individualize each and every exhibit
according to your wishes for perfect
exhibitions.
EXPONATUM | INDOOR | PREMIUM
IV 081
8
Concealed c los ing e lements ,
transparent glass surfaces as well
as various possibilities for inte-
grated air conditioning and safety
technology meet all technical and
design claims of a contemporary
scenography.
Variable Glass Shelves
We offer the EXPONATUM-series
with two different opening variants.
For Type 1, you can open the display
case with the glass door via a
concealed rotary belt (IV 095). For
Type 2, you can open the display
case via a completely removable
shim that is screwed on the head (IV
096).
Variable Glass Shelves
Round stainless steel rods form the
secure basis for the individual glass
shelves carrier, which can be
adjusted continuously in the height
(IV 093).A l t e r na t i v e l y, we can u se a
suspension on very robust and
extremely thin steel cables which
look so subtle that is looks as if the
glass shelves in the display case are
almost floating (IV 094).
Brilliant LED-Lighting
You can choose between a variety
of l ight ing opt ions. Use eye-
catching light effects to highlight
individual exhibits with LED-spots
or choose an even lighting with light
guide plates at the top of the display
case.
You can find additional lighting
solutions on page 48 »
IV 093 IV 094
IV 091
IV 095
IV 092
IV 096
9
10
EXPONATUM | MUSEUMINDOOR | PREMIUM
IV 093
PRODUCT DETAILS
Standard Sizes [B×H×D]
1000 × 1900 × 500 mm1200 × 1900 × 500 mm1400 × 1900 × 500 mmIndividual dimensions on request.
Lighting
Revolving door with concealed bands.Safety locks in the lower area.Optional: opening via completely removable shimwith a stainless steel thread plate.
Opening
Individual LED-spots, placeable anywhere onvertical stainless steel rods or bars. Optional: head element with integratedLED-lighting. Various special solutions on request.
Floor cabinets and base constructions inmany different versions with various surfacesand materials.
Alternative Options
IV 101
EXPONATUMCabinet Showcases
The cabinet showcase offers the most exhibition space among the products of the EXPONATUM-series. The height-adjustable glass shelves give enough room for large exhibits to be looked at from all sides.
You can place various LED-spots on vertical, magnetic contact rails to present the exhibits according to your wishes. Alternatively, area lighting with a circumferential wreath-profile can be integrated into the head.
Closed bases or lockable cabinet substructures in freely selectable colors and surfaces provide additional storage room and give you more freedom of design for your individual needs.
IV 102
EXPONATUMPillar Display Cases
A pillar display case is best used when individual objects ought to be presented from all sides with equal intensity. The view is improved by a transparent glass construction with no visually disruptive components.
The EXPONATUM pillar display cases are customizable in all dimensions. This gives you the option to use very slim or half-high pillar display cases.
Additionally, you can place various LED-spots on vertical, magnetic contact rails to present the exhibits according to your wishes.
Substructures as closed base or as lockable cabinet are possible as well.
PRODUCT DETAILS
Standardgrößen [B×H×D]
500 × 1900 × 500 mm600 × 1900 × 600 mmIndividual dimensions on request.
Lighting
Front- or rear revolving door with concealed bands.Safety locks in the lower area.Optional: opening via completely removable shimwith a stainless steel thread plate.
Opening
Individual LED-spots, placeable anywhere onvertical stainless steel rods or bars. Optional: head element with integratedLED-lighting. Various special solutions on request.
Floor cabinets and base constructions in manydifferent versions with various surfaces andmaterials. Half-height versions for pedestals / tables. Pillars in 6- or 8-angular shape.
Alternative Options
IV 111
IV 112
11
12
EXPONATUM | MUSEUMINDOOR | PREMIUM
EXPONATUMBonnet Display Cases
A bonnet display case presents a scenery with an optimal effect. The elegant dis-play case shifts the attention toward the exhibit to impress from any angle.
With individual, freely positionable LED-spots you can support single aspects of the exhibit as you wish. Alternatively, you can also illuminate the exhibit from all sides with a maximum of brilliance.
PRODUCT DETAILS
Standard Sizes[B×H×D]
400 × 1600 × 400 mm(Height of the glass body 400 mm)500 × 1600 × 500 mm(Height of the glass body 500 mm)Individual dimensions on request.
Lighting
Revolving door with concealed bands.Safety lock in the lower area.Optional: Glass body removable from the top.
Opening
Individual LED-spots, placeable anywhere onvertical pillars as single- or duo- spot. Optional: LED-spot on vertical stainless steel rod. Various special solutions on request.
Floor cabinets and base constructions inmany different versions with various surfacesand materials.
Alternative Options
IV 341IV 121
IV 122
EXPONATUMTABLE DISPLAY CASES
A table display case presents its exhibit so that viewers look from an angle above. A transparent frameless all-glass construc-tion is especially useful for that since no cross-profiles obstruct the view into the display case.
Furthermore, table display cases are used as typical bar display cases which often use the variants with lockable base cabi-nets. This assures that, for instance, sales items are stored safely.
PRODUCT DETAILS
Standard Sizes[B×H×T]
1000 × 970 × 500 mm1200 × 970 × 500 mm1500 × 970 × 500 mm(Height of the glass body 20 mm)Individual dimensions on request.
Lighting
Glass body can be hinged upwards, supportedand secured by lateral gas pressure springs.Safety lock in the front area.
Opening
Individual LED-spots, placeable anywhere ahorizontal crossbar in the rear area of thetable display case.Optional: LED-light rail or single LED-spots Various special solutions on request.
Floor cabinets with lockable revolving orsliding doors.Legs or closed substructures in various versions,surfaces and materials.
Alternative Options
IV 132
13
IV 131
EXPONATUMWall Display Cases
Wall display cases are usually used to exhibit objects with smaller dimensions. These display cases are also often referred to as hanging display cases. They typically come with a depth of 200 mm and are fastened to a wall with a hanger module. They allow to present exhibits at the eye-level of the viewers. Additionally, the magnetic rear wall allows the attach-ment of posters and other kinds of infor-mation.
PRODUCT DETAILS
Standard Sizes[B×H×D]
800 × 800 × 200 mm1000 × 1000× 200 mmUsable internal depth approximately 180 mmIndividual dimensions on request.
Lighting
Revolving door with concealed rotating bands.Safety lock in the lower area.
Opening
Individual LED-spots, placeable anywhere onvertical stainless steel rods.Various special solutions on request.
Gap-free all-glass front through opening witha removable glass body with a padlock.
Alternative Options
IV 142
14
EXPONATUM | MUSEUMSVITRINENINDOOR | PREMIUM
IV 141
15
IV 151
FANUM | ALL-GLASS DISPLAY CASESINDOOR | PREMIUM
PRODUCT DETAILS
Standardgrößen [B×H×D]
1000 × 1900 × 500 mm1200 × 1900 × 500 mm1400 × 1900 × 500 mmIndividual dimensions on request.
Lighting
Two-leaf revolving door with attached bandsat the top and the bottom.Safety lock in the lower area.
Opening
Individual LED-spots, placeable anywhere onvertical stainless steel rods.Optional: Head-element with integratedLED-lighting. Various special solutions on request.
