Post on 31-Aug-2018
Sliding DoorDoor Selection Chart
1800-325-9995www.hagerco.com
Max. Door Page PackagedWeight Series No. Sets Track Parts Bags Description
BY-PASS
60# 9810 7 9514 9810 9814 Aluminum track60# 9820 8 9614 9820 9540 Aluminum track, 13/4" fascia60# 9830 9 N/A 9830 9540 Aluminum track, 3" fascia60# 9840 10 9844 9840 9540 Steel track
100# 9602 4 N/A 9602 9575 Aluminum double box track
125# 9602 4 9675 9602 9679 Aluminum double box track125# 9603 5 9673 9603 9680 Aluminum double box track with fascia125# 9702 6 9775 9702 9777 Aluminum double I-beam track
150# 9602 4 9676 9602 9680 Aluminum double box track150# 9603 5 9674 9603 9680 Aluminum double box track with fascia150# 9600 3 9611 9821 9892 Aluminum double box track
175# 9110/9130 2 9110 9101 9109 Aluminum heavy duty I-beam track
250# 9875 11 9875 9801 9816 hanger Aluminum box track250# 9885 12 9885 9803 9816 hanger Aluminum double box track with 31/2" fascia250# 9600 3 9612 9821 9893 Aluminum double box track
275# 9110/9130 2 9130 9101 9129 Aluminum heavy duty I-beam track
BI-FOLD
50# 9570 13 9570 9601/9599 9569 Aluminum or steel box track
125# 9870 15 9870 9801 9817 & 9818 Aluminum box track125# 9100 17 9162/9164 9101 9160 Aluminum I-beam track125# 9890 16 9890 9801 9827 & 9828 Aluminum box track125# 9800 14 9860 9821 9894 Aluminum box track
125# 9601 19 9678 9601 9632 Aluminum box track125# 9701 20 9778 9701 9779 Aluminum I-beam track
150# 9601 19 N/A 9601 9633 Aluminum box track
175# 9110/9130 18 9110 9101 9109 Aluminum I-beam track
250# 9801 21 9878 9801 9742 Aluminum heavy duty box track250# 9903 22 9901 9821 9895 Aluminum heavy duty box track
275# 9110/9130 18 9130 9101 9129 Aluminum heavy duty I-beam track
UNIVERSAL POCKET DOOR FRAME KITS
125# 9631 23 9631-80 9599 N/A Pocket Door Kit for 3'0" wide 6'8" high door
150# 9630 23 9630-84 9599 N/A Pocket Door Kit for 3'0" wide 7'0" high door150# 9629 23 9629-96 9599 N/A Pocket Door Kit for 3'0" wide 8'0" high door150# 9628 23 9628-108 9599 N/A Pocket Door Kit for 3'0" wide 9'0" high door
250# 9850 24 9850-96 9801 N/A Pocket Door Kit for 4'0" wide 8'0" high door250# 9850 24 9850-102 9801 N/A Pocket Door Kit for 4'0" wide 8'6" high door
Note: Sheet metal screws provided for wood or metal applications.
Sliding DoorBy-Pass
2 800-325-9995www.hagerco.com
Heavy Duty Aluminum I-Beam Track & Hardware
9110/9130 Series Conforms to ANSI A156.14/Type: D8731
• For doors 1" (25.4 mm) thick and up• 9110 Series: Up to 175 lbs. (79.5 kg) per door • 9130 Series: Up to 275 lbs. (124.7 kg) per door • Track is extruded aluminum jump-proof style with “I’’ shaped rails • Hangers have 1" (25.4 mm) diameter wheels with steel ball bearings
91010.125" (3 mm) thick aluminum
9102 9105 9111
9112 9113
9114 9122
91219909
9115
Packaged Sets
Track: Use two pieces for by-pass
Parts Bags
Components (sold separately)
1-7/8"(48 mm)
1-19/64"(33 mm)
3-1/4" to 3-3/4"(83 to 95 mm)
Interchanges with:• Grant 1210/1230 series
9110 Sets Include 9101 Track & 9109 Parts Bag (for doors up to 175 lbs./79 kg)Part # Description
9110-60 5' (1524 mm) By-Pass Set for two 2'6" (762 mm) Doors 9110-72 6' (1829 mm) By-Pass for two 3'0" (914 mm) Doors 9110-84 7' (2134 mm) By-Pass Set for two 3'6" (1067 mm) Doors 9110-96 8' (2438 mm) By-Pass Set for two 4'0" (1219 mm) Doors 9110-144 12' (3658 mm) By-Pass Set for two 6'0" (1829 mm) Doors
9130 Sets Include 9101 Track & 9129 Parts Bag (for doors up to 275 lbs./125 kg)Part # Description
9130-60 5' (1524 mm) By-Pass Set for two 2'6" (762 mm) Doors 9130-72 6' (1829 mm) By-Pass Set for two 3'0" (914 mm) Doors 9130-120 10' (3048 mm) By-Pass Set for two 5'0" (1524 mm) Doors 9130-132 11' (3353 mm) By-Pass Set for two 5'6" (1676 mm) Doors 9130-144 12' (3658 mm) By-Pass Set for two 6'0" (1829 mm) Doors
Part # Description
9101-72 72" (1829 mm) Aluminum I-Beam Track9101-84 84" (2134 mm) Aluminum I-Beam Track9101-96 96" (2438 mm) Aluminum I-Beam Track9101-120 120" (3048 mm) Aluminum I-Beam Track9101-144 144" (3658 mm) Aluminum I-Beam Track9101-192 192" (4877 mm) Aluminum I-Beam Track
Part # Description
9102 2 Wheel Hanger - for 175 lbs. (79.4 kg) Doors9105 4 Wheel Hanger - for 275 lbs. (124.7 kg) Doors9111 Fixed Bottom Door Guide 9112 Stop, used with 9102 Hanger 9113 Stop, used with 9105 Hanger 9115 Bottom Door Guide 9121 Bottom Guide for 91229909 Adjustable Guide for Doors up to 13/4" - Steel Base/Celcon/Nylon Posts 9114-72 72" (1829 mm) Bottom Guide Rail - Extruded Aluminum 9114-96 96" (2438 mm) Bottom Guide Rail - Extruded Aluminum 9114-144 144" (3658 mm) Bottom Guide Rail - Extruded Aluminum 9122 Bottom Track 3/4" (19 mm) wide x 5/8" (16 mm) tall x 0.062" (1.6 mm) thick -
up to 192" (4877 mm) long
Part # Description9109 2 each 9102 2 Wheel Hangers, 9115 Floor Guide 9129 2 each 9105 4 Wheel Hangers, 9115 Floor Guide
Sliding DoorBy-Pass
3800-325-9995www.hagerco.com
Packaged Sets
Interchanges with:• Stanley 125/250 Series• Johnson 100 Series
9611 Sets Include 9821 Track & 9892 Parts Bag (for doors up to 150 lbs./68 kg)Part # Description
9611-60 By-Pass Set for two 30" (762 mm) Doors 9611-72 By-Pass Set for two 36" (914 mm) Doors 9611-96 By-Pass Set for two 48" (1219 mm) Doors
9612 Sets Include 9821 Track & 9893 Parts Bag (for doors up to 250 lbs./113kg)Part # Description
9612-60 By-Pass Set for two 30" (762 mm) Doors 9612-72 By-Pass Set for two 36" (914 mm) Doors 9612-96 By-Pass Set for two 48" (1219 mm) Doors
Part # Description
9821-59 59" (1499 mm) Aluminum Box Track9821-71 71" (1803 mm) Aluminum Box Track9821-96 96" (2438 mm) Aluminum Box Track9821-144 144" (3658 mm) Aluminum Box Track
Track: Use two pieces for by-pass
Parts Bags
Components (sold separately)
Part # Description9892 4 each 9824 4 Wheel Hangers with Quick Release Top Mount Plate, 1 each 9909 Guide,
9573 Spacer Kit9893 4 each 9825 4 Wheel Ball Bearing Hangers with Quick Release Top Mount Plate,
1 each 9909 Guide, 9573 Spacer Kit
A B
98210.06" (1.5 mm) thick aluminum
Part # Description
9824 4 Wheel Hanger with Quick Release Top Mount Plate9825 4 Wheel Ball Bearing Hanger with Quick Release Top Mount Plate9909 Adjustable Guide for Doors up to 13/4" (44 mm) - Steel Base/Celcon/Nylon Posts9573 Celcon Plastic Spacer Kit for use with 13/4" (45 mm) Doors
Track is properly spaced for 13/8" (35 mm) Doors9815 Bumper Stop9351 Guide for 13/8" (35 mm) Doors9353 Adjustable Door Guide for 3/4" (19 mm) to 13/8" (35 mm) Doors9354 3/4" (19 mm) Riser - Fits 9351 & 93539906 Guide for 13/8" (35 mm) Doors - Steel Base/Celcon Posts9880 Door Stop2610 3/4" (19 mm) Pull 9865 13/4" (45 mm) Tan Plastic Pull2630 21/8" (54 mm) Pull9121 Bottom Guide for 91229122 Bottom Track 3/4" (19 mm) wide x 5/8" (16 mm) tall x 0.062" (1.6 mm) thick -
up to 192" (4877 mm) long
Fascia Part # Description9709-72 72" (1829 mm) 23/4" (70 mm) Aluminum Fascia9709-96 96" (2438 mm) 23/4" (70 mm) Aluminum Fascia
23/4" (70 mm) high5/8" (16 mm) lip
Heavy Duty Aluminum Box Tack and Hardware
9600 Series Conforms to ANSI A156.14/Type: D8731, D8751
• For doors 13⁄8" (35 mm) and up (Illustration “A”)• For doors 13⁄4" (44 mm) tracks are spaced 3⁄8" (10 mm) apart using 9573 (Illustration “B”)• 9611 Series: Up to 150 lbs. (68 kg) per door • 9612 Series: Up to 250 lbs. (113 kg) per door• Quick release hangers allow easy door hanging and removal • Hangers interchange with Stanley & Johnson track and hangers• Universal extruded aluminum track interchanges with Stanley & Johnson track and hangers• Hangers have 1" (25.4 mm) diameter wheels
Sliding DoorBy-Pass
4 800-325-9995www.hagerco.com
Heavy Duty Aluminum Double Box Track & Hardware
9602 Series Conforms to ANSI A156.14/Type: D8731, D8741, D8751
• For doors 3⁄ 4" (19 mm) to 13⁄4" (44 mm) thick• Up to 100 lbs. (45.4 kg) with 9572 hanger• 9675 for up to 125 lbs. (57 kg) per door• 9676 for up to 150 lbs. (68 kg) per door• Track is extruded aluminum jump-proof style with ‘‘V’’ shaped rails• Four wheel hangers with jump-proof box design• Hangers have four 7⁄ 8" (22 mm) diameter wheels
Packaged Sets
Fascia
Interchanges with:• Stanley 1755, 40-3664, 40-3855/BP150• Johnson 134F/138F• Grant 7000 Series• Cox 15-220 Series• Lawrence 581 Track, HD520 Hardware
9602.050" (1.3 mm) thick aluminum
Parts Bags
Track
9675 Sets Include 9602 Track & 9679 Parts Bag (for doors up to 125 lbs./57 kg)Part # Description
9675-48 By-Pass Set for two 24" (610 mm) Doors9675-60 By-Pass Set for two 30" (762 mm) Doors9675-72 By-Pass Set for two 36" (914 mm) Doors9675-96 By-Pass Set for two 48" (1219 mm) Doors
9676 Sets Include 9602 Track, 9680 Parts Bag (for doors up to 150 lbs./68 kg)Part # Description
9676-60 By-Pass Set for two 30" (762 mm) Doors9676-72 By-Pass Set for two 36" (914 mm) Doors9676-96 By-Pass Set for two 48" (1219 mm) Doors
