Post on 09-Feb-2021
Hinged 42mm
All rights reserved.No part of this publication maybe reproduced, stored in a retrieval system or transmitted in any form or by any
means electronic, mechanical, photocopying, recording or otherwise, without prior permission of Gulf Extrusions.
08-2014-V.01
42mm HINGED SERIES
42 - D PROFILES
42 - E PROFILE LIST
42 - F ACCESSORIES
42 - G ASSEMBLY DRAWINGS
42 - H 3D SECTIONS
11 - 38
39 - 55
57 - 59
61 - 112
113 - 117
42 - A GULF EXTRUSIONS
42 - C INTRODUCTION TO THE SYSTEM
42 - B QUALITY AND CERTIFICATIONS
03
10
04 - 09
3
Gulf Extrusions Co. LLC, the flagship company of the Al Ghurair Group of Companies, was founded in 1978, Dubai, UAE where it has over the years earned the reputation known as one of the most innovative and reliable companies in the Middle East.
Located close to its raw material supplier Dubai Aluminium Company Ltd (DUBAL), the world’s largest single smelter site, Gulf Extrusions has become one of the largest extrusion plants in the region.
Gulf Extrusions quality products can be seen in many of today’s progressive structures. The company was formed with the sole purpose to meet the increasing demands for aluminium extrusions in domestic, regional and international markets.
Gulf Extrusions six presses and highly skilled workforce are able to produce 65,000 metric tonnes per annum with a rated capacity of 24,000 tonnes for powder coated finish, 6,000 tonnes for anodized finish and can offer more than 10,000 profile designs. These extrusions cover numerous industries ranging from architectural to transportation, engineering to structural sections, components for household items, HVAC and customized products.
During the progressive stages of Gulf Extrusions, from its inception to expansion, the company not only has acquired a majority share in the local market, it has also made its presence felt globally throughout the GCC countries, Indian sub -continent, South East Asia, Australia, Africa, Europe and Canada.
Our commitment and utmost priority is to provide customers with the finest quality of aluminium extrusions.
Gulf Extrusions looks ahead to inevitable challenges and product advancements of the new era.
GULFEXTRUSIONS
GULF EXTRUSIONS 42-A
44
QUALITY STANDARD & CERTIFICATIONS
Quality is an inseparable element of all activities carried out at Gulf Extrusions. Gulf Extrusions is dedicated to respond and deliver on time, high quality, tailor-made and cost effective products. The management and staff are committed to implement a comprehensive and integrated Quality Management System in accordance with the International Quality Standards of ISO 9001 and ISO 14001.
Anodizing Finish:
• BS EN 12373-1 2001 Clause 7 (BS:6161 Part 6)• BS:3987 Clause 2, 3, 5, 6• Appendix- A, B, C, D, E, F, G, H, J, K, L Minimum Film Thickness- 16 Microns
Powder Coated Finish:
• BS:6496 Clause: 10.4, 10.5, 10.6, 10.7 & 10.8• ISO 2360 / 2813 / 2409 / 2931• Minimum Film Thickness – 60 Microns
Extrusions Dimensions Tolerances:
• BS EN 755 - 9:2008 • BS EN 12020 - 2:2008• DIN 1748, DIN 17615• ASTM B221
INTERNATIONAL STANDARD COMPLIANCE
42-B
PRODUCT QUALITY CERTIFICATES
Qualicoat (European Powder Coaters Association):• A quality label for coating on metal for Architectural Applications• A product license under the control of EWAA (European Wrought Aluminium Association) in Zurich Switzerland
Qualanod (European Anodizers Association):• A quality label organization to guarantee high quality Aluminium Anodizing.• A product license under the control of EWAA (European Wrought Aluminum Association) in Zurich Switzerland
• SASO
• ESMA
Management:• ISO 9001 (Quality Management System)
• ISO/TS 16949:2009 (Management System)
Environment:• ISO 14001 (Environment Management System)
Membership in International Organization:• AAC member (Aluminium Anodizers Council - USA)• AEC member (Aluminum Extruders Council - USA)• DIN EN 15088
