FEM Simulations of Non-linear Interactions of Waves and ... · Triangular 6-node prism element 6 5...

FEM Simulations of Non-linear Interactions of Waves and Floating Structures

Professor Guo Xiong Wu

The LRET Research CollegiumSouthampton, 11 July – 2 September 2011

Professor G. X. Wu Department of Mechanical Engineering

University College Londongx_wu@meng.ucl.ac.uk

FEM simulation of nonlinear interactions of waves and floating structures in the context of carbon capture and transportation into ocean spaces

Governing Equations and Boundary Conditions

The fluid is assumed to be incompressibleand inviscid，and the flow is irrotational.

On the free surface:

On the body surface:

221 gz

Pressure p=0Governing equation: 02

Fully nonlinear solution

Mesh Generation

Element types

8-node quadrilateral element

(-1,0)

(-1,1)(0,1)

(-1,1)(0,-1)

(-1,-1)

20-node brick element

(-1,0,-1)

(-1,0,1)

(1,1,-1)

(1,-1,-1)

(1,1,-1)

(1,1,1)

Triangular 6-node prism element

3-node triangular element

The fluid domain is subdivided into many simplezones, in which mesh may be generated moreeasily. A multi-block mesh is then generated byunifying all grids in the simple zones together;

The numbers of nodes on the boundary of eachzone should be provided.

Multi-block structured meshes

Multi-block structured meshes…

Mesh 5

Mesh 1

Mesh 2

Mesh 3

Mesh 4

A multi-block mesh for a circular cylinder formed by combining five simple meshes together

Mesh for two circular cylinders (8-node quadrilateral element)

Mesh for four circular cylinders (8-node quadrilateral element)

Mesh for five floating semicircular cylinders (8-node quadrilateral element)

Mesh for eight floating rectangular cylinders (8-node quadrilateral element)

Multi-block Structured Meshes…

3D mesh for a twin Wigley ship (20-node brick element)

Delaunay and tri-tree methods: only requiresboundary information including nodes andelement numbers.

Unstructured meshes

2D unstructured meshes

a) To improve the numerical stability;

b) To use 2-D smoothing techniques.

•Using hybrid mesh:

Unstructured meshes…

Unstructured Meshes…(a)

(a) Unstructured mesh without smoothing; (b) Hybrid mesh with smoothing applied within structured mesh (Wu, Ma & Eatcok Taylor 1996, 21st ONR, Trondheim)

Unstructured meshes…

Seven truncated cylinders (6-node prism element)(Wang & Wu, J.Fluids & Strus 2006)

Seven bottom-mounted cylinders (6-node prism element)

Finite Element Method

JJI SIdNfNdSfNdNN

JJ zyxN ,,

Velocity potential is written in terms of the shape functions:

02 dNI

The Galerkin method:

Discretised equation after using the Green’s identity:

Discretisation of equation

pI SI 321 ,,

ppJIIJ SJSIdNNA

nII SIdNfNdSfNB

Matrix form of the equation

Direct method: the Gaussian elimination orCholesky method is employed to solve thelinear (sparse and) symmetric system andCuthill-McKee method to optimize bandwidth;

Iterative method: the conjugate gradientmethod with a symmetric successive overrelaxation (SSOR) preconditioner is used andonly nonzero elements in the stiffness matrixare stored.

Solve the linear system

Calculate first-order (velocity) and second- order derivatives

Method by differentiating the shape function;

Difference method;

Galerkin method (Global projection method).

Nx 111

Method by differentiating the shape functions

(Wang, Wu & Drake, 2007, Ocean Eng.)

Employ a cubic polynomial to express the velocitypotential along the vertical direction :(Ma, Wu &Eatock Taylor 2001, Int.J. Nume. Meth. in Fluids)

32 dzczbza 232 dzczb

On the free surface:

)(),,(z

. and + nodesby formed vector a ),1,2,=( of components the

are & , and

Differential method

Galerkin method(Wu & Eatock Taylor, App. Ocean Res 1994)

0)( dNu i

}]{[}]{[ BuA

dNNBdNNA jiijjiij

In matrix form:

Equation to Calculate the Force

dsngzFbS

0 1 2 3 4 5Time

The Force acting on the body

Problems with evaluation of : instability andsawteeth behaviour

Evaluation of :(Wu, J. Fluids & Strucs. 1998)

In the fluid domain : 02 t

On the free surface: gzt 21

On the moving boundary:

)]([.).(

nnUnrU

To employ high order shape functions to calculatethe second order derivatives directly.

To introduce auxiliary functions to avoidcalculating the second order derivatives.

