Post on 11-Jan-2016
1
ECE 477 Senior DesignAndroid Street Car
Packaging TCSP
Team 12Chun Ta Huang
2013/02/06
2
Project Abstract
• Our goal is to design a robot vehicle which can manually controlled by human with Android phone.
• The vehicle can capture images, sensing the surroundings, feedback the information to the phone and some other minor functions.
3
Packaging Constraints
• Size for the car : approx. 420x300x130mm• Weight : 2.5 kg• Wheels count: either 4 or 6• Each wheel has its motor• Share power source with the entire system• Car load : approx. 1.2 kg• Total Power consumption: approx. 5.13W• Heat Dissipation: mesh body have a better air flow,
and huge metal area help using heat sink to cool down
4
Analysis of packaging• Raspberry Rover
• http://www.youtube.com/watch?v=neiOY1Uy6g8&feature=youtu.be&t=7m20s
5
ComparisonAndroid Street Car Raspberry Rover
Microcontroller IPC1768 Arduino
Chassis Self-made based on our project user specification
Dagu Wild Thumper 6WD All –Terrain Chassis
Camera Front camera and360 degree camera
2 degree of freedom camera
Common Raspberry PI Raspberry PI
Other functions GPS, sensor None
6
Measured drawing of packaging
7
Measured drawing of packaging