Post on 20-Feb-2021
ConneCtion diagrams
dynaPCnPassenger and People Counter
Rev 1.5 - 27 October 2015 - DynaPCN_ConnDiag_1.5 ENGLISH
© 2014 Eurotech
TrademarksAll trademarks both marked and unmarked appearing in this document are the property of their respective owners.
Revision historyREVISION DESCRIPTION DATE
1.0 First release 20 March 20131.1 Minor revision 9 August 20131.2 Minor revision 27 November 20131.3 Added Order Code E14-35-12-00 3 July 20141.4 Update cable info for E14-35-10-00 28 August 20141.5 Update M12 connector information 27 October 2015
Table of contents DynaPCN - Connection diagrams
3
www.eurotech.comDynaPCN_ConnDiag_1.5
Table of contentsTrademarks ....................................................................................................................................................... 2Revision history ................................................................................................................................................ 2
Order Codes ....................................................................................................................................................... 4
Connections Schemes ...................................................................................................................................... 6DynaPCN 10-01-00 (RS485) ............................................................................................................................ 6
Single RS485 installation for development (with Development Kit) ............................................................. 6Wide-Gate RS485 installation for development (with Development Kit) ...................................................... 7Single RS485 installation in field .................................................................................................................. 8Wide-Gate RS485 installation in field ........................................................................................................... 9
DynaPCN 10-20-00 (ETH) .............................................................................................................................. 10Single ETH installation for development (with Development Kit) ............................................................... 10Wide-Gate ETH installation for development (with Development Kit) ........................................................ 11Single ETH installation in field .................................................................................................................... 12Wide-Gate ETH installation in field ............................................................................................................ 13
DynaPCN 10-20-01 (POE) ............................................................................................................................. 14Single POE installation for development (with Development Kit) ............................................................... 14Wide-Gate POE installation for development (with Development Kit) ....................................................... 15Single POE installation in field ................................................................................................................... 16Wide-Gate POE installation in field ............................................................................................................ 17