Methods to handle the second order derivatives such as in the moving boundary conditionn /

)6,,2,1( ii

in the fluid domain:

on the body surface:

on the free surface:

on other boundaries:

Introduce auxiliary functions

(Wu & Eatock Taylor 2003, Ocean Eng)

,6)1,2,( )21(

})()](][)[({

iACdsn

dsnVrVnrVF

For multiple structures, the force on i-th body:

Numerical Examples

Comparison with experiment

2-D floating bodies in forced motions ;

2-D resonance problems (second order & fully nonlinear);

2-D solitary wave problems;

3-D sloshing problems .

Using structured mesh

The history of irregular wave at x=3.436 for α=0.612 (Solid line: shorter tank L=14.64; Dash line: longer tank L=44.64; +: experimental data from Nestegard, 1999)

Using structured mesh…

Wave profile at time 0.4s (a) Fully nonlinear result; (b) Experimental result (Retzler et al, 2000); (c) Linear result

Using structured mesh

tAX sin2-D floating bodies in vertical motions

Dimension of trapezoid-shape body

t=7T (A=0.4d,Ka=2) t=7.2T (A=0.4d,Ka=2)

t=7.4T (A=0.4d,Ka=2) t=7.6T (A=0.4d,Ka=2)

t=7.8T (A=0.4d,Ka=2) t=8T (A=0.4d,Ka=2)

snapshots of meshes for single cylinder at different time steps (α=75o)

2-D floating bodies in forced motions tAX sin

0 2 4 6 8 10-2

Fig. Wave histories at (a) x=-2d and (b) x=-3d (Ka=2.0 and A/d=0.4) FEM; BEM

0 2 4 6 8 10-2

0 2 4 6 8 10-4

4 FEM BEM

Comparison of vertical forces between the FEM and the BEM at Ka=2.0 and A=0.4d

Comparisons of waves and forces between FEM and BEM

2-D second-order analysis in time domain: two rectangular cylinders in heave (Wang & Wu, 2008, Ocean Eng.)

tAX sin

Comparison of waves at the right side of cylinder one at the first orderresonant frequency (a) A=0.0125d (b) A=0.025d (c) A=0.05d

0 10 20 30 40-30-20-10

0102030 (c)

0 10 20 30 40-30-20-10

0102030 (b)

0 10 20 30 40-30-20-10

0102030

fully nonlinear; linear; linear+second order

Linear free surface profiles at the first order resonant frequency

-5 -4 -3 -2 -1 0 1 2 3 4 5-30

20 t/T=39.0 t/T=39.2 t/T=39.4 t/T=39.6 t/T=39.8 t/T=30.0

2-D second-order analysis in time domain: two rectangular cylinders in heave (Wang & Wu, 2008, Ocean Eng.)tAX sin

0 10 20 30 40-3

3 Fully nonlinear Linear Linear plus second order

Comparison of waves at the right side of cylinder one =0.54' and A=0.05d

(at the second order resonant frequency )

Using structured mesh… 2-D second-order analysis in time domain: two rectangular cylinders

in heave (Wang & Wu, 2008, Ocean Eng.)tAX sin

Using structured mesh… 2-D fully nonlinear analysis : two rectangular

cylinders in heave (A=0.0125d ) tAX sin

0 50 100 150 200-100

Comparion of waves at the right side of cylinder one at the first order resonant frequency

Fully nonlinear Linear Linear+second order

Wave profiles at A=0.05d (at the first order resonant frequency)

2-D fully nonlinear analysis : two rectangular cylinders in heave tAX sin

Waves and forces at the second order resonant frequency

160 180 200-4

F y/gd

t/T160 180 200

F x/gd

A t/T160 180 200

2-D fully nonlinear analysis : two rectangular cylinders in heave (A=0.2d)tAX sin

Using structured mesh… 2-D fully nonlinear analysis : nine wedge-shaped

cylinders in heave tAX sin

0 10 20 30 40 190 192 194 196 198 200-30

Histories of hydrodynamic forces at first order resnonat frequency and A=0.005d

F y/gd

Cylinder 1 Cylinder 2 Cylinder 3 Cylinder 4 Cylinder 5

0 10 20 30 40 190 192 194 196 198 200-40

Histories of waves at the midpoint of two neighboring cylindersat first order resnonat frequency and A=0.005d

cylinders 1 and 2 cylinders 2 and 3 cylinders 3 and 4 cylinders 4 and 5

Wave profiles at t/T=45, 45.04, 45.08,…,47.32 atA=0.04d.

