Post on 01-May-2018
2
Slide it. Love it.
Everyone does it: Slide it. Love it.People like to keep it simple. On their tablet PCs. On their smartphones. The revolutionary aesthetic appeal of vir-tual sliding fascinates millions: gentle, flowing movement, simply at the touch of a finger. But sliding in the real world's right on trend too. Truly practical cars have a sliding door; a sliding roof provides fresh air and a feeling of freedom, and at home we slide panel curtains and doors as room dividers or on furniture. Are you open to new trends? Because if you are, new doors are about to open for you too. In this case they open to the side. Whether for the bedroom, living room or kitchen furniture – Hettich gives you innovative sliding door systems that go perfectly with your furniture.
Are you open to a new love? Welcome to Hettich.
3
ErgonomicsBenefits that come with sliding doors
Sliding doors show what they're made of in everyday use. In terms of ergonomics and convenience, most consumers think sliding doors are better. And for good reasons: open sliding doors don't get in the way where space is at a premium.
Open doors on wall units are not likely to leave you injured. Sliding doors are also easy to open without stretching or dodging out the way.
DesignBeing creative with sliding doors
Sliding doors provide the key to picking up on modern, spacious in-terior design and continuing it in furniture. Large surface doors open the way to purist interior design.
Modern sliding door systems create a look that impresses with nar-row reveals that can also be kept to a minimum with large surface fronts. Easy precision adjustment provides superb finished results with perfect gap alignment.
FunctionalityWhat good cabinet doors need to do
When it comes to cabinet doors, it's the practical aspects most consumers attach importance to, particularly to ease of opening and closing. The benefit of linear movement provided with sliding doors should be combined with low forces needed to open them. Also appreciated is the convenience of Silent System for soft, gentle and silent closing.
The perfect sliding door system is also expected to come with out-standing running performance and give quality you can rely on.
4 www.hettich.com
WingLine 220
Page
Description
Number of door wings
Door wing weight
Side mounting
Door material
Door wing width mm
8 - 9
Side mounted folding door system with guide profile at top / bottom with invisibly installed fittings / guides
2
2400 mm max.
500 mm max.
Wood
Yes
25 kg max.
Door wing height mm
WingLine 230
16 - 17
Side mounted folding door system with guide profile at top for large-size doors
2
20 - 25 kg
Yes
Wood
600 mm max.
3000 mm max.
WingLine 77
24 - 25
Side mounted folding door system with guide profile at top / bottom for heavy doors
2
25 kg max.
Yes
Wood
500 mm max.
2400 mm max.
Folding door systemRange summary / technical comparison
5Technik für Möbel
WingLine 770
32 - 33
Side mounted folding door system with guide profile at top / bottom
2
20 kg max.
Yes
Wood
500 mm max.
2200 mm max.
WingLine 780
40 - 41
Side mounted folding door system with guide profile at top / bottom (optional) for small doors
2
10 kg max.
Yes
Wood
500 mm max.
2200 mm max.
WingLine 26
48 - 49
Side mounted folding door system with guide profile at top / bottom (optional)
2
depends on hinges
Yes
Wood
250 mm max.
1800 mm max. (2200 mm max. with lower guide)
WingLine 170
56 - 57
Side mounted folding door system with runner bar at top
2
depends on hinges
Yes
Wood / wood, wood / aluminium
300 mm max.
2200 mm max.
Folding door systemRange summary / technical comparison
6 www.hettich.com
Wing 77
Page
Description
Number of door wings
Door wing weight
Side mounting
Door material
Door wing width mm
64 - 65
Folding door system without side mounting, with guide profile at top / bottom, for folding doors that move freely in front of the carcase
2 or 4
2400 mm max.
500 mm max. for 2 door wings, 400 mm max. for 4 door wings
Wood
No
25 kg max. for 2 door wings, 20 kg max. for 4 door wings
Door wing height mm
Folding door systemRange summary / technical comparison
8 www.hettich.com
The runner profile is mounted on top panel. For high quality furni-ture design and optimum use of storage space.
Bottom guide profile under the bottom panel - for shallow plinth constructions. No visible fittings or profiles inside. More unobstructed space in the cabinet.
Mightily impressed. Your customers will love the sturdy WingLine 220: the top running folding door system connected to the carcase side even makes easy work of moving heavy and tall doors. Up to 25 kg door wing weight. The run-ner profile mounted on the top panel is elegantly concealed behind the doors. Optimum use can be made of storage space because it is not obstructed at any point.
Folding door systemWingLine 220 / attached to the sideAll the benefits at a glance
9Technik für Möbel
y
x
Performance summary 10 - 11 Technical details in brief Door sizes Operating principle
System components 12
Planning dimensions 13
Installation 14 - 15
Accessories 76 - 85
Folding door systemWingLine 220 / attached to the sideSummary
10 www.hettich.com
y
x
Technical details in brief Door size and door weight For 1 folding door with 2 wings Overlay door position For wooden doors Suitable for use with Sensys hinge with Silent System Door wing weight up to 25 kg Door height up to 2400 mm Door wing width 400 - 500 mm Height adjustment +/- 5 mm Tested with 40000 cycles 1000 - 2400
400 - 500
≤ 25 ≤ 25
Door material Number of door wings and door position
16 - 25 mm
Folding door systemWingLine 220 / attached to the sidePerformance summary
see pages 86 - 87
11Technik für Möbel
y
x
Operating principle / 1 folding door with 2 wings
13
3614
50
≤ 10≤ 6
5740,5
5 37
62
64
≤ 23
≥ 7,5C± 5
9
20
37
4
Pivot offset 6 mm
Runningcomponent
Guidecomponent
Centre hinge
Cent
re p
anel
Top panel reinforcement
Height adjustment ± 5Sensys8645i
Folding door systemWingLine 220 / attached to the sidePerformance summary
12 www.hettich.com
HettCAD
WingLine 220 set Set contains all the parts required for 1 folding sliding door with
2 panels
Set comprises: 1 tandem running component with height adjustment 1 guide component 4 clip on centre hinges
Advice: Please order profiles separately
Hinge side of cabinet Order no. PU
left 0 041 248 1 set
right 0 041 247 1 set
Folding door systemWingLine 220 / attached to the sideSystem components
Runner profile For screwing on Length 2000 mm Aluminium, silver anodized
Order no. PU
0 041 249 4 ea.
Guide profile For screwing on Length 2000 mm Aluminium, silver anodized
Order no. PU
0 041 251 4 ea.
13Technik für Möbel
Installation dimensions for WingLine 220
20 - 50
≤ 500
20 40
19
1 - 5
1 - 5
≥ 60
ca. R1 0
≤ 19 ≤ 25
≤ 19 ≤ 25
≈ R 10
≈ R 1≈ R 10
1 - 5
20
ø 35 x 11,5C
27
5,5
C
52
20
ø 35 x 11,5
27
ø 35 x 11,5C
27
64
ø 35 x 12,8
Sensys8645i
64
B2*B1*
ø 35 x 12,8 5,5
C
52
*B1 10,5 11 11,5 12 12,5
*B2 22,5 23 23,5 24 24,5
5 4 3 2 1
Sensys8645i
2-wing door set
2-wing folding doorDoor width 1000 mm max.Door weight / wing 25 kg max.Door wing height 2400 mm max.
2-wing folding door Drilling patterns
Door wing contours and reveals (as finger protection)
Radius as large as possible
Reveal depends on the seal that is used
Reveal depends on the seal that is used
Reveal depends on the seal that is used
Guide component
Running component
Overlay Reveal
Inside carcase width
Running component Pivot offset
6 mm
Clip on centrehinge
Guide
Clip on centrehinge
Drill hole spacing mm
Reveal mm
Calculation of door width / door wing widthDoor width = inside carcase width + (2 x overlay*)Door wing width = (inside carcase width – 1 x reveal + 2 x overlay*) ÷ 2* Overlay: max. 15 mm
Folding door systemWingLine 220 / attached to the sidePlanning dimensions
14 www.hettich.com
Installing runner and guide profile / preparing door set
1.