Order Codes in detail ...................................................................................................................................... 18DynaPCN 10-01-00: RS485 passenger and people counter .......................................................................... 18DynaPCN 10-20-00: Ethernet passenger and people counter ....................................................................... 19DynaPCN 10-20-01: POE passenger and people counter ............................................................................. 20E14-35-11-00 .................................................................................................................................................. 21E14-45-10-00 .................................................................................................................................................. 22E14-30-10-00 (POE/Ethernet cable) ............................................................................................................... 23E14-35-10-00 (Multifunction cable 2) .............................................................................................................. 24USB - MiniUSB cable ...................................................................................................................................... 25USB - RS485 cable ......................................................................................................................................... 26E14-35-12-00 (Multifunction cable 1) .............................................................................................................. 27AC PSU .......................................................................................................................................................... 28
DynaPCN - Connection diagrams Order Codes
DynaPCN_ConnDiag_1.54
DYPCN-10-01-00
DYPCN-10-20-00
DYPCN-10-20-01
E14-35-11-00
E14-45-10-00
E14-30-10-00
E14-35-10-00
E14-35-12-00
Order Codes
ORDER CODES DESCRIPTION PICTURE
1x DynaPCN 10-01-00: RS485 passenger & people counter
1x DynaPCN 10-20-00: Ethernet passenger & people counter
1x DynaPCN 10-20-01: POE passenger & people counter
1x Cable for: DynaPCN 10-01-00 power supply, Digital IN, RS485; L = 3.0 m
1x Cable for: DynaPCN 10-20-00 power supply, Digital IN; L = 3.0 m
1x POE/Ethernet cable; L = 3.0 m
1x Multifunction cable 2 (Power supply, Digital IN, Wide-Gate); L = 0.8 m
1x Multifunction cable 1 (Power supply, Digital IN, RS485); L = 0.4 m
Order Codes DynaPCN - Connection diagrams
DynaPCN_ConnDiag_1.55
www.eurotech.com
DYPCN-10-01-00-DK0
DYPCN-10-20-00-DK0
A
B
C
D
E
A
B
C
D
A
A
B
B
C
C
D
D
E
ORDER CODES DESCRIPTION PICTURE
Development kit for RS485 passenger & people counter.Content:
1x USB - MiniUSB cable; L = 3.0 m 1x USB - RS485 cable; L = 3.0 m 1x Multifunction cable 1 (Power supply, Digital IN, RS485); L = 0.4 m 1x Multifunction cable 2 (Power supply, Digital IN, Wide-Gate); L = 0.8 m 1x AC PSU