Part # Description
9602-46 46" (1168 mm) Aluminum Double Box Track9602-58 58" (1473 mm) Aluminum Double Box Track9602-70 70" (1778 mm) Aluminum Double Box Track9602-94 94" (2388 mm) Aluminum Double Box Track9602-118 118" (2997 mm) Aluminum Double Box Track9602-142 142" (3607 mm) Aluminum Double Box Track
Part # Description
9572 4 Wheel Hanger & Door Bracket for 100 lb. (45 kg) Doors9605 4 Wheel Hanger Only for 125 lb. (57 kg) Doors9606 4 Wheel Ball Bearing Hanger Only for 150 lb. (68 kg) Doors9607 Side Mount Plate - 3/8" (10 mm) Offset - for 9605 and 96069608 Side Mount Plate - 11/16" (17 mm) Offset - for 9605 and 96069609 Top Mount Plate for 9605/9606 - Fits Doors 13/8" (35 mm) & up9815 Bumper Stop9880 Door Stop9351 Guide for 13/8" (35 mm) Doors9353 Adjustable Door Guide for 3/4" (19 mm) to 13/8" (35 mm) Doors9354 3/4" (19 mm) Riser - Fits 9351 & 93539902 Guide for 3/4" (19 mm) Doors - Steel Base/Celcon Posts9906 Guide for 13/8" (35 mm) Doors - Steel Base/Celcon Posts9909 Adjustable Guide for Doors up to 13/4" (44 mm) - Steel Base/Nylon Posts2610 3/4" (19 mm) Pull 9865 13/4" (45 mm) Tan Plastic Pull2630 21/8" (54 mm) Pull
Part # Description
9575 100 lb. (45 kg): 4 each 9572 Hanger, 1 each 9909 Guide9679 125 lb. (57 kg): 4 each 9605 Hanger and 9609 Plate, 1 each 9909 Guide9680 150 lb. (68 kg): 4 each 9606 Hanger and 9609 Plate, 1 each 9909 Guide
Side Mount Plate Selection Chart
Door Thickness 3/4" 1" 11/8" 13/8" 13/4"(19 mm) (25.4 mm) (29 mm) (35 mm) (44 mm)
Front Door Plate 9608 9608 9608 9608 9607Rear Door Plate 9607 9607 9607 9608 9608
Part # Description9709-72 72" (1829 mm) 23/4" (70 mm) Aluminum Fascia9709-96 96" (2438 mm) 23/4" (70 mm) Aluminum Fascia
23/4" (70 mm) high5/8" (16 mm) lip
Components (sold separately)
Sliding DoorBy-Pass
5800-325-9995www.hagerco.com
Heavy Duty Aluminum Track with 25⁄8" (66 mm) Fascia & Hardware
9603 Series Conforms to ANSI A156.14/Type: D8751, D8752
• For doors 3⁄ 4" (19 mm) to 13⁄4" (44 mm) thick• Up to 100 lbs. (45.4 kg) per door with 9572 hanger• 9673 for up to 125 lbs. (57 kg) per door• 9674 for up to 150 lbs. (68 kg) per door• Track is extruded aluminum jump-proof style with ‘‘V’’ shaped rails and integral 25⁄ 8" fascia• Hangers have four 7⁄ 8" (22 mm) diameter wheels
Packaged Sets
Track
Interchanges with:• Stanley S1700F Series/BP150F• Johnson 134F/138F• Lawrence F581 Track, HDF520 Series Sets
Parts Bags
9673 Sets Include 9603 Track & 9679 Parts Bag (for doors up to 125 lbs./57 kg)Part # Description
9673-48 By-Pass Set for two 24" (610 mm) Doors 9673-60 By-Pass Set for two 30" (762 mm) Doors9673-72 By-Pass Set for two 36" (914 mm) Doors9673-96 By-Pass Set for two 48" (1219 mm) Doors
9674 Sets Include 9603 Track & 9680 Parts Bag (for doors up to 150 lbs./68 kg)Part # Description
9674-48 By-Pass Set for two 24" (610 mm) Doors9674-60 By-Pass Set for two 30" (762 mm) Doors9674-72 By-Pass Set for two 36" (914 mm) Doors9674-96 By-Pass Set for two 48" (1219 mm) Doors
Part # Description
9603-47 47" (1194 mm) Aluminum Double Box Track with 25/8" (66 mm) Built-In Fascia 9603-59 59" (1499 mm) Aluminum Double Box Track with 25/8" (66 mm) Built-In Fascia 9603-71 71" (1803 mm) Aluminum Double Box Track with 25/8" (66 mm) Built-In Fascia 9603-95 95" (2413 mm) Aluminum Double Box Track with 25/8" (66 mm) Built-In Fascia 9603-120 120" (3048 mm) Aluminum Double Box Track with 25/8" (66 mm) Built-In Fascia 9603-144 144" (3658 mm) Aluminum Double Box Track with 25/8" (66 mm) Built-In Fascia
Part # Description
9575 100 lb. (45 kg): 4 each 9572 Hanger, 1 each 9909 Guide 9679 125 lb. (57 kg): 4 each 9605 Hanger & 9609 Plate, 1 each 9909 Guide9680 150 lb. (68 kg): 4 each 9606 Hanger & 9609 Plate, 1 each 9909 Guide
Part # Description
9572 4 Wheel Hanger & Door Bracket for 100 lb. (45 kg) Doors 9605 4 Wheel Hanger Only for 125 lb. (57 kg) Doors 9606 4 Wheel Ball Bearing Hanger Only for 150 lb. (68 kg) Doors 9607 Side Mount Plate - 3/8" (10 mm) Offset - for 9605 & 9606 9608 Side Mount Plate - 11/16" (17 mm) Offset - for 9605 & 96069609 Top Mount Plate for 9605/9606 - Fits Doors 13/8" (35 mm) and up 9815 Bumper Stop 9880 Door Stop 9351 Guide for 13/8" (35 mm) Doors 9353 Adjustable Guide for 3/4" (19 mm) to 13/8" (35 mm) Doors9354 3/4" (19 mm) Riser - Fits 9351 & 9353 9902 Guide for 3/4" (19 mm) Doors - Steel Base/Celcon Posts 9906 Guide for 13/8" (35 mm) Doors - Steel Base/Celcon Posts 9909 Adjustable Guide for Doors up to 13/4" (44 mm) - Steel Base/Celcon/Nylon Posts 2610 3/4" (19 mm) Pull 9865 13/4" (45 mm) Tan Plastic Pull 2630 21/8" (54 mm) Pull
Side Mount Plate Selection Chart
Door Thickness 3/4" 1" 11/8" 13/8" 13/4"(19 mm) (25.4 mm) (29 mm) (35 mm) (44 mm)
Front Door Plate 9608 9608 9608 9608 9607Rear Door Plate 9607 9607 9607 9608 9608
96030.050" (1.3 mm) thick aluminum
Components (sold separately)
Sliding DoorBy-Pass
6 800-325-9995www.hagerco.com
Heavy Duty Aluminum Double I-Beam Track & Hardware
9702 Series Conforms to ANSI A156.14/Type: D8731, D8751
• For doors 13⁄ 8" (35 mm) use 9775 packaged set• For doors 3⁄4" (19 mm) to 13⁄4" (44 mm) thick use optional side mount plate• Up to 125 lbs. (57 kg) per door• Track is extruded aluminum jump-proof style with twin ‘‘V’’ shaped rails• Hangers have four 7⁄ 8" (22 mm) diameter wheels
Packaged Sets
Interchanges with:• Stanley 1338 Track, 2830-R Sets
1100-BX/1400-BX, 1499-BX• Cox 15-220 Series
Compares to:• Grant 7000 Series• Johnson 134F/138F Series
97020.050" (1.3 mm) thick aluminum
Fascia
Parts Bags
Track
9775 Sets Include 9702 Track & 9777 Parts Bag (for doors up to 125 lbs./57 kg) Part # Description
9775-48 By-Pass Set for two 24" (610 mm) Doors 9775-60 By-Pass Set for two 30" (762 mm) Doors9775-72 By-Pass Set for two 36" (914 mm) Doors 9775-96 By-Pass Set for two 48" (1219 mm) Doors
Part # Description
9702-46 457/8" (1165 mm) Aluminum Double I-Beam Track 9702-58 577/8" (1470 mm) Aluminum Double I-Beam Track9702-70 697/8" (1775 mm) Aluminum Double I-Beam Track 9702-93 927/8" (2359 mm) Aluminum Double I-Beam Track 9702-120 120" (3048 mm) Aluminum Double I-Beam Track 9702-144 144" (3658 mm) Aluminum Double I-Beam Track
Part # Description9709-72 72" (1829 mm) 23/4" (70 mm) Aluminum Fascia9709-96 96" (2438 mm) 23/4" (70 mm) Aluminum Fascia
Part # Description
9777 4 each 9704 Hanger & 9609 Plate, 1 each 9909 Guide 9175 4 each 9704 Hanger, 2 each 9607 Plate & 9608 Plate, 1 each 9909 Guide 9776 4 each 9704 Hanger & 9608 Plate, 1 each 9351 Guide
Part # Description
9704 4 Wheel Hanger Only 9609 Top Mount Plate for 9704 9607 Side Mount Door Plate - 3/8" (10 mm) Offset for 9704 9608 Side Mount Door Plate - 11/16" (17 mm) Offset for 9704 9815 Bumper Stop 9880 Door Stop 9351 Door Guide for 13/8" (35 mm) Doors 9353 Adjustable Door Guide for 3/4" (19 mm) to 13/8" (35 mm) Doors9354 Riser - Fits 9351 & 9353 9902 Guide for 3/4" (19 mm) Doors - Steel Base/Celcon Posts 9906 Guide for 13/8" (35 mm) Doors - Steel Base/Celcon Posts 9909 Adjustable Guide for Doors up to 13/4" (44 mm) - Steel Base/Celcon/Nylon Posts2610 3/4" (19 mm) Pull 9865 13/4" (44 mm) Tan Plastic Pull 2630 21/8" (54 mm) Pull
23/4" (70 mm) high5/8" (16 mm) lip
Side Mount Plate Selection Chart
Door Thickness 3/4" 1" 11/8" 13/8" 13/4"(19 mm) (25.4 mm) (29 mm) (35 mm) (44 mm)
Front Door Plate 9608 9608 9608 9608 9607Rear Door Plate 9607 9607 9607 9608 9608
Components (sold separately)
Sliding DoorBy-Pass
7800-325-9995www.hagerco.com
Aluminum Track & Hardware
9810 Series Conforms to ANSI A156.14/Type: D8742
• For doors 3⁄4" (19 mm) and 13⁄ 8" (35 mm) thick• Up to 60 lbs. (27 kg) per door with single wheel hangers 9400/9401• Up to 75 lbs. (34 kg) per door with twin wheel hangers 9202/9203• Track is extruded aluminum jump-proof style with ‘‘V’’ shaped rails• Hangers have 7⁄ 8" (22 mm) diameter wheels
Packaged Sets
Interchanges with:• Stanley 40-3230, 40-3240,
40-3260, BP60/BP75-02• Cox 12-200 Series
Compares to:• Johnson 2200 Series• Grant 6000/8000 Series• Lawrence 502 Track
98100.050" (1.3 mm) thick aluminum
Track: Track mounting screws - 11⁄4" (32 mm) packed in parts bags, 5⁄ 8" (16 mm) packed with bulk hangers
Parts Bags
Components (sold separately)
9514 Sets (2 door) Include 9810 Track & 9814 Parts Bag9583 Sets (3 door) Include 9810 Track, 2 each 9400 Hangers, 4 each 9401 Hangers, 2 each 9353Guides & 3 each 2610 PullsPart # Description
9514-48 By-Pass Set for two 24" (610 mm) Doors 9514-60 By-Pass Set for two 30" (762 mm) Doors9514-72 By-Pass Set for two 36" (914 mm) Doors9514-96 By-Pass Set for two 48" (1219 mm) Doors9583-96 By-Pass Set for three 32" (813 mm) Doors
Part # Description
9810-46 463/8" (1178 mm) Aluminum Track 9810-58 583/8" (1483 mm) Aluminum Track 9810-70 703/8" (1788 mm) Aluminum Track 9810-93 933/8" (2371 mm) Aluminum Track9810-120 120" (3048 mm) Aluminum Track 9810-144 144" (3658 mm) Aluminum Track
