Post on 31-Jan-2018
EX3600 -6 SPECIFICATIONS
B A C K H O E B U C K E T C A PA C I T Y :( S A E H E A P E D ) : 2 8 . 8 Y D 3 ( 2 2 . 0 M 3 )
S H O V E L B U C K E T C A PA C I T Y ( H E A P E D ) : S A E ( 2 : 1 ) : 2 7 . 5 – 3 0 . 0 Y D 3 ( 2 1 . 0 – 2 3 . 0 M 3 )
O P E R A T I N G W E I G H T: B A C K H O E 7 9 5 , 9 0 0 L B . ( 3 6 1 0 0 0 K G )L O A D I N G S H O V E L 7 9 1 , 5 0 0 L B . ( 3 5 9 0 0 0 K G )
R A T E D P O W E R : 1 , 9 4 4 H P ( 1 4 5 0 K W )
S TA N D A R D E Q U I P M E N T
Engine140 A alternator
Heavy-duty type air cleaner with dust ejector
Cartridge-type engine oil filter
Cartridge-type engine oil bypass filter
Cartridge-type fuel filter
Fan guard
Isolation-mounted engine
Auto-idle engine
Emergency engine stop system
Hydraulic drive cooling-fan system
Hydraulic SystemE-P control system
OHS (Optimum Hydraulic System)
FPS (Fuel-saving Pump System)
Hydraulic drive cooling-fan system
Forced-lubrication and forced cooling pump
drive system
Control valve with main relief valve
Suction filter
Full-flow filter
Bypass filter
Pilot filter
Drain filter
High-pressure strainer
CabSturdy cab with top guard conforming to ISO
(OPG Level II)
Fluid-filled elastic mounts
Laminated glass windshield
Reinforced/tinted (bronze color) side and rear
windows
Parallel-link-type intermittent windshield wiper
Front windshield washer
Adjustable reclining seat with air suspension
Footrest
Air horn with electric compressor
Auto-tuning AM-FM radio with digital clock
Seat belt
Storage spaces
Floor mat
Auto air conditioner with defroster
Rearview mirror
Evacuation hammer
Emergency escape device
Trainer's seat
Pilot control shut-off lever
Monitor SystemsMeters
Hour-meter
Fuel gauge
Hydraulic oil temperature gauge
Engine coolant temperature gauge
Tachometer
Engine oil pressure gauge
Engine oil temperature gauge
Battery voltage gauge
Ambient temperature
Warning Indicators
Alternator
Engine stop
Coolant overheat
Hydraulic oil level
Auto lubrication
Fast-filling
Tension
Electric lever
Emergency engine stop
Top valve
Engine over run
Coolant level
Engine oil pressure
Pump transmission oil level indicator
Exhaust temperature
Fuel temperature
Engine warning
Hydraulic oil overheat
Stairway position
Electrical equipment box
Pump contamination
Air cleaner restriction
Satellite data transmitting system
Data Logging SystemDLU (Data-logging unit) continuously records
performance of the engine and the hydraulic
system. The record can be downloaded by PC
and PDA.
Lights9 working lights, 2 entrance lights,
7 maintenance lights, 2 cab lights
UpperstructureLockable machine covers
88,630 lb. (40 200 kg) counterweight
Hydraulic drive grease gun with hose reel
Retractable ladder with spring type balancer
Swing parking brake
UndercarriageTravel parking brake
Travel motion alarm device
Hydraulic track adjuster with N2 gas accumulator
and relief valve
50 in. (1 270 mm) triple grouser shoes
MiscellaneousStandard tool kit
ISO conforming stairs and handrails
Recirculation air filter for air conditioner
Ventilation air filter for air conditioner
12 V power terminal board
Stop valve for transport and reassembly
Auto-lubrication system (Lincoln) for front-
attachment pins, swing bearing, and center joint.
Fast-filling drop down panel with Wiggins coupler
for fuel, engine oil, engine coolant, grease,
pump transmission oil, and swing device oil.
