Post on 06-Jul-2020
Disclaimer. The information contained in this catalogue is, to the best of our knowledge, accurate and reliable as of the date of publication. We do not, however, assume any liability whatsoever for the accuracy and completeness of the information. All images used are for illustrative purposes only and are subject to colour variation in certain instances. We reserve the right to modify specifications without prior consent where deemed necessary. E&OE.
All Colpac Limited original products displayed in this catalogue are protected by Intellectual Property Rights, including copyright and unregistered design rights and they may also be the subject of one or more registered designs or patents (or applications for such rights) where appropriate. All rights in the displayed products are reserved by Colpac Limited and no license is granted under those rights unless there is a written agreement to the contrary.
COUNTER TOP
ColSealTM Impulse Sealer 4
ColSealTM Sandwich Sealer 5
ColSealTM Auto Cup & Pot Sealer 6
CATERING & PRODUCTION ENTRY
ColSealTM SR230 Sealer 7
ColSealTM Maxi 8
PRODUCTION
ColSealTM PGINOX 10
- Pneumatic Bench Model Sealer
- Pneumatic Floor Standing Sealer
ColSealTM Savvie Sealer 12Semi-Automatic with optional compressor
ColSealTM SE1000 Conveyor 14Fully-Automatic Lidder & Sealer
PRODUCTION
ColSealTM Savvie Sealer (vacuum & gas) 12Semi-Automatic with optional compressor
ColMAPTM Slalom 7 20For vacuum, gas & M.A.P. products
QUICK GUIDEUse this guide to compare the specifications of our machinery. The range is categorised
into counter top, catering & production entry and production machinery making
it easier for you to find the perfect solution for your food
packaging needs.
Order code 08PGINLB 08PGFIPB (film roller)
08PGINLF 08PGFIPF (film roller)
08SAVGAS 08SE1000 08SAVGAS (vacuum & gas)
08COLSLA
Page No. 10 10 12 14 12 20
Machinery PGINOX Pneumatic Bench Model Sealer
PGINOX Pneumatic Floor Standing Sealer
Savvie Sealer SE1000 Sealer Savvie Sealer Slalom 7 Sealer
Type Sealing Sealing Sealing & M.A.P. Sealing Sealing & M.A.P. M.A.P.
Use Production Model Production Model Production Model Production Model Production Model Production Model
Production/Speed (units/h)
up to 500 up to 500 up to 500 up to 1200 up to 500 up to 1200
Sealing Area Capacity (mm)
320x420 (w) 320x420 (w) 260x400 (w) Made to order 260x400 (w) 380x265
Dimensions (mm) 600x600x450 600x600x1480 580x900x1325 2211x700x1119 580x900x1325 3800x1360x1400
Weight (kg) 27 80 175 150 175 700
PE
PP
BIO
PLA
Laminated
M.A.P.
Packaging C-vis® Trays, Heat-Seal, Film-Liddable and Laminated Packaging
C-vis® Trays, Heat-Seal, Film-Liddable and Laminated Packaging
C-vis® Trays, Heat-Seal, Film-Liddable, Laminated & M.A.P. Packaging
Heat-Seal and Laminated Packaging
C-vis® Trays, Heat-Seal, Film-Liddable, Laminated & M.A.P. Packaging
C-vis® Trays, Heat-Seal, Film-Liddable, Laminated & M.A.P. Packaging
Scan to watch Video
Order code 08KFC200 08COLSEA 08COLCUA 08COLCUB 08SR230 08MAXI 08MAXIFS (film roller)
Page No. 4 5 6 6 7 8
Machinery Impulse Sealer Sandwich Sealer Auto Cup & Pot Sealer 72-96mm
Auto Cup & Pot Sealer 97-120mm
SR230 Sealer Maxi Sealer
Type Sealing Sealing Sealing Sealing Sealing Sealing
Use Counter Top Counter Top Counter Top Counter Top Catering & Production Entry
Catering & Production Entry
Production/Speed (units/h)
Variable up to 300 up to 400 up to 400 up to 400 up to 400
Sealing Area Capacity (mm)
Up to 200 (w) 100x190 72-96 Ø 97-120 Ø 190x200x95 (h) 200x260
Dimensions (mm) 310x80x140 290x328x380 400x380x600 400x380x600 320x500x460 290x560x460
Weight (kg) 2 13 13 13 25 21
PE
PP
BIO
PLA
Laminated
M.A.P.
