Post on 24-Dec-2021
latest developments in telephone and satellite products.
Mode® accessories have been conceived
and modern solution to virtually any domestic wiring requirement. The smooth, modern lines of the Mode® accessory
contemporary designs alike. The modular design of Mode® allows designers and
creating dedicated wiring solutions to deal
words, there is now no need to compromise Mode® accessories provide the complete solution to modern wiring needs.
There are many crucial elements of any interior design – the more obvious ones are décor and furnishings. Less obvious but no less important are electrical accessories; particularly wall accessories which, by their very nature need to be located in prominent line of sight positions.
When selecting wiring accessories designers have often compromised their schemes as they have been unable to identify a suitably
Mode® accessories can now provide that
of products ranging from the humble light switch and socket outlet through to more specialised products dealing with the very
A Stylish, Contemporary & Flexible Range of Smooth Profile Accessories
ContentsSwitches F5
F9
Power Socket Outlets F14
13A Fused Connection Units F18
Control Switches F19
Ceiling Accessories F23
Socket & Blank Plates F24
Telephone & Data Sockets F26
TV & Satellite F27
New Media™ Plates F28
F29
F30
Screw Caps All Mode® accessories are supplied with screw caps as standard, offering you a protective and decorative option should you wish to use them.
Antibacterial CertifiedMode® wiring accessories are manufactured using Urea Formaldehyde, which has similar inherent properties to antimicrobial additives that inhibit the growth of infectious diseases. All products independently tested achieved a 99.99% kill off rate across all four types of the strains of bacteria - MRSA, E-Coli, Salmonella, Klebsiella Pneumonia and enveloped viruses.
Antiviral CertifiedMode® plates have been independently tested and have shown to have anti-viral properties against enveloped and non-enveloped viruses. After a contact period of 4 hours, Mode® was shown to have a 99.9% kill off rate against enveloped viruses and a 92% kill off rate against non-enveloped viruses.
20 YEARNo Quibble Guarantee
All Mode® accessories are covered by our straight forward ‘No Quibble Guarantee’ against any fault in
within 20 years of the date of supply.
MO
DE®
F5
sales@scolmore.com | Call: 01827 63454 | scolmore.com
For the complete range of Minigrid® modules, see the dedicated Minigrid® section, page J18.
Plates Switches - MiniGrid®
CMA010 10AX 1 Gang 1 Way Plate SwitchCMA011 10AX 1 Gang 2 Way Plate SwitchCMA012 10AX 2 Gang 2 Way Plate SwitchCMA013 10AX 3 Gang 2 Way Plate SwitchCMA019 10AX 4 Gang 2 Way Plate SwitchCMA105 10AX 6 Gang 2 Way Plate Switch
Switch modules interchangeable with Minigrid® modules in Polar white
Wide Rocker Switches - Non Modular
CMA811 10AX 1 Gang 2 Way Wide Rocker SwitchCMA812 10AX 2 Gang 2 Way Wide Rocker SwitchCMA813 10AX 3 Gang 2 Way Wide Rocker SwitchCMA825CMA828 10AX 1 Gang 2 Way Wide Rocker Retractive Switch
Plates Switches - Non Modular
CMA9014 10AX 4 Gang 2 Way Single Plate Switch
Switches
Standards: BS EN 60669-1 Back Box Depth: 16mm Minimum Cable Size: 4 x 1.5mm² or 2 x 2.5mm² Non Modular: 2 x 1.5mm² Dimensions: 1 Gang: 86mm (W) x 86mm (H) x 9.5mm (D) 2 Gang: 146mm (W) x 86mm (H) x 9.5mm (D)
CMA010 | CMA011
CMA811 | CMA828
CMA019 CMA105
CMA012
CMA812
CMA013 CMA9014
CMA813
Switches10AX Plate Switches (Modular)
10AX Architrave Switches (Modular) Dimmer Switches | Control Switches
45A Switches | 50A Pull Switch
The products illustrated in this section
unfurnished mounting plates.
