Gate Keeper – inline Label check

Content

Systems for Can & End Inspection

High End Can Inspection Line

Leak Testing for DRD Cans

Conclusion

About ibea

Can Inspection

End Inspection

The Gate Keeper….

Décor Inspection

About Ibea

Integrator & Developer of Can maker Inspection

Equipment with over 25 year experience

Over 2.000 Systems sold Worldwide

About Ibea

ibea provides you with a 24 hours support

And is offering super fast spare parts service

Our local team in Asia guarantee quick response

times

Ibea Support Philosophy

China

Contact person: Mr. Zeng Jie

Phone: +86 1348 2167 117

E-Mail: zeng@ibea.de

Singapore & Southeast Asia

Contact person: Mr. Christof Frohs

Phone.: +65 81 82 04 75

E-Mail: frohs@ibea.de

Philippines

Contact person: Mr. Joel Valdezco

Phone: +63 92 09 10 47 36

E-Mail: joel.valdezco@jedec.com

Ibea in Asia

Over 2.000 systems installed

Ibea Systems in the World

Ardagh Can Pack

Royal Can

Ibea Customers

Systems for Can & End Inspection

The features

Full integrated vision system

Speed up to 3.000 parts per min

Black & white or color cameras

with up to 5 Megapixel

Remote control

Fully operational during inspection

Focus & height position can be stored in

the product job

UC-VIS & C-VIS - Inspection Systems

Each is available in 3 sizes

Small for diameters up to 99 mm

Big for diameters up to 153 mm

Special sizes starting

from 153 mm upon request

UC-VIS & C-VIS - Inspection Systems

UC-VIS & C-VIS - Inspection Systems

Can Inspection

Can - Panel Defect

Lower sidewall defect

End Inspection

How to inspect defects without dozens of

inspection areas ?

One view only to find the defects

Curl defect

Scratch defect

UV-lacquer defects

Double snap technology

With the use of one Camera can obtain 2 independent Images

Public side for classic defects and for Lacquer check

Decor Inspection

Décor Inspection (Ends, Cans & Closures)

The features

Special décor imager design

Up to 15 different décors in one job

Set up of new décors with just 5 steps

Easy localization of defects like:

stains

register problem

missing décore

wrong décore

blurs etc.

Décor Inspection (Ends, Cans & Closures)

Color monitor overview

Monitoring of up to 16 colors

simultaneously

Décor Inspection (Ends, Cans & Closures)

High-End 3P Can Inspection

INNER PANEL OUTER PANEL

INSIDE &

360° DÉCOR 360° SEAM

100% inline at 1500ppm

Modular structure

High-End 3P Can Inspection

INNER

PANEL

OUTER

PANEL

INSIDE &

360° DÉCOR

High-End 3P Can Inspection

Panel

inside

Panel

outside

Décor check 360

Seam inspection

Flange, Sidewall

High-End 3P Can Inspection

Seam inspection (double Seam, Spurs)

Seam Inspection (360° Outside)

Leak Testing

The features

Light Leak Tester for DRD Cans

Extreme sensitive up to 0,02 mm

in the bottom and 0,05 mm in

sidewalls

Easy set up like all ibea vision

inspection systems

Fast change over with easy

removable tooling

Light Leak Tester – LPT 7000

Inside of a Naroska drawn can press

Light Leak Tester – LPT 7000

Inside of a Soudronic can press

Light Leak Tester – LPT 7000

Inside of a Soudronic can press

Light Leak Tester – LPT 7000

LPT 7000 advantages

Defects are detected by the system

together with their real position on the

product

The LPT 7000 is integrated in the press

and therefore just a small footprint to your

line

• 150 ppm per lane on all lanes of the press

Also available as standalone version

Light Leak Tester – LPT 7000

The Gate Keeper

Label inspection

will keep your Palette free of faulty Labels

Gate Keeper

The features

Full integrated vision system

Different sizes available

(for 2p and 3p Cans)

Dedicated to find mixed Labels and

monitor color fidelity (up to 16 colors)

Speed up to 3.000 parts per min

2 Color cameras

with up to 5 Megapixel

Remote control

Fully operational during inspection

Gate Keeper

Typical defects to detect:

- mixed Labels

- upside / down Cans

- gross Label defects

- color variation

Gate Keeper

Sample for Aerosol Cans

Gate Keeper

Color Monitoring

Gate Keeper

Color Monitoring

Conclusion

Market Trendsetter

Know-how over 25 years of market presence

Modular Hard/ software design

Special customer solutions possible

Client orientated system handling – easy to use

Worldwide service

Remote support

Ibea Advantages

100%

product quality

Sheet inspection(Decor & lacquer)

Leak detection

Product side Can, End, Cap

inspection

Public side Can, End, Cap

inspection

Offline test equipment

YOU

360° Quality with Ibea

THANK YOU FOR YOUR ATTENTION !