Post on 29-Apr-2022
ATTACHMENTS FOR
OPERATING MACHINERY
G.F. Gordini srl Via E. Mattei, 4
48012 Bagnacavallo (RA) - Italy tel. +39 0545 62712 fax +39 0545 62140
www.gfgordini.cominfo@gfgordini.com
ATTACHMENTS FOR
OPERATING MACHINERY
ATTACHMENTS FOR OPERATING MACHINERY
RAVENNA
BAGNACAVALLO
G.F. Gordini designs and realizes a range of more than 20 attachments in 100 different versions, able to execute any kind of work, applicable to Skid-Steer Loader, Wheel Loader, Backhoe Loader and Mini Excavator.
Quality and reliability is the philosophy of our company that since 25 years operates in the fi eld.
INDUSTRIAL POLISHING BRUSH 2ANGLE POLISHING BRUSH 3POLISHING BRUSH WITH HARVEST BUCKET SP/SPS 4POLISHING BRUSH WITH HARVEST BUCKET SH/SHS 5POLISHING BRUSH WITH HARVEST BUCKET SPR 6ASPHALT PLANER 7PALLET FORK 8SIDESHIFT BACKHOE 9SILENCED HYDRAULIC HAMMER 10MIXER BUCKET 11GRADER 12TILTDOZER BLADE 13DOZER BLADE 14MULTIFUNCTION BUCKET 4 in 1 15HIGH TIP BUCKET 16SNOW BLOWER 17SNOW BLADE 18AUGER 19FRONTAL BUSH CUTTER 20MULCHING HEAD 21INDUSTRIAL PLIERS 22HEAVY DUTY PLIERS 23AGRICULTURAL PLIERS 24
INDEX
2
Model SI 1200 SI 1500 SI 1800 SI 2100 SI 2200 SI 2400
Working width mm 1200 1500 1800 2100 2200 2400
Total width mm 1345 1645 1945 2245 2400 2600
Oil fl ow min÷max lt/min 25÷50 25÷60 40÷80 40÷80 70÷120 70÷120
Oil pressure min÷max bar 120÷200 120÷200 160÷200 160÷200 200÷250 200÷250
Weight kg 350 400 460 490 740 800
Bucket capacity lt 230 290 350 410 530 580
Polishing brush suitable to clean and collect material along all internal and external surfaces with polypropylene brush.
Free swivel wheels 360°.
Waste bin with hydraulic cylinder for unloading.
Simple connection to a large machines variety (skid-steer loader, articulate loader, forklift, telescopic handler, etc.)
Total hydraulic operating, including waste bin opening.
Excellent sweeping quality; can adapt the brush to ground irregularities through its moving system of connection to machine.
Watering system with water tank, electrical pump 12 V and sprays to pulverizing water (option).
INDUSTRIALPOLISHING BRUSH
3
Polishing brush suitable to sweep material on right and left side with polypropylene brushes.
+/- 30° mechanical or hydraulic (option) drive angulation.
Moving system of roller brush.
ANGLEPOLISHING BRUSH
Model SA 155 SA 180 SA 210
Working width mm 1550 1800 2100
Total width mm 1690 1940 2240
Oil fl ow min÷max lt/min 30÷40 30÷50 50÷90
Oil pressure min÷max bar 160-200 160-200 180-240
Weight kg 275 310 450
4
Polishing brush with polypropylene brushes suitable to clean and collect material in building sites and to scrape mud with cutting edge.
Material harvest bucket.
Frontal and side protection of roller brush with rubber bands.
Model SPS with direct hydraulic motor on brushes shaft; excludes the usury of driving organs.
Falling and pressure watering kit with water tank 100 lt capacity (option) (not available for SP 110).
POLISHING BRUSHWITH HARVEST BUCKET SP/SPS
SP/SPS
Mode SP 110 125 140 155 168 180 210
Working width mm 1100 1250 1400 1550 1680 1800 2100
Total width mm 1210 1360 1510 1660 1790 1910 2210
Oil fl ow min÷max lt/min 20÷30 25÷35 30÷40 30÷40 30÷40 30÷50 50÷90
Oil pressure min÷max bar 140÷175 160÷200 160÷200 160÷200 160÷200 160÷200 180÷240
Weight kg 215 275 310 350 375 395 485
Bucket capacity lt 195 345 390 435 470 505 580
5
Polishing brush with polypropylene brushes suitable to clean and collect material in building sites and to scrape mud with cutting edge.
