Post on 31-Mar-2021
Instruction ManualHigh-De�nition Link for EVO ID5,ID6 With OEM Touch
Release Date: 2018 – 07 - 15
5V USBPOWERHDMI IN NAVI IN UART
KEYPAD
DIP SW
ITCH D
EBU
G
POWER/CAN AV IN/OUT LVDS IN LVDS OUT IR OUTTOUCH
OUT
support@car-solutions.com car-solutions.com
car-s
olutio
ns.co
m
Contents
Car Compatibility Chart Precautions
Dimension & Exterior Components & Optional Parts
Body Connector specificationsBody Connector specifications
Full Installation Diagram
External Camera ScriptAround View Script
DIP Switch Settings
Control Some of Function of A-LINK by original buttons Activation by original buttons
DTV Connection Diagram
Settings HDMI, NAVIGATIONSettings HDMI
Settings REAR VIEWSettings REAR VIEWSettings AV1 (FRONT VIEW) (OEM Camera delay time setting)
Settings AV2 (DTV)Settings CUSTOM
Settings (How To Use KEYPAD)
support@car-solutions.com car-solutions.com
car-s
olutio
ns.co
m
Precautions
Device related You should check the names and colors of each wires exactly, before you connect the wires. ex) CAN HIGH: White wires / CAN LOW: Blue wires
The ‘POWER / CAN Cable’ should always be connected last and be disconnected first.
The 'Mode Switch' is an optional part to change modes forcibly without CAN-BUS. Generally, the CAN-BUS wires are connected for changing modes by original buttons.
When the reverse gear is not detected by CAN-BUS, the 'REVERSE 12V IN wire’ should be spliced with 1 2V power of reverse light.
HDMI Device-related HDMI mode accepts general-screen resolution of HDMI devices.
Generally, '5V 1A Power output(5V USB POWER)' is a standard voltage for charging smartphone. If you need higher voltage than 5V, you should add a separate power supply.
Navigation(GPS) box - related When you connect the power wires(B+, ACC) to the navigation(GPS) box, the ‘NAVI 12V OUT' wire supported by the device should be spliced with an ACC wire of navigation box.
The navigation box should be powered off before unplugging the HDMI cable.
support@car-solutions.com car-solutions.com
car-s
olutio
ns.co
m
- NBT EVO i-Drive6 OEM Touch2017 - X3 (G01)
- NBT EVO i-Drive6,i-Drive5 OEM Touch2017 - X5 (F15)
- NBT EVO i-Drive6,i-Drive5 OEM Touch2017 - X6 (F16)
Specific ModelsProductionYearCar Models
2016 BMW 7Series G102017 BMW 5Series G30
Car Compatibility Chart
2016 7Series G102017 5Series G30 2017 6Series G32
- NBT EVO i-Drive6 OEM Touch2017 - 5 Series (G30)
- NBT EVO i-Drive5,6 OEM Touch2016 - 7 Series (G11)
- NBT EVO i-Drive6 OEM Touch2017 - 6 Series (G32)
Specific ModelsProductionYearCar Models
2017 6Series F162017 X5 F152017 X3 G01
support@car-solutions.com car-solutions.com
car-s
olutio
ns.co
m
170mm
93mm
23mm
Dimension
Exterior
A HDMI INB 5V USB POWER
C NAVI IN
D UART
E POWER/CAN
F AV IN/OUT
H LVDS OUT
I IR OUT
J TOUCH OUT
K KEY PAD
L DIP SWITCH
G LVDS IN
A B C D
E
L
F G H I J K
car-solutions.com
car-s
olutio
ns.co
m
Components
Optional Parts (sold separately)
1. Quadlock Connector 3.LVDS Cable
6. Micro USB5. KEYPAD
