Post on 19-Jan-2016
EmbeddedDVRUserManual
1/90
1. PRECAUTIONS
Pleaseobservethefollowingprecautions,inordertoavoiddamageorlossofdatacausedbyimproperoperation.
DVRshouldworkonpropertemperatureandhumidity.
DonotinstallDVRinhumid,dustyorsmokyenvironment.
Requireasolidmountingsurfaceforinstallation.
Donotblockanyventilationopenings.Installunderthemanufacturer'sinstructions.
Donotspillliquidofanykindondevice.
Donotputanyotherequipmentondevice.
Donotdismantlethedevice.
SelectspecifiedHDDbymanufacture.
2/90
2. NOTE
Thisusermanualisforreferenceonly,subjecttoavailableproducts.
Thisusermanualmaycontaininaccuratedataorprintingerror.
Updatestothemanualorproductsthemselveswilloccurwithoutfurthernotification.
Allpicturesnotfromthesamemachine,showingillustrativepurposesonly.
Contactthecustomerservicedepartmentwhenyouhaveanyquestionorwantnewestsoftwareandfile.
3/90
Content
1. PRECAUTIONS...................................................................................................................................... 1
2. NOTE ................................................................................................................................................... 2
3. PRODUCT INTRODUCTION.................................................................................................................... 5
3.1. SUMMARY ............................................................................................................................. 5
3.2. FEATURES .............................................................................................................................. 5
3.3. INSTALLATION ....................................................................................................................... 6
3.4. PANEL INTRODUCTION .......................................................................................................... 7
3.5. MOUSE .................................................................................................................................11
3.6. INPUT METHOD ....................................................................................................................12
3.7. POWER ON/OFF....................................................................................................................13
3.8. ICON.....................................................................................................................................15
3.9. LIVE VIEW .............................................................................................................................16
4.1 RIGHT BUTTON MANU ......................................................................................................................17
4.2 MAIN MENU INTRODUCTION................................................................................................21
4.3 SEARCH.................................................................................................................................22
4.4 CONFIGURATION ..................................................................................................................24
4.5 STORAGE ..............................................................................................................................42
4.6 OUTPUT................................................................................................................................47
4.7 MAINTAIN.............................................................................................................................54
4.8 SHUTDOWN..........................................................................................................................58
5 WEB&CLIENT ......................................................................................................................................59
5.1 WEB OPERATION ..................................................................................................................59
5.2 CLIENT OPERATION...............................................................................................................68
6 FUNCTION...........................................................................................................................................69
6.1 DDNS Function......................................................................................................................69
6.2 Port mapping........................................................................................................................72
6.3 NTP function.........................................................................................................................74
4/90
6.4 PTZ .......................................................................................................................................75
6.5 Voice Intercom .....................................................................................................................79
6.6 HDD redundancy...................................................................................................................80
6.7 HDD S.M.A.R.T......................................................................................................................80
7 APPENDIX ...........................................................................................................................................83
7.1 TERMS ..................................................................................................................................83
7.2 HDD CAPACITY CALCULATION ...............................................................................................84
7.3 Common Faults.....................................................................................................................87
5/90
3. PRODUCTINTRODUCTION
3.1. SUMMARY
OurEmbeddedDigitalVideoRecorderisanexcellentdigitalsurveillanceproductwhichadoptsH.264videocompression,harddiskrecording,TCP/IPtransmission,andaLinuxbasedOSinadditiontosomeofthemoreadvancedtechnologiesintheinformationtechnologyindustry.Thisenablesamorestable,reliableandhighpicturequality.
Theseproductssupportsynchronizedvideoandaudiorecording,playback,andmonitoring.Thisseriesalsosupportsnetworkbasedsystemcontrol,aswellasexcellentnetworkstreamingcapabilities.
3.2. FEATURES
LIVEVIEW
CVBSinterface,TV,VGA/HDMIsynchronousoutput.
COMPRESSION
H.264videocompression,G.711audiocompression,supportsD125fpsresolution.
RECORDING
Recordingmodesincludemanual,time,alarm,motiondetection,etc.;SupportSATAHDDandlocaldiskS.M.A.R.T.technology,SupportUSBbackupandinternetbackup.
PLAYBACK
Playbacksearchbyvariousconditions,localandnetworkplayback;supportmultiplechannelsimultaneousplayback,supportfast,slow,rewindandframemode;supportexacttimeplayback.
CMERACONTROLANDALRM
Remotecameracontrol,Multi-channelalarminputinterfaceforconnectingvarioustypesalarmequipment;Motiondetectionalarm,videolossalarm,maskingalarm;Multi-channelalarmoutput,alarmlinkageandon-sitelightingcontrol.
COMMUNICATIONINTERFACE
USB2.0highspeedinterfaceconnectingvariousbackupdevices;StandardEthernetinterface,workundervariousnetworks.
6/90
NETWORKPROTOCAL
SupportTCP/IP,UDP,RTP/RTSP,DHCP,PPPoE,DDNS,NTPetc.;supportnetworkreal-timeliveview,recording,playback,control;built-inWEBServer,IEbrowserfordirectaccess.
OPERATIONMODE
Supportthefrontpanel,remotecontrols,mouseandsoonmanykindsofoperatingmode;Withsimple,intuitivegraphical;Withsimple,intuitivegraphicalinterface.
3.3. INSTALLATION
3.3.1. CHECKDVRANDACCESSORIES
Pleasecarefullycheckthecontentsaspackinglist.Ifanyoftheitemsaremissing,pleasecontactwithyourdealer.
3.3.2. HDDINSTALLATION
Preparation
PrepareaCrossScrewdriver.
Note:HDDquantitybyeachmodel’sspecificationsshallbefinal,HDDcapacityupto64TB.
Steps
Removethemetaltopcoverbyremovingtwoscrewsfromthesidesofthecover.
Placetheharddisksonaflattableandfastenitbyscrews.
ConnectthepoweranddatacablestotheHDD.
Reinstallthemetaltopcoverandfastenitbyscrews.
Caution
OnlyuseHDDspecifiedbythemanufacturer.
HDDwillbeformattedautomaticallyduringstartup,itmaycausedataloss.
RecordingdurationisdecidedbyHDDcapabilityandDVRparameters(recordingsetup,encodingsetup).Pleaseseetheforminchapter7.2.
3.3.3. WIRINGINSTALLATION
7/90
Preparingforinstallation
Camera,displayer,AVcable,cable,mouse,otherkindscables.
InstallationSteps
DVRinahorizontalposition,connectcameratovideoinputinterfaceinbackpanel.
Connectvideooutputtothedisplayer.
ConnectcabletoRJ45interfacewhenaccessnetwork.
MouseshouldbeUSBinterfacetype,frontorbackpanelUSBinterfacebothwork.
Powersupply.
Caution
ForanexternalalarmdeviceorPTZ,pleaserefertotherelevantinstructions.
DVRpowerlinesshouldbeunderalllinesconnectedcorrectly.
Notethepowerparameterswhenaccesstoavarietyofpower.
3.4. PANELINTRODUCTION
3.4.1. FRONTPANEL
FrontPanel:
Frontpanel:
Index Name Function
1 Power switch Receiveremotecontrolsignal;
2 USB interface Connect USB devices such as U drive
8/90
3Remote control
receiverReceive remote control signals
4
Power/RUN/REC/
NET/ALARM
LED
Light for power on state / the machine to work/video status/
network connection/alarm trigger
5 DVD burner DVD burning
Direction key Cursor keys , select menu option
6 ENTER confirmation key
Menu setup confirmation
7Channel selection
keyAchieving channel selection single , picture to enlarge
Menu key ESC return key
FN accessibility key PTZ dome control key
REC video key PLAY playback key
PRE next PAUSE pause key
NEXT preceding STOP stop key
8
Function key
MODE image key MUTE mute key
9 Shuttle key Playback fast forward Rewind control screen switch
Back Panel:
9/90
BackPanel:
No.Physical
interface ID Description
1 Video input 16-channel video input (BNC)
2 Audio input 16-channel audio input (RCA)
3 Video output 1 channel video output interface(BNC)
4 Audio output 1-channel audio output interface (RCA)
5 Intercom input 1-channel intercom input
6 Extension interface Loop-out extention interface
7 RS 232 interface 1-channel RS232 communication interface
8 VGA interface 1-channel VGA display interface
9 HDMI interface HDMI HD output interface
10 LAN interface 1-channel network interface (RJ45)
11 USB interface 1-channel USB Interface (available to U disk backup or mouse)
12I/O Alarm, serial
interfaceAlarm input/output interface , PTZ interface
13Fan outlet interface
ATX power supply fan air outlet
14 Power interface AC power connector
Alarm input and output connections
l Alarm input
A. Alarm input is grounding alarm input.
10/90
B. Alarm input demand is the grounding voltage signal. C. When the alarm is connected with two DVRs or connected with DVR and other equipments, it should be isolated by relay. l Alarm output
Alarm output can not be connected with high-power load (no more than 1A). When forming the output loop it must prevent the big current from relay damage. Use the contact isolator when there is a high-power load l PTZ decoder connections
A. The grounding of the PTZ decoder and DVR must be shared otherwise the common-mode voltage will lead to the PTZ control failure. The shielded twisted pair is recommended. B. Avoid the entrance of high voltage. Make the layout reasonably. Take precaution from the thunder. C. In the outlying end connect 120Ω resistance paralleled to reduce the inflection and insure the signal quality. D. The 485 AB lines of DVR can not connected with other 485 output equipments paralleled. E. The voltage between the AB lines of the decoder must be less than 5V
l Front equipment grounding note
Bad grounding can lead to the burnout of the chip. l Alarm input type unlimited
The DVR alarm output port is constant opening type
4-CH Alarm Terminal
Note: Alarm input, the need to ground phase, 【NO】is opening type.
