Post on 26-Oct-2020
GRUNDFOS DATA BOOKLET
DPK.10.50.075.5.0D Grundfos pump 96884078
Thank you for your interest in our products. Please contact us for more information, or visit our website
https://www.lenntech.com/grundfos/DPK000/96884078/DPK-10-50-075-5-0D.html
info@lenntech.comtel. +31 152 610 900 fax. +31 152 616 289
BE > THINK > INNOVATE
Printed from Grundfos Product Centre [2018.06.003]
Position Qty. Description1 DPK.10.50.075.5.0D
Product No.: On request
Submersible Drainage Pump
Grundfos DPK pump is a submersible pump for drainage applications.
The pump has semi-open impeller for 10mm free passage and is suitable for pumping·large quantities of underground and surface water·drainage water at high head
The compact design makes the pump suitable for both temporary and permanent installation.
The pump is cast iron, with side discharge port and integrated submersible 3-phase totally enclosedmotor in insulation class F (155°C).
The pump has a side discharge and a double mechanical seal.
The pump is ready for installation either free-standing or on an auto-coupling system.
The pump is equipped with temperature bi-metal sensor for motor protection in case of overheating.
The pump is fitted with 10 m cable.
Controls:Seal sensor: N
Liquid:Liquid temperature range: 0 .. 40 °CDensity: 998.2 kg/m³
Technical:Actual impeller diameter: 112 mmType of impeller: OMaximum particle size: 10 mmPrimary shaft seal: SIC-SICSecondary shaft seal: CERAMIC-CARBONMax. hydraulic efficiency: 46 %Curve tolerance: NONE
Materials:Pump housing: Cast iron
EN1561 EN-GJL-200Impeller: Ductile cast iron
EN1563 EN-GJS-450-10Motor: Cart iron
EN1561 EN-GJL-200
Installation:Maximum ambient temperature: 40 °CPump outlet: DN 50Maximum installation depth: 25 m
Electrical data:Rated power - P2: 0.75 kW
1/11
Printed from Grundfos Product Centre [2018.06.003]
Position Qty. DescriptionMains frequency: 50 HzRated voltage: 3 x 380-415 VVoltage tolerance: +5/-5 %Max starts per. hour: 30Rated current: 1.6 ARated current at 3/4 load: 1.4 ARated current at 1/2 load: 1.1 AMaximum current consumption: 2 ACos phi - power factor: 0.88Cos phi - p.f. at 3/4 load: 0.82Cos phi - p.f. at 1/2 load: 0.72Rated speed: 2850 rpmMotor efficiency at full load: 79.2 %Motor efficiency at 3/4 load: 77.5 %Motor efficiency at 1/2 load: 72.5 %Number of poles: 2Start. method: direct-on-lineEnclosure class (IEC 34-5): IP68Insulation class (IEC 85): FExplosion proof: noLength of cable: 10 mCable type: TP90/TP90
Others:Net weight: 31 kg
2/11
Printed from Grundfos Product Centre [2018.06.003]
On request DPK.10.50.075.5.0D 50 HzH
[m]
0
2
4
6
8
10
12
14
Q [l/s]0 0.5 1.0 1.5 2.0 2.5 3.0 3.5 4.0 4.5 5.0 5.5 6.0
eta[%]
0
20
40
60
80
100
DPK.10.50.075.5.0D, 3*400 V, 50Hz
P[W]
0
100
200
300
400
500
600
700
800
900
P1
P2
3/11
Printed from Grundfos Product Centre [2018.06.003]
H[m]
0
2
4
6
8
10
12
14
Q [l/s]0 0.5 1.0 1.5 2.0 2.5 3.0 3.5 4.0 4.5 5.0 5.5
eta[%]
0
20
40
60
80
100
DPK.10.50.075.5.0D, 3*400 V, 50Hz
P[W]
0
100
200
300
400
500
600
700
800P1
P2
398
226127
40
50
88
196
48
GU
01/
GU
02
GU
01/G
U02
1. T / P : THERMAL PROTECTOR2. S / S : SEAL SENSOR
*** NOTE ***
*** NOTE ***
START - STOP OVER LOAD RUN STOP FAULT
THR THR
AUX
AUX
YELLOW RED GREEN
MC
MC
MC
OL
ON
OFF
RL GL AUX
F / L
offManu
S / SAuto
F / L : LEVEL SWITCHCONTRLLER
F / LE1E2E3
RESET
GU 01 / GU 02
OP . TR
FUSEMCCB
MC
MCCB
V
A
CONTROLPANEL
CONTROLPANEL
INPUTPOWER
L1 L2
SUBMERSIBLEMOTOR PUMP
1.M3 ~
E
U1 V1 W1 T / P
T / P
T / P
S / S
S / S
T / P S / S S / S
1 239
1011
66
5 8
THR
L3
Description ValueGeneral information:Product name: DPK.10.50.075.5.0DProduct No: On requestEAN number: On requestTechnical:Max flow: 6.47 l/sHead min: 2.8 mHead max: 13.5 mActual impeller diameter: 112 mmType of impeller: OMaximum particle size: 10 mmPrimary shaft seal: SIC-SICSecondary shaft seal: CERAMIC-CARBONMax. hydraulic efficiency: 46 %Curve tolerance: NONEMaterials:Pump housing: Cast iron
EN1561 EN-GJL-200Impeller: Ductile cast iron
