Post on 30-Apr-2018
1
Horizontal CNC 2 Axis LatheModel : KLR 20
Technical Catalog
w w w . k e n t c n c . c o m
w w w . k e n t c n c . c o m
KLR 20
2
Swing Over Bed
Main Spindle Horsepower
455mm
Metric
15kW
17.91”
S.A.E.
20hp
Swing Over Saddle 260mm 10.23”
Maximum Turning Diameter 330mm 12.99”
Maximum TurningLength 600mm 23.62”
Standard Chuck Size 200mm 8”
Spindle Nose
Spindle Speed 4500rpm
Bed Slant Flat Bed
Controller Fanuc Oi-T Standard
A2-6
w w w . k e n t c n c . c o m
KLR 20
3
Z Axis Travel
X Axis Travel
Metric
625mm
170mm (135mm+35mm) TRW170mm (115mm+55mm) ATB
S.A.E.
24.61”
6.69” (5.31”+1.38”)6.69” (4.53”+2.16”)ATB
Z Axis Rapid
X Axis Rapid
20m/min
20m/min
787.4ipm
787.4ipm
Z Axis Accuracy
X Axis Accuracy
+/-0.005mm
+/-0.005mm
+/-0.0002”
+/-0.0002”
Z Axis Repeatability
X Axis Repeatability
+/-0.0025mm
+/-0.0025mm
+/-0.0001”
+/-0.0001”
w w w . k e n t c n c . c o m
KLR 20
4
Spindle MaximumCutting Torque
Spindle I.D.
Main Spindle Horsepower
Metric
247.0N*m
62mm
15kW
S.A.E.
183.3ft*lb
2.441”
20hp
Spindle Nose A2-6
Standard 4500rpm A2-6 Spindle Specifications
w w w . k e n t c n c . c o m
KLR 20
5
Clamping CylinderMake-Model #
Clamping CylinderPiston Stroke 22mm 0.866”
Autostrong- M1552
Max Clamping Cylin-der Rotating Speed 6200rpm
Length (Spindle Faceto Drawtube Advanced
Drawtube I.D.
Length (Spinde Faceto Drawtube Retract)
49.8mm
52mm
27.8mm
1.961”
2.047”
1.095”
Drawtube Thread(Chuck) M60x2.0
Drawtube Thread(Clamping Cyl) M60x2.0
Max Drawbar Force (Push/Pull) 60/57.8KN 13488/12933lbf
Standard 4500rpm A2-6 Spindle Clamping Cylinder Specifications
Max Operating Pressure 40.8 MPa 5920psi
Max Cylinder Leakage 3.9l/min 1.03gpm
w w w . k e n t c n c . c o m
KLR 20
6
Chuck ClampingDiameter Range
Chuck Diameter
Chuck JawStroke Range
Chuck ThroughHole Diameter
Metric
20-210mm
200mm
7.4mm
52mm
S.A.E.
0.787-8.268”
8”
0.291”
2.047”
Chuck ActuatorStroke Range
Chuck Make- Model # Autostrong- N-208-A6
16mm 0.630”
Max Clamping Force 91KN 20,457lbf
Standard 4500rpm A2-6 Spindle Chuck Specifications
w w w . k e n t c n c . c o m
KLR 20
7
Chuck Hard JawPart Number
Chuck Soft JawPart Number Autostrong- HC08 (Three Sets Standard)
Autostrong- HJ08 (One Set Standard)
Standard 4500rpm A2-6 Spindle Chuck Jaw Specifications
Jaw Seration Pitch 1.5 x 60 degrees
Counterbore M12
Jaw Seration Pitch 1.5 x 60 degrees
Counterbore M12
w w w . k e n t c n c . c o m
KLR 20
8
Coolant SystemPressure
Metric
7.0bar
S.A.E.