8-CH and 16-CH Alarm Terminal
11/90
Note: Alarm input, the need to ground phase, 【NO】is opening type, 【NC】is closing type ,【NO】is the common
u Alarm input port specification
1 channels alarm input. Alarm input type unlimited. The grounding and the com port of the alarm sensor are parallel (The alarm sensor is external power supply). The grounding of the alarm and the DVR should be shared. The NC port of the alarm sensor must be connected with the DVR alarm input port. The grounding of the power supply and the alarm sensor must be shared when used in external power supply. u Alarm output port specification
1 channels alarm output. There is external power supply when using the external alarm equipment. Please refer to the relay relevant parameters to avoid the overload that damages main machine. u Alarm output port relay parameters
u Speed dome connections
1、Connect the 485 lines of the speed dome with the DVR 485 interface. 2、Connect the video line with the DVR video input. 3、Electrify the speed dome.
3.5. MOUSE
Inadditiontofrontpanelkeysandremotecontrolmenu,theusercanusemouseformenufunctions.InsertmousewithUSBinterfaceintomachinepanel.
ClickLeftButton
Iftheuserdoesnotlogin,passwordboxwillpopupfirst;clicktheleftmousebuttontoenterthemainmenuwhenreal-timemonitoring.
LeftclickmousetheOptionsiconenterthemenu.
ExactInstructionsoncontrol
12/90
Changethestateofcheckboxanddynamicdetectionblock.
Clickthecomboboxdrop-downlistwillpopup.
Under3DPTZcontrolmode,clickthemouseanddragtolowerrightcanachieve3DPTZcontrol.dragfromlowerrighttoupleft,make3DPTZcontrolnarrow,detailsreferto4.1.2PTZ.
DoubleClickLeftButton
Selectandconfirmoropen,forexample,double-clickplaybackvideo.
Undermulti-screendoubleclickonechannelcanmakethepicturefullscreen;double-clickagaintoreturntothepreviousmulti-screen.
ClickRightButton
Pop-upcontextmenuundermonitorscreen
Exitwithoutsavingundermenuinterface.
TurningWheel
IncreaseordecreasevaluewhenfilldigitalboxSwitchcomboboxoptions.
Flipupanddownforlistbox.
AchievePTZ3Dzoomfunction.
MouseMove
Selectcontrolsincurrentcoordinatestomove.
MouseDrag
Selectmotiondetectionarea.
Setupregionalcoveragearea.
Select3DPTZzoomfunction.
3.6. INPUTMETHOD
Intheinputbox,choosenumbers,symbols,caseinEnglishinput.Clickleftmousebuttontoselectvalue;←meansbackspace,_meansaspace.
LetterInputInterface
13/90
DIAGRAM3-1LETTERINPUTINTERFACE
NumberInputInterface
DIAGRAM3-2NUMBERINPUTINTERFACE
SpecialSymbolsInputInterface
DIAGRAM3-3SPECIALSYMBOLSINPUTINTERFACE
ChineseInputInterface
DIAGRAM3-4CHINESEINPUTINTERFACES.
3.7. POWERON/OFF
3.7.1. POWERON
DVRinstalledcorrectly,switchonwithpowerlightison,DVRwillbootupautomatically.Differentmodelhavedifferentbootupstatus,pleaserefertotheFront-panelIntroduction.
DVRwilldetectthehardwarewhenpoweron,theprocesswilllast20secondsmoreorless.Afterthedetection,DVRmakea“Buzzing”soundandenterintoamulti-screenliveview,usercanoperatenow.PleaserefertoXXX.MainMenuIntroductionandOtherIntroduction.
14/90
Ifrecordingtimecontainpoweruptime,DVRwillautomaticallystarttimingrecordingwhenpoweron.
DIAGRAM3-5LIVEVIEW
Note:PowersupplyhastomatchwithDVR,anyothersubstitutesarenotallowed.
3.7.2. POWEROFF
Holddownon-offkeytoturnoffdevice.
【MainMenu】→【Poweroff】→【Poweroff】.
15/90
DIAGRAM3-6TURNOFFDEVICE
Note:turnoffdeviceandswitchoffpowerwhenchangingHDD.
3.7.3. OUTAGERECOVERY
Rebootafteranoutageorforcefulshutdown,DVRwillsavetherecordbeforeoutageandreturntonormaloperationmode.
3.8. ICON
3.8.1. STATUSICONS
:Record
:Videoloss
:Motiondetection
:Channellock
:Allowsscreentoswitchpolling.
3.8.2. OPERATIONICON
16/90
:NotSelected
:Selected
:DownMenu
:Confirmrevise/getintomenu.
:Cancelrevise/cancelgetintomenu
:Setparameters
:Saveparameters
:Restorefactorysettings,returntothelastsetofparametersafterthemodified
parameters,
:Applycurrentsettothesystem.
:Copycurrentsettootherchannels.
:Entertheconfigurationmenu.
:Configalarm,videodetectiontrigger’sprocessing
3.9. LIVEVIEW
PoweronDVRandentryintoliveviewmode:therearedate,time,channelnamesiconswhichindicaterecordingandalarmstatusdisplayonscreen. Switchdisplayscreensbythefrontpanel,remotecontrolormousecontrol.
Whenenablethescreenmessageforexternalalarm,videoloss,masking,motiondetection,networkandIPconflictalarm,thebelowinterfacewouldpopupwhenthosealarmoccur.ShowsasDiagram3-7AlarmStatuse:
17/90
Diagram3-7AlarmStatuse
4OPERATIONGUIDE
4.1RIGHTBUTTONMANU
Clicktherightmousebuttonafterbootingintothereal-timebrowserinterface,actionmenupop-up,showsasDiagram3-8Rightbuttonmenu.
18/90
DIAGRAM3-8RIGHTBUTTONMENU
4.1.1 SCREENSWITCHING
Max16channelinonescreen,usercanchoosesingle,four,nineandsixteenchannel.
4.1.2 PTZCONTROL
GetintoOutputàP/T/Z, SetPTZprotocol,baudrate,addressbits,PTZcanwork,fordetailsrefertochapter6.4.
4.1.3 IMAGE
Adjustthespecifiedscreen(singlescreen)imagecolorhue,brightness,contrast,saturation,gainandwhite-levelparameterssettwotimeperiodsaccordingtothelocalenvironmentdifferencebetweendayandnightforeachadjustment periodset,thedevicewillautomaticallyswitchtothebestvideoquality.AsshowninDiagram3-9ImageColor.
DIAGRAM3-9IMAGECOLOR
【Period】Twoperiodscanbesetaccordingtoambientlightduringthedayandnight,devicewillautomaticallyswitchconfigurationtime.NeedtoselecttheEnablebox.
【Hue】Adjustaccordingtoimagecolorcast
【Brightness】Visualimagebrightness,accordingtotheenvironment,reducesorincreasesthebrightnessoftheimagebrightnesstomaketheimagerelativelyclear.
19/90
【Contrast】Adjustimageofblackandwhiteinproportion,thegreaterratio,thebrighterimage.
【Saturation】Imagecolorpurity,thegreatervalue,themorecolorfulimages.
【Gain】Enlargetheimagesignaltoimprovesignalquality.
【WhiteLevel】Changethewhitelevelreferencevalue,toimprovethebrightnessoftheimagedisplay.
Note:Differentmodedifferentfunction
4.1.4 RECORDINGSEARCH
Referto4.3recordingsearch.
4.1.5 MANAUALRECORDING
Remark:manualusermusthave"RECORD"right
Inliveviewscreen,clickon【ManualRecord】,orpressthe【video】 keyonremotecontrolintomanualrecordinginterface,asshowninDiagram3-10RecodingControl.
DIAGRAM3-10RECODINGCONTROL
【Manual】Thehighestpriority,nomatterwhatthecurrentstatusofeachchannel,thecorrespondingchannelswillmakecommonrecordingwhenpress"Manual"button;
【Schedule】Recordaccordingtorecordingtypeinrecodingset.(CommonmotionDetectionandalarm);
【Stop】Stopallchannelrecording.
20/90
Tochangerecordstatusofonechannel,firstlychecktherecordingstatusofthechannelisselectednon-selected(non-selectedindicatesthatthechannelisnotrecording;selectedindicatesthechannelinrecordingmode).Thenusemousetoclick,oruse【t】or【u】arrowkeysmovetheactiveboxtothechannel,thenuse【p】or【q】arrowkeysorcorrespondingnumberkeytoswitchthechannelrecordingstatus.
Note:Allselectedcanchangerecordstatusforallchannels
4.1.6 ALARMOUTPUT
Refertochapter4.6.2alarmoutput
4.1.7 MAINMENU
Clickthe【MainMenu】,inputusernameandpassword,click【OK】toenterthesystemmenu.AsshowninDiagram3-11system
DIAGRAM3-11SYSTEMLOGIN
Defaultusers:
UserType Name DefaultPassword
Administrator admin 123456
User user 123456
Hidden default default
FORM3-1DEFAULTUSERS
Note:
21/90
Passwordsecurity:occuralarmafterthreetime’swronginputandsystemlockoutin30minutesafter5unsuccessfullogin.Forsecurityconsideration,pleasemodifythedefaultpassword.Forinformationonhowtoaddgroups,usersandmodifyusersinformation,pleasereferchapter4.4.5Uses
Management,Click totogglethecharacterinputmethodinmousemode.
4.2 MAINMENUINTRODUCTION
Themainmenuasshown,therearesearch,configuration,storage,output,maintainandshutdown.
DIAGRAM3-12SYSTEMMANU
【Search】Searchrecodingbytype,channel,timeandplayback.
【Configuration】recording,motiondetection,abnormal,alarm,system,networkandusermanagementconfigurations.
【Storage】HDDmanagementandbackupmanagement.
【Output】PTZ,alarmoutput,serialandoutputmodeconfiguration.