For comprehensive information on the full range of modules available please refer to our
Minigrid® product brochure.
The range of Mode® switches described in the following pages has been developed largely as a modular range based on the large selection of Polar White coloured switch modules
available in the Minigrid® module range - see opposite page.
These same modules are fully interchangeable in other Click®
accessory ranges such as metal clad, Deco® & Define® decorative
metal as well as the Polar™ moulded range.
offers the simplest possible means of installing and replacing modules.
Dedicated media transfer plates and modules are dealt with in the later pages of this catalogue in the New
Media™ section.
MO
DE®
F7
MO
DE®
F6
CLICK® WIRING ACCESSORIES sales@scolmore.com | Call: 01827 63454 | scolmore.com
Switch modules interchangeable with MiniGrid® For the complete range of MiniGrid® modules, see the dedicated MiniGrid® section, page J18.
Unfurnished Plates - MiniGrid®
CMA401 1 Gang MiniGrid® Unfurnished Plate - 1 ApertureCMA402 1 Gang MiniGrid® Unfurnished Plate - 2 AperturesCMA403 1 Gang MiniGrid® Unfurnished Plate - 3 AperturesCMA404 2 Gang MiniGrid®
CMA406 2 Gang MiniGrid®
CMA426 2 Gang MiniGrid®
CMA432 2 Gang MiniGrid® Unfurnished Plate - 3 Apertures
Unfurnished Plates
For the complete range of Minigrid® modules, see the dedicated Minigrid® section, page J18.
Architrave Switches - MiniGrid®
CMA171 10AX 1 Gang 2 Way Architrave SwitchCMA172 10AX 2 Gang 2 Way Architrave Switch
Architrave plates can be used with the dedicated architrave pattress boxes CMA175
WA671 & WA672. They will also not accept MD070 & MD075 Switch modules.
Plates Switches
CMA025CMA026 10AX 1 Gang 2 Way Key SwitchCMA027 10AX 1 Gang 1 Way Retractive ‘Bell’ SwitchCMA110 10AX 1 Gang DP ‘Emergency Test’ Key Switch
Switch modules interchangeable with Minigrid®
Switches
Standards: BS 5733 Back Box Depth: Dependent On Modules Fitted Dimensions: 1 Gang: 86mm (W) x 86mm (H) x 9.5mm (D) 2 Gang: 146mm (W) x 86mm (H) x 9.5mm (D)
Standards: BS EN 60669-1 Back Box Depth: 16mm Minimum 171 172: 25mm Minimum Cable Size: 4 x 1.5mm² or 2 x 2.5mm² 171 172: 2 x 1.5mm² Dimensions: 1 Gang: 86mm (W) x 86mm (H) x 9.5mm (D)
171: 32mm (W) x 86mm (H) x 9.5mm (D) 172: 32mm (W) x 146mm (W) x 9.5mm (D)
CMA401 CMA402
CMA404 CMA406
CMA426 CMA432
CMA403
CMA171
CMA172
CMA025 CMA026
CMA027 CMA110
CMA171
CMA172
CMA402CMA401 CMA403CMA025 CMA026
CMA027 CMA110
MO
DE®
F9
MO
DE®
F8
CLICK® WIRING ACCESSORIES sales@scolmore.com | Call: 01827 63454 | scolmore.com
Galvanised Steel Back Boxes
WA512WA518
Unfurnished Plates
2 Tier Unfurnished Plates - MiniGrid®
CMA612 2 Tier MiniGrid® Unfurnished Plate & Yokes - 12 Apertures - Mode®
3 Tier Unfurnished Plates - MiniGrid®
CMA618 3 Tier MiniGrid® Unfurnished Plate & Yokes - 18 Apertures - Mode®
Complete with yokes Switch modules interchangeable with MiniGrid®
complete range of MiniGrid® modules, see the dedicated MiniGrid® section, page J18.