(at the first order resonant frequency )

Using structured mesh… 2-D solitary wave problems

Finite element mesh for two solitary waves colliding with each other (8-node quadrilateral element)

2-D solitary wave problems

Wave profiles for two waves colliding with each other(L=10Leff, H1=0.6h, xp1=3Leff, H2=0.2h, xp2=7Leff ,where Leff is the efficient wave length )

Wave profiles for one wave overtaking another(L=25Leff, H1=0.6h, xp1=3Leff, H2=0.2h xp2=5Leff )

Wave profiles for a solitary wave propagates over a step(a) without step (b) with step

35 40 45 50 55 60 65 70 75-0.5

Fully nonlinear Computaiton by Seabra-Santos et al (1987) Experiment by Seabra-Santos et al (1987)

Comparison of histories of waves at x=21m(a solitary wave propagates over a step)

0 20 40 60 80-0.2

0.6 0 20 40 60 80-0.2

Histories of waves at the (a) left side and (b) right side of the cylinder

H/h=0.1 H/h=0.2 H/h=0.3

(Interactions of solitary waves with a floating rectangular cylinder)

0 20 40 60 80-1.5

2.0 0 20 40 60 80-1.5

F y/gd

H/h=0.1 H/h=0.2 H/h=0.3

Histories of hydrodynamic forces on the cylinder

(Interactions of solitary waves with a floating rectangular cylinder)

Using structured mesh… 3-D sloshing problems (Wu, Ma Eatock Taylor 1998,

Applied Ocean Res)

Snapshots of free surface in some cases

3-D sloshing problems (Wu, Ma Eatock Taylor 1998, Applied Ocean Res)

2-D wave-making problem;

2-D wave radiation by floating wedged-shape bodies;

2-D solit

3-D large amplitude motions of vertical cylinders and motions of a floating FPSO;

3-D wave-making problem for non-wall-sided cylinders;

3-D second-order diffraction by multiple cylinders in the time domain;

3-D wave-making problem for multiple cylinders;

3-D wave radiation by multiple cylinders.;

Using unstructured mesh

Sketch of a tank

Wave maker

Using unstructured mesh…

)/,/5539.1 ,sin( ghthgtAX

2-D wave-making problems (Wang & Wu 2006, J. Fluids & Strucs.)

0 5 10 15 20 25-0.10

0.15 Fully nonlinear Linear Linear plus second order

Comparison of wave histories at x=1.167h (A/h=0.05)

2-D wave-making problems (Wang & Wu, 2006)

Wave profile in the tank at =24.26 (A/h=0.1)

Wave profile at τ=58.63 (a wedged-shape body in the tank)

2-D wave-making problems (Wang & Wu, J. Fluids & Struc. 2006)

2-D wave radiation by floating wedged-shape bodies (Wang & Wu 2006, J. Fluids & Strus.)

Sketch of a floating wedge

)/ ,sin,2( hgtAYdh

Single wedge )75,4.0,2( odA

2-D wave radiation by floating wedged-shape bodies (Wang & Wu 2006, J. Fluids & Strucs.)

Twin wedges )75,1.0,2( odA

2-D wave radiation by floating wedged-shape bodies (Wang & Wu 2006, J. Fluids & Strucs.)

3-D large motions of vertical cylinders (Wu & Hu, 2004,Proc. Roy. Soc. London)

Wave profiles by two cylinders undergoing periodic oscillation at t=T, 2T, …, 6T

0 10 20 30 40 50 600

Time history of the displacement of the FPSO at A =0.01h

Wave profile around a FPSO

Motions of a FPSO in a tank (Wu & Hu 2004, Proc. Roy. Soc. London)

0.25hcylinder

Dimension of truncated cylinder with flare

still water surface

3-D wave-making problem for non-wall-sided cylinders (Wang, Wu & Drake, Ocean Eng. 2007)

Sketch of a 3-D tank)sin,1416.0,7,72.0,12( tAXhrhLhBhL wc

0 10 20 30 40 50 60-2

Comparison of wave histories for two bottom mounted cylinders at A/h=0.04(=2,x=Lwc-2r)

Free surface around the cylinder (α=75o)

Incident waves

Four-cylinder cases

Four-cylinder cases at the second order trapped mode frequency (Wang & Wu 2006, J. Fluids & Strucs.)

10 15 20-4

t/T10 15 20

10 15 20-4

(d)(c)

10 15 20-4

Wave histories for cylinders one, two and three at k0a=0.468(a) A1; (b) B1; (c) A2; (d) B2; (e) B3; (f) A3

linear; second order; linear plus second order

Four-cylinder cases at the second order trapped mode frequency(Wang & Wu 2006, J. Fluids & Strucs.)