22/90
【Maintain】todisplaythesystemloginformation,versioninformation,streamstatistics,andonlineuserandsetthefactorydefault,automaticmaintenance.
【Shutdown】Logofftheusermenu,turnoffthemachine,restartthesystem,andswitchuserandotheroperations.
4.3 SEARCH
Inreal-timemonitoringscreen,clicktherightmousebutton,click【search】,orentervideoplaybackviamainmenuinterface,asshowninDiagram3-13RecordSearch.
DIAGRAM3-13RECORDSEARCH
Index Type Description
1 CalendarClickthecalendaricon toshowtherecordlist(onlythedateswith
greenbackgroundtakerecords.)andthenclickaspecificdatetocalltherecord.Thelistwillbeupgradedautomatically.
2 Time Selectrecordsearchstartandendtime.
3 Play Playbackcontrol:stop/play,pause,fast,slow,previous/nextframeinpause.
4Recodingmode
Choosesearchedrecordingmode,includingwhole,outsidealarm,motivedetection,wholealarmrecording.
5 Channel Choosesearchedchannel
23/90
6 PlayChoosetoplaythepreviousornextfile;choosetoplaythepreviousornext
channel.
7 SearchChoosethestarttime,channel,andclick“search”willdisplayresultsinthe
list.
8 Backup Tick“ ”tochoosebackupfileinfilelistbox,clickbackupbutton,cancelbackupfile---click“√”frombackupmenu“√”.
9 RecordList
128videorecordsshowsinsearchinglistchoosefileandpressenterordoubleclickmousetoviewrecord.
Filetype:R—normalrecord,A—alarmrecord;M—motiondetectionrecord.
10 Channel Choosethechanneltoplayback.
FORM3-2RECORDSEARCHINTERFACEDESCRIPTION
PlaybackControl:
Key Description Remark
Videoplayback:
Fast-forwardbutton8
Underplaybackmode,pressingthiskey,youcangetavarietyoffastcycleswitchingspeeds;fast-forwardbuttoncanbeusedasslow-releasebuttonreverseswitchkey.
Videoplayback:
Slowkey|
Underplaybackmode,pressingthiskey,switchcyclicallysupportavarietyof
slow-releaserate,slowreleasebuttoncanbeusedasfast-forwardbuttonreverse
switchkey.
Play/pause►/; Play/pauseswitchwhenslow-play
Actualplayratebasedonversion
Backward:
Backwardkey|Singleleftclickbackwardkey
Manualsingleframeplayback
singleframeplaybackbyclickingt│and│uwhencommonplaybackpause
ToplaybackwardsandsingleclickagaintostopbackrunundercommonplaybackRewindorsingle-frame
playback,presstheplaybutton►/;toenterthenormal
playback.
FORM3-3PLAYBACKCONTROL
24/90
Remark:
1,theplayerplaybackcontrolbarshowfileplaybackspeed,channel,time,playbackprogressandotherinformation.
2,playbackspeedandrewindfunctionarerelatedtoDVRversion,andpleasepromptontheplayerpanelshallprevail.
4.4 CONFIGURATION
Usercangetintoconfigurationthroughmainmenu;Functionofsystem,record,network,alarm,accountandabnormityasshowninDiagram3-14Configuration.
DIAGRAM3-14CONFIGURATION
4.4.1 SYSTEM
Getintosystemconfiguration:
25/90
DIAGRAM3-15SYSTEMCONFIGURATION
【Time】:Setthecurrenttime
Note:Clicktosavethetimemodification.
【DateFormat】:Tomodifythedatedisplayformat
【DaylightSavingTime(DST)】:Click“DST”toenablethefunction,andenterthelocalDSTstartingandendingtime.
【DateSeparator】:Toselecttheseparatorfordate
【TimeFormat】:24hror12hrdisplaymode
【Language】:languageselectionsvarybydifferentmodel).
【FullHDD】:WhenHDDisfull,therearetwooptions:“Overwrite”or“Stoprecording”.Ifyouselect“Overwrite”,theDVRwilloverwritetheearliestrecordedfilesandcontinuerecordingasallHDDin
26/90
DVRarefull.Ifyouselectthe“Stoprecording”optiontheDVRwillstoprecordingwhenitreachescapacity.
【PackDuration】:Tosettimelengthforeachrecord,defaultis60minutes,themaximumis120minutes.
【DVRNo.】:NumbermorethanoneDVR,click“Ad”buttononremotecontrolandinputanumbertoselectthecorrespondingDVRtooperate.
【VideoStandard】standard:PAL/NTSC(matchcameramodel).
【AutoLogout】:Thisrangesfrom0-60minutes.0meansnosetting.DVRwillautomaticallyletuserquitafterstandbytime’svacancy.
4.4.2 RECORD
Basemanagement
The“Basemanagement”interface:
DIAGRAM3-16RECODINGCONFIGURATION-BASICALLYCONFIGURATION
27/90
【Channel】thechannelselection
【Compression】H.264
【Resolution】mainstreamoptionsareD1/CIF,frameratescopeisdifferentdependingonchannelandresolution.VicestreamsupportD1/CIF.Mainstreamparametersareselectable.
【FPS】PAL:1fps-25fps;NTSC:1fps-30fps.
Note:ResolutionandframeratearevarydependingonDVRmodel.
【BitRateControl】ConstantBitrateorVariableBitrates.BitratecanbesettedinConstantBitrate. Thereare6levelsofimagequalityinVariableBitrate,6isthebestbutitisfixedinConstantBitrate.
【Audio】Enableordisabletherecordingofvideoandaudioperchannel.
【Snapshot】Selectthemainstream/extensionalstreamaudioandvideoresolutioncodingonandoff.
【SnapshotMode】Triggercapture,capturepicturewhenalarming.
【PictureSize】CIFcapture
【PictureQuality】6levels
【SnapshotRate】sethighestcapturerateforsinglechannel,1s/pc2s/pc3s/pc4s/pc5s/pc6s/pc7s/pc8s/pc
【MoreConfiguration】enter【Configuration】
【ChannelNameDisplay】showchannelnameinscreenornot
【DateDisplay】showdateornot
【ChannelDisplay】dragchanneltitle,saveinstantly,afterquittingbyrightbutton,positionofchanneltitlewouldnotvaryindisplayerormonitor,variedpositioncanbeshownrecorderandWEBinterface.
【TimeDisplay】dragtimetitle,saveinstantly,afterquittingbyrightbutton,positionoftimetitlewouldnotvaryindisplayerormonitor,variedpositioncanbeshownrecorderandWEBinterface.
【VideoCover】4zonespreviewanddisplayprotect,privacyzonecanadjustarea.
【Preview】setmaskingzone,maskingzoneshowninthescreenwhendisplay,nomaskingzoneinwebandrecord.
【Monitor】setmaskingzone,maskingzoneshowninthescreenwhendisplayorrecord.
28/90
DIAGRAM3-17MORECONFIGURATIONS
【Copy】copyonechannel’sconfigurationtootherrecordplan
RecordConfiginterface:Diagram3-18RecordingConfiguration-recordingplan
29/90
DIAGRAM3-18RECORDINGCONFIGURATION-RECORDINGPLAN
【Channel】:Toselectchannel.Green,yellowandredrefertothenormal,MDandalarmrecordingtype.Modifyitin【Edit】.
【Copy】copyonechannel’sconfigurationtoother
【Edit】editplaninterfaceDiagram3-19EditPlan:
30/90
DIAGRAM3-19EDITPLAN
【Time】recordingtime,6recordingtimezonecanbeseteveryday
【Normal】fornormalrecord
【MovingDetection】ForMovingdetection
【Alarm】Foralarmrecord
4.4.3 NETWORK
SettheDVRnetworkparametersin“Network”interface.ThedefaultIPaddressis192.168.1.88
Basesetting
Basesettinginterface4-13:
31/90
DIAGRAM3-20NETWORKCONFIGURATION-BASECONFIGURATIONS
【DHCP】EnabletheDVRtoobtainanIPaddressautomatically.Ifthisisenabled,theDVRwillrebootandsearchforaDHCPserver,andthenassignadynamicIPaddress.ThedynamicIPaddresswillbedisplayedinthemenu.EnterastaticIPaddressifthereisnoDHCPserviceavailable.IfyouareusingtheadvancedfeaturePPPoE,thentheIP/mask/gatewayandDHCPareunabletobechanged.
【IPAddress】use(pq)orinputnumberstomodifyIP,thenset【subnetmask】 and【defaultgateway】forthisIP.
【FirstDNSServer】DNSserverIP
【AlternateDNSServer】DNSalternateIP
【PhysicalAddress】physicaladdressofcurrentnetport
Advanced
Advanceinterface(Diagram3-21NetworkConfiguration-Advanced):
32/90
DIAGRAM3-21NETWORKCONFIGURATION-ADVANCED
【PPPOE】enablePPPOE
InputPPPOEusernameandpasswordprovidedbyISP.
Operation:Usingthisfeature,theDVRwillautomaticallyobtainapublicIPaddressfromyourISP. YoucanthenvisitthewebinterfaceoftheDVRbytypingthisIPintoInternetExplorer.
【DDNS】enabletheDVRtoupdateaDDNShostname,whichrunonafixedIPaddresswebclient.
SelectDDNStype(supportsvariousDDNScurrently,includeCN99DDNS,NO-IPDDNS,PrivateDDNSandDyndnsDDNS,SysdnsDDNSwithmanyothercompatible)andenablethefunction;inputtheupdateserverIP,port,DNS,usernameandpassword.Oncesetup,youcanthenloginviatheWebclientbyusingthisDNSinInternetExplorer.
PrivateDDNSisavailableforusewithaspecificDDNSserverandclientsoftware.
Detailsreferto6.1DDNSfunction
33/90
【NTP】on/offNTP.NetworkTimeProtocol–allowstheDVRtosyncwithSNTPtimeserverautomatically.