2.
3.
1. 2.
3.
Process for installing door set
Folding door systemWingLine 220 / attached to the sideInstallation
15Technik für Möbel
Installing running and guide components
Height adjustment on running component
± 5
Folding door systemWingLine 220 / attached to the sideInstallation
16 www.hettich.com
For mammoth tasks. WingLine 230 is the giant among folding door systems: areas of over 6 m2 are opened up in a single movement. Perfect for large cabinets, e.g. in the office or util-ity room. As an agile room divider. Or for a walk-in wardrobe in living areas that can be opened and closed with a turn of the hand. WingLine 230 has exactly what it takes, supporting doors with a leaf weight of 20 to 25 kg. Extremely sturdy: side mounting with Sensys 8645i fast assembly concealed hinge. WingLine 230 requires neither centre panels nor any bottom guide.
Folding door systemWingLine 230 / attached to the sideAll the benefits at a glance
17Technik für Möbel
y
x
Performance summary 18 - 19 Technical details in brief Door sizes Operating principle
System components 20
Planning dimensions 21 - 22
Installation 23
Accessories 76 - 85
Folding door systemWingLine 230 / attached to the sideSummary
18 www.hettich.com
y
x
Technical details in brief Door size and door weight For 1 folding door with 2 wings Overlay door position For wooden doors Suitable for use with Sensys hinge with Silent System Door wing weight 20 to 25 kg Door height up to 3000 mm Door wing width up to 600 mm Tested with 40000 cycles
≤ 3000
400 - 600
20 - 25 20 - 25
Door material Number of door wings and door position
16 - 25 mm
Folding door systemWingLine 230 / attached to the sidePerformance summary
see pages 86 - 87
19Technik für Möbel
y
x
Operating principle / 1 folding door with 2 wings
ø 5
11,3
68,7
0,8
1,520 19,5
120
80
ø 35
20
11,5
19
5
5
35,5
Runnercarriage
Damper forrunner profile
Screw slot
Folding door systemWingLine 230 / attached to the sidePerformance summary
20 www.hettich.com
HettCAD
WingLine 230 set Set contains all the parts required for 1 folding sliding door with
2 panels, right or left, or 2 folding doors with 2 panels each on right and left
Set comprises: 1 / 2 running components 5 / 10 folding door hinges for pressing in 1 / 2 dampers on the loose shelf 1 / 2 dampers on the runner profile Fixing material
Advice: Please order profiles separately
Hinge side of cabinet Order no. PU
left 0 010 083 1 set
right 0 010 084 1 set
left and right 0 079 015 1 set
Folding door systemWingLine 230 / attached to the sideSystem components
Runner profile For 19 mm top shelf For screwing on Length 2400 mm Aluminium, anodized black / powder coated white
Colour Order no. PU
white 0 079 013 4 ea.
black 0 079 014 4 ea.
21Technik für Möbel
Installation dimensions for WingLine 230
20 - 50
400 - 600
20 50
LK
LK
≤ 5
ø 35 x 11,5
20
13
120
80
44,5
ø 35 x 12
5
5,5
52
5
ø 1 0 x 1 1,5ø 35 x 12
5
5,5
52
5
ø 10 x 11,5
27
ø 35 x 12 ø 35 x 12
C
5,5
52
ø 35 x 12,8
C
5,5
52
ø 35 x 12,8
Sensys8645i
Sensys8645i
Sensys8645i
2-wing door set
2-wing folding doorDoor width 800 - 1200 mmDoor weight / wing 20 - 25 kgDoor wing height 2000 - 3000 mm
Drilling patterns
4-wing folding doorDamper on runnerprofile
Damper on looseshelf
Foldingdoor hinge
Foldingdoor hinge
Pivot offset6 mm
Pivot offset6 mm
Runnercarriage
Overlay (hinge)
1 folding door with 2 wings(right hinged)
Reveal Overlay (runner carriage)
Foldingdoor hinge
Foldingdoor hinge
Damper on loose shelf
Damper on runnerprofile
Runningcomponent
Calculation of door width / door wing width2 folding doors with 4 wingsDoor width = inside carcase width + (2 x overlay1)Door panel width = (inside carcase width – 3 x reveal + 2 x overlay1) ÷ 4Overlay1: max. 15 mm, C dimension 5 mm1 folding door with 2 wingsDoor width = inside carcase width + (overlay1 + overlay2)Door panel width = (inside carcase width – 1 x reveal + overlay1 + overlay2) ÷ 2Overlay1: max. 15 mm, C dimension 5 mmOverlay2: max. 4 mm
Sensys8645i
Overlay OverlayReveal RevealReveal 1 1
1 2
2 folding doors with 4 wings
Folding door systemWingLine 230 / attached to the sidePlanning dimensions
22 www.hettich.com
Installation dimensions for WingLine 230
19
1 - 5
1 - 5
≥ 60
ca. R1 0
≤ 19 ≤ 25
≤ 19 ≤ 25
≈ R 10
≈ R 1≈ R 10
1 - 5
5
5
52
5, 5
0
3
6
1.
2.
0 3
3 6
6 12
Door wing contours and reveals (as finger protection)
Radius as large as possible
Reveal depends on the seal that is used
Reveal depends on the seal that is used
Reveal depends on the seal that is used
Runnercarriage
1. Reveal adjustment: infinitely from minimum reveal to + 4 mm.2. Gradual adjustment of the pivot offset (0 / 3 / 6) allows door protrusion to be set to 3, 6 or 12 mm.
Folding door hinge
Pivot offset mm Door protrusion mm
1. Reveal adjustment2. Pivot offset
Folding door systemWingLine 230 / attached to the sidePlanning dimensions
23Technik für Möbel
Installing runner profile / preparing door set
~ 320
~ 320
19,5
Installing door set
1.
2.
3.
Folding door systemWingLine 230 / attached to the sideInstallation
24 www.hettich.com
Generating for power. Attached to the carcase side, the WingLine 77 folding door system even has no problem moving door wings weighing 25 kg. Running action is precision controlled and velvety smooth. Side mounting with the Sensys 8645i fast assembly concealed hinge saves valuable time.
Folding door systemWingLine 77 / attached to the sideAll the benefits at a glance
25Technik für Möbel
y
x
Performance summary 26 - 27 Technical details in brief Door sizes Operating principle
System components 28
Planning dimensions 29
Installation 30 - 31
Accessories 76 - 85
Folding door systemWingLine 77 / attached to the sideSummary
26 www.hettich.com
y
x
Technical details in brief Door size and door weight For 1 folding door with 2 wings Overlay door position For wooden doors Suitable for use with Sensys hinge with Silent System Door wing weight up to 25 kg Door height up to 2400 mm Door wing width up to 500 mm Height adjustment +/- 3 mm Centre panels recessed 40 mm Tested with 40000 cycles
1000 - 2400
400 - 500
≤ 25 ≤ 25
Door material Number of door wings and door position
16 - 25 mm
Top running sliding door systemWingLine 77 / attached to the sidePerformance summary
see pages 86 - 87
27Technik für Möbel
y
x
Operating principle / folding door with 2 wings
402 17,3
48 ± 3
64
C
≥ 55
2
≥ 2
17,3
(≥ 35)
26,5
26,2
26,2
26,5
≥ 15
Sensys8645i
Pivot offset 6 mm
Tandemrunningcomponent
Clip oncentrehinge
Guide component
Damper
Lever torear
Top running sliding door systemWingLine 77 / attached to the sidePerformance summary
28 www.hettich.com
HettCAD
WingLine 77 set Set contains all the parts required for 1 folding sliding door with
2 panels, right or left
Set comprises: 1 tandem running component 1 support with height adjustment 1 guide component 4 clip on centre hinges 2 noise absorbing felts
Advice: Please order profiles separately
Hinge side of cabinet Order no. PU
left 0 070 983 1 set
right 0 070 984 1 set
Runner profile For screwing on, screw on positions predrilled Length 2000 mm Aluminium, silver anodized
Order no. PU
9 193 573 4 ea.
