Post on 27-Mar-2018
FabGear quality products are especially designed for the Metal Fabrication, Welding, Sheetmetal and Engineering trades.
Fabricators Gear 2017
abMASK©©
abGLOVE©©
©©
®®
®®
abPLAS®®
©abDISC©
abPROTEC©©
©©
abSPEC©©
®®
®®
©©
abFLASH©
ab ab
w w w. f a b g e a r . c o m . a uGear
Gear
®
2
Index
Machine Quick Selector Chart ..............................................................................................................................................................Page 3
Multi Process (MIG/STICK/TIG - MST) Machines .............................................................................................................................. Page 4 - 5
GMAW (MIG) Machines .................................................................................................................................................................. Page 6 - 7
FabFINISH ..........................................................................................................................................................................................Page 7
PAC (PLASMA) Machines .....................................................................................................................................................................Page 8
MMAW (STICK) Machines and Products ................................................................................................................................................Page 9
GTAW (TIG) Machines and Products ........................................................................................................................................... Page 10 - 11
MultiLINERS ......................................................................................................................................................................................Page 12
FabDISCS .........................................................................................................................................................................................Page 13
FabWIRE ..........................................................................................................................................................................................Page 14
FabROD ................................................................................................................................................................................... Page 14 - 15
FabSAFE ....................................................................................................................................................................................Page 15, 19
FabGLOVE Welding Gloves and General Gloves ........................................................................................................................... Page 16 - 17
FabSHIELD Welding Helmets ...................................................................................................................................................... Page 18 - 19
FabGear quality products are especially designed for the Metal Fabrication, Welding, Sheetmetal and Engineering trades.
ab ab
w w w. f a b g e a r . c o m . a uGear
Gear
®
3
Machine Quick Selector
®abARC 185i LT Stick & Lift-TIG Inverter Welder
MMAW (STICK)
®abPLAS 15.20 Air Plasma Cutter
®abPLAS 14.18 Combi Inbuilt Compressor
Plasma Cutter
PAC (PLASMA)
®abTIG Mini 200P AC/DC Pulse TIG
Welder
®abTIG Midi 203P AC/DC Pulse TIG
Welder
GTAW (TIG)
abMIG 200i Inverter MIG Welder
abMIG 230i Inverter MIG Welder
GMAW (MIG)
Multi Process (MST)
abMIG 260i Inverter MIG Welder
©MultiARCMIG•STICK•TIG Mini
195i MST Inverter Multi Process Welder
©MultiARCMIG•STICK•TIG 205i MST
Inverter Multi Process Welder
©MultiARCMIG•STICK•TIG 255i MST Inverter Multi Process Welder
Wireless RemoteTechnology
Built in
with Wireless Remote
Technology
®abTIG Maxi 320P AC/DC Pulse TIG Welder
FabGear quality products are especially designed for the Metal Fabrication, Welding, Sheetmetal and Engineering trades.
with Wireless Remote
Technology
P/C FG205iMST
S/C 11205
©MultiARCMIG•STICK•TIG 205i MST
Inverter Multi Process Welder
©MultiARCMIG•STICK•TIG Mini 195i MST Inverter
Multi Process Welder
P/C FG195iMST
S/C 11195
Welding Processes MIG, STICK and LIFT TIG-DC
Amperage Range (MIG)MIG: 25 – 200A, TIG: 10 - 200A, STICK: 10 - 200A
Input Power Lead & Plug supplied for commissioning only!
240 Volt 2.5mm2 with 15A Plug Top
Supply Current (I1eff
) 14.9A in MIG, 18.5A in STICK
Recommended Fuse for Maximum Current & Duty Cycle
20A
Duty Cycles @ 40OC200 Amps @ 40%, 165 Amps @ 60%, 130 Amps @ 100%
Recommended Maximum Welding Thickness 12mm Fillet or Butt
Wire Size Range 0.6 - 1.0mm Steel, 0.9 - 1.0mm Alloy
Warranty Period 2 Years
Weight & Dimensions (LxWxH) 16Kg & 505mm x 210mm x 330mm
• Built-in Synergic programs for Aluminium, Stainless and Mild Steel
• Spool Gun compatible (sold separately)
• EcSET for quick and easy Electronic Control Setting
• 200 Amp maximum output• Multi Process; MIG, STICK and Lift TIG-DC• Intuitive Colour LCD interface• LCD Digital screen, easy to use• Adjustable Burn Back control• 2T/4T Trigger Selection• Wire Inch and Gas Check Controls• MIG/TIG Pre & Post Flow Gas Controls• TIG Downslope Time Control• STICK Hot start & Arc Force Controls• 1Kg or 5Kg Wire Spools• Fan Cooled• Gas or Gasless operation• Quick Fit Euro MIG Gun Connection• Creep-feed (slow run in speed) for soft starts in MIG with no lumps• Optional TIG Torch allows control of Pre/Post Flow and Downslope• Supplied with MIG-Gun, Electrode Holder and Lead, Earth Clamp and Lead,
plus Argon Gas Regulator• Heavy Duty Metal 2-Roll Drive system • Comprehensive Owner’s Manual
Welding Processes MIG, STICK and LIFT TIG-DC
Amperage Range (MIG)MIG: 50 – 200A, TIG: 30 - 170A, STICK: 30 - 170A
Input Power Lead & Plug supplied for commissioning only!
240 Volt 2.5mm2 with 15A Plug Top
Supply Current (I1eff
) 14.9A
Recommended Fuse for Maximum Current & Duty Cycle
15A
Duty Cycles @ 40OC200 Amps @ 20%, 5 Amps @ 60%, 89 Amps @ 100%
Recommended Maximum Welding Thickness 10mm Fillet or Butt
Wire Size Range 0.6 - 0.9mm Steel, 0.9 - 1.0mm Alloy
Warranty Period 2 Years
Weight & Dimensions (LxWxH) 9Kg & 390mm x 170mm x 260mm
• The smallest Multi Process MST machine on the market
• Mini in size, but packs awesome welding power
ab ab
w w w. f a b g e a r . c o m . a uGear
Gear
®
4
Approximately 2 Coke cans high x 3-cans wide!
240V
Single Phase
AC240V
Single Phase
AC
• 200 Amp maximum output• Multi Process; MIG, STICK and Lift TIG-DC• 200A in MIG, 170A in TIG/MMA• Welds Steel, Aluminium and Stainless• Digital Amp & Volt Meters• Latest Inverter Technology• Basic controls, easy to use• Quick Fit Euro MIG Gun Connection• 1Kg or 5Kg Wire Spools• Fan Cooled• Gas or Gasless operation• Metal 2-Roll Drive system• Ideal for light commercial and maintenance work• Simple to use, with an easy set up guide provided• Supplied with spare Feed-Rollers to enable MIG Welding of all metals• Light weight and easy to carry, even with MIG Wire installed• Excellent welding results on pipes, tube, RHS & SHS• Supplied with MIG-Gun, TIG-Torch, Electrode Holder and Lead, Earth Clamp
and Lead, plus Argon Gas Regulator • Comprehensive Owner’s Manual
©MultiARCMIG•STICK•TIG
©
Spool Gun(sold separately)
10mm
Recommended PlateThickness (Max)
W
AR R A N
TY2
YEARW
AR R A N
TY
240 Volt
15A
For Maximum Output
12mm
Recommended PlateThickness (Max)
W
AR R A N
TY2
YEARW
AR R A N
TY
240 Volt
20A
For Maximum Output
FabGear quality products are especially designed for the Metal Fabrication, Welding, Sheetmetal and Engineering trades.
P/C FG255iMST
S/C 11255
©MultiARCMIG•STICK•TIG 255i MST Inverter Multi Process Welder
with EcSET for quick and easy Electronic Control Setting
Welding Processes MIG, STICK and LIFT TIG-DC
Amperage Range (MIG)MIG: 40 – 250A, TIG: 10 - 250A, STICK: 10 - 250A
Input Power Lead & Plug supplied for commissioning only!