Floor cabinets and base constructions inmany different versions with various surfacesand materials.
Alternative Options
FANUMCABINET SHOWCASE
The cabinet showcases of the FANUM all-glass series are our classical product for the demanding object exhibition – for the presentat ion of pr ivate collectibles to the equipment of complete museums, this proven model is used all over the world. A user-friendly operation, a transparent all-glass construction and best processing gua ran t ee an e x ce l l e n t p r i c e performance ration for exhibitions with high standards.
The variable dimensions and designs with individual pedestal or cabinet substructures provide high adaptability to your spatial ambience.
IV 161
16
IV 162
FANUMPillar Display Cases
Pillar Display Cases in all-glass construc-tion offer a particularly slim, elegant appearance and a great presentation of exhibits from all angles. With high-quality lighting elements, fittings and functional details FANUM pillar display cases are the ideal complement to the cabinet showcases for demanding exhibitions.
Again, we offer a range of design variants in which you are free to choose between closed sockets or lockable floor cabinets which are available in many different versions.
PRODUCT DETAILS
17
Standard Sizes[B×H×D]
500 × 1900 × 500 mm600 × 1900 × 600 mm Individual dimensions on request.
Lighting
Single revolving door with attached bandsat the top and the bottom.Security lock in the lower area.
Opening
Individual LED-spots, placeable anywhere onvertical stainless steel rods.Optional: Head-element with integratedLED-lighting. Various special solutions on request.
Floor cabinets and base constructions inmany different versions with various surfacesand materials.
Alternative Options
IV 172
IV 171
FANUM | ALL-GLASS DISPLAY CASESINDOOR | PREMIUM
18
FANUMBONNET DISPLAY CASES
We offer two variants of the bonnet dis-play cases. The first variant's glass body can be removed from the top. Therefore, the exhibition area is perfectly closed and dustproof.
Optionally, you can receive the display case with a comfortable opening via a (glass) revolving door at one side. Various LED-lighting options allow you to illumi-nate your exhibits in the most effective way.
PRODUKTDETAILS
Standard Sizes[B×H×D]
400 × 1600 × 400 mm(Height of the glass body 400 mm)500 × 1600 × 500 mm(Height of the glass body 500 mm)Individual dimensions on request.
Lighting
Glass body removable from the top.Optional: Revolving door with elegant bands.Security lock in the lower area.
Opening
LED-spots on vertical single pillars assingle- or duo-spot.Optional: LED-spot on the vertical stainlesssteel rod.Various special solutions on request.
Floor cabinets and base constructions inmany different versions with various surfacesand materials.
Alternative Options
IV 341IV 121
IV 122
IV 181
IV 182
FANUMTable Display Cases
A table display case is a great choice if you want viewers to look from an angle above. The frameless all-glass construc-tion offers a clear view and underlines the noble appearance of the high quality of the exhibited objects. In combination with closed substructures and floor cabinets, the table display cases are an excellent choice for bar display cases as well.
PRODUCT DETAILS
Standard Sizes[B×H×D]
1000 × 970 × 500 mm1200 × 970 × 500 mm1500 × 970 × 500 mmHeight of the glass body 220 mmIndividual dimensions on request.
Lighting
Glass body can be hinged upwards, supportedand secured by lateral gas pressure springs.Security lock in the front area.
Opening
LED-spotlight, placeable anywhere on thehorizontal stainless steel bars in the rear areaof the display case.Optional: Head-element with integratedLED-lighting. Various special solutions on request.
Floor cabinets with lockable revolving orsliding doors. Legs or closed substructures inmany different versions with various surfacesand materials.
Alternative Options
19
IV 192
neues
Rendering
IV 191
FANUMWALL DISPLAY CASES
Wall display cases are the go-to display cases when it comes to exhibiting small objects. These display cases that are also often referred to as hanging display cases with a typical depth of 200 mm are fas-tened to a wall through a hanger module. They allow to present exhibits directly at the eye-level of the viewers. Additionally, the magnetic rear wall allows the attach-ment of posters and information.
PRODUCT DETAILS
Standard Sizes[B×H×D]
800 × 800 × 200 mm1000 × 1000× 200 mmUsable depth (inside) approx. 180 mmIndividual dimensions on request.
Lighting
Two-leaf revolving door with attached swivelbands at the top and the bottom.Security locks in the lower area.
Opening
LED-spotlight, placeable anywhere on thehorizontal stainless steel bars.Various special solutions on request.
Alternative Options
IV 202
IV 201
Individual solutions, e.g. a precise installationin wall recesses.
FANUM | ALL-GLASS DISPLAY CASESINDOOR | PREMIUM
20
FANUM VWall Display Cases
The FANUM V wall display cases in our popular VITRUM-design stand out with a frameless all-glass front with a white passepartout behind an aluminum hous-ing construction. It can be opened with a folding wing that is kept safe by gas pres-sure springs.
PRODUCT DETAILS
Standard Sizes[B×H×D]
1369 × 1114 × 227 mm1369 × 1364 × 227 mmUsable depth (inside) approx. 200 mmIndividual dimensions on request.
Lighting
Folding wing to open the display case fromthe top, supported by lateral gas springs. Security locks in the lower area.
Opening
LED-spots integrated into the top of thedisplay case.
Various special solutions on request.
Alternative Options Eloxal-, RAL- and other special colors ofyour choice for the aluminum housing.Passepartout-print in the color of your choice.
21
IV 211
IV 212
SIGNUM | DESIGN DISPLAY CASESINDOOR | PREMIUM
big story & out of the blue
Products of the SIGNUM-series stand out by their design-oriented shape and col-ors. They combine the normal transparent all-glass construction with backprinted surfaces to give them a great-looking passepartout frame. As a result, the mod-ern design focuses the viewers' attention toward the exhibits and the overall per-ception is improved.
The invisible back of the display cases can serve as additional storage room for other sales items or exhibits. A black base plate made of glass with angular alumi-num feet emphasizes the noble design of the display cases once more.
PRODUCT DETAILS
Two permanently installed glass decorationshelves in the upper area, a glass shelf in thefloor cabinet. Black glass footplate withaluminum feet. Individual coloring througha variety of selectable RAL-colors.
Alternative Options
big story | IV 221
22
out of the blue | IV 222
Standard Sizes[B×H×D]
Model big story:902 × 1869 × 380 mmFootplate: 1022 × 500 mmModel out of the blue:450 × 1869 × 380 mmFootplate: 570 × 500 mmHeight of the exhibition part: 1128 mm
Lighting
Single (out of the blue) or two-leaf revolvingdoor (big story) with one or two security locksin the lower area
Opening
No lighting.Individual solutions on request.
SIGNUM
SIGNUM
The products first sight and italian sky com-bine the classic application of pillar dis-play cases with the design of the SIGNUM-series. The slim, stretched appearance of the model first sight is pre-destined for the exhibition of very high quality objects. The segments at the top and the bottom seem like a frame that encloses the exhibits and puts special emphasis on them. The smaller model italian sky is made for exhibits that speak for themselves – detached from anything else. Directly at eye-level.