Guide profile For screwing on, screw on positions predrilled Length 2000 mm Aluminium, silver anodized
Length mm Order no. PU
2000 0 072 919 4 ea.
Folding door systemWingLine 77 / attached to the sideSystem components
29Technik für Möbel
WingLine 77 installation dimensions for 1 folding door with 2 wings
20 - 50
≤ 500
20 40
19
1 - 5
1 - 5
≥ 60
ca. R1 0
≤ 19 ≤ 25
≤ 19 ≤ 25
≈ R 10
≈ R 1≈ R 10
1 - 5
LK
64
27
20
27
20
ø 35 x 11,5
64
B2*B1*
52
5,5ø 35 x 12,8
C
52
5,5ø 35 x 12,8
C
ø 35 x 11,5
*B1 10,5 11 11,5 12 12,5
*B2 22,5 23 23,5 24 24,5
5 4 3 2 1
3
Sensys8645i
Sensys8645i
2-wing folding door
2-wing folding doorDoor width 1000 mm max.Door weight / wing 25 kg max.Door wing height 2400 mm max.
2-wing door set Drilling patterns
Door wing contours and reveals (as finger protection)
Radius as large as possible
Reveal depends on the seal that is used
Reveal depends on the seal that is used
Reveal depends on the seal that is used
Runningcomponent
Guidecomponent
Clip oncentrehinge
Pivot offset6 mm
Overlay Reveal
Running component
Clip oncentrehinge
Guide component
Drill hole spacing mm
Reveal mm
Calculation of door width / door wing widthDoor width = inside carcase width + (2 x overlay*)Door wing width = (inside carcase width – 1 x reveal + 2 x overlay*) ÷ 2* Overlay: max. 15 mm, C dimension 6 mm
* 0 positionHeight adjustmentwith spindle
CarcaseThe top panel design shouldbe arranged so that the toppanel does not sag by morethan 1,5 mm under the loadof the folded doors
Folding door systemWingLine 77 / attached to the sidePlanning dimensions
30 www.hettich.com
Installing runner profile Installing guide profile
1. 2.
3.
�� 1. 2.
3.
Preparing door set
Folding door systemWingLine 77 / attached to the sideInstallation
31Technik für Möbel
Installing running and guide components / centre hinge
Folding door systemWingLine 77 / attached to the sideInstallation
32 www.hettich.com
Cushioned: the Sensys concealed hinge even closes heavy doors gently and silently.
Nifty: the doors are easy to fit and remove. Shelves are rearranged in a tick.
3 benefits in 1 system. Are you looking for a fold-ing door system with a high load capacity and attractive design – and do you want it to be quickly installed? If so, WingLine 770 is the perfect system for you. The door wings are quickly hooked in and aligned. The running components easily clip into the runner profile. Quality that's felt in every movement. Rated for door wing weights up to 20 kg – for plenty of design flexibility.
Folding door systemWingLine 770 / attached to the sideAll the benefits at a glance
33Technik für Möbel
y
x
Performance summary 34 - 35 Technical details in brief Door sizes Operating principle
System components 36
Planning dimensions 37
Installation 38 - 39
Accessories 76 - 85
Folding door systemWingLine 770 / attached to the sideSummary
34 www.hettich.com
y
x
Technical details in brief Door size and door weight For one folding door with 2 wings Overlay door position For wooden doors Suitable for use with Sensys hinge with Silent System Door wing weight up to 20 kg Door height up to 2200 mm Door wing width up to 500 mm With WingLine 26 as bottom guide Tested with 40000 cycles 1000 - 2200
400 - 500
≤ 20 ≤ 20
Door material Number of door wings and door position
16 - 25 mm
Folding door systemWingLine 770 / attached to the sidePerformance summary
see pages 86 - 87
35Technik für Möbel
y
x
Operating principle
30,5
22,7
64
2 40
26,2
17,3
26,5
ø 5
26,5
≥ 55
≥ 15
47,5
ø 4 x 16Damper
Reveal adjustment
Bottom panel
- 2 / + 2,5 mm
Folding door systemWingLine 770 / attached to the sidePerformance summary
36 www.hettich.com
HettCAD
WingLine 770 set Set contains all the parts required for 1 folding sliding door with
2 panels Running components and guide components with fast installation
Set comprises: 1 running component 1 guide component 4 folding door hinges, including drilling template
Advice: Please order profiles separately
Hinge side of cabinet Order no. PU
left 0 070 968 1 set
right 0 070 969 1 set
Folding door systemWingLine 770 / attached to the sideSystem components
Drilling template for folding door hinge For setting 2 mm and 5 mm reveals Plastic
Order no. PU
1 079 491 150 ea.
Runner profile For screwing on Length 2000 mm Aluminium, bright
Order no. PU
1 079 089 4 ea.
Guide profile For screwing on, screw on positions predrilled Length 2000 mm Aluminium, silver anodized
Order no. PU
0 072 919 4 ea.
37Technik für Möbel
Installation dimensions for WingLine 770
20 - 50
≤ 500
20 40
19
1 - 5
1 - 5
≥ 60
ca. R1 0
≤ 19 ≤ 25
≤ 19 ≤ 25
≈ R 10
≈ R 1≈ R 10
1 - 5
20
ø 35 x 11,5C
27
5,5
C
52
20
ø 35 x 11,5
27
ø 35 x 11,5C
27
64 ø 35 x 12,8 5,5
C
52
32
32
32
B *B *
ø 35 x 12,8
13,5 14 14,5 15 15,5
5 4 3 2 1
Sensys8645i
Sensys8645i
2-wing door set
2-wing folding doorDoor width 1000 mm max.Door weight / wing 20 kg max.Door wing height 2200 mm max.
Folding door with 2 wings Drilling patterns
Door wing contours and reveals (as finger protection)
Radius as large as possible
Reveal depends on the seal that is used
Reveal depends on the seal that is used
Reveal depends on the seal that is used
Guide component
Runningcomponent
Folding doorhinge
Pivot offset 5 mm
Overlay RevealGuide component
Running component
Folding doorhinge
Calculation of door width / door wing widthDoor width = inside carcase width + (2 x overlay*)Door wing width = (inside carcase width – 1 x reveal + 2 x overlay*) ÷ 2* Overlay: max. 15 mm, C dimension 5 mm
* Drill hole spacing
Reveal mm
Hinges / mounting plates should be ordered separately – see concealed hinges
LK
Folding door systemWingLine 770 / attached to the side / load capacity 20 kgPlanning dimensions
38 www.hettich.com
Installing runner profile / preparing door set
Installing door set
Folding door systemWingLine 770 / attached to the side / load capacity 20 kgInstallation
39Technik für Möbel
Process for installing door set
1.
2.
1.
2.
Installing running and guide components
Folding door systemWingLine 770 / attached to the side / load capacity 20 kgInstallation
40 www.hettich.com
Without a sound: fitted with the Sensys concealed hinge, these folding doors close gently and quietly.
Effortless: hook fitting into runner profile, engage lock … door move-ment is automatically stabilised.
Less production effort. The WingLine 780 folding door system manages with a simple carcase construction. Installation couldn't be easier. Most practical: To fit shelves, the door wing detaches from the running element and simply folds back. Can be used on hinged doors weighing up to 10 kg.