2. Power Cable 4. AV Cable
4. IR Cable
Extend LVDS Cable
support@car-solutions.com car-solutions.com
car-s
olutio
ns.co
m
Body Connector speci�cations
1 BATTERY POWER INPUT12V(ACC) OUT3
5 CAN IN HIGH7 OMNI KEY
CAN OUT HIGH9
2 GROUND INPUTN.C.CAN IN LOW
CAN OUT LOW
468 IR10
LVDS OUTCABLE
IR CABLE AV CABLE
POWER / CANCABLE
POWER / CANAV IN/OUTLVDS OUT LVDS INTOUCH OUTIR INKEY PAD
BAT +
GN
D
12V OU
T
CAN
IN H
CAN
IN L
OM
NI KEY
IR
CAN
OU
T H
CAN
OU
T L
1 2 3 4 5 6 7 8 9 10
1000mm
300mm
150mm
300m
m
500mm
IR IN
IR IN
DVB-T IR
POWER / CAN CABLE1 POWER
SIGNAL23 GROUND4 OMNI KEY
CAN OUT HIGH56 GROUND7 DVB-T IR
IR CABLE
1 REAR CAMERA3 NAVI_IN_L5 AUX_OUT_R
2 NAVI_IN_R_GND4 NAVI_IN_L_GND6 AUX_OUT_R_GND
7 AUX_OUT_L 8 AUX_OUT_L_GND9 CAP_SCL11 CAP_SDA13 CAP_INT15 UART_TX
10 CAP_GND12 CAP_VDD_3.3V14 CAP_RST16 UART_GND
17 UART_RX 18 IR_IN19 DVB-T_IR 20 IR_GND21 DVD_IR 22 IR_POWER
AV CABLE
support@car-solutions.com car-solutions.com
car-s
olutio
ns.co
m
Body Connector speci�cations
HDMI DEVICE
Supports Only 720PDoes Not Supports 4K, 1080P,
Compatibility Resolution
NAVI IN UART5V POWER
HDMI IN
NAVI DEVICE (4CH LVDS)
A-LINK (Android Box)N-LINK II (Gps Box *Only Korea)
support@car-solutions.com car-solutions.com
car-s
olutio
ns.co
m
The sounds is automatically switched (HDMI,NAVI.DVB-T)
NAVI IN LNAVI IN R
AUX OUT LAUX OUT R
AUX IN
A-LINK (Android Box)N-LINK (GPS BOX)
NAVI DEVICE (4CH LVDS)
A-LINK (Android Box)N-LINK II (Gps Box *Only Korea)
HDMI DEVICE
Supports Only 720PDoes Not Supports 4K, 1080P,
Compatibility Resolution
OEM SCREEN
KEYPADIt’s only for Setting menu
DVB-TV IR
Navi Device※N-LINK , A-LINK do not need to connect
DOWN UP SEL MANU
ProvidedLVDS Cable
OEM LVDS Cable
Touch CableSpec
PIN 1PIN 2PIN 3 Green
WhiteBlack
PIN 4 RED
XYXY
Full Installation Diagram
OMNI KEY
12V OUT
DVBT AUDIO IN LDVBT AUDIO RDVBT IN VIDOE
FRONT IN
REAR IN
AV DEVICE
FRONT CAMERA
AV IN 1 CABLE
REAR CAMERA
IR INIR IN
DVB-T IR
ExtendHDMI LINK
OEM Quadlock Connector
NBT EVO Head Unit
※ When installing the interface for the first time,press OPTION button for more than 10 seconds to initialize it.
car-solutions.com
car-s
olutio
ns.co
m
DIP Switch Settings
OFF
ONOFF : ON :
ON (▼)
HDMI Mode Skip HDMI Mode
PIN OFF(▲)
1
Navigation Mode Skip Navigation Mode2
External Rear View Camera Original Rear View Mode3External Front ViewCamera(AV1 Mode)
Skip External Front ViewCamera(AV1 Mode)4
AV2 Mode Skip AV2 Mode5
Selection of car model
6789
10
No.6 No.7 No.8 Car ModelNo.9
OFF (▲) OFF (▲) OFF (▲)
2017~ BMW 5(G30) 10.25inch2017~ BMW 6(G32) 10.25inch
OFF (▲) OFF (▲)
2017~ BMW X5 (F15) 10.25inch2017~ BMW X6 (F16) 10.25inch
2016~ BMW 7(G11) 10.25inch2016~ BMW X3(G01) 10.25inch
No.10
support@car-solutions.com car-solutions.com
car-s
olutio
ns.co
m
Activation by original buttons
MENU
1 ChangingModes Press the button 2 seconds Order : HDMI → HDMI2 → HDMI3
→ NAVI → DVB-T →DVD → OEM
i-DriveButtons
ChangingModes Press the button short time Return to the OEM mode in any modes.