Standards: BS 4662 Dimensions: 512: 137mm (W) x 137mm (H) x 47mm (D) 518: 137mm (W) x 197mm (H) x 47mm (D)
Standards: BS 5733 Back Box Depth: 47mm Minimum Dimensions: 612: 146mm (W) x 153mm (H) x 9.5mm (D) 618: 146mm (W) x 214mm (H) x 9.5mm (D)
The furnished plate shown here contains a selection of both single and twin width Minigrid® modules. The yoke ‘GR101’ is supplied enabling Minigrid® modules to be
mounted prior to assembling the front plate.
WA512 WA518
® plates. Mounting Yoke facilitates pre-assembly of required modules. Fitted with twin earth terminals.
CMA612
CMA618
CMA612
CMA618
similar height dimmer modules must be installed. Alternatively, retractive switch modules MD004 (page J21) can be used in conjunction with Click Smart+ dimming receivers (page A18).
MO
DE®
F11
MO
DE®
F10
CLICK® WIRING ACCESSORIES sales@scolmore.com | Call: 01827 63454 | scolmore.com
Standards: BS EN 60669-1 BS EN 60669-2-1 BS EN 55015 BS EN 61000-3-2 Type: Trailing Edge Back Box Depth: 25mm Minimum Cable Size: 2 x 1.5mm2 Dimensions: 1 Gang: 86mm (W) x 86mm (H) x 9.5mm (D) 2 Gang: 146mm (W) x 86mm (H) x 9.5mm (D)
Standards: BS EN 60669-1 BS EN 55015 BS EN 61000-3-2 BS EN 61000-3-3 Back Box Depth: 25mm Minimum Cable Size: 2 x 1.5mm² Type: Leading Edge Dimensions: 1 Gang: 86mm (W) x 86mm (H) x 9.5mm (D) 2 Gang: 146mm x 88mm x 8mm
Switches
Dimmer Switches (Trailing Edge)
CMA161 1 Gang 2 Way 100W Dimmer SwitchCMA162 2 Gang 2 Way 100W Dimmer SwitchCMA163 3 Gang 2 Way 100W Dimmer SwitchCMA164 4 Gang 2 Way 100W Dimmer Switch
We recommend the use of branded LED lamps with all Mode® trailing edge dimmers. The use of inferior, non-branded lamps may require the nominal rating of the dimmer to be reduced. For further information please contact Click® Technical support team.
Switches
CMA140, CMA145
CMA147 CMA148
CMA146 CMA161
CMA163 CMA164
CMA162
Dimmer Switches (Leading Edge)
CMA140 1 Gang 2 Way 400Va Dimmer SwitchCMA145 1 Gang 2 Way 250Va Dimmer SwitchCMA146 2 Gang 2 Way 250Va Dimmer SwitchCMA147 3 Gang 2 Way 250Va Dimmer SwitchCMA148 4 Gang 2 Way 250Va Dimmer Switch
We recommend the use of branded halogen lamps with all Mode® leading edge dimmers. The use of inferior, non-branded lamps may require the nominal rating of the dimmer to be reduced. These dimmer switches have not been designed for use with LED lamps. However, they may be suitable for some good quality LED lamps. For further information please contact the Click® Technical support team.
MO
DE®
F12
CLICK® WIRING ACCESSORIES
13A Wall Socket Outlets | Safety Shutter Socket Outlets Specialised Sockets | Round Pin Wall Socket Outlets
DP Switches
Switches
Dimmer Mounting Unfurnished Plates
CMA145PLCMA146PLCMA147PLCMA148PL
The dimmer modules are supplied separately to the plates listed above.
Standards: BS 5733 Back Box Depth: Dependent On Modules Fitted Dimensions: 1 Gang: 86mm (W) x 86mm (H) x 9.5mm (D) 2 Gang: 146mm (W) x 86mm (H) x 9.5mm (D)
All Mode® 13A sockets and fused connection units are tested and approved to BS1363 offering assured quality and safety.The provision of large twin earth terminals on our Two Gang sockets and fused connection units greatly facilitates wiring and installation.The Mode® range offers a solution for almost every possible design need and will enhance the décor of any area whether in a kitchen, bedroom, lounge or study etc...
