STANDARD FEATURES8 High reliability & availability8 Rugged pedigree & provenance8 World benchmark Aftersales Service8 Quiet in operation8 Low Emission Burners8 High Efficiency - over 90%8 Double insulated air & mineral wool8 Cold to full steam in 5 minutes8 High steam dryness8 PED Approved 97/23-CE by Lloyds 00388 Fully Packaged & works tested8 Inverter varispeed drives for precise control

of feed water, fuel & combustion air8 Safe design. No large pressure vessels8 Sealed rotary positive displacement

feed pump8 Gasoil/LPG/Nat gas fuels8 10, 15 and 20 bar operating pressures

EUROSTEAM is a fully featured advanced design of once through coil type steam generator technology designed for the needsof industry in the 21st century and to comply with the anticipated legislation on efficiency and emission control.

OPTIONAL FEATURES8 Exhaust gas recirculation for lowest emissions8 Fully modulating burner and feedwater control8 Automatic control for unattended operation8 Turnkey design and installation8 Steam separator for certain applications

ABOUT USBabcock Wanson is part of the International CNIMorganisation World leaders in environmental andenergy industries.

SERVICE AND PLANT CAREBabcock Wanson worldwide specialise in Serviceand plant care with particular accent onpreventative maintenance for all areas of ourbusiness. In the UK our large team of fully qualifiedService Engineers is able to provide the essentialaftercare needs of the wide variety of equipmentavailable from our Group from Boilers to ThermalOxidisers and from Air Heat Systems to WaterTreatment and Thermal Fluid Systems. These servicefacilities are available from our other GroupCompanies throughout Europe and major industrialareas across the world.

EUROSTEAM - ESM

BS EN ISO 9001 1994

Cert. No. FM 29856

BCEMA

UPTO 4 t/h STEAMOVER 50 YEARS OF PROGRESSIVE COIL BOILER DEVELOPMENT

EUROSTEAM - ESMMODEL 2000

Babcock Wanson UK Ltd 7 Elstree Way, Borehamwood, Hertfordshire WD6 1SA, UKTel: 020 8953 7111 Fax: 020 8207 5177 email: info@babcock-wanson.co.uk Web. www.babcock-wanson.co.uk

Sales and Manufacturing facilities in United Kingdom, France, Italy, Morocco, Central Europe, Portugal, Spain and Switzerland.The Babcock Wanson Organisation operates in more than 50 countries. This network makes it possible to offer services to Babcock Wanson customers anywhere in the world.

Babcock Wanson Company’s policy is one of continuous improvement and the right is reserved to change specifications and dimensions at any time without notice.

EUROSTEAM UK/02/03/GPR/JN.2521/QT.2K

“125 years of Babcock – 75 years of Wanson – 47 years of Wanson UK.There is no substitute for experience.”

EUROSTEAM PERFORMANCE AND DIMENSIONS

EUROSTEAM MODEL ESM1000

ESM1250

ESM1500

ESM1750

ESM2000

ESM2500

ESM3000

ESM3500

ESM4000

Steam Output F & A 100oC kg/h

At 10 bar from feed at 60oC kg/h

kW

1118 1400 1678 1958 2237 2797 3356 3915 4475

1000 1250 1500 1750 2000 2500 3000 3500 4000

700 875 1050 1225 1400 1750 2100 2450 2800

Fuel consumption gasoil litres/hNatural gas (G20) m3/h

8082

100103

120123

140144

160165

200205

240246

280287

320329

Weight full kg 2850 2850 2900 2900 2900 5000 5000 5050 5100

Recommended stack i/dia mm 356 356 406 457 457 508 508 610 610

Dimensions A mm

B mm

C mm

1760 1760 1820 1820 1820 2050 2050 2270 2270

2000 2000 2000 2000 2000 2400 2400 2400 2400

2980 2980 2980 2980 2980 4300 4300 4300 4300

B

A C

COMPLEMENTARY PRODUCTSBabcock Wanson complementary products include Air Heating Equipment for space and process applications, Thermal Fluid Heatersand systems for advanced energy and operational saving, coil type Steam Generators up to 8t/hr, Fire Tube Steam Boilers, Thermal

Oxidisers and VOC Abatement Equipment together with all associated equipment plus the Turnkey option.