Material harvest bucket.
Frontal and side protection of roller brush with rubber bands.
4 steel wheels under the bucket to avoid bottom bucket wearing.
Model SHS with direct hydraulic motor on brushes shaft; excludes the usury of driving organs.
Falling and pressure watering kit with water tank 100 lt capacity (option).
POLISHING BRUSHWITH HARVEST BUCKET SH/SHS
SH/SHS
Model 125 140 155 168 180 210
Working width mm 1250 1400 1550 1680 1800 2100
Total width mm 1360 1510 1660 1790 1910 2210
Oil fl ow min÷max lt/min 25÷35 30÷40 30÷40 30÷40 30÷50 50÷90
Oil pressure min÷max bar 160÷200 160÷200 160÷200 160÷200 160÷200 180÷240
Weight kg 310 345 385 410 430 525
Bucket capacity lt 345 390 435 470 505 580
6
Polishing brush with polypropylene brushes suitable to clean and collect material in building sites and to scrape mud with cutting edge.
Material harvest bucket.
Frontal and side protection of roller brush with rubber bands.
Anti-wear reversible bolted blade.
Reinforced bottom bucket in HARDOX.
Falling and pressure watering kit with water tank 100 lt capacity (option).
POLISHING BRUSHWITH HARVEST BUCKET SPR
Model SPR 200 SPR 220 SPR 240
Working width mm 2000 2200 2400
Total width mm 2110 2340 2570
Oil fl ow min÷max lt/min 60÷90 70÷100 90÷130
Oil pressure min÷max bar 190÷250 190÷250 200÷300
Weight kg 600 730 850
7
Model CP 400 CP 500 CPX 500 CPX 600
Working width mm 400 500 500 600
Working depth mm 0÷150 0÷150 0÷150 0÷170
Oil fl ow min÷max lt/min 90÷120 100÷120 120÷160 120÷160
Oil pressure min÷max bar 170÷250 170÷250 170÷250 170÷250
Weight kg 710 740 800 800
Side-shift mm 650 650 650 650
Planer suitable to mill asphalt and concrete with high fl ow hydraulic systems for Skid-Steer Loader.
Mechanical or hydraulic depth adjustment with support sledges independent on 2 sides.
Strong steel wheels on frame to increase stability.
Hydraulic side translation for line wall work.
20° transverse mechanical inclination.
ASPHALTPLANER
8
Pallet Fork for Skid-Steer Loader.Frame complete of no-overloading protection grate.N. 2 manually side-shift forks.
Pallet Fork for Backhoe Loader and Wheel Loader.Fork with frame.N. 2 manually side-shift forks.
Lifting capacity indicated refers to load positioned in a balanced way on both forks with center of gravity 500 mm distant.
PALLETFORK
Pallet Fork forSkid-Steer Loader
Skid - Steer Loader
Model PF 100 PF 120 PF 130 PF 150 PF 250 PF 450
Lifting capacity kg 1000 1000 1800 2500 2500 4500
Weight kg 120 145 185 230 260 380
Fork section mm 80x30 80x30 100x35 100x40 100x40 120x50
Fork lenght mm 1000 1000 1100 1200 1200 1200
Frame width mm 1000 1200 1300 1500 1500 1500
Frame height mm 900 950 950 950 540 540
Pallet Fork for Backhoe Loaderand Wheel Loader
Backhoe Loader andWheel Loader
9
Backhoe with side shift frame at hydraulic clamp for line wall digging.
Independent hydraulic stabilizers.
Device to Skid-Steer Loader with inside cab controls.
Standard digging bucket.
Auxiliary hydraulic system for hammer (option).
SIDESHIFTBACKHOE
Model P250 P280 P320
Max digging depth mm 2450 2800 3250
Oil fl ow min÷max lt/min 20÷30 35÷45 40÷50
Oil pressure setting bar 160 165 165
Weight kg 510 600 820
Standard bucket width mm 300 300 300
10
Silenced hydraulic hammer with completely closed structure.
High back-pressure tolerated on the unloading circuit, with possibility of application on Skid-Steer Loader, Mini-Excavator, Backhoe Loader, without stop problems.
Smooth hole plate for coupling system fi xing to Skid-Steer Loader frame and saddle for excavator/backhoe.