Part # Description9814 2 each 9400 Hanger & 9401 Hanger, 2 each 2610-US3 Pull, 1 each 9353 Guide
Part # Description
9200 Single Wheel Hanger - ‘‘A’’ Offset 9201 Single Wheel Hanger - ‘‘B’’ Offset 9202 Twin Wheel Hanger - ‘‘B’’ Offset 9203 Twin Wheel Hanger - ‘‘A’’ Offset9351 Guide for 13/8" (35 mm) Door 9353 Adjustable Guide for 3/4" (19 mm) to 13/8" (35 mm) Doors9354 Riser - 3/4" (19 mm) Fits 9351 & 93539400 Micro-Cam Hanger - ‘‘A’’ Offset 9401 Micro-Cam Hanger - ‘‘B’’ Offset9815 Bumper Stop9880 Angle Stop9906 Guide for 13/8" (35 mm) Doors - Steel Base/Celcon Posts2610 3/4" (19 mm) Pull 9865 13/4" (44 mm) Tan Plastic Pull 2630 21/8" (54 mm) Pull
Hanger Selection Chart
Door Thickness 3/4" 1" to 11/8" 13/8"(19 mm) (25.4 mm to 29 mm) (35 mm)
Front Hanger B B A Rear Hanger A B B
Sliding DoorBy-Pass
8 800-325-9995www.hagerco.com
Aluminum Track with 13⁄4" (44 mm) Fascia & Hardware
9820 Series Conforms to ANSI A156.14/Type: D8752
• For doors 13⁄8" (35 mm) thick• Uses all “B” offset hangers• Up to 60 lbs. (27 kg) with single wheel hanger 9401• Up to 75 lbs. (34 kg) with twin wheel hanger 9202• Track is extruded aluminum jump-proof style with integral 13⁄4" (44 mm) fascia• Hangers have one or two side mounted 7⁄ 8 " (22 mm) diameter wheels
Packaged Sets
Interchanges with:• Stanley 8139 Track, BP75-06
8400 Series Sets & 40-3340• Cox 12-400 Series
Compares to:• Johnson 2200F Series• Grant 6036 Series• Lawrence F502 Track
& F520 Series
Track: Track mounting screws - 11⁄4" (32 mm) packed in parts bags, 5⁄ 8" (16 mm) packed with bulk hangers
Parts Bags
Components (sold separately)
98200.050" (1.3 mm) thick aluminum
Part # Description
9820-48 48" (1219 mm) Aluminum Track with 13/4" (44 mm) Built-in Fascia9820-60 60" (1524 mm) Aluminum Track with 13/4" (44 mm) Built-in Fascia9820-72 72" (1829 mm) Aluminum Track with 13/4" (44 mm) Built-in Fascia9820-96 96" (2438 mm) Aluminum Track with 13/4" (44 mm) Built-in Fascia9820-120 120" (3048 mm) Aluminum Track with 13/4" (44 mm) Built-in Fascia9820-144 144" (3658 mm) Aluminum Track with 13/4" (44 mm) Built-in Fascia
Part # Description
9544 4 each 9202 Hanger, 2 each 2630-US3 Pull, 1 each 9351 Guide 9540 4 each 9401 Hanger, 2 each 2610-US3 Pull, 1 each 9351 Guide 9841 4 each 9401 Hanger, 2 each 9865 Pull, 1 each 9351 Guide 9843 4 each 9202 Hanger, 2 each 9865 Pull, 1 each 9351 Guide 9842 4 each 9401 Hanger, 2 each 2630-US3 Pull, 1 each 9351 Guide
9614 Sets Include 9820 Track & 9540 Parts Bag Part # Description
9614-48 By-Pass Set for two 24" (610 mm) Doors9614-60 By-Pass Set for two 30" (762 mm) Doors 9614-72 By-Pass Set for two 36" (914 mm) Doors 9683-96 By-Pass Set for three 32" (813 mm) Doors
Part # Description
9201 Single Wheel Hanger - ‘‘B’’ Offset 9202 Twin Wheel Hanger - ‘‘B’’ Offset 9351 Guide for 13/8" (35 mm) Door 9353 Adjustable Guide for 3/4" (19 mm) to 13/8" (35 mm) Doors9354 Riser - 3/4" (19 mm) Fits 9351 & 9353 9401 Micro-Cam Hanger - ‘‘B’’ Offset9815 Bumper Stop9880 Angle Stop 9906 Guide for 13/8" (35 mm) Doors - Steel Base/Celcon Posts2610 3/4" (19 mm) Pull 9865 13/4" (44 mm) Tan Plastic Pull 2630 21/8" (54 mm) Pull
Sliding DoorBy-Pass
9800-325-9995www.hagerco.com
Aluminum Track with 3" (76 mm) Fascia & Hardware
9830 Series Conforms to ANSI A156.14/Type: D8752
• For doors 13⁄8" (35 mm) thick• Uses all “B” offset hangers• Up to 60 lbs. (27 kg) with single wheel hanger 9401• Up to 75 lbs. (34 kg) with twin wheel hanger 9202• Track is extruded aluminum jump-proof style with integral 3" (76 mm) fascia• Hangers have one or two side mounted 7⁄ 8 " (22 mm) diameter wheels
Track: Track mounting screws - 11⁄4" (32 mm) packed in parts bags, 5⁄ 8" (16 mm) packed with bulk hangers
Interchanges with:• Stanley 8136 Series, BP75-05• Cox 12-600 Series
Compares to:• Johnson 2400
Parts Bags
Components (sold separately)
98300.06" (1.5 mm) thick aluminum
Part # Description
9830-48 48" (1219 mm) Aluminum Track with 3" (76 mm) Built-in Fascia9830-60 60" (1524 mm) Aluminum Track with 3" (76 mm) Built-in Fascia9830-72 72" (1829 mm) Aluminum Track with 3" (76 mm) Built-in Fascia9830-84 84" (2134 mm) Aluminum Track with 3" (76 mm) Built-in Fascia9830-96 96" (2438 mm) Aluminum Track with 3" (76 mm) Built-in Fascia9830-120 120" (3048 mm) Aluminum Track with 3" (76 mm) Built-in Fascia9830-144 144" (3658 mm) Aluminum Track with 3" (76 mm) Built-in Fascia
Part # Description
9544 4 each 9202 Hanger, 2 each 2630-US3 Pull, 1 each 9351 Guide 9540 4 each 9401 Hanger, 2 each 2610-US3 Pull, 1 each 9351 Guide 9841 4 each 9401 Hanger, 2 each 9865 Pull, 1 each 9351 Guide 9843 4 each 9202 Hanger, 2 each 9865 Pull, 1 each 9351 Guide 9842 4 each 9401 Hanger, 2 each 2630-US3 Pull, 1 each 9351 Guide
Part # Description
9201 Single Wheel Hanger - ‘‘B’’ Offset 9202 Twin Wheel Hanger - ‘‘B’’ Offset 9351 Guide for 13/8" (35 mm) Doors 9353 Adjustable Guide for 3/4" (19 mm) to 13/8" (35 mm) Doors9354 Riser - 3/4" (19 mm) Fits 9351 & 9353 9401 Micro-Cam Hanger - ‘‘B’’ Offset9815 Bumper Stop9880 Angle Stop 9906 Guide for 13/8" (35 mm) Doors - Steel Base/Celcon Posts2610 3/4" (19 mm) Pull 9865 13/4" (44 mm) Tan Plastic Pull 2630 21/8" (54 mm) Pull
Sliding DoorBy-Pass
10 800-325-9995www.hagerco.com
Galvanized Steel Track & Hardware
9840 Series Conforms to ANSI A156.14/Type: D8742
• For doors 11⁄8" (29 mm) and 13⁄8" (35 mm) thick use 9844 packaged set• For doors 3⁄ 4" (19 mm), 1" (25.4 mm), and 13⁄4" (44 mm) thick use 9840 track and refer to side
mount selection chart for combinations of hangers• Up to 60 lbs. (27 kg) with single wheel hanger 9401• Up to 75 lbs. (34 kg) with twin wheel hanger 9202• Track is zinc finished steel jump-proof style• Hangers have one or two side mounted 7⁄ 8" (22 mm) diameter wheels
Packaged Sets
Track: Track mounting screws - 11⁄4" (32 mm) packed in parts bags,5⁄ 8" (16 mm) packed with bulk hangers
Interchanges with:• Stanley 8603 Track &
8800 Series, BP75-01• Cox 12-300 Series
Compares to:• Stanley 40-3040/40-3140• Johnson 1138 Series• Grant 6000/8000 Series• Lawrence 702 Track
Parts Bags
Components (sold separately)
98400.03" (0.8 mm) 23 gauge
galvanized steel
Part # Description
9540 4 each 9401 Hanger, 2 each 2610-US3 Pull, 1 each 9351 Guide 9841 4 each 9401 Hanger, 2 each 9865 Pull, 1 each 9351 Guide 9842 4 each 9401 Hanger, 2 each 2630-US3 Pull, 1 each 9351 Guide 9843 4 each 9202 Hanger, 2 each 9865 Pull, 1 each 9351 Guide 9544 4 each 9202 Hanger, 2 each 2630-US3 Pull, 1 each 9351 Guide
Part # Description
9201 Single Wheel Hanger - ‘‘B’’ Offset 9202 Twin Wheel Hanger - ‘‘B’’ Offset 9351 Guide for 13/8" (35 mm) Doors 9353 Adjustable Guide for 3/4" (19 mm) to 13/8" (35 mm) 9354 Riser - 3/4" (19 mm) Fits 9351 & 9353 9401 Micro-Cam Hanger - ‘‘B’’ Offset9815 Bumper Stop9880 Angle Stop 9906 Guide for 13/8" (35 mm) Doors - Steel Base/Celcon Posts2610 3/4" (19 mm) Pull 9865 13/4" (44 mm) Tan Plastic Pull 2630 21/8" (54 mm) Pull
9844 Sets Include 9840 Track & 9540 Parts BagPart # Description
9844-48 By-Pass Set for two 24" (610 mm) Doors 9844-60 By-Pass Set for two 30" (762 mm) Doors9844-72 By-Pass Set for two 36" (914 mm) Doors9844-96 By-Pass Set for two 48" (1219 mm) Doors9845-96 By-Pass Set for three 32" (813 mm) Doors
Part # Description
9840-46 461/2" (1181 mm) Galvanized Steel Track 9840-58 581/2" (1486 mm) Galvanized Steel Track 9840-70 701/2" (1791 mm) Galvanized Steel Track 9840-81 811/2" (2070 mm) Galvanized Steel Track 9840-93 931/2" (2375 mm) Galvanized Steel Track 9840-120 120" (3048 mm) Galvanized Steel Track 9840-144 144" (3658 mm) Galvanized Steel Track
Side Mount Plate Selection Chart
Door Thickness 3/4" 1" 11/8" 13/8" 13/4"(19 mm) (25.4 mm) (29 mm) (35 mm) (44 mm)
Front Hanger B B A or B B ARear Hanger A A Same as Front B BDoor Gap 3/4" 1/2" 11/4" 9/16" 3/8"
Sliding DoorBy-Pass
11800-325-9995www.hagerco.com
Heavy Duty Aluminum Box Track & Hardware
9875 Series Conforms to ANSI A156.14/Type: D8731, D8751
• For doors 13⁄ 8" (35 mm) and up (Illustration “A”)• For doors 13⁄4" (44 mm), tracks are spaced 3⁄ 8" (10 mm) apart using 9574 (Illustration “B”)• Up to 250 lbs. (113 kg) per panel• Track is extruded aluminum jump-proof style with ‘‘V’’ shaped rails• Hangers have four 11⁄4" (32 mm) diameter wheels
Track: Use two pieces for by-pass
Interchanges with:• Stanley 57/58
Compares to:• Grant 1200 Series• Lawrence F571, ED520• Stanley BP250
Fascia
Components (sold separately)
98010.075" (1.9 mm) thick aluminum
A B
9875 Contents: 2 each 9801 Track, 4 each 9816 Hangers,9574 Spacer, 9909 Guide (Packaged sets for up to 1 3/4" (44 mm) doors) Part # Description
9875-60 5' (1524 mm) Opening for 2 Doors 9875-72 6' (1829 mm) Opening for 2 Doors 9875-96 8' (2438 mm) Opening for 2 Doors