Development kit for Ethernet/POE passenger & people counter.Content:
1x USB - MiniUSB cable; L = 3.0 m 1x POE/Ethernet cable; L = 3.0 m 1x Multifunction cable 2 (Power supply, Digital IN, Wide-Gate); L = 0.8 m 1x AC PSU
DynaPCN - Connection diagrams Connections Schemes
DynaPCN_ConnDiag_1.56
Connections Schemes
DynaPCN 10-01-00 (RS485)
Single RS485 installation for development (with Development Kit)
ORDER CODE CONTENT
DYPCN-10-01-00 •1x DynaPCN 10-01-00: RS485 passenger & people counter
DYPCN-10-01-00-DK0 •1x USB - MiniUSB cable; L = 3.0 m•1x USB - RS485 cable; L = 3.0 m•1x Multifunction cable 1 (Power supply, Digital IN, RS485); L = 0.4 m•1x Multifunction cable 2 (Power supply, Digital IN, Wide-Gate); L = 0.8 m (*)•1x AC PSU
(*)Notusedinthisconfiguration
Digital IN
Master AC PSU
Multifunction cable 1
USB - RS485 cable Host PC
DynaPCN 10-01-00Master
USB - MiniUSB cable
Connections Schemes DynaPCN - Connection diagrams
DynaPCN_ConnDiag_1.57
www.eurotech.com
Wide-Gate RS485 installation for development (with Development Kit)
ORDER CODE CONTENT
DYPCN-10-01-00 •1x DynaPCN 10-01-00: RS485 passenger & people counter (master)
DYPCN-10-01-00 •1x DynaPCN 10-01-00: RS485 passenger & people counter (slave)
DYPCN-10-01-00-DK0 •1x USB - MiniUSB cable; L = 3.0 m•1x USB - RS485 cable; L = 3.0 m•1x Multifunction cable 1 (Power supply, Digital IN, RS485); L = 0.4 m•1x Multifunction cable 2 (Power supply, Digital IN, Wide-Gate); L = 0.8 m (*)•1x AC PSU (for the master)
EXTRA •1x AC PSU (for the slave)
Digital IN
Master AC PSU
Slave AC PSU
Multifunction cable 1
Multifunction cable 2
USB - RS485 cable Host PC
DynaPCN 10-01-00Master
DynaPCN 10-01-00Slave
USB - MiniUSB cable
DynaPCN - Connection diagrams Connections Schemes
DynaPCN_ConnDiag_1.58
Single RS485 installation in field
ORDER CODE CONTENT
DYPCN-10-01-00 •1x DynaPCN 10-01-00: RS485 passenger & people counterE-14-35-11-00 •1x Cable for: DynaPCN 10-01-00 power supply, Digital IN, RS485; L = 3.0 m
EXTRA •1x USB - MiniUSB cable; L = 3.0 m
Digital IN
E-14-35-11-00
Master PSURS485
DynaPCN 10-01-00Master
USB - MiniUSB cable
Setup
Host PC
Connections Schemes DynaPCN - Connection diagrams
DynaPCN_ConnDiag_1.59
www.eurotech.com
Wide-Gate RS485 installation in field
ORDER CODE CONTENT
DYPCN-10-01-00 •1x DynaPCN 10-01-00: RS485 passenger & people counter (master)
DYPCN-10-01-00 •1x DynaPCN 10-01-00: RS485 passenger & people counter (slave)
E-14-35-11-00 •1x Cable for: DynaPCN 10-01-00 power supply, Digital IN, RS485; L = 3.0 m
E-14-35-10-00 •1x Multifunction cable 2 (Power supply, Digital IN, Wide-Gate); L = 0.8 m
EXTRA •1x USB - MiniUSB cable; L = 3.0 m
Digital INSlave PSU
E-14-35-11-00
Master PSURS485
E-14-35-10-00
DynaPCN 10-01-00Master
DynaPCN 10-01-00Slave
USB - MiniUSB cable
Setup
Host PC
DynaPCN - Connection diagrams Connections Schemes
DynaPCN_ConnDiag_1.510
DynaPCN 10-20-00 (ETH)
Single ETH installation for development (with Development Kit)
ORDER CODE CONTENT
DYPCN-10-20-00 •1x DynaPCN 10-20-00: ETH passenger & people counter
DYPCN-10-20-00-DK0 •1x USB - MiniUSB cable; L = 3.0 m•1x POE/Ethernet cable; L = 3.0 m•1x Multifunction cable 2 (Power supply, Digital IN, Wide-Gate); L = 0.8 m•1x AC PSU