HostIP:inputIPofNTPserver
Port:ThisSNTPsupportTCPonly,theuniqueportis123.
Updatecycle:timeintervalbetween1minand65535min.
Timezone:London:GMT+0,Berlin:GMT+1, Cairo:GMT+2, Moscow:GMT+3,NewDelhi:GMT+5, Bangkok:GMT+7, HongKong/Peking:GMT+8, Tokyo:GMT+9, Sydney:GMT+10, Hawaiistandardtime(HST):GMT-10, Alaskastandardtime(AKST):GMT-9, Pacificstandardtime(PST):GMT-8, Mountainstandardtime(MST):GMT-7, Centralstandardtime(CST):GMT-6,Easternstandardtime(EST):GMT-5, Atlanticstandardtime(AST):GMT-4, Brazil:GMT-3, middleAtlantic:GMT-2.
【IPFilter】DVRauthoritymanagement,ifyouenablethewhitelist,onlytheDVRinIPlistisallowedtoconnect.Thissystemsupportsamaxof64IPs.
【On-lineUser】range:0-10,0indicatesthatnoconnectionsareallowed.
【Networkmonitoringconnections】0-32shouldbeproper.NeedCheckfirstthenbrowserealtimevideoonthenetwork,thenumberofconnectionsdependingonnetworkbandwidth,thegreaterthenumber,thegreaterthenetworkload,theimpactofvideoplaybacksmooth
Theautomaticsettingadjuststhesesettingsbasedonavailablenetworkresources.
【Speedyonlinedownload】0-8shouldbeproper.
【NetworkTransmissionQOS】FluencypriorityorPictureQualitypriorityorself-adaption
Y,accordingtothesetting,thenetworkautomaticallyadjuststhestream.
【Speedyonlinedownload】ifenabled,speedis1.5-2timestonormalspeed.
【HTTP】default:80
【TCP】default:8000,variable
【UDP】default:8001,variable
【UPnP】Protocolontherouterautomaticallyopenportmapping,makesureUPnPfeatureisenabledontherouter,detailsrefertochapter6.3.3
【Multicast】tick‘Multicast’andsetagroupin‘Set’,IPshouldbelimitedasfollowpicture,portnolimit.
34/90
【Email】SetthesendermailboxSMTPserverIPaddress,port,username,passwordandsender’smailbox,mailSSLEncryption.
EmailtitlesupportChinese,EnglishandArabicnumeralsinput,Maxinput32characters.Maxsupport3ReceiveAddressesandSSLEncryptionMailbox.
【FTP】:Tick“FTP”andclick“Set”
SetFTPserverIPaddress,portanddestinationfolder.SystemwillcreatefoldersbyIP,timeandchannelifthereisnoremotefolderspecified.
FTPusernameandpassword
Setamaximumfilesize,channel,time,typeandetc.
SetFTPfilelength.Uploadthewholerecordifthefilelengthissmallerthansetting;leaveouttheexceedpartifthefilelengthisexceedthesetting;0referstouploadingtheentirerecordinanycondition.
Setuptotwotimeperiodsandchoosefrom3differentrecordtypesforchannels.
【AlarmCenter】reservedinterface
Networkstatus
DisplaythecurrentDHCPPPPoEandIP.
4.4.4 ALARMCONFIGURATION
Localalarm
LocalAlarminterface(Diagram3-22AlarmConfigurations):
35/90
DIAGRAM3-22ALARMCONFIGURATIONS
【AlarmInputChannelNo.】selectthealarminputchannel
【Enable】thespecifiedalarmin/out
【Type】selectthealarmcircuittype.
【Copy】copytheconfigurationtoanotherchannel
【ProcessMode】enteralarmlinkageinterfaceDiagram3-23AlarmConfiguration-localalarm–ProcessMode-Period:
36/90
DIAGRAM3-23ALARMCONFIGURATION-LOCALALARM–PROCESSMODE-PERIOD
【Period】 setalarmactiveperiod
37/90
DIAGRAM3-24ALARMCONFIGURATION-LOCALALARM–PROCESSMODE-LINKAGE
【Linkage】 on/off【RecordChannel】,【PTZ】,【Tour】,【Snapshot】 linkageandselectchannel.
38/90
DIAGRAM3-25ALARMCONFIGURATION-LOCALALARM–PROCESSMODE-ABNORMITY
【Abnormity】:enableordisable【AlarmOut】,【ShowMessage】,【SendEmail】 and【Buzzing】
Timedelayforalarmcancelis10-300s
Notice:somemodelshavenoLOCALALARMFunction;pleaserefertotheProductSpecification.
Videodetection
【motiondetection】motiondetectionandalarm
【zonesetting】22*18=396zonesmask
【Sensibility】6grades
【management】assameaslocalalarm
【preview】alarmpreview
【videolose】detectvideolosesandalarm
39/90
【management】assameaslocalalarm
【preview】alarmpreview
4.4.5 USERMANAGEMENT
Note:
Groupandusernamescanbefrom1-6charactersinlength.Validcharactersincludeletter,numbers,andlimitedsymbols:underline,subtractionsign,dot,youmaynotuseaspaceasaleadingorendingcharacter.
Thereisnolimittothenumberofgroupsorusers.Bydefaulttherearetwodifferentgrouplevels:adminanduser.
Usermanagementdeterminedupontwolevels:thegroupandtheuserlevel.
Groupandusernamescannotbeduplicated,andeachusercanonlybelongtoonegroup.
UsermanagementinterfaceasDiagram3-26UserManagement:
40/90
DIAGRAM3-26USERMANAGEMENT
【Addusers】addgroupmemberinformationandsetauthorities.
Defaultusersare:“admin”,“user”andhidden“default”,thepasswordoffirsttwousernameis123456.“admin”hasadvancedauthorities;“user”onlyhassurveillanceandplaybackauthority.
Hiddendefault:operateinpassword-lessloginmode,cannotdelete,DVRlogininthisnameautomaticallyif“nouserlogin”,usercanreviselimitsofpowerthenoperatesomewithoutlogin.
Enter【Addusers】inputusername,passwordandselectgroupandreusableoptions.Reusableallowstheaccounttobeusedbymultiplelogins.
Userscanonlybelongtoonegroup. Userrightscannotexceedgrouprights.
【Modifyusers】modifyexistinggroupmemberinformationandauthority.
【Addgroup】addgroupandsetgroupauthorities
Setagroupandauthorize60itemsincludingcontrolpanel,shutdown,liveview、playback,record,recordbackup,PTZcontrol,account,systeminformation,alarmin/outsetting,systemconfig,searchlog,logdelete,upgrade,operationauthority,etc.
【Modifygroup】modifyexistinggroupinformation.
【ModifyPassword】changepassword
Selectausernameinputtheoldpasswordandnewpasswordtwice.
Click【Save】toconfirm
Passwordcanbein1-6numbers,lettersorsymbol;blankinbeginningandendisinvalid.
Theaccountwithmanagementauthoritycouldchangeothers’password.
4.4.6 ABNOMITY
AbnormityinterfaceasDiagram3-27:
41/90
DIAGRAM3-27ABNORMITY
【NoDisk】alarmwhenHDDisnotpresentorcannotbedetected.
【Process】includes:【AlarmOutput】,【DisplayOnScreen】 and【SendEmail】.
【DiskNoSpace】alarmwhenharddiskcapacityislowerthansetting.
【ProcessMode】issameas【NoDisk】’s【ProcessMode】
【NetworkFailure】alarmwhennetworkisnotconnected.
【ProcessMode】includes【AlarmOutput】,【DisplayOnScreen】 and【SendEmail】andrecordinglinkage.
【IPConflict】alarmwhenIPaddressconflict.
【ProcessMode】 issameas【NoDisk】’s【ProcessMode】
【DiskError】 alarmwhenthereiserrorinreadingandwritingharddisk.【ProcessMode】 issameas【NoDisk】’s
42/90
【ProcessMode】issameas【NoDisk】’s【ProcessMode】
4.5 STORAGE
4.5.1 HDDMANAGEMENT
MaintainandmanagelocalHDD:Diagram3-28StorageManagement
DIAGRAM3-28STORAGEMANAGEMENT
BaseConfiguration
“BaseConfig”asDiagram3-29HDDmanagement–baseconfiguration,showsDVRstoragecapacity,availablespaceandworkingstatus.
43/90
DIAGRAM3-29HDDMANAGEMENT–BASECONFIGURATION
【Format】itispossibletoformatanindividualHDD.
Note:Harddiskformatoperationresultinthelossofvideodata
【Set】tosetHDDasread-write,readonlyorredundancymode.Inreadonlymode,videodatacannotbecovered.
HDDS.M.A.R.Tintelligentdetection
44/90
DIAGRAM3-30S.M.A.R.TTECHNOLOGY
Record
Recordmenu,asDiagram3-31HDDManagement-record,showsstart-stoptime.
45/90
DIAGRAM3-31HDDMANAGEMENT-RECORD
4.5.2 RECORDBACKUP
ConnectanExternalUSBdevicewiththeUSBporttobackupinthe“RecordBackup”menu(interfaceDiagram3-32RecordBackup).
46/90
DIAGRAM3-32RECORDBACKUP
【Detect】:IdentifyexternalUSBdeviceanddisplaythedeviceinformation.
【Backup】:ticktheexternaldeviceandclick【Backup】toenterthebackupmenu(asDiagram3-33Backup).
47/90
DIAGRAM3-33BACKUP
Selecttherecordstart-stoptimeandclick【Add】toaddinlist;duplicateitbyinputtingthestart-stoptimeagain;click【Delete】toclearthefileslist. Ticktherecordyouwantandclick【Start】tobackupanddisplaytimeremaining.