Part # Description
9801-72 72" (1829 mm) Aluminum Box Track 9801-96 96" (2438 mm) Aluminum Box Track9801-120 120" (3048 mm) Aluminum Box Track 9801-144 144" (3658 mm) Aluminum Box Track 9801-192 192" (4877 mm) Aluminum Box Track
Part # Description9809-72 72" (1829 mm) 37/8" (98 mm) Aluminum Fascia9809-96 96" (2438 mm) 37/8" (98 mm) Aluminum Fascia
Part # Description
9816 4 Wheel Ball Bearing Hanger with 9609 Top Mount Bracket9353 Adjustable Door Guide for 3/4" (19 mm) to 13/8" (35 mm) Doors9351 Door Guide for 13/8" (35 mm) Doors9354 3/4" (19 mm) Riser - Fits 9351 & 93539815 Bumper Stop 9880 Stop 9909 Adjustable Guide for Doors up to 13/4" (44 mm) - Steel Base/Celcon/Nylon Posts9902 Guide for 3/4" (19 mm) Doors - Steel Base/Celcon Posts 9906 Guide for 13/8" (35 mm) Doors - Steel Base/Celcon Posts 2610 3/4" (19 mm) Pull9865 13/4" (44 mm) Tan Plastic Pull 2630 21/8" (54 mm) Pull9574 Celcon Plastic Spacer Kit for use with 13/4" (44 mm) Doors
Track is Properly Spaced for 13/8" (35 mm) Doors
Packaged Sets
Sliding DoorBy-Pass
12 800-325-9995www.hagerco.com
Heavy Duty Aluminum Double Box Track with 31⁄2" (89 mm) Fascia & Hardware
9885 Series Conforms to ANSI A156.14/Type: D8731, D8751
• For doors 13⁄ 8" (35 mm) to 13⁄4" (44 mm) thick• Up to 250 lbs. (113 kg) per door• Track is extruded aluminum jump-proof style with ‘‘V’’ shaped rails and integral 31⁄2" (88 mm) fascia• Hangers have four 11⁄4" (32 mm) diameter wheels• Smooth finish fascia
Packaged Sets
Track
3-1/2"(89 mm)
Fascia
1/2"(13 mm)
4-1/4" (107 mm)
2-3/4" to 3-3/4"(69 to 95 mm)Top of track to
top of door
Compares to:• Grant 1200 Series• Lawrence F571, ED520 Series
Components (sold separately)
98030.075" (1.9 mm) thick aluminum
Part # Description
9816 4 Wheel Ball Bearing Hanger with 9609 Top Mount Bracket9353 Adjustable Door Guide - 3/4" (19 mm) to 13/8" (35 mm)9351 Door Guide for 13/8" (35 mm) Doors9354 3/4" (19 mm) Riser - Fits 9351 & 93539815 Bumper Stop 9880 Door Stop 9909 Guide for up to 13/4" (44 mm) Doors - Steel Base/Celcon/Nylon Posts9902 Guide for 3/4" (19 mm) Doors - Steel Base/Celcon Posts 9906 Guide for 13/8" (35 mm) Doors - Steel Base/Celcon Posts2610 3/4" (19 mm) Pull 9865 13/4" (44 mm) Tan Plastic Pull 2630 21/8" (54 mm) Pull
9885 Contents: 9803 Track, 2 each 9816 Hangers, 1 each 9909 Guide, 1 each 9815 Bumper Stop* Part # Description
9885-48 4' (1219 mm) Opening for 2 Doors 9885-60 5' (1524 mm) Opening for 2 Doors 9885-72 6' (1829 mm) Opening for 2 Doors 9885-96 8' (2438 mm) Opening for 2 Doors 9886-96 8' (2438 mm) Opening for 4 Doors*
*4 Door set includes 4 each 9816 hangers, 1 each 9815 center stop
Part # Description
9803-48 4' (1219 mm) Aluminum Double Box Track with 31/2" (89 mm) Built-in Fascia 9803-60 5' (1524 mm) Aluminum Double Box Track with 31/2" (89 mm) Built-in Fascia 9803-72 6' (1829 mm) Aluminum Double Box Track with 31/2" (89 mm) Built-in Fascia 9803-96 8' (2438 mm) Aluminum Double Box Track with 31/2" (89 mm) Built-in Fascia 9803-120 10' (3048 mm) Aluminum Double Box Track with 31/2" (89 mm) Built-in Fascia9803-144 12' (3658 mm) Aluminum Double Box Track with 31/2" (89 mm) Built-in Fascia
Sliding DoorBi-Fold
13
Heavy Duty Steel or Aluminum Box Track & Hardware
9570 Series Conforms to ANSI A156.14/Type: D8621, D8642, D8652, D8662
• For doors 1" (25.4 mm) to 13⁄4" (44 mm) thick• Up to 125 lbs. (57 kg) per panel Bi-Fold• Up to 75 lbs. (34 kg) per panel Multi-Fold• Track is extruded aluminum jump-proof style with “I” beam track• Hangers have four 1" (25.4 mm) diameter wheels• Top and bottom pivots are heavy duty with solid brass bottom socket assembly for smooth, long lasting operation• Note: Loose pin full mortise hinges 1741/1279 recommended – not included (3 required for 9162, 6 required for 9164)
Packaged Sets
Track
Compares to:• Stanley 2600, BF50• Johnson 111• Grant 7000 Series• Lawrence HD 620/640
Parts Bags
Components (sold separately)
95990.030" (0.08 mm) thick
galvanized steel
96010.050" (1.3 mm) thick aluminum
*Installation note: Clearance between door bottom and top of 9122 trackmust be 5/8" (16 mm) min. to 1" (25.4 mm) max.
9570 Contents: 9601 Track, 9569 Parts BagPart # Description
9570-36 3' (914 mm) for two 18" (457 mm) Doors 9570-48 4' (1219 mm) for four 12" (305 mm) Doors 9570-60 5' (1524 mm) for four 15" (381 mm) Doors 9570-72 6' (1829 mm) for four 18" (457 mm) Doors 9570-96 8' (2438 mm) for four 24" (610 mm) Doors
Part # Description
9599-35 35" (889 mm) Galvanized Steel Box Track 9599-47 47" (1194 mm) Galvanized Steel Box Track 9599-55 55" (1397 mm) Galvanized Steel Box Track 9599-59 59" (1499 mm) Galvanized Steel Box Track 9599-63 63" (1600 mm) Galvanized Steel Box Track 9599-71 71" (1803 mm) Galvanized Steel Box Track9599-95 95" (2413 mm) Galvanized Steel Box Track9599-119 119" (3023 mm) Galvanized Steel Box Track 9599-143 143" (3632 mm) Galvanized Steel Box Track 9601-35 35" (889 mm) Aluminum Box Track 9601-47 47" (1194 mm) Aluminum Box Track 9601-59 59" (1499 mm) Aluminum Box Track 9601-71 71" (1803 mm) Aluminum Box Track 9601-96 96" (2438 mm) Aluminum Box Track 9601-120 120" (3048 mm) Aluminum Box Track 9601-144 144" (3658 mm) Aluminum Box Track
Part # Description
9569 1 each 9572 Hanger, 9618 Pivot Set, 9559 Aligner, 9558 Knob & 9815 Bumper Stop, 3 each 9220 Hinge
9571 1 each 9572 Hanger, 9618 Pivot Set, 9559 Aligner, 9558 Knob & 9815 Bumper Stop
Part # Description
9121 Bottom Guide for 91229122 Bottom Track 3/4" (19 mm) wide x 5/8" (16 mm) tall x 0.062" (1.6 mm) thick –
up to 192" (4877 mm) long9220 Non-Mortise Bi-Fold Hinge with Screws9572 4 Wheel Ball Bearing Hanger and Top Mount Bracket 9558 Wood Knob with Screw9559 Aligner9815 Bumper Stop 9618 Pivot Set
800-325-9995www.hagerco.com
Sliding DoorBi-Fold
14 800-325-9995www.hagerco.com
Heavy Duty Aluminum Box Track & Hardware
9800 Series Conforms to ANSI A156.14/Type: D8621, D8641, D8651, D8661
• For 13⁄8" (35 mm) to 13⁄4" (44 mm) doors • Up to 125 lbs. (57 kg) per panel Bi-Fold• Up to 75 lbs. (34 kg) per panel Multi-Fold• Quick release hangers allow easy door hanging and removal • Hangers interchange with Stanley & Johnson track and hangers• Universal extruded aluminum track interchanges with Stanley & Johnson track and hangers• Hangers have 1" (25.4 mm) diameter wheels
Packaged Sets
Interchanges with:• Stanley 125/250 Series• Johnson 100 Series
9860 Sets Include 9821 Track, 9894 Parts Bag & 3 each 1741 31/2" x 31/2" 2D Hinges Part # Description
9860-30 30" (762 mm) Opening for 2 Doors 9860-36 36" (914 mm) Opening for 2 Doors 9860-48 48" (1219 mm) Opening for 2 Doors
9861 Sets Include 9821 Track, 2 each 9894 Parts Bag & 6 each 1741 31/2" x 31/2" 2D HingesPart # Description
9861-48 48" (1219 mm) Opening for 4 Doors 9861-60 60" (1524 mm) Opening for 4 Doors 9861-71 71" (1803 mm) Opening for 4 Doors9861-96 96" (2438 mm) Opening for 4 Doors
Part # Description
9821-59 59" (1499 mm) Heavy Duty Aluminum Box Track9821-71 71" (1803 mm) Heavy Duty Aluminum Box Track9821-96 96" (2438 mm) Heavy Duty Aluminum Box Track9821-144 144" (3658 mm) Heavy Duty Aluminum Box Track
Track
Parts Bags
Components (sold separately)
Part # Description
9894 1 each 9825 4 Wheel Ball Bearing Hangers with Quick Release Top Mount Plate, 1 each 9828 Bi-Fold Pivot Set with 9815 Bumper Stop
98210.06" (1.5 mm) thick aluminum
Part # Description
9825 4 Wheel Ball Bearing Hanger with Quick Release Top Mount Plate9828 Heavy Duty Pivot Set with 9815 Bumper Stop 9815 Bumper Stop9559 Aligner9121 Bottom Guide for 91229122 Bottom Track 3/4" (19 mm) wide x 5/8" (16 mm) tall x 0.062" (1.6 mm) thick –
up to 192" (4877 mm) long9558 Wood Knob with Screw 9220 Non-Mortise Bi-Fold Hinge with Screws1741 31/2" x 31/2" US2D Loose Pin Hinges - Brass Tone
Sliding DoorBi-Fold
15800-325-9995www.hagerco.com
Heavy Duty Aluminum Box Track & Hardware
9870 Series Conforms to ANSI A156.14/Type: D8621, D8641, D8651, D8661
• For doors 11⁄ 8" (29 mm) to 13⁄4" (44 mm) thick • Up to 125 lbs. (57 kg) per panel Bi-Fold• Up to 75 lbs. (34 kg) per panel Multi-Fold• Track is extruded aluminum jump-proof style with ‘‘V’’ shaped rails• Hangers have four 11⁄4" (32 mm) diameter wheels• Top and bottom pivots are heavy duty with ball bearing bottom socket assembly for smooth, long lasting operation
Packaged Sets
Track
Compares to:• Grant 1600R Series• Johnson 100FD Series• Lawrence 570 Track
ED620/640 Sets
Interchanges with:• Stanley 2916-R, 58, 2711,
BF125,2700, 40-2225 Series
Components (sold separately)
*Installation note: Clearance between door bottom and top of 9122 trackmust be 5/8" (16 mm) min. to 1" (25.4 mm) max.
Note: The 9870 Series will be replaced by the 9800 Series (see page 14)and the 9890 Series (see page 16).