PRODUCT DETAILS
first sight | IV 231
italian sky | IV 232
Standard Sizes [B×H×D]
Model first sight:350 × 1860× 350 mmFootplate: 470 × 470 mmHeight of the exhibition part: 750 mmModel italian sky:500× 1720× 300 mmFootplate: 620 × 400 mmHeight of the exhibition part: 565 mm
Lighting
Revolving door with a security lock at the bottom.Opening
No lighting.Individual solutions on request.
Model first sight: A glass decoration shelveat the top. Additional glass shelves in thefloor cabinet.Individual coloring through a variety ofselectable RAL-colors.
Alternative Options
23
first sight & italian sky
IV 241| Bonnet display cases with individ-ual exhibits in the Glass Museum in Lauscha.
IV 242 | Table display cases in the con-centration camp exhibition in Dachau.
IV 244 | Säulenvitrine mit seitl. Drehtür zur Präsentation des DFB-Pokals.
IV 251 | All-glass wall display case in the State Museum of Natural History in Karlsruhe (Photo: Volker Griener).
IV 252 | All-glass cabinet showcase in the foyer of the Leibnitz University / Hannover.
IV 253 | Company exhibition in the foyer of the MTU Aero Engines AG.
IV 254 | Cabinet showcases and table display cases for the mineral collection in the St Peter's Archabbey in Salzburg.
24
GALLERY | ALL-GLASS DISPLAY CASES
IV 241
IV 244IV 243IV 242
25
IV 251
IV 254IV 253
IV 252
IV 261 | Art and cultural exhibition with all-glass display cases of the FANUM-series in various designs.
IV 263 | FANUM all-glass display case as hexagonal pillar display case.
IV 264| All-glass display cases with illu-minated ceiling in the Volkskunde (folk-lore) Museum Schleswig-Holstein.
IV 271 + 272 | Custom-made all-glass display cases for the State Museum of Natural History in Karlsruhe (Photos: Volker Griener).
26
GALLERY | ALL-GLASS DISPLAY CASES
IV 261
IV 263 IV 264
IV 262IV 262
27
IV 271
IV 272
IV 281 | Wall display cases with stainless steel elements in the Spreewaldbahn Museum in Luebbenau.
IV 284 | All-glass display case with a brass-frame construction for the statio-nery constructor Montblanc.
28
GALLERY | ALL-GLASS DISPLAY CASES
IV 281
IV 283 IV 284
IV 282
IV 291 | Pillar display case with pedestal and head in wood décor.
IV 292 | All-glass display case for the mineral collection in the St Peter's Archabbey in Salzburg.
IV 293 | Custom-made all-glass display case for the trophy collection in the Audi Driving Experience Center in Neuburg.
29
IV 293
IV 292
IV 291
IV 301 | Table display case with an indented and lockable floor cabinet.
IV 302 | Table display case a lockable floor cabinet.
IV 303 | Table display case of the EXPONATUM-series. In the open state, the cover is held by gas springs.
IV 304 | Low-built table display case for a specific viewing angle from above.
30
GALLERY | ALL-GLASS DISPLAY CASES
IV 301
IV 302
IV 303 IV 304
IV 311 | Laterally closed table display case with an open substructure.
IV 312 | Classical table display case on four slightly indented tubular steel legs.
IV 313 | Half-height cabinet showcase with flat base construction and an addi-tional decorative floor made of glass.
IV 314 | Display case combination of the FANUM-series in a design line with a bon-net display case and two table display cases for the Arts Foundation Salzwedel. One table display case contains 4 roller-mounted drawers in the substructure.
31
IV 311 IV 312
IV 314IV 313
IV 315
VERTUM | PROFILE TECHNOLOGY DISPLAY CASES
INDOOR | PREMIUM
KEY FACTS
× Classical construction with angular or rounded aluminum profiles
× ESG safety glass for all outer glass surfaces
× Available in all anodized colors, RAL- or special colors
× Effective and energy-efficient LED-lighting technology
× Meets the highest fire and accident protection requirements set by the DGUV (German Statutory Accident Insurance)
VERTUM & VERTUM G
Our glass display cases wi th
aluminum profile technology have
been used for decades. They are a
great choice whenever a sturdy
construction and a good price
performance ratio is required. Our
self-developed profiles and corner
connectors, which are available
both with a round or angular
design, form the foundation for the
many variants of the customizable
product series VERTUM.
The 32 mm wide profiles are made
of torsion-free, extruded alumi-
num. They are connected through
frame prof i les and custom-f i t
corner connectors and screwed
from the inside to make them
almost invisible. This construction
method allows the construction of
sturdy glass display cases in very
large dimensions for particularly
heavy exhibits.
32
IV 321
ANGULAR & ROUNDED
All VERTUM display cases are available with angular or
rounded profiles and corner connectors. The round
variant is called VERTUM G. Both variants fulfil the
current DGUC accident / fire protection requirements for
the installation in schools, day-care centers or other
public institutions. Even though the rounded design
boasts an even higher protection against fire and
accidents, you can choose between both solely based on
the design and the building environment.
SLIDING DOORS & REVOLVING DOORS
The cabinet showcases and the wall display cases of the
VERTUM-series can either be opened by sliding- or by
revolving doors, depending on your preference. Our
smooth-running sliding doors are mounted on roller
bearings and provide the advantage that they do not
stand out in the opened state as well as being easy to
open in confined spaces. Revolving doors offer the
option to open the glass display case completely, which
makes it easier to place large exhibits in them. Both
variants come with fitting and locking technology that
fulfil our highest quality ST quality standards.
33
VERTUM - IV 333
VERTUM G - IV 334
SLIDING DOORS - IV 332
REVOLVING DOORS- IV 331
VERTUMCABINET SHOWCASES
INDOOR | PREMIUM
Cabinet showcases from the VERTUM-series offer large glass fronts with a great viewing area and are therefore perfect for exhibits in large dimensions.
They have numerous possibilities when it comes to shape, color and dimensions, as well as diverse lighting and accessories options. For example, the showcase can be adjusted individually according to the scenographic requirements.
PRODUCT DETAILS
Standard Sizes[B×H×D]
IV 341
IV 343
IV 342
Lighting
Zweiteilige, rollengelagerte Schiebetür mit Aluminium-Führungsprofilen.Druckzylinder-Sicherheitsschloß.Optional: Mittig geteilte, zweiflügelige Drehtür mit Sicherheitsschlössern.
Opening
LED-Spots im Deckenbereich der Vitrine.Optional: Höhenverstellbare LED-Spots an senkrechten Edelstahl-Stangen.Diverse Sonderlösungen auf Anfrage.
Eloxal-, RAL- and other special colors of your choice.Floor cabinets and base constructions in manydifferent versions with various surfaces and materials.
Alternative Options
34
VERTUM | PROFILE TECHNOLOGY DISPLAY CASES
1020 × 2000 × 520 mm1220 × 2000 × 520 mm1520 × 2000 × 520 mm2020 × 2000 × 520 mmIndividual dimensions on request.
VERTUMPILLAR DISPLAY CASES
The elegant VERTUM pillar display cases have remarkably narrow aluminum frame profiles. Their 32mm view width allow a great insight into the display case from all angles and therefore present the exhibits in the best way possible.