【Delete】deletealldatainUSBbackupdevice
Note:USBbackupcarryplayerautomatically
Note:thisoperationprobablycausepermanentdataloss
4.6 OUTPUT
ThefollowingDiagram3-34PeripheralManagementshowstheperipheralmanagementinterface
48/90
DIAGRAM3-34PERIPHERALMANAGEMENT
4.6.1 PTZ CONFIGURATION
SetPTZchannel,protocol,address,baudrate,etc.
Firstly,setthedomeaddressandensuretheA,BlinesofdomeandDVRareconnectedcorrectly.Theconfigurationinterface(Diagram3-35PTZconfigurations):
49/90
DIAGRAM3-35PTZCONFIGURATIONS
【Channel】:SelectthechannelforPTZcamera
【Protocol】:Selectassociateddomeprotocol(e.g.PELCOD)
【Address】:selectassociateddomeaddress,default:1(Note:thisaddresshastocorrespondwithdomeaddress,orthedomewillsnotcontrol.)
【BaudRate】:Selectthedomebaudrateandcontrol,defaultis9600.
【DataBits】default:8
【StopBits】default:1
【Parity】default:None
4.6.2 ALARMOUTPUT
ThismenumanagesalarmoutputparametersanddisplaysthecurrentstateofAlarms(Diagram3-36AlarmOutput).
50/90
DIAGRAM3-36ALARMOUTPUT
【Channel】alarmport
【Auto】alarmoutputisdeterminedbythealarmoutputmenu,whileinautomode.
【Manual】 alarmoutputisonandthestatusisactive.
【Close】alarmoutputisoffandthestatusisinactive.
【Status】currentstatusofalarmoutput
Notice:SomemodelshavenoLOCALALARM,pleaserefertotheproductsdescriptions.
4.6.3 PORTCONFIGURATION
PortConfigurationinterface(Diagram3-37PortConfigurations):
51/90
DIAGRAM3-37PORTCONFIGURATIONS
【Function】adjustprotocol
Generalport:upgradeandadjustbyportandsoftware;
Keyboard:keyboardconnectedbyport;
Transparentport:transparenttransmissionofdata;
ProtocolPort:portinformationoverlayneedtosetthisAgreement;
Bypassedport:connectwithPCtobypassparameters;
Netkeyboard:keyboardconnectedbynetport;
PTZmatrix:controlPTZmatrix
Note:CertainmodelsarewithoutanRS-232port,pleaseseeSpecifications.
【BaudRate】setbaudrate.
52/90
【DataBit】default:8
【StopBit】default:1
【Confirm】defaultisN/A
4.6.4 DISPLAY
Displaymodecansettheunit'sdisplayandpolling
DisplayMenu
DIAGRAM3-38OUTPUT-MENUOUTPUT
【Transparency】:total4grades
【ChannelName】:tomodifychannelname,availableoptionsaresymbols,letters,andnumbers.
Note:1)Channelnameupto48half-widthcharacters
2)16charactersissuitable,otherwisesomeproblemshappenwhenmulti-screen
53/90
【TimeDisplay】:tochoosewhethertimedisplaysonscreen
【ChannelDisplay】:tochoosewhetherchannelnamedisplaysonscreen
【OverInfo】:tochoosewhetheroverlayinginformationdisplaysonscreen
Outputconfiguration
DIAGRAM3-39OUTPUT-OUTPUTCONFIGURATION
【VGAOutput】toselectVGAresolutionandrefreshrate,defaultis1024×768@60Hz.
【TVAdjust】toadjustTVoutputarea.Modifytheimagetotherightsizeformonitor.
【VGATVColorSet】toadjustdisplayer’shue,brightness,contrast,saturation
【TVColorSet】toadjustmonitororTV’sbrightness,contrast,saturation
Tourconfiguration
54/90
DIAGRAM3-40OUTPUT-TOUR
Settingtourmodeandintervalbetweenrotation,thetimeiswithin5-120s,themodeincludesinglescreen,four-,eight-,nine-,sixteen-screen.
【MotionTourType】:tosetthemotiondetectiontourmode
【AlarmTourType】:tosetthealarmtourmode
Note:ShortcutSetting:clickthebuttonatthetoprightcornerofthemonitoringpictureorpresstheShiftKeytoswitch,youcancontrolthetour.
4.7 MAINTAIN
Thefollowingpictureshowsthemaintaininterface
55/90
DIAGRAM3-41MAINTENANCE
4.7.1 LOG
【LOG】displaysystemloginformation.
56/90
DIAGRAM3-42LOG
SelectthetypeandtimepresstheFind,thesystemwilldisplaythelogintabularform,youcanalsoclickthebackupbuttontoexportthelogbackuptoyourcomputer.
Logtype:systemoperation;configuration;datamanagement;alarmevent;recording;usermanagement;logdelete;documentoperation.Selectthetypeandtimetofiltertheloglist.
Click“delete”todeletealllogs.
4.7.2 VERSION
【Version】:Showfeatures,softwareversionetc.
【upgrade】:ConnectaUSBflashdevicewhichcontainstheupgradefirmwareandclick“Upgrade”.
Note:upgrademaycausethestartupfailure.Pleaseoperateunderprofessionaldirection.
4.7.3 DEFAULT
57/90
【default】restore(itemsareselectable) (Diagram3-43RestoreDefault)
DIAGRAM3-43RESTOREDEFAULT
Note:Menutransparency,language,timeformat,videoformat,IP,userID,etcarenotrestored.
4.7.4 BPS
【BPS】showsvideo’ssize,datarateofeachchannelbywaveform.
Note:Estimatedvaluejustforreference
4.7.5 AUTOMAINTAIN
【AutoMaintain】setautomaintenanceitems.
4.7.6 ON-LINEUSER
【On-lineUsers】checkthecurrentonlineuser’sstatus.
58/90
4.8 SHUTDOWN
DIAGRAM3-44SHUTDOWNS
【MenuLogout】logoutofthecurrentuseraccount
【Shutdown】shutdowntheDVR
【RestartSystem】reboottheDVR
59/90
5 WEB&CLIENT
5.1 WEBOPERATION
5.1.1 NETWORK CONNECTION
H&MSeries:ChecknetworkconnectionbyLCDonfrontpanel,“ ”refersconnectionerror,PSeries:CheckB-Lamponfrontpanel,lightindicatesconnection
SetIP,subnetmaskandgatewayforcomputerandDVR.PleaseassignthesamesegmentIPaddresswithoutrouter,needtosettheappropriatesubnetmaskandgatewaywithrouter.
ThedetailofDVRnetworkconfigurationpleasesee【Configuration】→【NetworkSetting】
EnsuretheIPiscorrectandcheckwhethertheDVRisonthenetworkbyusingtheWindowscommand“ping”.
5.1.2 ACTIVEXCONTROLSETUP&LOGIN/LOGOUT
UsercanremoteaccestoDVRbyInternetExplorer,assumingyouhaveacorrectnetworkconfiguration.
ThefollowinginterfacewillpopupwhenyouaccesstheIPaddressinInternetExplorer.
60/90
DIAGRAM5-1LOGINSCREEN
InstallActiveX:Rightclickandchooseinstall.IfinstallationisblockedbyWindows,pleaseaddtheIPasatrustedsiteorloweryourInternetExplorersecuritysettingstoallowthis.
DIAGRAM5-2INSTALLCONTROL
Thefollowinginterfacewillpopupwhenyouinputyourusername,passwordandclick“Login”.InterfacelikeDiagram5-3WebInterfacewhenuserloginsuccessfully.Click“Exit”toquit.
5.1.3 WEBOPERATIONINTERFACE
61/90
DIAGRAM5-3WEBINTERFACE
Index Name Description
1 Channel Channelselection
2 Functionkey
Localplayback:playbacklocalrecord
Openall:playliveviewsinsurveillancewindow
3 Surveillancewindow Changewindowlayout
4 Imagecolor&othersaturation
Imagecolor:modifybrightness,contrastand
Other:setcapturepath,recorddownloadpathandreboot
5 PTZcontrol PTZcontrolmenu
6 MenuSystemconfig,recordsearch,alarmsetting,
exit,etc.
62/90
FORM5-1DESCRIPTION
5.1.4 LIVEVIEW
IntotheWEBinterface,selectthefocuswindowinlivewindow,thefocuswindowhasalightblueborder.
Fromtheleftchannelcolumnselectchannel,asshowninDiagram5-4ChannelChoices:
DIAGRAM5-4CHANNELCHOICES
Clickon2areainupperrightcornercanchooseopen/closethechannelofthemainstreamorsecondarystream,showsthecurrentDVR'sIPandrateinformation,asshowninDiagram5-5Streaminformation
DIAGRAM5-5STREAMINFORMATION
Lowerleftcornershowsthecurrentvideochannelname.
Upperrightcornershowsthecurrentvideotimeinformation.
Click“ ”(Lowerleftcornerofthedisplaywindow)toswitchbetweensinglescreen
andmulti-screen.
Lowerrightcornerofthedisplaywindowisfunctionkeys,asDiagram5-6FunctionKey,refertoareazoom,Multi-screenswitch,localrecord,,captureandmute/unmuteaudio.
Areazoom:Videoimagescanbeenlarged;
Multi-screenswitch:switchfromsinglescreentomulti-screenandviceversa;
63/90
Localrecord:saveandrecordvideotoalocalHDDwhileinaliveview.Setrecordingpathin
configuration;
Capture:captureofthepresentchannel,setthepathin“other”;
Sound:on/offsound.
Offvideo:offthefocuswindowvideo.
DIAGRAM5-6FUNCTIONKEY
5.1.5 PTZCONTROL
Setprotocol(see【Setting】→【PTZConfig】)
ControlPTZdirection,stepsize,zoom,IRIS,preset,tour,pattern,borderscan,light,wiper,autopan,etc.
StepsizecontrolsPTZdirectionandspeed,e.g.stepsize8ismovedfasterthanstepsize1.
