Post on 14-Feb-2016
description
HomeEMC ComplianceEMC Compliance
systemssystemsEMC Pre-ComplianceEMC Pre-Compliance
systemssystems
EN seriesEN seriesDef StanDef Stan
FCCFCCAs/NzAs/Nz
IEC61000-4-seriesIEC61000-4-series IEC61000-3-2IEC61000-3-2IEC61000-3-3IEC61000-3-3
andand
All from the Experts at Laplace Instruments LtdAll from the Experts at Laplace Instruments Ltd
EmissionsEmissions ImmunityImmunity
andand RF monitorsRF monitorsand metersand meters
ICNIRPICNIRP
Harmonics & FlickerHarmonics & Flicker Safety at workSafety at work
SelectorMake emissions measurements to check emission compliance?
Test for susceptibility/immunity?
Test for Harmonics & Flicker compliance?
Looking for ancillaries such as reference sources, antennas, LISNs etc…..?
See the overview and selector chart
Or both?
RoutemapEMC Compliance Testing – the essential guide
Emissions Susceptibility (immunity) Harmonics & Flicker
Conducted Radiated
Appliance?EN55014
Luminaire?EN55015
OATS
RF Absorbing clamp
RF300 largeLoop antenna
LISN or PLIP
SA1000 (1GHz) or SA3000 (3GHz)
analyser
RF1000 (1GHz)or RF2000 (2GHz)or RF3000 (3GHz)
Synthesiser
RF11xx, RF12xx or RF13xxPower Amplifiers
AC2000 analyser
AC1000 clean Power source
RFIC-46
All EMC emissionstandards
If emissionsBroadband?
RF800 or RF910 or RF915
Pre-selector
ERS EmissionsReference Sources
All other EMC standards
RF600 and RF700Ambient filters
EUT size……… Large and small or Small?
CDNs
RF200, RF230 or CTS011miniature antenna
Anechoic chamber
RFP-04CE Field probe+fibre link option
IEC61000-3-2IEC61000-3-3
Laplace product
Information
Incl. in CLIENTS
Incl PC software
LETIS
SA1020 pre-ampRF100 probes
RFG- core system
Test cell Lc300/2 or Lc60030MHz – 3GHz
Camera& lighting
FilteredfeedsAnechoic
chamber
RF200RF230
antenna
Key
LETIS
ECOMPACT4Integrated test
system
CDNs
IEC61000-4-3 IEC61000-4-2,4,5,11 IEC61000-4-6 Radiated RF LF effects Conducted RF
ESD
Clamps
Loops
H & F
Now updated to the latest versions of the standards,
including IEC61000-4-7 and IEC61000-4-15
HARMONICS & FLICKER Compliant with:Compliant with:IEC61000-3-2IEC61000-3-2IEC61000-3-3IEC61000-3-3
AC1000A AC1000A Clean power source.Clean power source.
Provides up to 1kW (4A) of pure sineProvides up to 1kW (4A) of pure sinemains power.mains power.
Output harmonic content: <0.1% THDOutput harmonic content: <0.1% THD
AC2000A AC2000A Harmonic & Flicker analyser.Harmonic & Flicker analyser.
Features:Features:Automatic testingAutomatic testing
Automatic calculation of ‘variable’ limitsAutomatic calculation of ‘variable’ limitsSelf contained instrumentSelf contained instrument
PC interface includedPC interface included
Emission selectorEmissions…………
ConductedRadiated – test cell
Radiated – Antenna
Radiated – Reference sources
Radiated – Pre-amplifier
Radiated – Near field probes
??Radiated – Large Loop Antenna
oror
Emissions analyser
Conducted selectorConducted emissions
Analyser and software
LISNs
Voltage probes
SA1000-aEMC analysers and softwareHigh performance EMC analysers…….
SA1002…………9KHz – 1GHzSA3000…………9KHz – 3GHzCompliant detectors (Pk, QP and Average)Pre-loaded limits in software.All results in Windows environment.Easy to use…. USB interface to any PC
Input connects to any Laplace antenna or transducer.See also the RF910 and RF915 pre-selectors.
LISNs
Voltage probes
Pre-selector Antennas
Conducted Radiated
Test Cell
Reference sources
Cells
Select
Test cells
It does not get any easier than this………..