240 Volt 2.5mm2 with 15A Plug Top
Supply Current (I1eff
) 19.9A in MIG, 20.6A in STICK
Recommended Fuse for Maximum Current & Duty Cycle
25A
Duty Cycles @ 40OC250 Amps @ 35%, 195 Amps @ 60%, 150 Amps @ 100%
Recommended Maximum Welding Thickness 16mm Fillet or Butt
Wire Size Range 0.8 - 1.2mm Steel, 1.0 - 1.2mm Alloy
Warranty Period 2 Years
Weight & Dimensions (LxWxH) 23Kg & 635mm x 240mm x 430mm
16mm
Recommended PlateThickness (Max)
• Supplied with Synergic and Basic Controls
• Save over 50 User Programs
• Spool Gun compatible (sold separately)
• EcSET for quick and easy Electronic Control Setting
• 250 Amp maximum output• Multi-process; MIG, STICK and Lift TIG-DC• Digital Amp & Volt Meters• Synergic & Basic controls, easy to use• Fine Tuning (Inductance) control• Adjustable Burn Back control• 2T/4T Trigger Selection• Wire Inch Control• Gas Check Control• MIG/TIG Pre & Post Flow Gas Controls• TIG Downslope Time Control• STICK Arc Force Control• Creep-feed (slow run in speed) for soft starts in MIG with no lumps• Quick Fit Euro MIG Gun Connection• 5Kg or 15Kg Wire Spools• Welds Steel, Aluminium and Stainless• Fan Cooled• Gas or Gasless operation
• Supplied with MIG-Gun, Electrode Holder and Lead, Earth Clamp and Lead, plus Argon Gas Regulator
• Heavy Duty Metal Geared 4-Roll Drive system • Comprehensive Owner’s Manual
W
AR R A N
TY2
YEARW
AR R A N
TY
ab ab
w w w. f a b g e a r . c o m . a uGear
Gear
®
5
240V
Single Phase
AC
©MultiARCMIG•STICK•TIG
©
Spool Gun(sold separately)
Inside of machine
240 Volt
25A
For Maximum Output
FabGear quality products are especially designed for the Metal Fabrication, Welding, Sheetmetal and Engineering trades.
• 200 Amp maximum output• Compact & lightweight• Digital Amp & Volt Meters• Latest Inverter Technology• Basic controls, easy to use• Fine Tuning (Inductance) control• Adjustable Burn Back control• 2T/4T Trigger Selection• Quick Fit Euro MIG Gun Connection• 1Kg or 5Kg Wire Spools• Welds Steel, Aluminium and Stainless• Fan Cooled• Gas or Gasless operation• Supplied with MIG-Gun, Earth Clamp and Lead, plus Argon Gas Regulator• Heavy Duty Metal 2-Roll Drive system • Comprehensive Owner’s Manual
ab ab
w w w. f a b g e a r . c o m . a uGear
Gear
®
P/C FG230iMIG
S/C 11230
abMIG 230i Inverter MIG Welder
abMIG 200i Inverter MIG Welder
P/C FG200iMIG
S/C 11200
Welding Processes Gas Metal Arc Welding (MIG)
Amperage Range (MIG) 40 – 200 Amps
Input Power Lead & Plug supplied for commissioning only!
240 Volt 2.5mm2 with 15A Plug Top
Supply Current (I1eff
) 18.6A
Recommended Fuse for Maximum Current & Duty Cycle
20A
Duty Cycles @ 40OC for MIG200 Amps @ 30%, 145 Amps @ 60%, 110 Amps @ 100%
Recommended Maximum Welding Thickness 12mm Fillet or Butt
Wire Size Range 0.6 - 0.9mm Steel, 0.9 - 1.0mm Alloy
Warranty Period 2 Years
Weight & Dimensions (LxWxH) 12Kg & 470mm x 215mm x 400mm
• 230 Amp maximum output• Portable MIG with grunt!• Digital Amp & Volt Meters• Latest Inverter Technology• Basic controls, easy to use• Fine Tuning (Inductance) control• Wire Inch Control• Gas Check Control• Quick Fit Euro MIG Gun Connection• 5Kg or 15Kg Wire Spools• Welds Steel, Aluminium and Stainless• Fan Cooled• Gas or Gasless operation• Supplied with MIG-Gun, Earth Clamp and Lead, plus Argon Gas Regulator• Heavy Duty Metal 2-Roll Drive system • Comprehensive Owner’s Manual
Welding Processes Gas Metal Arc Welding (MIG)
Amperage Range (MIG) 50 – 230 Amps
Input Power Lead & Plug supplied for commissioning only!
240 Volt 2.5mm2 with 15A Plug Top
Supply Current (I1eff
) 24.7A
Recommended Fuse for Maximum Current & Duty Cycle
25A
Duty Cycles @ 40OC for MIG230 Amps @ 50%, 210 Amps @ 60%, 163 Amps @ 100%
Recommended Maximum Welding Thickness 14mm Fillet or Butt
Wire Size Range 0.8 - 1.0mm Steel, 0.9 - 1.2mm Alloy
Warranty Period 2 Years
Weight & Dimensions (LxWxH) 23Kg & 618mm x 240mm x 445mm
• Basic Controls for repeatable easy to use, day-in day-out welding!
• Rugged Reliability!
• Generator Friendly!
• Basic Controls for repeatable easy to use, day-in day-out welding!
• Rugged Reliability!
• Generator Friendly!
6
240V
Single Phase
AC240V
Single Phase
AC
®®
14mm
Recommended PlateThickness (Max)
W
AR R A N
TY2
YEARW
AR R A N
TY
240 Volt
25A
For Maximum Output
12mm
Recommended PlateThickness (Max)
W
AR R A N
TY2
YEARW
AR R A N
TY
240 Volt
20A
For Maximum Output
FabGear quality products are especially designed for the Metal Fabrication, Welding, Sheetmetal and Engineering trades.
ab ab
w w w. f a b g e a r . c o m . a uGear
Gear
®
7
®®
P/C FG260iMIG
S/C 11260
abMIG 260i Inverter MIG Welder
• 250 Amp maximum output• Portable MIG with grunt!• Digital Amp & Volt Meters• Latest Inverter Technology• Basic controls, easy to use• Fine Tuning (Inductance) control• Wire Inch Control• Gas Check Control• Quick Fit Euro MIG Gun Connection• 5Kg or 15Kg Wire Spools• Welds Steel, Aluminium and Stainless• Fan Cooled• Gas or Gasless operation• Supplied with MIG-Gun, Earth Clamp and Lead, plus Argon Gas Regulator• Heavy Duty Metal Geared 4-Roll Drive system • Comprehensive Owner’s Manual
Welding Processes Gas Metal Arc Welding (MIG)
Amperage Range (MIG) 50 – 250 Amps
Input Power Lead & Plug supplied for commissioning only!
240 Volt 2.5mm2 with 15A Plug Top
Supply Current (I1eff
) 27.9A
Recommended Fuse for Maximum Current & Duty Cycle
32A
Duty Cycles @ 40OC for MIG250 Amps @ 50%, 228 Amps @ 60%, 177 Amps @ 100%
Recommended Maximum Welding Thickness 16mm Fillet or Butt
Wire Size Range 0.8 - 1.2mm Steel, 1.0 - 1.2mm Alloy
Warranty Period 2 Years
Weight & Dimensions (LxWxH) 25Kg & 618mm x 240mm x 445mm
• Heavy Duty welding from 240v single phase, with a high duty cycle: 250A @ 50%!
• Rugged Reliability!
• Generator Friendly!
240V
Single Phase
AC
P/C FGFINISH.EP
S/C 14143
• Invented to clean & passivate, polish and mark (etch) on most austenitic & ferritic grades of stainless steels
• Can be used to clean up most welds made on Stainless Steel with the MIG, STICK or TIG processes
• Sealed cabinet construction designed to keep dust and moisture out of harm’s way to IP54 level
• No more pickling paste – easy water-based clean-up for a safer environmentally friendly workplace
• Made in Australia by the market leader in Electro Cleaning technology
• 2 Year Warranty on power unit
The Control Panel:Easy to use, the power mode offers three steps, off, half-power and full power. The function mode offers three steps clean, polish and marking (etching). Coloured coded output terminals make hook-up and setting a breeze.
The Accessories:The FabFINISH system comes complete and is backed up by a whole range of additional accessories.
Before After
Suitable Welding Processes for CleaningGMAW (MIG), SMAW (STICK) and GTAW (TIG)
Input Power 240V x 2.2A 50/60Hz
Rated Output Range 14-35V @ 35-65 Amps
Output CurrentAC and DC dependant on “function mode” selected
Duty Cycle @40oC 100%
Safe Operating Service Temperature -5oC to +55oC
Construction MaterialImpact resistant Polyamide, one piece cabinet, sealed to IP54
Width of Cleaning < 40mm
Thickness of Metal to be Cleaned < 12mm
Maximum Reach with Extension Cables 12m
Country of Manufacture Australia
Weight & Dimensions (LxWxH) 9Kg & 230mm x 160mm x 350mm
SS300
ab ab
w w w. f a b g e a r . c o m . a uGear
Gear
®
POWERMODE
FUNCTIONMODE
abFINISH
Electro Clean, Polish and Marking machine for Stainless Steels
HALF
FULL
OFF
POLISH
CLEAN
MARK
abFINISH Clean, Polish and Marking Machine for
Stainless Steels
W
AR R A N
TY2
YEARW
AR R A N
TY
©©
16mm
Recommended PlateThickness (Max)
W
AR R A N
TY2
YEARW
AR R A N
TY
240 Volt
32A
For Maximum Output
FabGear quality products are especially designed for the Metal Fabrication, Welding, Sheetmetal and Engineering trades.
