Transcript of Emissions and Energy Reporting System How to report the importation or production of Liquid...
- Slide 1
- Slide 2
- Emissions and Energy Reporting System How to report the
importation or production of Liquid Petroleum Gas (LPG)/Liquid
Natural Gas (LNG) for non-transport use This presentation works
best if you are able to use audio on your computer. Some events are
timed to coincide with the audio track. This presentation works
best if you are able to use audio on your computer. Some events are
timed to coincide with the audio track.
- Slide 3
- How to use this presentation Follow the audio and on screen
instructions to work your way through this presentation. At the top
of each screen, you will see a button which displays the menu that
will link to other screens. Some screens will feature a highlighted
area which you will click in order to perform certain functions.
Others will have a button located in the dialog box. You can exit
this presentation at any time by pressing the Esc key on your
computer. Press the Esc key on your keyboard to end this
presentation Press the Esc key to end this presentation Menu
Welcome Introduction Conclusion Contact us Close menu Reporting
LPG/LNG Exemptions
- Slide 4
- Welcome Welcome to this series of interactive presentations on
using the Emissions and Energy Reporting System (EERS). At the end
of this presentation you will know how to report the Provisional
Emissions Number (PEN) for the importation and/or production of
LPG/LNG in EERS. Please click on the button below to proceed. Press
the Esc key on your keyboard to end this presentation Click here to
learn how to use this presentation Click here to read the
disclaimer Press the Esc key to end this presentation Menu Welcome
Introduction Conclusion Contact us Close menu Reporting LPG/LNG
Exemptions
- Slide 5
- Introduction A person is required to report the importation or
production of LPG/LNG for non-transport use as outlined in sections
36B and 36C of the Clean Energy Act 2011. You will have a PEN in
relation to the importation or production of LPG/LNG for
non-transport use if: an amount of LPG/LNG was imported or
produced; and the amount was entered for home consumption; and
customs duty on that amount was payable by you but was remitted on
the grounds that the LPG/LNG was not used, or intended for use, in
an internal combustion engine in either a motor vehicle or a
vessel. Please click on the button below to proceed. Press the Esc
key on your keyboard to end this presentation Press the Esc key to
end this presentation Menu Welcome Introduction Conclusion Contact
us Close menu Reporting LPG/LNG Exemptions
- Slide 6
- Exemptions and netting out If the LPG is packaged in a
non-refillable 1kg or smaller container, then the container does
not need to indicate the gas is for use as a refrigerant or for
combustion. LPG does not need to be reported if the LPG packaged in
a container that holds no more than 10kg that: indicates the gas is
for use as a refrigerant, and does not indicate the gas is for
combustion, or is supplied to a person who provides a statutory
declaration stating it is for packaging in one of those ways.
Netting out is available to an importer or producer of LPG/LNG
where: it supplies an Obligation Transfer Number (OTN) holder who
quotes their OTN, or it uses the LPG/LNG as a feedstock, or it uses
the LPG/LNG in such a way as to not emit any greenhouse gases, or
the emissions from the non-transport combustion of the LPG/LNG
count under the direct emitter provisions of the Clean Energy Act.
Please click on the button below to proceed. Press the Esc key on
your keyboard to end this presentation Press the Esc key to end
this presentation Menu Welcome Introduction Conclusion Contact us
Close menu Reporting LPG/LNG Exemptions
- Slide 7
- The EERS home page Once you have logged into EERS, you will see
your home page. Your home page provides the entry point to the
reporting pages. Click on the highlighted 2013-2014 button to enter
the reporting page for the current reporting period. The EERS home
page Once you have logged into EERS, you will see your home page.
Your home page provides the entry point to the reporting pages.