55
QUALITY STANDARD & CERTIFICATIONS
ALLOY 6005A
Element Minimum Maximum
Si 0.50 0.90
Fe - 0.35
Cu - 0.30
Mn - 0.50
Mg 0.40 0.70
Cr - 0.30
Zn - 0.20
Ti - 0.10
Other Each - 0.05
Other Total - 0.15
Aluminium Remainder
ALLOY 6063
Element Minimum Maximum
Si 0.20 0.60
Fe - 0.35
Cu - 0.10
Mn - 0.10
Mg 0.45 0.90
Cr - 0.10
Zn - 0.10
Ti - 0.10
Other Each - 0.05
Other Total - 0.15
Aluminium Remainder
ALLOY 6061
Element Minimum Maximum
Si 0.40 0.80
Fe - 0.70
Cu 0.15 0.40
Mn - 0.15
Mg 0.8 1.20
Cr 0.04 0.35
Zn - 0.25
Ti - 0.15
Other Each - 0.05
Other Total - 0.15
Aluminium Remainder
ALLOY 6060
Element Minimum Maximum
Si 0.30 0.60
Fe 0.10 0.30
Cu - 0.10
Mn - 0.10
Mg 0.35 0.60
Cr - 0.05
Zn - 0.15
Ti - 0.10
Other Each - 0.05
Other Total - 0.15
Aluminium Remainder
ALLOY 6082
Element Minimum Maximum
Si 0.70 1.30
Fe - 0.50
Cu - 0.10
Mn 0.40 1.00
Mg 0.60 1.20
Cr 0.04 0.15
Zn - 0.20
Ti - 0.10
Other Each - 0.05
Other Total - 0.15
Aluminium Remainder
CHEMICAL COMPOSTIONS
42-B
66
ANODIZING
A wide range of anodizing treatment options are possible for the aluminium profile sections of this system. The color choices from Gulf Extrusions range from Natural, Gold, and Bronze to Spectro colors (Red, Blue, Green, and Gray).
This surface treatment process involves first pre-treatment with scotch brite brushing for the unfinished profiles, and then subsequently fully immersing the aluminium profiles in an acidic electrolyte solution through which electric current is passed creating an anodic film on the profiles ranging from 5-30MICs.
The process is guaranteed and certified for use by QUALANOD - A quality label Organization to guarantee high quality aluminium anodizing and the company’s ISO 9001 certification.
QUALITY STANDARD & CERTIFICATIONS42-B
77
Authorization to use the quality sign
QUALITY STANDARD & CERTIFICATIONS 42-B
88
POWDER COATING
• Horizontal & Vertical Powder coating lines with an Annual Capacity of 24 000 MT Powder Coating BS: 6496 Clause: 10.4, 10.5, 10.6, 10.7, & 10.8 ISO 2360/2813/2409/2931 Minimum Film Thickness - 60 Microns
A wide choice of colors for powder coating can be used for the aluminium profile sections.
From Gulf Extrusions the following powder types are available
• Polyester Façade (PE-F)• Super Durable Façade (SDF) & Hyper Durable Façade (HDF) (Where SDF & HDF are equivalent to Poly-Vinyldine DiFluoride (PVDF) in terms of corrosion performance)• Anti Bacterial (recommended to be used in Hospitals)• Anti Static (recommended for laboratories, electronics assembly buildings) and Heat Resistant in nature.
This surface treatment process involves the following pre-treatment
1. Degreasing2. Washing3. Etching4. Washing5. Chromatising6. Double washing in dematerialized water
Once completed, powder is applied using an electrostatic spraying process with charged powder particles, followed by curing in an oven under a controlled temperature of 180-200C for paint polymerization where the paint layer is at least 60mic.
This whole process is certified for use from QUALICOAT - A quality label for coating on metal for Architectural Applications.
GUARANTEE PERIOD:10 years for PE-F Quality25 years for PE-SDF
QUALITY STANDARD & CERTIFICATIONS42-B
99
Authorization to use the quality sign
QUALITY STANDARD & CERTIFICATIONS 42-B
1010
INTRODUCTION TO THE SYSTEM
The 42 mm Gulf Ex. Hinged Series is a design concept to combine esthetics and performance. Full solution package is supported to fulfill the requirement to cover the needed applications. It is designed for heavy duty use according to the American National Standard. The results has been impressive.All profiles are available in all colors in order to meet today’s modern architectural requirements. For better performance of the System, Alignment cleats for the frame and the shutter are used.
