Post on 14-May-2018
FloorHand FH-80 Pipe FrameWrench & Spinner Combination Tool
SpecificationsSize Range Make-Up Torque Break-Out Torque HPU Requirements**
4” OD – 8 ½” OD* 65,000 ft-lb 80,000 ft-lb 2,500 psi @ 25 gpm
101.6 mm OD – 215.9 mm OD 88,300 Nm 108,500 Nm 172 bar @ 94 l/min
WeightsFloorHand Hanging Unit Power Unit
4,550 lbs 2,200 lbs
2,063 kg 998 kg
Part Numbers (Standard Units)FloorHand Manipulator Winch Power Unit
9GF-1002 9FM-2000 Lift Cylinder Assembly 9FH-10701 9PU-7200** (Equipped with Cooler)
9FM-2200 Pedestal Crane Manipulator 9PU-7300** (Equipped with Heater)
*3 1/8” OD (79.4 mm OD) can be reached via adapter, 9FH-10703.
**It is recommended that the FloorHand is powered by the Blohm+Voss Hydraulic Power Unit (9PU-7200 or 9PU-7300).
FloorHand FH-80 Pipe FrameWrench & Spinner Combination Tool
Blohm + Voss Oil Tools, LLC
www.blohmvoss-oiltools.com
Manufacturer & Agents World Wide
The FloorHand FH-80 has been designed for ease of operation considering the highest standard for safety, while providing a tool to the industry with economics and efficiency in mind.
The FloorHand FH-80 is available as a hanging version or in combination with a manipulator arm for well center and mousehole use.
Benefits:Safety:• Replaces manual tongs• Reduces rig personal exposure• Reduces crew fatigue
Economics:• Low amount of spares• Simple and easy to maintain• No special tools for operation or maintenance
Efficiency:• Simple logic for operating the FloorHand• Fast, repetitive and reliable make-up torque• Self-adjusts to a wide range of pipe sizes
Blohm + Voss Oil Tools GmbHHermann-Blohm-Straße 220457 HamburgGermany
Phone: +49-40-3119-1162 Fax: +49-40-3119-8196 oiltools@blohmvoss.comwww.blohmvoss-oiltools.com
Premier Sea & Land Pte Ltd 54 Loyang Way
Singapore 508747
Phone: +65-6543-1433 Fax: +65-6543-1219
enquiries@mtqpremier.com.sg
HI-Energy ServiceHamriyah Free Zone
Sharjah, UAE
Phone: +971-55-2308-252Fax: +971-4-2980-862
bdm@hi-energyservices.com
Blohm + Voss Oil Tools, LLC7670 Woodway, Suite 266 Houston, Texas 77063United States of America
Phone: +1-713-952-0266Fax: +1-713-952-2807bvot@blohmvoss.com www.blohmvoss-oiltools.com
5.
6.7.
1. 2.
3.
4.
FloorHand FH80 Pipe FrameWrench & Spinner Combination Tool
1. Controls• Simple logic operating handles for FloorHand
and manipulator arm
2. Wrench Clamping• Opposing clamp cylinders self adjust to varying
pipe sizes eliminating the need for manual adjustment
3. Torque Setting• Set torque once on the first connection• Ft-lb read-out directly from gauge• Torque adjustment and gauge located on
FloorHand
4. Universal Die Blocks• One size fits all, eliminating Die Block change outs• Uses standard tong dies• Centering buttons for pipe alignment
5. Spinner Rollers• Clamping force of steel coupled with the
compressibility of Gripthane reduces pipe slipping• Shoulders-Up Pipe connection everytime• Quick and easy roller change out
6. In Line Pressure Filter • Protects critical hydraulic components at the unit• Extends lifetime and reliability by ensuring a clean
hydraulic fluid
7. Self-Adjustable Pipe Stop• Engagement of Die Blocks self-adjusts the pipe
stop to position it for proper pipe centering
FloorHand FH80 Pipe FrameWrench & Spinner Combination Tool