Button Function Operation Remarks
FULL6:4 PIP4:6 PIP
- 6(HDMI, NAVI) : 4(OEM)- 4(OEM : 6(HDMI, NAVI)
- Full size modeMove the Upwards2 secondsDIAL UP
2
ChangingModes
Move the downwards2 seconds Order : AV1 (Front View Camera)
DIAL DOWN
3
BACK
PowerReset
Press the button 10 seconds You can use this function when you get in trouble4
Reset tofactory default
setting andpower.
Press the button 10 seconds You can use this function when you get in trouble
OPTION
5
Omni ViewMode
(KOREA Spec)Press the button Change the Omni View Mode
Always it need to activation by button for using it function.(When you power off. It functions will be OFF) Default : OFF
OPTION
5
V I M Move the Upwards5 secondsDIAL UP
2
Return to the OEM mode in any modes.
Return to the OEM mode in any modes.
ChangingModes
Press the button short time
When it function activate automatically
6
PARKING
Order : HDMI → HDMI2 → HDMI3 → NAVI → DVB-T →DVD → OEM
ChangingModes
Press the button short time7
1
2
3
4
5
6
7
※ When installing the interface for the first time,press OPTION button for more than 10 seconds to initialize it.support@car-solutions.com car-solutions.com
car-s
olutio
ns.co
m
Control Some Functions by original buttons
3
32
2
4
5
1
1
5
41
3
※ Some applications might not be able to operate with i-Drive button.
Back to previous menuwhen press the button short.BACK
4 Press the button short time
Back to Home Main screenOPTION
5 Press the button short time
Move Left,Right1 Turn the Dial
Move Up,Down2 Move the dial up or down
Next page, Previous page3 Move the dial left or right
Button Function Operation
support@car-solutions.com car-solutions.com
car-s
olutio
ns.co
m
External Camera Script
HDMI 1
HDMI 2
HDMI 3
NAVIGATION
REAR VIEW
FRONT VIEW
CVBS 1 - DVBT
CVBS 2 - DVD
CUSTOM
EXIT
DIP SWITCH INFO : FIRMWARE DATE : 2018-03-02MAIN :2018-03-02SUB :2018-03-02TW23 :
128
AVM KEEPING TIME R → D 7 Sec
AVM KEEPING TIME P → D 7 Sec
PGS ON / OFF OFF
ADJUST - HORIZONTAL 128
INPUT SOURCE EXTERNAL CAMERA
BRIGHT 128
CONTRAST RED 128
CONTRAST GREEN 128
CONTRAST BLUE
ADJUST - VERTICAL 128When you shift gear reverse It screen will be working to PIP <Left :External Camera> <Right : OEM PDC Sensor>
How to setting
OEM PDCExternal Camera
If it connected 12V to 'REVERSE 12V IN wire"The screen will be change to “External Camera mode”
<PIP Size> <Full Size>
OEM PDCExternal Camera
OEM PDCExternal Camera
External Camera
<AV Cable>
12V IN
support@car-solutions.com car-solutions.com
car-s
olutio
ns.co
m
OEM Rear CameraOriginal ScreenAround View Script
2018-03-02MAIN :2018-03-02SUB :2018-03-02TW23 :
2018-03-02MAIN :2018-03-02SUB :2018-03-02TW23 :
2018-03-02MAIN :2018-03-02SUB :2018-03-02TW23 :
HDMI 1
HDMI 2
HDMI 3
NAVIGATION
REAR VIEW
FRONT VIEW