PRODUCT DETAILS
Standard Sizes[B×H×D]
520 × 2000 × 520 mm620 × 2000 × 620 mmIndividual dimensions on request.
Lighting
Einflügelige Drehtür, nach rechts öffnend, mit oben u. unten angebrachten, formschönen Drehbändern.Druckzylinder-Sicherheitsschloß im mittlerenBereich der Vitrinentür.
Opening
LED-spots integrated into the top of the displaycase. Optional: height-adjustable LED-spots onthe vertical stainless steel bars.Various special solutions on request.
Eloxal-, RAL- and other special colors of yourchoice. Floor cabinets and base constructionsin many different versions with various surfacesand materials.
Alternative Options
IV 352
IV 351
35
VERTUMTABLE DISPLAY CASES
Table display cases are the perfect choice whenever flat exhibits ought to be pre-sented. The windows allow the view from the top, which, for example, is particularly advantageous for antique documents or valuable books.
In addition, the table display case is suit-able as a sales counter and can be used directly at the point-of-sale as a bar dis-play case. This is even more useful with an added floor cabinet for added storage room.
PRODUCT DETAILS
Standard Sizes[B×H×D]
1020 × 970 × 520 mm1220 × 970 × 520 mm1520 × 970 × 520 mmHeight of the glass body 300 mmIndividual dimensions on request.
Lighting
Smooth sliding doors in circumferential guideprofiles. Security lock in the front area.
Opening
Individual LED-spots, placeable anywhere on thehorizontal stainless steel bar in the rear area of thedisplay case.Optional: LED-light rail or individual LED-spots.Various special solutions on request.
Eloxal- RAL- and other special colors of yourchoice. Floor cabinets, legs and base constructionsin many different versions with various surfacesand materials.
Alternative Options
INDOOR | PREMIUM
IV 361
36
VERTUM | PROFILE TECHNOLOGY DISPLAY CASES
IV 362
VERTUMWandvitrinen
Die Wandvitrinen aus der VERTUM-Serie übertragen die Designline in die Vertikale und werden üblicherweise eingesetzt, um kleinere und mittelgroße Objekte direkt in Augenhöhe des Betrachters an der Wand auszustellen. Die oft auch als Hänge-vitrinen bezeichneten Wandvitrinen mit einer typischen Tiefe von 250 mm werden dabei über Montageprofile oben und unten fest mit der Trägerwand verschraubt und sicher gehalten.
Die Vitrinen besitzen eine magnethaften-de Rückwand, an die ergänzende Plakate und Info-Aushänge mit Magneten ange-bracht werden können.
IV 372
37
PRODUCT DETAILS
Standard Sizes[B×H×D]
Lighting
Roller-mounted sliding door with aluminum guideprofiles. Pressure cylinder lock. Optional: centrally divided double-leaf revolvingdoors with security locks.
Opening
LED-spots in the top area of the display case. Optional: Height-adjustable LED-spots onvertical stainless steel bars.Various special solutions on request.
Eloxal- RAL- and other special colors of yourchoice. Fillings (side) in various designs, surfacesand materials.
Alternative Options
1020 × 1000 × 250 mm1220 × 1000 × 250 mm1520 × 1000 × 250 mm2020 × 1000 × 250 mmIndividual dimensions on request.
IV 371
INDOOR | PRIMUS
VERSUSCABINET SHOWCASES
The only 22mm wide and rounded pro-files of the VERSUS-series give the show-case a very slim and filigree look. It offers a width of 1,000 mm which is sufficient space for large exhibits and therefore marks the ideal solution if a great price pe r fo rmance ra t io i s des i r ed . Nevertheless, the showcase meet all requirements for a high quality and appealing object presentation.
As an alternative version, we offer the cabinet showcase with a lockable floor cabinet for additional storage space.
The showcases of the VERSUS-series are manufactured in larger quantities to ensure they are available immediately from stock at a low price. Alternative dimensions and surfaces are available on request for larger quantities.
PRODUCT DETAILS
Standard Sizes[B×H×D]
1000 × 2000 × 400 mm
Individual dimensions are available on requestfor quantities of about 10.
Opening
Two-leaf revolving door with bands at the topand the bottom.Security locks at the top and the bottom.
Opening
LED-spots in the top area of the showcase.Optional: Height-adjustable LED-spots onvertical stainless steel bars.Various special solutions on request.
Version with closed floor cabinet made of alight-gray laminate panel.Front with two sliding doors and a security lock.
Alternative Options
IV 381
38
VERSUS | PROFILE TECHNOLOGY DISPLAY CASES
IV 382
PRODUCT DETAILS
Standard Sizes[B×H×D]
400 × 2000 × 400 mm500 × 2000 × 500 mm600 × 2000 × 400 mmIndiv. dimensions o. request f. quantities about 10.
Lighting
Single-leaf revolving door with bands at thetop and the bottom.Security lock in the middle of the display case.
Opening
LED-spots in the top area of the display case.Optional: Height-adjustable LED-spots on verticalstainless steel bars.Various special solutions on request.
(none)Alternative Options
VERSUSPILLAR DISPLAY CASES
The VERSUS display case is one of the top sellers among our glass display cases. The slim pillar display case is perfect for presenting noble exhibits. It gives an excellent view from all angles, which is supported by the only 22 mm wide aluminum profile frame that allows for a great viewability.
Display cases of the VERSUS-series are manufactured in large quantities to ensure that they are available immedi-ately from stock. Alternative sizes and surfaces are possible on request for higher numbers of ordered display cases.
IV 392
39
IV 391
VERSUSBONNET DISPLAY CASES
The VERSUS bonnet display case is the perfect solution for the exhibition of a single object. Five equal-sized glass sur-faces and the only 22 mm wide profile frame with a closed substructure create a perfect stage to let a high-quality exhibit shine.
Display cases of the VERSUS-series are manufactured in larger quantities and are therefore avai lable from stock. Alternative sizes and surfaces are possible with large orders.
PRODUCT DETAILS
Standard Sizes[B×H×D]
400 × 1500 × 400 mmIndividuelle Maße sind ab Stückzahlen von ca. 10 auf Anfrage möglich.
Lighting
Single-leaf revolving door with bands at thetop and the bottom.Security lock in the lower area of the glass body.
Opening
Ohne BeleuchtungOptional: Einzel- oder Duo-Spot an senkrechterEdelstahlstange
Fillings of the base construction in various finishes,surfaces and materials.
Alternative Options
INDOOR | PRIMUS
IV 401
40
VERSUS | PROFILE TECHNOLOGY DISPLAY CASES
IV 402
VERSUSWALL DISPLAY CASES
The VERSUS wall display cases are made for presentations at the eye-level of the viewers. They offer great value for their price with an effective lighting via ceiling spotlights and smooth sliding doors.
They are manufactured in large numbers and therefore available from stock. Additional sizes and surfaces are available on request in larger quantities.
41
PRODUCT DETAILS
Standard Sizes[B×H×D]
1000 × 1000 × 250 mm
Individual dimensions are available on requestfor quantities of about 10.
Lighting
Two-leaf sliding door in circumferentialprofile guides.Security lock in the lower area.
Opening
LED-spots in the top area of the display case.Optional: height-adjustable LED-spots onvertical stainless steel bars.Various special solutions on request.