CMA145PL
CMA147PL CMA148PL
CMA146PL
Power Socket Outlets, Fused Connection Units & Control Switches
Dimmer Modules
MD9001MD9010MD9022MD9042MD9014
SP900 MD9014MD9014Dimmer M10 Nut Runner
SP900 Dimmer M10 Nut Runner ToolUse the nut runner to easily exchange dimmer modules and create customised dimmer switch plate
MO
DE®
F15
MO
DE®
F14
CLICK® WIRING ACCESSORIES sales@scolmore.com | Call: 01827 63454 | scolmore.com
Power Socket Outlets
Unswitched Socket Outlets
CMA030 13A 1 Gang Unswitched Socket
Power Socket Outlets
Standards: BS 1363-2 Back Box Depth: 25mm Minimum Cable Size: 3 x 2.5mm² or 2 x 4mm² Dimensions: 1 Gang: 86mm (W) x 86mm (H) x 9.5mm (D) 2 Gang: 146mm (W) x 86mm (H) x 9.5mm (D)
CMA030 | CMA630
CMA037CMA036
CMA840CMA836
Standards: BS 1363-2 Back Box Depth: 25mm Minimum Cable Size: 3 x 2.5mm² or 2 x 4mm² Dimensions: 1 Gang: 86mm (W) x 86mm (H) x 9.5mm (D) 2 Gang: 146mm (W) x 86mm (H) x 9.5mm (D)
| CMA1037| CMA1036
| CMA1840
CMA035 | CMA635CMA1035 | CMA1635
| CMA1836
CMA1835
Switched Standard & 3 Pin Safety Shutter Socket OutletsStandard Safety Shutter
CMA035 CMA1035 13A 1 Gang DP Switched SocketCMA036 CMA1036 13A 2 Gang DP Switched Socket (Twin Earth)CMA037 CMA1037 13A 2 Gang DP Switched Clean Earth SocketCMA630 CMA1635 13A 1 Gang Socket (Twin Earth)CMA635 13A 1 Gang DP Switched Socket (Twin Earth)
CMA1835 13A 1 Gang DP Switched Socket With NeonCMA836 CMA1836 13A 2 Gang DP Switched Socket With Outboard Rockers (Twin Earth)CMA840 CMA1840 13A 2 Gang DP Switched Socket With Outboard Rockers & Neons (Twin Earth)
CMA032 13A 2 Gang Unswitched Socket (Twin Earth)
Power Socket OutletsSpecialised SocketsMedical Socket Outlets, Red & Green Outboard Rocker Sockets.
Blue Medical Socket Outlets (Medical Equipment Only)
CMA630BL 13A 1 Gang Socket (Twin Earth)CMA635BL 13A 1 Gang DP Switched Socket (Twin Earth)CMA632BL 13A 2 Gang Unswitched Socket (Twin Earth)CMA637BL 13A 2 Gang DP Switched Clean Earth Socket
Switched Socket Outlets (Coloured Rockers)
CMA836PWRD 13A 2 Gang DP Switched Socket With Outboard Red Rockers (Twin Earth)CMA836PWGR 13A 2 Gang DP Switched Socket With Outboard Green Rockers (Twin Earth)
CMA632BLCMA BL CMA637BL
CMA836PWGR CMA836PWRD
CMA630BL CMA635BL
MO
DE®
F17
MO
DE®
F16
CLICK® WIRING ACCESSORIES sales@scolmore.com | Call: 01827 63454 | scolmore.com
Switched Sockets With USB Outlets
CMA771U 13A 1 Gang Switched Socket With 2.1A USB Outlet (Twin Earth)CMA770 13A 2 Gang Switched Socket With 2.1A USB Outlet (Twin Earth)CMA780 13A 2 Gang Switched Socket With Twin 2.1A USB Outlets (4.2A) (Twin Earth)CMA786 13A 2 Gang Switched Safety Shutter Socket Outlet With Type A & C USB (4.2A) Outlets (Twin Earth)
Power Socket Outlets
Locating Plug Sockets
CMA735 13A 1 Gang DP Switched Locating Plug SocketCMA736 13A 2 Gang DP Switched Locating Plug Socket With Outboard Rockers (Twin Earth)