®abPLAS 15.20 Air Plasma Cutter
®abPLAS 14.18 Combi In-built Compressor Plasma Cutter
P/C FG1316iPLAS
S/C 49891
P/C FG1418PLAS.COMBi
S/C 14135
• Cuts; Mild & Carbon Steels, Aluminium, Brass, Bronze, Copper and Stainless
• The plasma stream runs off clean compressed air• Lightweight and easy to use• Back striking ignition• No HF interference• High Voltage stable cutting arc• Fast cutting speed• Simple Operation, easy to understand
control panel• Drop down protection cover• Small size; compact, lightweight, &
portable• Easy torch fitting, Quick fit gas connections• Built in warning systems• Distance, Drag & Extended consumable options available• Wide Input voltage range• Supplied with a 6m Plasma cutting torch – Surecut PT60• Comprehensive Owner’s Manual
©20
17 S
upag
as
20mmMaximum Severance Cut
Arc Process Plasma Arc Cutting (PAC)
Power Supply (Voltage) 1-Phase 216 - 264 Volts
Frequency Hertz 50/60 Hz
Rated Input Power (kW) 6.0kW (240v), 4.7 (220v)
Input Power Lead & Plug supplied for commissioning only!
240 Volt 2.5mm2 with 15A Plug Top
Supply Current (I1eff
) 19.4A
Power Factor 0.75
Amperage Range 20 – 40 Amps
Duty Cycles @ 40OC40Amps @ 60%, 35Amps @ 80%,31Amps @ 100%
Pierce Hole Cutting 8mm
Quality Cutting 14mm
Maximum Cutting (Severance Cut) 18mm
Recommended Air Pressure 115L/min @ 5.5Bar
Max. Open Circuit Voltage 220V
Weight & Dimensions (LxWxH) 18Kg & 580mm x 1215mm x 410mm
©20
17 S
upag
as
18mmMaximum Severance Cut
• A truly portable Air-Plasma metal cutting machine
• Plasma Arc Cutting (PAC) of Steels and Alloys from 240V single-phase power
• Cuts; Mild & Carbon Steels, Aluminium, Brass, Bronze, Copper and Stainless
• The FabPLAS 14.18 Combi is designed to go the places you go; on site, up stairs, in lifting platforms/scissor-lifts and around the work site, all without the hassle of having to connect up to an air compressor unit
• Built in warning systems• Distance, Drag & Extended consumable options available• Wide Input voltage range• Supplied with a 6m Plasma cutting torch – Surecut PT60• Increase your cutting performance even further, by connecting to an external
air supply to increase the cutting speed. This feature overrides the built-in compressor making it a combination air supplied machine - Combi!
• Comprehensive Owner’s Manual
240 Volt
15A
240 Volt
20A
abPLAS 15.20 AIR
AMPS (A)
ON
SET
25 30
35
40 THICKTHIN 20
W
AR R A N
TY2
YEARW
AR R A N
TY
W
AR R A N
TY2
YEARW
AR R A N
TY
ab ab
w w w. f a b g e a r . c o m . a uGear
Gear
®
8
240V
Single Phase
AC240V
Single Phase
AC• Generator Friendly• Quality Cutting
15mm• Maximum Cutting
20mm
• COMBI = Combination Air Supply, - In-built Compressor - Also runs off External Air Compressors
• Quality Cutting 14mm
• Maximum Cutting 18mm
abPLAS®®
For Maximum OutputFor Maximum Output
COMING SOON
Arc Process Plasma Arc Cutting (PAC)
Power Supply (Voltage) 1-Phase 90 - 275 Volts
Frequency Hertz 50/60 Hz
Rated Input Power (kW) 4.6kW (240v), 4.9 (220v)
Input Power Lead & Plug supplied for commissioning only!
240 Volt 2.5mm2 with 15A Plug Top
Supply Current (I1eff
) 14.7A
Power Factor 0.99
Amperage Range 20 – 40 Amps
Duty Cycles @ 40OC40Amps @ 60%, 35Amps @ 80%,31Amps @ 100%
Pierce Hole Cutting 8mm
Quality Cutting 15mm
Maximum Cutting (Severance Cut) 20mm
Recommended Air Pressure 110L/min @ 5.0Bar
Max. Open Circuit Voltage 320V
Weight & Dimensions (LxWxH) 7.5Kg & 510mm x 150mm x 280mm
FabGear quality products are especially designed for the Metal Fabrication, Welding, Sheetmetal and Engineering trades.
®abARC 185i LT Stick & Lift-TIG Inverter Welder
P/C FG185iARC
S/C 14102
Welding Processes GTAW (TIG) and MMAW (STICK)
Amperage Range (MIG) 20 – 185 Amps
Input Power Lead & Plug supplied for commissioning only!
240 Volt 2.5mm2 with 15A Plug Top
Supply Current (I1eff
) 15.8A (STICK), 10.0A (TIG)
Recommended Fuse for Maximum Current & Duty Cycle
20A
Duty Cycles @ 40OC for MIG185 Amps @ 20%, 143 Amps @ 60%, 83 Amps @ 100%
Recommended Maximum Welding Thickness
16mm Fillet or Butt
MMAW Electrode Sizes 2.0mm, 2.5mm, 3.2mm and 4.0mm
Warranty Period 2 Years
Weight & Dimensions (LxWxH) 6Kg & 240mm x 120mm x 200mm
16mm
Recommended PlateThickness (Max)
240 Volt
20A
W
AR R A N
TY2
YEARW
AR R A N
TY
• 185 Amp maximum output• High welding power from 240V single phase• Electronic current control for accurate step-
less adjustment of the welding amperage• Digital Amperage meter for accurate &
repeatable settings• Constant current DC+ or DC- output• Process Selection Switch for STICK and TIG• Suitable for Manual Metal Arc Welding (MMAW)
and DC Lift-Arc Tungsten Inert Gas (TIG) welding• Can be used with 2.0/2.5/3.2mm and 4.0mm
electrodes sizes• Built-in automatic Hot-Start, Arc-Force and
Anti-sticking in MMA mode• Fan Cooled• TIG Torch sold separately• Generator Friendly• Comprehensive Owner’s Manual
ab ab
w w w. f a b g e a r . c o m . a uGear
Gear
®
9
240V
Single Phase
AC• Digital Amperage Meter
®®
For Maximum Output
abREG 300 Argon+ Compact Style, Multi-Entry, Type 10 Regulator
30Lpm Bobbin Flowmeter
P/C FG300AR+REG
S/C 50295
• Side or Bottom Entry• Suitable for MIG or TIG applications• Compact design with integrated
flowmeter• Flowmeter can be viewed from all
angles• Shatter resistant Poly Carbonate
tube flowmeter• Body forged from Class A brass bar• Inlet protected by sintered bronze
filter• External relief valve ensures safety
in use• High quality and robust design
The 3% Mixed Oxide Tungsten’s are universal and suitable for all applications in the whole range of DC and AC welding for non-alloyed and high-alloyed steel, aluminium, titanium, nickel, copper and magnesium alloys etc.
Benefits:• Electrode tip remains “cooler” than Thoriated types• Superior repeatable ignition characteristics• Increased arc stability• Reduced burn off• Higher current carrying capacity• Lower degradation to the electrode tip• Increased application flexibility
3% Mixed Oxide Tungsten’s for TIG Welding
Purple Tip
Product Code Short Code Description
TE3-1.6 51619 1.6mm
TE3-2.4 51620 2.4mm
TE3-3.2 51621 3.2mm
TE3-4.0 51622 4.0mm
TE3-MP 51623 Mixed Sized (pk10) - 4pcs x 1.6mm, 4pcs x 2.4mm, 2pcs x 3.2mm
FabGear quality products are especially designed for the Metal Fabrication, Welding, Sheetmetal and Engineering trades.