Eightdirectionrotations:up,down,right,left,upleft,upright,lowerleft,lowerright.
64/90
DIAGRAM5-7PTZCONTROL
Borderscan
Operation:selectthecameralinescanoftheleft/rightmarginbydirectionbutton,andclicktheSettingsbuttonintheleft/rightmarginpositiontodeterminetheleftborder.
Preset
Operation:modifypresetpositionbydirectionbuttonandinputtingapresetnumber,thenclick“Add”tosave.
Tour
Operation:select“Tour”;Pointbetweenthefirstcruiselinecruiseinputboxvalue.Andinputnumbersin“Path”and“preset”.Click【AddPreset】toaddonepresetinthecruisepath,andrepeattoaddadditionalpresets.Click【ClearPreset】todeleteapreset,repeattodeletemore.
Pattern
Operation:Click“Pattern”inordertorecordanautomatedpattern.Then,gobacktothePTZcontrolsinordertomodifythezoom,focusandIRIS,etc.Stoprecordingin“Pattern”settingtosavethepattern.
AUX
On/offoneofAUX
65/90
Wiper
On/offwiperunderprotocol
5.1.6 CONFIGURATION
AccessDVRlocalconfigurationmenubyclick“SystemSetting”,thefurtherdetailspleaserefer【Localoperationguide】(Diagram5-8CONFIGURATION).
DIAGRAM5-8CONFIGURATION
5.1.7 SEARCHRECORD
Click“Searchrecord”toopenthesearchinterface(Diagram5-10),cansearchandoperaterecord,alarm,motion,localrecord
Searchrecord
Byselectingtherecordtype,startandendtimes,andclickthecheckbutton,getalistoffilesontheDVR.Selecttheappropriatefileanddownloadcanbeplayed
66/90
Play
Doubleclickasearchresulttoplayinvideowindow.Controltheplayingvideobythecontrolkeysonthebottom.Atthispoint,thebottomofthevideowindowwilldisplaythevideocontrolbuttons,videoplaybackcanbecontrolled.
DIAGRAM5-9PLAYBACKCONTROL
Download:selectasearchedvideotodownloadtolocal.Thedownloadspeedandpercentagearedisplayedonthebottomofthescreen.
DIAGRAM5-10SEARCHRECORD
67/90
5.1.8 ALARMCONFIGURATION
Clickthe【Alarm】 toenterthealarmsetupmenu,usersetupandoperatethealarmmode,asDiagram5-11Alarm.
Choosetypeofalarmonmenu,monitorvideoloss,motiondetection,diskfull,diskerror,videomask,extennalalarm.
Click【VideoPop-up】,openthevideoloss,motiondetection,harddiskfull,harddiskfailure,videoblock,videoencoderalarmpop-uplinkage.
Click【prompt】,opentheprompts:whenanalarmoccursinreal-timewillpop-upalarmwindowmenu.
Click【SoundPop-up】,youcanchoosealarmtonepre-recordedonthelocalharddrivewhenanalarmoccurs,tonefileinWAVformat.
68/90
DIAGRAM5-11ALARMCONFIGURATION
5.1.9 ABOUT
PleaserefertoWEBcontrolsrelatedversioninformation.
5.2 CLIENTOPERATION
PleaserefertoIMS200Description
69/90
6 FUNCTION
6.1 DDNSFUNCTION
6.1.1 SUMMARY
DynamicDNSisakindofsystemwhichpointinternetdomainnametovariableIP.Accordingtotheruleofinternetdomainname,domainnamemustassociatewiththefixedIPaddress.DynamicDNSprovideafixedNameserverforthedynamicdomain,andthenguidethedomainsearchtotheIPaddressofdynamicuserthroughNameserver,whichcanmaketheoutsideuserconnecttothedynamicuser’sURL.
6.1.2 VSSIP&FNT
VSSIP isaprofessionaldynamicdomainnameanalysisserverembeddedinourcompany’sDVR,pleasecontacttothedealeroragentforaccountnumberofDDNS.Clicktheenableintheconfigurationwindowaftergettingtheaccountnumber,andinputtheaccountnumberinformationanditwilldo.
FNTisaprofessionaldynamicdomainnameanalysisserverembeddedinourcompany’sDVR,inputusernameandpassword,aftersuccessfulappliactionandclickenable,thenitisOK.
6.1.3 CN99(WWW.3322.ORG)
Register
RegisterNewUsersorLoginatwww.3322.org.
Click“MyControlPanel”atthenavigationbar.
Clicktheleftside,“new”undertheDDNS.
Fillinthenameofthehostmachine,IPaddresswillautomaticallydetectinthecurrentinternet.LeavetheMailServersblank,andthenclickthe“OK”button.
EmbeddedDVRSetting
Open【MainMenu】→【Configuration】→【Network】→【Advanced】→【DDNS】→Enable
Name Configuration
DDNS CN99DDNS
70/90
IP Members.3322.org
Port 80
Domainname xxx.3322.org
Username xxx
Password xxxxxx
Aftersettinguptheinformationasabove,youcanaccesstheEmbeddedDVRviaXXX.3322.org
Notice:Themainmachine’sIPshouldrefertotheinformationofthewebsite.
6.1.4 NO-IP(WWW.NO-IP.COM)
Register
Registernewusernameatno-ip,click【CreateAccount】.
Createdomainname,click【AddaHost】.
EmbeddedDVRSetting
Open【MainMenu】→【Management】→【Network】→【Advanced】→【DDNS】→【Enable】
Name Configuration
DDNS NO-IPDDNS
IP dynupdate.no-ip.com
Port 80
Domainname xxx.xxx.org
Username xxx
Password xxxxxx
6.1.5 DYNDNSDDNS(WWW.DYNDNS.COM)
Register
Tologinatdyndns,registeranaccount.
Clickontheconfirmationlink,logintheaccount,click【AddHostServices】 at[MyServices],setyourownrealmname,andthenoperateaccordingtotheprocedure.
71/90
ConfigurationoftheEmbeddedDVR
Open【MainMenu】→【Management】→【Network】→【Advanced】→【DDNS】→【Enable】
Name Configuration
DDNS DyndnsDDNS
IP Members.dyndns.org
Port 80
Domainname xxx.xxx.com
Username xxx
Password xxxxxx
6.1.6 TESTANDVERIFYDDNS
AftersettingtheEmbeddedDVR,waitforafewminutes,analysisrecordswillupdate.ClickOperationintheMenuofcomputer,input“cmd”,click“OK”toopenawindow.AstheDiagram6-1RunCommandLineProgramshows.
DIAGRAM6-1RUNCOMMANDLINEPROGRAM
Input“ping+Domainname”thenpressesEnter,astheDiagram6-2DNSshows.
72/90
DIAGRAM6-2DNS
ThecomputerwillanalysesthedomainnameconfiguratedinDVR,andreturntothecurrentIP,asthepictureshowsunderlinedinred.WhentheIPcorrespondtotheembeddedDVR’sIPinPublicinternet,itmeanstheDDNSissettingright.Iftheyarenot,pleasecheckthenetworkconnectionofembeddedDVRandDDNSinformation.
6.2 PORTMAPPING
Portmappingismappingaportofoutsidewebhost’sIPaddresstoamachineinsideweb,andprovidetheservice.WhenuserconnectstotheportoftheIP,theserverwillautomaticallymaptherequesttothecorrespondingmachineinsideLAN.
Withthefunctionofportmapping,wecanmapmanyportsofamachine’sIPaddresstodifferentmachines’differentportsinsideweb.Theportmappingcanalsohaveotherspecialagentfunctions,likePOP,SMTP,TELNET,etc.Theoretically,itcanprovidemorethansixtythousandports.
Forexample,ifwewanttomapawebserverwhichhasanIPaddressof192.168.111.10,wejustneedtoinputtheIPaddressandTCPport80intotheportmappingchartoftherouter.
Therearetwowaystomaptheport:UPnPfunctionautomaticallymapandmodifytherouter’sportmappingchartbymanual.
6.2.1 UPNPFUNCTION
73/90
InordertogetconnectiontotheEmbeddedDVRthroughPublicnetwork,weneedtosettheRoutertocrosstheNATofEmbeddedDVR.UPnPcanmaketheNATcrossautomaticallybytheUPnPagreementofEmbeddedDVR,anddon’thavetosettheRouter.
Note:torealizetheUPnPFunction,theremustbeRoutersupportandenabletheUPnPFunction.
Thefirststep
ConnecttheRoutertothenetwork,gettotheMenuoftheRouter,settheRouter,andenabletheUPnPFunction.
Routersmadebydifferentmanufacturersmayhavesomedifference,pleaserefertothespecificationcarefullybeforesettingtheRouter.
Thesecondstep
ConnecttheEmbeddedDVRtotheRouter;theconfigurationwillautomaticallygaintheIPaddressorstaticIP.AftersettinguptheIP,clicktheAdvancedConfig.AndgettotheXXX,portsandmulticastetc.choosetoopentheEnableatthe【UPnPportmapping】
Thethirdstep
EnterintotheRoutermanagementinterface;detecttheportifthereisalreadyaPortmapping.Ifthereis,itshowsUPnPsetting’sfinished.
Theforthstep
InputtheIPaddressinIE,andaddportnumberoftheEmbeddedDVR,forexample:155.157.12.227:81.IfyouwanttoenterbytheClientSoftware,usetheTCPportofferedbytheouternet.
Note:ifthereareafewembeddedDVRsneedtosettheUPnPfunction,inordertoavoidIPconflict,settheportsofembeddedDVRintodifferentportsnumbers.Otherwise,itwillchoosetheembeddedDVRportsetprecededasthefirstchoice.
6.2.2 MANUALPORTMAPPING
Thefirststep
ConnecttheEmbeddedDVRtotheRouter,setthestaticIP.