Power Socket Outlets
Standards: BS 1363-2 770, 780, 771U 786: BS EN IEC 62368-1 BS EN 62680-1-1 Back Box Depth: 25mm Minimum Cable Size: 3 x 2.5mm² or 2 x 4mm² Dimensions: 1 Gang: 86mm (W) x 86mm (H) x 9.5mm (D) 2 Gang: 146mm (W) x 86mm (H) x 9.5mm (D)
CMA735
CMA736
CMA771U
CMA770
CMA771UCMA735
Non-Standard Socket Outlets
CMA935 13A 1 Gang DP Switched Non-Standard SocketCMA936 13A 2 Gang DP Switched Non-Standard Socket
(Twin Earth)
Non-Standard Resilient Plug Tops (BS1363/A)
PA380WH 13A Fused Non-Standard Plug - WhitePA380RD 13A Fused Non-Standard Plug - Red
For use with non-standard Click® Mode sockets CMA935 and CMA936
Round Pin Socket Outlets
CMA034 15A Switched Round Pin SocketCMA038 5A Round Pin SocketCMA039 2A Round Pin Socket
Standards: Round Pin: BS 546 Non Standard: BS 1363-2 675: BS EN 60669-1 BS 1363-2 380: BS 1363/A BS 1362 Back Box Depth: 25mm Minimum 675: 35mm Minimum Cable Size: 034: 3 x 2.5mm² 038: 4 x 1.5mm² or 3 x 2.5mm² 039: 3 x 1.5mm² 675 935 936: 3 x 2.5mm² or 2 x 4mm² 380: 1.5mm² Dimensions: 1 Gang: 86mm (W) x 86mm (H) x 9.5mm (D) 2 Gang: 146mm (W) x 86mm (H) x 9.5mm (D)
380: 49.5mm (W) x 21mm (D) x 49.5mm (H)
CMA034 CMA039
CMA935Non-standard socket
PA380WHNon-standard plug
CMA936Non-standard socket
CMA038
CMA780CMA780CMA675
Lockable Socket
CMA675 13A 1G DP Key Lockable Socket With Neon (Twin Earth)
CMA786CMA786
MO
DE®
F19
MO
DE®
F18
CLICK® WIRING ACCESSORIES sales@scolmore.com | Call: 01827 63454 | scolmore.com
20A DP Sink/Bath Switch
CMA024 20A DP Sink/Bath Switch With Neon3 pole and 20A DP switches are non-modular
20A Keyfob Switch
CMA620 20A Keyfob SwitchSP940 Spare Keyfob For CMA620
Fan Isolation Switch
CMA020CMA021
Control Switches
Fused Connection Units Without Flex Outlet
CMA649 3A Fused Connection UnitCMA650 13A Fused Connection UnitCMA651 13A Switched Fused Connection UnitCMA652 13A Switched Fused Connection Unit
With NeonCMA653 13A Fused Connection Unit With Neon
Fused Connection Units With Optional Flex Outlet Through The BottomCMA049 3A Fused Connection UnitCMA050 13A Fused Connection UnitCMA051 13A Switched Fused Connection UnitCMA052 13A Switched Fused Connection Unit
With NeonCMA053 13A Fused Connection Unit With Neon
13A Fused Connection Units
Standards: BS EN 60669-1 3020: BS 5733 BS 1362 Back Box Depth: 25mm Minimum 020 021: 16mm Minimum Cable Size: 4 x 1.5mm² or 2 x 2.5mm² 024 620: 3 x 2.5mm² Dimensions: 1 Gang: 86mm (W) x 86mm (H) x 9.5mm (D) SP690: 80mm (W) x 35mm (H) x 4mm (D)
Standards: BS 1363-4 BS 1362 Back Box Depth: 25mm Minimum Cable Size: 3 x 2.5mm² or 2 x 4mm² Dimensions: 86mm (W) x 86mm (H) x 9.5mm (D)
CMA649 | CMA650
CMA652
CMA051
CMA052
CMA651 CMA653
CMA049 | CMA050
CMA053
CMA020
CMA024
CMA021
CMA620
Fan Isolation Switch With Fuse
CMA3020 3A Fused 3 Pole Control Switch
CMA3020
MO
DE®
F21
MO
DE®
F20