Click on the highlighted 2013-2014 button to enter the reporting
page for the current reporting period. Menu Welcome Introduction
Conclusion Contact us Close menu Reporting LPG/LNG Exemptions
- Slide 8
- The Reporting Entity Information page Next, you will see the
Reporting Entity Information page. This is where you will maintain
your corporate structure and enter data relating to your emissions
and energy consumption and production. Click on the highlighted
Embodied Emissions button to enter the embodied emissions page. The
Reporting Entity Information page Next, you will see the Reporting
Entity Information page. This is where you will maintain your
corporate structure and enter data relating to your emissions and
energy consumption and production. Click on the highlighted
Embodied Emissions button to enter the embodied emissions page.
Menu Welcome Introduction Conclusion Contact us Close menu
Reporting LPG/LNG Exemptions
- Slide 9
- The embodied emissions page The Embodied emissions Gaseous
fuels, liquid fuels and Opt-In page summarises entered data
relating to sections 35B, 36B,36C,36D,36E and 92A of the Clean
Energy Act. It also links to the data entry pages. To enter data
for LPG/LNG under section 36B of the Clean Energy Act, click on the
highlighted View or Modify link. The embodied emissions page The
Embodied emissions Gaseous fuels, liquid fuels and Opt-In page
summarises entered data relating to sections 35B, 36B,36C,36D,36E
and 92A of the Clean Energy Act. It also links to the data entry
pages. To enter data for LPG/LNG under section 36B of the Clean
Energy Act, click on the highlighted View or Modify link. Menu
Welcome Introduction Conclusion Contact us Close menu Reporting
LPG/LNG Exemptions
- Slide 10
- The Add/modify entry page You will be required to select
options or enter data relating to fuel type, method, criteria for
measurement quantity and unit of consumption. To commence data
entry, click on the Fuel Type drop-down menu (highlighted). The
Add/modify entry page You will be required to select options or
enter data relating to fuel type, method, criteria for measurement
quantity and unit of consumption. To commence data entry, click on
the Fuel Type drop-down menu (highlighted). Menu Welcome
Introduction Conclusion Contact us Close menu Reporting LPG/LNG
Exemptions
- Slide 11
- The Add/modify entry page In this example we will be reporting
the importation or production of LPG. The following steps could
also be used for reporting LNG. Select Liquid petroleum gas in the
Fuel Type drop-down menu (highlighted). The Add/modify entry page
In this example we will be reporting the importation or production
of LPG. The following steps could also be used for reporting LNG.
Select Liquid petroleum gas in the Fuel Type drop-down menu
(highlighted). Menu Welcome Introduction Conclusion Contact us
Close menu Reporting LPG/LNG Exemptions
- Slide 12
- The Add/modify entry page You can select either Default or
Prescribed alternative for the method. In this example, Default
will be used. Select Default in the Method drop-down menu
(highlighted). The Add/modify entry page You can select either
Default or Prescribed alternative for the method. In this example,
Default will be used. Select Default in the Method drop-down menu
(highlighted). Menu Welcome Introduction Conclusion Contact us
Close menu Reporting LPG/LNG Exemptions
- Slide 13
- The Add/modify entry page You can choose to base your reporting
on records associated with the appropriate sections of the Excise
or Customs Acts of 1901 or invoices provided by a supplier. In this
example, invoices will be used. Select Invoices provided by
Supplier in the Criteria for Measurement drop-down menu
(highlighted). The Add/modify entry page You can choose to base
your reporting on records associated with the appropriate sections
of the Excise or Customs Acts of 1901 or invoices provided by a
supplier. In this example, invoices will be used. Select Invoices
provided by Supplier in the Criteria for Measurement drop-down menu
(highlighted). Menu Welcome Introduction Conclusion Contact us
Close menu Reporting LPG/LNG Exemptions
- Slide 14
- The Add/modify entry page Next you will be required to enter
the amount of liquid petroleum gas in the Quantity field. Since we
are reporting using the default method, the amount must be in
kilolitres. The remaining fields are greyed out meaning the default
values are used. Once data entry is complete, click on the Save
button (highlighted). The Add/modify entry page Next you will be
required to enter the amount of liquid petroleum gas in the
Quantity field. Since we are reporting using the default method,
the amount must be in kilolitres. The remaining fields are greyed
out meaning the default values are used. Once data entry is
complete, click on the Save button (highlighted). Menu Welcome
Introduction Conclusion Contact us Close menu Reporting LPG/LNG
Exemptions
- Slide 15
- The LPG/LNG summary page The data you entered on the previous
page will be displayed on the LPG/LNG imported for non transport
use summary page. This page will also display the PEN relating to
the reported data. You can modify or remove the data by clicking on
the links under the Actions heading. The LPG/LNG summary page The
data you entered on the previous page will be displayed on the
LPG/LNG imported for non transport use summary page. This page will
also display the PEN relating to the reported data. You can modify
or remove the data by clicking on the links under the Actions
heading. Click here to continue Menu Welcome Introduction
Conclusion Contact us Close menu Reporting LPG/LNG Exemptions
- Slide 16
- The LPG/LNG summary page In certain circumstances, you may be
able to net out some or all of your previously entered data.