98010.075" (1.9 mm) thick aluminum
9870 Sets Include 9801 Track, 9817 Hangers, 9818 Pivot(s), 9815 Bumper Stop(s) & 1741 31/2" x 31/2" 2D Hinges (3 each for 2 door, 6 each for 4 door) Part # Description
9870-30 30" (762 mm) Opening for 2 Doors9870-36 36" (914 mm) Opening for 2 Doors9870-48 48" (1219 mm) Opening for 2 Doors 9871-48 48" (1219 mm) Opening for 4 Doors 9871-60 60" (1524 mm) Opening for 4 Doors 9871-72 72" (1829 mm) Opening for 4 Doors 9871-96 96" (2438 mm) Opening for 4 Doors
Part # Description
9801-72 72" (1829 mm) Aluminum Box Track9801-96 96" (2438 mm) Aluminum Box Track 9801-120 120" (3048 mm) Aluminum Box Track 9801-144 144" (3658 mm) Aluminum Box Track 9801-192 192" (4877 mm) Aluminum Box Track
Part # Description
9121 Bottom Guide for 91229122 Bottom Track 3/4" (19 mm) wide x 5/8" (16 mm) tall x 0.062" (1.6 mm) thick –
up to 192" (4877 mm) long 1741 31/2" x 31/2" US2D Loose Pin Hinges - Brass Tone9558 Wood Knob with Screw 9559 Aligner 9817 4 Wheel Ball Bearing Hanger with Top Mount Plate 9815 Bumper Stop 9818 Pivot Set
Sliding DoorBi-Fold
16 800-325-9995www.hagerco.com
Heavy Duty Aluminum Box Track & Hardware
9890 Series Conforms to ANSI A156.14/Type: D8621, D8641, D8651, D8661
• For panels 11⁄8" (29 mm) to 13⁄4" (44 mm) thick• Quick Release Hanger allows easy door hanging and removal• Up to 125 lbs. (57 kg) per panel Bi-Fold• Up to 75 lbs. (34 kg) per panel Multi-Fold• Track is extruded aluminum jump-proof style with “V” shaped rails• Hangers have four 11⁄4" (32 mm) diameter wheels • Top and bottom pivots are heavy duty with ball bearing bottom socket assembly for smooth, long lasting operation• Note: 9890 Series requires 1741 loose pin hinges – included
Packaged Sets
Track
Compares to:• Grant 1260 Series• Johnson 100FD Series• Lawrence 570 Track,
ED620/640 Sets• Stanley 2916-R, 58, 2711, BF125
Components (sold separately)
9870 Sets Include 9801 Track, 9827 Hangers, 9828 Pivots & 1741 31/2" x 31/2" 2D Hinges(3 each for 2 door, 6 each for 4 door)Part # Description
9890-30 30" (762 mm) Opening for 2 Doors 9890-36 36" (914 mm) Opening for 2 Doors 9890-48 48" (1219 mm) Opening for 2 Doors 9891-48 48" (1219 mm) Opening for 4 Doors 9891-60 60" (1524 mm) Opening for 4 Doors 9891-72 72" (1829 mm) Opening for 4 Doors 9891-96 96" (2438 mm) Opening for 4 Doors
Part # Description
9801-72 72" (1829 mm) Aluminum Box Track 9801-96 96" (2438 mm) Aluminum Box Track 9801-120 120" (3048 mm) Aluminum Box Track 9801-144 144" (3658 mm) Aluminum Box Track 9801-192 192" (4877 mm) Aluminum Box Track
Part # Description
9121 Bottom Guide for 91229122 Bottom Track 3/4" (19 mm) wide x 5/8" (16 mm) tall x 0.062" (1.6 mm) thick –
up to 192" (4877 mm) long9827 4 Wheel Ball Bearing Hanger with Quick Release Top Mount Plate9828 Heavy Duty Pivot Set with 9815 Bumper Stop 9558 Wood Knob with Screw 9559 Aligner9815 Bumper Stop 9566 Door Knob with Screws 11/8" (29 mm) diameter – Bright Brass9567 Rose for 9566 13/4" (44 mm) diameter – Bright Brass1741 31/2" x 31/2" 2D Loose Pin Hinges – Brass Tone
*Installation note: Clearance between door bottom and top of 9122 trackmust be 5/8" (16 mm) min. to 1" (25.4 mm) max.
98010.075" (1.9 mm) thick aluminum
Sliding DoorBi-Fold
17800-325-9995www.hagerco.com
Heavy Duty Aluminum I-Beam Track & Hardware
9100 Series Conforms to ANSI A156.14/Type: D8621, D8641, D8651, D8661
• For doors 1" (25.4 mm) to 13⁄4" (44 mm) thick• Up to 125 lbs. (57 kg) per panel Bi-Fold• Up to 75 lbs. (34 kg) per panel Multi-Fold• Track is extruded aluminum jump-proof style with “I” beam track• Hangers have four 1" (25.4 mm) diameter wheels• Top and bottom pivots are heavy duty with solid brass bottom socket assembly for smooth, long lasting operation• Note: Loose pin full mortise hinges 1741/1279 recommended – not included (3 required for 9162, 6 required for 9164)
Packaged Sets
Track
Compares to:• Grant 1260 Series• Johnson 200FD
Parts Bags
Components (sold separately)
9101
9162 Sets Include 9101 Track & 9160 Parts Bag 9164 Sets Include 9101 Track & 2 each 9160 Parts Bag Part # Description
9162-48 48" (1219 mm) Opening for 2 Doors9162-60 60" (1524 mm) Opening for 2 Doors 9162-72 72" (1829 mm) Opening for 2 Doors 9164-48 48" (1219 mm) Opening for 4 Doors 9164-60 60" (1524 mm) Opening for 4 Doors 9164-72 72" (1829 mm) Opening for 4 Doors 9164-96 96" (2438 mm) Opening for 4 Doors 9164-120 120" (3048 mm) Opening for 4 Doors 9164-144 144" (3658 mm) Opening for 4 Doors
Part # Description
9101-72 72" (1829 mm) Aluminum I-Beam Track9101-84 84" (2134 mm) Aluminum I-Beam Track 9101-96 96" (2438 mm) Aluminum I-Beam Track 9101-120 120" (3048 mm) Aluminum I-Beam Track 9101-144 144" (3658 mm) Aluminum I-Beam Track 9101-192 192" (4877 mm) Aluminum I-Beam Track
Part # Description
9105 4 Wheel Ball Bearing Hanger 9111 Bottom Roller Guide 9121 Bottom Guide for 91229122 Bottom Track 3/4" (19 mm) wide x 5/8" (16 mm) tall x 0.062"
(1.6 mm) thick - up to 192" (4877 mm) long9128 Bottom Pivot Bolt and Door Plate with Bottom Pivot Floor Bracket9155 Top Pivot Clamp Assembly 9169 Top Pivot Assembly
Part # Description
9160 1 each 9105 Hanger, 9128 Bottom Pivot Bolt and Door Plate with Bottom Pivot Floor Bracket, 9169 Top Plate & 9155 Top Pivot Assembly
9126 Same as above without 9105 Hanger
*Installation note: Clearance between door bottom and top of 9122 trackmust be 5/8" (16 mm) min. to 1" (25.4 mm) max.
9105 9111
916991559122
9128
9121
Sliding DoorPocket
18 800-325-9995www.hagerco.com
9102 9105 9111 9112 9113
9114 91219115 9122
9884
9102 9105 9111 9112 9113
9114 91219115 9122
9884
Extra Heavy Duty Aluminum I-Beam Track & Hardware
9110 Series Conforms to ANSI A156.14/Type: D8681, D8711
• For doors 1" (25.4 mm) to 13⁄4" (44 mm) thick• Up to 175 lbs. (79 kg) per door with 9102 hanger• Up to 275 lbs. (125 kg) per door with 9105 hanger• Track is extruded aluminum jump-proof style with “I” beam track • Hangers have 1" (25.4 mm) diameter wheels
Packaged Sets
Track
Compares to:• Grant 1210/1230 Series
Parts Bags
Components (sold separately)
9101
*Installation note: Clearance between door bottom and top of 9122 trackmust be 5/8" (16 mm) min. to 1" (25.4 mm) max.
9110 Sets Include 9101 Track & 9109 Parts Bag Part # Description
9110-60 5' (1524 mm) Pocket Door Set for 2'6" (762 mm) Door9110-72 6' (1829 mm) Pocket Door Set for 3'0" (914 mm) Door9110-84 7' (2134 mm) Pocket Door Set for 3'6" (1067 mm) Door9110-96 8' (2438 mm) Pocket Door Set for 4'0" (1219 mm) Door9110-144 12' (3658 mm) Pocket Door Set for 6'0" (1829 mm) Door
9130 Sets Include 9101 Track & 9129 Parts BagPart # Description
9130-60 5' (1524 mm) Track Set for 2'6" (762 mm) Door 9130-72 6' (1829 mm) Track Set for 3'0" (914 mm) Door 9130-120 10' (3048 mm) Track Set for 5'0" (1524 mm) Door 9130-132 11' (3353 mm) Track Set for 5'6" (1676 mm) Door 9130-144 12' (3658 mm) Track Set for 6'0" (1829 mm) Door
Part # Description
9101-72 72" (1829 mm) Aluminum I-Beam Track 9101-84 84" (2134 mm) Aluminum I-Beam Track 9101-96 96" (2438 mm) Aluminum I-Beam Track9101-120 120" (3048 mm) Aluminum I-Beam Track 9101-144 144" (3658 mm) Aluminum I-Beam Track 9101-192 192" (4877 mm) Aluminum I-Beam Track
Part # Description
9102 2 Wheel Hanger - for 175 lbs. (79 kg) Door 9105 4 Wheel Hanger - for 275 lbs. (125 kg) Door 9111 Bottom Guide - Fixed 9112 Stop - used with 9102 Hanger 9113 Stop - used with 9105 Hanger 9114-72 72" (1828 mm) Bottom Guide Rail - Extruded Aluminum 9114-96 96" (2438 mm) Bottom Guide Rail - Extruded Aluminum 9114-144 144" (3658 mm) Bottom Guide Rail - Extruded Aluminum9115 Bottom Guide 9121 Bottom Door Guide - Adjustable9122 Bottom Track 3/4" (19 mm) wide x 5/8" (16 mm) tall x 0.062" (1.6 mm) thick –
up to 192" (4877 mm) long9884 Edge Pull
Part # Description9109 2 each 9102 2 Wheel Hangers, 9115 Floor Guide 9129 2 each 9105 4 Wheel Hangers, 9115 Floor Guide
Sliding DoorPocket
19800-325-9995www.hagerco.com
Heavy Duty Aluminum Box Track & Hardware
9601 Series Conforms to ANSI A156.14/Type: D8681, D8711
• For doors 11⁄8" (29 mm) to 13⁄4" (44 mm) thick• Up to 125 lbs. (57 kg) per door with 9605 hanger• Up to 150 lbs. (68 kg) per door with 9606 hanger• Track is extruded aluminum jump-proof style with ‘‘V’’ shaped rails• Hangers have four 7⁄ 8" (22 mm) diameter wheels for 9605 and wheels mounted
on ball bearing shafts for 9606
Packaged Sets
Recommended Header Dimensions
Track
Compares to:• Stanley 40-3855 and 1752 Series, PDC150• Johnson 100/111 Series• Grant 7000 Series• Lawrence 506 and 580 Track
Parts Bags
Components (sold separately)
96010.05" (1.3 mm) thick aluminum
Part # Description
9632 2 each 9605 Hanger, 9609 Plate & 9883 Guide, 1 each 9881 Bumper 9633 2 each 9606 Hanger, 9609 Plate & 9883 Guide, 1 each 9881 Bumper
Part # Description
9601-47 47" (1194 mm) Aluminum Box Track 9601-55 55" (1397 mm) Aluminum Box Track 9601-59 59" (1499 mm) Aluminum Box Track 9601-63 63" (1600 mm) Aluminum Box Track 9601-71 71" (1803 mm) Aluminum Box Track 9601-96 96" (2438 mm) Aluminum Box Track 9601-120 120" (3048 mm) Aluminum Box Track 9601-144 144" (3658 mm) Aluminum Box Track