Packaging Clasp® and Sandwich bags
Heat-seal and Laminated Sandwich Packs
Hot Pots, Souper Cups, Multi-food Pots & PET/PP Cups
Hot Pots, Souper Cups, Multi-food Pots & PET/PP Cups
Hot Pots, Souper Cups, Multi-Food Pots, C-vis® Trays and Film-Liddable Packs
C-vis® Trays, Heat-Seal, Film-Liddable and Laminated Packaging
Scan to watch Video
Choosing the right packaging and sealing machinery may appear difficult but, as part of our service, we carry out machinery training in-house or at your or your customer’s site.We are committed to finding the right packaging solution for you and your customer, as the right machinery can help to increase productivity and efficiency on a production line as well as giving more flexibility.
Talk to our sales team about how we can help.CONTENTS
1
Tel: +44 (0)1525 712 261 • sales@colpacpackaging.com • www.colpacpackaging.com
From small, semi-automated counter top machines for sandwich shops and delicatessens, to larger, fully automatic systems for higher volume manufacturers, heat-sealing machinery can dramatically improve output and production efficiency.
Capable of handling a wide variety of food packs, our sealing machinery is also integrated with the very latest technology to ensure we are meeting food service demands.
This includes Modified Atmosphere Packaging (M.A.P.) which can extend shelf-life and help meet food waste objectives.
As everything we create is managed under one roof, we have the ability to listen to individual requirements and engineer customised packaging and sealing machinery solutions, while offering full demonstration and testing facilities, technical support and customer service.
015 015
OUR CERTIFICATIONS+44 (0)1525 712 261
sales@colpacpackaging.com
www.colpacpackaging.com
HOW TO CONTACT USDEDICATED IN-HOUSE CUSTOMER SUPPORT TEAM
ACCOUNT MANAGERS ALL AROUND THE UK / EUROPENETWORK OF AGENTS WORLDWIDE
The main office phone lines are open from Monday to Friday from 8am - 5pm.
Our office is closed during English public holidays.
To be the global leader in niche, added-value food packaging solutions, underpinned by our innovation, quality, responsiveness to customer needs and green credentials.
VISIONTo provide a comprehensive range of innovative food packaging solutions to customers around the world, working to exacting manufacturing standards in terms of quality, health and safety, hygiene, customer service and environment.
MISSION
Packaging available as FSC ® certified on request
32
OUR MULTILINGUAL
WEBSITE contains further information on all of our food packaging
solutions and sealing machinery
OVER
180 patents, trademarks
and registered designs
MANY OF OUR TEAM ARE MULTILINGUAL
offering expert advice on how packaging can be
adapted to meet the demands of individual overseas markets
Established 80 years ago, we design and manufacture creative, personalised food packaging products. Proud of our British heritage, we are based in Bedfordshire, a County in the East of England.
A private, independent company, operating from one, central manufacturing unit, we design, manufacture and sell a range of paperboard and combination packaging products, featuring strong green credentials, to food service operators and retailers globally.
4 5Tel: +44 (0)1525 712 261 • sales@colpacpackaging.com • www.colpacpackaging.comFor more information about our full range of machinery, see page 1.
Manual lever operation
Raised rubber seal tool plate
The ColSealTM Sandwich Sealer is a stainless
steel hand operated sealing machine, designed
specifically for back of store, delicatessen
and cafe sandwich shops.
The ColSealTM Sandwich Sealer is built to seal
‘lid attached’ paperboard sandwich skillets,
in formed and erected packs.
With interchangeable tooling, the Sandwich Sealer can seal:
The ColSealTM Impulse Sealer is a manual,
hand operated clamp sealer suitable for our
Clasp® products and other bag and lay-flat
tube packaging. Ideal for baguettes, paninis,
sandwiches, pies, toasties and lots more.
It is quick and efficient to set up and use
in back of store, catering, and production
environments or for demonstration usage.