SILENCED HYDRAULIC HAMMER
Model MH 50 S MH 90 S MH 160 S MH 250 S MH 350 S
Oil fl ow min÷max lt/min 15÷20 20÷40 30÷50 40÷60 55÷80
Oil pressure min÷max bar 130÷150 80÷120 80÷120 80÷120 80÷120
Back-pressure bar 25 30 25 25 20
Weight kg 60 100 180 250 370
11
Mixer bucket for concrete with blades and bottom in HARDOX.
Alone material loading and unloading by overturning or through the unloading plate located in centre bucket by hydraulic opening.
Front protection grate with opening hinge system for cleaning.
MIXER BUCKET
Model BC 220 BC 270 BC 320 BC 450 BC 650 BC 800
Bucket width mm 1200 1450 1650 1650 1750 2000
Total width mm 1340 1590 1790 1790 1890 2140
Oil fl ow min÷max lt/min 25÷40 30÷50 35÷60 60÷80 80÷120 120÷180
Oil pressure min÷max bar 170÷200 170÷200 180÷200 200÷250 200÷300 200÷300
Yield lt 220 275 320 450 650 800
Max capacity lt 275 330 400 550 800 960
Empty weight kg 300 350 380 465 710 800
12
Grader suitable to level off land, roads, squares, sport facilities.
It is equipped of blade with right/left inclination, hydraulic rotation and side-shift of blade.
360° free swivel front wheels.
For high precision works it is possible to install a LASER receiver system (option).
GRADER
Model LG 210 LG 270 LG 270 P
Blade width mm 2133 2700 2700
Oil fl ow min÷max lt/min 20÷80 20÷80 20÷80
Oil pressure min÷max bar 120÷200 140÷200 140÷200
Weight kg 550 900 900
Electro-valves inclination blade on-off on-off proportional
R/L hydraulic inclination blade 30° 30° 30°
R/L hydraulic rotation blade 35° 40° 40°
Hydraulic side-shift blade ±400 ±450 ±450
13
Blade suitable to level and to heavy earth-moving works, ideal for coupling on track Skid-Steer Loader.
It is equipped of blade with ± 25° hydraulic right and left inclination, ± 8° hydraulic oscillation.
Steel bolted blade wear.
TILTDOZERBLADE
Model LTD 205 LTD 220 LTD 250
Blade width mm 2050 2200 2460
Blade height mm 650 650 650
Weight kg 380 430 450
14
Blade suitable to re-burying works, ideal for coupling on wheel Skid-Steer Loader.
It is equipped of blade with ± 25° hydraulic right/left rotation.
Steel blade wear.
DOZERBLADE
Model LD 150 LD 180 LD 210
Blade width mm 1520 1820 2110
Blade height mm 530 530 530
Weight kg 170 200 230
15
Hydraulic opening bucket ideal to level, grab, dig, load and unload.
Front and back anti-wear steel blade.
Available with bolted or tip teeth (option).
MULTIFUNCTIONBUCKET 4 in 1
Model BM 125 BM 140 BM 155 BM 168 BM 185 BM 205
Bucket width mm 1250 1400 1550 1680 1850 2050
Weight kg 220 250 275 330 370 420
Max capacity m3 0,23 0,26 0,30 0,37 0,41 0,45
16
Bucket with raised unloading system by hydraulic drive; it increases the machine unloading height about 400 mm.
Anti-wear steel blade.
Available with bolted or tip teeth (option).
HIGH TIPBUCKET
Model BA 140 BA 155 BA 168 BA 185 BA 205
Bucket width mm 1400 1550 1680 1850 2050
Weight kg 220 240 275 320 375
Max capacity m3 0,25 0,28 0,32 0,36 0,40
17
Snow blower at double stage ideal for snow removal of sidewalks, parking, squares and narrows.
Replaceable bolted lower blade.
Discharge chute with 270° hydraulic rotation for jet directing.
Upper defl ector with hydraulic adjustment to set jet distance.
SNOWBLOWER
Model TN 155 TN 185 TNX 155 TNX 185 TNX 210
Working width mm 1550 1850 1550 1850 2100
Total width mm 1580 1880 1580 1880 2130
Oil fl ow min÷max lt/min 45÷60 50÷70 90÷120 110÷130 120÷140
Oil pressure min÷max bar 170÷190 170÷190 190÷220 190÷220 190÷220
Weight kg 350 390 395 435 530
Front height mm 740 740 740 740 860
Helix height mm 355 355 355 355 460
Fan diameter mm 560 560 560 560 610
18
Blade with anti-shock system by spring return.
± 30° right/left hydraulic rotation.
