ESD Constant Monitor System
•Packaging
•Bench set-up
Mat box includes a package containing the mat’s grounding cord
ESD Mat Ground Cord
plastic bag containing:
monitor to mat cord
ground cord for monitor
screws for remote jack and monitor
Monitor box containsMonitor
732 remote jack
manual
power supply
Mounting screws for 732 Remote
Mounting screwsfor monitor
Connector for Monitor to Ground and Monitor to Mat connections
Adhesive backed tie-downs and tie straps to dress wire
Some contents of Monitor box Plastic Bag
Monitor to Ground Cord
(found in Monitor box plastic bag)
Monitor to Mat Cord
(found in Monitor box plastic bag)
Shipped separate from Mat & Monitor
Shipped separate from Mat & Monitor
• Cut the ground pigtail from the power supply cord
Use flush cutters tocut the pigtail off at molded plastic button
Power Supply connected to Monitor
Snap Mat Ground Cord onto Mat
Mat Ground Cord
Connect this end to ground
Snap Monitor to Mat Cord into Place(found in plastic bag)
Monitor to Mat
Cord
Connect this end to Monitor
Connector used to connect Monitor to ESD Mat cord and Monitor to ground
cord
Monitor to Mat Cord
Monitor to Ground Cord
(found in Monitor box plastic bag)
Monitor to Ground Cord
Monitor Ground Connection
Monitor to Mat Connection
Connect this endto ground
Monitor to Mat
Monitor to Ground
Monitor to 732 Remote Jack
732 Remote cord connected to Monitor
732 Remote mounted to bench
(Recess Remote to prevent damage to ESD Wriststrap
Cords)
Recommend Switches be set as indicated for maximum ESD protection
Switch #1Soft Off
Switch #2
Mat Audible
Dip Switch Settings
Loud On
Switch # 2 Mat AudibleMat Audible
Recommend switches set as indicated
6580-01-283-99666580-01-283-9966
This product should be used for cleaning ESD Mat(Reconditions mat staticdisipative surface)
NOT PERMITTED IN STATICNOT PERMITTED IN STATICCONTROL AREASCONTROL AREAS
Styrofoam / Plastic CupsStyrofoam / Plastic Cups Polyethylene Envelopes, Sheets, Bags etc..Polyethylene Envelopes, Sheets, Bags etc.. Common Bubble-Pack and PackagingCommon Bubble-Pack and Packaging
FoamFoam Scotch TapeScotch Tape Rubber PadsRubber Pads Plastic Tote BoxesPlastic Tote Boxes Unnecessary Insulating Materials inUnnecessary Insulating Materials in
GeneralGeneral
1350-01-264-68981350-01-264-6898
Used to wipe down prime generators that must be used in ESD Safe Areas
732 Remote
AC Adapter
Static Dissipative Mat
Ground
Ground
Monitor
Ground
Ground
Monitor
732 Remote
AC Adapter
ESD MatStatic
Dissipative
To prevent a false positive
indication do not connect these grounds
together(use same ground but
different locations)
Hook ESD Constant Monitor as shown in the above block diagram
Remove rubber feet from bottom of mat if the mat bows due to heavy items on mat
Use a non metallic tool such as a Spudger
“WP” Norris 2M Project Offi ce2M Project Offi ce Code 6083 Bldg 3241Code 6083 Bldg 3241
(812) 854- 3192 FAX: 854- 3855(812) 854- 3192 FAX: 854- 3855 norris_w@crane.navy.milnorris_w@crane.navy.mil