Carry Bag included
®abTIG Mini 200P AC/DC Pulse TIG Welder
P/C FG200PmTIG
S/C 12200
ab ab
w w w. f a b g e a r . c o m . a uGear
Gear
®
10
240V
Single Phase
AC
®®
®abTIG Midi 203P AC/DC Pulse TIG Welder
P/C FG203PmTIG
S/C 12203
MMA HF LIFT
SCUS
PC
Pre
BC DSEC
Post
2T 4T
% A HzSec Power Alarm Memory
ARC FORCE
HOTSTART WELD AMPS
MMA PULSE
STD
PULSE FREQUENCY
WIDTH
f
CHOICE PARAMETER
ADJUST
21 3 DC
BALANCE % AC FREQUENCY
abTIG Midi 203P AC/DC
Wireless RemoteTechnology
Built in
240V
Single Phase
AC
Welding Processes GTAW (TIG)
Power Supply (Voltage) 1-Phase 198-264V
Frequency Hertz 50/60 Hz
Rated Input Power (kW) 6.1kW (TIG), 8.5kW (MMA)
Power Factor 0.7
Amperage Range 10 - 200 Amps
Duty Cycles on AC-TIG @ 40OC200 Amps @ 35%, 153 Amps @ 60%, 118 Amps @ 100%
Max Open Circuit Voltage 52V
Weight & Dimensions (LxWxH) 7Kg & 460mm x 150mm x 280mm
The FabTIG Mini 200P AC/DC is an inverter welding machine designed for TIG (GTAW) welding Aluminium, Stainless and Carbon Steels and also STICK (MMAW) welding of a wide range of ferrous metals. The machine features a basic easy-to-use design that allows both tradespeople and serious hobbyists to weld all sorts of exotic metals in the workshop, on-site or at home. The FabTIG Mini 200P is powerful with a strong 35% duty cycle for serious all day TIG & MMA welding yet light enough to carry around work sites and climb up stairs and ladders.
Mini in size with powerful output:• Designed for Tungsten Inert Gas (TIG) welding in AC-HF or DC-HF and DC
Lift-Arc modes. Also well suited to STICK Welding (MMAW) of a wide range of ferrous metals
• Perfect for TIG welding of Aluminium & Alloys, Stainless & Chrome-Nickel Steels plus Carbon & Low-alloy Steels
• Powerful 200A welding; can run 4.0mm Tungsten electrodes and successfully weld 6mm to 8mm Aluminium
• TIG duty cycle = 35% @ 200A for serious all day on-site welding• Simple to use electronic controls for accurate & easy adjustment of the
welding parameters• Control Panel English symbols and abbreviations; SC = Start Current, US = Up Slope, PC = Peak Current, BC = Base Current, DC = Down Slope, EC = End Current
MMA LIFT HF AC DC 2T 4T
S
%
Hz
CHOICE PARAMETER
FREQUENCY BALANCE
WIDTH
A V
ADJUST
MMA
%
PULSE
STDSC
USPC
Pre
BC DS
EC
Post
HOTSTART
WELDAMPS
ARCFORCE
abTIG Mini 200P AC/DC
Carry Bag included
Approximately 2 Coke cans
high
240 Volt
15A
W
AR R A N
TY2
YEARW
AR R A N
TY
The FabTIG Midi 203P AC/DC is a professional series inverter welding machine designed for High Frequency and Lift-Arc TIG (GTAW) welding plus STICK Electrode (MMAW) arc welding of a wide range of metals. Aluminium, Aluminium-Alloys, Brass, Bronzes, Stainless Steels, Nickel Alloys, Low-Alloy and regular Carbon Steels are all easily weldable with the FabTIG Midi. The machine features an advanced but easy-to-use design that helps turn you into the TIG expert. You can put your FabTIG Midi to work in many ways including; welding and repair work on; fuel tanks, bull-bars, boats, ships, balustrading, pipe work, food grade preparation equipment and furniture, architectural hand railings, pressure vessels and motor racing vehicles etc.
Mid-sized professional AC/DC TIG welder:• 9 Memory Control Settings as standard• Designed for Tungsten Inert Gas (TIG)
welding in AC-HF or DC-HF and DC Lift-Arc modes. Also well suited to STICK Welding (MMAW) of a wide range of ferrous metals
• Multiple AC-Waves, 1) Square Wave, 2) Sine Wave and 3) Triangular Wave
• For immaculate TIG welding of Aluminium & Alloys, Stainless & Chrome-Nickel Steels plus Carbon & Low-alloy Steels
• Powerful 200A welding; can run 4.0mm Tungsten electrodes and successfully weld 6mm to 8mm Aluminium
• TIG duty cycle = 40% @ 200A for serious all day welding
• Simple to use electronic controls for accurate & easy adjustment of the welding parameters
• AC Frequency adjustment and control 50-250Hz• 240V single phase supply
240 Volt
15A
W
AR R A N
TY2
YEARW
AR R A N
TY
Welding Processes GTAW (TIG)
Power Supply (Voltage) 1-Phase 198-264V
Frequency Hertz 50/60 Hz
Rated Input Power (kW) 5.6kW (TIG), 8.8kW (MMA)
Power Factor 0.7
Amperage Range 10 - 200 Amps
Duty Cycles on AC-TIG @ 40OC200 Amps @ 40%, 163 Amps @ 60%, 126 Amps @ 100%
Max Open Circuit Voltage 66V
Weight & Dimensions (LxWxH) 12.5Kg & 550mm x 190mm x 355mm
Wireless RemoteTechnology
Built in
CORDLESS Remote and Foot Pedal available as optional extras
S/C: 10477S/C: 53590
For Maximum OutputFor Maximum Output
FabGear quality products are especially designed for the Metal Fabrication, Welding, Sheetmetal and Engineering trades.
®abTIG TCK01 TIG Consumables Kit
All the right stuff in all the right places
P/C FG.TCK01
S/C 52607
Even if you are starting out in TIG welding or you’ve being TIG welding for a while, the TIG Consumables Kit is a handy little TIG Tool Kit that keeps all the Collets, Collet Bodies, Back Caps, Insulators, Nozzles and Tungsten’s in one easy to find location. It allows the user to tackle most TIG welding applications with professional ease.
The TCK01 TIG Tool Kit also offers plenty of room to add more spare parts and consumables such as, spare Torch-heads, TIG Pen, TIG-Gloves and other spare gear, etc.
Features:• The TIG Consumables Kit is supplied in a sturdy
little plastic toolbox that features two fold out parts trays with laser-cut, high density foam inlays to hold the parts supplied
• The laser-cut, high density foam inlays make your job easy. The parts all have a home and it’s easy to see what’s missing or being used
• Suits 17, 18 and 26 model LINDE* Style TIG Torch heads.
• The kit is supplied with a standard consumables set (collet, collet-body and gas nozzles) plus two sized sets of gas lenses (1.6mm and 2.4mm) for improved gas shielding when welding reactive metals such as stainless steel, high carbon and low-alloy steel and titanium alloys
Why use Gas Lenses:Gas lenses provide more shielding gas coverage and exclude the air from the weld zone. If you’re getting black, dull coloured welds on stainless steel, low alloy steels or other reactive metals, then use a gas lens.
* The trade names listed are for reference, identification and customer convenience only and remain the intellectual property of the respective trade mark/name owners.
TIG
ab ab
w w w. f a b g e a r . c o m . a uGear
Gear
®
11
®®
®abTIG Maxi 320P AC/DC Pulse TIG Welder
P/C FG320PmTIG
S/C 12320
CHOICE PARAMETER
abTIG Maxi 320P AC/DC
2T
4T
WIDTH
PULSE FREQUENCYf
AC FREQUENCYBALANCE
%
SC
US
PC
Pre
BC
DS
EC
Post
PULSE
STD
S
%
Hz
MMA
MEMORYH20 ALARM
SINE
SQUARE
TRI
DC
HF TIG
LIFT TIG
MMA
POWER
ALARM
GAS
H20
WELD AMPS
HOT START
ARC FORCE
AMPS
M
415V
Three Phase
AC
The FabTIG Maxi 320P AC/DC is a 415V three phase, high duty cycle Tungsten Inert Gas (TIG) welder. Employing AC-HF or DC-HF and DC Lift-Arc modes this machine is well suited to welding a wide range of ferrous (magnetic) and non-ferrous metals. This machine can be used for professional level TIG welding of Aluminium & Alloys, Stainless & Chrome-Nickel Steels plus Carbon & Low-alloy Steels. The FabTIG Maxi features a powerful 320Amps of welding power at an impressive 60% duty cycle for serious all day production welding.
A Compact industrial series AC/DC TIG:• 9 Memory Control Settings as standard• Powerful 320A welding; can run the largest
Tungsten electrodes and successfully weld 10mm to 15mm Aluminium
• Digital display with a logical easy-to-use control panel
• AC-High Frequency mode for TIG welding Aluminium and Aluminium-Alloys
• Multiple AC-Waves, 1) Square Wave, 2) Sine Wave and 3) Triangular Wave• DC-HF or DC-LIFT modes for TIG welding Stainless and Carbon Steels• AC and DC+/- modes for STICK welding with MMAW electrodes including
Hot-Start and Arc-Force controls• Pulse TIG mode for control of penetration
and weld shape• Pulse TIG Width and Frequency
adjustments• 2T and 4T TIG Torch trigger modes• Balance adjustment for penetration/cleaning
control and Tungsten shape control• AC Frequency adjustment and control 50-250Hz• Pre and Post Gas Flow adjustment
W
AR R A N
TY
W
AR R A N
TY
3YEAR
Welding Processes GTAW (TIG) and MMA (Stick)
Power Supply (Voltage) 3-Phase 374-457 Volts
Frequency Hertz 50/60 Hz
Rated Input Power (kW) 11.4kW (TIG) 16.5 (MMA)
Power Factor 0.75
Amperage Range 10 – 320 Amps
Duty Cycles on AC-TIG @ 40OC320Amps @ 60%, 277Amps @ 80%, 248Amps @ 100%
Max Open Circuit Voltage 65V
Weight & Dimensions (LxWxH) 25.5Kg & 550mm x 240mm x 445mm
CORDLESS Remote and Foot Pedal available as optional extras
S/C: 10477S/C: 53590
FabGear quality products are especially designed for the Metal Fabrication, Welding, Sheetmetal and Engineering trades.