O P T IONA L E Q U I P M E N T
High brightness working lights
Back and right side cameras with color monitor
Travel motor guard
Travel device guard
Electric oil pump to draw hydraulic oil from suc-
tion and return pipe lines
EX3600 -6 DIMENSIONS
EX3600 -6 SPECIFICATIONSE N G I N E
Make CumminsModel QSK60-C
Type 4 cycle
Aspiration Turbocharged and after cooled, direct injection chamber-type diesel engine
Net Power @ 1800 rpm (DIN 6271) 1,968 ps (1 450 kW)
Net Power @ 1800 rpm (SAE J1349) 1,944 hp (1 450 kW)
Gross Power @ 1800 rpm (SAE J1995) 1,944 hp (1,450 kW)
Maximum Torque @ 1500 rpm 6,156 lbf-ft (8 346 N-m)
Bore & Stroke 6.3 in. x 7.5 in. (159 x 190 mm)
Displacement 3,741 cu. in. (60.4 liters)
Batteries 4 x 12 V, 4 x 220 AH
Starting 24-volt electric
Cold Starting Ether aided
H Y D R A U L I C S Y S T E M
Hitachi’s Electronic Total Control System (ETS) achieves maximum efficiency, productivity, and operator comfort through reduced fuel consumption, lower noise levels, optimized engine-pump functions, and excellent controllability.
Engine-Pump Control (E-P)Main pumps are regulated by electronic engine-speed sensing control system.
Optimum Hydraulic SystemFour tandem-axial piston pump groups (eight pumps in total), supply a four-valve hydraulic system enabling both independent and combined operations of all functions.
Additional FeaturesFuel-Saving Pump (FPS) system
Auto-idling system
Hydraulic-drive cooling-fan system for oil cooler
Forced-lubrication and forced-cooling pump drive system
Main PumpsEight variable-displacement, piston pumps in four tandem-axial pump groups for front attachment, travel, and swing functions.
Pressure setting 4,270 psi (300 kgf/cm²) (29.4 MPa)
Max. oil flow 8 x 132.1 gal/min (8 x 500 L/min)
Pilot PumpGear pump
Pressure setting 640 psi (4.4 MPa) (45 kgf/cm²)
Maximum oil flow 29.0 gal/min (110 L/min)
Relief Valve SettingsImplement circuit 4,270 psi (300 kgf/cm2) (29.4 MPa)
Swing circuit 4,270 psi (300 kgf/cm2) (29.4 MPa)
Travel circuit 4,270 psi (300 kgf/cm2) (29.4 MPa)
Pilot circuit 640 psi (450 kgf/cm2) (4.4 MPa)
Hydraulic CylindersHigh-strength piston rods and tubes. Cylinder cushion mechanisms are provided for boom, arm, bucket and dump cylinders. Bucket cylinder of loading shovel is provided with protector.
Cylinder Dimensions (Backhoe) Cylinder Dimensions (Loading Shovel)Quantity Bore Rod Diameter Quantity Bore Rod Diameter
Boom 2 14.2 in. (360 mm) 10.2 in. (260 mm) Boom 2 14.2 in. (360 mm) 10.2 in. (260 mm)
Arm 2 11.8 in. (300 mm) 8.7 in. (220 mm) Arm 1 11.8 in. (300 mm) 8.7 in. (220 mm)
Level 1 14.2 in. (360 mm) 10.2 in. (260 mm)
Bucket 2 9.8 in. (250 mm) 7.1 in. (180 mm) Bucket 2 11.0 in. (280 mm) 7.9 in. (200 mm)
Dump 2 8.9 in. (225 mm) 5.1 in. (130 mm) Hydraulic FiltersAll hydraulic circuits have high-quality hydraulic filters for protection against oil contamination and longer life of hydraulic components. Filters are centralized for convenient maintenance.
QuantityFull flow filter 5 10 µm
High pressure strainer (In main & swing pump delivery line) 8 80 meshes
Drain filter (For all plunger type pumps & motors) 1 10 µm
Pilot filter 1 10 µm
By-pass filter (In oil cooler by-pass line) 1 5 µm
C ON T R OL S
Two Implement LeversWrist control type electric lever. Right lever is for boom and bucket control, left lever for swing and arm control.