CVBS 1 - DVBT
CVBS 2 - DVD
CUSTOM
EXIT
DIP SWITCH INFO : FIRMWARE DATE :
128
AVM KEEPING TIME R → D 7 Sec
AVM KEEPING TIME P → D 7 Sec
PGS ON / OFF OFF
ADJUST - HORIZONTAL 128
INPUT SOURCE AVM ( AROUND VIEW)
BRIGHT 128
CONTRAST RED 128
CONTRAST GREEN 128
CONTRAST BLUE
ADJUST - VERTICAL 128
IW-BMW-EVO-N23
How to setting
HDMI 1
HDMI 2
HDMI 3
NAVIGATION
REAR VIEW
FRONT VIEW
CVBS 1 - DVBT
CVBS 2 - DVD
CUSTOM
EXIT
DIP SWITCH INFO : FIRMWARE DATE :
128
AVM KEEPING TIME R → D 7 Sec
AVM KEEPING TIME P → D 7 Sec
PGS ON / OFF OFF
ADJUST - HORIZONTAL 128
INPUT SOURCE AVM ( AROUND VIEW)
BRIGHT 128
CONTRAST RED 128
CONTRAST GREEN 128
CONTRAST BLUE
ADJUST - VERTICAL 128
IW-BMW-EVO-N23
HDMI 1
HDMI 2
HDMI 3
NAVIGATION
REAR VIEW
FRONT VIEW
CVBS 1 - DVBT
CVBS 2 - DVD
CUSTOM
EXIT
DIP SWITCH INFO : FIRMWARE DATE :
128
AVM KEEPING TIME R → D 7 Sec
AVM KEEPING TIME P → D 7 Sec
PGS ON / OFF OFF
ADJUST - HORIZONTAL 128
INPUT SOURCE AVM ( AROUND VIEW)
BRIGHT 128
CONTRAST RED 128
CONTRAST GREEN 128
CONTRAST BLUE
ADJUST - VERTICAL 128
IW-BMW-EVO-N23
HDMI 1
HDMI 2
HDMI 3
NAVIGATION
REAR VIEW
FRONT VIEW
CVBS 1 - DVBT
CVBS 2 - DVD
CUSTOM
EXIT
DIP SWITCH INFO : FIRMWARE DATE : 2018-03-02MAIN :2018-03-02SUB :2018-03-02TW23 :
128
AVM KEEPING TIME R → D 7 Sec
AVM KEEPING TIME P → D 7 Sec
PGS ON / OFF OFF
ADJUST - HORIZONTAL 128
INPUT SOURCE AVM ( AROUND VIEW)
BRIGHT 128
CONTRAST RED 128
CONTRAST GREEN 128
CONTRAST BLUE
ADJUST - VERTICAL 128
IW-BMW-EVO-N23
When you shift gear reverse and i-drive button upAVM Screen size will be change <PIP Size> <Full Size>
AVMScreen
OEM
AVM
Full Size
PIP Size
OEM PDC
OEM PDCAVM
OEM PDCAVM
OEM PDCAVM AVM
OEM Camera
If it connected 12V to 'REVERSE 12V IN wire"The screen will be change to “AVM mode”
<AV Cable>
12V IN
OR
support@car-solutions.com car-solutions.com
car-s
olutio
ns.co
m
IR IN
IR IN
DVB-T IR
DTV Diagram
WIRE TO DVB-T IR (OUT)
IR SIGNAL INDO
WN
UP
SEL
MA
NU
DVB-T DEVICE
HDMIOR
CVBS
POWER
SIGNAL
GROUND
DVB-TV IR SensorRed
White
Black
support@car-solutions.com car-solutions.com
car-s
olutio
ns.co
m
Settings (How To Use KEYPAD)D
OW
NU
PSE
LM
AN
U
1
2
3
4
MENU
1 ChangingModes Press the button short Order : HDMI → HDMI2 → HDMI3
→ NAVI → DVB-T →DVD → OEM
Button Function Operation Remarks
Button Function Operation
Select the setting menuand setting values. Press the button short
SEL
2
Move the menu-pointer and adjust the setting values Press the button short
UP
3
DOWN
4
Back to previous menu When press the button short. Press the button short
MANU
1
KEYPAD - Function #1
KEYPAD - Function #2
support@car-solutions.com car-solutions.com
car-s
olutio
ns.co
m
NAVIGATION
REAR VIEW
AV1 (FRONT VIEW)
AV2 (DTV)
NONE
CUSTOM
EXIT
DIP SWITCH INFO :
HDMI 1
HDMI 2
HDMI 3
NAVIGATION
REAR VIEW