Netting out allows you to reduce your PEN associated with your
previously reported LPG To net out some or all of your reported
LPG, click on the Add netting out of LPG or LNG under Section 36B
link (highlighted) The LPG/LNG summary page In certain
circumstances, you may be able to net out some or all of your
previously entered data. Netting out allows you to reduce your PEN
associated with your previously reported LPG To net out some or all
of your reported LPG, click on the Add netting out of LPG or LNG
under Section 36B link (highlighted) Menu Welcome Introduction
Conclusion Contact us Close menu Reporting LPG/LNG Exemptions
- Slide 17
- The Add/modify entry page Since we previously entered the
importation or production of liquid petroleum gas then we will
select the same for the fuel type. The following steps could also
be used for netting out associated with LNG. Select Liquid
petroleum gas in the Fuel Type drop-down menu (highlighted). The
Add/modify entry page Since we previously entered the importation
or production of liquid petroleum gas then we will select the same
for the fuel type. The following steps could also be used for
netting out associated with LNG. Select Liquid petroleum gas in the
Fuel Type drop-down menu (highlighted). Menu Welcome Introduction
Conclusion Contact us Close menu Reporting LPG/LNG Exemptions
- Slide 18
- The Add/modify entry page In this example we are netting out an
amount of LPG that has been used as feedstock. See section 36B of
the Clean Energy Act for netting out provisions. Select Subsection
36B(4) Reg. 3.5G(2)(c)(i) Feedstock in the Subsection drop-down
menu (highlighted). The Add/modify entry page In this example we
are netting out an amount of LPG that has been used as feedstock.
See section 36B of the Clean Energy Act for netting out provisions.
Select Subsection 36B(4) Reg. 3.5G(2)(c)(i) Feedstock in the
Subsection drop-down menu (highlighted). Menu Welcome Introduction
Conclusion Contact us Close menu Reporting LPG/LNG Exemptions
- Slide 19
- The Add/modify entry page Since we are not netting out under an
OTN, the next three fields are greyed out. The next field requiring
entry is Method. In this example we will report using the default
method. Select Default in the Method drop-down menu (highlighted).
The Add/modify entry page Since we are not netting out under an
OTN, the next three fields are greyed out. The next field requiring
entry is Method. In this example we will report using the default
method. Select Default in the Method drop-down menu (highlighted).
Menu Welcome Introduction Conclusion Contact us Close menu
Reporting LPG/LNG Exemptions
- Slide 20
- The Add/modify entry page You can choose to net out based on
records associated with the appropriate sections of the Excise or
Customs Acts of 1901 or invoices provided by a supplier. In this
example, invoices will be used. Select Invoices provided by
Supplier in the Criteria for Measurement drop-down menu
(highlighted). The Add/modify entry page You can choose to net out
based on records associated with the appropriate sections of the
Excise or Customs Acts of 1901 or invoices provided by a supplier.
