Post on 19-Jun-2020
FFA2001FISH FRYER ANVIL - SINGLE PAN (ELEC)
SPECIFICATIONSOUTPUT: Approx 4kg french fries an hourPOWER: 2.5kWVOLTAGE: 230VVOLUME OF OIL: 5LtDIMENSIONS: 288 x 448 x 282mmWEIGHT: 9kgIDEAL FOR: Raw product
FRYERS - Table top
FEATURES• Specially designed tilt-up head for easy removal of oil tank to drain the oil• Microswitch disconnects power when element box is removed or tilted• Thermostatically controlled operating temperature range: 50°C - 190°C• Automatic safety cut-out to prevent oil flashing – manual resettable • Longer optimised heating element covers more surface area and prolongs oil life • The oil tank has slip-away handles for easy removal• Rugged Stainless Steel wire basket with insulated handle• Larger basket design promotes even cooking and better oil drainage • Recommended portion size 250g per 5Lt tank• Produced in South Africa using heavier gauged Stainless Steel• Available in Single or Double Pan for increased versatility
FFA2002FISH FRYER ANVIL - DOUBLE PAN (ELEC)
SPECIFICATIONS OUTPUT: Approx 8kg french fries an hourPOWER: 2 x 2.5kWVOLTAGE: 2 x 230VVOLUME OF OIL: 2 x 5LtDIMENSIONS: 573 x 448 x 282mmWEIGHT: 12kgIDEAL FOR: Raw product
OTHER ORDER CODESFFI0001FISH FRYER ANVIL - NIGHT COVER ONLY
FFI0150FISH FRYER ANVIL - INSERT 1/2 x 150mm
FFB2250FISH FRYER BASKET - SPARE BASKET - S/STEEL
NoteFFA2002 MUST BE CONNECTED TO 2 SEPARATE 16AMP PLUGS ON SEPARATE CIRCUITS
(Stainless Steel baskets included)
2 YEARLIMITED WARRANTY
227
Heating
FFA6003 FISH FRYER ANVIL - 1 x 10Lt - HIGH SPEED - 5.6kW - ELEC
SPECIFICATIONSOUTPUT: Approx 9kg french fries / hrPOWER: 5.6kWVOLTAGE: 230V - 2 phase - 50HzVOLUME OF OIL: 10LtDIMENSIONS: 390 x 531 x 460mmBOX DIMENSIONS: 400 x 550 x 470mmWEIGHT: 16kg
OTHER ORDER CODESFFB2250 FISH FRYER BASKET - SPARE BASKET - S/STEEL
FFA5001FISH FRYER ANVIL - FROZEN CHIP McCAINS - SINGLE - ELEC
SPECIFICATIONSOUTPUT: Approx 6kg french fries / hrPOWER: 3.4kW VOLTAGE: 230VVOLUME OF OIL: 5LtDIMENSIONS: 288 x 448 x 282mmWEIGHT: 9kgIDEAL FOR: Frozen products
OTHER ORDER CODESFFB2260FISH FRYER BASKET - McCAINS / ANVIL FRYER
FFI0001FISH FRYER ANVIL - NIGHT COVER ONLY
FRYERS - Table top
FEATURES• A unique unit developed by McCain and Anvil to produce a perfect
chip straight from the freezer to the plate• Specially designed tilt-up head for easy removal of oil tank to drain
the oil• Microswitch disconnects power when element box is removed or
tilted• Automatic safety cut-out to prevent oil flashing – manual resettable• Use with McCain frozen chips for best results• Fries frozen chips within 3 minutes* preventing oil saturation,
producing a crispier and tastier chip
• 3.4kW element reduces recovery time• Operating temperature range: 50°C -190°C• The oil tank has slip-away handles for easy removal• Rugged Stainless Steel wire basket with insulated handle• Larger basket design promotes even cooking and better oil drainage • Recommended portion size 300g per 5Lt tank
*Unit tested under controlled conditions. Variables may affect the outcome.