Adjustable seal time
Clamp seal operation
Integral sliding cutter blade built into the machine to allow seal or seal and cut
ColSealTM Impulse Sealer ColSealTM Sandwich Sealer
• Simple machine with easy clamp sealing operation
• Supplied with integral sliding cutter blade built into the machine to allow seal or seal and cut
• Specifically designed to seal and cut bags and lay-flat tubes
• Light weight, can be bench or work surface mounted near to a single phase domestic 240 volt socket
• Teflon covered hot wire impulse sealer
• PP and Poly 1mm wide seal
• Supplied with spare blade and sealing wire
• Easy to clean
Features and benefits
Order code 08KFC200
Production speed variable
Sealing area capacity Length up to 200mm in width, optional 300mm available
Dimensions 310 x 80 x 140mm
Weight 2kg
Power 240 volt x 1 phase x 50Hz
Air Supply no air needed
Technical data
Film to board packsBaguette bagsPE FilmPP Film
The Impulse Sealer can seal:
Laminatedsandwich packs
Heat-seal sandwich packs
BIO windowPE window
• Seals ‘lid attached’ paperboard sandwich packs
• Simple and efficient sealer that allows operators to be in production within a few minutes
• Light weight, can be bench or work surface mounted near to a single phase domestic 240 volt socket
• Simple to load and unload
• Suitable for other size sandwich packs
• Tool plate is easily removed for wash down and change over
• Interchangeable tooling
Features and benefits
Order code 08COLSEA
Production speed variable, up to 300 units per hour, subject to load and reload
Sealing area capacity 100 x 190mm
Dimensions 250 x 380 x 328mm
Weight 13kg
Heat-seal plate Teflon coated, not interchangeable
Power 240 volt x 1phase x 13amp
Air Supply no air needed
Technical data
co
un
ter t
op
co
un
ter t
op
SCAN TO WATCH VIDEO SCAN TO
WATCH VIDEO
6 7Tel: +44 (0)1525 712 261 • sales@colpacpackaging.com • www.colpacpackaging.comFor more information about our full range of machinery, see page 1.
The ColSealTM Auto Cup & Pot Sealer is a stainless steel
semi-automatic cup and pot sealing machine system,
designed specifically for back of store, delicatessen
and cafe sandwich shops.
The ColSealTM Auto Cup and Pot Sealer is built to
‘film lid and seal’ onto paperboard cups and pots,
in two sizes 72-96mm or 97-120mm fixed diameter
profile film seal.
ColSealTM Auto Cup & Pot Sealer
Cup holding tool plate
470ml Multi- food pot
Souper Cups
Savori™ Hot Pots
Peelable film
With interchangeable tooling, the Auto Cup & Pot Sealer can seal:
PET/PP cups
• Seals ‘film lids’ onto paperboard cups and pots as well as plastic cups (PET/PP) for tamper proof seal
• Suitable for different size cups and pots (8/12/16/26 and 32 UK fl.oz)
• Simple to load and unload allows operators to be in production within a few minutes
• Light weight, can be work bench or counter top mounted
• Automatic film wind with adjustable feed
• Single cycle function and auto continuous cycle selection
• Simple base tool, easily removed for wash down and change over
• Interchangeable tool drawer collars
• Variable temperature control
• Continuous cycle count display (zeroed if needed)
Features and benefits
Order codes 08COLCUA (Ø 72-96mm cup/pot diameter)08COLCUB (Ø 97-120mm cup/pot diameter)
Production speed variable and automatic cycle, up to 400 units per hour, subject to load and reload
Sealing capacity Top plate, fixed diameter 100mm or 120mm
Dimensions 400 x 380 x 600mm
Weight 25kg
Heat-seal top plate with circular cutting tool
Teflon coated, sizes Ø 72-96mm (08COLCUA) or Ø 97-120mm (08COLCUB)
Power 240 volt x 1phase x 50Hz x 13amp
Air supply no air needed
Technical data
Lightweight and flexible, the ColSealTM SR230
Sealer is an efficient and easily transportable
‘plug and play’ film sealer.
Ideal for profile sealing of variable sized food
pots, including soups and noodle dishes, meal
trays and portion meal with specific thumb
tabs for easy peel off lids. The ColSealTM SR230
Sealer is constructed from food grade S304
stainless steel and nylon for simple and easy
hygienic wipe down.
ColSealTM SR230
• Option: profiles tailor-made, seal and cut mechanism
• Easy to use machine with adjustable seal temperature
• Light weight, mobile, can fit on any work bench or counter top near to a single phase domestic 240 volt socket
• Operator can be in production in a few minutes
• Easy to clean food grade S304 stainless steel and nylon
• Each machine specified for individual requirements with a fixed film sealing head
• Simple change over of film, uses a magnetic clamp film pull through for each film cycle
• Optional film sealer with adjustable height and under tray support
• Can be used to seal plastic trays
Features and benefits
Order code 08SR230
Production speed variable, up to 400 units per hour, subject to load and reload
Sealing area capacity 190 x 200 x 95(h)mm (film width 200mm max.)