CLICK® WIRING ACCESSORIES sales@scolmore.com | Call: 01827 63454 | scolmore.com
45A Switches
CMA200 45A 1 Gang DP SwitchCMA201 45A 1 Gang DP Switch With NeonCMA202 45A 2 Gang DP SwitchCMA203 45A 2 Gang DP Switch With Neon
Cooker Control Units
CMA204 45A 2 Gang DP Switch With 13A DP Switched SocketCMA205 45A 2 Gang DP Switch With 13A DP Switched Socket & Neons
Control Switches
20A Control Switch Without Flex Outlet
CMA622 20A DP SwitchCMA623 20A DP Switch With NeonCMA040 20A DP ‘Water Heater’ SwitchCMA042 20A DP ‘Water Heater’ Switch With Neon
20A Control Switches With Optional Flex Outlet Through The BottomCMA022 20A DP SwitchCMA023 20A DP Switch With NeonCMA044CMA046
& Neon
Control Switches
Standards: BS EN 60669-1 204 205: BS 4177 Back Box Depth: 35mm Minimum Cable Size: 1 x 16mm² Dimensions: 1 Gang: 86mm (W) x 86mm (H) x 9.5mm (D) 2 Gang: 146mm (W) x 86mm (H) x 9.5mm (D)
Standards: BS EN 60669-1 Back Box Depth: 25mm Minimum 660: 35mm Minimum Cable Size: 3 x 2.5mm² 660: 3 x 2.5mm² or 2 x 4mm² Dimensions: 86mm (W) x 86mm (H) x 9.5mm (D)
CMA022
CMA046
CMA623
CMA023
CMA040
CMA044
CMA622
CMA042
CMA200
CMA204
CMA201
CMA202
CMA205 CMA203
Lockable Switch
CMA660 20A Double Pole Key Lockable Switch
CMA660
MO
DE®
F23
MO
DE®
F22
CLICK® WIRING ACCESSORIES sales@scolmore.com | Call: 01827 63454 | scolmore.com
Pull Cord Switches
PRC009 10AX 2 Way Ceiling Pull Cord SwitchPRC210 10AX 2 Way Pull Cord SwitchPRC216 16A DP Pull Cord Switch With Neon
Pull Cord Switches
PRW208PRW210 45A DP Pull Cord Switch With Mechanical ‘On/Off’ & NeonPRW211 50A DP Pull Cord Switch With Mechanical ‘On/Off’ & NeonPRW213 50A DP Round Pull Cord Switch With Mechanical ‘On/Off’, Neon & PattressCMA213 50A DP Round Pull Cord Switch With Mechanical ‘On/Off’, Neon & Pattress
Ceiling Accessories
45A Switches - White Rockers
CMA500 45A 1 Gang DP Switch With White RockerCMA501 45A 1 Gang DP Switch With White Rocker & NeonCMA502 45A 2 Gang DP Switch With White RockerCMA503 45A 2 Gang DP Switch With White Rocker & Neon
Cooker Control Units - White Switches
CMA504 45A 2 Gang DP Switch With 13A DP Switched Socket & White RockersCMA505 45A 2 Gang DP Switch With 13A DP Switched Socket, White Rockers & Neons
Control Switches
Standards: BS EN 60669-1 Back Box Depth: 009 PRC210 213 216: Supplied 208: 25mm Minimum PRW210: 35mm Minimum 211: 47mm Cable Size: 009 208 PRC210 216: 2 x 1.5mm² or 1 x 2.5mm² 211 213: 1 x 25mm² PRW210: 1 x 6mm² Dimensions: 009: 76mm Diameter x 51.5mm 208 PRW210 211: 86mm (W) x 86mm (H) x 43mm (D)
PRC210 216: 70mm (Dia) x 42mm (D) PRW213: 100mm (Dia) x 77mm (D) CMA213: 100mm (Dia) x 77mm (D)
Standards: BS EN 60669-1 504 505: BS 4177 Back Box Depth: 35mm Minimum Cable Size: 1 x 16mm² Dimensions: 1 Gang: 86mm (W) x 86mm (H) x 9.5mm (D) 2 Gang: 146mm (W) x 86mm (H) x 9.5mm (D)
Decorative covers available for PRC210/216, see Essentials™ page M30.