Specially designed EPDM Gaskets are made available with the system to enhance the performance and create easy assembly. Other accessories such as rollers and handles come as part of the system.
Sections:The sections in Gulf Extrusions line are produced by extruding aluminum on a wide range of presses starting with 800 tons to 4400 tons press. They are made of aluminum alloys 6060,6063,6082 and 6005 according to British Standard Specification for extrusion Dimensions Tolerances BS EN 755-9:2008 and BS EN 12020-2:2008.
Frame:Strong cross section profiles of 42mm, a wide range of frames are available to suit most of the required application in the building codes.
Sash: Tubular straight, elegant and stylish of 42mm width. A wide range is available to cover all the needed applications and glass thicknesses.
Assembly:Assembly of the frames is done by 45° cut same as the sashes at a custom 45° cut. All of the mounting components are made of aluminum.
Glazing:Standard or isolating ranges from “6 to 24”mm maintained by two EPDM joint and bead clipped at a minimum height of 15 mm. Bead must be on the side of the installation. The System consists of a different frame and different sash profile that will be used on the four sides, where this systemprovides the options for inward and outward opening. The System covers arch shape , louvers and swing doors
INTRODUCTION TO THE SYSTEM42-C
1111
PROFILES
PROFILES 42-D
12
All dimensions in mmVisible area_ _ _ _ _
PROFILES42-D
Frame Profiles
13
All dimensions in mm _ _ _ _ _Visible area
PROFILES 42-D
Frame Profiles
14
All dimensions in mmVisible area_ _ _ _ _
PROFILES42-D
Frame Profiles
15
All dimensions in mm _ _ _ _ _Visible area
PROFILES 42-D
Frame Profiles
16
All dimensions in mmVisible area_ _ _ _ _
PROFILES42-D
Frame Profiles
17
All dimensions in mm _ _ _ _ _Visible area
PROFILES 42-D
Frame Profiles
18
All dimensions in mmVisible area_ _ _ _ _
PROFILES42-D
Frame Profiles
19
All dimensions in mm _ _ _ _ _Visible area
PROFILES 42-D
Frame Profiles
20
All dimensions in mmVisible area_ _ _ _ _
PROFILES42-D
Frame Profiles
21
All dimensions in mm _ _ _ _ _Visible area
PROFILES 42-D
Frame Profiles
22
All dimensions in mmVisible area_ _ _ _ _
PROFILES42-D
Frame Profiles
23
All dimensions in mm _ _ _ _ _Visible area
PROFILES 42-D
Frame Profiles
24
All dimensions in mmVisible area_ _ _ _ _
PROFILES42-D
Frame Profiles
25
All dimensions in mm _ _ _ _ _Visible area
PROFILES 42-D
Frame Profiles
26
All dimensions in mmVisible area_ _ _ _ _
PROFILES42-D
Intermediate Profiles
27
All dimensions in mm _ _ _ _ _Visible area
PROFILES 42-D
Intermediate Profiles
28
All dimensions in mmVisible area_ _ _ _ _
PROFILES42-D
Bottom Frame Profiles
29
All dimensions in mm _ _ _ _ _Visible area
PROFILES 42-D
Bottom Frame Profiles
30
