20

PA

RT5

INTE

LLIG

EN

TR

OB

OT

&A

UTO

MA

TIO

N

FLEXIBLE MANUFACTURING SYSTEM ED-FMS1

1/1

_____• Factory Automation

ED-FMS installed at the system control department of Chungnam Vocational Junior College

» Supply of raw materials» Pallet tool

Supply Process

» Stores at the cell designated by crane» Stores according to color and materials» Selecting and taking at the time of cell is full

Storing Process

» Telling the colors» Providing the cover of same color and materials» Providing the screws and fixing

Classifying and Assembling Process

» Measures the thickness ofraw materials

» Re-supply after eliminatingthe defective materials

Inspection Process

» Drill processing» Tap processing» Eliminating chip

Processing Process

Monitoring and control screen for FMSwhole process

Monitoring and control screen for FMSinspection process

Monitoring and control screen for FMSprocessing process

> SPECIFICATIONS

SYSTEM CONFIGURATION

• Supply Process» Pallet supplier

(size of pallet : 200(W) x 10(H) x 200(D)mm» PTP robot(place to place robot)» Material supplier and magazine

• Inspection Process» Dimension measuring meter(measuring the thickness)» Load’g/unload’g rotative cylinder» Small conveyor» Loadless cylinder(load’s device) and gripper» 2nd material supplier and magazine

• Processing Process» 180˚ rotative arm cylinder» Gripping device» Drilling processor

» Device of eliminating the chip» Tap processor» Transmitting slide» Classifying and assembling process» 180˚ rotative arm cylinder» 4 dividing indexing table» Separator» Rotative cylinder, parts supplier and magazine(3set)» Screw Fastener and Screw Supplier

• Storing Process» Rotative cylinder(Vacuum type)» Automatic warehouse loader» Storing cell(3 x 4)» Conveyor for releasing the finished products» Main Conveyor