Slide the boot onto the cable.

Solder the wire ends.

Position the chuck onto the cable and align

chuck with plugfinger.

Slide the housing onto the Plugfinger with

chuck.

Finish the installation by tighten the bushing

onto the connector.

Prepare cable as shown.

Attention: If using a cable with big O.D. break

off marked part on the chuck.

A

B

C

E

F

A

D

B

C

ASSEMBLY INSTRUCTION

NYS 373-* Heavy duty Phono Plug|

Draft. Nr.: BDA 262-0 Update: 21.01..2010/ 3102M1811 I I Data subject to change without prior notice. 2010 NEUTRIK . ALL RIGHTS RESERVED.© ®

NEUTRIK AG

NEUTRIK USA Inc.

NEUTRIK UK Ltd.

NEUTRIK

T: F:

T: F:

( ) T: F:

T: F:

LI

USA

UK

DE / NL / AT/DK

+423 / 237 24 24 +423 / 232 53 93

+1 732 / 901 9488 +1 732 / 901 9608

+44 1983 / 811 441 +44 1983 / 811 439

+49 8131 / 280 890 +49 8131 / 280 830Vertriebs GmbH

www.rean-connectors.com

NEUTRIK France

NEUTRIK Tokyo Ltd.

NEUTRIK

FR

JP

HK

T: F:

T: F:

Ltd. T: F:

+33 1 / 4131 6750 +33 1 / 4131 0511

+81 3 / 3663 4733 +81 3 / 3663 4796

+852 / 2687 6055 +852 / 2687 6052Hong Kong

6.0 mm [0.24”]

8.0 mm [0.32”]

3.0 mm [0.12”]

1.2.

break off

D

F

E