Post on 02-Apr-2022
EUROMAG FLOW METER
Earthing Guide
EUROMAG FLOW METER – Earthing Guide
All Euromag flow meters are supplied with an earth lead fitted to the earth screw.
For compact mounted versions the earth screw is located directly underneath the converter display (see Fig.1) and for remote mounted versions it is located on the sensor junction box (see Fig.2). An earth cable is also connected from the earth screw to the earth bolts on both flanges.
Compact version Remote version
IMPORTANT! – Do not remove this earth cable.
Fig.1 Fig.2
Earth screw Earth screw
Earth bolts Earth bolts
When the flow meter is used on plastic pipes or metal pipes equipped with cathodic protection it is recommended that an additional earth cable be fitted to the earth screw which is to be independently grounded (see Fig.4).
DO NOT connect the earthing of the flow meter to any mains power earthing or the earthing of any external electrical equipment.
The meter also comes with an additional earth lead fitted to each earth bolt. This lead should be connected to the grounding rings supplied with the flow meter. The bolts and M8 nuts for fitting the grounding rings are also supplied.
To ensure a watertight seal a gasket should be fitted on either side of the grounding rings (see Fig.3).
Fig.3
Fig.4
Gaskets
Grounding ring
Grounding ring
Grounding ring
Grounding ringGrounding rod
Plastic pipe
Plastic pipe
Gaskets
Gaskets
Gaskets
Prog
etto
:
EUROMAG INTERNATIONAL srl
Sede legale e stabilimento: Via Torino 3 | 35035 Mestrino (Padova), Italia
Sede operativa: Via Pitagora 20 | 35030 Rubano (Padova), Italia
Tel. +39 049.9005064 | Fax +39 049.9007764
euromag@euromag.com
www.euromag.com | www.euromagdata.com
All rights reserved. No part of this catalogue may be reproduced, stored in a database or otherwise used without the authorisation of Euromag. The policy of Euromag is dictated by the continuing technological and project innovation. Therefore, the Company reserves the right to amend the data contained herein without notice.
DS4
01-0
-EN
G
Bermad Australia Pty Ltd | ABN 62 093 801 220 | www.bermad.com.au | Edition 1
www.bermadmeters.com.au
Victoria Tel: 03 9464 2374 26 Brand Drv Thomastown 3074
New South Wales Tel: 02 9746 1788 31/42-50 Hampstead Rd Homebush West 2140
Queensland Tel: 07 3205 3431 105/193 South Pine Rd Brendale 4500
South Australia / NT Tel: 08 8359 8696 2/43 Douglas Drv Mawson Lakes 5095
Western Australia Tel: 08 9227 0014 11/117 Brisbane St Northbridge 6003
Enquiries info@bermad.com.auwww.bermadmeters.com.au