Digital IN
Master AC PSU
POE/Ethernet cable Multifunction cable 2
Ethernet DynaPCN 10-20-00Master
USB - MiniUSB cableHost PC
Connections Schemes DynaPCN - Connection diagrams
DynaPCN_ConnDiag_1.511
www.eurotech.com
Wide-Gate ETH installation for development (with Development Kit)
ORDER CODE CONTENT
DYPCN-10-20-00 •1x DynaPCN 10-20-00: ETH passenger & people counter (master)
DYPCN-10-01-00 •1x DynaPCN 10-01-00: RS485 passenger & people counter (slave)
DYPCN-10-20-00-DK0 •1x USB - MiniUSB cable; L = 3.0 m•1x POE/Ethernet cable; L = 3.0 m•1x Multifunction cable 2 (Power supply, Digital IN, Wide-Gate); L = 0.8 m•1x AC PSU (for the master)
EXTRA •1x AC PSU (for the slave)
DynaPCN 10-01-00Slave
Ethernet
Digital IN
Master AC PSU
Slave AC PSU
POE/Ethernet cable Multifunction cable 2
DynaPCN 10-20-00Master
USB - MiniUSB cableHost PC
DynaPCN - Connection diagrams Connections Schemes
DynaPCN_ConnDiag_1.512
Single ETH installation in field
ORDER CODE CONTENT
DYPCN-10-20-00 •1x DynaPCN 10-20-00: ETH passenger & people counter
E14-30-10-00 •1x POE/Ethernet cable; L = 3.0 m
E14-45-10-00 •1x Cable for: DynaPCN 10-20-00 power supply, Digital IN; L = 3.0 m
EXTRA •1x USB - MiniUSB cable; L = 3.0 m
Digital IN
Master PSU
DynaPCN 10-20-00Master
E14-30-10-00E14-45-10-00
Ethernet
USB - MiniUSB cable
Setup
Host PC
Connections Schemes DynaPCN - Connection diagrams
DynaPCN_ConnDiag_1.513
www.eurotech.com
Wide-Gate ETH installation in field
ORDER CODE CONTENT
DYPCN-10-20-00 •1x DynaPCN 10-20-00: ETH passenger & people counter (master)
DYPCN-10-01-00 •1x DynaPCN 10-01-00: RS485 passenger & people counter (slave)
E14-30-10-00 •1x POE/Ethernet cable; L = 3.0 m
E14-35-10-00 •1x Multifunction cable 2 (Power supply, Digital IN, Wide-Gate); L = 0.8 m
EXTRA •1x AC power supply (for the slave)
Digital IN
Slave PSU
Master PSU
E14-35-10-00
DynaPCN 10-20-00Master
DynaPCN 10-01-00Slave
E14-30-10-00
Ethernet
USB - MiniUSB cable
Setup
Host PC
DynaPCN - Connection diagrams Connections Schemes
DynaPCN_ConnDiag_1.514
DynaPCN 10-20-01 (POE)
Single POE installation for development (with Development Kit)
ORDER CODE CONTENT
DYPCN-10-20-01 •1x DynaPCN 10-20-00: POE passenger & people counter
DYPCN-10-20-00-DK0 •1x USB - MiniUSB cable; L = 3.0 m•1x POE/Ethernet cable; L = 3.0 m•1x Multifunction cable 2 (Power supply, Digital IN, Wide-Gate); L = 0.8 m•1x AC PSU (*)
(*)Notusedinthisconfiguration
Digital IN
POE/Ethernet cable Multifunction cable 2
POE DynaPCN 10-20-01Master
USB - MiniUSB cableHost PC
Connections Schemes DynaPCN - Connection diagrams
DynaPCN_ConnDiag_1.515
www.eurotech.com
Wide-Gate POE installation for development (with Development Kit)
ORDER CODE CONTENT
DYPCN-10-20-01 •1x DynaPCN 10-20-00: POE passenger & people counter
DYPCN-10-01-00 •1x DynaPCN 10-01-00: RS485 passenger & people counter (slave)
DYPCN-10-20-00-DK0 •1x USB - MiniUSB cable; L = 3.0 m•1x POE/Ethernet cable; L = 3.0 m•1x Multifunction cable 2 (Power supply, Digital IN, Wide-Gate); L = 0.8 m•1x AC PSU (for the slave)
DynaPCN 10-01-00Slave
POE
Digital IN
Slave AC PSU
POE/Ethernet cable Multifunction cable 2
DynaPCN 10-20-01Master
USB - MiniUSB cableHost PC