CMA500
CMA504
CMA501
CMA502
CMA505 CMA503PRC210
PRW208 PRW210 PRW211
PRW213 PRC216PRW213 PRC216PRC210
PRC009CMA213
MO
DE®
F24
CLICK® WIRING ACCESSORIES
Flex Outlet Plates
CMA017UK Design Registration No. 3015175
45A Cooker Connection PlatesCMA215 45A 1 Gang Cooker Connection Plate
UK Design Registration No. 3015175
45A Cooker Outlet PlatesPRW217 45A Easyfit Dual Appliance Outlet Plate
Pattress Box for PRW217 - Urea
PRW218
Dual Voltage Shaver SocketCMA100 115/230V Dual Voltage Shaver Socket
Blank PlatesCMA060 1 Gang Blank PlateCMA061 2 Gang Blank Plate
Standards: BS 5733 100: BS EN IEC 61558-1 BS EN 61558-2-5 Back Box Depth: 017 060: 16mm Minimum 100: 47mm 215: 35mm Minimum 061 217: 25mm Minimum Cable Size: 100: 2 x 1.5mm² or 1 x 2.5mm² 017: 3 x 2.5mm² or 2 x 4mm² 215: 2 x 10mm² 217: 1 x 10mm² Dimensions: 1 Gang: 86mm (W) x 86mm (H) x 9.5mm (D) 2 Gang: 146mm (W) x 86mm (H) x 9.5mm (D)
215: 86mm (W) x 86mm (H) x 22.5mm (D) 217: 85mm (W) x 130mm (H) x 27mm (D) 218: 85mm (W) x 130mm (H) x 37.5mm (D) 100: 86mm (W) x 146mm (H) x 9.5mm (D)
CMA100
RJ11 Outlet | UK Telephone Outlets
Providing the means to facilitate the connection of modern communications equipment is as important today as it is to provide the electrical power to operate them.
This section of the catalogue is devoted to the New Media™ range of plate accessories which includes products for connecting telephone, computer, television and satellite devices.
Click® dual voltage shaver outlets incorporate a double wound isolating transformer rated 20Va at 230V or 115V and meets BS EN 61558-2-5:2010 making it safe for use in bathrooms. Shaver outlet is not continuously rated and therefore not suitable for use as a permanent charging outlet.
TV, Telephone & Data Sockets
CMA215
PRW217
CMA060
MO
DE®
F27
MO
DE®
F26
CLICK® WIRING ACCESSORIES sales@scolmore.com | Call: 01827 63454 | scolmore.com
Satellite Outlets (Unshielded)
CMA156 Non-isolated Single Satellite OutletCMA157CMA170 Non-isolated Satellite & Non-isolated
Isolated Coaxial Outlets (Unshielded)
CMA158CMA159
interference, if a 2 way signal is required, i.e. for use with satellite hard wire extensions, then a non- isolated outlet is required.
Non-isolated Coaxial Outlets (Unshielded)
CMA065CMA066
TV & Satellite
Telephone Outlets
CMA119 Single Telephone Outlet - MasterCMA122 Twin Telephone Outlet - MasterCMA124 Single Telephone Outlet - SecondaryCMA127 Twin Telephone Outlet - Secondary
Twin outlets are 2 separate sockets and not internally linked together.