(none)Alternative Options
IV 411
KUBUS
KUBUS | DISPLAY CASE ELEMENTSINDOOR | PRIMUS
42
Never before was a display case
series as transformable as our
KUBUS-series. Two basic elements
can be combined to build a new
display case that can be changed or
replaced by other elements as often
as you would like. You can also
expand your exhibi t ion wi th
additional elements from a pillar
display case or an expensive
landscape of display cases. You get
all liberties in the design for living
rooms or exhibitions.
Our KUBUS products fulfil the same
high quality standards of all our
other products – safety glass, robust
fittings, and a safe locking technol-
ogy. The slim 22 mm aluminum
profile frame is screwed securely
with a concealed corner connector.
All outer glass surfaces consist of
ESG safety glass.
The elements CUBE and CUBOID
as well as most of the accessories
are usually available from stock.
With the use of KUBUS, you solve
your exhibition problems in a very
flexible way as soon as possible.
IV 421
KUBUS | CUBOIDKUBUS | CUBE
43
Cubic class display case element with 22 mm wide
aluminum profiles and ESG safety glass surfaces. A
single-leaf revolving door opens the cube and the
security lock can either be installed on the left or the right
side. Additionally, you can order a height-adjustable
glass floor, for example to help exhibiting smaller
objects.
PRODUCT DETAILS
Standard Sizes[B×H×D]
Lighting
Model CUBE:500 × 500 × 500 mmModel CUBOID:1000 × 500 × 500 mmIndividual dimensions are available on requestfor quantities of about 10.
No lighting.Various special solutions on request.
Model CUBE:Single-leaf revolving door with installed bandsat the top and the bottom.Security locks in the middle of the display case.Model CUBOID:Two-leaf revolving door with installed bands atthe top and the bottom.Security locks in the middle of the display case.
Opening
Cuboid glass display cases with ESG safety glass surfaces
on the outside, installed in a sturdy frame construction
made of 22 mm wide aluminum profiles. The display
case is openable with two revolving doors and the
security locks can either be installed on the top or the
bottom. Just like with the cube, you can order a height-
adjustable glass floor, for example to help exhibiting
smaller objects.
IV 432IV 431
IV 433
44
GALLERY | PROFILE TECHNOLOGY DISPLAY CASES
IV 441 IV 442
IV 444IV 443
IV 441 | Custom-made round pillar display case in the salesroom of a precious jeweler in Berlin.
IV 442 | Cabinet showcase in a special format in the Coffee Mill Museum in Wiernsheim.
IV 443 | Cabinet showcase with sliding doors for the exhibition of glass art objects in the Glass Museum Lauscha.
IV 444 + 451 | Corner display case, pillar display case and cabi-net showcase in the Empress Elisabeth Museum (Sisi Museum) in Pöcking.
IV 452 | Cabinet showcases with rounded profiles in the Dragon Museum in Lichtenfels.
45
IV 451
IV 452
46
GALLERY | PROFILE TECHNOLOGY DISPLAY CASES
IV 461 | Cabinet showcase in a triangular shape. Two
revolving doors open the showcase. Two vertical, height-
adjustable LED-spotlights for the illumination.
IV 462 | Sliding-door display case with an area lighting
in the head of the display case.
IV 463 | Classical sliding-door cabinet showcase with a
closed, flat base construction.
IV 475 | Display case with an angle toward the viewer for
books and documents.
IV 476 | Black-anodized cabinet showcase with a
vertical center profile for the glass shelves. Backlit,
individually designed area lighting in the head area of
the showcase.
IV 463
IV 461 IV 462
47
IV 475
IV 474
IV 471 IV 472 IV 473
IV 476
LIGHTING TECHNOLOGYINDOOR
Effective LED-Spots
We offer different LED-spots for a
brilliant lighting of exhibitions and
glass shelves in the display cases.
All systems are operated with low
voltage (SK III) and incl. transformer
ready to connect to the display
case. The models LST1 to LST4 are
kept by magnetics of vert ical
con tac t r a i l s and p laceab le
anywhere.
IV 483 + 484 | The LED-spotlight
LST2 uses a ball joint that is
connected to the magenta adapter.
It therefore has a wide range for
adjustments to fit your personal
needs. IV 485 + 486 | The lamp of the spot
LST3 can be swiveled 180° with a
tilting joint and ultimately be turned
360° with the freely rotatable
adapter.
System LST2 | IV 484
System LST1 | IV 482System LST1 | IV 481
System LST3 | IV 486System LST3 | IV 485
48
System LST2 | IV 483
IV 481 + 482 | Our design spot
LST1 combines a round lamp with
an angular magnet adapter. The
system can be rotated 360° and
swiveled 180°. Additionally, there
are different illuminations with
beam angles from 16° to 70° or
sculptured lenses with 48° + 19°
available. Colored- and scattered
f i l m s , a n t i - g l a r e t u b e s a n d
barndoors complete the LST1
sys tem for a h igh l y- e f fec t i ve
illumination of your exhibits.
IV 494 + 495 | As a low-cost
alternative we offer the model LST4
with LED-spotlights in the classical
low-voltage design. The chrome
plated magnet adapter holds a
rotatable and swiveling socket for
the possibility to insert a LED-spot
with a GY6.35 socket.
IV 496 | Pillar display cases and
cabinet showcases with stainless
steel bars as carrier system can use
the LED-spotlight LST5. It can be
mounted directly on the vertical
bars.
IV 491 | Our bonnet display cases
and table display cases benefit from
the LED-system LST6. The vertical
standing pil lars can either be
mounted as solo- or duo spots on
the floor of the display case. The
exhibit can therefore be illuminated
by multiple angles. The individual
spots can be rotated and tilted
f ree l y. IV 492 + 493 | The
crossbeam of the LST7 system can
be supplied with individual LED line
elements or with rotatable spots.
The traverse can be rotated along
the longitudinal axis, making it the
perfect solut ion for our table
display cases.
System LST11 | IV 495System LST10 | IV 494
System LST7 | IV 492System LST6 | IV 491
49
System LST7 | IV 493
System LST12 | IV 496
SHOWCASESINDOOR
50
IV 501
SHOWCASES
OVERVIEW
MOVEO
FORTIS
MOVEO-S
FORTIS-S
NEXUS
ARGUS
52
54
56
58
59
60
61
51
PREMIUM
PRIMUS
T h e P R E M I U M - s e r i e s i s
characterized by the fact that it
i s h i g h l y v a r i a b l e a n d
customizable. You have the
maximum freedom of design to
let us create a showcase that
fulfils every requirement you
may have.
With the showcase of the
PRIMUS-series, we offer you
inexpensive alternatives to our
PREMIUM products for a safe
p o s t e r d i s p l a y, w i t h o u t
sacrificing any of our high
quality standards.
The individual models are
available from stock in their
standard dimensions.