Part # Description
330D Passage Pull for Doors 13/8" (35 mm) to 13/4" (44 mm) 330L Privacy Lock for 13/8" (35 mm) Door330M Privacy Lock for 13/4” (44 mm) Door2630 21/8" (54 mm) Pull9605 4 Wheel Hanger for 125 lb. (57 kg) Door 9606 4 Wheel Ball Bearing Hanger for 150 lb. (68 kg) Door9609 Top Mount Door Plate for 9605 & 9606 Hangers 9815 Bumper Stop 9881 Bumper 9883 Pocket Door Guides - Use 2 per Door 9884 Edge Pull 9889 Pocket Door Guides - Use 1 per Door
9678 Sets Include 9601 Track & 9632 Parts Bag Part # Description
9678-72 72" (1829 mm) Pocket Door Set for 3' (914 mm) Door 9678-96 96" (2438 mm) Pocket Door Set for 4' (1219 mm) Door
Sliding DoorPocket
20 800-325-9995www.hagerco.com
Heavy Duty Aluminum I-Beam Track & Hardware
9701 Series Conforms to ANSI A156.14/Type: D8681, D8711
• For doors 11⁄8" (29 mm) thick and up• Up to 125 lbs (57 kg) per door• Track is extruded aluminum with jump-proof style twin ‘‘V’’ shaped rails • Hangers have four 7⁄ 8" (22 mm) diameter wheels • Vertical adjustment does not require boring of door
Packaged Sets
Recommended Header Dimensions
Track
Compares to:• Grant 7000 Series
Interchanges with:• Stanley 1710 Track,
1720-Bx Hdw., 2842-R Set• Cox 15-200 Series
Parts Bags
Components (sold separately)
97010.05" (1.3 mm) thick aluminum
Part # Description9779 2 each 9704 Hanger, 9609 Plate & 9877 Guide, 1 each 9881 Bumper
Part # Description
9701-47 467/8" (1191 mm) Aluminum I-Beam Track 9701-55 547/8" (1394 mm) Aluminum I-Beam Track 9701-59 587/8" (1495 mm) Aluminum I-Beam Track9701-63 627/8" (1597 mm) Aluminum I-Beam Track 9701-71 707/8" (1800 mm) Aluminum I-Beam Track 9701-95 947/8" (2410 mm) Aluminum I-Beam Track 9701-120 120" (3048 mm) Aluminum I-Beam Track 9701-144 144" (3658 mm) Aluminum I-Beam Track
Part # Description
330D Passage Pull for Doors 13/8" (35 mm) to 13/4" (44 mm) 330L Privacy Lock for 13/8" (35 mm) Door 330M Privacy Lock for 13/4" (44 mm) Door2630 21/8" (54 mm) Pull9704 4 Wheel Hanger Only 9609 Top Mount Door Plate for 9704 9815 Bumper Stop 9881 Bumper 9883 Pocket Door Guide - Use 2 per Door 9877 Door Guide - Use 2 per Door9884 Edge Pull9889 Pocket Door Guide - Use 1 per Door
9778 Sets Include 9701 Track & 9779 Parts Bag Part # Description
9778-72 72" (1829 mm) Pocket Door Set for 3' (914 mm) Door 9778-96 96" (2438 mm) Pocket Door Set for 4' (1219 mm) Door
Sliding DoorPocket
21800-325-9995www.hagerco.com
Extra Heavy Duty Aluminum Box Track & Hardware
9801 Series Conforms to ANSI A156.14/Type: D8681, D8711
• For doors 13⁄ 8" (35 mm) thick and up• Up to 250 lbs (113 kg) per door• Track is extruded aluminum jump-proof style with ‘‘V’’ shaped rails• Hangers have four 11⁄4" (32 mm) diameter wheels
Packaged Sets
Track
Compares to:• Grant 1200 Series• Lawrence 570 Track• Stanley BP250
Interchanges with:• Stanley 57/58
Parts Bags
Components (sold separately)
98010.075" (1.9 mm) thick aluminum
Part # Description9742 2 each 9816 Hangers & 9883 Guide, 1 each 9881 Bumper
Part # Description
9801-72 72" (1829 mm) Aluminum Box Track 9801-96 96" (2438 mm) Aluminum Box Track 9801-120 120" (3048 mm) Aluminum Box Track 9801-144 144" (3658 mm) Aluminum Box Track9801-192 192" (4877 mm) Aluminum Box Track
Part # Description
330D Passage Pull for Doors 13/8" (35 mm) to 13/4" (44 mm) 330L Privacy Lock for 13/8" (35 mm) Door330M Privacy Lock for 13/4" (44 mm) Door2630 21/8" (54 mm) Pull9816 4 Wheel Ball Bearing Hanger with 9609 Top Mount Bracket 9815 Bumper Stop 9881 Bumper 9883 Pocket Door Guide - Use 2 per Door 9884 Edge Pull 9889 Pocket Door Guide - Use 1 per Door
9878 Sets Include 9801 Track & 9742 Parts Bag Part # Description
9878-72 72" (1829 mm) Pocket Door Set for 3' (914 mm) Door 9878-96 96" (2438 mm) Pocket Door Set for 4' (1219 mm) Door
Sliding DoorPocket
22 800-325-9995www.hagerco.com
Extra Heavy Duty Aluminum Box Track & Hardware
9903 Series Conforms to ANSI A156.14/Type: D8681
• For 13⁄8" (35 mm) to 13⁄4" (44 mm) doors• Up to 250 lbs (113 kg) per door• Quick release hangers allow easy door hanging and removal • Hangers interchange with Stanley & Johnson track and hangers• Universal extruded aluminum track interchanges with Stanley & Johnson track and hangers• Hangers have 1" (25.4 mm) diameter wheels
Packaged Sets
Interchanges with:• Stanley 125/250 Series• Johnson 100 Series
9901 Sets Include 9821 Track & 9895 Parts BagPart # Description
9901-72 71" (1803 mm) Pocket Set for 3'0" (914 mm)9901-96 96" (2438 mm) Pocket Set for 4'0" (1219 mm)
Part # Description
9821-59 59" (1499 mm) Aluminum Box Track9821-71 71" (1803 mm) Aluminum Box Track9821-96 96" (2438 mm) Aluminum Box Track9821-144 144" (3658 mm) Aluminum Box Track
Track
Parts Bags
Components (sold separately)
Part # Description
9895 2 each 9825 4 Wheel Ball Bearing Hangers with Quick Release Top Plate, & 9883 Guides, 1 each 9881 Bumper
98210.06" (1.5 mm) thick aluminum
Part # Description
330D Passage Pull for Doors 13/8" (35 mm) to 13/4" (44 mm) 330L Privacy Lock for 13/8" (35 mm) Door 2630 21/8" (54 mm) Pull9559 Aligner9815 Bumper Stop 9825 4 Wheel Ball Bearing Hanger with Quick Release Top Mount Plate9884 Edge Pull9881 Bumper 9883 Pocket Door Guide - Use 2 per Door 9889 Pocket Door Guide - Use 1 per Door
Sliding DoorPocket Door Kit
Heavy Duty Pocket Door Kit
9628, 9629, 9630, 9631 Series Conforms to ANSI A156.14/Type: D8671, D8701
• Jump proof track and rollers• 9599 Galvanized steel box track• Pre-assembled header assembly goes up quickly• Easy door installation and removal for painting and repair• Real wood split studs, size 3⁄ 4" (19 mm) x 15⁄ 8" (26 mm) length relative to height, steel encased for rigidity and to prevent fastener
penetration into the pocket• Track header unit attaches to rough framing at both ends. Split studs nail or screw to track header. No connections to rough header.• 2 pair of split studs with wood inserts
Packaged Sets
Compares to:• Stanley 40-3925/PDF150• National 882• Johnson 153068PF
Components (sold separately)
Model Max. Door Door Door Door HangerWeight Thickness* Width Height Bearings
9631 125 lbs 13⁄ 8" – 13⁄4" 3'0" 6'8" Molded (57 kg) (35-45 mm) (914 mm) (2032 mm) Celcon
9628 150 lbs 13⁄ 8" – 13⁄4" 3'0" 9'0" Steel(68 kg) (35-45 mm) (914 mm) (2743 mm) Ball
9629 150 lbs 13⁄ 8" – 13⁄4" 3'0" 8'0" Steel(68 kg) (35-45 mm) (914 mm) (2438 mm) Ball
9630 150 lbs 13⁄ 8" – 13⁄4" 3'0" 7'0" Steel(68 kg) (35-45 mm) (914 mm) (2134 mm) Ball
9850 250 lbs 13⁄ 8" – 13⁄4" 4'0" 8'0" Steel(57 kg) (35-45 mm) (1219 mm) (2438 mm) Ball
Installation note: For Bi-Parting Doors use Hager Double Pocket Door Kit 9639(sold separately)
Joins 2 pocket door frames to make one large doorway. Rough opening widthchanges to 4 times one door width.
* 9634 Adapter Kit recommended for 13/4" (45 mm) doors
Part # Description
330D Passage Pull 13/8" (35 mm) to 13/4" (44 mm) Door330L Privacy Lock 13/8" (35 mm) Door330M Privacy Lock 13/4" (44 mm) Door2610 3/4" (19 mm) Pull2630 21/8" (54 mm) Pull9865 13/4" (44 mm) Tan Plastic Pull9606 Ball Bearing Hanger9609 Door Hanger Plate9632 Hanger Replacement set includes hangers, plates, guides,
bumper, adjustable wrench, screws & instructions9633 Same as 9632 with Ball Bearing Hangers9634 Adapter Kit for 13/4" (44 mm) doors. Includes wider floor plates
& (4) shims for spacing split studs for add. clearance (Standard clearance is 1/8" (79 mm) on each side of door)
9639 Bi-Parting Double Door Kit Includes Connector Plates & Bumper Stops
9881 Bumper9883 Pocket Door Guides - use 2 per door9884 Edge Pull9889 Door Guide
Kit Contains:Quantity Description Quantity Description
1 Header Assembly 1 Pair of Door Guides2 Pair of Split Studs 1 Adjusting Wrench2 Heavy Duty Hangers 2 Floor Plates2 Door Hanger Plates 1 End Bracket1 Bumper
23800-325-9995www.hagerco.com
Sliding DoorPocket Door Kit
24 800-325-9995www.hagerco.com
Extra Heavy Duty Pocket Door Kit
9850 Series Conforms to ANSI A156.14/Type: D8671, D8701
• For doors: 13⁄ 8" to 13⁄ 4" (35 to 44 mm) thick, up to 4'0" (1219 mm) wide and 8'0" (2438 mm) or 8'6" (2591 mm) high, weighing up to 250 lbs. (112 kg)
• Jump proof track and rollers• 9801 Heavy duty aluminum box track• Pre-assembled header assembly goes up quickly• Easy door installation and removal for painting and repair• Real wood split studs, size 3⁄ 4" (19 mm) x 15⁄ 8" (26 mm) length relative to height, steel encased for rigidity and to prevent fastener
penetration into the pocket• Track header unit attaches to rough framing at both ends. Split studs nail or screw to track header. No connections to rough header.• 3 pair of split studs with wood inserts
Packaged Sets
Compares to:• Stanley PDF250• Lawrence PF619
Components (sold separately)
Installation note: For Bi-Parting Doors use Hager Double Pocket Door Kit 9639(sold separately)
Joins 2 pocket door frames to make one large doorway. Rough opening widthchanges to 4 times one door width.
