Post on 11-Jun-2020
GNSS and Elevation Certificates
North Carolina Geodetic Survey
Key elements of the new maps
Digital FIRM =
Flood Data Base + Topography +
DFIRM map maintenance
www.ncfloodmaps.com/pubdocs/issue_papers/ip70_ncfmp_base_data_review_procedures.pdf www.ncfloodmaps.com/pubdocs/issue_papers/ip24_final_nc_map_maintenance.pdf
Operational & proposed CORS
The status map shows the location of the different types of existing CORS sites and CORS sites that are being installed:
GNSS CORS site (i.e. can receive signals from both the U.S. and the Russian navigation satellites) in the North Carolina Real-Time Network (RTN) (i.e. can be accessed in real-time via a data cell phone and accessed for post-processing via the Internet) CORS site (i.e. can receive signals from only the U.S. navigation satellites) in the NC RTN CORS site not in the NC RTN (i.e. cannot be accessed in real-time, but can be accessed for post-processing via the Internet) GNSS CORS site that is being installed and will be incorporated into the NC RTN SC CORS TN CORS http://portal.ncdenr.org/web/lr/geodetic/maps/cors
The status map also shows the coverage area of the NC RTN (depicted by blue shading), which has achieved statewide coverage.
CORS administration • Connection to the NSRS
– Recommend local static surveys be performed to connect RTN CORS with local NSRS passive stations
– NCGS uses NGS-58 surveys to connect the CORS to the NSRS
CORS ▲Three (3) HARN monuments ▲ Two (2) local CORS reference
monuments
Asbury Cayton
Craven
CORS CORS reference monuments
Geoid model history
Geoid model history: GEOID09 in NC
Geoid model history: GEOID12 in NC
Elevation determination methods
• Leveling • Global Navigation Satellite System (GNSS)
– Static (http://www.ngs.noaa.gov/OPUS/) OPUS-S OPUS-RS
– Real Time Kinematic (RTK) – Real Time Network (RTN) (http://rtn2.ncdenr.org/)
GNSS elevation determination methods
• Planning – Existing control (horizontal and vertical)
Use 1st order or better control (horizontal) Don’t mix horizontal control (1st, 2nd , and 3rd) Use marks with Height Modernization or leveled
derived NAVD88 heights – Mark access – Use your planning software – Good satellite geometry – Collect enough data – Space weather
GNSS surveying
• Pick a good open site for control points
• Redundancy
• Good satellite geometry
• Avoid areas that have sources for multipath
• Redundancy
• Avoid antenna height blunders
• Keep equipment adjusted for the highest accuracy
• Check known points before, during and after survey session
• Backup power supply
• The more redundancy the better
• Redundancy
GNSS site selection
Hey NCGS! Is the RTN down?!! I can’t get a position fix!!!
Dear RTN user, The RTN is operational. The reason that you are not able to get a position fix is because you are under a dense canopy.
Guidelines for establishing GPS-derived heights
http://www.ngs.noaa.gov/PUBS_LIB/NGS-58.html http://www.ngs.noaa.gov/PUBS_LIB/NGS592008069FINAL2.pdf
Guidelines for Establishing GPS-Derived Orthometric Heights NOS NGS 59
Guidelines for Establishing GPS-Derived Ellipsoid Heights NOS NGS 58
Three basic rules of height determination
• RULE 1: Follow NGS’ Guidelines for Establishing GPS-Derived Orthometric Heights (Standards: 2cm & 5cm) (http://www.ngs.noaa.gov/PUBS_LIB/NGS592008069FINAL2.pdf)
• RULE 2: Use the latest national geoid model, i.e., Geoid12 (http://www.ngs.noaa.gov/GEOID/GEOID12/)
• RULE 3: Use the latest national vertical datum, i.e., NAVD 88
• Rule 4 (NC): Report positional accuracy and metadata (Board rule .1607) (http://reports.oah.state.nc.us/ncac/title%2021%20-
%20occupational%20licensing%20boards%20and%20commissions/chapter%2056%20-
%20engineers%20and%20surveyors/21%20ncac%2056%20.1607.html)
http://www.ngs.noaa.gov/PUBS_LIB/Benchmark_4_1_2011.pdf
NGS bench mark reset procedures
Highlights of the new Elevation Certificate
• Latest version of the Elevation Certificate (EC) effective March 16, 2009 – March 31, 2012.
• Available for download (in both PDF and
MS Word format) from FEMA’s website at: http://www.fema.gov/library/viewRecord.do?id=1383
• Elevations certified on or after April 1, 2010, must be submitted on the
new form. • The current form will remain effective until further notice.
Section C (If zone has BFE)
Section C2
A field survey is required for Items C2.a-h.
Enter the Benchmark Utilized. Provide the PID or other unique identifier assigned by the maintainer of the benchmark. For GNSS survey, indicate the benchmark used for the base station, the Continuously Operating Reference Stations (CORS) sites used for an On-line Positioning User Service (OPUS) solution (attach the OPUS report), or the name of the Real Time Network used.
Note the Vertical Datum. All elevations for the certificate, including the elevations for Items C2.a-h, must use the same datum on which the BFE is based.
Conversion/Comments. Show the conversion from the field survey datum used if it differs from the datum used for the BFE entered in Item B9 and indicate the conversion formula or software used. Show the datum conversion, if applicable, in this section or in the Comments area of Section D.
Questions?
Gary Thompson, PLS NC Geodetic Survey 512 North Salisbury Street Raleigh, NC 27604 919-707-9231 phone gary.thompson@ncdenr.gov
Scott Lokken NOAA/NGS 512 North Salisbury Street Raleigh, NC 27604 919-707-9237 phone scott.lokken@noaa.gov