101.5psi
Radial Turning ToolSquare Shank Size
Axial Turning ToolSquare Shank Size
25mm
25mm
1.0”
1.0”
Turret Tool MaximumSwing Dia. Clearance
Boring/ Drilling ToolRound Shank Size
460.5mm
32mm
18.13”
1.25”
Turret 10 Station (Standard)
Turret Station to Station Index Time 0.4s
Standard 10 Station Turret Configuration
w w w . k e n t c n c . c o m
KLR 20
9
Part # Standard Quantity
Radial TurningTool Block Metric KLR20-10T-RTB-25LH Factory Order
Part # Standard Quantity
Axial TurningTool Block RH Metric KLR-20-10T-ATBRH-25 Factory Order
Radial TurningTool Block S.A.E. KLR20-10T-RTB-25.4LH Factory Order
Axial TurningTool Block RH S.A.E. KLR-20-10T-ATBRH-25.4 1
Standard 10 Station Turret Tooling Blocks
Max Height- Tool Tip to Wedge Clamp 32.25mm 1.270”
Note: All tool blocks are available in RH or LH Tool Configurations
w w w . k e n t c n c . c o m
KLR 20
10
Part # Standard Quantity
Through Coolant U-Drill Holder- Metric KLR-20-10T-UDH-32 Factory Order
Through Coolant U-Drill Holder- S.A.E. KLR-20-10T-UDH-31.75 1
Standard 10 Station Turret Tooling Blocks- Pressurised U-Drill Holder
U-Drill Bushing I.D. Sizes- Metric 8,10,12,18,20,25mm (Factory Order)
U-Drill Bushing I.D. Sizes- S.A.E. 3/8, 1/2, 5/8, 3/4, 1.0” (Quantity One of Each Standard)
w w w . k e n t c n c . c o m
KLR 20
11
Part # Standard Quantity
Boring Tool Block Metric KLR20-10T-BTB-32 Factory Order
Boring Tool Block S.A.E. KLR20-10T-BTB-31.75 1
Standard 10 Station Turret Tooling Blocks- Boring Bar Tool Block
Boring Tool Bushing I.D. Sizes- Metric 8,10,12,18,20,25mm (Factory Order)
Boring Tool Bushing I.D. Sizes- S.A.E. 3/8, 1/2, 5/8, 3/4, 1.0” (Quantity One of Each Standard)
w w w . k e n t c n c . c o m
KLR 20
12
Square Tool Shank Size
Metric
25.0mm
S.A.E.
1.0”
Max Height- Tool Tip to Wedge Clamp
Standard Machine Configuration
65.3mm
Factory Order
2.57”
Standard
Turret Tool MaximumSwing Dia. Clearance 460.5mm 18.13”
Standard 10 Station Turret Integrated Radial Tool Wedge Universal Clamping
w w w . k e n t c n c . c o m
KLR 20
13
Tailstock Quill Taper
Metric
70mm
S.A.E.
2.756”
Tailstock Body TravelType
Tailstock QuillTravel 150mm 5.906”
Tailstock Body Travel(Full Range) 400mm 15.748”
Tailstock QuillDiameter
MT-4
Manual Set
Standard Tailstock Configuration
w w w . k e n t c n c . c o m
KLR 20
14
Machine Width
Machine Weight
Machine Depth
Power Consumption
Machine Height
3.4m
Metric
3500kg
1.52m
25KVA
1.7m
132.94”
S.A.E.
7735lb
59.72”
67.17”
Standard Machine Layout- Right Hand Side Discharge Chip Conveyor
w w w . k e n t c n c . c o m
KLR 20
15
STANDARD FEATURESFanuc Oi-T Control with 8.4” LCD Color Monitor and Manual Guide OiPCMCIA Slot and USB PortFanuc Control Manuals on CD400 Registered Part Program StorageRS-232 InterfaceFour Spare M-CodesPanel Mount MPG HandleElectrical Cabinet Heat ExchangerAuto Lubrication SystemCoolant System (7bar/ 101.5psi)Chip Conveyor (Right Hand Discharge)Stack Light (Tri-Color)Machine Workzone LightAuto Power Off (M30) Chip CartAutostrong Clamping Cylinder with Drawtube PackageAutostrong Three Jaw Chuck with Hard and Soft JawsTool Block Package (S.A.E. Standard)Operator ManualFanuc Manuals2 Year Warranty on Fanuc Controller1 Year Warranty on Machine Mechanical Parts
AVAILABLE OPTIONSFanuc Data Server & EthernetFanuc Macro B with High Speed Skip FunctionFanuc Oi-TD 10.4” LCD Screen with Manual Guide IPanel Air Conditioner Auto-doorCoolant Pressure (20bar/ 290psi)Coolant Pressure (70bar/1000psi)4500rpm A2-6 Big Bore Spindle Package6000rpm A2-5 High Speed Spindle PackageManual TouchsetterChuck Air BlowBed Mounted Steady RestRobot InterfaceGantry InterfaceLight CurtainsRenishaw RMP40 Part ProbeMist Collector (Filtermist FX2000/ FX300)Transformer 30kVA(Multitap)CE SpecCSA SpecLinear ScalesParts Catcher (Standard)Parts Catcher with 3m Long Discharge Conveyor(LH Discharge) Rear Discharge Chip ConveyorBar Feeder I/F (Standard or Devicenet)Post Process Gage I/F
Standard CAD/ CAM Packages
HSM CAM Package for Solidworks• HSM CAM Package #1 (Solidworks Add-In) HSM Works 1) 3 Axis Milling 2) 3+2 Milling 3) Turning• HSM CAM Package #2 (Solidworks Add-In) HSM Works 1) 5 Axis Simutaneous Milling 2) Lathe Rotary Milling 3) 3 Axis Milling 4) 3+2 Milling 5) Turning• Packages are designed for versions Solidwork
2013 and greater.