Part # Description
330D Passage Pull 13/8" (35 mm) to 13/4" (44 mm) Door330L Privacy Lock 13/8" (35 mm) Door330M Privacy Lock 13/4" (44 mm) Door2610 3/4" (19 mm) Pull2630 21/8" (54 mm) Pull9865 13/4" (44 mm) Tan Plastic Pull9639 Bi-Parting Double Door Kit Includes Connector Plates &
Bumper Stops9816 Ball Bearing Hanger with Plate9889 Door Guide9883 Pocket Door Guides - use 2 per door9884 Edge Pull9881 Bumper
Kit Contains:Quantity Description Quantity Description
1 Header Assembly 1 Pair of Door Guides2 Pair of Split Studs 1 Adjusting Wrench2 Heavy Duty Hangers 2 Floor Plates2 Door Hanger Plates 1 End Bracket1 Bumper
Sliding DoorComponents
25800-325-9995www.hagerco.com
I-Beam TrackFor use on by-pass, bi-fold and pocket applications
9101 Material: Extruded AluminumGauge: 0.125" (3 mm)Lengths: 72" (1829 mm) to 192"
(4877 mm)Note: Mounting holes are pre-punched
for ease of installation
2-Wheel Hanger with Adjusting Bolt and Top PlateFor use on by-pass and pocket applications
9102 Material: Zinc Plated SteelWheels: Nylon with Steel Ball BearingsHanger: 13⁄16" x 2" x 11⁄ 8"
(46 x 51 x 29 mm)Bolt: 3⁄ 8" x 25⁄16" (10 x 59 mm)
(Bolt not same as 9105)Top Plate: 1" x 31⁄ 2" x 3⁄16"
(25.4 x 89 x 5 mm)Note: Use with 9101 track, with doors
weighing up to 175 lbs. (79 kg)
Bottom Roller GuideFor use on by-pass, bi-fold and pocket applications
9111 Material: Zinc Plated Steel with Bronze RollerGuide: 2" x 3⁄ 4" x 3⁄ 32" (51 x 19 x 2.4 mm)Roller: 17⁄ 32" x 1⁄ 2" (13.5 x 13 mm)Notes: • Door mortising is not required
• Use with 9122 guide channel
StopFor use on by-pass and pocket applications to stop hangers
9112 Material: Aluminum and RubberStop: 15⁄ 8" x 11⁄ 2" x 5⁄ 8" x 7⁄ 8"
(41 x 38 x 16 x 22 mm)Note: Use with 9102 hanger
StopFor use on by-pass and pocket applications to stop hangers
9113 Material: Aluminum and RubberStop: 15⁄ 8" x 11⁄ 2" x 5⁄ 8" x 13⁄4"
(41 x 38 x 16 x 45 mm)Note: Use with 9105 hanger
Continuous Bottom GuideFor use on by-pass and pocket applications
9114 Material: AluminumGuide: 7⁄ 8" x 1⁄ 2" (22 x 12.5 mm)Lengths: 72" (1829 mm) to 144" (3658 mm)Notes: • Door bottom prep requires
1⁄ 4" (6.4 mm) wide kerf and9⁄16" (14 mm) depth
• Pre-punched for use with flathead screws
Bottom GuideFor use on by-pass and pocket applications
9115 Material: Die Cast Zinc Aluminum AlloyGuide: 7⁄ 8" x 3⁄ 4" x 3" (22 x 19 x 76 mm)Note: Door bottom prep requires
1⁄ 4" (6.4 mm) wide kerf and9⁄16" (14 mm) depth
Bottom Guide ChannelFor use on by-pass and bi-fold applications
9122 Material: Extruded AluminumGauge: 0.093 (2.4 mm)Lengths: 48" (1219 mm) to 192" (4877 mm)Channel: 5⁄ 8" x 3⁄ 4" (16 x 19 mm)Notes: • Screws not provided
• Mortised into floor or surfacemounted
Adjustable Bottom Door GuideFor use on by-pass and bi-fold applications
9121 Material: Zinc Plated Steel with Bronze RollerGuide: 1" x 31⁄ 2" x 3⁄16" (25.4 x 89 x 5 mm) Post: 21⁄ 2" x 5⁄16" (64 x 8 mm)Note: Use with 9122 guide channel
4-Wheel Hanger with Adjusting Bolt and Top PlateFor use on by-pass, bi-fold and pocket applications
9105 Material: Zinc Plated SteelWheels: Nylon with Steel Ball BearingsHanger: 4" x 2" x 13⁄4" (102 x 51 x 45 mm)Bolt: 3⁄ 8" x 25⁄16" (10 x 59 mm)Top Plate: 1" x 31⁄ 2" x 3⁄16"
(25.4 x 89 x 5 mm)Notes: • Use with 9101 track, with doors
weighing up to 275 lbs. (125 kg)• Four wheel hanger is self-aligning
to allow consistent contact with track
Sliding DoorComponents
26 800-325-9995www.hagerco.com
Top Pivot Clamp AssemblyFor use on bi-fold applications
9155 Material: Aluminum Body, Brass Bushing, Rubber Bumper
Plate: 13⁄ 8" x 2" (35 x 51 mm)Note: Top pivot clamp assembly is
clamped to track next to jamb
Bottom Pivot SetFor use on heavy duty bi-fold applications
9128 Material: Zinc Plated SteelBolt: 3⁄ 8" x 215⁄ 16" (10 x 59 mm)Plate: 13⁄ 8" x 31⁄ 2" (35 x 89 mm)Note: Bottom pivot bolt and door plate
with bottom pivot floor bracket
Bi-Fold Door HingeFor use on bi-fold applications
9220 Material: Steel with Brass-Tone Dichromate Finish
Hinge: 3" x 1" (76 x 25.4 mm)HoleLocations: 1⁄ 2" (12.5 mm) from the
center lines of holes to center of barrel
Notes: • For use on doors 7⁄ 8"(22 mm) or more thick
• Non-mortise and easy to install
Pocket Door Keyed LockFor use on pocket door applications
9262 Material: Steel Notes: • Lock cylinder fits in one
1" (25.4 mm) hole• Available keyed alike• For doors 13⁄ 8" (35 mm) to
13⁄4" (44 mm) thick
Bi-Fold Door Keyed LockFor use on bi-fold applications
9264 Material: Steel Notes: • Lock cylinder fits in one
3⁄ 4" (19 mm) hole• Available keyed alike• For doors 3⁄ 4" (19 mm) to
13⁄8" (35 mm) thick
Top Pivot AssemblyFor use on bi-fold applications
9169 Material: Zinc Plated SteelTop Pivot: 1" x 31⁄ 2" x 17⁄16"
(25.4 x 89 x 37 mm)Note: Inserts into 9155 Top Pivot Clamp
Assembly
Single Wheel HangerFor use on by-pass applications
9200 "A" offset: 3/8" (9.5 mm)
9201 "B" offset: 11/16" (17.5 mm)
Material: Zinc Plated Steel with Molded Celcon Wheels
Gauge: 0.075" (2 mm)Wheel: 7⁄ 8" (22 mm) DiameterNotes: • For use on doors weighing up to
60 lbs. (27 kg)• For use with 9810, 9820, 9830
and 9840 track• Side mounted with slot adjust offset• Hanger is stamped "A" or "B" for
easy identification
Single Wheel HangerFor use on by-pass applications
9202 "B" offset: 11/16" (17.5 mm)
9203 "A" offset: 3/8" (9.5 mm)
Material: Zinc Plated Steel with Molded Celcon Wheels
Gauge: 0.075" (2 mm)Wheel: 7⁄ 8" (22 mm) DiameterNotes: • For use on doors weighing up to
60 lbs. (27 kg)• For use with 9810, 9820, 9830
and 9840 track• Side mounted with slot adjust offset• Hanger is stamped "A" or "B" for
easy identification
By-Pass Door Keyed LockFor use on by-pass applications
9268 Material: Steel Notes: • Lock cylinder fits in one
1" (25.4 mm) hole • Available keyed alike• For doors 3⁄ 4" (19 mm) to
13⁄4" (44 mm) thick
Tan Plastic Floor GuideFor use on by-pass applications
9351 Material: High Density PolyethyleneGuide: 49⁄16" x 1" x 113⁄16"
(116 x 25.4 x 46 mm)Note: One piece fixed guide for 13⁄ 8"
(35 mm) doors
Sliding DoorComponents
27800-325-9995www.hagerco.com
Galvanized Steel Box TrackFor use on by-pass, bi-fold and pocket applications
9599 Material: Galvanized SteelGauge: 0.030" (0.8 mm)Track: 11⁄16" x 13⁄8" (27 x 35 mm) Lengths: 36" (914 mm) to 144" (3657 mm)Notes: • Refer to series pages for
weight capacities• The twin channel design is
jump proof
Track Spacer KitFor use on by-pass applications
9574 Material: Celcon PlasticNotes: • Includes screws
• Properly spaces two singletracks for 13⁄ 4" (44 mm) doors
• For use with 9801 and9599 track
Track Spacer KitFor use on by-pass applications
9573 Material: Celcon PlasticNotes: • Includes screws
• Properly spaces two singletracks for 13⁄ 4" (44 mm) doors
• For use with 9821 track
Four Wheel HangerFor use on by-pass and bi-fold applications
9572 Material: Steel with Brass-tone Dichromate Finish and Celcon Wheels
Wheel: 7⁄8" (22 mm) Diameter Notes: • Wheels are self aligning to allow
consistent contact with track • Pre-lubricated Celcon wheels • Includes wrench• For use on doors weighing
up to 100 lbs. (45 kg) each• For use with 9599, 9601, 9602,
and 9603 track
AlignerFor use on four door bi-fold applications
9559 Material: Steel with Brass-tone Dichromate Finish
Notes: • Keeps lead doors aligned when closed
• Use one on each lead door
Carpet RiserFor use on by-pass applications
9354 Material: Steel with Brass-tone Dichromate Finish
Rise: 3⁄ 4" (19 mm) Note: For mounting 9351 and 9353
Floor Guides over carpeting
Tan Plastic Adjustable Floor GuideFor use on by-pass applications
9353 Material: High Density PolyethyleneNote: Adjustable guide from
3⁄ 4" (19 mm) to 13⁄ 8" (35 mm)
Micro Adjust HangerFor use on by-pass applications
9400 "A" offset: 3/8" (9.5 mm)
9401 "B" offset: 11/16" (17.5 mm)
Material: Zinc Plated Steel with Molded Celcon Wheels
Gauge: 0.075" (2 mm)Wheel: 7⁄ 8" (22 mm) DiameterNotes: • Side mounted with precise
cam adjustment• Hanger is stamped "A" or "B"
for easy identification• For use on doors weighting
up to 60 lbs. (27 kg)• For use with 9810, 9820,
9830 and 9840 track Aluminum Box TrackFor use on by-pass, bi-fold and pocket applications
9601 Material: Extruded AluminumGauge: 0.050" (1.3 mm)Track: 11⁄16" x 13⁄8" (27 x 35 mm) Lengths: 35" (889 mm) to 144" (3657 mm)Notes: • Refer to series pages for
weight capacities• Jump proof twin channel design
Heavy Duty Aluminum Double Box TrackFor use on by-pass applications
9602 Material: Extruded AluminumGauge: 0.050" (1.3 mm) Track: 11⁄16" x 31⁄8" (27 x 79 mm)Lengths: 46" (1168 mm) to 142" (3607 mm)Notes: • For doors up to 150 lbs. (68 kg)
• Jump proof double twin channel design
Sliding DoorComponents
28 800-325-9995www.hagerco.com
Four Wheel Ball Bearing HangerFor use on by-pass and pocket applications
9605 Material: Steel with Brass-tone Dichromate Finish
Wheel: 7⁄8" (22 mm) DiameterNotes: • Wheels are self aligning to
allow consistent contact with track• Pre-lubricated Celcon wheels
mounted on steel ball bearing shafts• Can be used on pivot set• For doors up to 125 lbs. (57 kg)• Used in conjunction with
9607, 9608 or 9609 Top Door Plate and 9599, 9601 or 9602 Track
Four Wheel Ball Bearing HangerFor use on by-pass and pocket applications
9606 Material: Steel with Brass-tone Dichromate Finish
Wheel: 7⁄8" (22 mm) DiameterNotes: • Wheels are self aligning to
allow consistent contact with track• Pre-lubricated Celcon wheels
mounted on steel ball bearing shafts• For doors up to 150 lbs. (68 kg)• Used in conjunction with 9607,
9608 or 9609 Top Door Plate and 9599, 9601 or 9602 Track
Top Door PlateUsed to attach door to hanger
9609 Material: Zinc Plated SteelGauge: 1⁄8" (3.2 mm)Size: 13⁄8" x 213⁄16"Notes: • Used to attach door to hanger
• Used in conjunction with9572, 9605, 9606, 9704 and9816 Hanger
Pivot SetFor use on bi-fold applications
9618 Material: Zinc Plated SteelNotes: • Thumb wheel vertical adjustment
• Top and bottom pivots require 3⁄8" (9.5 mm) diameter holes
• For doors up to 50 lbs. (23 kg)• For use with 9601 or 9599 track
Large Side Mount PlateOffset 11/16" (17 mm)
9608 Material: Zinc Plated SteelGauge: 1⁄8" (3.2 mm)Notes: • Used to attach door to hanger
