Post on 14-Apr-2018
7/30/2019 E-lan Service Creation Guideline
1/15
FLEXI PACKET 5.0 GUIDELINES Page 1
FLEXI PACKET 5.0 E-LAN SERVICE CREATION GUIDELINES
7/30/2019 E-lan Service Creation Guideline
2/15
FLEXI PACKET 5.0 GUIDELINES Page 2
Requirements
Laptop/PC with LCT Installed
FPH with 5.0
Fair knowledge on the Flexi Packet Hub and LCT
7/30/2019 E-lan Service Creation Guideline
3/15
FLEXI PACKET 5.0 GUIDELINES Page 3
PHASE :1
The main purpose is to have the ability to create E-TREE services for aggregation sites , for
the 1819 SYNC service.
This will enable the aggregation port (UNI-SYNC port) to send the same v-lan 1819 to
multipoints ( UNI and NNI ports) E-tree services are point-to-multipoint services that are
used to provide IPTV and similar multicast services
The Hub must have the 5.0 software for the above to be possible, please the procedure
below if hub is not upgraded.
Upgrading Procedure
Step Task Command
1
Select one user of the FTP
server and copy the new
system software image
directly from the CD to the
FTP home directory of the
user.
If this is not possible, copy
the system software image
from the CD to a directory
from which the FTP serverallows file transfers
2
Verify that the FTP server
software is running on the
host computer and that the
correct software file is loaded
3Log in to the device
connecting by telnet
4
Download the software onto
the FPH x200 device.
ftp get image server-ip filename
login password
[account ] [cd-dir ]
all the command in a single line where:
The IP address of the FTP server in the
format A.B.C.D.
The name of the software image file on
the remote server. The file name can
contain up to 50 characters.
7/30/2019 E-lan Service Creation Guideline
4/15
FLEXI PACKET 5.0 GUIDELINES Page 4
The login name for the FTP server. The
login name can contain up to 30
characters.
The password for logging on to the FTP
server. The password string can contain
up to 30 characters
The name of the account on the FTP
server. The account name can contain up
to 30 characters. Default: .
The Change directory. The change
directory name can contain up to 80
characters. Default: .
The account and cd-dir arguments are no mandatory and
can be omitted if using the FTP home dir of the FTP user
For more information, see the example
5
Download the software to
the inactive image bank.
Type y when you are prompted to confirm the download.
The system will download the software file and unpack it into
the inactive image bank
This could take some minutes, depending of the load of the
network between the FTP server and the FPH A2200
6
Verify that the inactive bank
contains the new software
version.
show image command
8Toggle the active software
bank.
configset alternate-image-bank
9Reboot the device with thenew software.
Type y when you are prompted to confirm the toggling of the
active software bank.
10Log in to the device
connecting by telnet
11
After the reboot, verify that
the active bank contains the
new software version.
show image
7/30/2019 E-lan Service Creation Guideline
5/15
FLEXI PACKET 5.0 GUIDELINES Page 5
Examples
Example offtp get command:
This example downloads theA2200_V5.0.10.09.iimage from an FTP server on 10.20.30.4 using
username rootand password root:
A-2200> ftp get image server-ip 10.20.30.4 filename A2200_V5.0.10.09.i login root
password root
Example ofshow image command output:
This example shows software version 4.5.23.2 in the active image bank and software version
4.5.23.3 in the inactive image bank:
A-2200>showimage
BANK A BANK B
------------ ------------ ------------
Status Active Inactive
4.5.23.3 5.0.10.09
A-2200> configset alternate-image-bank
After this command the system will reboot
Run the show image command
A-2200>show
image
BANK A BANK B
------------ ------------ ------------
Status Active Inactive
5.0.10.09 4.5.23.3
N.B: If this is a new hub it can be upgraded from the commissiontool during the first time installation
7/30/2019 E-lan Service Creation Guideline
6/15
FLEXI PACKET 5.0 GUIDELINES Page 6
Phase:2 Creating the E-Tree service
There will be a new icon on the left hand side of the hubs menu from LCT
The icon is WEB UI (Web Use Interface)
Web UI- is a user-friendly, web-based element manager designed to manage the
A1200, A1210 and A2200 devices
Click on the icon to access the Web UI
Web UI can also be accessed by entering ip of the hub on internet explorer.