HSM CAD/CAM Package for Inventor• HSM CAD/CAM Package #1 Autocad 2015 Inventor 2015 HSM Works 1) 3 Axis Milling 2) 3+2 Milling 3) Turning • HSM CAD CAM Package #2 Autocad 2015 Inventor 2015 HSM Works 1) 5 Axis Simutaneous Milling 2) Lathe Rotary Milling 3) 3 Axis Milling 4) 3+2 Milling 5) Turning
Gibbscam CAM System(Standard Available Package Modules)• 2 Axis Turning• 2.5 Axis Milling• 2.5D Solid Milling• 3 Axis Milling• 3D Solid Milling• 5 Axis Milling
w w w . k e n t c n c . c o m
KLR 20
16
USA
Option 1 Option 2 Option 3 Option 4 Option 5Capital Lease
Capital Lease
Capital Lease
Capital Lease
FMVOperating
LeaseTerm (Months) 36 48 60 72 36-72
Standard Lease Buyout (End of Term) $1.00 $1.00 $1.00 $1.00 FMV DefinedEnd of Term
3 Month Skip Available Available Available Available Available6 Month Skip Available Available Available Available AvailableFixed Rate Early Buyout Option N/A N/A N/A N/A N/AEarly Buyout Option Available Available Available Available Available
**Fair Market Value (FMV) residual is used on a true Operating Lease, offering the most flexibility. Customers can “expense” the monthly payments versus capitalize them. This is great for budget issues, bank covenants, short term contracts, cash flow and for those who want to stay ahead of the technology curve. At the end of the lease, customers can purchase the equipment for Fair Market Value, re-lease, turn the equipment back in for newer technology or walk-away. We’ve even built in a fixed buy-out option allowing them to purchase the equipment before the end of the contract if they know you’re going to keep it.
Other terms (12 to 84 months) and options (leases, loans, rentals, skips) available upon request and can be customized on a deal by deal basis. Easy application-only process up to $350,000 per lease schedule.
Canada
Option 1 Option 2 Option 3 Option 4Capital Lease Capital Lease Capital Lease FMV
OperatingLease
Term (Months) 36 48 60 36-60Standard Lease Buyout (End of Term) $10.00 $10.00 $10.00 FMV Defined
End of Term3 Month Skip Available Available Available Available6 Month Skip Available Available Available AvailableFixed Rate Early Buyout Option N/A N/A N/A N/AEarly Buyout Option Available Available Available Available
North American Kent CNC Leasing Options
17
Kent Industrial Mission Statement
The goal of Kent Industrial is to provide market competitive products and solutions to our customers through maintaining industry benchmarked quality, cost and delivery metrics. The goal for over 35 years in business, has been to maintain a high standard of service and support for our world wide customer base.
With over 10,000 machines running in the field today, Kent Industrial strives to continuously grow its technical resources, develop new products and expand its services that support the growth of industry moving toward the future of manufacturing.
Kent Industrial USA Inc.Corporate Headquarters1231 Edinger AvenueTustin, CA 92780 USATel: (714) 258-8526Fax: (714) 258-8530E-mail Inquiry:sales@kentcnc.comWebsite:www.kentcnc.comParts & Service: (800) 536-8872
Kent CNC - Precision Engineering Solutions Division37060 Garfield, Suite T4Clinton Township, MI 48036Tel: (313) 434-6642Fax: (714) 258-8530E-mail Inquiry:sales@pes.kentcnc.comWebsite:www.pes.kentcnc.comParts & Service: (800) 536-8872
Kent CNC - Precision Engineering Solutions Inc. (Canada)5775 Wayne StreetLaSalle, Ontario N9H 2M5Tel: (519) 566-2370Fax: (714) 258-8530E-mail Inquiry:sales@precision-machine.caWebsite:www.precision-machine.caParts & Service: (714) 258-8526
V2014.11
w w w . k e n t c n c . c o m
KLR 20
18
Spindle MaximumCutting Torque
Spindle I.D.