Folding door systemWingLine 780 / attached to the sideAll the benefits at a glance
41Technik für Möbel
y
x
Performance summary 42 - 43 Technical details in brief Door sizes Operating principle
System components 44
Planning dimensions 45
Installation 46 - 47
Accessories 76 - 85
Folding door systemWingLine 780 / attached to the sideSummary
42 www.hettich.com
y
x
Technical details in brief Door size and door weight For 1 folding door with 2 wings Overlay door position For wooden doors Suitable for use with Sensys hinge with Silent System Door wing weight up to 10 kg Door height up to 2200 mm Door wing width up to 500 mm With WingLine 26 as bottom guide Tested with 40000 cycles ≤ 2200
(≤ 900)
400 - 500
≤ 10 ≤ 10
Door material Number of door wings and door position
16 - 25 mm
Folding door systemWingLine 780 / attached to the sidePerformance summary
see pages 86 - 87
43Technik für Möbel
y
x
Operating principle
30,5
22,7
47,5
2 40
26,2
17,3
26,5
ø 5
26,5
ø 4 x 16
≥ 55
≥ 15
Damper
Reveal adjustment
Bottompanel
- 2 / + 2,5 mm
Folding door systemWingLine 780 / attached to the sidePerformance summary
44 www.hettich.com
HettCAD
Set 1 WingLine 780 with bottom guide component Set contains all the parts required for 1 folding sliding door with 2 panels Door height 2200 mm max. Running components and guide components with fast installation
Set comprises: 1 running component 1 guide component 4 folding door hinges, including drilling template
Advice: Please order profiles separately
Hinge side of cabinet Order no. PU
left 0 070 971 1 set
right 0 070 972 1 set
Set 2 WingLine 780 without bottom guide component Set contains all the parts required for 1 folding sliding door with 2 panels Door height 900 mm max. Running component with fast installation
Set comprises: 1 running component 2 folding door hinges, including drilling template
Advice: Please order profiles separately
Hinge side of cabinet Order no. PU
left 9 080 212 1 set
right 9 080 213 1 set
Folding door systemWingLine 780 / attached to the sideSystem components
Drilling template for folding door hinge For setting 2 mm and 5 mm reveals Plastic
Order no. PU
1 079 491 150 ea.
Runner profile For screwing on Length 2000 mm Aluminium, bright
Order no. PU
1 079 089 4 ea.
Guide profile For screwing on, screw on positions predrilled Length 2000 mm Aluminium, silver anodized
Order no. PU
0 072 919 4 ea.
45Technik für Möbel
Installation dimensions for WingLine 780
20
ø 35 x 11,5C
27
ø 35 x 12,85,5
C
52
20
ø 35 x 11,5
27
ø 35 x 12,8 5,5
C
52
32
32
32
B *B *
C
20 - 50
≤ 500
20 40
19
1 - 5
1 - 5
≥ 60
ca. R1 0
≤ 19 ≤ 25
≤ 19 ≤ 25
≈ R 10
≈ R 1≈ R 10
1 - 5
13,5 14 14,5 15 15,5
5 4 3 2 1
Sensys8645i
Sensys8645i
2-wing door set
2-wing folding doorDoor width 1000 mm max.Door weight / wing 20 kg max.Door wing height 2200 mm max.
Folding door with 2 wings Drilling patterns
Door wing contours and reveals (as finger protection)
Radius as large as possible
Reveal depends on the seal that is used
Reveal depends on the seal that is used
Reveal depends on the seal that is used
Guide component
Runningcomponent
Folding doorhinge
Pivot offset 5 mm
Overlay Reveal
Guide component
Running component
Folding doorhinge
Calculation of door width / door wing widthDoor width = inside carcase width + (2 x overlay*)Door wing width = (inside carcase width – 1 x reveal + 2 x overlay*) ÷ 2* Overlay: max. 15 mm, C dimension 5 mm
* B drill hole spacing mm
Reveal mm
Hinges / mounting plates should be ordered separately – see concealed hinges
LK
Folding door systemWingLine 780 / attached to the sidePlanning dimensions
46 www.hettich.com
Installing runner profile / preparing door
Installing door set
Folding door systemWingLine 780 / attached to the sideInstallation
47Technik für Möbel
Installing door set
1.2.
1.
2.
Installing runners
Folding door systemWingLine 780 / attached to the sideInstallation
48 www.hettich.com
Good basis: WingLine 26 is the preferred option for the bottom guide.
Destined for greater things: WingLine 26 is also suitable as a top runner system for small doors.
Economic miracle. Reliable system providing excellent value for money: the WingLine 26 folding door system manages with-out a bottom guide. Given its uncomplicated design, the WingLine 26 system is also often used for a bottom guide – where it comple-ments the top running WingLine 770 / 780.
Folding door systemWingLine 26 / attached to the sideAll the benefits at a glance
49Technik für Möbel
y
x
Performance summary 50 - 51 Technical details in brief Door sizes Operating principle
System components 52
Planning dimensions 53
Installation 54 - 55
Accessories 76 - 85
Folding door systemWingLine 26 / attached to the sideSummary
50 www.hettich.com
y
x
Technical details in brief Door size and door weight For 1 folding door with 2 wings Overlay door position For wooden doors or wood / aluminium framed doors Suitable for use with Sensys hinge with Silent System Door wing weight depends on hinges Door height up to 1800 mm (2200 mm with bottom guide) Door wing width up to 250 mm Ideal as bottom guide for WingLine 770 / WingLine 780 Tested with 40000 cycles
≤ 1800(2200)
≤ 250
Door material Number of door wings and door position
AL
16 - 19 mm
Folding door systemWingLine 26 / attached to the sidePerformance summary
see pages 86 - 87
51Technik für Möbel
y
x
Operating principle
≤ 5 ø 355,25
10
11,5
26,2
17,3
35
26,5
1
2 ≥
Pivot offset
Folding door systemWingLine 26 / attached to the sidePerformance summary
52 www.hettich.com
HettCAD
Guide component for fast installation For fast installation With 3 runner rollers and 1 concealed hinge Steel, nickel plated Silver / plastic, grey
Hinge side of cabinet Order no. PU
left 0 070 956 10 ea.
right 0 070 959 10 ea.
Centre hinge 625 Centre hinge for folding doors Can be installed at the centre or with pivot offset Top running performance due to abrasion-resistant distance rings
with pivot bearing With fixed steel pin Steel, nickel plated
Order no. PU
0 071 648 10 ea.
Centre hinge with adjustable offset pivot Centre hinge for folding doors For door thicknesses over 15 mm Same drilling pattern for door and side element, both elements are
mounted separately The reveal can be infinitely adjusted from minimum reveal to + 4 mm,
application is always flush Gradual adjustment of the pivot offset with 0 mm, 3 mm and 6 mm Zinc die-cast nickel plated
Mounting option Order no. PU
For screwing on 0 046 787 10 ea.
For pressing in 0 052 095 10 ea.
Folding door systemWingLine 26 / attached to the sideSystem components
Socket M5 x 11 mm for folding door hinge 625 For M5 thread Drilling diameter 10 mm Plastic, white
Order no. PU
0 078 920 200 ea.
11
ø 10
Guide profile For screwing on, screw on positions predrilled Length 2000 mm Aluminium, silver anodized
Length mm Order no. PU
2000 0 072 919 4 ea.
