SZ500-06GAUGE SYPHON ALL STAINLESS STEEL

APPLICATIONS SYPHONS ARE USED MAINLY TO PROTECT PRESSURE INSTRUMENTS, GAUGES, SWITCHES AND TRANSMITTERS DIRECTLY COMING IN CONTACT WITH HIGH TEMPERATURE

Body Material Pipe Size Operating Pressure

AISI 316 Stainless Steel ½ “ , Schedule 40 100 bar at °C.

1.TypeSZ500-06

S03 Coil TypeS04 S05

BodyCS MS S4 S6L S6

*Marking/ Stamping will be on HEX of Adaptor if the ADAPTOR MOCis of SS

2. Pipe Size & Schedule

Please Specify Pipe Size & Schedule while Ordering. (For Example: To select 1/4" Schedule 40 pipe, write 1/4" -40)

3. Connection Type (*Not Suitable for NPT Type)

MU MV CZ

Swivel Female Adaptor for Male or Female ThreadingMale Thread on Pipe

Pipe Size Schedule1/4” 40, 80 & 160

3/8” 40, 80 & 1601/2” 40, 80 & 160

5. OptionsPVCWGHCX

With IBR Approval Marking By LaserMaterial Test Certificate Marking by Engraving

PROCESS FLUIDS OR VAPOURS. THESE ARE MOUNTED BETWEEN PROCESS AND PRESSURE INSTRUMENT. THEY REDUCE PROCESS PULSATION AND GENERATE COOLING EFFECT TO SAVE THE INSTRUMENT.

SPECIAL FEATURESPIGTAIL, COIL AND " " TYPE SHAPES MAXIMUM TEMPERATURE UP TO 400 °C NOMINAL PRESSURE UP TO 160 bar TIG WELDED & HYDRO TESTED MADE WITH SEAMLESS PIPES

Specification 1/4" BSP(MxF)1/4" BSP(MxM)1/4" BSP(FxF)

3/8" BSP(MxF)3/8" BSP(MxM)3/8" BSP(FxF)

1/2" BSP(MxF)1/2" BSP(MxM)1/2" BSP(FxF)

1/4" NPT(MxF)1/4" NPT(MxM)1/4" NPT(FxF)

3/8" NPT(MxF)3/8" NPT(MxM)3/8" NPT(FxF)

1/2" NPT(MxF)1/2" NPT(MxM)1/2" NPT(FxF)

4. Connection SizeABM.ABFABM.ABMABF.ABFABF.ABMBBM.BBFBBM.BBMBBF.BBFBBF.BBMCBM.CBFCBM.CBMCBF.CBFCBF.CBMANM.ANFANM.ANMANF.ANFANF.ANMBNM.BNFBNM.BNMBNF.BNFBNF.BNMCNM.CNFCNM.CNMCNF.CNFCNF.CNM

1/4" BSP(FxM)

3/8" BSP(FxM)

1/2" BSP(FxM)

1/4" NPT(FxM)

3/8" NPT(FxM)

1/2" NPT(FxM)

Pigtail Type"U" Type

Carbon Steel (Red oxide Painted)* Mild Steel (Chrome Plated)* AISI 304 SSAISI 316L SSAISI 316 SS (Standard)

S06 S07

Elbow TypeStraight Type (I-Tube)

How to Order: SZ500-06-S03-CR(1/4-40)-MU-ABM.ABF-PV

SZ500SYPHON ALL STAINLESS STEEL

For Other optional items, Please contact factory for delivery and minimum quantity of order.

Coil Type

Pigtail Type

"U" Type

A*=±5mm

A*=±5mm

A*=±5mm

Drawing & Dimension

Schmierer SEA Sdn Bhd (Co. No.: 1125610-M) No 72, Jalan Keluli AN7/AN,Pusat Perniagaan Bukit Raja, Seksyen 7, 40000 Shah Alam, Selangor, Malaysia Tel: +603 3344 8819 Fax: +603 3343 8819 sales@schmierersea.com & schmierersea09@yahoo.com www.SchmiererSEA.com

Authorized Distributor / Dealer / OEM / Reseller

Rev1/17

Schmierer GmbHNeuweg 2 D-64521 GroB-Gerau

Tel. 0049-(0) 6152-9801-5Fax. 0049-(0) 6152-9801-70

email: management@schmierer.de www.schmierer.de

Blank Page