COMING SOON
MultiLINER - One liner to fit them all
• If you need a MIG Gun liner and are not too sure what brand MIG Gun you have, then Multiliner is the solution - one liner to fit them all©
• Stock one liner and multiple collets to suit the individual MIG Gun brand you are using.
• Reduce your inventory, great for workshops where multiple brands of MIG Guns are used.
• Stock one liner and the correct MultiLINER Collet and liner stocks can be reduced by 66% on average, when three different brands of MIG Guns are used in the one work-place.
Description:The MultiLINER concept has been designed to reduce the complexity and amount of stock quantities held for different brand MIG gun liners.
Some workshops have three, sometimes four different brand MIG Guns on different brand MIG Welders, keeping track of all the spare parts for the MIG guns becomes a big task.
MultiLINER helps eliminate stock-outs and over stocks of the wrong liners plus brings peace of mind to welding and fabrication operations that rely on MIG Welding.
0.6 - 0.9mm Solid & Cored Wires
0.9 - 1.2mm Solid & Cored Wires
1.2 - 1.6mm Solid & Cored Wires
0.9 - 1.2mm Aluminium
MultiLINER - Triple Collet Packs
These liners are supplied with the three most popular MIG gun liner collets on the Australian market; Binzel, Tweco and Bernard Styles. This kit provides peace of mind to most users of common MIG Guns, so you don’t get caught out ordering in the wrong brand liner.
BERNARDSTYLE
BINZELSTYLE
TWECOSTYLE
Product Code Short Code Description
MLKS50609 52796 0.6 - 0.9mm - 5.1m - Blue
MLKS50912 52797 0.9 - 1.2mm - 5.1m - Red
MLKS51216 52798 1.2 - 1.6mm - 5.1m - Yellow
MLKA40912 52800 0.9 - 1.2mm - 4.5m - Grey
MLKA60912 52801 0.9 - 1.2mm - 6.5m - Grey
MLKA80912 52802 0.9 - 1.2mm - 8.5m - Grey
MLKS - Steel, Solid and Cored Wires
MLKA - Polycarbon for Aluminium and Soft Wires
MultiLINER - Singles and Collets
The trade names listed are for reference, identification and customer convenience only and remain the intellectual property of the respective trade mark/name owners.
TREGASKISS STYLE
P/C MLC.TRG S/C 52820TWECO STYLE
P/C MLC.TWC S/C 52821
BERNARD STYLE
P/C MLC.BND S/C 52814BINZEL STYLE
P/C MLC.BZL S/C 52815
ESAB STYLE
P/C MLC.ESB S/C 52816KEMPPI STYLE
P/C MLC.KMP S/C 52817
OTC STYLE
P/C MLC.OTC S/C 52818PANASONIC STYLE
P/C MLC.PNA S/C 52819
With the choice of the correct style Liner Collet. Choose your Collet from the eight (8) most popular style MIG Gun brands on the market. Add this to the correct wire sized liner and simply screw on the collet to make up your new liner.
Collets are available from the eight (8) most popular style MIG Gun brands on the market.
Product Code Short Code Description
MLS50609 52805 0.6 - 0.9mm - 5.1m - Blue
MLS50912 52806 0.9 - 1.2mm - 5.1m - Red
MLS51216 52807 1.2 - 1.6mm - 5.1m - Yellow
MLA40912 52809 0.9 - 1.2mm - 4.5m - Grey
MLA60912 52810 0.9 - 1.2mm - 6.5m - Grey
MLA80912 52811 0.9 - 1.2mm - 8.5m - Grey
MultiLINER©©
ab ab
w w w. f a b g e a r . c o m . a uGear
Gear
®
12 FabGear quality products are especially designed for the Metal Fabrication, Welding, Sheetmetal and Engineering trades.
ab ab
w w w. f a b g e a r . c o m . a uGear
Gear
®
13
125mm x 1.0mm Thins
Main Features: The FabCUT Thin disc produces a small cutting width of just over 1mm wide and ensures heat input is drastically reduced to the cutting area which minimizes distortion, particularly in thin sheet metals.
Contains no iron and is suitable for use on stainless steel, carbon steel and all alloys.
The specially designed abrasive compounds cut faster and last longer than most other comparable competitive discs – we compare the best in a special purpose test rig that takes out the “human-factor” in the testing.
• Quality, long lasting, fast cutting disc, suitable for Stainless Steels and Carbon Steels.
• Supplied standard with metal reinforcing ring.
Standards: Manufactured to and complies with AS1788.1-1987 and EN12413
P/C FGCDT125i
S/C 51499
125mm Zirc-Inox Flap Disc
Main Features: The FabFLAP discs use European made zirconium abrasive cloth and the strips are W:20mm x L:30mm and on a 40G Disc contain 75 flaps, compared to some “standard 40G discs” who measure up at only W:15mm x L:24mm x 65 Flaps.
These discs are thick and durable, and the zirconium grit breaks down readily and stays sharp ensuring quality cutting all the way through to the end of the disc.
• Quality, long lasting, zirconia oxide grit, suitable for Stainless Steels and Carbon Steels.
• Thick large flaps ensure excellent stock removal.
Standards: Manufactured to and complies with AS1788.1-1987 and EN13743
40G - P/C FGFD125z40 S/C 5196860G - P/C FGFD125z60 S/C 5196980G - P/C FGFD125z80 S/C 51970
125mm x 6mm Dual Layer
Main Features: FabGRIND Wheels have been designed with the latest Dual Layer (DL) Technology.
These wheels can be used in exacting applications where the operator needs to remove vast amounts of stock quickly (the harder you push the harder it grinds) and then conversely be able to finish off the job, almost to the level of a Flap-Disc, by simply taking the pressure off and it almost becomes the equivalent of a file.
• NEW - Dual Layer Technology• The harder you push the harder it grinds, take the
pressure off and it almost becomes a file.
Standards: Manufactured to and complies with AS1788.1-1987 and EN12413
P/C FGGW125DL
S/C 51508
©abDISC©
FabGear quality products are especially designed for the Metal Fabrication, Welding, Sheetmetal and Engineering trades.
MS SS
abWIRE MS756 Mild Steel MIG Wire
AWS A5.18: ER70S-6
• PLW = Precision Layer Wound wire for improved feeding
• Drawn to tight diameters for consistent and reliable feedability
• Manufactured with precise alloy chemistries
• Suitable for Gas Metal Arc Welding (GMAW) also known as Metal Inert Gas (MIG) Welding
Classifications:AS/NZS ISO: 14341: BG 49A 3U C1/M21 S6AWS A5.18: ER70S-6
Product Code Short Code Description
MW.MS756.250.09 51543 0.9mm x 250kg
MW.MS756.250.10 51544 1.0mm x 250kg
MW.MS756.250.12 51545 1.2mm x 250kg
MW.MS756.15.06 51527 0.6mm x 15kg
MW.MS756.15.08 51528 0.8mm x 15kg
MW.MS756.15.09 51529 0.9mm x 15kg
MW.MS756.15.10 51530 1.0mm x 15kg
MW.MS756.15.12 51531 1.2mm x 15kg
MW.MS756.05.06 51532 0.6mm x 5kg
MW.MS756.05.08 51533 0.8mm x 5kg
MW.MS756.05.09 51534 0.9mm x 5kg
MW.MS756.05.10 51535 1.0mm x 5kg
ab ab
w w w. f a b g e a r . c o m . a uGear
Gear
®
14
©©
abWIRE SS316LSi Stainless Steel MIG Wire
AWS A5.9: ER316LSi
FabWIRE SS316LSi is designed for welding low carbon stainless steels with molybdenum, such as acid resisting 316L austenitic stainless steels and other grades of similar composition, including 304L type and grades containing Nb or Ti.• The main uses include welding and surfacing applications to matching and
similar non-stabilized – austenitic CrNi(N) and CrNiMo(N) steels and cast steel grades such as; 301, 302, 304/304L, 316/316L, 318, 321, 347, 410, 430, and 444 stainless steels.
• The perfect MIG/GMAW filler wire for welding 18% Cr + 8%Ni + 3%Mo (known as 18/8) type Stainless Steels.