EN1563 EN-GJS-450-10Motor: Cart iron
EN1561 EN-GJL-200Installation:Maximum ambient temperature: 40 °CPump outlet: DN 50Maximum installation depth: 25 mLiquid:Liquid temperature range: 0 .. 40 °CDensity: 998.2 kg/m³Min. pH-value: 4Electrical data:Rated power - P2: 0.75 kWMains frequency: 50 HzRated voltage: 3 x 380-415 VVoltage tolerance: +5/-5 %Max starts per. hour: 30Rated current: 1.6 ARated current at 3/4 load: 1.4 ARated current at 1/2 load: 1.1 AMaximum current consumption: 2 ACos phi - power factor: 0.88Cos phi - p.f. at 3/4 load: 0.82Cos phi - p.f. at 1/2 load: 0.72Rated speed: 2850 rpmMotor efficiency at full load: 79.2 %Motor efficiency at 3/4 load: 77.5 %Motor efficiency at 1/2 load: 72.5 %Number of poles: 2Start. method: direct-on-lineEnclosure class (IEC 34-5): IP68Insulation class (IEC 85): FExplosion proof: noLength of cable: 10 mCable type: TP90/TP90Cable size: 4X1.5MM2+2X1MM2Controls:Seal sensor: NSensor type: NOthers:Net weight: 31 kg
398
226
12740
50
88
196
48
4/11
Printed from Grundfos Product Centre [2018.06.003]
On request DPK.10.50.075.5.0D 50 Hz
Note! All units are in [mm] unless others are stated.Disclaimer: This simplified dimensional drawing does not show all details.
398
226127
40
50
88
196
48
5/11
Printed from Grundfos Product Centre [2018.06.003]
On request DPK.10.50.075.5.0D 50 Hz
Note! All units are in [mm] unless others are stated.Disclaimer: This simplified dimensional drawing does not show all details.
223 42
5
223
70
354
50
232
223
70
425
202
384
223
50
6/11
Printed from Grundfos Product Centre [2018.06.003]
On request DPK.10.50.075.5.0D 50 Hz
Note! All units are in [mm] unless others are stated.Disclaimer: This simplified dimensional drawing does not show all details.
1 140
250
28
50
160355
558
284
396
569
50
4XM
16X2
00
50
226
196
120
120
70
7/11
Printed from Grundfos Product Centre [2018.06.003]
Exploded view
301a
219
92
7
7a
77
301a
92
11
9
51
100
49
105
45
215a
215
18
217215a
534a534
531531a
28
17
251d
251a
6
11b
66a
67
530530a
8/11
Printed from Grundfos Product Centre [2018.06.003]
Sectional drawing (TM058200 for TPE2,TPE3)
4
2 13
5
TM058200
9/11
Printed from Grundfos Product Centre [2018.06.003]
Exploded view ( TM057026 for MGE model H/I )
251d
251b
290
287277a
286
277
273a
273
268268a289a289
288b288288a
251a
252b
156c
159d
156b
156d188
275a
153
154
158
178
185
192
191
159e
156c 156
151152
266
187
291
293
252a
172
150
287a
502
273b
157
10/11
Printed from Grundfos Product Centre [2018.06.003]
Parts list DPK.10.50.075.5.0D, Product No. On requestValid from 1.5.2009 (0918)
Pos Description Annotation Données de classification Référence Quantité Unité- O-ring 1 pcs
37 O-ring 137a O-ring 1109 O-ring 1
- Cable 1 pcsHex head screw 1Hex head screw 1Nut 1Nut 1Clamp 1Clamp 1Rubber bush 1
168 Stuffing box 1168a Rubber 1181 Power cable 1181a Screw Designation: AISI 304 3
Length (mm): 16Thread: M6
181b Lock washer 3+ Kit, base stand vertikal 1 pcs- Motor assembly 1 pcs
Bolt 148 Stator 155 Motor housing 159 Bearing cover 159 Spring lock washer 360 Bearing housing 160b Hex head screw 3102 Stop ring 1151 Pump head cover 1153 Ball bearing 1154 Ball bearing 1154 Hex head bolt 4154a Insulation plate 1172 Shaft w/rotor 1178a Hex head screw 2181a Hex head bolt 4182a Hex socket head cap screw Length (mm): 20 3
Thread: M8183 Lock washer 6183a Spring lock washer 4186a Spring lock washer 3190 Lifting device 1193 Plug 2
- Hydraulic assembly 1 pcs9a Key 149 Impeller 150 Pump housing 166 Spring lock washer 184a Stand 1105 Mechanical seal cpl. 1188 Cap nut 1188a Hex head screw 6188b Lock washer 6189 Suction cover 1
11/11
Disclaimer: The information about the Grundfos pump in this document may be outdated. Data may be subject to alterations without further notice. Please contact us to verify the data above is still accurate/up-to-date.
All information is copyright Grundfos.
info@lenntech.comhttps://www.lenntech.comtel. +31 152 610 900 fax. +31 152 616 289