10 15 20-10-505

Histories of force and moment on cylinder two at k0a=0.468 linear; linear plus second order

10 15 20-4-2024

F y/ga

10 15 20-15-10-505

10 15 20-10-505

F x/ga

Wave profiles at t=16T(a) linear; (b) linear plus second order

(a) (b)

3-D wave-making problem for multiple cylinders (Wang & Wu 2010, Ocean Eng)

Sketch of the 3-D tank

3-D wave-making problem for multiple cylinders.

Wave profile at τ=127.8 and A=0.02h

(Seven cylinder cases , r=0.1416, B=20r, h=1.0, L=18)

Using unstructured mesh… 3-D wave-making problem for multiple cylinders

is close to the trapped mode frequency15.2(Seven cylinder cases, r=0.1416,B=20r, h=1.0,L=18)

(Seven cylinder cases, r=0.1416,B=20r, h=1.0,L=18)

The maximum force is on the middle cylinder (cylinder 4)

3-D wave-making problem for multiple cylinders

(Seven cylinder cases, r=0.1416, B=20r, h=1.0, L=18)

Wave profile at τ=137.63 and A=0.02h ( )

is the trapped mode frequency1057.2

1057.2

(Eighteen cylinder cases, r=0.1416,B=20r)

12121 ,sin (b) and sin )( XXtAXtAXXa

)0.1,4,06.0,5.1,3( kaaLaAadah cy

3-D wave radiation by multiple cylinders: two-cylinder cases in horizontal motions

Meshes around cylinders at t=8T, 8.2T, 8.4T, 8.6T, 8.8T, 9T

tAX sin

)0.1,4,6.0,5.1,3( kaaLaAadah cy

3-D wave radiation by multiple cylinders: four-cylinder cases in vertical motions

The finite element method is efficient in simulations ofnonlinear wave-structure interactions;

Both structured and unstructured meshes can be used inthe simulations. The former is more stable in thesimulation and the and the latter is more suitable forcomplex domains;

Enhanced interactions between multiple structures arestrong at the resonant or the nearly trapped modefrequency.

The waves and forces have strong nonlinear features atthe first and second order resonant or the nearly trappedmode frequency.;

Methods to calculate the velocity still need further study inboth 2-D and 3-D cases when using unstructured meshes.

It is still a big challenge to use fully 3-D unstructuredmeshes in fully nonlinear wave simulations.

Summary

References• Wu, G.X. and Eatock Taylor, R. (1994) "Finite element analysis of two-dimensional

non-linear transient water waves" Appl. Ocean Res.,. Vol.16, pp.363-372• Wu, G.X. and Eatock Taylor, R. (1995) "Time stepping solutions of the two

dimensional non-linear wave radiation problem" Ocean Engineering, Vo.22, pp785-798

• Wu, G.X. (1998) "Hydrodynamic force on a rigid body during impact with liquid", J. Fluids and Structures, Vol.12, pp.549-559

• Wu, G.X., Ma, Q.W and Eatock Taylor, R. (1998) "Numerical simulation of sloshing waves in a 3D tank based on a finite element method", Appl. Ocean Res., Vol.20, pp.337-355

• Ma, Q.W., Wu, G.X. and Eatock Taylor, R. (2001a) "Finite element simulation of fully nonlinear interaction between vertical cylinders and steep waves- part 1: methodology and numerical procedure", Int. J. Nume. Meth. in Fluids, Vol.36, pp265-285

• Ma, Q.W., Wu, G.X. and Eatock Taylor, R. (2001b) "Finite element simulation of fully nonlinear interaction between vertical cylinders and steep waves- part 2: numerical results and validation", Int. J. Nume. Meth. in Fluids, Vol.36, 287-308

References• Hu, P., Wu, G.X. and Ma. Q.W. (2002) “Numerical simulation of nonlinear wave

radiation by a moving vertical cylinder” Ocean Eng., Vol.29, pp.1733-1750 • Wu, G.X. and Eatock Taylor, R. (2003) “The coupled finite element and boundary

element analysis of nonlinear interactions between waves and bodies” Ocean Eng. , Vol.30, pp. 387-400

• Wu, G.X. and Hu, Z.Z, (2004) “Simulation of nonlinear wave interactions between waves and floating bodies through a finite element based numerical tank” Proc. Roy. Soc. London , Vol.A460, pp.2979-2817