RJ11 Telephone Outlet
CMA115
RJ45 Data Outlets
CMA131 Single RJ45 Cat-5e OutletCMA132 Twin RJ45 Cat-5e Outlet
Telephone Outlets
Back Box Depth: 16mm Minimum Dimensions: 86mm (W) x 86mm (H) x 9.5mm (D)
Back Box Depth: 16mm Minimum 115: 35mm Minimum Termination Type: IDC 115: Screw Dimensions: 86mm (W) x 86mm (H) x 9.5mm (D)
CMA115 | CMA131 CMA132
CMA119 | CMA124CMA122 | CMA127
CMA066CMA065
CMA170
CMA159CMA158
CMA157CMA156
MO
DE®
F29
MO
DE®
F28
CLICK® WIRING ACCESSORIES sales@scolmore.com | Call: 01827 63454 | scolmore.com
Architrave Pattress Boxes
CMA175Earth Terminal
CMA176Earth Terminal
For Mode® products only
PVC Pattress Boxes
CMA230CMA235CMA240CMA245
Moulded Pattress Boxes
CMA080Earth Terminal
CMA081CMA082CMA083CMA084CMA085
Earth TerminalCMA086
With Cable Restraint & Earth TerminalCMA089 Dual Accessory 29mm Deep Pattress
Converter Pattress Box
CMA091 1 Gang To 2 Gang 16mm Deep Converter Pattress
Unfurnished Plates - New Media™
CMA310 1 Gang New Media™ Unfurnished Plate - 1 ApertureCMA311 1 Gang New Media™ Unfurnished Plate - 2 AperturesCMA312 2 Gang New Media™ Unfurnished Plate - 4 Apertures
Unfurnished Plates
Standards: BS 5733 Back Box Depth: Dependent On Modules Fitted Dimensions: 1 Gang: 86mm (W) x 86mm (H) x 9.5mm (D) 2 Gang: 146mm (W) x 86mm (H) x 9.5mm (D)
CMA310
CMA311
CMA312
Selecting from a range of module inserts covering all manner of media transfer, the
arrangement of TV, radio or satellite reception, plus speaker, telephone and data outlets. All modules can be inserted into single or double
All New MediaTM plates are suitable for use with standard euro module inserts.
MM501BKMM410BK MM405WH MM440BK
CMA080 CMA083
CMA091CMA175 CMA176
CMA082
CMA089CMA084
For a complete range of New Media™ modules please see our dedicated New Media™ section. M4.
MM501BKMM410BK MM405WH MM440BK
MO
DE®
F31
MO
DE®
F30
CLICK® WIRING ACCESSORIES sales@scolmore.com | Call: 01827 63454 | scolmore.com
WA106P
WA095
WA107P
WA102
™ page M4.
Galvanised Steel Back Boxes
WA092WA093WA094WA095WA096WA097WA098
WA099WA102
WA671WA672
Dry Lining Boxes
WA087PWA088PWA106PWA107PWA108P
‘Ezylink’ Dry Lining Box Connector
GA100
GA100
FlameGuard® Dry Lining Boxes
WA4135 1 Gang 35mm Deep FlameGuard®
WA4235 2 Gang 35mm Deep FlameGuard®
WA4147 1 Gang 47mm Deep FlameGuard®
WA4247 2 Gang 47mm Deep FlameGuard®
For the complete range of FlameGuard® ™ page M8.
Standards: BS 4662 BS EN 1364-1 BS EN ISO 10140-2 Cutout sizes: 1 Gang: 73mm (W) x 73mm (H) 2 Gang: 132mm (W) x 73mm (H) Dimensions: 1 Gang: 82mm (W) x 82mm (H) x 35mm (D) 2 Gang: 142mm (W) x 82mm (H) x 47mm (D)
WA4135
WA4247
WA4147
WA4235
FlameGuard®
Fire: BS EN 1364-1 Acoustic: BS EN ISO 140-2. Complies with Building Regulations Fire tested up to 90 minutes with the cabability of the boxes being mounted back to back.