AV1 (FRONT VIEW)
AV2 (DTV)
NONE
CUSTOM
EXIT
DIP SWITCH INFO :
Settings
FIRMWARE DATE : 2018-03-02MAIN :2018-03-02SUB :2018-03-02TW23 :
DEFAULTINPUT SOURCE DEFAULTINPUT SOURCE DEFAULTINPUT SOURCE DEFAULTINPUT SOURCE DEFAULT
INPUT SOURCE DEFAULT
BRIGHT AVM
CONTRAST RED DTV
CONTRAST GREEN DEFAULT
CONTRAST BLUE
INPUT SOURCE DEFAULT
FIRMWARE DATE : 2018-03-02MAIN :2018-03-02SUB :2018-03-02TW23 :
128
AVM KEEPING TIME R → D 7 Sec
AVM KEEPING TIME P → D 7 Sec
PGS ON / OFF OFF
PGS - HORIZONTAL 128
INPUT SOURCE AVM ( AROUND VIEW)
BRIGHT 128
CONTRAST RED 128
CONTRAST GREEN 128
CONTRAST BLUE
PGS - VERTICAL 128
HDMI - DEFALUT
- BRIGHT and CONTRAST Adjust the values of brightness and contrast
- INPUT SOURCE ( Hdmi device model select ) DEFALUTAVMDTV ( Digital Television )
( 360° Around View Camera )
HDMI INPUT - AVM- BRIGHT and CONTRAST
Adjust the values of brightness and contrast - AVM KEEPING TIME
If the keeping time set is “OFF”The AVM screen stayedWhen the "P" button while active and When the "P" button will be disabled.The Screen will be change to previous screen.
When you shift gear ‘from reverse to drive’ or ‘from parking to drive’,it just works automatically during the activation time you selected.
- PGS (Parking Guide System) Adjust position of parking guide lines and select the lines ‘ON or OFF’.
HDMI 1
HDMI 2
HDMI 3
support@car-solutions.com car-solutions.com
car-s
olutio
ns.co
m
Settings HDMI INPUT - DTV- BRIGHT and CONTRAST
Adjust the values of brightness and contrast - REMOTE OSD ON / OFF
You can control to some of function on DTV remote control by OSD UI
HDMI 1
HDMI 2
HDMI 3
REAR VIEW
AV1 (FRONT VIEW)
AV2 (DTV)
NONE
CUSTOM
EXIT
DIP SWITCH INFO : FIRMWARE DATE : 2018-03-02MAIN :2018-03-02SUB :2018-03-02TW23 :
DEFAULTINPUT SOURCE DEFAULTINPUT SOURCE DEFAULTINPUT SOURCE DEFAULTINPUT SOURCE DEFAULT
BRIGHT 125
CONTRAST RED 125
CONTRAST GREEN 125
CONTRAST BLUE 125
CONTRAST BLUE
INPUT SOURCE DEFAULT
NAVIGATION- BRIGHT and CONTRAST
Adjust the values of brightness and contrast NAVIGATION
FIRMWARE DATE : 2018-03-02MAIN :2018-03-02SUB :2018-03-02TW23 :
128
REMOTE OSD ON / OFF ON
MEMORY UP 0x807f807f
MEMORY DOWN 0x807f807f
MEMORY LEFT Lorem ipsum dolor sit amet, 0x807f807f
HDMI 1 INPUT SOURCE DTV
HDMI 2 BRIGHT 128
HDMI 3 CONTRAST RED 128
NAVIGATION CONTRAST GREEN 128
REAR VIEW CONTRAST BLUE
AV1 (FRONT VIEW)
AV2 (DTV)
NONE
CUSTOM
EXIT MEMORY RIGHT
MEMORY OK
MEMORY MENU
MEMORY EXIT
MEMORY ETC1
0x807f807f
0x807f807f
0x807f807f
0x807f807f
0x807f807f
DIP SWITCH INFO :
12345678
MEMORY ETC2 0x807f807f9
support@car-solutions.com car-solutions.com
car-s
olutio
ns.co
m
Settings
HDMI 1
HDMI 2
HDMI 3
NAVIGATION
REAR VIEW
AV1 (FRONT VIEW)
AV2 (DTV)
NONE
CUSTOM
EXIT
DIP SWITCH INFO : FIRMWARE DATE : 2018-03-02MAIN :2018-03-02SUB :2018-03-02TW23 :