DynaPCN - Connection diagrams Connections Schemes
DynaPCN_ConnDiag_1.516
Single POE installation in field
ORDER CODE CONTENT
DYPCN-10-20-01 •1x DynaPCN 10-20-00: POE passenger & people counter
E14-30-10-00 •1x POE/Ethernet cable; L = 3.0 m
E14-45-10-00 •1x Cable for: DynaPCN 10-20-00 power supply, Digital IN; L = 3.0 m
EXTRA •1x USB - MiniUSB cable; L = 3.0 m
Digital IN
USB - MiniUSB cable
E14-45-10-00
Setup
Host PC
DynaPCN 10-20-01Master
E14-30-10-00
Ethernet
Connections Schemes DynaPCN - Connection diagrams
DynaPCN_ConnDiag_1.517
www.eurotech.com
Wide-Gate POE installation in field
ORDER CODE CONTENT
DYPCN-10-20-01 •1x DynaPCN 10-20-00: POE passenger & people counter
DYPCN-10-01-00 •1x DynaPCN 10-01-00: RS485 passenger & people counter (slave)
E14-30-10-00 •1x POE/Ethernet cable; L = 3.0 m
E14-35-10-00 •1x Multifunction cable 2 (Power supply, Digital IN, Wide-Gate); L = 0.8 m
EXTRA •1x AC PSU (for the slave)
Digital IN
USB - MiniUSB cable
Slave PSU
E14-35-10-00
Setup
Host PC
DynaPCN 10-20-01Master
DynaPCN 10-01-00Slave
E14-30-10-00
POE
DynaPCN - Connection diagrams Order Codes in detail
DynaPCN_ConnDiag_1.518
M2M1
A Power supply +B Power supply -C Digital IN 1 +D Digital IN 1 -E Digital OUT 1 V+F Digital OUT 1G Digital OUT 1 GNDH RS485_1 GNDJ RS485_1 +K RS485_1 -L ReservedM Reserved
A ReservedB ReservedC Digital OUT 2 V+D Digital OUT 2E Digital IN 2+F Digital IN 2-G Digital OUT 2 GNDH RS485_WG GNDJ RS485_WG +K RS485_WG -L ReservedM Reserved
Order Codes in detail
DynaPCN 10-01-00: RS485 passenger and people counter
CONNECTOR CHARACTERISTICS:Type: 12-pin male circular conn. P/N: Lumberg 031512
MATING CONNECTOR CHARACTERISTICS:Type: 12-pin female circular conn. P/N: Lumberg 032212
CONNECTOR CHARACTERISTICS:Type: 12-pin female circular conn. P/N: Lumberg 030512
MATING CONNECTOR CHARACTERISTICS:Type: 12-pin male circular conn. P/N: Lumberg 033212
PIN # SIGNAL PIN # SIGNAL
Order Codes in detail DynaPCN - Connection diagrams
DynaPCN_ConnDiag_1.519
www.eurotech.com
M2M1
1 ETH_TX+2 ETH_RX+3 ETH_TX-4 ETH_RX-
A Power IN +B Power IN -C Digital OUT 2 V+D Digital OUT 2E Digital IN 2 +F Digital IN 2 -G Digital OUT 2 GNDH RS485_WG GNDJ RS485_WG +K RS485_WG -L Digital IN 1 +M Digital IN 1 -
DynaPCN 10-20-00: Ethernet passenger and people counter
CONNECTOR CHARACTERISTICS:Tipo: 4-pin M12 female circular conn. P/N: Lumberg 0986EFC152
MATING CONNECTOR CHARACTERISTICS:Tipo: 4-pin M12 male circular conn. P/N: Conec 43-00161
CONNECTOR CHARACTERISTICS:Tipo: 12-pin female circular conn.P/N: Lumberg 030512
MATING CONNECTOR CHARACTERISTICS:Tipo: 12-pin male circular conn P/N: Lumberg 033212
PIN # SIGNAL PIN # SIGNAL
DynaPCN - Connection diagrams Order Codes in detail
DynaPCN_ConnDiag_1.520
M2M1
1 ETH_TX+2 ETH_RX+3 ETH_TX-4 ETH_RX-
A ReservedB ReservedC Digital OUT 2 V+D Digital OUT 2E Digital IN 2 +F Digital IN 2 -G Digital OUT 2 GNDH RS485_WG GNDJ RS485_WG +K RS485_WG -L Digital IN 1 +M Digital IN 1 -
DynaPCN 10-20-01: POE passenger and people counter
CONNECTOR CHARACTERISTICS:Tipo: 4-pin M12 female circular conn. P/N: Lumberg 0986EFC152
MATING CONNECTOR CHARACTERISTICS:Tipo: 4-pin M12 male circular conn. P/N: Conec 43-00161