NoteMust be used on a dedicated 16amp plug point Stainless Steel basket included
HIGH SPEED FRYER - Table topFEATURES• Stainless Steel handle to hinge the element to 90° for easy cleaning• Hinged element safely locks into 90° position• Stainless Steel tank designed with surge area• 1/2” Valve for easy oil drainage• Thermostatically controlled with automatic safety cut-out to prevent
oil flashing
• Microswitch disconnects power when element is hinged up• Recommended portion size 500g• Ideal for fish and battered products• Adjustable feet for varied height preference or levelling• Operating temperature range: 50°C -190°C
(Stainless Steel basket included)
2 YEARLIMITED WARRANTY
228
Heating
FFA4110FISH FRYER ANVIL - SINGLE PAN - GAS
SPECIFICATIONS PRODUCTION OUTPUT: Approx 4kg french fries / hrOUTPUT: 13000 BTU (3.81kW)GAS: LPGVOLUME OF OIL: 10LtDIMENSIONS: 300 x 616 x 458mmWEIGHT: 18kgREGULATOR: Yes
OTHER ORDER CODESFFB2250 FISH FRYER BASKET - SPARE BASKET - S/STEEL
FFA4120FISH FRYER ANVIL - DOUBLE PAN - GAS
SPECIFICATIONSPRODUCTIONOUTPUT: Approx 8kg french fries / hrOUTPUT: 26000 BTU (7.62kW)GAS: LPGVOLUME OF OIL: 2 x 10LtDIMENSIONS: 608 x 616 x 458mmWEIGHT: 30kgREGULATOR: Yes
OTHER ORDER CODESFFB2250 FISH FRYER BASKET - SPARE BASKET - S/STEEL
GAS FRYERS - Table topFEATURES• Safety approved by LPG Safety Association of SA• Electric piezo starter• Stainless Steel construction for easy cleaning• Fully welded oil tank fitted with a safety interlocked drain valve
neatly fitted behind the door• Thermostatically controlled valve with integrated pilot burner
• Adjustable temperature range 66°C - 200°C• Flame failure safety cut-off valve• Comes complete with rugged Stainless Steel wire basket with
insulated handle• Designed for LPG gas• Adjustable feet for varied height preference or levelling
GAS FRYER - Table top
FEATURES• Safety approved by LPG Safety Association of SA• Automatic electric piezo starter• Stainless Steel construction for easy cleaning• Fully welded oil tank fitted with a safety interlocked drain valve neatly
fitted behind the door• Thermostatically controlled valve with integrated pilot burner
• Adjustable temperature range 66°C - 200°C• Flame failure safety cut-off valve• Comes complete with Rugged Stainless Steel wire basket with insulated
handle• Designed for LPG gas• Adjustable feet for varied height preference or levelling
(Stainless Steel basket included)
(Stainless Steel basket included)
2 YEARLIMITED WARRANTY
229
Heating
FFA2010FISH FRYER ANVIL - 2 x 10Lt - 16.5kW - ELEC
SPECIFICATIONSOUTPUT: Approx 40kg french fries / hrPOWER: 2 x 8.25kWVOLTAGE: 380V - 3 phase (Neutral and Earth)VOLUME OF OIL: 2 x 10LtDIMENSIONS: 510 x 660 x 1000mmWEIGHT: 45kg
FFA6210FISH FRYER ANVIL - 2 x 10Lt - 12kW - ELEC
SPECIFICATIONS OUTPUT: Approx 35kg french fries / hrPOWER: 2 x 6kWVOLTAGE: 380V - 3 phase (Neutral and Earth)VOLUME OF OIL: 2 x 10LtDIMENSIONS: 510 x 660 x 1000mmWEIGHT: 45kg
This unit is ideal for all fast food outlets that serve large volumes of fried food especially in remote regions