For loading shovel, two pedals provided for opening/closing the bottom dump bucket.
Two Travel Levers with PedalsRemote-controlled hydraulic servo system. Independent drive at each track allows counter rotation of tracks.
U P P E R S T R U C T U R E
Revolving FrameDeep, full-reinforced box section. Heavy-gauge steel plates used for ruggedness.
Deck MachineryDeck machinery is positioned for maximum maintenance accessibility. Sidewalks provide easy access to engines, hydraulic and electrical components.
ISO-compliant stairs and handrails. Sidewalks and stairs are provided with skid-resistant plates.
S W I N G M E C H A N I S M
Four high-torque, axial-piston motors with two-stage planetary reduction gear bathed in oil. Swing circle with dirt seals is a heavy-duty, triple-row,
cylindrical roller bearing. Induction-hardened internal swing circle gear and pinion immersed in lubricant. Swing parking brake is spring-set, hydraulic
released disc type. This parking brake is manually releasable.
Swing Speed 3.2 min-1 (rpm)
O P E R AT O R ’ S C A b
The sturdy cab, with the top guard conforming to OPG Level II (ISO), protects the operator from falling objects. Independent, pressurized, 1 800 mm
wide, 2 150 mm high, roomy 7.5m³ cab with tinted-glass windows features all-round visibility. Spring-suspension type, fully adjustable reclining seat
with arm rests; movable with or without front & swing control levers by slide. Instrument and control panel are built in cab wall in easy range of the
operator. Three air conditioner system.
Noise level 76 dB (A) in the cab at maximum engine speed under no-load condition.
Eye level height 22 ft. 2 in. (6 760 mm)
U N DE R C A R R I AGE
TracksShovel-type undercarriage. Dual-flanged-type bolt linkage for side frame and X-form center frame assures durability. Heavy-duty track frame of
all-welded, stress-relieved structure. Top-grade materials used for toughness. Lifetime-lubricated induction-hardened track rollers, idlers and drive
tumblers with floating seals. Specially heat-treated connection pins. Hydraulic track adjuster provided with N2 gas accumulator with relief valve.
Track adjuster provided with protection device against abnormal tension. Travel motion alarm device.
Shovel-Type UndercarriageTriple grouser track shoes of induction-hardened cast steel
Shoe Width 50 in. (1 270 mm)
Number of Rollers and Shoes (each side)Upper Rollers 3
Lower Rollers 8
Track Shoes 38
Traction DeviceEach track driven by high-torque, axial piston motors, allowing counter rotation of tracks. two-stage planetary gear plus spur gears reduction device.
Dual-support-type traction device. Parking brake of spring-set/hydraulic-released disc type. This parking brake is manually releasable.
Travel Speeds Low: 1.5 mph (2.2 km/h)
High: 1.0 mph (1.7 km/h)
Max. Traction Force 395,700 lbf (179 500 kgf)
Gradability 30° (60%) continuous
W E I G H T S A N D G R O U N D P R E S S U R E
Loading Shovel: Equipped with 27.5 yd³ (21.0 m³) (SAE heaped) bottom dump bucket.