Classifications:AS/NZS ISO 14343-B: SS316LSiEN/ISO 14343-A: G 19 12 3L SiAWS A5.9: ER316LSi
Product Code Short Code Description
MW.SS316L.13.08 53563 0.8mm x 12.5kg
MW.SS316L.13.09 53564 0.9mm x 12.5kg
MW.SS316L.13.10 53565 1.0mm x 12.5kg
MW.SS316L.13.12 53566 1.2mm x 12.5kg
MW.SS316L.05.08 53561 0.8mm x 5kg
MW.SS316L.05.09 53562 0.9mm x 5kg
For welding of mild and low alloy steels in all positions.
abWIRE MS756
Classifications & Quality Approvals:AWS A5.18: ER70S-6AS/NZS ISO: 14341: BG 49A 3U C1/M21 S6 Approvals: ABS, DB, CE, GL, LR and TUVISO9001: 2000 – Quality Approved Process by Bureau Veritas
Batch No:
Spool Size:300mm
Net Weight:15Kg
P/C
: MW
.MS7
56.1
5.06
0.6mm
S/C: 51527
934
6277
0252
94
MIG/GMAW wire for welding 300 and 400 Series stainless steels such as 301, 302, 304/304L, 316/316L, 318, 321, 347, 410 and 430 grades.
Classifications & Quality Approvals:AWS A5.9: ER316LSiAS/NZS ISO 14343-A: G 19 12 3 L SiAS/NZS ISO 14343-B: SS316LSiApprovals: CE and DBISO9001: 2000 – Quality Approved Process by Bureau Veritas
Batch No:
Spool Size:300mm
Net Weight:12.5Kg
P/C
: MW
.SS3
16L.
13.0
8
0.8mm
S/C: 53563abWIRE SS316LSi
934
6277
0043
81
abROD SS316L Stainless Steel TIG Rod
AWS A5.9: ER316L
• TIG/GTAW & Oxy Welding rod for welding 300 and 400 Series stainless steels such as 301, 302, 304/304L, 316/316L, 318, 321, 347, 410 and 430 grades.
• The perfect MIG/GMAW filler wire for welding 18% Cr + 8%Ni + 3%Mo (known as 18/8) type Stainless Steels.
Classifications:AS/NZS ISO 14343-B: SS316LEN ISO 14343-W 19 12 3LAWS A5.9: ER316L
Product Code Short Code Description
TR.SS316L.05.12 53285 1.2mm x 5kg
TR.SS316L.05.16 53286 1.6mm x 5kg
TR.SS316L.05.24 53287 2.4mm x 5kg
TR.SS316L.01.12 53280 1.2mm x 1kg
TR.SS316L.01.16 53281 1.6mm x 1kg
TR.SS316L.01.24 53282 2.4mm x 1kgP/C: TR.SS316L.05.12
S/C: 53285abROD SS316L
9 346277 004794
1.2mm5kg
TIG/GTAW & Oxy Welding rod for welding300 and 400 Series stainless steels such as 301,
302, 304/304L, 316/316L, 318, 321, 347, 410and 430 grades.
Size:
Weight:
Classifications: AWS A5.9: ER316L AS/NZS ISO 14343-W 19 12 3 L AS/NZS ISO 14343-B: SS316LApprovals: DB, CE and TUVBatch No:
abROD MS752 & MS756 Mild Steel TIG Rod
• MS752 is a mild steel filler rod suitable for oxy-acetylene and TIG welding of carbon steel and wrought iron. It is triple deoxidised for superior weld deposit quality and resistance to porosity.
• MS756 is a general purpose mild steel filler rod suitable for oxy-acetylene and TIG welding of carbon steel and wrought iron, it is double oxidised suitable for high integrity TIG welding or Mild and Medium Tensile steels.
P/C: TR.MS752.01.16
S/C: 53320abROD MS752
1.6mm1kg
Mild steel filler rod suitable for oxy-acetyleneand TIG welding of carbon steel and
wrought iron. Triple deoxidised for superiorweld deposit quality and resistance to porosity.
Size:
Weight:
Classifications: AWS A5.18: ER70S-2AS: 1167.2: R6Approvals: ABS, DB, CE, GL, LR and TUVBatch No:
9 346277 024990
abROD©
Classifications:MS752 - AWS A5.18: ER70S-2 AS: 1167.2: R6MS756 - AWS A5.18: ER70S-6 AS: 1167.2: R6
ER70
S-2
ER70
S-6
Product Code Short Code Description
TR.MS752.05.16 53324 1.6mm x 5kg
TR.MS752.05.24 53325 2.4mm x 5kg
TR.MS752.01.16 53320 1.6mm x 1kg
TR.MS752.01.24 53321 2.4mm x 1kg
TR.MS756.05.16 53336 1.6mm x 5kg
TR.MS756.05.24 53337 2.4mm x 5kg
TR.MS756.01.16 53333 1.6mm x 1kg
TR.MS756.01.24 53334 2.4mm x 1kg
5kg
1kg
5kg
1kg
FabGear quality products are especially designed for the Metal Fabrication, Welding, Sheetmetal and Engineering trades.
abROD AL5356 Aluminium TIG Rod
AWS A5.10: ER5356
Product Code Short Code Description
TR.AL5356.18.16 53310 1.6mm x 1.8kg
TR.AL5356.18.24 53311 2.4mm x 1.8kg
TR.AL5356.18.32 53312 3.2mm x 1.8kg
TR.AL5356.01.16 53307 1.6mm x 1kg
TR.AL5356.01.24 53308 2.4mm x 1kg
TR.AL5356.01.32 53309 3.2mm x 1kg
abWIRE AL5356 Aluminium MIG Wire
AWS A5.10: ER5356
FabWIRE AL5356 is an Aluminium-5% Magnesium solid MIG wire for welding similar grade 500/5000 series and selected other grade aluminium and aluminium alloys to themselves and other lower strength aluminium materials.• Double Diamond Shaved outer diameter for tight dimensional consistency
for reliable feedability• PLW = Precision Layer Wound wire for improved feeding, every layer on the
spool is the same, layer after layer, so reducing the possibility of tangles and poor feedability
• Suitable for Gas Metal Arc Welding (GMAW) and Metal Inert Gas (MIG) welding
Classifications:AS/NZS ISO: 18273:2006 – S AL5356 (ALMg5Cr)AWS A5.10: ER5356
Product Code Short Code Description
MW.AL5356.02.09 52330 0.9mm x 2kg
MW.AL5356.02.10 52331 1.0mm x 2kg
MW.AL5356.06.09 52332 0.9mm x 6kg
MW.AL5356.06.10 52333 1.0mm x 6kg
MW.AL5356.06.12 52334 1.2mm x 6kg
MW.AL5356.06.16 52335 1.6mm x 6kg
General Purpose Aluminium wire containing 5% Magnesium, giving excellent corrosion resistance and high strength.
abWIRE AL5356
Classifications & Quality Approvals:AWS A5.10: ER5356AS/NZS ISO: 18273:2006 – S AL5356 (ALMg5Cr)Approvals: CE and DBISO9001: 2000 – Quality Approved Process by Bureau Veritas
Batch No:
Spool Size:300mm
Net Weight:6Kg
P/C
: MW
.AL5
356.
06.1
0
AL 1.0mm
S/C: 52333
934
6277
0044
80
ab ab
w w w. f a b g e a r . c o m . a uGear
Gear
®
15
abSAFE©©
P/C: TR.AL5356.01.16
S/C: 53307abROD AL5356
1.6mm1kg
Classifications: AWS A5.10: ER5356 AS/NZS ISO: 18273:2006 – S AL5356 (ALMg5Cr)Approvals: DB, CE and TUVBatch No:
TIG/GTAW & Oxy Welding GP Aluminium rod containing 5% Magnesium, giving
excellent corrosion resistance and high strength.
Size:
Weight:
9 346277 005753
abROD©
abPROTEC Leather Welding Blanket
P/C FGPRO.WB
S/C 51631
• Heavy Duty split leather construction for durability
• 100% Kevlar Stitching for resistance to heat, cuts and abrasion
• Continuous working temperature of 80˚C
• Packaged in a reusable bag
Size:• 1.8 x 1.8m
Applications:• Ideally suited for protecting
sensitive items such as glass windows, timber, cardboard, plastic materials and paint work on car panels etc, from welding and grinding sparks and other thermal generated heat sources.
FabPROTECLeather Welding Blanket
P/C: FGPRO.WBS/C: 51631
©
abGear G
abFLASH Welding Curtains and Frame
• Translucent, standards approved polyvinyl curtain• Designed to protect other workers from the welding arc• Reduces light transfer to other work areas• Curtain available in green or red
Product Code Short Code Description
SP.F1818 11652 Frame Kit - 1.8 x 1.2/1.8 x 1.8
SP.C1818G 13207 Green - 1.8 x 1.8m
SP.C1818R 14710 Red - 1.8 x 1.8m
• FabROD AL5356 is an Aluminium-5% Magnesium solid TIG rod for welding similar grade 500/5000 series and selected other grade aluminium and aluminium alloys to themselves and other lower strength aluminium materials.