Thesecondstep
74/90
LoginRouter,enterintotheconfigurationmenuofRouter,andsetthemenu.Thengettoport,settheIPdistributedbytheEmbeddedDVR,andsettheruleofportmapping,addHTTPandTCPportintomappinglist.
DefaultaccessportsofEmbeddedDVRincludeHTTPport80andTCPport8000,iftheportsareoccupiedbytheotherdevices,pleasemodifythedefaultportoftheEmbeddedDVRintoothervacantports.
Thethirdstep
InputthepublicnetIPaddressintheIE,andaddtheportnumberoftheEmbeddedDVRyouwanttoaccessaftertheIP,forexample:http://155.157.12.227:81.IfyouwanttoaccessbyClientSoftware,youcanusetheouternetTCPportdirectly.
Notice:fordetailconfigurationsetting,pleaserefertotheusermanualofRouter.
6.3 NTPFUNCTION
EnableNTPfunction;makethetimesynchronizationwithboththeDVRandGPSclockserver,toensuretheaccuracyofdevicetime.
6.3.1 INTERNETCONFIGURATION
Gettothe【CONFIGURATION】→【NETWORK】,choose【Advanced】,andthenchoose【NTP】toset.
AfterthedevicecanaccesstheInternet,NTPservercanusethestandardNTPserverasthetime.Forexample,theserverofChina’snationalresearchcenter(IPaddress:210.72.145.44).InputtheIPaddressanddomainnameofrelativeserveratNTPsetting.
ToactivateNTP,clicktochoose“Enable”.
Theintervalofchangingtimeisfrom1to65535minutes.
6.3.2 INTRANETCONFIGURATION
IfDVRworkundertheintranet,usercansetupaprivately-ownedserverasclocksource.NTPaddressinDVRconfigurationfillinprivately-ownedNTPaddresscanwork.
Privately-ownedNTPservercanadoptstandardNTPproductsandaccuratetimePCsystem.PleaserefertobelowinstructionwhenadoptPCsystemasaNTPserver.
NTPServerSetUpunderWindows
“Start”menu→“Run”(orWin+R),input“regedit”togetintoREGEDIT.
75/90
BuildanewkeyassignmentofDWORDValueunder:
HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Services\W32Time\Parametersregistrysubkey;
Changethevalueto1,andsave.
Restartthecomputer.
NTPserversetupunderLinuxsystem
DuetotheparticularityofLinuxsystem,fordetailwaytoerecttheNTPserver,pleaserefertoeveryeditionsofthemanual.
6.4 PTZ
Inlivescreen,rightclickandselect【PTZControl】 oncontrolchannel,asshowninDiagram6-3PTZcontrol.
6.4.1 PTZCONTROL
FromPTZcontrolmenu,setdirectionsteplength,zoom,focus,iris,advancedfeatures,auxiliaryfeatures,camerasettings.
DIAGRAM6-3PTZCONTROL
Stepsize:ControlsPTZdirectionandspeed,e.g.stepsize8ismovedfasterthanstepsize1.(Range1-8,8ismaxvalue)
Click and ofzoom,focusandIRIStomodifyzoom,focusandbrightness.
Eightdirectionrotations:up,down,right,left,upleft,upright,lowerleft,lowerright.(Frontpaneljust4direction)
76/90
Quicklocation:<SIT>inthemiddleofthedirectionarrows,makesuretheprotocolsupportthisfunction,onlymousecontrol.Clickanypoint,PTZwillturntoitandmoveittothecentreofscreen
Mousedragonquicklocationpage,support4~16timesvariation,dragfromtoplefttobottomrighttozoominbox,dragfrombottomrighttotopleftforzoomoutbox.
AdvancedFunction
Clickpageswitchintotheadvancedfunction,asshowninDiagram6-4PTZ-Advanced
【Preset】:Inputthewantedpresetnumberwhichhasbeenrecorded.Thenclickthepresetbuttontocallthefunction.
【Tour】:Inputthetournumberandclick“tour”torunitorstoptourby“stop”button.
【Patrol】:Inputthepatrolnumberandclick“patrol”toonthefunction.Thecamerawillworkunderthecreatedpatrolpath.Rightclicktohidethemenu.Clickthedirectionkeyinmenutostopthepatrol.
【Line】:Click“line”callthelinescanfunctionaspersetlinetoscan,thebuttonwillturnto【Stop】,ifyouwanttostopthemotion,clickit.
DIAGRAM6-4PTZ-ADVANCED
AUX
Click“PageSwitch”toentertheAUXinterface.(Correspondingwithprotocol)Diagram6-5Auxfunction
77/90
DIAGRAM6-5AUXFUNCTION
PTZSETTING
Click【P/T/Z】toset【Preset】,【Tour】,【Pattern】,【Border】.Graykeysrepresentunsupportedfunction(Diagram6-6Presetsetting).
DIAGRAM6-6PRESETSETTING
【Preset】setting:Diagram6-6Presetsetting,setcamerapositionthroughthedirectionkey
Click【Preset】andinputvaluenumber,Click【Set】tosavethesecoordinatestothatpresetnumber
【Tour】setting:Select“Tour”,asDiagram6-7Tour,inputnumbersin“Path”and“Preset”.Click【AddPreset】toaddonepresetincruisepath,repeattoaddmorethanonepresets.Click【ClearPreset】todeleteapreset,repeattodeletemore.(clearpresetcannotbesupportedbysomeprotocols)
78/90
DIAGRAM6-7TOUR
【Pattern】setting:click【Pattern】,asDiagram6-8Pattern,recordtheprocessasPattern“X”,click【Begin】,backtoPTZcontrolmenutomodify【zoom】,【focus】and【IRIS】,etc.thenbacktobelowmenufor【Stop】
DIAGRAM6-8PATTERN
【Border】setting:Click【Border】,asDiagram6-9Border.Movecameratoleft/rightBoundarybydirectionkeyandclick【LeftBorder】and【RightBorder】toconfirmthesetting.
DIAGRAM6-9BORDER
79/90
6.4.2 CAMERASETTING
Click“PageSwitch”toenterthecamerasettinginterface.(Onlysupportpartprotocol)(Diagram6-10CameraSetting)【Enter】or【Exit】canaccessorquitthecamerasettingmenu.
Click“PageSwitch”tobacktointerfaceDiagram6-3PTZcontrol
Directionkeyismainlyusedtointernalmenucontroli.e.cameramenucontrol.Thebuttonindicatesaccordingtotheprotocol,suchas:shadowedbuttonmeansunsupported.Up/Downkeyshiftmenuitem,Left/Rightkeychangefunction.
DIAGRAM6-10CAMERASETTING
6.5 VOICEINTERCOM
6.5.1 SUMMARIZE
EmbeddedDVRBidirectionalTalk:usercantalktoremoteclientsoftwareorWebviaDVRaudioinputandoutputports;usercanlistenvoicefromClientSoftwareandWEBviaDVRaudiooutputports.
Twotypesofbidirectionaltalk----sharingandstandalone----fordifferentmodels,exactinfopleaserefertospecifications.
6.5.2 CONFIGURATION
Localconfiguration
ConnectamicrophonetotheMICinputport,connectloudspeakertotheaudiooutputport.
IfnostandaloneMICinputport,pleaseconnectmicrophonetothenumber1audioinputport
Note:localoutputneedsactiveaudiooutputdevice.
RemotePCConfiguration
80/90
Connectmicrophoneandloudspeakertocomputer.
EnablebidirectionaltalkinIMSsoftwareorWEB.
6.6 HDDREDUNDANCY
HDDredundancyfunctioncanbackuptherecordingfile,usercanretrievefilesbyHDDredundancyifsingleHDDdamaged,bywhichimprovethesystem’ssafety.
HarddiskredundancyfunctionisthroughthedesignatedchanneldatadoublebackupinHDD,soDVRneedastandaloneHDDforredundancyfunction.
HDDredundancyconfiguration
Openmainmenuenterintothestorageconfiguration,chooseoneHDDastheredundancyHDD,clicksetting.
RedundancyHDDmustbeanindependentHDD,usercansetseveralHDDsasaredundancyHDDgroup.OnceaHDDisassignedasredundancyHDD,therecordingdatacanbesavedinbothnormalHDDandredundancyHDD.
DataonredundancyHDDshouldbeautomaticallycyclecoverage,cycleperioddependsontherecordingdataandredundantHDD’scapacity.
Note:Makesure2pcsHDDatleastinDVR,oneforreadandwrite,anotherforredundancy.
Channelredundancyconfiguration
Usercanchoosepartchannelsorallchannelstosetredundancybackup.Pleasegetto【Configuration】→【Record】,chooseredundancychannel,checkmark【Redundancy】.
Note:thedatainchannelturnoffredundancyonlyisrecordedinnormalreadingandwritingHDDiftheredundancyisnotenabled.
RetrieveHDDredundancy
UsercanretrievebackuprecordingdatafromredundancyHDDwhenRWHDDdamageordatalost.Firstly,shutdownDVRandremovedamagedHDD,thenrestartDVR;
Secondly,Getinto【Mainmenu】→【Storage】,setredundancyHDDasareadingandwritingHDD,thenitcanbesearched.
6.7 HDDS.M.A.R.T
81/90
S.M.A.R.T:“Self-Monitoring,AnalysisandReportingTechnology”
S.M.A.R.THDDcananalysishead,disc,motor,circuitoperation,historyanddefaultsecurityvaluesviamonitorinstructioninHDDandsurveillancesoftwareinhost.Alarmwillbesenttouserautomaticallywhenthevalueisoutsidethescopeofthesecuritysituation.
DetectionparametersofSeagateHDDforexamplearedividedintoseven:IDdetectioncode,AttributeDescription,Threshold,AttributeValue,Worst,Date,andStatus.
1 IDdetectioncode
IDdetectioncodeisnottheonly;manufacturercanusedifferentIDcodeorincreaseordecreaseitsquantityaccordingtothedetectedparameter’squantity.