Shoe Type Shoe Width Operating Weight Ground Pressure
Triple Grousers 50 in. (1 270 mm) 795,900 lb. (361 000 kg) 27.4 psi (189 kPa) (1.93 kgf/cm³)
Backhoe: Equipped with 31 ft. 6 in. (9.6 m) BE-boom, 14 ft. 9 in. (4.5 m) BE-arm, and 29.0 yd³ (22.0 m³) (SAE heaped) bucket
Shoe Type Shoe Width Operating Weight Ground Pressure
Triple Grousers 50 in. (1 270 mm) 791,500 lb. (359 000 kg) 27.3 psi (188 kPa) (1.92 kgf/cm²)
EX3600 -6 SPECIFICATIONS
1 8
9
2 7
5
63
4
1. Left Console
2. Left Control Lever/Horn Switch
3. Left Travel Pedal
4. Left Travel Lever
5. Right Travel Lever
6. Right Travel Pedal
7. Right Control Lever/Horn Switch
8. Right Console
9. Operator's Seat
10. Bucket Close Pedal (For Loading Shovel)
11. Bucket Open Pedal (For Loading Shovel)
12. Pilot Control Shut-Off Lever
13. Rear Console
14. Emergency Engine Stop Switch
15. Engine Speed Control Dial
16. Key Switch
17. Monitor Display
bACKHOE CONTR OL L AYOUT
1. Engine
2. Engine Radiator3. LTA Radiator
4. Fan Motor x 45. Air Filter x 4
6. Hydraulic Pump x 87. High-Pressure Strainer x 8
8. Battery Unit
9. Engine-Pump Bulkhead
10. Muffler
11. Swing Device x 4
12. Control Valve x 4
13. Center Joint
14. Hydraulic Oil Tank
15. Fuel Tank
16. Hydraulic Oil Cooler x 4
17. Hydraulic Oil Cooling Fan Motor x 2
18. Lubricator
19. Cab
20. Folding Stairs
21. Ladder
22. Reserve Tank (Engine Oil)
23. Pump Mission Oil Cooler
24. Fuel Cooler
25. Reserve Tank (Coolant)
26. Engine-Radiator Bulkhead
4
5
68
7
1
23
9
DECK M ACHINERY L AYOUT
SERV ICE REFI LL CA PACITIES US Gallons Liters Imperial Gallons
Fuel Tank 1,968 7 450 1,639
Engine Coolant 162 614 135
Engine Oil (Engine Oil Pan) 69 261 57
Engine Oil (Reserve Tank) 75 284 62
Pump Drive 14 52 11.4
Swing Device (each side) 4 x 20 4 x 75 4 x 16.5
Travel Final Device (each side) 2 x 58 2 x 220 2 x 48.4
Hydraulic Tank 1,057 4 000 880
Hydraulic System 502 1 900 418
L OA DI N G S H OV E L AT TAC H M E N T
Boom and arm are of all-welded, low-stress, high-tensile strength steel full-box section design. Efficient, automatic level crowing achieved by one-lever control because parallel link mechanism keeps the bucket digging angle
constant, and level cylinder circuit maintains the bucket height constant (Auto-Leveling Crowd Mechanism).
Boom and arm are all-welded, low-stress, high-tensile strength steel full-box section design. Efficient, automatic level crowding achieved by one-lever control because parallel link mechanism keeps the bucket digging angle
constant, and level cylinder circuit maintains the bucket height constant (Auto-Leveling Crowd Mechanism).
Dual-support-type boom/arm/bucket pin linkage
Pin seals (in all portions) plus O-ring at arm top
All cylinders are provided with a cylinder cushion mechanism
Bucket cylinders with loading shovel are provided with an internal cylinder rod protector
EX3600 -6 SPECIFICATIONS
WORKING R ANGES—bUCKET CAPACIT Y: 27.5 yd³ (21.0 m³)
A. Min. digging distance 19 ft. 2 in. (5 850 mm)
B. Min. level crowding distance 29 ft. 1 in. (8 870 mm)
C. Level crowding distance 16 ft. 7 in. (5 050 mm)
D. Max. digging reach 49 ft. 11 in. (15 220 mm)
E. Max. cutting height 53 ft. 6 in. (16 300 mm)
E1. Max. dumping height 36 ft. 1 in. (10 990 mm)
F. Max. digging depth 12 ft. 0 in. (3 910 mm)
G. Working radius at max. dumping height 28 ft. 5 in. (8 650 mm)
H. Max. bucket opening width 6 ft. 5 in. (1 950 mm)
Arm crowding force 269,800 lb. (122 000 kgf) (1 200 kN)
Breakout force 254,000 lb. (115 000 kgf) (1 130 kN)
bUCKET (SAE HEAPED 2:1)
Capacity Width Number of Teeth Weight Type Materials Density27.5 yd³ (21.0 m³) 13 ft. 8 in. (4 160 mm) 6 59,300 lb. (26 900 kg) Bottom dump type, general purpose 3,033 lb./yd³ (1 800 kg/m³)
30.0 yd³ (23.0 m³) 13 ft. 8 in. (4 160 mm) 6 60,190 lb. (27 300 kg) Bottom dump type, general purpose 2,700 lb./yd³ (1 600 kg/m³)
Note: These buckets do not include any type of wear protection for sides, bottom, and inside the bucket. Please consult your local Hitachi dealer for a proper wear protection system for your application.
