Post on 03-Apr-2018
7/28/2019 Em79b Z-wave Tablet
1/2
Emdoor
Product OverviewZ-wave is a new RF-based, low cost, low power, high reliability, suitable for short distance wireless communication network
technology. Working Band is 908.42MHz (America)868.42MHz (Europe), use FSK (BFSK/GFSK) modulation, data transmission
rate is 9.6kbps-40kbps, signal coverage indoors is 30m, outdoor exceed 100m. Z-wave technology is the lowest power
consumption and lowest cost technology, it powerfully promote the low-rate wireless area network.
Specificationk
Android 4.1Support FLASH 10.3
Multi-language, support HTML5Z-WaveZ-wave chipset, support network communication
CPUAmlogic Cortex-A9 AML8726-M3 1.0GHz/dual core,
1.5GHz
Mali-400 MP GPU
Memory1G Mobile DDR3
8 GB8 GB/16 GB/32 GB optionalROM Flash
Support 16 GB on Micro SD slot (max 32 GB)
NetworkWi-Fi 802.11 b/g/n, Bluetooth 4.0, optional for ZigBee,
NFC, RFID
2G/3Goptional WCDMA/EVDO/TD-SCDMA,support
calling
Support USB switch to Ethernet
Dual CameraFront 0.3 MP, Back 2 MP (optional 5MP
LCD7" 8" 10" optional, 1024 x 600, HD IPS, multi-touch
panel
HardwareBuilt in 8/1.5W speaker x 2
Built in GPS
3 axis gravity acceleration sensor
Video Output1080p, mini-HDMI, support BMP, JPG, GIF, PNG
Audio outputHeadphone Jack, DC Jack
Port1xmini USB 1xSIM card, support SDHC/SDXC
BatteryLithium-ion polymer battery3.7V/4100MAH4-8hours
Dimension198 x 117 x 12.8mm
Z-Wave Product
FeaturesChipset/Module Z-wave chipset, 32K Flash,2K SRAM
RF Frequency 868.42MHz/908.42MHz
RX sensitivity 96kbit/s;40kbit/s
Receive Current 23mA (max)
EmissionCurrent
24mA (max)
Baud Rate 115200bps
Work range 30m (max)
Main Function
Z-Wave and MID data exchangethrough serial port, offer JAVA layer API
interface
Interrupt wake up function
Reserve external Debug interfaceMID through software control the reset
and power management of Z-Wave(hardware and software)
Applications
Smart home illumination and appliances control
Reading, such as power meter, water andgas meters
Public places probe
Fire Detection
Medical emergency call and sensing
EM79B Z-Wave Tablet
Emdoor Group Ltd., co. www.emdoor.com brian.zhong@emdoor.com Tel:+8613714788553
e:brian.z z
http://www.emdoor.com/mailto:brian.zhong@emdoor.comhttp://www.emdoor.com/mailto:brian.zhong@emdoor.com7/28/2019 Em79b Z-wave Tablet
2/2
Z-wave Intelligent Control
Applications
Emdoor EM79B Z-Wave tablet through the built-in Z-Wave module and peripherals carry the data acquisition,
data backhaul, data receive, and through the built in wireless module or 3G module send back the data to data
center. Z-wave can control the network equipment by remote control, and also can through the Internet control
the Z-wave network devices. It is widely used in smart home, hotel control system, agricultural automation and
etc.
Industrial Control Smart Meter ReadingPublic Places Probe
Advantages
Compliance with International Standard Protocols
Z-Wave chipset, frequency is 908.42MHz (America) ~868.42MHz (Europe), use FSK (BFSK/GFSK)
modulation.
Low Speed, Network short distance communication
Z-Wave tablet data transfer rate is 9.6 kbps to 40kbpssignal coverage indoor 30m, open ground exceeding
100m.
Low Consumption, Low Cosst
Z-wave technology is the lowest power consumption and lowest cost technology, it powerfully promote the
low-rate wireless area network.
Multistage Jump Networking
Z-Wave tablet have their own independent network address (HomeID and each node address
(NodeID)distribute by the control node(controller) and each network can hold max 232 slaves including the
controller node. Control node can have multiple, but only have a master controller. And all nodes in the
network was distributed by the master control node, the other control node just forward the command ofmaster control node.
Emdoor Group Ltd., co. www.emdoor.com brian.zhong@emdoor.com Tel:+8613714788553
e:brian.z z
http://www.emdoor.com/mailto:brian.zhong@emdoor.comhttp://www.emdoor.com/mailto:brian.zhong@emdoor.com