MOVEO
Standard versions:
15-208-27
MOVEO-S
LAGER8-27
FORTIS-S
LAGER8-27
SHOWCASESINDOOR
52
Options | Accessories:
xy FARBE LICHT
IV 521
IV 523IV 522
FORTIS
Standard versions: Options | Accessories:
15-208-27
xy FARBE LICHT
NEXUS
LAGER8-18
ARGUS
LAGER1-8
Symbol Explanation:
Rotary wing right
Freelyselectable color
Availablefrom stock
LAGER
FARBE
2-16
Freely selectabledimensions
Number A4 sheets
Sliding Door
LED-lighting
xy
LICHT
Aluminum profilerounded
Increasedfire protection
Ø LDelivery time inworking days
Rotary wing left
15-20
Aluminum profilesquare
53
IV 511
IV 513IV 512
SHOWCASESINDOOR | PREMIUM
MOVEO
The showcase MOVEO is part of the PREMIUM-series of our showcases for the interior. Thanks to non-combustible materials, MOVEO meets the highest fire safety require-ments and its generously rounded corners make it surpass the accident prevention regulations for use in schools. It is therefore usable in all kinds of public places.
MOVEO uses profiles with rounded edges that are safely connector with ball corner connectors.
The sliding doors use safely guided roller bearings. A pressure cylinder safety lock that is placed at the front locks the showcase.
54
KEY FACTS
× Showcase with rounded profiles and corner connectors
× Roller-bearing, smooth-running sliding doors
× ESG safety glass
× Meets all common fire protection and safety requirements
IV 541
IV 543IV 542
PRODUCT DETAILS VARIANTSSTANDARD
Housing depth [mm] 80 mm125 mm210 mm
Glazing
Surface
Lock system
Number A4 sheets W x H [mm]
ESG und VSG in various versionsanti-glare glassOptiWhite-Glass
individual closure systemaccording to the customer's requirements
single-frame safety glass / ESG
pressure-cylinder safety lockwith. 2 keys
8 × DIN A416 × DIN A421 × DIN A427 × DIN A4
color coating in RAL colorsspecial colors according to DB, NCS et al.eloxal colors of your choice
anodizing in matt silver (E6/EV1)
Lighting LED-lighting behind text panelno lighting
Opening –
• 955 × 720 mm • 1395 × 1030 mm • 1615 × 1030 mm • 2055 × 1030 mm
freestanding with legsinstallation in recesses
prepared for wall mounting,required material included
Rear panel coating in different colorsdifferent colors for use indoor / outdoor usebeige cork bulletin board
white, magnetic back wall with 10 magnets
Text panel unlabeled, white acrylic text panel (removable) black foil on white aperture • white fontthrough decoated, black adhesive foilgraphic logos in colors of your choice
none
two-leaf, sliding door mounted onroller bearings
50 mm
standard measurements from ca. 800 × 800 mm to about2.500 ×1.500 mm • individualmeasurements according tocustomer's requirements
Mounting type
55
SHOWCASESINDOOR | PREMIUM
56
FORTIS
FORTIS is our best-selling PREMIUM showcase for indoor use. It fulfils the highest fire protection requirements by using non-combustible materials. The housing corners and profile edges are rounded, making it fulfil the all valid accident prevention regulations for use in schools and daycares. FORTIS can therefore be used in all types of public buildings without any problem.
The showcase FORTIS has edged frame profiles which are assembled and crewed together safely with corner connectors.
The sliding doors use safely guided roller bearings. A pressure cylinder safety lock that is placed at the front locks the showcase.
KEY FACTS
× Showcase with angular profiles and housing-edges
× Roller-bearing, smooth-running sliding doors
× ESG safety glass
× Meets all common fire protection and safety requirements
IV 561
IV 563IV 562
PRODUCT DETAILS VARIANTSSTANDARD
Housing depth [mm] 210 mm
Glazing
Surface
Lock system
Number A4 sheets W x H [mm]
ESG und VSG in various versionsanti-glare glassOptiWhite-Glass
individual closure systemaccording to the customer's requirement
single-pane safety glass / ESG
pressure-cylinder safety lockwith 2 keys
8 × DIN A416 × DIN A421 × DIN A427 × DIN A4
color coating in RAL colorsspecial colors according to DB, NCS et al.eloxal colors of your choice
anodizing in matt silver (E6/EV1)
Lighting LED lights behind text panelnone
Opening –
• 930 × 695 mm • 1370 × 1010 mm • 1590 × 1010 mm • 2030 × 1010 mm
freestanding with legs made of aluminuminstallation in recesses
prepared for wall mounting, requiredmaterial included
Rear panel coating in different colorsdifferent colors for indoor/outdoor usebeige cork bulletin board
white, magnetic back wall with 10 magnets
Text panel unlabeled, white acrylic text panel (removable) black foil on white aperturewhite font through decoated, black adhesive foilgraphic logos in colors of your choice
none
two-leaf sliding door mounted onroller bearings
60 mm 80 mm
standard measurements from800 × 800 mm to about2.500 × 1.500 mm individual measurements accordingto customer's requirements
Mounting type
57
SHOWCASESINDOOR | PRIMUS
MOVEO-S
The rounded showcase MOVEO-S is a cost-effective variant for indoor use. Its smooth-running sliding doors made of ESG safety glass can be locked with a padlock.
PRODUCT DETAILS
Housing depth [mm] 50 mm
Glazing
Number A4 sheets W x H [mm]
Single-pane safety glass / ESG
without panel and lighting
Mounting type prepared for wall mounting,required material included
Opening 2-part sliding-door made of glass
Surface anoding in matt silver (E6/EV1)
Lighting / Text panel
Rear panel white, magnetic back wall with 10 magnets
Lock system safety lock with 2 keys
KEY FACTS
Ÿ Inexpensive showcase with rounded profile edges and corners
Ÿ ESG safety glass
Ÿ Two-part sliding door, guided in smooth running slide rails
× Immediately available from stock!
58
8 × DIN A416 × DIN A421 × DIN A427 × DIN A4
• 955 × 720 mm • 1395 × 1030 mm • 1615 × 1030 mm • 2055 × 1030 mm
IV 581
PRODUCT DETAILS
Housing depth [mm] 60 mm
Glazing
Number A4 sheets W x H [mm]
toughened safety glass / ESG
without panel and lighting
Mounting type prepared for wall mounting,required material included
Opening double-wing sliding door
Surface anoding in matt silver (E6/EV1)
Lighting / Text panel
Rear panel white, magnetic back wall with 10 magnets
Lock system safety lock with 2 keys
KEY FACTS
Ÿ Inexpensive showcase with angular profile edges and corners
Ÿ ESG safety glass
Ÿ Two-part sliding door, guided in smooth running slide rails
× Immediately available from stock!
FORTIS-S
FORTIS-S is our entry-level model for indoor showcases with large-sized sliding doors. Angular aluminum hollow-chamber profiles with internal corner connectors give this showcase a high stability while making it look very elegant.
59
8 × DIN A416 × DIN A421 × DIN A427 × DIN A4
• 930 × 695 mm • 1370 × 1010 mm • 1590 × 1010 mm • 2030 × 1010 mm
IV 591
SHOWCASESINDOOR | PRIMUS
60
NEXUS
NEXUS is our low-price product with sliding doors for indoor use. NEXUS is a great solut ion whenever a small construction depth is desired for an easy poster display.