FLOOR STANDING FRYERS - Gas
FLOOR STANDING FRYERS - Electric
FFA3200FISH FRYER ANVIL - 1 x 20Lt - GAS
SPECIFICATIONSPRODUCTION OUTPUT: Approx 40kg french fries / hrOUTPUT: 90000 BTU (26.38kW)VOLUME OF OIL: 20LtDIMENSIONS: 400 x 760 x 1180mmWEIGHT: 70kgREGULATOR: No
OTHER ORDER CODESFFB3200 FISH FRYER BASKET - FOR FFA3200
Note Heavy duty gas products to be connected by an approved gas installer
FEATURES• 20Lt oil capacity for twin basket operation• Large surge area tank design• Large 40mm drain valve with extension tube• Cold zone design allows debris to collect in the bottom of the tank,
prolonging the oil life
• Temperature thermostatically controlled with safety cut-out to prevent oil flashing
• Flame failure safety cut-off valve• Manual Pilot Flame ignition• Rugged Stainless Steel wire basket with insulated handle• Adjustable feet for levelling• Operating temperature range: 50°C -190°C
FEATURES• Large surge area and effective cold zone• Stainless Steel tank• Supplied with one drain tank
• Temperature thermostatically controlled with safety cut-out to prevent oil flashing
• Adjustable feet for levelling• Large 40mm drain valve for fast effective draining• Operating temperature range: 50°C -190°C
OTHER ORDER CODESCBS2280 CHIPBASKET - 280 x 179 x 130mm (NO SIDE HOOKS)
ORA0002 OIL RECEIVER
(Basket included)
(Baskets sold separately)
2 YEARLIMITED WARRANTY
230
Heating
FFA1020FISH FRYER ANVIL - 1 x 20Lt - 16.5kW - ELEC
SPECIFICATIONSOUTPUT: Approx 40kg french fries / hrPOWER: 16.5kWVOLTAGE: 380V - 3 phase (Neutral and Earth)VOLUME OF OIL: 20LtDIMENSIONS: 510 x 660 x 1000mmWEIGHT: 45kg
FFA6120FISH FRYER ANVIL - 1 x 20Lt - 12kW - ELEC
SPECIFICATIONSOUTPUT: Approx 35kg french fries / hrPOWER: 12kWVOLTAGE: 380V - 3 phase (Neutral and Earth)VOLUME OF OIL: 20LtDIMENSIONS: 510 x 660 x 1000mmWEIGHT: 45kg
OTHER ORDER CODESCBS2280 CHIP BASKET - 280 x 179 x 130mm - NO SIDE HOOKS
ORA0001 OIL RECEIVER
FLOOR STANDING FRYERS - Electric
FEATURES• Front mounted controls ensure safe working practice. Main
terminals are situated behind the front access panel• These units are powered by Incoloy elements which ensure
consistent peak performance• Fitted with a 40mm diameter drain valve
• Temperature thermostatically controlled with safety cut-out to prevent oil flashing
• Supplied with one drain tank• Adjustable feet for levelling• Operating temperature range: 50°C -190°C
(Baskets sold separately)
2 YEARLIMITED WARRANTY
231
Heating
FFA2020FISH FRYER ANVIL - 2 x 20Lt - 33kW - ELEC
SPECIFICATIONSPRODUCTION OUTPUT: Approx 80kg french fries / hrPOWER: 2 x 16.5kWVOLTAGE: 380V - 3 phase (Neutral and Earth)VOLUME OF OIL: 2 x 20LtDIMENSIONS: 1012 x 660 x 1000mmWEIGHT: 90kg
FFA6220FISH FRYER ANVIL - 2 x 20Lt - 24kW -ELEC
SPECIFICATIONS PRODUCTION OUTPUT: Approx 70kg french fries / hrPOWER: 2 x 12kWVOLTAGE: 380V – 3 phase (Neutral and Earth)VOLUME OF OIL: 2 x 20LtDIMENSIONS: 1012 x 660 x 1000mmWEIGHT: 90kg
OTHER ORDER CODESCBS2280 CHIP BASKET- 280 x 179 x 130mm (NO SIDE HOOKS)