Classifications:AS/NZS ISO: 18273:2006 – S AL5356 (ALMg5Cr)AWS A5.10: ER5356
1.8kg
1kg
FabGear quality products are especially designed for the Metal Fabrication, Welding, Sheetmetal and Engineering trades.
©abGLOVE Venus Leather Welding Gloves
P/C FGVEN.GWL S/C 53463
©abGLOVE Neptune Leather Welding Gloves
©abGLOVE Mars Leather Welding Gloves
P/C FGMAR.GWL S/C 53465
ab ab
w w w. f a b g e a r . c o m . a uGear
Gear
®
16
abGLOVE©©
P/C FGNEP.GWL S/C 53464
The Venus welding gloves are a DELUXE level hand protector that have been designed to take the all-day punishment that welders and fabricators dish out whilst welding on the big jobs. If you’re serious about your welding and tough is what you’re after then the FabGLOVE Venus Welding Gloves are the ones to grab.
Length: 410mm long
Suitable Welding Processes:• Gas Metal Arc Welding (GMAW) aka MIG• Manual Metal Arc Welding (MMAW) aka STICK
Construction: • Made from deluxe AB-Grade cowhide side leather• Double skinned palm reinforcement is double
line stitched with Kevlar® sewing thread for added heat protection when handling hot components
• Reinforced thumb and knuckle guards for added radiated heat protection when working up close to the welding arc
Standards: Manufactured to and complies with EN388/EN12477 and meets the requirements of the European Conformity regulations.
©abGLOVE Saturn Leather Welding Gloves
P/C FGSAT.GWL S/C 53467
The Saturn welding gloves offer a STANDARD level of hand protection at a value rate and are designed along traditional welding gloves styles for people who weld. The FabGLOVE Saturn Welding Gloves provide sufficient protection against heat generated by the welding arc, the ultra-violet and infra-red rays plus all the spatter and sparks encountered whilst welding.
Length: 410mm long
Suitable Welding Processes:• Gas Metal Arc Welding (GMAW) aka MIG• Manual Metal Arc Welding (MMAW) aka STICK
Construction: • Made from standard cowhide split shoulder leather• Seamless index finger for added comfort• Reinforced thumb and knuckle guards
for added radiated heat protection when working up close to the welding arc
• FabRIC-Cool inner lining for superior comfort• Great value, long wearing gloves for people who weld!
Standards: Manufactured to and complies with EN388/EN12477 and meets the requirements of the European Conformity regulations.
The Neptune welding gloves are a PREMIUM level hand protector that have been designed with EXTRA heat resistant padding “HeatFOAM” for the professional welder. When premium comfort whilst welding is the prime concern then the FabGLOVE Neptune Welding Gloves are the ones to specify.
Length: 410mm long
Suitable Welding Processes:• Gas Metal Arc Welding (GMAW) aka MIG• Manual Metal Arc Welding (MMAW) aka STICK
Construction: • Made from premium A-Grade pig skin leather for the hand area and
premium grey leather for the arm-end of the glove• Elastic mid cuff “triangular stitched” at the wrist area with Kevlar® thread to
provide a secure fit onto the hands• HeatFOAM heat-resistant hand lining for
the ultimate in comfort, radiated heat protection and moisture absorption
Standards: Manufactured to and complies with EN388/EN12477 and meets the requirements of the European Conformity regulations.
The Mars welding gloves offer SUPERIOR level hand protection at a reasonable price level, without sacrificing the overall glove quality level. FabGLOVE Mars Welding Gloves stand up to the tough conditions that welders, fabricators, fitters and tradespeople face on the job, be it on-site or in the workshop.
Length: 410mm long
Suitable Welding Processes:• Gas Metal Arc Welding (GMAW) aka MIG• Manual Metal Arc Welding (MMAW) aka STICK
Construction: • Made from superior AB-Grade cowhide shoulder leather• Double skinned palm reinforcement is double line stitched with Kevlar®
sewing thread for added heat protection when handling hot components
• Reinforced thumb and knuckle guards for added radiated heat protection when working up close to the welding arc
• FabRIC-Cool inner lining for superior comfort
Standards: Manufactured to and complies with EN388/EN12477 and meets the requirements of the European Conformity regulations.
Welting FeatureFully welted construction. A thin piece of leather
is sewn into the seam towards the outside of the glove to protect the seams from abrasion
and sparks so reducing burn-through.
FabGear quality products are especially designed for the Metal Fabrication, Welding, Sheetmetal and Engineering trades.
©abGLOVE 5-Star General Riggers Gloves
M - P/C FG5SG.RL09 S/C 51625
L - P/C FG5SG.RL10 S/C 51626
XL - P/C FG5SG.RL11 S/C 51627
• General purpose utility work glove• ‘A’ grade beige premium cow leather• Wing thumb for stitch-free palm• Double stitched for strength, elastic back• Colour-coded cuff for size identification
Recommended and Industry Uses:• Truck and Transport Industries• Farm and Agricultural applications• Mining and Construction Industries• Building Industry• Civil Construction• Timber and Forestry• Oil Rigs and Oil Fields
Standards: Manufactured to EN388 standard
©abGLOVE Gemini GoatSkin TIG Welding Gloves
P/C FGGEM.GWT S/C 53468
ab ab
w w w. f a b g e a r . c o m . a uGear
Gear
®
17
abGLOVE©©
©abGLOVE Jupiter Goat & CowSkin TIG Welding Gloves
P/C FGJUP.GWT S/C 53471
©abGLOVE Mercury Leather Welding Gloves
P/C FGMER.GWL S/C 53462
The Mercury welding gloves are the ULTIMATE level in hand protection, they have been designed with the professional welder in mind. When ultimate comfort and arc protection is the prime concern then the FabGLOVE Mercury Welding Gloves are the ones to use.
Length: 380mm long
Suitable Welding Processes:• Gas Metal Arc Welding (GMAW) aka MIG• Manual Metal Arc Welding (MMAW) aka STICK
Construction: • Made from ultimate A-Grade cowhide buttocks leather• Double skinned palm reinforcement is cross stitched with Kevlar®
sewing thread for added heat protection when handling hot components
• Elastic rear cuff “wave stitched” at the ¾ length mark with Kevlar thread to provide a secure fit and reduce the chances of any spatter ingress onto the hands
Standards: Manufactured to and complies with EN388/EN12477 and meets the requirements of the European Conformity regulations.
The Jupiter welding gloves offer the ULTIMATE level of hand protection in TIG welding and have been designed with the professional in mind. The FabGLOVE Jupiter TIG Welding Gloves deliver the ultimate feel of the TIG Rod and they provide exceptional comfort and style. The white goat-skin leather on the hand top reflects the arc rays away from the hand, helping to keep the operator’s hand cooler. With a padded palm support these gloves are awesome to wear and use – as they should be for welding experts.
Length: 320mm long
Suitable Welding Processes:• Gas Tungsten Arc Welding (GTAW) aka TIG• Gas Metal Arc Welding (GMAW) aka MIG – light duty• Manual Metal Arc Welding (MMAW) aka STICK – light duty
Construction: • Seamless index finger for added
comfort• Wing thumb construction
Standards:Manufactured to and complies with EN388/EN12477 and meets the requirements of the European Conformity regulations.
The Gemini welding gloves offer a SUPERIOR level of hand protection and have been designed for general and specialised TIG welding. The FabGLOVE Gemini TIG Welding Gloves deliver a superior feel of the TIG Rod compared to standard “hard leather” gloves. They provide super comfort and protection for light duty welding operations.
Length: 330mm long
Suitable Welding Processes:• Gas Tungsten Arc Welding (GTAW) aka TIG• Gas Metal Arc Welding (GMAW) aka MIG – light duty• Manual Metal Arc Welding (MMAW) aka STICK – light
duty
Construction: • Made from superior A-Grade Goat-
skin leather on the palm with a cowhide gauntlet leather cuff and top
• Seamless index finger for added comfort• Wing thumb construction
Standards:Manufactured to and complies with EN388/EN12477 and meets the requirements of the European Conformity regulations.
FabGear quality products are especially designed for the Metal Fabrication, Welding, Sheetmetal and Engineering trades.