PRODUCT DETAILS
Housing depth [mm] 30 mm
Glazing
Number A4 sheetsW x H [mm]
toughened safety glass / ESG
without panel and lighting
Mounting type prepared for wall mounting,required material included
Opening two-part sliding door
Surface painted in silver (RAL 9006)
Lighting / Text panel
Rear panel white, magnetic back wall with 10 magnets
Lock system safety lock with 2 keys
KEY FACTS
Ÿ Inexpensive flat showcase with a case depth of only 30 mm
Ÿ ESG safety glass
Ÿ Smooth-running two-part sliding door
× Immediately available from stock!
8 × DIN A412 × DIN A418 × DIN A4
• 925 × 665 mm • 925 × 975 mm • 1365 × 975 mm
IV 601
61
ARGUS
Our showcase ARGUS is a smaller alternative for indoor use. The cost-effective, only 22 mm flat design in combination with a frameless acrylic revolving door makes the ARGUS unbeatable if a poster display in a small format is desired.
PRODUCT DETAILS
Housing depth [mm] 25 mm
Glazing
Number A4 sheetsW x H [mm]
impact-resistant acrylic glass
no panel or frame
Mounting type prepared for wall mounting,required material included
Opening Frameless revolving door
Surface anodizing in matt silver (E6/EV1)
Lighting / Text panel
Rear panel white, magnetic back wall with 10 magnets
Lock system safety lock with. 2 keys
KEY FACTS
Ÿ Inexpensive flat showcase with a case depth of only 25 mm
Ÿ Ideal for the display of small posters
Ÿ One-part frameless revolving door with concealed bearings
× Immediately available from stock!
1 × DIN A42 × DIN A44 × DIN A48 × DIN A4
• 267 × 352 mm • 477 × 352 mm • 477 × 652 mm • 897 × 652 mm
IV 611
PARTITION WALLS & LIGHT BOXESINDOOR
DISKUS
The poster frame DISKUS allows a full-surface backlighting of an individually printed poster. By using a LED-light guide plate, your motive will be backlit over the entire area. This created presence, appearance and attention far outclasses a usual poster lighting, whether it's dark or not.
62
KEY FACTS
Ÿ Flat frame with only 34 mm case depth and <1 mm narrow view width
Ÿ Full-surface, brilliant backlighting with a LED-light guide plate
Ÿ Fast changes of posters
× We deliver a fitting poster in your design on request
PRODUCT DETAILS
Housing depth [mm] 34 mm
DIN-format measurementsW x H [mm]
Backlight with LED-light guide plate,including external transformer
Mounting type Prepared for wall mounting,with mounting material
Billposting
Can be used in portrait or landscapeformat, individual dimensions on request
Surface Anodizing in matt silver (E6/EV1)
Lighting
DIN A 1DIN A 0
CLP
• 886 × 637 mm • 1232 × 886 mm • 1795 × 1232 mm
White tension poster with circumferential,easy to remove attachmentOptional: delivery incl. finished printedtension poster in your design
IV 621 IV 621
APERUM
Our modular partition wall system APERUM stands out with its high variability in the composition of the individual elements. As a special highlight we offer a showcase module that you can use next to the actual poster display for the possibility of presenting additional exhibits.
63
Version WALL ELEMENTS Ÿ Full element W x H: 1000 x 1700 mm Half element W x H: 1000 x 1000 mm
Ÿ Magnetic wall, white coated beschichtetOptional: cork or textile covering
Ÿ Rounded aluminum profile frame, anodized in silver
Ÿ Integrated gallery-rail
KEY FACTS
Ÿ Modular and flexible expandable partition system
Ÿ Wall elements can be installed in any angle
Ÿ Freely selectable colors and surfaces of the wall elements
Ÿ Various mounting options with magnets, pin needles or per wire suspension
Version DISPLAY CASE ELEMENT Ÿ B×H×T: 1000 × 1000 × 210 mmOptional with a subelement 1000 × 700 mm
Ÿ Square profile frame, anodized in silverŸ ESG safety glassŸ Two-piece, roller-mounted sliding doorŸ Security lock with 2 keysŸ 2 glass shelves, continuously height-Adjustable
Version PILLARS Ÿ Height: 1850 mmŸ Round tube, light gray (RAL 7035) coated;
Additional colors on requestŸ Stable, round base plate
PRODUCT DETAILS
IV 631 IV 632
IV 471 | Rounded showcase with addi-tional brochure compartments.
IV 472 | Rounded showcase with a text panel and an additional glass shelve for the exhibition of objects.
IV 473 | Wall display case with closed parts on the side and a central profile for diving the glass floor.
IV 474 | Table display case with a square base and a closed socket.
IV 475 | Rounded sliding door showcase in a larger size than usual.
IV 642 IV 643
IV 641
64
GALLERY | WALL DISPLAY CASES
IV 471 | Rounded showcase with addi-tional brochure compartments.
IV 472 | Rounded showcase with a text panel and an additional glass shelve for the exhibition of objects.
IV 473 | Wall display case with closed parts on the side and a central profile for diving the glass floor.
IV 474 | Table display case with a square base and a closed socket.
IV 475 | Rounded sliding door showcase in a larger size than usual.
IV 653
IV 651 IV 652
IV 654 IV 653
65
e.VITRUMINDOOR
66
IV 661
e.VITRUM
PORTRAIT TOTEM
LANDSCAPE TOTEM
STOREFRONT TOTEM
STOREFRONT DISPLAY
CM-SOFTWARE
68
69
70
71
72
67
Enter the Digital World
The digitization of media portfolios through the use of HD-screens opens up completely new opportunities for companies to present their entire product portfolio directly at the point-of-sale. High quality monitors are integrated into an elegant totem. The glass front is ceramically printed and available in almost every color. The shining glass front gives the totem a very high-qual i ty appearance. An invisible locking system and concealed hinges complete the product. The totem is best used as a wayfinding system that is operated with a simple touch. It can therefore guide visitors in shopping malls, sports arenas, amusement parks and many other public places.
55 P 211
55 inch LCD
1080 × 1920 Pixel
681 × 1210 mm
MODELL
Panel
Resolution
Monitor visible dimension B×H
Brightness
ESG 6 mm - Optiwhite
861 × 1991 mm
Glass
700 nit
Dimensions B×H
INDOOR | PREMIUM
PORTRAIT | TOTEM
68
IV 681
LANDSCAPE | TOTEM
Start Conversations
Digital advertising can also just entertain and send the viewer on a journey through our world. Our technological possibilities become more efficient every day. A control system can lead us through shopping malls or present the newest products. Information can be accessed through a very simple touch operation.
55 L 211
55 Zoll LCD
1920 × 1080 Pixel
1210 × 681 mm
MODELL
Panel
Resolution
Monitor visible dimension W×H
Brightness
ESG 6 mm - Optiwhite
1390 × 1990 mm
Glass
700 nit
Dimensions W ×H
REFERENZ-BEISPIEL
IV 692 | LAUSANNE
69
IV 691
Double-Sided Storefront-Totem
e.VITRUM solutions for the storefront use inform your customers both before and in your sales rooms – directly at the POS.
An optional audio support increases the attention of the totem through integrated, concealed speakers.
Take advantage of the innovative possibilities to provide customers with audiovisual stimuli for your products or campaigns.