• Used in conjunction with9572, 9605, 9606, 9704 and9816 Hanger
Heavy Duty Aluminum Double Box Track with 25/8" (67 mm) FasciaFor use on by-pass applications
9603 Material: Extruded AluminumGauge: 0.050" (1.3 mm)Track: 11⁄16" x 4" (27 x 102 mm) Lengths: 47" (1194 mm) to 144" (3658 mm)Notes: • Grooved fascia for painting
• For doors up to 150 lbs. (68 kg)• Jump proof double twin channel design• One piece track with built-in
grooved fascia
Small Side Mount PlateOffset 3/8" (10 mm)
9607 Material: Zinc Plated SteelGauge: 1⁄8" (3.2 mm)Notes: • Used to attach door to hanger
• Used in conjunction with9572, 9605, 9606, 9704 and9816 Hanger
Pocket Door Adapter KitFor use on pocket door kits 9629, 9630 & 9631 applications only
9634 Material: Galvanized Steel and Wood ShimsStandardClearance: 1⁄ 8" (3.2 mm) on each side of a
13⁄ 4" (44 mm) doorNotes: • Used with 13⁄ 4" (44 mm) doors by
allowing additional clearance between door and jamb
• Includes wider floor plates andshims for spacing split studs for an additional 3⁄ 16" (4.8 mm) on each side of a 13⁄4" (44 mm) door
Double Pocket Door Adapter KitFor use on double pocket door (bi-parting) applications
9639 Material: Zinc Plated Steel and Rubber Bumper Stops
Notes: • Joins two frames in the middle ofthe doorway
• For joining 9629, 9630, 9631 or9850 Pocket Door Kits
• Fits both KD and Built Up frames• Lag bolt for attaching to
rough header• Bumpers included to stop doors
in center of doorway
Sliding DoorComponents
29800-325-9995www.hagerco.com
Four Wheel HangerFor use on by-pass and pocket applications
9704 Material: Zinc Plated SteelWheels: Self aligning to allow consistent
contact with trackWheel: 7⁄ 8" (22 mm) DiameterNotes: • Pre-lubricated Celcon wheels
• For doors up to 125 lbs. (57 kg)• Used in conjunction with 9609
Top Door Plate and 9701,9702 Track
Heavy Duty Aluminum I-Beam TrackFor use on by-pass, bi-fold and pocket applications
9701 Material: Extruded AluminumGauge: 0.050" (1.3 mm)Track: 1" x 11⁄ 2" (25.4 x 38 mm)Lengths: 467⁄8" (1191 mm) to 144" (3657 mm)Notes: • Refer to series pages for weight
capacities• Jump proof V-shaped rails• Mounting holes are pre-punched
for ease of installation
Aluminum Double I-Beam TrackFor use on by-pass applications
9702 Material: Extruded AluminumGauge: 0.050" (1.3 mm)Track: 1" x 21⁄ 4" (25.4 x 57 mm)Lengths: 48" (1219 mm) to 144" (3657 mm)Notes: • For doors up to 125 lbs. (57 kg)
• Jump proof V-shaped rails
Aluminum FasciaFor use on by-pass applications
9709 Material: Extruded Aluminum Gauge: 0.062" (1.6 mm)Lip: 5⁄ 8" (16 mm)Fascia: 23⁄ 4" (70 mm) Lengths: 72" (1829 mm) and
96" (2438 mm)Notes: • Grooved fascia for painting
• Pre-punched holes for easyinstallation
Heavy Duty Aluminum Box TrackFor use on by-pass, bi-fold and pocket applications
9801 Material Extruded AluminumGauge: 0.075" (1.9 mm)Track: 15⁄ 8 "x 13⁄ 4" (41 x 44 mm)Lengths: 72" (1829 mm) to 192" (4877 mm)Notes: • For doors up to 250 lbs. (113 kg)
• Jump proof twin channel design
Heavy Duty Aluminum Double Box Track with 31/2" (89 mm) FasciaFor use on by-pass applications
9803 Material: Extruded AluminumGauge: 0.075" (1.9 mm)Track: 31⁄ 2" x 41⁄ 2" (89 x 114 mm)Lengths: 48" (1219 mm) to 144" (3658 mm)Notes: • For doors up to 250 lbs. (113 kg)
• Jump proof twin channel design• One piece track with built-in
smooth fascia
Aluminum FasciaFor use on by-pass applications
9809 Material: Extruded Aluminum Gauge: 0.072" (1.8 mm)Lip: 13⁄4" (44 mm)Fascia: 37⁄ 8" (98 mm)Lengths: 72" (1829 mm) and
96" (2438 mm) lengthsNotes: • Grooved fascia for painting
• Pre-punched holes for easy installation
Aluminum TrackFor use in by-pass applications
9810 Material: Extruded AluminumGauge 0.050" (1.3 mm)Track: 1" x 2" (25.4 x 51 mm)Lengths: 48" (1219 mm) to 144" (3658 mm)Notes: • For doors up to 75 lbs. (34 kg)
• One piece track
Bumper StopFor use in by-pass, bi-fold and pocket applications
9815 Material: Zinc Plated Steel and RubberNotes: • Fits all Hager track styles
except 9101• Screws onto track• Included in bi-fold sets 9570,
9870 and 9890
Sliding DoorComponents
30 800-325-9995www.hagerco.com
Aluminum Track with 13/4" (44 mm) FasciaFor use on by-pass applications
9820 Material: Extruded AluminumGauge: 0.050" (1.3 mm)Track: 13⁄4" x 3" (44 x 76 mm) Lengths: 48" (1219 mm) to 144" (3658 mm)Notes: • For doors up to 75 lbs. (34 kg)
• For use on 13⁄8" (35 mm) doors only• For use with 7⁄ 8" (22 mm) diameter
hanger wheels• One piece track with built-in smooth
fascia
Four Wheel Ball Bearing Quick Release HangerFor use on bi-fold applications
9827 Material: Zinc Plated SteelWheels: Self aligning to allow consistent
contact with trackWheel: 11⁄ 4" (32 mm) DiameterNotes: • Pre-lubricated Celcon wheels
• Ball bearing axles• For doors up to 125 lbs. (57 kg)• For use with 9801 Track• Quick release feature allows
easy door hanging and removal
Aluminum Box TrackFor use on by-pass, bi-fold and pocket applications
9821 Material: Extruded AluminumGauge: 0.06" (1.55 mm)Track: 15⁄ 8" x 11⁄ 16" (41 x 27 mm)Lengths: 59" (1499 mm) to 144" (3658 mm)Notes: • For doors up to 250 lbs. (113 kg)
• Jump proof twin channel design
Bi-fold Pivot SetFor use on heavy duty bi-fold applications
9828 Material: Zinc Plated SteelNotes: • Track pivot bearing mounts up
inside track - no track cutting required• Bottom pivot socket has ball
bearing raceway• Top and bottom pivots require
1⁄2" (12.7 mm) diameter and 13⁄ 4"(44 mm) deep holes
• For doors up to 125 lbs. (57 kg)• For use with 9801 and 9821 Track
Four Wheel Ball Bearing HangerFor use on by-pass and pocket applications for doors
9816 Material: Zinc Plated SteelWheels: Self aligning to allow consistent
contact with trackWheel: 11⁄ 4" (32 mm) DiameterNotes: • Pre-lubricated Celcon wheels
on steel shafts with steel ball bearings
• Ball bearing axles• For doors up to 75 lbs. (34 kg)• For use with 9801 Track
Four Wheel Ball Bearing Hanger and GuideFor use on bi-fold applications
9817 Material: Zinc Plated SteelWheels: Self aligning to allow consistent
contact with trackWheel: 11⁄ 4" (32 mm) DiameterNotes: • Pre-lubricated Celcon wheels
• Ball bearing axles• For doors up to 125 lbs. (57 kg)• For use with 9801 Track
Bi-Fold Pivot SetFor use on bi-fold applications
9818 Material: Zinc Plated SteelNotes: • Bottom pivot socket has ball
bearing raceway• Top and bottom pivots
require 3⁄ 8" (9.5 mm) diameter and 13⁄ 4" (44 mm) deep holes
• For doors up to 125 lbs. (57 kg)• For use with 9801 Track
Four Wheel Quick Release HangerFor use on by-pass and pocket applications
9824 Material: Zinc Plated SteelWheels: Self aligning to allow consistent
contact with trackWheel: 1" (25.4 mm) DiameterNotes: • Pre-lubricated Celcon wheels
• For doors up to 150 lbs. (68kg)• For use with 9821 Track• Quick release feature allows easy
door hanging and removal
Four Wheel Ball Bearing Quick Release HangerFor use on by-pass, bi-fold and pocket applications
9825 Material: Zinc Plated SteelWheels: Self aligning to allow consistent
contact with trackWheel: 1" (25.4 mm) DiameterNotes: • Pre-lubricated Celcon wheels
• For doors up to 125 lbs. (57 kg)for bi-fold applications
• For doors up to 250 lbs. (113 kg)for by-pass and pocket applications
• For use with 9821 Track• Quick release feature allows easy
door hanging and removal
Sliding DoorComponents
31800-325-9995www.hagerco.com
Two Piece Plastic Door GuideFor use on pocket door applications
9877 Material: ABS PlasticGuide: 3⁄ 4" x 13⁄ 4" (19 mm x 44 mm)Screw Holes: 9⁄ 32" (32 mm) CTCNote: Mounts on floor
Non-Adjustable Floor GuideFor use on by-pass applications
9902 Material: Steel with Brass-tone Dichromate Posts: Molded Celcon/NylonGauge: 0.042" (1.1 mm)Guide: 23⁄8" x 21⁄2" x 7⁄8" (60 x 64 x 22 mm)Note: For 3⁄ 4" (19 mm) doors
Non-Adjustable Floor GuideFor use on by-pass applications
9906 Material: Steel with Brass-tone Dichromate Posts: Molded Celcon/NylonGauge: 0.042" (1.1 mm)Guide: 35⁄8" x 21⁄2" x 7⁄ 8" (92 x 64 x 22 mm)Note: For 13⁄ 8" (35 mm) doors
Adjustable Heavy Duty Floor GuideFor use on by-pass applications
9909 Material: Steel with Bright ZincPosts: Molded Celcon/NylonGauge: 0.060" (1.5 mm)Guide: 47⁄8" x 15⁄8" x 13⁄16" (124 x 41 x 30 mm)Note: For 3⁄ 4" to 13⁄ 4" (19 to 44 mm) doors
Face/Side Mount BracketFor use with 9901, 9801 and 9821 box track
9900 Material: Zinc Plated Steel
Fasteners: #10 x 3⁄ 8" Phillips Pan Head tapping screws - track#10 x 11⁄2" Phillips Pan Headtapping screws - wall
Size: 13⁄ 4" x 11⁄ 4" x 17⁄ 16" (44 x 32 x 36 mm)Notes: • Reversible side mount bracket
• Mount at ends of track and every foot
Two Piece Pocket Door GuideFor use on pocket door applications only
9883 Material: PolyethyleneGuide: 13⁄16" x 3⁄4" x 11⁄8" (21 x 19 x 29 mm)Notes: • Two pieces per door required
• Screws to jamb to guide door and prevent rubbing
Non-Adjustable Floor GuideFor use on pocket door applications
9889 Material: PolyethyleneGuide: 23⁄8" x 21⁄2" x 7⁄8" (60 x 64 x 22 mm)Note: For 13⁄8" (35 mm) doors
Angle StopFor use on by-pass applications
9880 Material: Zinc Plated Steel and RubberGauge: 0.090" (2.3 mm)Stop: 11⁄4" x 11⁄4" x 7⁄8" (32 x 32 x 22 mm)Notes: • Keeps rear door pull exposed
• Mounts on door• Not included in sets
BumperFor use on pocket door applications
9881 Material: RubberStop: 1⁄2" diameter x 3⁄ 8" deep
(12.5 x 9.5 mm)Note: With screws
99019821TRACK
9801TRACK
Aluminum Track with 3" (76 mm) FasciaFor use on by-pass applications
9830 Material: Extruded AluminumGauge: 0.060" (1.5 mm)Track: 3" x 3" (76 x 76 mm)Lengths: 48" (1219 mm) to 144" (3658 mm)Notes: • For doors up to 75 lbs. (34 kg)
• For use on 13⁄ 8" (35 mm)doors only
• For use with 7⁄ 8" (22 mm)diameter hanger wheels
• One piece track with built-in smooth fascia
Galvanized Steel TrackFor use on by-pass applications
9840 Material: Galvanized SteelGauge: 0.030" (.8 mm)Track: 1" x 21⁄4" (25.4 x 57 mm)Lengths: 48" (1219 mm) to 144" (3658 mm)Notes: • For doors up to 75 lbs. (34 kg)
• For use with “B” hangers on 13⁄ 8"(35 mm) doors
• For use with 7⁄ 8" (22 mm)diameter hanger wheels
• Refer to series pages for weightcapacities