Please do not use the buckets without proper wear protection for your application.
b AC K H O E AT TAC H M E N T
Boom and arm are all-welded, low stress, full-box section design. Bucket of all-welded high-strength steel structure. Bucket/arm joint pins are floating type.
Replaceable thrust plates are provided with bucket/arm point part. Auto-lubrication system for all pins is standard.
WORKING R ANGES
Boom Length 31 ft. 6 in. (9.6 m)Arm Length 14 ft. 9 in. (4.5 m)
A. Max. digging reach 59 ft. 8 in. (18 190 mm)
A1. Max. digging reach (on ground) 57 ft. 9 in. (17 600 mm)
B. Max. digging depth 28 ft. 2 in. (8 580 mm)
B1. Max. digging depth (8 ft. level) 27 ft. 10 in. (8 490 mm)
C. Max. cutting height 58 ft. 1 in. (17 690 mm)
D. Max. dumping height 38 ft. 0 in. (11 590 mm)
E. Max. vertical wall depth 13 ft. 4 in. (4 060 mm)
Bucket Digging ForceSAE 209,500 lb. (932 kN)
ISO 236,000 lb. (1 050 kN)
Arm Crowd Force SAE 207,300 lb. (922 kN)
ISO 213,800 lb. (952 kN)
bUCKET
Capacity Width Number of Teeth
Weight Type Materials DensitySAE Heaped (1:1) Without Side Cutters
29.0 yd.³ (22.0 m³) 12 ft. 5 in. (3 790 mm) 6 40,570 lb. (18 400 kg) General purpose bucket 3,033 lb./yd³ (1 800 kg/m³)
Note: These buckets do not include any type of wear protection for sides, bottom, and inside the bucket. Please consult your local Hitachi dealer for a proper wear protection system for your application.
Please do not use the buckets without proper wear protection for your application.
UPPERSTRUCT URE
EX3600 -6 SHIPPING INF ORM ATIONEX3600-6 components are designed for ease of transportation and on-site assembly.
Components can be assembled without welding.
Bucket Capacity A B Max. Width Weightft. in. (mm) ft. in. (mm) ft. in. (mm) lb. (kg)
27.5 yd³ (21.0 m³) 12 ft. 9 in. (3 890 mm) 11 ft. 9 in. (3 570 mm) 13 ft. 8 in. (4 160 mm) 59,300 lb. (26 900 mm)
30.0 yd³ (23.0 m³) 13 ft. 9 in. (4 190 mm) 11 ft. 10 in. (3 600 mm) 13 ft. 8 in. (4 160 mm) 60,190 lb. (27 300 mm)
L OA DING SHOV EL AT TACHMENT S
LIFTING CA PACITIES
R ATING OV ER SIDE OR 360 -DEGREES R ATING OV ER FRONT
ConditionsLoad Point
Height
LOAD R ADIUSAt Maximum Reach
26 ft. 3 in. (8 m) 32 ft. 10 in. (10 m) 39 ft. 4 in. (12 m) 45 ft. 11 in. (14 m) 49 ft. 3 in. (15 m) 52 ft. 6 in. (16 m)
ft. in. (meter)
BE-boom: 31 ft. 6 in. (9.6 m)BE-arm: 14 ft. 9 in. (4.5 m)Bucket SAE: 28.5 yd³ (22.0 m³)
42 ft. 8 in. (13 m)
*65.0 *65.0 *44.0 *44.0 34 ft. 10 in.
