Post on 09-Oct-2020
Floor Mats for Mack Trucks!
Protect your investment with attractive, highly functional floor mats!
• “Patented” floor mat with (PRS) Positive Restraint System flange holds the driver side floor mat in place.
• Heavy Duty borders to catch and retain abrasive debris, caustic materials, liquids, grease and oils harmful to a trucks O.E. flooring.
• Driver’s Cushioning Safety Heel Pad
• High impact absorbing vertical ribs and textured inlay
• Refined Finish floor mats that complement, enhance, and protect truck cab interiors
Part # 85150480Applications; Anthem, Granite, Pinnacle, CXU, GU
RETRO FIT
Advisory• Floor mat part numbers won’t necessarily fit all years, or all configurations for the Truck model listed.• Truck manufacturers make changes to cab interiors periodically that can affect the fit of auxiliary floor mats. • Truck models can have multiple floor plans due to options, accessories, and build variances• To check for proper fit; ensure that the floor mat lays flat against the O.E. flooring, and does not interfere with the con-trol pedals. Please see Installation Instructions on our “Support tab” at www.productsalesco.com for important safety information.
To purchase these products, contact or visit an authorized MACK TRUCKS Dealership Dealer note; available through your PDC program.
RETRO FIT
Part # 9291-1190 (Black)
Part # 9291-1191 (White)
18” wide x 14” long
Part # 9291-M90CF (Black)
Part # 9291-M92CF (Red)
matching quarter fender flap set
Part # 9291-1277 (Black)
24” wide x 6” high
floor mat sets
Part # 9291-C1176
Carpeted inlay with “clean step” corners.
Fits CH600, Superliner & R Series
Part # 9291-1171
Ribbed floor mat set”
Fits CH600, Superliner, and R Series.
With Mounted Chrome Bottom Weights
18” wide x 14” long
Floor MatS and Mud FlapS For “ClaSSiC” MaCk truCkS
retro Fit
front fender flaps• Flaps have a molded in backing reinforcement for reduced sway and durability• Molded mounting bosses in heavy duty border
Part # 9291-1190 (Black)
Part # 9291-1191 (White)
18” wide x 14” long
Part # 9291-M90CF (Black)
Part # 9291-M92CF (Red)
matching quarter fender flap set
Part # 9291-1277 (Black)
24” wide x 6” high
floor mat sets
Part # 9291-C1176
Carpeted inlay with “clean step” corners.
Fits CH600, Superliner & R Series
Part # 9291-1171
Ribbed floor mat set”
Fits CH600, Superliner, and R Series.
With Mounted Chrome Bottom Weights
18” wide x 14” long
Floor MatS and Mud FlapS For “ClaSSiC” MaCk truCkS
retro Fit
front fender flaps• Flaps have a molded in backing reinforcement for reduced sway and durability• Molded mounting bosses in heavy duty border
All mud flaps feature a mold-ed in backing reinforcement layer for increased durability and reduced sail
Part # 9291-1190 (Black) Part # 9291-1191 (White)
Part # 9291-M90CF (Black) Part # 9291-M92CF (Red)With Mounted Chrome Bottom Weights
Part # 9291-127724” wide x 6” high
Part # 9291-1190 (Black)
Part # 9291-1191 (White)
18” wide x 14” long
Part # 9291-M90CF (Black)
Part # 9291-M92CF (Red)
matching quarter fender flap set
Part # 9291-1277 (Black)
24” wide x 6” high
floor mat sets
Part # 9291-C1176
Carpeted inlay with “clean step” corners.
Fits CH600, Superliner & R Series
Part # 9291-1171
Ribbed floor mat set”
Fits CH600, Superliner, and R Series.
With Mounted Chrome Bottom Weights
18” wide x 14” long
Floor MatS and Mud FlapS For “ClaSSiC” MaCk truCkS
retro Fit
front fender flaps• Flaps have a molded in backing reinforcement for reduced sway and durability• Molded mounting bosses in heavy duty border
Part # 9291-1190 (Black)
Part # 9291-1191 (White)
18” wide x 14” long
Part # 9291-M90CF (Black)
Part # 9291-M92CF (Red)
matching quarter fender flap set
Part # 9291-1277 (Black)
24” wide x 6” high
floor mat sets
Part # 9291-C1176
Carpeted inlay with “clean step” corners.
Fits CH600, Superliner & R Series
Part # 9291-1171
Ribbed floor mat set”
Fits CH600, Superliner, and R Series.
With Mounted Chrome Bottom Weights
18” wide x 14” long
Floor MatS and Mud FlapS For “ClaSSiC” MaCk truCkS
retro Fit
front fender flaps• Flaps have a molded in backing reinforcement for reduced sway and durability• Molded mounting bosses in heavy duty border
RETRO FIT
Part # 9291-2006C For Granite, Pinnacle, Rawhide, and Vision Models with new emmisions engines released 2006 Part # 9291-CHVIS For CH and Vision models, pre new emissions
engines.