Post on 18-May-2020
H igh tech thermoforming too ls
Shaping your every day needs...
Established in 1978 by people with
a true passion for mechanics, CNC is
today a global supplier of high-tech
thermoforming tools for the packaging
industry.
Continuous improvement of the quality
standards, innovation, reliability,
professional skills, consultancy and
service are the key factors of our success.
Working with dedication side by side to
our customers and suppliers gives us
the boost to produce the highest level
of product quality with a special regard
to production efficiency and costs
reduction.
Choosing CNC means to rely on a trustful
par tner, from the very first contact to the
final installation at site. The best care
for the details, and a prompt after sales
suppor t complete the scenario to make
the most efficient solution at hand reach.
T H E C O M P A N Y
Tools are specifically engineered
to meet the requirements, the
applications, and the mechanical
fittings of the different equipment
where they have to be installed.
Consolidated experience in design,
machine tooling, and a deep knowledge
of the proper ties of the materials used
for the construction of the different
par ts ensure that our customers are
given with reliable and long-lasting
products. High outputs can be achieved
thanks to the most accurate cooling
capacity combined with the correct
forming technology.
The tools are also manufactured to
grant minimal waste, and the optimal
material distribution. Changeover time
is kept as shor t as possible.
All tools are finely assembled and
controlled before they are delivered.
OUR MACHINE CENTERS:
Jig grinder:
• HAUSER S50
• Travel:X1200mm;Y:600mm;W:635mm
• HAUSER S45
• Travel:X700mm;Y:500mm;W:500mm
• HAUSER S35
• Travel:X500mm;Y:300mm;W:400mm
Milling center:
• 5axisDMU100(DMG)
• 5axisDMU65(DMG)
• WEMASVZP1600
• HERMLEC1200V
• DMC75Linear(DMG)
• DMC635V(DMG)
• DMF220Linear(DMG)
• ZPS
• WELE
5 axis Turning center:
DMG/MORISEIKICTXBETA1250
Wire-cutting EDM/Die-sinking EDM:
CHARMILLES
Tangential grinding machine:
FAVRETTO
DELTA
Measuring machine 3D
T H E C A P A B I L I T I E S
T H E R M O F O R M I N G
CNC manufacture and supply tools for
the production of disposable cups,
plates, trays, covers, and containers
with and without cover for gastronomy,
meat, fruit and vegetables, coffee cups.
• Forming and cutting in-place moulds
• Separate forming moulds and
cutting stations
• Forming with in-place steel rule
cutting moulds
• Separate forming moulds and
steel rule cutting stations
The materials commonly used are:
A-PET, PP, PS, OPS, expanded PS,
barrier materials (PP/EVOH/PP, PET/
EVOH/PE, others).
LONG DURATION
COMPLEX SHAPES
CUT ACCURACY
DIMENSIONAL PRECISION
C U T T I N G
CNC also design and manufacture
complete cutting stations to be
integrated in the FFS (Forming Filling
Sealing) packaging lines of the most
impor tant machinery manufactures
like illig, Gabler, Kiefel, Amut, WM, and
Irwin, just to name a few, and for the
final users.
CNC exper tise becomes evident when
it comes to precision engineering,
enabling us to offer tailored
solutions for tougher and thicker
materials, enhancing the quality
and the longevity of the tools.
The tolerance required in such
tools when cutting thermoformed
plastic films is extremely impor tant.
We therefore manufacture all of
our punch and die tools using
the latest CAD/CAM technology.
With the correct maintenance, all
CNC tools are guaranteed to run
in excess of 3 million cycles while
keeping the cut quality unaltered.
Moreover, the care used to assemble
the linear driving mechanisms, allows
to reduce the process forces and
wear to a minimum.
Special attention is finally dedicated
to the tools fitting, so to ensure
rapid change over operations in case
different products and formats are
processed in the same cutting station.
S T R I P P U N C H - A N D - D I E C U T T I N G
LONG DURATION
(3 MILLION CYCLES)
CUT GAP LESS THAN 5 μm
CNC manufacture blister formats for
the Pharmaceutical Industry. The
design of each cavity is optimised
around the thermoforming process
and the characteristics of the
different materials (Aclar, PVC, PVdC,
PP, PET, COC, etc.) to guarantee
an even distribution of the film,
which eventually results in a longer
preservation of the products.
CNC also supply Cold Forming tooling
for ALU/ALU blisters, which are fully
tested to make sure that pin holes,
micro channels or delamination
will not occur, so ensuring high
barrier performance o the blister
against moisture, oxygen and light.
B L I S T E R A N D D E E P T H E R M O F O R M I N G T O O L S
Mail and Web:
cnc.carpi@cnc-carpi.comwww.cnc-carpi.com
CNC s.r.l.Via Emilia Romagna, 7
41012 Carpi (Modena)
tel. +39 059 697746
fax +39 059 641797
P. IVA: 00759370364