128
AVM KEEPING TIME R → D 7 Sec
AVM KEEPING TIME P → D 7 Sec
PGS ON / OFF OFF
PGS - HORIZONTAL 128
INPUT SOURCE AVM ( AROUND VIEW)
BRIGHT 128
CONTRAST RED 128
CONTRAST GREEN 128
CONTRAST BLUE
PGS - VERTICAL 128
REAR VIEW INPUT - AVM
REAR VIEW INPUT - OEM CAMERA
- BRIGHT and CONTRAST Adjust the values of brightness and contrast
- INPUT SOURCE ( Hdmi device model select ) OEM CAMERAAVMEXTERNAL CAMERA
( 360° Around View Camera )
HDMI 1
HDMI 2
HDMI 3
NAVIGATION
AV1 (FRONT VIEW)
AV2 (DTV)
NONE
CUSTOM
EXIT
DIP SWITCH INFO : FIRMWARE DATE : 2018-03-02MAIN :2018-03-02SUB :2018-03-02TW23 :
DEFAULTINPUT SOURCE DEFAULTINPUT SOURCE DEFAULTINPUT SOURCE DEFAULTINPUT SOURCE DEFAULT
INPUT SOURCE
BRIGHT AVM (AROUND VIEW)
CONTRAST RED EXTERNAL CAMERA
CONTRAST GREEN DEFAULT
CONTRAST BLUE
INPUT SOURCE DEFAULT
REAR VIEW
OEM CAMERA
- BRIGHT and CONTRAST Adjust the values of brightness and contrast
- AVM KEEPING TIMEIf the keeping time set is “OFF”The AVM screen stayedWhen the "P" button while active and When the "P" button will be disabled.The Screen will be change to previous screen.
When you shift gear ‘from reverse to drive’ or ‘from parking to drive’,it just works automatically during the activation time you selected.
- PGS (Parking Guide System) Adjust position of parking guide lines and select the lines ‘ON or OFF’.
support@car-solutions.com car-solutions.com
car-s
olutio
ns.co
m
Settings
- PGS (Parking Guide System) Adjust position of parking guide lines and select the lines ‘ON or OFF’.
REAR VIEW INPUT - EXTERNAL CAMERA- BRIGHT and CONTRAST
Adjust the values of brightness and contrast
HDMI 1
HDMI 2
HDMI 3
NAVIGATION
AV1 (FRONT VIEW)
AV2 (DTV)
NONE
CUSTOM
EXIT
DIP SWITCH INFO : FIRMWARE DATE : 2018-03-02MAIN :2018-03-02SUB :2018-03-02TW23 :
128
PGS ON / OFF OFF
PGS - HORIZONTAL 128
PGS - VERTICAL 128
INPUT SOURCE DEFAULT
INPUT SOURCE
BRIGHT 128
CONTRAST RED
CONTRAST GREEN 128
CONTRAST BLUE
INPUT SOURCE DEFAULT
REAR VIEW
EXTERNAL CAMERA
128
support@car-solutions.com car-solutions.com
car-s
olutio
ns.co
m
Settings
HDMI 1
HDMI 2
HDMI 3
NAVIGATION
REAR VIEW
AV1 (FRONT VIEW)
AV2 (DTV)
NONE
CUSTOM
EXIT
DIP SWITCH INFO : FIRMWARE DATE : 2018-03-02MAIN :2018-03-02SUB :2018-03-02TW23 :
128
CAM KEEPING TIME R → D 7 Sec
CAM KEEPING TIME P → D 7 Sec
PGS ON / OFF OFF
ADJUST - HORIZONTAL 128
INPUT SOURCE EXTERNAL CAMERA
BRIGHT 128
CONTRAST RED 128
CONTRAST GREEN 128
CONTRAST BLUE
ADJUST - VERTICAL 128
AV1 (FRONT VIEW INPUT ) - EXTERNAL CAMERA- BRIGHT and CONTRAST
Adjust the values of brightness and contrast - FRONT CAM KEEPING TIME
When you shift gear ‘from reverse to drive’ or ‘from parking to drive’,it just works automatically during the activation time you selected.