(*29.5) (*29.5) (*15.4) (*15.4) (15.8 m)
39 ft. 4 in. (12 m)
*68.3 *68.3 *32.9 *32.9 35 ft. 11 in.(*31.0) (*31.0) (*14.9) (*14.9) (16.3 m)
32 ft. 10 in. (10 m)
*65.7 *65.7 *61.7 *61.7 *31.8 *31.8 37 ft. 8 in.
(*29.8) (*29.8) (*28.0) (*28.0) (*14.4) (*14.4) (17.1 m)
26 ft. 3 in. (8 m)
*69.2 *69.2 *70.3 *70.3 *60.0 *60.0 *32.0 *32.0 38 ft. 10 in.
(*31.4) (*31.4) (*31.9) (*31.9) (*27.2) (*27.2) (*14.5) (*14.5) (17.6 m)
19 ft. 8 in. (6 m)
*97.9 *97.9 *87.1 *87.1 *80.5 *80.5 *72.3 *72.3 *33.1 *33.1 39 ft. 0 in.
(*44.4) (*44.4) (*39.5) (*39.5) (*36.5) (*36.5) (*32.8) (*32.8) (*15.0) (*15.0) (17.7 m)
13 ft. 1 in. (4 m)
*175.5 *175.5 *130.1 *130.1 *96.3 *97.7 83.1 *84.0 *58.4 *58.4 *35.5 *35.5 38 ft. 7 in.
(*79.6) (*79.6) (*59.0) (*59.0) (*43.7) (*44.3) (37.7) (*38.1) (*26.5) (*26.5) (*16.1) (*16.1) (17.5 m)
6 ft. 7 in. (2 m)
168.9 178.1 122.6 *136.9 91.7 *107.8 79.6 *95.5 *60.9 *60.9 *39.2 *39.2 37 ft. 8 in.
(76.6) (80.8) (55.6) (*62.1) (41.6) (*48.9) (36.1) (*43.3) (*27.6) (*27.6) (*17.8) (*17.8) (17.1 m)
0 (Ground)162.9 168.7 117.7 *131.2 88.4 *105.8 77.4 *87.3 *40.8 *40.8 35 ft. 11 in.
(73.9) (76.5) (53.4) (*59.5) (40.1) (*46.0) (35.1) (*39.6) (*18.5) (*18.5) (16.3 m)
-6 ft. 7 in. (-2 m)
*138.5 *138.5 *147.5 *147.5 115.7 *116.0 *86.0 *86.0 *67.9 *67.9
(*62.8) (*62.8) (*66.9) (*66.9) (52.5) (*52.6) (*39.0) (*39.0) (*30.8) (*30.8)
-13 ft. 1 in. (-4 m)
*128.1 *128.1 *113.5 *113.5 *88.2 *88.2 *52.5 *52.5
(*58.1) (*58.1) (*51.5) (*51.5) (*40.0) (*40.0) (*23.8) (*23.8)
-16 ft. 5 in. (-5 m)
*99.4 *99.4 *90.4 *90.4 *66.8 *66.8
(*45.1) (*45.1) (*41.0) (*41.0) (*30.3) (*30.3)
Notes: 1. Ratings are based on SAE J1097.
2. Lifting capacity of the EX Series does not exceed 75% of tipping load with the machine on firm, level ground or 87% full hydraulic capacity.
3. The load point is a hook (not standard equipment) loaded on the back of the bucket.
4. *Indicates load limited by hydraulic capacity.
UNIT 1 ,000 Lb. (1000 KG)
It’s our color. It’s our brand. New product-support initiatives and our
strengthened dealer network is more proof that we are as passionate as
ever about this industry. We are dedicated to building the best equipment
in the world and keeping it painted Hitachi Orange.
DKAEX3600HT Litho in U.S.A. (08-04)
OUR NA ME L OOKS GOOD ON OR A NGE.
www.hitachimining.com Specifications and design subject to change without notice.