• Wang, C.Z. and Wu, G.X. (2006) “An unstructured mesh based finite element simulation of wave interactions with non-wall-sided bodies”, J. Fluids & Structures, Vol.22, pp.441-461

• Wang, C.Z. and Wu, G.X. (2007) “Time domain analysis of second order wave diffraction by an array of vertical cylinders”, J. Fluids & Structures, Vol23, pp.605-631

References• Wang, C.Z., Wu, G.X. and Drake, K. (2007) “Interactions between nonlinear water

waves and non-wall-sided 3D structures”, Ocean Engineering, Vol.34, pp.1182-1196

• Wu, G.X (2007) “Second order resonance of sloshing in a tank”, Ocean Engineering Vol.34, pp.2345-2349

• Wang, C.Z. and Wu, G.X. (2008) “Analysis of second order resonance in wave interactions with floating bodies through a finite element method” Ocean Engineering, Vol.35, 717-726

• Eatock Taylor, R., Wu, G.X., Bai, W and Hu, Z.Z. (2008) “Numerical wave tanks based on finite element and boundary element modelling”, J. of Offshore Mechanics and Arctic Engineering, ASME Vol.130, 03001(1)-03001(8)

• Wang, C.Z. and Wu, G.X., 2010，Interactions between fully nonlinear water waves and an array of cylinders in a wave tank, Ocean Engineering, Vol. 37, pp. 400-417

• Wang, C.Z., Wu, G.X. and B.C. Khoo. (2011).” Fully nonlinear simulation of resonant motion of liquid confined between floating structures”, Computers and Fluids,Vol.44, pp89-101

References• Wang, C.Z., Wu, G.X. (2011).”A brief summary of finite element method

applications to nonlinear wave-structure interactions”, Journal of Marine Science and applications, Vol.10, pp127-138

Thank you!

FEM Simulations of Non-linear Interactions of Waves and ... · Triangular 6-node prism element 6 5...

Documents

Transcript of FEM Simulations of Non-linear Interactions of Waves and ... · Triangular 6-node prism element 6 5...

A Simple Four-node Quadrilateral Finite Element for Plates

Finite Element Analysis for Groove Wander Prediction of ... · 4-node quadrilateral and 3-node triangular elements are used. The threedimensional finite element model as - shown inFigure

LinkedList - UNOjaime/Courses/2125/linkedLists.pdf · May 2004 public class LinkedList extends AbstractList {… private class Node {private Element

normal contact stress code with quad 4 node element

1 CST ELEMENT Constant Strain Triangular Element –Decompose two-dimensional domain by a set of triangles. –Each triangular element is composed by three.

Finite Element Representation of Muscles...Node 179 Node 204 Node 205 Node 206 Node 227 Node 228 Node 229 Node 264 Node 265 Node 266 Node 277 Node 278 Node 279 Figure 3: Force-strain

Triangular Elements in the Finite Element Method...Triangular Elements in the Finite Element Method By James H. Bramble and Milos Zlámal Abstract. For a plane polygonal domain Q and

Quadtree-Based Triangular Mesh Generation for Finite Element Analysis of Heterogeneous Spatial

Four Node Plate Bending Element

The Reconfigurable Cluster Element Reconfigurable Cluster Element Document Version: ... 1.2 The Cluster Element or Node ... 2.2.4 Encoded Timing Channel ...

Node and element resequencing using the Laplacian of a ...

ANSYS Tutorial · its plane and a spur gear tooth are good examples of plane stress problems. ANSYS provides a 6-node planar triangular element along with 4-node and 8-node quadrilateral

CONSTANT STRAIN TRIANGULAR ELEMENT WITH …mech.fsv.cvut.cz/~zemanj/publications/non_ISI_paper_03.pdf · Constant strain triangular element with embedded discontinuity based on partition

A Study of Three-Node Triangular Plate Bending Elements

CE: compute element TP: CE & WN Compute Element Worker Node Installation configuration.

1 TYPICAL ELEMENTS Triangular shell element 6 D.O.F. per node Tetrahedral solid element 3 D.O.F. per node First order elements Linear displacement distribution.

Heat transfer analysis of a 6- Nodal triangular element under steady state

Cronfa - Swansea University Open Access Repository · A new 3-node triangular hybrid displacement function Mindlin-Reissner plate element is developed. Firstly, the modified variational

A Triangular Membrane Element with Rotational Degrees of Freedom.

Triangular Elements in the Finite Element Method€¦ · MATHEMATICS OF COMPUTATION, VOLUME 24, NUMBER 112, OCTOBER 1970 Triangular Elements in the Finite Element Method By …