Dimensions 320 x 500 x 460mm
Weight 25kg
Heat-seal plate Teflon coated, not interchangeable
Power 240 volt x 1phase x 800W
Air supply no air needed
Technical data
With interchangeable tooling, the SR230 Sealer can seal:
Multi-food pots
Souper CupsHot PotsPeelable film C-vis® Trays Film-liddable packs
co
un
ter t
op
ca
terin
g &
pro
du
ctio
n e
ntr
y
SCAN TO WATCH VIDEO
Ideal for sealing our Cups & Pots with a standard heat-seal film
SCAN TO WATCH VIDEO
Sugarcane Fibre Trays
Cups, Pots & Trays can be sealed with profile
thumb tabs for easy opening
7
8 9Tel: +44 (0)1525 712 261 • sales@colpacpackaging.com • www.colpacpackaging.comFor more information about our full range of machinery, see page 1.
Optional double sided tool allows for two different pack
sizes to be sealed.
Rotatable tool plate
Optional film roll holder
The ColSealTM Maxi is a hand operated
multi-functional sealer for heat-sealable
packaging such as sandwich, salad and
tortilla packs. This small and light weight
sealer offers versatility with two different
pack sizes within the same tooling drawer.
ColSealTM Maxi
The ColSealTM Maxi is all stainless steel and
ideal for use in coffee shops, retail outlets
and catering companies.
With interchangeable tooling, the Maxi Sealer can seal:
• Option: two different pack sizes within the same tooling drawer which is easily removed and rotated 180 degrees (see image)
• Easy to use machine with adjustable seal temperature
• Light weight, mobile, can fit on any work bench or counter top near to a single phase domestic 240 volt socket
• Operator can be in production in a few minutes
• Easy to clean food grade S304 stainless steel
• Optional film sealing
• Seals our heat-seal range and PP trays
• Can be used to seal plastic trays
Features and benefits
Order code 08MAXI 08MAXIFS (including film roll holder)
Production speed variable, up to 400 units per hour, subject to load and reload
Sealing capacity 200 x 260mm
Dimensions 550 x 270 x 420mm
Weight 21kg
Heat-seal plate Teflon coated, not interchangeable
Power 240 volt x 1phase
Air supply no air needed
Technical data
ca
terin
g &
pro
du
ctio
n e
ntr
y
ca
terin
g &
pro
du
ctio
n e
ntr
y
*dependent on pack type
SCAN TO WATCH VIDEO
Optional film roll holder
SCAN TO WATCH VIDEO
Heat-seal packaging rangeC-vis® TraysPE window Laminatedsandwich packs
Film-liddable packs
Sugarcane Fibre Trays
10 11Tel: +44 (0)1525 712 261 • sales@colpacpackaging.com • www.colpacpackaging.comFor more information about our full range of machinery, see page 1.
Floor standing base frame
Cycle illumination light
ColSealTM PGINOX
The ColSealTM PGINOX is a pneumatically
operated sealer for paperboard and film sealing
onto paperboard and PP trays and packs. This
production model can either be bench mounted
or supplied with a floor standing base frame.
It is suitable for sealing multiple packs within the
tool plate.