MODELL
Panel
Resolution
Monitor visible dimension W×H
Brightness
Temperature range
55 P 412
55 Zoll LCD
1080 × 1920 Pixel
681 × 1210 mm
0 bis +40 °C
750 × 2100 mm
1500 / 700 nit
Dimensions W×H
STOREFRONT | TOTEM
70
INDOOR | PREMIUM
IV 701
STOREFRONT | DISPLAY
Put a stop to bad pictures with unreadable contents. Enrich your shop window with appealing animations from your high-brightness displays. Current campaigns and special offers can be displayed in an eye-catching way. The extremely high-brightness and brilliance of the displays guarantee the perfect presentation of your advertising message even under bad conditions or direct sunlight!
Freestanding Storefront Displayfor Placement in the Shop Window
55 L 451 65 L 451MODELL
Panel
Resolution
Monitor visible dimension W×H
Brightness
Power consumption
55 Zoll LCD
1920 × 1080 Pixel
1210 × 681 mm
200 W (typ.) | 290 W (max.)
1240 × 710 × 90 mm
65 Zoll LCD
1920 × 1080 Pixel
1433 × 808 mm
4000 nit
510 W (typ.) | 740 W (max.)
844 × 1457 × 102 mm
3500 nit
Dimensions W×H
55 P 421 65 P 421
55 Zoll LCD
1080 × 1920 Pixel
681 × 1210 mm
200 W (typ.) | 290 W (max.)
710 × 1240 × 90 mm
65 Zoll LCD
1080 × 1920 Pixel
808 × 1433 mm
4000 nit
510 W (typ.) | 740 W (max.)
1457 × 844 × 102 mm
3500 nit
71
IV 712
IV 711
Our advanced, user-friendly content management software ST-CM7 is installed on our e.VITRUM outdoor and indoor series. The software allows the user to control and monitor their digital content. This allows you to coordinate and control all monitors with your individually created advertisements or information.
CONTROL YOUR SCREEN
KEY FACTS
Layouts of your choice
ST-CM7 allows you to design your layout completely on your own – but you can also use one of the predefined layouts for free. Individual layouts can be saved and edited at any time. The screen can be separated into any number of segments. All content can be displayed independently in empty areas. Each segment can show whatever you want – websites, videos, interactive elements or even mus ic v ideos wi th sound.There are no limits to your creativity!
Kreativität und Ideen sind hier keine Grenzen gesetzt!
Intuitive Operation
A major advantage of ST-CM7 is the simple and intuitive interface. The software will be extremely easy to pick up if you are comfortable with other windows programs.A quick familiarization guarantees immediate results!
Easy Maintenance and Installation
The installation of ST-CM7 software on computers takes less than 30 minutes. An installer supports you in integrating the software into your network. Upcoming updates and software upgrades can be run safely and without any complications.A safe system-integration and easy software updates!
Many Different Formats
You can put all common media formats into a playlist without any further work. Websites, flash files, all video- and picture formats are possible – even powerpoint presentations without a license.Immediately playable contents, without time-consuming conversion of formats!
Log Function
The software logs and stores all playout and status information of every point-of-visualization to use the data later on, e.g. for service operations.You can review data at any time!
®e.VITRUMCONTENT MANAGEMENT SOFTWARE
72
POINT OF VISUALISATION
SCREEN-MANAGER
PC
73
CATALOGALL CATALOGS
We will send you all print media upon request for free.
Fon: +49 521/ 977 04 - 0Fax: +49 521/ 977 04 - 44Mail: info@st-vitrinen.de
These and additional catalogs and flyers are available as PDF-files for download at:www.st-vitrinen.com/service
OUTDOORDISPLAY CASES
CLOCKS
VITRINEN
Vitrinen sind das Schaufenster der Welt
ST-VITRINEN TRAUTMANN
INFORMATION + WERBUNGIN PERFEKTEN SYSTEMEN
AUSSEN
Zeit ist das, was man an der Uhr abliest
ST-VITRINEN TRAUTMANN
UHREN
(Albert Einstein)
e.VITRUM
INNOVATION
Vitrinen sind das Schaufenster der Welt
ST-VITRINEN TRAUTMANN
I NNOV AT ION
INDOORDISPLAY CASES
MOBILITY
Information und Werbung in perfekten Systemen
ST-VITRINEN TRAUTMANN
MOBILITY
74
WERBEUHREN UNDGROSSUHREN-ANLAGEN
DIGITALE & ANALOGEFAHRGASTINFORMATION
The Whole World Behind Glass
ST-VITRINEN TRAUTMANN
EXHIBITION DISPLAY CASES,SHOWCASES ANDDIGITAL SIGNAGE SYSTEMS
INDOORDISPLAY CASES
EDITION 4.0| EDITION 4.0INNENVITRINEN
www.ST-VITRINEN.de
ST-Vitrinen TrautmannGmbH & Co. KG
+49 521 97704 - 0+49 521 97704-44info@st-vitrinen.de
Grafenheider Str. 10033729 Bielefeld
© 2018 - ST-VITRINEN
Tel:Fax:
Mail:
ST 81 ST 82
ST 84ST 83 ST 85
O U RP R O F I L E
We plan, develop and manufacture display cases, showcases and clock system for an extremely wide range of applications since 1969. Our innovative information systems are being developed by a network of partners, architects, our team of metalworkers, carpenters, locksmiths and many others. Our mission to only deliver the most high quality products possible, especially when it comes to the safety, usability and individualization.
ST 81Sheet-coil-machine
ST 82Profile warehouse II in the logistics center
ST 83Our truck fleet
ST 84Shipping area for display cases
ST 85Rod machining center
ST 86
Headquarters in Bielefeld
Front: administration & production halls
Back: logistics center & e.VITRUM production
ST 87
Plant II – Logistics CenterST 87
ST 86
IV 021
The Whole World Behind Glass
ST-VITRINEN TRAUTMANN
EXHIBITION DISPLAY CASES,SHOWCASES ANDDIGITAL SIGNAGE SYSTEMS
INDOORDISPLAY CASES
EDITION 4.0| EDITION 4.0INNENVITRINEN
www.ST-VITRINEN.de
ST-Vitrinen TrautmannGmbH & Co. KG
+49 521 97704 - 0+49 521 97704-44info@st-vitrinen.de
Grafenheider Str. 10033729 Bielefeld
© 2018 - ST-VITRINEN
Tel:Fax:
Mail:
ST 81 ST 82
ST 84ST 83 ST 85
O U RP R O F I L E
We plan, develop and manufacture display cases, showcases and clock system for an extremely wide range of applications since 1969. Our innovative information systems are being developed by a network of partners, architects, our team of metalworkers, carpenters, locksmiths and many others. Our mission to only deliver the most high quality products possible, especially when it comes to the safety, usability and individualization.
ST 81Sheet-coil-machine
ST 82Profile warehouse II in the logistics center
ST 83Our truck fleet
ST 84Shipping area for display cases
ST 85Rod machining center
ST 86
Headquarters in Bielefeld
Front: administration & production halls
Back: logistics center & e.VITRUM production
ST 87
Plant II – Logistics CenterST 87
ST 86
IV 021