All dimensions in mmVisible area_ _ _ _ _
PROFILES42-D
Swing Door Profiles
31
All dimensions in mm _ _ _ _ _Visible area
PROFILES 42-D
Sash Profiles
32
All dimensions in mmVisible area_ _ _ _ _
PROFILES42-D
Sash Profiles
33
All dimensions in mm _ _ _ _ _Visible area
PROFILES 42-D
T-Profiles
34
All dimensions in mmVisible area_ _ _ _ _
PROFILES42-D
T-Profiles
35
All dimensions in mm _ _ _ _ _Visible area
PROFILES 42-D
T-Profiles
36
All dimensions in mmVisible area_ _ _ _ _
PROFILES42-D
Frame Profiles
37
All dimensions in mm _ _ _ _ _Visible area
PROFILES 42-D
T-Profiles
38
All dimensions in mmVisible area_ _ _ _ _
PROFILES42-D
Complementary Profiles
3939
PROFILE LIST
PROFILE LIST 42-E
40
ProfileReference Profile Section Page
WeightKG/M
IXcm4
IYcm4
WXcm3
WYcm3
PROFILE LIST42-E
09861
10622
09503
10613
10163
09210
09054
0.503
0.509
0.523
0.590
0.615
0.720
0.829
5.548
5.490
5.562
3.417
6.720
7.560
8.824
3.709
2.431
1.871
6.405
4.650
5.209
5.658
2.405
2.525
2.633
1.052
2.90
3.216
3.939
1.002
0.841
0.736
2.860
1.279
1.453
1.642
12
13
13
12
12
12
13
41
ProfileReference Profile Section Page
WeightKG/M
IXcm4
IYcm4
WXcm3
WYcm3
PROFILE LIST 42-E
13351
10250
10912
21408
10230
10180
09057
1.009
0.554
0.446
0.432
0.485
0.525
0.525
11.761
6.174
1.578
1.072
4.781
4.906
5.237
10.203
4.472
4.290
4.324
1.160
1.375
1.277
2.621
2.591
0.628
0.620
2.031
2.101
2.235
4.415
1.247
1.720
1.818
0.659
0.740
0.702
13
14
14
15
15
14
14
42
ProfileReference Profile Section Page
WeightKG/M
IXcm4
IYcm4
WXcm3
WYcm3
PROFILE LIST42-E
09912
11057
12440
14488
12535
12885
12933
0.670
0.310
0.753
0.666
0.692
0.757
0.763
6.674
0.254
7.677
6.850
7.104
7.730
7.219
2.621
2.528
8.122
7.189
7.471
8.076
3.970
2.909
0.200
3.384
3.014
3.121
3.406
3.189
1.192
1.018
2.720
2.456
2.557
2.742
1.609
14
14
25
25
25
25
25
43
ProfileReference Profile Section Page
WeightKG/M
IXcm4
IYcm4
WXcm3
WYcm3
PROFILE LIST 42-E
12352
12298
12259
12159
13294
12044
11173
0.715
0.864
0.934
1.135
1.226
1.015
0.689
4.524
12.990
14.007
11.391
12.367
9.999
1.167
6.856
8.900
9.625
16.290
17.195
7.274
2.478
1.713
3.566
3.829
5.145
5.593
4.490
0.684
3.028
3.988
4.309
4.394
4.650
2.561
5.054
25
26
26
26
26
24
16
44
ProfileReference Profile Section Page
WeightKG/M
IXcm4
IYcm4
WXcm3
WYcm3
PROFILE LIST42-E
10772
09157
10373
09911
21046
10266
09515
0.782
1.369
1.043
1.153
1.196
0.867
0.970
1.301
8.821
5.053
6.50
9.073
4.887
9.454
33.479
101.0
67.501
64.673
67.462
4.026
46.954
0.740
2.121
1.289
1.801
2.111
1.277
1.90
6.309
14.184
9.547
10.751
10.945
6.710
7.731
19
22
22
21
21
19
20
45
ProfileReference Profile Section Page
WeightKG/M
IXcm4
IYcm4
WXcm3
WYcm3
PROFILE LIST 42-E
10838
11656
09053
10310
11693
10425
09907
1.236
0.783
1.116
1.362
0.736
0.704
0.808
11.907
3.628
8.170
10.644
3.393
4.298
5.592
60.118
32.206
50.654
60.339
28.307
21.097
23.069
2.427