Main Spindle Horsepower
Metric
247.0N*m
76mm
15kW
S.A.E.
183.3ft*lb
2.992”
20hp
Spindle Nose A2-6
Spindle Option #1- 4500rpm A2-6 Big Bore Spindle Package
w w w . k e n t c n c . c o m
KLR 20
19
Clamping CylinderMake-Model #
Clamping CylinderPiston Stroke 25mm 0.984”
Autostrong- M1868
Max Clamping Cylin-der Rotating Speed 4700rpm
Length (Spindle Faceto Drawtube Advanced
Drawtube I.D.
Length (Spinde Faceto Drawtube Retract)
47mm
66mm
22mm
1.851”
2.598”
0.867”
Drawtube Thread(Chuck) M74x2.0
Drawtube Thread(Clamping Cyl) M75x2.0
Max Drawbar Force (Push/Pull) 74/73.5KN 16,635/16,523lbf
Spindle Option #1-4500rpm A2-6 Big Bore Clamping Cylinder Package
Max Operating Pressure 40.8 MPa 5920psi
Max Cylinder Leakage 4.2l/min 1.11*/gpm
w w w . k e n t c n c . c o m
KLR 20
20
Chuck ClampingDiameter Range
Chuck Diameter
Chuck JawStroke Range
Chuck ThroughHole Diameter
Metric
20-210mm
200mm
7.4mm
66mm
S.A.E.
0.787-8.268”
8”
0.291”
2.598”
Chuck ActuatorStroke Range
Chuck Make- Model # Autostrong- NB-208-A6
16mm 0.630”
Max Clamping Force 91KN 20,457lbf
Spindle Option #1-4500rpm A2-6 Big Bore Chuck Specifications
w w w . k e n t c n c . c o m
KLR 20
21
Chuck Hard JawPart Number
Chuck Soft JawPart Number Autostrong- HC08 (Three Sets Standard)
Autostrong- HJ08 (One Set Standard)
Spindle Option #1- 4500rpm A2-6 Big Bore Chuck Jaw Specifications
Jaw Seration Pitch 1.5 x 60 degrees
Counterbore M12
Jaw Seration Pitch 1.5 x 60 degrees
Counterbore M12
w w w . k e n t c n c . c o m
KLR 20
22
Spindle MaximumCutting Torque
Spindle I.D.
Main Spindle Horsepower
Metric
183.3N*m
55mm
15kW
S.A.E.
137.9ft*lb
2.165”
20hp
Spindle Nose A2-5
Spindle Option #2-6000rpm A2-5 High Speed Spindle Package
w w w . k e n t c n c . c o m
KLR 20
23
Clamping CylinderMake-Model #
Clamping CylinderPiston Stroke 15mm 0.591”
Autostrong- M1246
Max Clamping Cylin-der Rotating Speed 7000rpm
Length (Spindle Faceto Drawtube Advanced
Drawtube I.D.
Length (Spinde Faceto Drawtube Retract)
45mm
45mm
32.2mm
1.772”
1.772”
1.268”
Drawtube Thread(Chuck) M55x2.0
Drawtube Thread(Clamping Cyl) M55x2.0
Max Drawbar Force (Push/Pull) 38/33KN 8543/7419lbf
Spindle Option #2-6000rpm A2-5 High Speed Clamping Cylinder Package
Max Operating Pressure 40.8 MPa 5920psi
Max Cylinder Leakage 3.0l/min 0.7925gpm
w w w . k e n t c n c . c o m
KLR 20
24
Chuck ClampingDiameter Range
Chuck Diameter
Chuck JawStroke Range
Chuck ThroughHole Diameter
Metric
15-169mm
152.4mm
5.5mm
45mm
S.A.E.
0.591-6.654”
6”
0.217”
1.772”
Chuck ActuatorStroke Range
Chuck Make- Model # Autostrong- N-206-A5
12mm 0.472”
Max Clamping Force 57KN 12,814lbf
Spindle Option #2-6000rpm A2-5 High Speed Chuck Specifications
w w w . k e n t c n c . c o m
KLR 20
25
Chuck Hard JawPart Number
Chuck Soft JawPart Number Autostrong- HC06 (Three Sets Standard)
Autostrong- HJ06 (One Set Standard)
Spindle Option #2-6000rpm A2-5 High Speed Chuck Jaw Specifications
Jaw Seration Pitch 1.5 x 60 degrees
Counterbore M10
Jaw Seration Pitch 1.5 x 60 degrees
Counterbore M10
w w w . k e n t c n c . c o m
KLR 20
26
Coolant SystemPressure
Metric
15.8bar
S.A.E.