CONNECTOR CHARACTERISTICS:Tipo: 12-pin female circular conn.P/N: Lumberg 030512
MATING CONNECTOR CHARACTERISTICS:Tipo: 12-pin male circular conn P/N: Lumberg 033212
PIN # SIGNAL PIN # SIGNAL
Order Codes in detail DynaPCN - Connection diagrams
DynaPCN_ConnDiag_1.521
www.eurotech.com
Con1
E14-35-11-00USE
• Supply power to DynaPCN 10-01-00
• Use the Digital IN lines
• Use the RS485 lines
DESCRIPTION
• FromCon1:12-pinFemalecircularconnector↔To7xrawwires
LENGHT
• 3.0 m
Connector detailsNAME CONNECT TO CONNECTOR TYPECon1 M1 of Master device 12-pin female circular connector; Lumberg 032212
Con1 pinoutPIN # SIGNAL TO WIRE PIN # SIGNAL TO WIRE
A Power IN + White H RS485_1 GND GreyB Power IN - Brown J RS485_1 + PinkC Digital IN 1+ Green K RS485_1 - BlueD Digital IN 1- Yellow
Pins not in table are not connected
7x Raw wires
Con 1 - Female connector
DynaPCN - Connection diagrams Order Codes in detail
DynaPCN_ConnDiag_1.522
Con1
E14-45-10-00
4x Raw wires
USE
• Supply power to DynaPCN 10-20-00
• Use the Digital IN lines
DESCRIPTION
• From4xrawwires↔ToCon1:12-pinMalecircularconnector
LENGHT
• 3.0 m
Connector detailsNAME CONNECT TO CONNECTOR TYPECon1 M2 of Master device 12-pin male circular connector; Lumberg 033212
Con1 pinoutPIN # SIGNAL TO WIRE PIN # SIGNAL TO WIRE
A Power IN + White L Digital IN 1+ GreenB Power IN - Brown M Digital IN 1- Yellow
Pins not in table are not connected
Con 1 - Male connector
Order Codes in detail DynaPCN - Connection diagrams
DynaPCN_ConnDiag_1.523
www.eurotech.com
Con1 Con2
E14-30-10-00 (POE/Ethernet cable)
Connector detailsNAME CONNECT TO CONNECTOR TYPECon1 POE / Ethernet network soket
NOTE: If the network is POE, Con1 also powers the DYPCN-10-20-01
Male RJ45 connector
Con2 M1of Master device 4-pin M12 male circular connector
Con2 pinoutPIN # SIGNAL PIN # SIGNAL
1 ETH_TX+ 3 ETH_TX-2 ETH_RX+ 4 ETH_RX-
USE
• Connect the DynaPCN 10-20-0x to the POE/Ethernet network
• Supply power to DynaPCN 10-20-01
DESCRIPTION
• FromCon1:RJ45maleconnector↔ToCon2:4-pinM12malecircularconnector
LENGHT
• 3.0 m
Con 2 - Male connectorCon 1 - Male connector
DynaPCN - Connection diagrams Order Codes in detail
DynaPCN_ConnDiag_1.524
Con1
Con2
Con3
E14-35-10-00 (Multifunction cable 2)USE
• Supply power to DynaPCN 10-20-00
• Use the Digital IN lines
• Supply power to the Slave device (Wide-Gate only)
• Connect Master and Slave devices together (Wide-Gate only)
DESCRIPTION
• FromCon1:12-pinMalecircularconnector↔ToCon2:6-wayscrewnylonterminalblock+Con3:12-pinfemale circular connector
LENGHT
• 0.8 m
Connector detailsNAME CONNECT TO CONNECTOR TYPECon1 M2 of Master device 12-pin male circular connector; Lumberg 033212Con2 DynaPCN 10-20-00 power supply
Digital IN lines6-way screw nylon terminal block; RS Components 492-8687
Con3 M1 of Slave device 12-pin female circular connector; Lumberg 032212
Con2 pinoutPIN # SIGNAL CONNECTED TO PIN # SIGNAL CONNECTED TO
1(A) Power IN + Con1 – Pin A 4 (B) Digital IN 1- Con1 – Pin M2 (A) Power IN - Con1 – Pin B 5 Power IN + Con3 – Pin A3 (B) Digital IN 1+ Con1 – Pin L 6 Power IN – Con3 – Pin B
(A) Use only with DynaPCN 10-20-00 (B) Use only with DynaPCN 10-20-00 and DynaPCN 10-20-01
Con 3 - Female connectorCon 2 - Terminal BlockCon 1 - Male connector