53Technik für Möbel
Installation dimensions for WingLine 26
20 - 50
≤ 250
20 40
19
1 - 5
1 - 5
≥ 60
ca. R1 0
≤ 19 ≤ 25
≤ 19 ≤ 25
≈ R 10
≈ R 1≈ R 10
20
ø 35 x 11,5 ø 35 x 12,8
ø 35 x 12,8
5,5
5,5
CC
C
27 52
52
1 - 5
Sensys8645i
Sensys8645i
2-wing door set
2-wing folding door Drilling patterns
Door wing contours and reveals (as finger protection)
Radius as large as possible
Reveal depends on the seal that is used
Reveal depends on the seal that is used
Reveal depends onthe seal that is used
Guide component
Centre hinge
Pivotoffset 5,25 mm
Overlay Reveal
Guide component
Calculation of door width / door wing widthDoor width = inside carcase width + (2 x overlay*)Door wing width = (inside carcase width – 1 x reveal + 2 x overlay*) ÷ 2* Overlay: max. 15 mm, C dimension 5 mm
Hinges / mounting plates should be ordered separately – see concealed hinges
2-wing folding doorDoor width 500 mm max.Door wing height from 800 to 1800 mm
LK
Folding door systemWingLine 26 / attached to the sidePlanning dimensions
54 www.hettich.com
Installing runner profile Preparing door set
Installing door set
Folding door systemWingLine 26 / attached to the sideInstallation
55Technik für Möbel
Installing door set
32
9
8,519
1,25
50
Installing guide components
2
Folding door systemWingLine 26 / attached to the sideInstallation
56 www.hettich.com
170° opening angle: showing where everything is and never in the way.
Floor clearance: a bottom runner can be omitted. Minimal door pro-trusion for unobstructed access.
Commanding view. WingLine 170 is the folding door system with a generous opening angle of up to 170°– with everything inside in full view and easily accessible. On opening, the guide bar positioned on the top panel lifts the outer door half from the carcase. No contact – no running noise!
Folding door systemWingLine 170 / attached to the sideAll the benefits at a glance
57Technik für Möbel
y
x
Performance summary 58 - 59 Technical details in brief Door sizes Operating principle
System components 60
Planning dimensions 61
Installation 62 - 63
Accessories 76 - 85
Folding door systemWingLine 170 / attached to the sideSummary
58 www.hettich.com
y
x
Technical details in brief Door size and door weight For 1 folding door with 2 wings Guide bar mounted on top panel Overlay door position For wooden doors or wood / aluminium framed doors Suitable for use with Sensys hinge with Silent System Door wing weight depends on hinges Door height up to 2200 mm Door wing width up to 300 mm Opening angle up to 170° Runner bar only approx. 10 mm thick Tested with 40000 cycles
800 - 2200
250 - 300
Door material Number of door wings and door position
AL
16 - 25 mm
Folding door systemWingLine 170 / attached to the sidePerformance summary
see pages 86 - 87
59Technik für Möbel
y
x
Operating principle
12
8
ø 10 x 12
8,5
2
430
110° / 125°
≥ 12
≥
Opening angle
Top mountedroller fitting
Guide bar
Carcase inside edge
Drilling forsocket 33
Folding door systemWingLine 170 / attached to the sidePerformance summary
60 www.hettich.com
HettCAD
WingLine 170 set Set contains all the parts required for 1 folding sliding door with
2 panels
Set comprises: 1 runner bar with base and adjustment element 1 side mounted roller fitting Fixing material
Order no. PU
0 074 658 1 set
Centre hinge 625 Centre hinge for folding doors Can be installed at the centre or with pivot offset Top running performance due to abrasion-resistant distance rings
with pivot bearing With fixed steel pin Steel, nickel plated
Order no. PU
0 071 648 10 ea.
Centre hinge with adjustable offset pivot Centre hinge for folding doors For door thicknesses over 15 mm Same drilling pattern for door and side element, both elements are
mounted separately The reveal can be infinitely adjusted from minimum reveal to + 4 mm,
application is always flush Gradual adjustment of the pivot offset with 0 mm, 3 mm and 6 mm Zinc die-cast nickel plated
Mounting option Order no. PU
For screwing on 0 046 787 10 ea.
For pressing in 0 052 095 10 ea.
Folding door systemWingLine 170 / attached to the sideSystem components
61Technik für Möbel
WingLine 170 installation dimensions
12
8
ø 10 x 12
8,5
2
430
110° / 125°
≥
≥
≥ 12
≥ 12
≥ 8
ø 10 x 12
8,5
2
≥ 12
± 5
200 250 300
110° / 125° 400 370 340
170° 370 350 320
Selekta Pro 2000 / 180° 370 340 310
Opening angle
Top mountedroller fitting
Guide bar
Carcase inside edge
Drilling forsocket 33
Opening angle 170°
Guide bar
Carcase inside edge
Drilling forsocket 33
Adjustmentfacility
Use Sensys, Intermat, SlideOn or Selekta Pro 2000 hinge formounting the door on the carcase.With opening angles of 110° / 125°, 170° and 180°,Wing Line 170 permits unrestricted access to the cabinet interior– see table.Hinges / mounting plates must be ordered separately.– see concealed hinges.
Maximum door height: 2200 mm – requiring a minimumof 5 hinges.
Wing width min. max.mm
Hinge approx. min. carcase depth in mm
Folding door systemWingLine 170 / attached to the sidePlanning dimensions
62 www.hettich.com
Preparing door set
Installing door set
Folding door systemWingLine 170 / attached to the sideInstallation
63Technik für Möbel
Installing runner bar
Folding door systemWingLine 170 / attached to the sideInstallation
64 www.hettich.com
Leave a good impression: design flexibility with up to 4 door wings. No attachment to carcase side.
Tried and proven: sturdy runner profile on the top panel as well as bottom guide.
Fantastic flexibility. With Wing 77, you can produce cabinet fronts with two door wings (no more than 25 kg each) or four door wings (no more than 20 kg each). The clever part: the entire door set is free moving! Door sets can also be inter-linked. Surprise your cus-tomers individually tailored folding door solutions for the bedroom or office. Wing 77 gives you the design flexibility to do so.
Folding door systemWing 77 / freely moveableAll the benefits at a glance
65Technik für Möbel
y
x
Performance summary 66 - 67 Technical details in brief Door sizes Operating principle
System components 68 - 69
Planning dimensions 70 - 71
Installation 72 - 74
Accessories 76 - 85
Folding sliding door systemWing 77 / freely moveableSummary
66 www.hettich.com
y
x
Technical details in brief Door size and door weight Folding door system with 2 or 4 door wings Overlay door position For wooden doors Door wing weight up to 20 kg (25 kg) with 4 (2) door wings Door height up to 2400 mm Door wing width up to 400 mm (500 mm) with 4 (2) door wings Height adjustment +/- 3 mm Centre panels recessed 40 mm Tested with 40000 cycles
1000-
2400
400 - 500
≤ 25 ≤ 251000
-2400
400
≤ 20 ≤ 20 ≤ 20 ≤ 20
Door material Number of door wings and door position
16 - 19 mm
Folding door systemWing 77 / freely moveablePerformance summary
see pages 86 - 87
67Technik für Möbel
y
x
Operating principle / 1 folding door with 2 wings40
2 17
48 ± 3
64
C
≥ 55
2
≥ 2
17
40(≥ 35)
26,5
26,2
26,2
26,5
≥ 15
110°
Pivot offset 6 mm
Tandemrunner
Clip on centrehinge
Intermat 9943
Guidecomponent
Damper
Lever to rear
Operating principle / 1 folding door with 4 wings
26,5
4
≥ 45
≥ 6235
13
13
64
48±3
ø 35
402
8
5
3217, 3
1
13
3
9,51
5
ø 5
17 32
11,5Tandem running component
Latch plates
Spacer 2 wings
Spacer spindle4 wings
Clip on centrehinge
Guidecomponent
Stop attachment
Centre guideAdjustablereveal ± 1
End stop Lever
Lever
Stop
"X" spacer
Stop attachment
Damper
Damper
Folding door systemWing 77 / freely moveablePerformance summary
68 www.hettich.com
HettCAD
Set 1 Wing 77 Set contains all the parts required for 1 folding sliding door with
2 panels The inside carcase width of 800 mm should not be exceeded. The top
panel must be designed so that it cannot sag by more than 1.5 mm under the weight of the folded doors.