In this example, invoices will be used. Select Invoices provided by
Supplier in the Criteria for Measurement drop-down menu
(highlighted). Menu Welcome Introduction Conclusion Contact us
Close menu Reporting LPG/LNG Exemptions
- Slide 21
- The Add/modify entry page Next you will be required to enter
the amount of liquid petroleum gas netted out in the Quantity
field. Since we are netting out using the default method, the
amount must be in kilolitres. The remaining fields are greyed out
meaning the default values will be used. Once data entry is
complete, click on the Save button (highlighted). The Add/modify
entry page Next you will be required to enter the amount of liquid
petroleum gas netted out in the Quantity field. Since we are
netting out using the default method, the amount must be in
kilolitres. The remaining fields are greyed out meaning the default
values will be used. Once data entry is complete, click on the Save
button (highlighted). Menu Welcome Introduction Conclusion Contact
us Close menu Reporting LPG/LNG Exemptions
- Slide 22
- The LPG/LNG summary page The data you entered on the previous
page will be displayed in the netting out section on the LPG/LNG
imported for non transport use summary page. This page will also
display the updated PEN. You can modify or remove the data by
clicking on the links under the Actions heading. The LPG/LNG
summary page The data you entered on the previous page will be
displayed in the netting out section on the LPG/LNG imported for
non transport use summary page. This page will also display the
updated PEN. You can modify or remove the data by clicking on the
links under the Actions heading. Click here to continue Menu
Welcome Introduction Conclusion Contact us Close menu Reporting
LPG/LNG Exemptions
- Slide 23
- The embodied emissions page The PEN associated with the LPG
data entered on the previous pages will be summarised on the
embodied emissions page. You can click on the View or Modify link
if you wish to change the data. Click on the Back to Reporting
Entity Information link (highlighted) to return to the reporting
entity page. The embodied emissions page The PEN associated with
the LPG data entered on the previous pages will be summarised on
the embodied emissions page. You can click on the View or Modify
link if you wish to change the data. Click on the Back to Reporting
Entity Information link (highlighted) to return to the reporting
entity page. Menu Welcome Introduction Conclusion Contact us Close
menu Reporting LPG/LNG Exemptions
- Slide 24
- The Reporting Entity Information page Once you have completed
entering data relating to embodied emissions, you can complete you
other reporting requirements by selecting the appropriate entity
from the corporate structure. The Reporting Entity Information page
Once you have completed entering data relating to embodied
emissions, you can complete you other reporting requirements by
selecting the appropriate entity from the corporate structure.
Click here to continue Menu Welcome Introduction Conclusion Contact
us Close menu Reporting LPG/LNG Exemptions
- Slide 25
- Conclusion In this module, we have shown you how to enter a PEN
for the importation and/or production of LPG/LNG for non transport
use. If you require further information regarding reporting,
additional material is available from the Clean Energy Regulators
website. For additional assistance, contact the Clean Energy
Regulator using the details on the following page. Press the Esc
key on your keyboard to end this presentation Press the Esc key to
end this presentation Menu Welcome Introduction Conclusion Contact
us Close menu Reporting LPG/LNG Exemptions
- Slide 26
- Contact the Clean Energy Regulator By phone on 1300 553 542 By
email at reporting@cleanenergyregulator.gov.au On the web at
www.cleanenergyregulator.gov.au Press the Esc key on your keyboard
to end this presentation Press the Esc key to end this presentation
Menu Welcome Introduction Conclusion Contact us Close menu
Reporting LPG/LNG Exemptions
- Slide 27
- Disclaimer This presentation has been developed by the Clean
Energy Regulator to assist persons to comply with their reporting
obligations under the National Greenhouse and Energy Reporting Act
2007. This presentation should be viewed in conjunction with the
National Greenhouse and Energy Reporting Act 2007, the Clean Energy
Act 2011 (where applicable) and their supporting Regulations and
Determinations. Changes to legislation may affect the information
in this presentation. The examples used in this presentation are
for illustrative purposes only, this presentation is not intended
to provide legal advice. If persons have concerns or questions
about the application of legislation in their particular
circumstances, they should seek professional advice. Press the Esc
key on your keyboard to end this presentation Press the Esc key to
end this presentation Menu Welcome Introduction Conclusion Contact
us Close menu Reporting LPG/LNG Exemptions