FFA1002FISH FRYER ANVIL - SPAZA
SPECIFICATIONS OUTPUT: Approx 10kg french fries / hrPOWER: 2 x 3.4kWVOLTAGE: 230V VOLUME OF OIL: 2 x 8LtDIMENSIONS: 813 x 628 x 1152mmWEIGHT: 55kgNOTE: Should be connected to 2 separate 16Amp plugs on separate circuits
OTHER ORDER CODESFFB2250 FISH FRYER BASKET - S/STEEL
FLOOR STANDING FRYERS - Electric
FEATURES• Large surge area and effective cold zone• High power for optimal recovery time• Unit supplied with one drain tank• Each tank is fitted with a manual reset safety thermostat• Temperature thermostatically controlled with safety cut-out to
prevent oil flashing
• Stainless Steel construction for easy cleaning• Reduce the risk of down time with 3 elements per tank (Unit will
function with reduced performance if an element fails) • Adjustable feet for levelling• Operating temperature range: 50°C -190°C
SPAZA FRYER - ElectricFEATURES• A powerful floor standing unit that is reliable and cost effective• Capacity of 16Lt • Each insert has a powerful 3.4kW element• There is an integrated splash back with basket hanger facility• Ideal for smaller catering organizations• Valve fitted for easy draining of oil• Supplied flat packed• Temperature thermostatically controlled with safety cut-out to prevent
oil flashing• Recommended portion size 350g• Operating temperature range: 50°C -190°C
(Baskets sold separately)
(Baskets sold separately)
2 YEARLIMITED WARRANTY
232
Heating
FEATURES• Fitted with incoloy element• Ideal for keeping product warm• The lamp illuminates product for enhanced presentation• Sloped drip tray makes serving easier and avoids damage to the
product being scooped out
CDA0001CHIP DUMP ANVIL
SPECIFICATIONS POWER: 0.9kWVOLTAGE: 230VDIMENSIONS: 340 x 630 x 489mmWEIGHT: 8kg
FEATURES• Robust incoloy heating element provides even heating• Lamp illuminates product for enhanced presentation• Storage racks for 3 x GN1/1 x 150mm inserts• Sloped drip tray makes serving easier and avoids damage to the
product being scooped out• Compliments Anvil floor standing fryer range
CDA2001CHIP DUMP ANVIL - FLOOR STANDING
SPECIFICATIONS POWER: 0.9kWVOLTAGE: 230VDIMENSIONS: 449 x 620 x 1288mm
(Inserts included)
FEATURES• Variable heat control for easy grilling of sausages• Dual control, allowing front 5 rollers or back 6 rollers to be used
independently, or all 11 rollers together• Fitted with a removable fat tray for easy cleaning
HDR1011HOT DOG ROLLER ANVIL - 11 ROLLER
SPECIFICATIONSVOLTAGE: 230V - 50HzPOWER: 0.9kWDIMENSIONS: 580 x 480 x 190mmWEIGHT: 18kg
HOT DOG ROLLER - 11 Roller
CHIP DUMP
CHIP DUMP - Floor standing
2 YEARLIMITED WARRANTY
233
Heating
DFA0001DOUGHNUT FRYER ANVIL
SPECIFICATIONS POWER: 2.4kW VOLTAGE: 230VVOLUME OF OIL: 6 - 8LtDIMENSIONS: 736 x 465 x 265mmWEIGHT: 11kg
DOUGHNUT FRYER - Electric
FEATURES• Start your own business selling vetkoek, koeksisters or doughnuts• • • • • Comes standard with Stainless Steel turning fork• Removable drip tray convenient for draining• Takes 6 - 8Lt cooking oil•
2 YEARLIMITED WARRANTY
234