Set comprises: 2 tandem running components for fast installation 2 brackets for running component with + / - 5 mm height adjustment 2 guide components 4 clip on centre hinges 4 spacers 4 end stops 4 noise absorbing felts (to buffer doors against the carcase) for posi-
tioning at the top and bottom on each door wing Fixing material
Advice: Please order profiles separately
Order no. PU
0 070 986 1 set
Set 2 Wing 77 Set contains all the parts required for 1 folding sliding door with
4 panels The inside carcase width of 800 mm should not be exceeded. The top
panel must be designed so that it cannot sag by more than 1.5 mm under the weight of the folded doors.
Set comprises: 4 tandem running components for fast installation 4 supports for running component with + / - 5 mm height adjustment 1 spacer spindle for tandem running component 3 guide components and centre guide component 2 latch plates 8 clip on centre hinges 4 spacers 4 end stops 8 noise absorbing felts (to buffer doors against the carcase) for posi-
tioning at the top and bottom on each door wing Fixing material
Advice: Please order profiles separately
Order no. PU
0 070 987 1 set
Folding sliding door systemWing 77 / freely moveableSystem components
69Technik für Möbel
HettCAD
Guide profile For screwing on, screw on position predrilled Length 3200 mm Aluminium, silver anodized
Order no. PU
0 070 985 4 ea.
Runner profile For screwing on, screw on positions predrilled Length 3200 mm Aluminium, silver anodized
Order no. PU
9 193 574 4 ea.
Folding sliding door systemWing 77 / freely moveableSystem components
70 www.hettich.com
Installation dimensions for Wing 77 for 1 folding door with 2 wings
19
1 - 5
1 - 5
≥ 60
ca. R10
≤ 19 ≤ 25
≤ 19 ≤ 25
≈ R 10
≈ R 1≈ R 10
1 - 5
160
20 - 50
≤ 500
LK
16,5 17 17,5 18 18,5
5 4 3 2 1
C 64
27
20
27
20
64
B*
C
ø 35 x 11,5
ø 35 x 11,5
2-wing door set
2-wing folding doorDoor width 1000 mm max. Door weight / wing 25 kg max. Door wing height 2400 mm max.
Drilling patterns
Door wing contours and reveals(as finger protection)
Radius as large as possible
Reveal depends on the seal that is used
Reveal depends ony the seal that is used
Reveal depends on the seal that is used
Calculation of door width / door wing widthDoor width = inside carcase width + (2 x overlay*)Door wing width = (inside carcase width – 1 x reveal + 2 x overlay*) ÷ 2* Overlay: max. 15 mm, C dimension 6 mm
2-wing folding door
Clip oncentre hinge
Tandemrunningcomponent
Outer guidecomponent
Overlay Reveal
Drill hole spacing * mm
Reveal mm
Tandemrunning component
Clip oncentre hinge
Outer guide component
LH +wingthickness-13
Folding sliding door systemWing 77 / freely moveablePlanning dimensions
71Technik für Möbel
Installation dimensions for Wing 77 for 1 folding door with 4 wings
19
1 - 5
1 - 5
≥ 60
ca. R10
≤ 19 ≤ 25
≤ 19 ≤ 25
≈ R 10
≈ R 1≈ R 10
1 - 5
C 64
27
20ø 35 x 11,5
27
20
ø 35 x 11,5
≥ 27
64
B* 15
32
ø 10 x 11,5
27
20
ø 35 x 11,5C*
C* 64
27
20ø 35 x 11,513
64
B*
C64
27
20ø 35 x 11,5
27
20
ø 35 x 11,5C C
LK
240
20 - 50
≤ 400
16,5 17 17,5 18 18,5
4 4,5 5 5,5 6
5 4 3 2 1
4-wing door set
4-wing folding doorDoor width 1600 mm max. Door weight / wing 20 kg max. Door wing height 2400 mm max.
Drilling patterns
Door wing contours and reveals(as finger protection)
Radius as large as possible
Reveal depends on the seal that is used
Reveal depends on the seal that is used
Reveal depends on the seal that is used
Calculation of door width / door wing widthDoor width = inside carcase width + (2 x overlay*)Door wing width = (inside carcasewidth – 3 x reveal + 2 x overlay*) ÷ 2* Overlay: max. 15 mm, C dimension 6 mm
Folding door with 4 wings
Tandemrunning component
Tandemrunning component
Clip oncentre hinge
LH +wingthickness -13
Centreguide component
Latchplate
Clip oncentre hinge
Clip oncentre hinge
Tandemrunning component
Tandemrunning component
Spacerspindle
Centreguide component
Latchplate
Outerguide component
Overlay Reveal
* B drill hole spacing mm
* C drill hole spacing mm
Reveal mm
Outerguide component
Folding sliding door systemWing 77 / freely moveablePlanning dimensions
72 www.hettich.com
Installing runner profile
Installing runner profile and end stop
Installation spacers and spacer spindle
Folding sliding door systemWing 77 / freely moveableInstallation
73Technik für Möbel
Preparing door set, left
Preparing door set, right
Folding sliding door systemWing 77 / freely moveableInstallation
74 www.hettich.com
Installing door sets
Door combinationsInstalling spacers X (reveal is not adjustable) on the running and guide components permits door combinations on uninterrupted runner and guide profiles.
Installation information
3
* 0 positionHeight adjustmentwith spindle
Note: installation and removal are only possible in 0-position, i.e. with 3 mm clearance
Folding sliding door systemWing 77 / freely moveableInstallation
76 www.hettich.com
HettCAD
Door profile Predrilled For door thicknesses of 15-16 mm
Material Finish Length mm Quantity for 2-doors Quantity for 3-doors Order no. PU
steel silver, coated 2500 3 4 9 206 249 1 ea.
Aluminium Silver anodized 2050 3 4 9 117 416 1 ea.
Aluminium Silver anodized 2500 3 4 9 130 038 1 ea.
Installation / dimensional drawing
ø 5
20
14
= 66 a2 = 12816,5
29
a1 a7=256
a8= 288 aX
L
Door profile Predrilled For door thicknesses of 18-19 mm
Material Finish Length mm Quantity for 2-doors Quantity for 3-doors Order no. PU
steel silver, coated 2500 3 4 9 206 250 1 ea.
Aluminium Silver anodized 2050 3 4 9 136 107 1 ea.
Aluminium Silver anodized 2500 3 4 9 136 121 1 ea.
Sliding door systemAccessories
Installation / dimensional drawing
ø 5
20
14
= 66 a2 = 12819,5
29
a1 a7=256
a8= 288 aX
L
77Technik für Möbel
HettCAD
Door end profile, L shaped Predrilled For door thicknesses of 15-16 mm
Material Finish Length mm Quantity for 2-doors Order no. PU
steel silver, galvanised 2500 1 9 206 307 1 ea.
Aluminium Silver anodized 2050 1 9 117 418 1 ea.
Aluminium Silver anodized 2500 1 9 136 123 1 ea.
Installation / dimensional drawing
ø 5
16,5
23
14
= 66 a2 = 128a1 a7
=256a8
= 288 aX
L
Sliding door systemAccessories
Door end profile, U shaped Predrilled For door thicknesses of 15-16 mm
Material Finish Length mm Quantity for 3-doors Order no. PU
steel silver, coated 2500 2 9 206 252 1 ea.
Aluminium Silver anodized 2050 2 9 117 420 1 ea.
Aluminium Silver anodized 2500 2 9 130 062 1 ea.
