Post on 24-Mar-2018
Ideal for:
Onshore Offshore Marine
FA150 Dedicated Man Rider® Air Winch150 kg (330 lb)
Slack wire detector automatically stops the winch from paying out in case of slack wire
Radial piston air motor provides reliable power with adjustable speed for any use
Lift-to-Shift variable speed lever provides precise control and built-in safety
Marine 812 finish paint standard for enhanced corrosion resistance
Drum guard standard to protect operator
Filter, regulator, lubricator air preparation package included to protect internal components
FA150 Dedicated Man Rider® Air Winch150 kg (330 lb)
Ingersoll Rand FA150 Man Rider® winches are specifically designed for safe and reliable personnel lifting. They feature a tough steel frame with protection for critical components and marine grade paint to stand up to harsh environments. Their rugged radial piston air motors provide reliable power under all conditions. FA150 Man Rider® winches include multiple fail-safe features to help keep your personnel safe. Designed to meet the latest regulations including CE, ATEX and DNV type approval, Ingersoll Rand FA150 Man Rider® winches work wherever you do. Built with our decades of experience, count on Ingersoll Rand’s time-proven design wherever you need to lift or lower people.
Bolt Pattern
DRUM
B
A
CB
254 [10.0]
305 [12.0]
483[19.0]
273[10.75]
579 [22.8]
40.2[1021]
720[28.3]
13 [.50]ø17 [.69]
356[14.0]
508 [20.0]51 [2.0]610 [24.0] 41
[1.6]
AIR INLET3/4” NPT
MOTOR EXHAUST 3/4” NPT
132 [5.2 ]
1129 [44.5]
LIMITSWITCH
Models Amm (in)
Bmm (in)
Cmm (in)
Total Number of Holes
FA150 508 (20.0) 229 (9.0) 18 (0.69) 6
Dimensions shown are mm. Dimensions in Brackets [ ] are inches. Dimensions are subject to change. Contact factory for certified drawings.
Emergency lowering system
Stainless steel hose package
General Performance. Performance based on a 10:1 design factor
Model
Line Pull Capacity Line Speed
First Layer kg (lb)
Mid Drumkg (lb)
Top Layer kg (lb)
First Layer m/min (fpm)
Mid Drumm/min (fpm)
Top Layer m/min (fpm)
FA150KGiMR 150 (330) 150 (330) 150 (330) 25 (82) 27 (89) 29 (95)
(1) Recommended minimum breaking force of wire rope based on top layer line pull rating.(2) Drum Capacity is based on tightly wound wire rope. Recommended drum working capacity is 80% of values shown.(3) Max storage capacity is tightly wound with no freeboard.
General Characteristics. Performance at 6.3 bar (90 psi) air inlet pressure with the motor running
Motor Lifting Speed at Top Layer
Air Consumptionwith Rated Load
Air Volume Needed to Move
Rated Load at Top Layer
Sound Level as per EN 14492-1
Net Weight
Model kW (hp) m/min (f/fpm) m3/min (ft3/min) 3 m (10 ft) dB(A) kg (lb)
FA150KGiMR 1.5 (2) 29 (95) 14 (50) 0.4 (17.2) 89 340 (750)
Drum Capacity
Model
Minimum Rope Breaking Force(1)
Recommended Rope Diameter
Drum Capacity per Layer(2)
m (ft)kN (lbs) mm (in) Layer 1 Layer 2 Layer 3 Layer 4 Layer 5
FA150KGiMR 14.7 (3,300) 10 (7/16) 26 (77) 54 (161) 84 (249) 115 (344) 148 (445)
Model Layer 6 Layer 7 Layer 8 Layer 9 Layer 10 Layer 11
Max. Rope Storage Capacity(3)
m (ft)
FA150KGiMR 183 (551) 220 (663) 259 (780) 299 (904) 341 385 385 (904)
Drum guard with manual rope guide
Available Options
For more options or custom configuration, please contact us at www.ingersollrandproducts.com/lifting or lifting@irco.com
For More Information www.ingersollrandproducts.com/lifting lifting@irco.com
www.ingersollrandproducts.com © 2015 Ingersoll Rand IRITS-0615-052
Ingersoll Rand, IR, the IR logo and Impactool are trademarks of Ingersoll Rand, its subsidiaries and/or affiliates. All other trademarks are the property of their respective owners. Nothing contained on these pages is intended to extend any warranty or representation, expressed or implied, regarding the product described herein. Any such warranties or other terms and conditions of sale of products shall be in accordance with Ingersoll Rand’s standard terms and conditions of sale for such products, which are available upon request. Product improvement is a continuing goal at Ingersoll Rand. Designs and specifications are subject to change without notice or obligation. Unless otherwise noted this equipment is not designed for transporting people or lifting loads over people. It is the user’s responsibility to determine the suitability of this product for any particular use and to check compliance with applicable regulations. Before installation, see maintenance and operations manual for additional warnings and precautions.
Drum Length(in)12
Drum BrakeA Auto drum brake
Control 1 Std. winch mounted
Options7 Drum grooving; specify rope size in sixteenths, e.g., 7 = 7/16"A Drum guard with manual rope guideB Winch pedestal baseC1M3 -20 ̊C ABSC2M3 -20 ̊C DNVH Stainless steel hose package for limit switchK Stowage valve kit installed on winchM1 (1) Per DIN 50049/EN10204 Para 2.2 “Typicals”M2 (1) Per DIN 50049/EN10204 Para 3.1 actual per product as purchasedM3 (1) Per DIN 50049/EN10204 Para 3.1 actual per product as delivered in final condition N4 Manufactured under ABS survey N5 Manufactured under DNV survey P1 Marine 812-X paint systemP2 Marine 812-X paint system - isocyanate freeR Emergency lowering systemW1 ABS witness testW2 DNV witness testW3 LRS witness testW4 Client witness of load test-CE Compliance with the European Machinery
Directive and EN14492-1 for power driven winches
NOTE:(1) M1 – Material traceability certificates according to EN 10204 (Ex DIN 50049) 2.2 on load bearing parts.
This conformity document affirms (by the manufacturer) that parts are in compliance with the requirements of the order based on non-specific inspection and testing (i.e., results are typical material properties for these parts).
M2 – Material traceability certificates according to EN 10204 (Ex DIN 50049) 3.1b on load bearing parts. These documents affirm (by a department independent of the manufacturing department) that the actual parts used in the product are in compliance with the order based on specific inspection and testing (i.e., results are actual material properties for those parts).
M3 – Material traceability certificates according to EN 10204 (Ex DIN 50049) 3.1b on load bearing parts. These documents affirm (by a department independent of the manufacturing department) that the actual parts used in the product are in compliance with the order based on specific inspection and testing (i.e., results are actual material properties for those parts in a finished, as delivered condition).
Personnel Capacitykg (lb)150KGi 150 (330)
MR 12 A 1 BHRP1150KGiFA
SeriesFA Air powered
-
Man Rider®MR Man Rider®
How to Order
Seattle, USA
Charlotte, USA
Brazil
Moscow, Russia
Australia
Johannesburg, South Africa
United Arab Emirates
Singapore
Shanghai, China
Korea
Brussels, BelgiumManchester, UK
Douai, France
Mexico City
Oberhausen, Germany
JapanHouston, USA
Edmonton, Canada
A Tradition of Proven Reliability, Efficiency and Productivity
No matter where you are located, Ingersoll Rand is committed to serving and providing you with the necessary information with regard to our products and services. Our world-wide network of distributors, certified technicians and engineers are a telephone call away — ready to support you with innovative and cost-effective solutions that will keep your business running at peak performance.