®
FabGear quality products are especially designed for the Metal Fabrication, Welding, Sheetmetal and Engineering trades.ab ab
w w w. f a b g e a r . c o m . a uGear
Gear
®
18
®
®abSHIELD MAGNESIUM Welding Helmets
®abSHIELD VANADIUMWelding Helmets
The important stuff:• Variable Shade, Dual Range 5-8 and 9-13 Auto Darkening Filter (ADF)
with Grinding Mode• Fully automatic on/off power.• Modern and compact external controls so you don’t have to take off the
helmet when adjusting• Graphic wrapped for maximum attention• Low weight for comfortable all-day welding = 520g• 2-Year Warranty on ADF
Package Contents:• FabSHIELD Magnesium Graphic Helmet shell• FabGear ADF Lens FG10050M1• FG1000 Head harness• One spare inside and two outside cover lenses• Instruction and Operation Manual
Standards Compliance AS/NZS:1338.1
EN379 Quality Rating 1/1/1/2
Welding Process Suitability MIG, STICK & TIG
Suitable for TIG Low Amp 10A
Suitable for PLASMA (PAC) Yes
Grinding Mode Yes
No of Sensors 4
Welding Shade Range/Level 5-8 / 9-13
Light Shade 4
Switching Speed 1/25,000 sec
Viewing Area LxH 100 x 50mm
Viewing Area 5,000mm2
Viewing Area Square Root 70.71mm
Safe Operating Service Temperature -5oC to +55oC
Weight 520g
Standards Compliance AS/NZS:1338.1
EN379 Quality Rating 1/1/1/2
Welding Process Suitability MIG, STICK & TIG
Suitable for TIG Low Amp 5A
Suitable for PLASMA (PAC) Yes
Grinding Mode Yes
No of Sensors 4
Welding Shade Range/Level 5-8 / 9-13
Light Shade 4
Switching Speed 1/25,000 sec
Viewing Area LxH 98 x 88mm
Viewing Area 8,624mm2
Viewing Area Square Root 92.87mm
Safe Operating Service Temperature -5oC to +55oC
Weight 595g
Magnesium-1 Vanadium-2Vanadium-1Magnesium-2
Vanadium-1 Red Flames - P/C FGVANAD1.AWH S/C 52542
Vanadium-2 Devil 666 - P/C FGVANAD2.AWH S/C 52543
Magnesium-1 Silver-Line - P/C FGMAGNE1.AWH S/C 52538
Magnesium-2 Arcinator - P/C FGMAGNE2.AWH S/C 52539
PLASMASTICK MIG TIG PLASMASTICK MIG TIG
FabGear FG10050M1 ADF Lens
View from inside
View from inside
FabGear FG9888V1 ADF Lens
The important stuff:• Variable Shade, Dual Range 5-8 and 9-13 Auto Darkening Filter (ADF)
with Grinding Mode• Fully automatic on/off power• Extra Large Viewing area = 98 x 88mm = 8,624mm2• Excellent on TIG down to 5 Amps• Graphic wrapped for maximum attention• Low weight for comfortable all-day welding = 595g• 2-Year Warranty on ADF
Package Contents:• FabSHIELD Vanadium Graphic Helmet shell• FabGear ADF Lens FG9888V1• FG1000 Head harness• Two spare inside and three outside cover lenses• Instruction and Operation Manual
abGLOVE©
abSPEC iSpec Safety Specs
Clear - P/C FGiSC.SS S/C 51629
Smoke - P/C FGiSS.SS S/C 51630
Description:Sleek styling with an ultra-light weight wraparound lens shape which allows these specs to fit a wide variety of face shapes.
The lenses are specially treated with:• Hard-coat lense for anti-scratch • Anti-fog coatings• iSpec safety glasses offer 99.9% Ultra Violet (UV) protection
Standards: Manufactured and certified to Australian & New Zealand Standard AS/NZ 1337:1992.
Charcoal
abMASK P2-Valved Disposable Respirators
Standard - P/C FGP2V.MASK S/C 51566
Charcoal - P/C FGP2VC.MASK S/C 51567
Description:Pre-shaped, half-face, disposable respirators for Level-2 Particulates, valved for use with most dusts, mists and cellousic based organic fumes. The masks offer a pre-shaped nose cushion with a soft inner layer ensuring excellent fit to most facial shapes. The Exhalation Valve makes breathing easier and aids in comfort for the user. • No metal parts used in construction• Charcoal reduces smell and odours• Single use only
Standards: Manufactured and certified to Australian & New Zealand Standard AS/NZS 1716:2012, Licence No: SMKH20566.
Standard
abSAFE©
®abSHIELD CHROMIUM-1 Welding Helmet
P/C FGCHROM1.AWH S/C 52534
• Variable Shade, 9-13 Auto Darkening Filter (ADF) with Grinding Mode
• Fully automatic on/off power• Adjustable light sensitivity and delay time control• Two independent light sensors• Easy to use external controls so you don’t have
to take off the helmet when adjusting• Graphic wrapped for maximum attention• 2-Year Warranty on ADF
®abSHIELD FLIP Welding Helmet
P/C FGFLIP.AWH S/C 52532
Standards Compliance AS/NZS:1338.1
EN379 Quality Rating 1/1/1/2
Welding Process Suitability MIG, STICK & TIG
Suitable for TIG Low Amp 40A
Suitable for PLASMA (PAC) No
Grinding Mode Yes - Flip Up
No of Sensors 2
Welding Shade Range/Level Auto Shade 11
Light Shade 3
Switching Speed 1/5,000 sec
Viewing Area LxH 92 x 42mm
Viewing Area 3,864mm2
Viewing Area Square Root 62.16mm
Safe Operating Service Temperature -5oC to +55oC
Weight 495g
• Shade 11 Auto Darkening Filter (ADF) with a flip lid• Grinding is completed easily by flipping up the lid• Clear grinding lens• Two independent light sensors• Solid construction to take day-in-day-out
punishment• No frills, no big bills• Built in lithium-ion battery with solar assist
and back-up• 2-Year Warranty on ADF
Standards Compliance AS/NZS:1338.1
EN379 Quality Rating 1/2/1/2
Welding Process Suitability MIG, STICK & TIG
Suitable for TIG Low Amp 20A
Suitable for PLASMA (PAC) No
Grinding Mode Yes
No of Sensors 2
Welding Shade Range/Level 9-13
Light Shade 4
Switching Speed 1/15,000 sec
Viewing Area LxH 92 x 42mm
Viewing Area mm2 3,864
Viewing Area Square Root 62.16mm
Safe Operating Service Temperature -5oC to +55oC
Weight 485g
FabGear quality products are especially designed for the Metal Fabrication, Welding, Sheetmetal and Engineering trades. ab ab
w w w. f a b g e a r . c o m . a uGear
Gear
®
19
©
FabGear FG9242A1 ADF Lens
View from inside
FabGear FG9843C1 ADF Lens
View from inside
FabGear quality products are especially designed for the Metal Fabrication, Welding, Sheetmetal and Engineering trades.
FabricatorsGear
Victoria841 Mountain Highway
Bayswater 3153 Ph: 03 9720 0504
130 Herald Street Cheltenham 3192 Ph: 03 9555 1744
23 Commercial Drive Dandenong South 3175
Ph: 03 9706 6262
16 Dalton Street Geelong South 3220 Ph: 03 9720 0504
9A King Drive Horsham 3400
Ph: 03 5381 1282
95 Hume Highway Somerton 3062
Ph: 03 9308 8122
126 Fairbairn Road Sunshine West 3020
Ph: 03 9364 8311
212 Liddiard Street Traralgon 3844
Ph: 03 5176 1085
22 Kane Road Wodonga 3690
Ph: 02 6056 3055
South AustraliaAdelaide
13-15 Bellchambers RoadEdinburgh North 5113
Ph: 08 8252 7472
Lonsdale 29 Hales Drive Lonsdale 5160
Ph: 08 8326 3491
TasmaniaHobart
28 Crooked Billet Drive Bridgewater 7030 Ph: 03 6263 6422
Launceston 1 Gatty Street
Western Junction 7212 Ph: 03 6391 9342
Western AustraliaPerth
6 Dampier RoadWelshpool 6106
Ph: 08 6350 1077
Northern TerritoryDarwin
54 Dawson Street, East ArmBerrimah 0828
Ph: 08 8947 3130
Supagas Locations
FabGear products are available from:
The Story Behind FabGear
The FabGEAR brand has been developed over the years as an alternative to the expensive
well-known brands used by people working in metal.
When you purchase a FabGEAR product YOU are getting value for money, reliability and products that
perform.
The product developers at FabGEAR spend a lot of time with the USERS, people like yourself. We
spec-up our products based on what fabricators, welders and engineering trades people tell us
they need!
Our products are developed, by us, to take in the uniqueness of what we do and how we do it here in
Australia.
We are proud to offer a 2-Year Warranty on most of our machinery and goods range.
FabGear Short Catalogue v3_29062017
13 SUPA13 78 72
www.supagas.com.au*CONDITIONS APPLY
FREEDELIVERY*