Installation / dimensional drawing
ø 5
23,75
16,5
14
= 66 a2 = 128a1 a7
=256a8
= 288 aX
L
78 www.hettich.com
HettCAD
Door end profile, U shaped Predrilled For door thicknesses of 18-19 mm
Material Finish Length mm Quantity for 3-doors Order no. PU
steel silver, coated 2500 2 9 206 284 1 ea.
Aluminium Silver anodized 2050 2 9 136 108 1 ea.
Aluminium Silver anodized 2500 2 9 136 122 1 ea.
Sliding door systemAccessories
Installation / dimensional drawing
ø 5
23,75
19,5
14
= 66 a2 = 128a1 a7
=256a8
= 288 aX
L
Carcase end profile for rear most door Predrilled
Material Finish Length mm Quantity for 2-doors Quantity for 3-doors Order no. PU
steel silver, coated 2500 1 2 9 206 283 1 ea.
Aluminium Silver anodized 2100 1 2 9 117 462 1 ea.
Aluminium Silver anodized 2500 1 2 9 146 622 1 ea.
Installation / dimensional drawing
ø 5
14,8
17
10a1 = 70 a2 = 352 a1
L
79Technik für Möbel
HettCAD
Carcase end profile for front most door Predrilled
Material Finish Length mm Quantity for 2-doors Order no. PU
steel silver, coated 2500 1 9 206 282 1 ea.
Aluminium Silver anodized 2100 1 9 117 463 1 ea.
Aluminium Silver anodized 2500 1 9 146 624 1 ea.
Installation / dimensional drawing
ø 5
46
14,8
10a1 = 70 a2 = 352 a1
L
Brush sealing strip For dust proof covers Length 2500 mm Self adhesive Grey
Installation / dimensional drawing
8
6,9
4,8
6
10
6,9
Sliding door systemAccessories
Height mm Quantity for 2-doors Quantity for 3-doors Order no. PU
8 3 4 9 206 282 1 ea.
80 www.hettich.com
HettCAD
Connecting strap For connecting segmented sliding doors Galvanised steel
Order no. PU
9 117 506 1 ea.
Sliding door systemAccessories
81Technik für Möbel
HettCAD
Adjustment fitting, aluminium For straightening distorted furniture doors Can also be used as a precautionary measure to prevent doors from
warping For door/front thicknesses of 16 - 25 mm Maximum door / front panel height 2600 mm Length of threaded rod 2000 mm, can be shortened as required Fast, screwless installation and adjustment requiring just one hand Patented system with encapsulated threaded rod For silent door / front movement Covers for ø 35 mm drillings, plastic, silver Covers for groove, aluminium, silver anodized The adjustment fitting can also be used horizontally It is recommended that 2 vertical adjustment fittings are installed
near the outer edge. On large, wide doors, 2 horizontal fittings can be used instead or in addition
Set comprises: 2 adjustment fittings
Order no. PU
9 117 303 1 set
Technical information
2 x
14
ø 35
16 - 25 12,511
1986
1986
1. 2. 3.
1.
2.
3.
3.
1.
2.
3.
3.
Sliding door systemAccessories
82 www.hettich.com
HettCAD
Adjustment fitting, plastic For straightening distorted furniture doors Can also be used as a precautionary measure to prevent doors from
warping For door / front panel thicknesses from 16 mm Maximum door / front panel height 2600 mm Installing the fitting is simple and straightforward: a pair of threaded
rods, one with a right-hand thread and one with a left-hand thread, are fed into a clamping sleeve
The threaded rods are each additionally supported in a housing that slots into a 35 mm drilling where it is screwed into place
Turning the clamping sleeve produces tensile or compressive force that corrects warping or bowing
The housing, clamping sleeve and threaded rods are covered to pre-vent damage to wardrobe and laundry
The adjustment fitting can also be used horizontally It is recommended that 2 vertical adjustment fittings are installed
near the outer edge. On large, wide doors, 2 horizontal fittings can be used instead or in addition
Set comprises: 1 housing with right-hand threaded rod 1 housing with left-hand threaded rod 1 clamping sleeve 1 plastic cover plate 2 plastic cover strips 2 retainers for cover strips
Order no. PU
0 045 198 2 set
Technical information
ø 35 T = 12,5
T = 8
111920
> 16
Housing withleft-hand threaded rod
Plastic cover strip
Plastic cover plate
Clamping sleeve
Housing withright-hand threaded rod
Sliding door systemAccessories
83Technik für Möbel
HettCAD
Brush sealing strip For dust proof seals Length 2500 mm Height 27 mm Plastic, brown
Order no. PU
0 026 453 40 ea.
Technical information
Side panel
Rear most door
Carcase
Front most door
Sliding door systemAccessories
84 www.hettich.com
HettCAD
Spacer roller For tall sliding doors Galvanised steel
Order no. PU
0 027 740 10 ea.
Technical information
ø 5
28
46
Centre panel
Rear most door
Carcase
Front most door
Direct fixing screw
Sliding door systemAccessories
85Technik für Möbel
HettCAD
Sloping ceiling adapter For angles of 19° - 59° Load capacity max. 50 kg Height 125 mm Depth 94 mm Width 57 mm White plastic
Set comprises: 2 sloping ceiling adapters
Order no. PU
0 045 319 5 set
Technical information
Sliding door systemAccessories
86 www.hettich.com
300 400 500 600 700 800 900 1000 1100 1200 1300 1400 1600 1800 2000
300 1,2 1,6 2,0 2,4 2,8 3,2 3,6 4,0 4,4 4,8 5,2 5,6 6,4 7,2 8,0400 1,6 2,1 2,7 3,2 3,7 4,3 4,8 5,3 5,9 6,4 6,9 7,5 8,5 9,6 10,6500 2,0 2,7 3,3 4,0 4,7 5,3 6,0 6,7 7,3 8,0 8,7 9,3 10,6 12,0 13,3600 2,4 3,2 4,0 4,8 5,6 6,4 7,2 8,0 8,8 9,6 10,4 11,2 12,8 14,4 16,0700 2,8 3,7 4,7 5,6 6,6 7,5 8,4 9,3 10,2 11,2 12,1 13,0 14,9 16,8 18,6800 3,2 4,3 5,3 6,4 7,5 8,5 9,6 10,6 11,7 12,8 13,8 14,9 17,0 19,2 21,3900 3,6 4,8 6,0 7,2 8,4 9,6 10,8 12,0 13,2 14,4 15,6 16,8 19,2 21,6 23,91000 4,0 5,3 6,7 8,0 9,3 10,7 12,0 13,3 14,6 16,0 17,3 18,6 21,3 23,9 26,61100 4,4 5,9 7,3 8,8 10,2 11,7 13,2 14,6 16,1 17,6 19,0 20,5 23,4 26,3 29,31200 4,8 6,4 8,0 9,6 11,2 12,8 14,4 16,0 17,6 19,2 20,8 22,3 25,5 28,7 31,91300 5,2 6,9 8,7 10,4 12,1 13,8 15,6 17,3 19,0 20,8 22,5 24,2 27,7 31,1 34,61400 5,6 7,5 9,3 11,2 13,0 14,9 16,8 18,6 20,5 22,3 24,2 26,1 29,8 33,5 37,21600 6,4 8,5 10,7 12,8 15,0 17,0 19,2 21,3 23,4 25,6 27,7 29,8 34,1 38,3 42,61800 7,2 9,6 12,0 14,4 16,8 19,2 21,6 24,0 26,3 28,7 31,1 33,5 38,3 43,1 47,92000 8,0 10,6 13,3 16,0 18,6 21,3 23,9 26,6 29,3 31,9 34,6 37,2 42,6 47,9 53,22200 8,8 11,7 14,6 17,6 20,5 23,4 26,3 29,3 32,2 35,1 38,0 41,0 46,8 52,7 58,52400 9,6 12,8 16,0 19,2 22,3 25,5 28,7 31,9 35,1 38,3 41,5 44,7 51,1 57,5 63,92600 10,4 13,8 17,3 20,8 24,2 27,7 31,1 34,6 38,0 41,5 45,0 48,4 55,3 62,2 69,2
300 400 500 600 700 800 900 1000 1100 1200 1300 1400 1600 1800 2000