1.048
1.962
2.581
0.978
1.134
1.422
10.049
5.712
9.083
10.746
5.206
4.418
5.274
20
19
18
18
16
16
15
46
ProfileReference Profile Section Page
WeightKG/M
IXcm4
IYcm4
WXcm3
WYcm3
PROFILE LIST42-E
09906
11026
10251
09555
14637
13035
12893
0.808
0.717
0.857
0.827
1.619
1.477
1.340
5.592
4.696
10.169
8.429
36.601
27.276
16.482
23.745
21.605
27.064
25.628
80.212
69.480
53.828
1.422
1.256
2.133
1.721
6.771
7.337
5.091
5.716
4.469
5.468
5.282
14.356
13.431
10.948
15
17
17
17
23
23
24
47
ProfileReference Profile Section Page
WeightKG/M
IXcm4
IYcm4
WXcm3
WYcm3
PROFILE LIST 42-E
13569
13610
12266
12302
12263
12112
12049
2.745
1.587
1.798
1.028
1.083
2.819
2.400
22.790
17.706
19.444
19.352
10.833
31.041
26.384
339.765
100.761
95.408
10.324
20.248
211.815
149.035
5.928
8.431
9.259
5.052
5.158
14.438
12.229
35.774
16.793
17.268
4.913
5.289
27.478
22.134
24
27
27
27
27
29
29
48
ProfileReference Profile Section Page
WeightKG/M
IXcm4
IYcm4
WXcm3
WYcm3
PROFILE LIST42-E
12797
12177
12441
12713
12059
12795
12261
1.929
1.922
1.488
1.599
1.275
0.937
0.836
21.893
20.570
16.737
17.289
12.370
9.992
8.196
121.231
80.988
62.108
62.562
22.569
18.139
9.469
10.094
9.471
7.654
7.916
5.607
4.477
3.903
18.152
14.208
11.246
11.310
5.659
47.246
3.717
29
28
28
30
30
30
30
49
ProfileReference Profile Section Page
WeightKG/M
IXcm4
IYcm4
WXcm3
WYcm3
PROFILE LIST 42-E
12042
12880
12048
12725
13944
12046
12542
1.128
1.250
0.982
0.861
0.772
0.800
0.723
12.259
12.378
10.076
10.249
9.370
7.340
6.820
21.866
12.787
11.053
9.008
8.117
3.193
2.824
5.837
5.894
4.798
3.153
2.882
3.495
3.247
5.466
3.934
3.40
4.290
3.864
1.382
1.255
32
31
31
31
31
32
32
50
ProfileReference Profile Section Page
WeightKG/M
IXcm4
IYcm4
WXcm3
WYcm3
PROFILE LIST42-E
12262
12297
13036
12540
12452
12050
12950
0.685
0.605
1.609
1.539
1.470
2.335
1.715
2.934
2.708
32.721
20.956
7.129
25.080
18.715
6.496
5.806
72.074
58.755
47.189
134.435
77.472
1.276
1.177
8.180
5.987
2.247
11.308
8.284
3.091
2.762
13.533
11.675
9.363
20.682
13.473
32
32
33
33
34
34
34
51
ProfileReference Profile Section Page
WeightKG/M
IXcm4
IYcm4
WXcm3
WYcm3
PROFILE LIST 42-E
12156
12541
12043
13945
12726
12051
12370
1.877
1.104
1.233
0.772
0.861
1.060
1.060
19.491
12.341
12.087
9.370
10.249
9.830
9.672
73.359
28.731
23.482
7.858
8.748
11.053
11.536
8.677
5.285
5.236
2.882
3.153
4.164
4.125
13.338
6.456
5.870
3.271
3.667
3.40
3.549
35
35
35
37
36
36
36
52
ProfileReference Profile Section Page
WeightKG/M
IXcm4
IYcm4
WXcm3
WYcm3
PROFILE LIST42-E
12881
12047
12260
12796
09269
09522
09504
1.395
0.800
0.780
0.605
0.445
0.234
0.249
19.491
3.193
3.008
2.711
3.451
0.041
0.202
5.507
0.528
1.070
0.731
73.359
7.037
6.330
8.677
1.382
1.308
1.179
1.404
0.103
0.204
13.338
2.907
2.611
2.230
3.485
0.685
0.472
36
37
37
37
32
31
38
53
ProfileReference Profile Section Page
WeightKG/M