AV1 (FRONT VIEW INPUT ) - OEM CAMERA- FRONT CAM KEEPING TIME
When you shift gear ‘from reverse to drive’ or ‘from parking to drive’,it just works automatically during the activation time you selected.
HDMI 1
HDMI 2
HDMI 3
NAVIGATION
REAR VIEW
AV2 (DTV)
NONE
CUSTOM
EXIT
DIP SWITCH INFO : FIRMWARE DATE : 2018-03-02MAIN :2018-03-02SUB :2018-03-02TW23 :
128
AVM KEEPING TIME R → D 7 Sec
AVM KEEPING TIME P → D 7 Sec
PGS ON / OFF OFF
ADJUST - HORIZONTAL 128
INPUT SOURCE OEM CAMERA
CAM KEEPING TIME R → D 7 Sec
CAM KEEPING TIME P → D 7 Sec
CONTRAST GREEN 128
CONTRAST BLUE
ADJUST - VERTICAL 128
AV1 (FRONT VIEW)
support@car-solutions.com car-solutions.com
car-s
olutio
ns.co
m
Settings
FIRMWARE DATE : 2018-03-02MAIN :2018-03-02SUB :2018-03-02TW23 :
128
REMOTE OSD ON / OFF ON
MEMORY UP 0x807f807f
MEMORY DOWN 0x807f807f
MEMORY LEFTLorem ipsum dolor sit amet,
0x807f807f
HDMI 1
HDMI 2
BRIGHT 128
HDMI 3
CONTRAST RED 128
NAVIGATION
CONTRAST GREEN 128
REAR VIEW
CONTRAST BLUE
AV1 (FRONT VIEW)
AV2 (DTV)
NONE
CUSTOM
EXIT
MEMORY RIGHT
MEMORY OK
MEMORY MENU
MEMORY EXIT
MEMORY ETC1
0x807f807f
0x807f807f
0x807f807f
0x807f807f
0x807f807f
DIP SWITCH INFO :
1
AV2 DTV- BRIGHT and CONTRAST
Adjust the values of brightness and contrast - REMOTE OSD ON / OFF
You can control to some of function on DTV remote control by OSD UI
2345678
MEMORY ETC2 0x807f807f9
support@car-solutions.com car-solutions.com
car-s
olutio
ns.co
m
Settings
CUSTOM- IDRIVE ON / OFF
ON - When you use A-LINK. If you use i-drive buttons. The OEM function will be not working by i-drive buttons
HDMI 1
HDMI 2
HDMI 3
NAVIGATION
REAR VIEW
AV2 (DTV)
NONE
EXIT
DIP SWITCH INFO : FIRMWARE DATE : 2018-03-02MAIN :2018-03-02SUB :2018-03-02TW23 :
128
AVM KEEPING TIME R → D 7 Sec
AVM KEEPING TIME P → D 7 Sec
PGS ON / OFF OFF
ADJUST - HORIZONTAL 128
IDRIVE ON / OFF ON
CAM KEEPING TIME R → D 7 Sec
CAM KEEPING TIME P → D 7 Sec
CONTRAST GREEN 128
CONTRAST BLUE
ADJUST - VERTICAL 128
AV1 (FRONT VIEW)
CUSTOM
support@car-solutions.com car-solutions.com
car-s
olutio
ns.co
m