Removable panel access to optional compressor
• Easy to use machine with adjustable temperature control
• Mobile option or compressor mounted inside base
• Easy to clean stainless steel S304 and removable side panel
• Operator can be in production in a few minutes
• Base tooling drawer allows easy change over for other sizes
• Multi pocket base tool available (subject to product)
• Seals our paperboard heat-seal range and lidding film onto PP trays and open lid cartons
• Safety e-stop fitted
• Illuminated cycle sequence (indication light)
• Can be used to seal plastic trays
Features and benefits
Order code 08PGINLF 08PGFIPF (including film roll holder)
Production speed variable, up to 500 units per hour, subject to load and reload
Sealing area capacity 320 x 420mm wide
Dimensions 600 x 600 x 1480mm
Weight 80kg
Heat-seal plate Teflon coated, flat plate, not interchangeable
Power 240 volt x 1ph
Air supply 6 bar clean dry air - compressor supplied separately or customer supply compressed air
Technical data
Order code 08PGINLB 08PGFIPB (including film roll holder)
Production speed variable, up to 500 units per hour, subject to load and reload
Sealing area capacity 320 x 420mm wide
Dimensions 600 x 600 x 580mm
Weight 27kg
Heat-seal plate Teflon coated, flat plate, not interchangeable
Power 240 volt x 1ph
Air supply 6 bar clean dry air - compressor supplied separately or customer supply compressed air
Technical data
With interchangeable tooling, the PGINOX Sealer can seal:
Film sealing options
available for
3 C-vis®
3 Trays
pro
du
ctio
n
pro
du
ctio
n
Adjustable seal cycle time
SCAN TO WATCH VIDEO
SCAN TO WATCH VIDEO
SCAN TO WATCH VIDEO
Film-liddable packs
Heat-seal packaging rangeC-vis® TraysPE window Laminatedsandwich packs
Sugarcane Fibre Trays
12 13Tel: +44 (0)1525 712 261 • sales@colpacpackaging.com • www.colpacpackaging.comFor more information about our full range of machinery, see page 1.
The ColSealTM Savvie is available to seal
4 x packs per seal cycle.
This semi-automatic pneumatic operated sealing
machine is initiated by closing the tool plate drawer
containing our packs to initiate automatic seal
cycle by press button or auto start.
5 x programmable controls to adjust varied
heat-seal cycles.
We offer this machine for paperboard heat-seal
closure from sandwiches to trays and from
‘lid attached’ to film seal and from paper pulp
trays to pre-formed trays. This simple machine
is able to be in production in a few minutes.
Made from food grade S304 stainless steel,
it is mobile and fits into any production area
near to a 3 phase plug fitting.
Interchangeable tool plate
Sliding tool draw
Programmable control
Optional film roll holder
ColSealTM Savvie
Also available with M.A.P. facility.
• Semi-automatic sealer with vacuum pump or compressor
• Seals up to 4 packs per seal cycle. Optional extra tool sets available
• Suitable for heat-seal closure from sandwiches to trays and from ‘lid attached’ to film seal onto pulp trays or pre-formed PP/PET trays
• Operates by closing the tool plate drawer containing the packs to initiate automatic seal cycle / manual cycle
• Operation control adjustable from the panel for varied heat and seal cycles (5x programme to select)
• Easy to use machine which can be in production within minutes
• Easy to clean food grade S304 stainless steel
• Base tool drawer allows easy change over for other sized packs
• Multi pocket base tool available
• Seals packs with PE and PLA (bio) windows as well as film-lidding trays
• Integral vacuum pump for M.A.P.
• Optional silent running compressor at extra cost available for ambient
• Can be used to seal plastic trays
Features and benefits
Order code 08SAVGAS
Production speed variable, up to 500 units per hour, subject to load and reload
Sealing capacity 260 x 400mm wide
Dimensions 580 x 900 x 1325mm
Weight 175kg
Heat-seal plate Teflon coated
Power 380/415 volt x 3 phase
Air Supply Vacuum pump or integral compressor included; subject to customer confirmation
Technical data
With interchangeable tooling, the Savvie Sealer can seal:
Heat-seal packaging rangePLA windowPE window M.A.P. Trays C-vis® M.A.P. Trays
M.A.P. PacksFilm-liddable packs
Film sealing options
available for
3 C-vis®
3 Trays
pro
du
ctio
n
pro
du
ctio
n
SCAN TO WATCH VIDEO
Sugarcane Fibre Trays
14 15Tel: +44 (0)1525 712 261 • sales@colpacpackaging.com • www.colpacpackaging.comFor more information about our full range of machinery, see page 1.
The ColSealTM SE1000 sealing machine system
is designed specifically for larger producers of
paperboard heat-sealable food-to-go products.
This automatic linear conveyor enables
operators to quickly produce higher volumes.
It can be permanently placed or easily wheeled
near to a single phase domestic 240 volt socket
and clean air supply, up to 9 CFM. The SE1000 is
simple to load and unload so operators can be in
production within a few minutes. Optional change
over to other size products. Sealing tool plates are
adjustable for sandwich packs in ST23 or ST24 sizes.
The ColSealTM SE1000 sealing tool plates are easily
removed for wash down and change over for other
sized products.