IXcm4
IYcm4
WXcm3
WYcm3
PROFILE LIST 42-E
09056
09225
11358
09029
10078
09365
01026
0.290
0.165
0.138
0.450
0.345
1.280
0.723
0.217
0.138
0.111
6.240
--
--
--
0.796
0.123
0.060
2.435
--
--
--
0.219
0.147
0.130
1.772
--
--
--
0.523
0.125
0.122
1.309
--
--
--
38
38
38
38
38
38
38
54
ProfileReference Profile Section Page
WeightKG/M
IXcm4
IYcm4
WXcm3
WYcm3
PROFILE LIST42-E
09556
09869
21494
21008
14675
14673
14674
0.655
0.584
0.720
0.467
0.688
0.567
0.688
2.139
1.796
4.150
3.431
8.574
2.593
7.084
5.910
5.138
33.012
5.190
7.298
5.552
8.574
1.395
1.166
1.074
0.919
2.638
1.122
2.964
2.814
2.445
5.471
2.288
3.475
2.643
2.638
27
27
20
13
32
31
35
54
PROFILE LIST42-E
55
14672
12300
10524
11377
0.567
0.709
0.242
0.214
5.298
5.737
--
--
2.593
2.802
--
--
2.165
2.370
--
--
1.122
1.218
--
--
37
37
38
39
ProfileReference Profile Section Page
WeightKG/M
IXcm4
IYcm4
WXcm3
WYcm3
PROFILE LIST 42-E
5757
ACCESSORIES
42-FACCESSORIES
58
Gasket / AccessoriesReference Section Description Unit
ACCESSORIES42-F
Linear Meter
Linear Meter
Linear Meter
Linear Meter
Pieces
Pieces
Pieces
GE-G-007
GE-G-010
GE-1-42
BRUSH-4MM
SCR-60
SCR-45
SCR-32
FRONT GLAZING GASKETUSED WITH THE FRAME
& SASH PROFILE
GLAZING BEADGASKET
FRAME & SASHGASKET
4.0 MM NORMAL BRUSHFOR SWING DOOR
B 4.8 X 60 - DIN 7981-A2
B 4.2 X 45 - DIN 7981-A2
B 4.2 X 32 - DIN 7981-A2
59
Section Description UnitGasket / Accessories
Reference
ACCESSORIES 42-F
Pieces
Pieces
Pieces
Pieces
SUC-42
SUP-42
HI-42
HA-42
DRAINAGE VALVE
DEFLECTOR
HINGE
HANDLE
6161
ASSEMBLY DRAWINGS
ASSEMBLY DRAWINGS 42-G
62
ASSEMBLY DRAWINGS42-G
63
ASSEMBLY DRAWINGS 42-G
Bottom Door Section - Inward OpeningDetail - A
64
ASSEMBLY DRAWINGS42-G
Top Fixed Door SectionDetail - A1
65
ASSEMBLY DRAWINGS 42-G
Top Fixed / Opening Door Section-Inward OpeningDetail - A2
66
ASSEMBLY DRAWINGS42-G
Left Side Door Section-Inward OpeningDetail - A3
67
ASSEMBLY DRAWINGS 42-G
Right Side Door Section-Inward OpeningDetail - A4
68
ASSEMBLY DRAWINGS42-G
Left Fixed Door SectionDetail - A5
69
ASSEMBLY DRAWINGS 42-G
Right Fixed Door SectionDetail - A6
70
ASSEMBLY DRAWINGS42-G
71
ASSEMBLY DRAWINGS 42-G
Bottom Door Section-Outward OpeningDetail - B
72
ASSEMBLY DRAWINGS42-G
Top Door Section-Outward OpeningDetail - B1
73
ASSEMBLY DRAWINGS 42-G
Left Side Door Section-Outword OpeningDetail - B2
74
ASSEMBLY DRAWINGS42-G
Right Side Door Section-Outward OpeningDetail - B3
75
ASSEMBLY DRAWINGS 42-G
76
ASSEMBLY DRAWINGS42-G
Bottom Door Section-Inward OpeningDetail - C1
77
ASSEMBLY DRAWINGS 42-G
Bottom Door - Fixed Section-Inword OpeningDetail - C1
78
ASSEMBLY DRAWINGS42-G
T-Fixed Section-Inward OpeningDetail - C2
79
ASSEMBLY DRAWINGS 42-G
Top Door - Fixed Section-Inword OpeningDetail - C3
80
ASSEMBLY DRAWINGS42-G
80
Top Door - Open / Fixed Section-Inward OpeningDetail - C4
81