Click on WEBUI icon
7/30/2019 E-lan Service Creation Guideline
7/15
FLEXI PACKET 5.0 GUIDELINES Page 7
The screen above will appear on the internet explorer. Username : root
Password : root
7/30/2019 E-lan Service Creation Guideline
8/15
FLEXI PACKET 5.0 GUIDELINES Page 8
Select the Device manager Icon
From Device management a menu appears on the left. Click on Services from that menu
From Service there are two options. Click on Service management
On the service type click on: E-TREE
Click on the device
manager icon
Click on
SERVICES
Then Click on
Service
management
Click on E-TREE
7/30/2019 E-lan Service Creation Guideline
9/15
FLEXI PACKET 5.0 GUIDELINES Page 9
AC-NUM: Number of Attachment Circuits ( UNI ports)
NVI-NUM: Number of Network VLAN Interfaces (NNI ports)
The numbers of the AC and NVI will vary according to the planning.
Note that it is possible to have more than one UNI port in one E-Tree service
7/30/2019 E-lan Service Creation Guideline
10/15
FLEXI PACKET 5.0 GUIDELINES Page 10
Service ID- Service Identifier. Any number between 51-4094
S-VLAN ID 1819 for Vodafone SYNC (any other value can be used from 51-4094)
Leafs-VLAN ID - 1819 for Vodafone SYNC (any other value can be used from 51-4094)
PCS- Per Hop Behaviour Scheduling Class. The Options are EF1,EF2,AF2,AF3 Flooding-bw-profile- same as BW-profile that will be used for the service
Click on the creat bw-profile
7/30/2019 E-lan Service Creation Guideline
11/15
FLEXI PACKET 5.0 GUIDELINES Page 11
BW-Profile- The Bandwidth profile identification number
CIR-Committed Information Rate. The guaranteed bandwidth per connection according
to the SLA.
PIR Peak Information Rate. The peak rate of data transfer available on a connection.
All the values for the Band Width profile should come from planning
Click on Submit and a massage will appear below sayitng created or show if there are any
erros in the creation of the BW.
Click on
submit
7/30/2019 E-lan Service Creation Guideline
12/15
FLEXI PACKET 5.0 GUIDELINES Page 12
AC-type-The Role for the AC (UNI port). Choose between root and Leaf
SI-Service Interface-Will change depending on the number of port in the service.
I/F- The port/interface on the hub
SI-Instance- The instance in the service interface. Ing-bw-profile-Same as BW used on the service
Eg-bw-profile- Same as BW used on the service
All points marked with * are important and should therefore be filled
Click next
7/30/2019 E-lan Service Creation Guideline
13/15
FLEXI PACKET 5.0 GUIDELINES Page 13
Depending on the number of interface in the service the SI will change . If the service
involves 5 ports the it will have SI 1 up until 5
Si-Instance- will always stay the same through out the service
I/F- The next port/Interface in the service N.B : this screen will appear each time you click next depending on the number of port being
aggregated to. If its 1 port aggregating to 4 port the screen will appear 4 times.
Click Next
7/30/2019 E-lan Service Creation Guideline
14/15
FLEXI PACKET 5.0 GUIDELINES Page 14
Click on enable and then finish
A Screen will appear showing that the service has been created
If there are any errors on the creation of the service it will show where the errors are
If there are errors delete the service and start all the steps again
Click on
Enable
Click Finish
7/30/2019 E-lan Service Creation Guideline
15/15
FLEXI PACKET 5.0 GUIDELINES Page 15
Compiled By:
Lerato Dineo MokgadiNokia Siemens Care Engineer+27786592055Ghana:0204939633
dineo.mokgadi@nsn.com