Forexample:theIDdetectioncodeofWEASTERNDIGITAL’sproductis“04”,parameterisStart/StopCount,buttheparameterofsamecodeinFujitsu’sproductis“Numberoftimesthespindlemotorisactivated”.
2 AttributeDescription
AttributeDescription:nameofdetectionitem.Manufacturercanincreaseordecrease.AsATAstandardupdateconstantly,sometimesdifferentmodelsinsamebrandmaybedifferent,butmustensuremajortestitemsspecifiedinS.M.A.R.T.(althoughdifferentmanufacturershavespecificnamingconvention,theessenceofmonitoringisthesame.)
1ReadErrorRate
2SpinupTime
4Start/StopCount
5RelocatedSectorCount
7SeekErrorRate
9Power-onHoursCount
10SpinupRetryCount
194Powertemperatures
195ECContheFlycount
197CurrentPendingSectorCount
198Disconnectionbeyondrepair
199CRCcyclicredundancycheck
82/90
200WriteErrorCount
Note:Differentmanufacturersanddifferentmodelshavedifferentattributedescription,userhasnoneedtoknowexactmeaning,attributedetectionvaluesenoughforthem.
3 Threshold
Itisspecifiedbymanufacturercalculatedthroughaspecificformula.Ifthereisaattributevalue lowerthanthethreshold,whichmeansHDDbecomeunreliableanddatastoredisveryeasytolose.CompositionandsizeofreliableattributevaluesisdifferentfordifferentHDD.Itshouldbenotedthat,ATAstandardonlyprovidessomeSMARTparameters;itdoesnotprovideaspecificvalue."Threshold"valueisdeterminedbymanufacturersbasedonproducts’features.Thus,resultstestedbymanufacturerprovideddetectionsoftwareisverydifferentfromtestingsoftwareunderWindows(suchasAIDA32)
4 AttributeValue
Attributevalueisthemaximumnormalvalue;thegeneralrangeisfrom1to253.Typically,themaximumattributevalueis100(forIBM,Quantum,andFujitsu)or253(forSamsung).Ofcourse,therearesomeexceptions,forexample,somemodelsproducedbyWesternDigitalhavetwodifferentattributevalues,andpropertyvalueisset200wheninitialproduction,butafterthenitischangedinto100.
5Worst
Worstvalueisthelargestnon-normalvalueinHDD’srunning.ItisavaluecalculateforHDD’scumulativerunning,itisconstantlyrefreshedaccordingtorunningcycle,andveryclosedtothethreshold.WhethertheHDDisnormalbyS.M.A.R.Tanalysisisbasedonthecomparisonwiththreshold.ThemaximumvalueappearwhennewHDDstarttouse,whichwouldcontinuetodecreasewiththeeverydayuseorerrorhappen.Consequently,largerattributevaluesmeanbetterqualityandhigherreliability;smallervaluesmeanmorepossibilityoffailureincreases.
6Dates
ActualvaluesofHDD’sdetectionitems,manyitemsarecumulativevalues.
7Status
ItiscurrentstatuesofHDD’severyattributeafteranalyzingandcomparingaboveattributevaluesbyS.M.A.R.T,alsoisimportantinformationtojudgeHDDhealthyornot.
Therearethreestatuses:Normal,AlarmandError----whichiscloselyrelatedwithPre-failure/advisoryBIT.
83/90
7 APPENDIX
7.1 TERMS
Dual-stream
Dual-stream:onehighbitratestreamforthelocalHDstore,QCIF/CIF/2CIF/DCIF/4CIFcoding,otherlowbitratestreamfornetworktransmission,suchasQCIF/CIFcoding,
IFrame
Iframe:intraframeimage,removeredundantinformationtocompressthetransmittaldata,alsocalledkeyframes.
BFrame
Bframe:Accordingtotimeredundantofthesourceimagesequencepreviouslyencodedframeandaccount thesourceimageaftertheencodedframetocompresstransmittaldata,alsoknownasbi-directionalpredictionframe.
PFrame
P-frame:accordingtoimageframelowerthantheprevious’timeredundanttocompresstransmittaldata,alsocalledpredictedframes.
WideDynamic
Brightpartsanddarkpartsinparticularcanbeseenveryclearlyatthesametime.Widedynamicrangeisaratiobetweenthebrightestluminancesignalvalueandthedarkestvalue.
S.M.A.R.T
SMART(SelfMonitoring,AnalysisandReportingTechnology):nowwidelyusedinharddiskdatasecuritytechnology,monitoringsystemanalysisMotor,circuit,HDDanddiskheadwhenHDDworking,warnwhenabnormality,sometimeswillautomaticallyslowdownandbackupdata.
CVBS
CompositeVideoBroadcastSignal,consistsofluminanceandcolorsignalfromthecompositebasebandsignal.
BNC
84/90
Coaxialcableconnector,compositevideosignalsoraudiosignals,commonlyuse75ohmconnectors.BNCweldingandshouldpayattentiontoweldstrengthandremoveburrs,orthesignalwireandshield’scontactwillleadtoasubstantialattenuationofsignalstrength
7.2 HDDCAPACITYCALCULATION
7.2.1 REFERENCEOFHDDCAPACITYCALCULATION
ThefirsttimeinstallDVR,pleasecheckiftheHDDhasinstalled.
ThecapacityoftheHDD
ThereisnolimitationofcapacityofsingleHDDtoDVR,pleasechoosetheHDDaccordingtotheVedios’savingtime.
ThechooseoftheCapacity
ComputationalformulaofHDDCapacity:
WholeHDDCapacity=numberofthechannels×timeinneed(hour)×spentofHDDCapacityperhour(MB/hour)
Similarlywecanhavetheformulaofrecordingtime:
annelAmountofChhrrHourcupationpeCapacityOcpacityTotalHDDCahourtimeR
=
)(
)()(
MB/MBecording
Note:1GB=1000MB,not1GiB=1024MiB,soHDDcapacityshowninBaseConfigurationunderHDDManagementlessthanrealmarked.
Filesizeperhour(CBR).
BitRate File BitRate File BitRate File
96k 42M 320k 140M 896k 393M
128k 56M 384k 168M 1.00M 450M
160k 70M 448k 196M 1.25M 562M
192k 84M 512k 225M 1.50M 675M
224k 98M 640k 281M 1.75M 787M
256k 112M 768k 337M 2.00M 900M
85/90
FORM7-1RECORDFILESIZE
FilesizeismoreunpredictablewhenVBRstyle,pleaserefertotherealsizeofrecordingfile.
7.2.2 HARDDISKPROBLEM
UseDetectionToolprovidedbytheHDDmanufacturertodetecttheFunctionofHDDtosolvedataproblem.
WerecommendSeagateandWesternDigital.
HowtodetectSeagateHDD
a)Getintowww.seagate.com, ClickSupport&DownloadsàchooseSeaTools,downloadtool,asDiagram7-1:
DIAGRAM7-1SEAGATEDOWNLOAD
b)Double-clicktoinstalldownloadedfile,clickinstalledfiletodetecttheHDDinformationonPC.
c)ChoosetheHDDfordetection(othermanufacturer’sharddisksuitabletoo).
HowtodetectWDCHDD
86/90
a)Getintowww.wdc.com,chooseWDsupport/download/SATA&SAS/WDCaviar/GP,downloadsoftwareasDiagram7-2WDDownload
DIAGRAM7-2WDDOWNLOAD
b)ClickIcontoharddiskdetectionafterdownloading.
c)Doubleclickharddeskindevicelist,asDiagram7-3WDDetection:
87/90
DIAGRAM7-3WDDETECTION
7.3 COMMONFAULTS
DVRstartupfailureorcontinuouslyreboot
Possiblereasons:
1. ThesystemhasbeendamagedfromabadDVRupdate.
2. ThereisaproblemwiththeDVRmainboarderror,pleasecontactsupplier.
3. ThereisanHDDerror. ReplacefaultyHDD.
Remotecontroldoesnotwork
Possiblereasons:
1. Checkforbatteriesinremotecontrol,especiallyPositiveandNegative;
2. Checkforbatteries’power;
3. Checkifremotereceiverisobscured;
3 CheckifDVRaddresscorrespondtotheremotecontroladdress.
DVRcannotcontrolPTZ
Possiblereasons:
1. RS-485cableconnectionerror,A,Bportsareinverselyconnected;
2. PTZdecoder,protocol,baudrate,addressareincorrect;
3. Parallelconnecta120ΩresistancetoresolvesignalreflexcausedbytoomanyPTZsontheline.
4. TheRS-485portonDVRisdefective
Blurredscreeninpreviewmode
Possiblereasons:
PleasemakesureyourcamerasmatchyourvideoformatselectedintheGeneralmenu. E.g.cameraisNTSCstandardbuttheDVRisPALstandard,thepreviewwouldbeblurred.
Blurredscreeninplaybackmodeorfailuretoplaybackrecords
Possiblereasons:
88/90
1. Procedureerror,reboottheDVR
2. HDDerror,testorchangeouttheHDD
3. DVRhardwarefailure,contactyourlocalsupplier
CannotconnectDVRthroughnetwork
Possiblereasons:
1,checkthephysicalnetworkconnectioniscorrect.
2,checktheDVRnetworkconfigurationparameters.
3,checkwhetherIPconflictsexistinnetwork.
Downloadrecordingcannotbeplayed
Possiblereasons:
1 Playerinstallationerror.
2 TheUSBorHDDdevicehasanerror.
3 DonotinstallgraphicsoftwarelaterthanDX8.1.
InternetExploreCrash
Possiblereasons:
CloseIEexplore,enterintothetoolbar
89/90
DIAGRAM7-4IETOOLBAR
Visit underInternetExplorer9.0
Possiblereasons:
InternetExplore9.0aboveversionvisit:Pleasechoosecompatiblemode.