Extra safety stop
Eject ski rails
Jacking feet
Safety infeed flap
Inboard panel
ColSealTM SE1000
With interchangeable tooling, the SE1000 Sealer can seal:
Heat-seal packaging rangePLA windowPE window
• Automatic conveyor lidder and sealer for high volume manufacturers
• Automatic sealing operation for ‘lid attached’ paperboard sandwich, wrap, tortilla, salad and baguette heat-sealed packaging
• Can be permanently placed or easily wheeled near a single phase domestic socket and needs clean air supply, at 6 bar pressure and 9CFM
• Efficient machine, simple to load and unload enabling operators to be in production within a few minutes
• Easy change over to other sized products with adjustable tooling
• Simple efficient base tools that can be easily removed and cleaned
• Manual loading of sandwich packs into tooling pockets
• Discharge exit of sealed packs onto conveyor or turntable (customer supply)
• Longer length conveyor options available
• Left to right operation (alternative also available)
• Seals Colpac ST23 and ST24 sandwich packs, SP1, ST61, TS5, BG1
• Seals PE windows or optional PLA (bio) windows with special recessed seal plate
Features and benefits
Order code 08SE1000
Production speed up to 1200 units per hour, subject to load and reload
Sealing capacity Made to order (per product)
Sealing area capacity 300 x 250mm
Dimensions 2211 x 700 x 1119mm
Weight 150kg
Heat-seal plate Teflon coated
Power 240 volt x 1 phase x 50/60Hz x 16amp industrial plug
Air Supply Compressor supplied separately or customer supply compressed air
Technical data
pro
du
ctio
n
pro
du
ctio
n
SCAN TO WATCH VIDEO
1716Tel: +44 (0)1525 712 261 • sales@colpacpackaging.com • www.colpacpackaging.com
HEAT-SEAL MICROWAVEABLE & OVENABLE
HEAT-SEAL Cookpac® is a new and smart packaging solution for chilled and frozen ready made meals, ideal for niche and quality retail markets, the catering industry, canteens in schools, colleges and hospitals, as well as for home delivery.
Material Ovenable board + PET
Coating Heat-resistant, matt
Colours Ovenable ink up to 6 colour print
Heating Options Ovenable up to 210 0C, microwaveable
Food Certifications EN71, (EC) N. 1935/2004, (EU) N. 10/2011, 2007/19 EC, (EC) N. 2023/2006
Specification
Cookpac® Plastic tray
Oven/Microwave ü üRecyclability ««««« ««
Environmentally Friendly
««««« ««
Transit Test ««««« ««
Taste/Aspect ««««« «««««
Branding ««««« ««« (need sleeves)
Shelf-Life ««««« «««
This all-in-one pack offers extensive branding solutions and uses up to 80% less plastic than traditional plastic trays for improved sustainability and environmental impact.
Comparison
Lid sealing machinery is required for Heat-sealable Cookpac.
COOKPAC® HEAT-SEAL PACKS ARE MADE TO ORDER.
(subject to minimum order quantities)
• Unique, recyclable one-piece pack – tray, lid and sleeve all-in-one
• Single stock keeping unit (SKU), one product code
• Rigid, non-stick board – strong construction design
• Individual printing opportunities
• Custom made pack sizes and window apertures available meeting your special requirements
Straight from fridge or freezer to microwave or conventional ovens
MICROWAVEABLE AND OVENABLE ONE-PIECE PAPERBOARD PACK
This premium pack is an environmentally friendly solution for chilled and frozen prepared meals, ideal for the catering and foodservice industry, the niche retail markets as well as for home delivery.
OVENABLE (UP TO 210°C/410°F – 40 MINS)
Cookpac® Heat-seal can be sealed with the following machines:
Colseal™ Maxi Colseal™ PGINOX Colseal™ SE1000 ColMAP™ Slalom 7
Modified Atmosphere Packaging (M.A.P.) technology extends the shelf-life of food products, maintaining their fresh look and taste.
M.A.P. has long been associated with plastic packaging. However, after years of research
and development, we have harnessed the technology to enable the production of recyclable
paperboard based hermetically sealable packs, suitable for vacuum and gas flushing
on our exclusive range of M.A.P. machinery (ColMAP™).
Important:We recommend that our customers carry out tests using our machinery and packaging, with their own specific food ingredients, to ascertain optimum shelf-life.