ASSEMBLY DRAWINGS 42-G
81
T-Top Fixed Section-Inword OpeningDetail - C5
82
ASSEMBLY DRAWINGS42-G
Left Side Fixed Section-Inward OpeningDetail - C6
83
ASSEMBLY DRAWINGS 42-G
Left Side Open / Fixed Section-Inword OpeningDetail - C7
84
ASSEMBLY DRAWINGS42-G
Double Leaf Section-Inward OpeningDetail - C8
85
ASSEMBLY DRAWINGS 42-G
Right Side Open / Fixed Section-Inword OpeningDetail - C9
Insu
late
d g
lass
thic
kne
ss 2
4mm
GE-G-010
GE-G-007
11358
15 Variable
Variable88
8050
3.8
50
42
GE-G-010
GE-G-007
11358
Variable 15
Variable
12725
GE-1-4201026 12156
GE-1-42
86
ASSEMBLY DRAWINGS42-G
Right Side Fixed Section-Inward OpeningDetail - C10
87
ASSEMBLY DRAWINGS 42-G
88
ASSEMBLY DRAWINGS42-G
Bottom Window Section-Outward OpeningDetail - D
89
ASSEMBLY DRAWINGS 42-G
Top Window - Open / Fixed Section-Outword OpeningDetail - D1
90
ASSEMBLY DRAWINGS42-G
Top Window - Fixed Section-Outward OpeningDetail - D2
91
ASSEMBLY DRAWINGS 42-G
Left Side Window / Fixed Section-Outword OpeningDetail - D3
92
ASSEMBLY DRAWINGS42-G
Right Side Window - Fixed Section-Outward OpeningDetail - D4
93
ASSEMBLY DRAWINGS 42-G
Left Side Window-Outword OpeningDetail - D5
94
ASSEMBLY DRAWINGS42-G
Right Side Window-Outward OpeningDetail - D6
95
ASSEMBLY DRAWINGS 42-G
96
ASSEMBLY DRAWINGS42-G
Bottom Window Section-Inward OpeningDetail - E
97
ASSEMBLY DRAWINGS 42-G
Top Window Section-Inword OpeningDetail - E1
98
ASSEMBLY DRAWINGS42-G
Left Side Window Section-Inward OpeningDetail - E2
99
ASSEMBLY DRAWINGS 42-G
Double Leaf Section-Inword OpeningDetail - E3
100
ASSEMBLY DRAWINGS42-G
Right Side Window Section-Inward OpeningDetail - E4
101
ASSEMBLY DRAWINGS 42-G
102
ASSEMBLY DRAWINGS42-G
Bottom Swing Door SectionDetail - F
103
ASSEMBLY DRAWINGS 42-G
Top Swing Door SectionDetail - F1
104
ASSEMBLY DRAWINGS42-G
Left Swing Door SectionDetail - F2
105
ASSEMBLY DRAWINGS 42-G
Double Leaf Swing Door SectionDetail - F3
106
ASSEMBLY DRAWINGS42-G
Right Swing Door SectionDetail - F4
107
ASSEMBLY DRAWINGS 42-G
108
ASSEMBLY DRAWINGS42-G42-G
108
Louver Door Bottom-Outward OpeningDetail - T
109
ASSEMBLY DRAWINGS 42-G
109
Louver Door Top-Outward OpeningDetail -T1
110
ASSEMBLY DRAWINGS42-G
Louver Door Left Side-Outward OpeningDetail - T2
111
ASSEMBLY DRAWINGS 42-G
Louver Door Right Side-Outward OpeningDetail - T3
112
ASSEMBLY DRAWINGS42-G
113113
3D SECTIONS 42-H
3D SECTIONS
114
3D SECTIONS42-H
115
3D SECTIONS 42-H
116
3D SECTIONS42-H
117
3D SECTIONS 42-H
All rights reserved.No part of this publication maybe reproduced, stored in a retrieval system or transmitted in any form or by any
means electronic, mechanical, photocopying, recording or otherwise, without prior permission of Gulf Extrusions.
P.O.Box-5598, Dubai, United Arab Emirates • Tel: +971 4 884 6146 • Fax: +971 4 884 6830 Email: mail@gulfex.com • Visit us at www.gulfex.com