± 8° moving oscillation with spring return to central position for a precise grip also during slope change compared to machine.
Steel bolted blade wear (current).
Vulkollan blade wear suitable for delicate pavements.
SNOWBLADE
Model LN 160 LN 180 LN 210 LN 240 LN 240R LN 270
Blade width mm 1600 1828 2133 2400 2400 2700
Blade height mm 615 615 615 615 650 650
Weight kg 310 330 375 395 510 530
19
Auger head with hexagonal exit shaft for helicoidal drill connection and double oscillating joint.
Suitable to coupling on Skid-Steer Loader, Mini Excavator, Backhoe or Excavator.
Helicoidal drills are with double helix, anti-wear steel bolted edges for medium grounds work (for diameter Ø 150 the anti-wear edge is welded), or with WIDIA edges, for asphalt or crumbly rock work.
AUGER
Model TR 100 TR 180 TR 300 TR 600 TR 1200 TR 1500
Oil fl owmin÷max
lt/min 15÷35 25÷60 60÷100 80÷120 100÷140 130÷170
Oil pressuremin÷max
bar 180÷225 180÷225 200÷300 220÷300 220÷300 280÷350
Weight kg 55 85 120 170 205 260
Max helicoidaldrill
mm Ø 350 Ø 600 Ø 800 Ø 800 Ø 1000 Ø 1000
Max torque daNm 100 180 330 650 1200 1500
20
Model TC 145 TC 160 TC 180 TC 200
Working width mm 1450 1600 1800 2000
Oil fl ow min÷max lt/min 50÷70 70÷90 70÷90 80÷10
Oil pressure min÷max bar 180÷220 180÷220 180÷220 180÷220
Weight kg 610 650 720 800
Hammer type “P” n. 14 14 16 18
Frontal bush cutter suitable to cut grass or shrubs, till 5 - 6 cm diameter.
Right mechanical side-shift (400 mm) frame for side street work.
Back roller support adjustable to change cutting height.
Moving attack plate that allows the roller support to be always in contact with ground.
Side support sledges.
Forged hammer type “P”.
FRONTAL BUSH BUTTER
21
Mulching head suitable to cut grass, reeds, bushes, shrubs and pruning, for Excavator and Backhoe.
Roller support with adjustment possibility of cutting height.
Side support sledges.
MULCHINGHEAD
Model TCM 60 TCM 80 TCS 80 TCS 100 TCE 90 TCE 110 TCR 95 TCR 115 TCR 125
Workingwidth
mm 600 800 800 1000 900 1100 950 1150 1250
Oil fl ow min÷max
lt/min 30-35 30-35 30-35 30-35 45-50 45-50 60-65 60-65 60-65
Oil pressure min÷max
bar 150÷170 150÷170 150÷170 150÷170 180÷200 180÷200 180÷200 180÷200 180÷200
Weight kg 125 140 200 220 300 320 370 390 405
Blade type “Y” 20 28 - - - - - - -
Hammer type “C” - - 10 14 - - - - -
Hammer type “L” - - - - 8 10 - - -
Hammer type “P” - - - - - - 8 10 12
22
Pliers with containment material bucket with low profi le sides ideal for refuse, building and industrial debris collecting.
N. 2 hydraulic independent upper bitings.
INDUSTRIAL PLIERS
Model PI 140 PI 155 PI 168 PI 185 PI 205
Width mm 1400 1550 1680 1850 2050
Weight kg 275 300 320 350 495
Upper teeth n. 4 4 4 4 4
23
Pliers with removable lower spikes of big dimensions for hard works in building, industry and agriculture.
N. 2 hydraulic independent upper bitings.
HEAVY DUTYPLIERS
Model PH 140 PH 155 PH 168 PH 185 PH 205
Wirth mm 1400 1550 1680 1850 2050
Weight kg 370 400 440 490 580
Upper teeth n 4 4 4 4 4
Lower spikes n 9 10 11 12 14
Lenght lower spikes mm 800 800 800 800 850
24
Pliers with removable lower spikes for generic farm works (collecting of manure, straw, brushwood, etc..),
N. 1 hydraulic upper biting.
AGRICULTURALPLIERS
Model PA 125 PA 140 PA 155 PA 168 PA 185
Width mm 1250 1400 1550 1680 1850
Weight kg 195 220 240 260 285
Upper teeth n 4 4 4 4 4
Lower spikes n 8 9 10 10 11
Longth lower spikes mm 800 800 800 800 800