Post on 16-Apr-2017
FEMALE CADET UNIFORM
Does your shirt have the gap between buttons?
If it does, then use this button as the guide
Does your shirt have the gap between buttons?
If it does NOT, then use this button as the guide
Use a ruler (or edge of paper) to establish a horizontal line along the to edge the button
Suggestion: I used straight pins to place alone the edge of the ruler to establish the line. This allowed me to get rid of the ruler.
Place the nameplate and ribbons where the bottom touches the pins. Once they are in place remove the pins.
The space between the center of the button and the edge of the nameplate should be the same as the space between the center of the button and the edge Of the ribbons.
The star is placed ¼” above the nameplate and centered.
The unit crest is placed 1/8” above the star.
Use a straight edge (ruler or paper) to ensure the center of the crest, star, and nameplate are lined up.
If “Tabs” are worn they are centered below the nameplate. How far below is determined by the cadets build.
If more than one Tab is worn they will be place 1/8” apart.
If marksmanship badge is worn it is place 1/8” below the ribbons and centered.