Also available with M.A.P. facility.See page 12.
ColMAPTM packaging features:
• Recyclable, laminated paperboard
• Multi-layered Folding Box Board (FBB)
• High barrier multi-layer film
• Suitable for food grade gases e.g. Carbon dioxide (CO2) and Nitrogen (N2)
• Extended shelf-life with no gas also achievable
• Strong branding options
ColMAPTM packaging benefits:
• Reduction in packaging and food waste
• Reduced transport costs (less frequent deliveries)
• Improved production efficiency
• Extended freshness of the product (depending on food products and influence of environment)
• Increased consistency (colour, freshness, taste…)
• Reduction, if not elimination, of chemical preservatives
• Possibility of creating new products and dishes
SEALERS FOR VACUUM& GAS M.A.P PRODUCTS
18 19
20 21Tel: +44 (0)1525 712 261 • sales@colpacpackaging.com • www.colpacpackaging.comFor more information about our full range of machinery, see page 1.
ColMAPTM SLALOM 7
The ColMAPTM Slalom 7 is a linear automatic
sealing machine working with a tool plate index
system. It is manufactured and designed to
accommodate a range of paperboard Modified
Atmosphere Packaging (M.A.P.) products, including
sandwich and salad packs and meal trays.
Packs are placed by hand into tooling pocket plates.
The machine then indexes through vacuum and gas
chamber at the desired M.A.P. programme.
The bodywork of the machine is extruded anodized
aluminium and it is assembled on 6 x adjustable
levelling feet and 6 x castors for mobility.
Interlock safety panels, covers and control boxes
are in stainless steel S304. All panels are easily
removed for maintenance or clean down of machine.
Features and benefits
• Tooling plates index pneumatically within poly guides
• Index and tool plates are centralised before seal closure, this system optimises reliability
• Vacuum and gas and seal cycle commences with safety control
• Index through into the seal head area is under a roller to assist in the fold and crease of the flange edges before sealing
• No need for tools to extract tool plates as these drop into position onto sealing guides which control position and indexing
• Teflon coated heated seal plate
• Removal and complete change over of tool sets is approximately 15 minutes
• Touch screen and push button controls, from a control panel surface mounted at infeed
• Selection of up to 10 programmes are available to vary amounts of vacuum and gas fill to achieve desired lowest residual oxygen content
• Electronic systems are positioned in stainless steel panel for easy inspection and maintenance
• External 106 m3 vacuum pump
• Vacuum can be controlled by time or by sensor
• Gas inlet for premixed gas (customer supply)
• Regulator of pressure and sensor of gas supply is fitted and an audible alarm for lack of gas or low gas sounds
• Ejection / exit at 900 to infeed and gravity drop onto customers accumulation table or conveyor
• Optional extras: coders, load stations, interlocks and right and left hand exit
• Can be used to seal plastic trays
Order code 08COLSLA
Production speed variable, up to 1200 units per hour, subject to load/reload and pack type
Sealing capacity up to 10 cycles per minute
Sealing area capacity 380 x 265mm
Dimensions 3800 x 1360 x 1400mm (machine footprint)
Weight 700kg approx.
Power 32 Amp x 3 phase x 50/60Hz + N + E (5 pin 16 Amp industrial)
Air supply Customer supply compressed air vacuum pump included (outside of machine)
Technical data
With interchangeable tooling, the Slalom 7 can seal:
M.A.P. laminated film
pro
du
ctio
n
pro
du
ctio
n
Control panel
External Vacuum Pump with independent power supply
3800
1170
1340
Side view
3800
1170
1340
Top view
SCAN TO WATCH VIDEO
M.A.P. Trays C-vis® M.A.P. Trays
M.A.P. PacksFilm-liddable packs
Sugarcane Fibre Trays
Pack exit
Direction of pack sealing
Colpac Ltd.Enterprise Way, Maulden Road, Flitwick, Bedfordshire, MK45 5BW, England, UK.
Tel: +44 (0) 1525 712 261Fax: +44 (0) 1525 718 205Email: sales@colpacpackaging.com
www.colpacpackaging.com
Registered in England 00326182
Registered office address as above.
BRITISHDESIGNER &MANUFACTURERDELIVERING INNOVATIVEFOODPACKAGING
SOLUTIONSWORLDWIDE