* Quick* Compact* Convenient
Radiated Emissions to 3GHzRadiated Immunity to 3GHz
Emissions
Immunityor
Two sizes:…….Lc300/2: up to 30cm cube EUT, benchtop modelLc600: up to 60cm cube EUT, floor standingBoth provide IEC61000-4-3 testing to over 10V/m
More details……
Lc300/2-outerAccess door open to EUT area
System configured with:•SA1000 emissions analyser •RF2000 synthesiser•RF1100 power amplifier•LETIS•RF1200 power amplifier
Lc300/2
More details……
Lc300/2-filterLc300/2
Filter connection plate to External services
Access door open to internal filter connections.Aperture (hidden) provides access to EUT volume
More details……
CellnotesAdvantages of test cells
•Eliminate ambient•Known calibration•Compact size•Ease of use•Located in your own lab.•Convenience•Not dependant on the weather!
Advantages specific to LaplaCell
•Smallest size•Better field uniformity
Test chamber option
GTEM field- poor uniformity
LaplaCell field- far better uniformity
•Impedance matched for better results•Free space impedance is 377ohm (Ideal)•GTEM cells are 50ohm systems•Laplacell features impedance conversion to 200ohm•Much closer to ideal
•Complies with IEC61000-4-20•Latest standard for the calibration of cells
•Built-in field sensor•Save cost and complexity
Test chamber
Power amplifier
Synthesiser/signal genny
Chamber
EUTAntenna
Field sensor (RFP-04CE)With RS232 fibre optic interface (PCLK)
System controller
Systemsoftware
Optional EUT monitoring
SwitchUnit
RF1000, RF2000 or RF3000 with –RH option (External sensor)
RF11xxRF12xx
orRF1300
LETIS
Fibre optic cable(FOLK)
Integrated system for immunity testing to IEC61000-4-3 in test chamber
RF200 andRF230 antennas
RF910Pre-selector units RF910 and RF915
As specified by CISPR16and recommended for conducted
emission measurements if the EUT produces broadband noise.
These pre-selectors effectively pre-filterthe incoming signal such that theanalyser input is not overloaded
by broadband energy.
Not required if EUT producesnarrowband noise.
RF910 covers band B (150KHz – 30MHz)RF915 covers bands A and B (9KHz – 30MHz)
Photo shows RF910 below SA1000 and PC
RF1000 or RF2000
ERSEmissions Reference Sources
EMC3.53.5GHz reference source.
Extremely compactOnly 12 x 7 x 14cm
10 or 50MHz spacing
Remote control option
ERS1GHz reference source
Fully traceable to NPL
2MHz spacing
Provides auto site calibration when used
with SA1002 orSA3000
These sources can be used to simply checkan established site prior to measurements,
orTo calibrate an unknown site.
Note that the dominant source of measurementuncertainty for radiated emissions is the test site!
AntennasAntennas A range of antennas to cover most requirements.
RF200Broadband antenna
30MHz – 1GHzStandard EMC antennaFor use on OATS or in
test chambers
ARA Active receive antennaCompact, but same sensitivity as
larger antenna
Very small! About the size of your hand. For use in confined spaces
RF300 Large loop antenna(Van Leen Loop)
To CISPR15
CTS011
TrifieldRF meters and detectors
T-MA-PPersonal RF hazard warning detector
Provides an audible warning if the RF field isclose to the ICNIRP recommended limits
Essential for all who work close to RF transmittersand cell base stations
TDM-200RF power density meter.
Internal antennaIdeal for RF signal strength field surveys.
0.5MHz to 3GHz
TBM-100 Broadband meterAn Electric field meter, Gaussmeter and
RF field strength meter all in one small unit.
Monitor and measure the field from AC power lines, video displays, ovens, LANs and mobile
phonesGaussmeter: 40Hz –500Hz
Electric field meter: 40Hz – 100KHz RF field meter: 100KHz – 2.5GHz
LISNLISNs and Voltage Probes
PLIP Voltage probeAs specified by CISPR16
For use when LISN is not appropriate.Includes opto-isolation and high voltage,
fused connecting clips
LISN - Line Impedance Stabilisation Network
Commercial range complies with CISPR16Def Stan, Mil Spec and CISPR25 versions also available
Up to 4 linesUp to 100A/phase
Commercial range includes transient limiters
Immunity selectorImmunity testing
IEC61000-4-2 ESD ONYX16 simulator
IEC61000-4-3 Radiated RF LaplaCell and ancillaries
IEC61000-4-4 EFT ECOMPACT4
IEC61000-4-5 Surge ECOMPACT4
IEC61000-4-6 Conducted RF RFIC46 system + CDNs
IEC61000-4-8 Power Mag. Field ECOMPACT4 (option)
IEC61000-4-9 Pulsed Mag. Field ECOMPACT4 (option)
IEC61000-4-11 Dips and Interrupts ECOMPACT4
ECOMPACT4Standard system
LaplaCellsystems
RFIC systems
RFI test-aRF Immunity test
USB
RF Power
RF level feedback
Any standard PC
RF1000, RF2000 or RF3000
RF1100 and/or RF1200 or RF1300EUT Feedback
IEC61000-4-3 requires EUT to be immersed in strong modulated RF fields over the range 80MHz – 1GHz, or higher!