230psi
Radial Turning ToolSquare Shank Size
Axial Turning ToolSquare Shank Size
25mm
25mm
1.0”
1.0”
Turret Tool MaximumSwing Dia. Clearance
Boring/ Drilling ToolRound Shank Size
460.5mm
32mm
18.13”
1.25”
Turret 12 Station (Standard)
Turret Station to Station Index Time 0.4s
Optional 12 Station Turret Configuration
X Travel175mm (145mm+30mm) TRW175mm (150mm+25mm) ATB
6.89” (5.71”+1.18”) TRW6.89” (5.91”+0.98”) ATB
w w w . k e n t c n c . c o m
KLR 20
27
Part # Standard Quantity
Radial TurningTool Block Metric KLR20-12T-RTB-20LH Factory Order
Part # Standard Quantity
Axial TurningTool Block Metric KLR-20-12T-ATBRH-20RH Factory Order
Radial TurningTool Block S.A.E. KLR20-12T-RTB-19.05LH Factory Order
Axial TurningTool Block S.A.E. KLR-20-12T-ATBRH-19.05RH 1
Optional 12 Station Turret Tooling Blocks
Max Height- Tool Tip to Wedge Clamp 33.25mm 1.309”
Note: All tool blocks are available in RH or LH Tool Configurations
w w w . k e n t c n c . c o m
KLR 20
28
Part # Standard Quantity
Boring Tool Block Metric KLR20-10T-BTB-32 Factory Order
Part # Standard Quantity
Through Coolant U-Drill Holder- Metric KLR-20-10T-UDH-32 Factory Order
Boring Tool Block S.A.E. KLR20-10T-BTB-31.5 1
Through Coolant U-Drill Holder- S.A.E. KLR-20-10T-UDH-31.75 1
Optional 12 Station Turret Tooling Blocks
Boring Tool Bushing I.D. Sizes- Metric 8,10,12,18,20,25mm (Factory Order)
Boring Tool Bushing I.D. Sizes- S.A.E. 3/8, 1/2, 5/8, 3/4, 1.0” (Quantity One of Each Standard)
w w w . k e n t c n c . c o m
KLR 20
29
Square Tool Shank Size
Metric
20.0mm
S.A.E.
0.75”
Max Height- Tool Tip to Wedge Clamp
Standard Machine Configuration
85.25mm
Factory Order
3.36”
Standard
Turret Tool MaximumSwing Dia. Clearance 460.5mm 18.13”
Optional 12 Station Turret Integrated Radial Tool Wedge Universal Clamping
w w w . k e n t c n c . c o m
KLR 20
30
Machine Width
Machine Weight
Machine Depth
Power Consumption
Machine Height
2.8m
Metric
3500kg
2.3m
25KVA
1.7m
110.8”
S.A.E.
7735lb
90.04”
67.17”
Optional Machine Layout- Rear Chip Conveyor Discharge
w w w . k e n t c n c . c o m
KLR 20
31
System Width
System Depth
Edge Loader Model #
System Height
5.3m
Metric
1.51m
Rebel V65- Manual Bar Adjust (Spindle Length Loader)
1.7m
207.51”
S.A.E.
59.72”
67.17”
Optional Short Spindle Length Bar Loader Layout
Edge Loader Model # Rebel 80- Auto Bar Adjust (Spindle Length Loader)
w w w . k e n t c n c . c o m
KLR 20
32
System Width
System Depth
Edge Loader Model #
System Height
6.38m
Metric
1.51m
Patriot 551-6
1.7m
251.11”
S.A.E.
59.72”
67.17”
Optional 6’ Foot Bar Loader Layout
FMB Loader Model # FMB Turbo 5-55-6
w w w . k e n t c n c . c o m
KLR 20
33
System Width
System Depth
Edge Loader Model #
System Height
8.38m
Metric
1.51m
Patriot 551-12
1.7m
329.86”
S.A.E.
59.72”
67.17”
Optional 12’ Foot Bar Loader Layout
FMB Loader Model # FMB Turbo 5-55-12