300 1,5 2,1 2,6 3,1 3,6 4,1 4,6 5,1 5,6 6,2 6,7 7,2 8,2 9,2 10,3400 2,1 2,7 3,4 4,1 4,8 5,5 6,2 6,8 7,5 8,2 8,9 9,6 10,9 12,3 13,7500 2,6 3,4 4,3 5,1 6,0 6,8 7,7 8,6 9,4 10,3 11,1 12,0 13,7 15,4 17,1600 3,1 4,1 5,1 6,2 7,2 8,2 9,2 10,3 11,3 12,3 13,3 14,4 16,4 18,5 20,5700 3,6 4,8 6,0 7,2 8,4 9,6 10,8 12,0 13,2 14,4 15,6 16,8 19,2 21,6 23,9800 4,1 5,5 6,8 8,2 9,6 10,9 12,3 13,7 15,1 16,4 17,8 19,2 21,9 24,6 27,4900 4,6 6,2 7,7 9,2 10,8 12,3 13,9 15,4 16,9 18,5 20,0 21,6 24,6 27,7 30,81000 5,1 6,8 8,6 10,3 12,0 13,7 15,4 17,1 18,8 20,5 22,2 23,9 27,4 30,8 34,21100 5,6 7,5 9,4 11,3 13,2 15,1 16,9 18,8 20,7 22,6 24,5 26,3 30,1 32,9 37,61200 6,2 8,2 10,3 12,3 14,4 16,4 18,5 20,5 22,6 24,6 26,7 28,7 32,8 36,9 41,01300 6,7 8,9 11,1 13,3 15,6 17,8 20,0 22,2 24,5 26,7 28,9 31,1 35,6 40,0 44,51400 7,2 9,6 12,0 14,4 16,8 19,2 21,6 23,9 26,3 28,7 31,1 33,5 38,3 43,1 47,91600 8,2 10,9 13,7 16,4 19,2 21,9 24,6 27,4 30,1 32,8 35,6 38,3 43,8 49,3 54,71800 9,2 12,3 15,4 18,5 21,6 24,6 27,7 30,8 33,9 36,9 40,0 43,1 49,3 55,4 61,62000 10,3 13,7 17,1 20,5 23,9 27,4 30,8 34,2 37,6 41,0 44,5 47,9 54,7 61,6 68,42200 11,3 15,5 18,8 22,6 26,3 30,1 33,9 37,6 41,4 45,1 48,9 52,7 60,2 67,7 75,22400 12,3 16,4 20,5 24,6 28,7 32,8 36,9 41,0 45,1 49,3 53,4 57,5 65,7 73,9 82,12600 13,3 17,8 22,2 26,7 31,1 35,6 40,0 44,5 48,9 53,4 57,8 62,2 71,1 80,0 88,9
Weight table for chipboard 19 mm
Weight table for MDF 19 mm
Door width mm
Door heightmm
Door width mm
Door heightmm
Door weight in kg (density = 700 kg/m3)
Door weight in kg (density = 900 kg/m3)
Sliding and folding door systemsTechnical informationCalculating door weights
87Technik für Möbel
Calculating weights of doors in alternative door materials
Material
Acrylic glass 1200
Aluminium 2700
Balsa wood 120
Concrete 2400
Lead 11300
Iron 7800
Gypsum plasterboard 900
Glass 2600
Hardboard 1000
Hardwood, wet (beech) 900
Hardwood, dry (beech) 800
Cork 300
To calculate the weight of doors in alternative door materials, the specific density of the door material must be taken into consideration.
The table entries refer to 19 mm thickmaterial.The table entries must be multiplied by afactor in order to adjust to material of di�erentthickness.
Density of various materials in kg/m3
Formula for conversionDoor weight = weight for door in thickness of19 mm from table above x factorExampleChipboard doorH x W x D = 2000 x 1800 x 16Weight shown in table for this door size, butmaterial in a thickness of 19 mm = 47.9 kg
Convert to 16 mm door thickness using factorof 0.84 as shown in table on leftDoor weight = 47.9 kg x 0.84 = 40.2 kg
Material thickness mm
Factor
15 0,7916 0,8418 0,9519 1,0020 1,0522 1,1623 1,2126 1,3729 1,53
Adjustment to di�erent material thicknesses
Example
Door made of acrylic glass with a density of 1200 kg/m3Door height: 2000 mm, door width: 1800 mm, material thickness: 6 mm
Door weight [kg]25,9 kg
Height [m]2= x x x
Width [m]1,8
Material thickness [m]0,006
Density [kg/m3]1200
Density kg/m3
Sliding and folding door systemsTechnical informationCalculating door weights
88 www.hettich.com
Folding door systemTechnical informationQuality criteria
The quality of the sliding door systems is monitored continuously.Hettich fittings comply with the national and international qualitystandards of the markets our customers operate in. The diagramsbelow show some of the tests to which Hettich fittings are subjected.
The door must withstand a defined number of opening and closingcycles at a defined speed.
The door must withstand a specific number of oppening cyclesunder a defined tensile load.
Quality that meets all the demands
Endurance test Closing / extension test
90 www.hettich.com
Hettich and the environment: Committed to responsible practice, active protection, innovative thinking.
Hettich takes a responsibility for the world we live in. This awareness defines the strict policy of environmental management that we practise. Our environmental officer has taken personal responsibility for these aspects through- out the group of companies over a period of many years. In addition, a separate environment committee has been established for each production site. We regard statutory provisions as minimum requirements. At significant sites we also implement the stringent EMAS Regulation. And we drive forward developments that in future will help to save even more raw materials and support the necessary endeavours towards sustainability.
Hettich environmental management
In 1996 Hettich started introducing effective environmen-tal management systems under the stringent EMAS Regu-lation (currently: EC Regulation No. 761/2001, including EN ISO 14.001/2004). This not only enables us to improve
our environmental performance on a broad front but also to achieve a high level of safety which, not least, also benefits our customers. This is why we also require our suppliers to meet the necessary minimum standards of environmental protection, industrial safety, health care and social welfare.The results achieved in the drawer runner and drawer system product segment at the Kirchlengern operation in Germany illustrate the impressive effects these measures have and verifiably demonstrate our tireless endeavours to translate words into action:
Relief to the environment between 1997 and 2008:
Specific water consumption: 56 per cent Specific power consumption: 21 per cent Specific heat consumption: 84 per cent Specific CO2 emissions: 29 per cent
Hettich and the environment: Committed to responsible practice, active protection, innovative thinking.
91Technik für Möbel
Hettich standard for product materials
Hettich underpins its commitment by applying an internal standard for product materials. This ensures that every pro-duct – from production to disposal – satisfies all environ-mental requirements. Hettich products are durable. Appro-priately foresighted, our rigorous standards are formulated to ensure that international legislation is also met. This provides a reliable base for marketing furniture worldwide.
Zero-energy building - Hettich Forum
The Hettich Forum building with its neutral energy balance is a shining example of future-proof building design. Photovoltaic panels and a solar collection system providing hot water as well as extensive roof greening and use of rain water underscore this building's overall sustainability concept in just the same way as the broad use of cellulose
insulation material from recycled newspapers, highly effi-cient heat recovery and the bulb-free lighting concept do.
With the Hettich Group having acquired European Com-mission GreenBuilding Partner status on 5 March 2009, the comprehensive approach demonstrated by the Hettich Forum has also convinced the adjudicating panel of the national "Green Building Award 2009". Hettich received the first prize to be presented in the "New Building" category.