The specified techniques are fully incorporated intoThe Laplace test system comprising a LaplaCell,
system controller and power amplifier.See CLIENTS for total automated solutions.
Note that these systems work equally well with testchambers (FAC or SAC or stirred mode).
RF100 & SA1020Pre-amp & near field probes
RF100 near field probe set
Essential tool for the location of emission sources and identification of emission
frequencies.
SA1020 Pre-amplifier
20dB gain, flat characteristic from9KHz to over 1GHz.
Internal PP3 battery provides 30hour run time.
CIT-10Compact Immunity
Test SystemModel RFIC46
Includes:Function generatorSignal GeneratorRF Millivoltmeter
RF power amplifierEUT monitoring
Feedback monitoring
Wide range ofoptional ‘Versatile’ and ‘Enhanced’
CDNs available
•PC Controlled via USB•Windows software included•100KHz – 300MHz (Exceeds requirements of the standard•25W power amplifier… more than enough for most applications•Totally integrated system… very quick Totally integrated system… very quick and easy to use.and easy to use.
IEC61000-4-6
CLIENTSCLIENTS Combined Low cost Immunity and EmissioNs Test Systems.
Any standard PC
SA1002or
SA3000
RF2000
RF1100
LETIS
RF1200
Emissions analyser
Immunity controller
30-1000MHz P.A.
System integrator
0.8-2GHz P.A.
System shown will provide automatedmeasurements of emissions and
RFI testing up to 2GHz.
The LETIS (Laplace EMC Test Integration System)provides all necessary interconnections and
switching under software control.
Power ampsRF Power Amplifiers
A range of RF power amplifers for use with test cells
RF1100 25W 30MHz to 1GHzRF1170 70W 30MHz to 1GHzRF1200 12W, 0.8GHz to 2GHzRF1240 40W, 0.8GHz to 2GHzRF1300 10W, 0.8GHz to 3GHz
These amplifiers will provide wellin excess of the required fields
for IEC61000-4-3 industrial standardsinside the LaplaCells
SynthesiserImmunity test controllers
These controllers will provide allcontrol and interface requirements for sophisticated immunity testing
to IEC61000-4-3.
RF1000, 30MHz – 1GHzRF2000, 30MHz – 2.2GHzRF3000, 30MHz – 3GHz
Functions:•Signal generation and control•Field strength level control•EUT monitoring•Windows interface via USB•Flexible test setup•Full recording and display of results•Serial interface for remote sensor
LetisLETIS Laplace EMC Test Integration System.
2
ManualRangeselect
RF connectionto cell
Power Laplace Instruments Ltd
LETIS - Laplace EMC Test Integration System Made in UK
To RF2000
RF1100 connections
RF1200 connectionsTo emissions
analyser
EMISSIONS IMMUNITY
Range 2
Range 1
1Auto
To Cell
Control
RF
To PC
RS232
USB
USB
LETIS acts as a PC controlled switching unit to automatically
route the signals between the cell, the power amplifiers and the
system controller.Avoids mistakes, saves time and
allows long term unattended operation.
SA1000-b
LISNs
Voltage probes
Pre-selector Antennas
Conducted Radiated
Test cell
Reference sources
EMC analysers and softwareHigh performance EMC analysers…….
SA1002…………9KHz – 1GHzSA3000…………9KHz – 3GHzCompliant detectors (Pk, QP and Average)Pre-loaded limits in software.All results in Windows environment.Easy to use…. Serial interface to any PC.
Input connects to any Laplace antenna or transducer.See also the RF910 and RF915 pre-selectors.
RFI test-bRF Immunity testIEC61000-4-3 requires EUT to be
immersed in strong modulated RF fields over the range 80MHz – 1GHz.
The specified techniques are fully incorporated intoThe Laplace test system comprising a LaplaCell,
system controller and power amplifier.See CLIENTS for total automated solutions.
Note that these systems work equally well with testchambers (FAC or SAC or stirred mode).
USB
RF Power
RF level feedback
Any standard PC
RF1000 or RF2000 or RF3000
RF1100 and/or RF1200 or RF1300EUT Feedback
LaplaceAbout Laplace….
Founded in 1988Specialises in EMC test equipmentNOT linked to any other companyCustomer base worldwideGlobal distributor networkOver 2000 EMC test systems in operationOver 50 LaplaCell systems sold.All main products and software developed in-houseWe ALWAYS support all our customers direct… regardless of age of system (and all free of charge!)Continuous development program… new hardware and software to match developments in standards
Join the experts!