Post on 21-Jul-2015
RTape has a new heat transfer solution that saves time andmoney...At an average of 220 working days a year and aburdened hourly shop rate of $75 per hour, your annualsavings amounts to more than $15,000.
"Flash pressing" RTape’s FlexCut Sticky LT ontocotton fabrics and cotton blends can reduce
printing time by almost half.
-When decorating a heat sensitive fabric, RTape’s FlexCutSticky LT (low temperature) is typically heat pressed at 235ーF (115ーC) for 17 seconds.-However, Flash pressing FlexCut Sticky LT onto regularcotton fabrics and cotton blends heat presses at atemperature of 320ーF (160ーC).-This reduces the pressing time to only 9 seconds - asavings of 8 seconds per piece.
Using RTape's FlexCut Sticky LT can savecompanies over $15,000 annually.
-Using the "!ash press" method saves 8 seconds per print.-Companies that press 400 garments a day end up savingan hour each day.-At an average of 220 working days a year and a burdenedhourly shop rate of $75 per hour, the company's annualsavings amounts to more than $15,000.
Companies interested in puttingFlexCut Sticky LT to the test can callRegional Supply at 801-262-6451, orget more information and/or samplesat www.rtape.com.