Order Codes in detail DynaPCN - Connection diagrams
DynaPCN_ConnDiag_1.525
www.eurotech.com
Con1 Con2
5 4 3 2 14 3 2 1
USB - MiniUSB cable
Connector detailsNAME CONNECT TO CONNECTOR TYPECon1 USB port of Host PC Male USB type “A” connectorCon2 Mini-USB port of DynaPCN 10-20-0x Male Mini-USB type “B” connector
USE
• Connect the DynaPCN to the Host PC
DESCRIPTION
• FromCon1:MaleUSBtype“A”connector↔ToCon2:MaleMini-USBtype“B”connector
LENGHT
• 3.0 m
Con 2 - Male connectorCon 1 - Male connector
DynaPCN - Connection diagrams Order Codes in detail
DynaPCN_ConnDiag_1.526
Con1
4 3 2 1
Con2
1
USB - RS485 cableUSE
• Connect the USB port of the Host PC to Cn2 of the Multifunction cable 1
DESCRIPTION
• FromCon1:MaleUSBtype“A”connector↔ToCon2:MaleDB9connector
LENGHT
• 3.0 m
Connector detailsNAME CONNECT TO CONNECTOR TYPECon1 USB port of Host PC Male USB type “A” Con2 Con3 of the Multifuncion Adapter 1 Male DB9
Con2 pinoutPIN # SIGNAL
1 Data -2 Data +5 Ground
Con 2 - Male connector Con 1 - Male connector
Order Codes in detail DynaPCN - Connection diagrams
DynaPCN_ConnDiag_1.527
www.eurotech.com
Con1
Con2
1
Con3
Con4
E14-35-12-00 (Multifunction cable 1)USE
• Supply power, the Digital IN lines and the RS485 lines to the DynaPCN 10-01-00
DESCRIPTION
• From Con1: 2-way screw nylon terminal block + Con2: 3-way screw nylon terminal block + Con3: female DB9connector↔ToCon4:12-pinfemalecircularconnector
LENGHT
• 0.4 m
Connector detailsNAME CONNECT TO CONNECTOR TYPECon1 Power supply 2-way screw nylon terminal blockCon2 Digital IN lines 3-way screw nylon terminal blockCon3 RS485 Female DB9 connectorCon4 M1 of DynaPCN 10-01-00 12-pin female circular connector
Con4 pinoutPIN # SIGNAL CONNECTED TO PIN # SIGNAL CONNECTED TO
A Power IN + Con1 – Pin 1 F Not Connected -
B Power IN - Con2 – Pin 2 D Digital IN1 - Con2 – Pin 3
J RS485_1 + Con3 – Pin 2 G Not Connected -
K RS485_1 - Con3 – Pin 1 E Not Connected -
H RS485_1 GND Con3 – Pin 5 L Power supply + (*) Con1 – Pin 1
C Digital IN1 + Con2 – Pin 1 M Power supply - (*) Con1 – Pin 2 (*) for slave device
Con 3 - Female connectorCon 2 - Terminal blockCon 1 - Terminal block Con 4 - Female connector
DynaPCN - Connection diagrams Order Codes in detail
DynaPCN_ConnDiag_1.528
AC PSUUSE
• Supply power to DynaPCN 10-01-00 / DynaPCN 10-20-00
DESCRIPTION
• AC power supply
Notes
EUROPE
ITALY
EUROTECH Tel: +39 0433.485.411 Fax: +39 0433.485.499 E-mail: sales.it@eurotech.com E-mail: support.it@eurotech.com Web: www.eurotech.com
UNITED KINGDOM
EUROTECH Tel: +44 (0) 1223.403410 Fax: +44 (0) 1223.410457 E-mail: sales.uk@eurotech.com E-mail: support.uk@eurotech.com Web: www.eurotech.com
FRANCE
EUROTECH Tel: +33 04.72.89.00.90 Fax: +33 04.78.70.08.24 E-mail: sales.fr@eurotech.com E-mail: support.fr@eurotech.com Web: www.eurotech.com
AMERICAS
USA
EUROTECH Toll free: +1 888.941.2224 Tel: +1 301.490.4007 Fax: +1 301.490.4582 E-mail: sales.us@eurotech.com E-mail: support.us@eurotech.com Web: www.eurotech-inc.com
P T F E E W
ASIA
JAPAN
ADVANET Tel: +81 86.245.2861 Fax: +81 86.245.2860 E-mail: sales@advanet.jp E-mail: tsupport@advanet.jp Web: www.advanet.jp
WORLD SUPPORT
HEADQUARTERS
EUROTECH Via Fratelli Solari, 3/a 33020 Amaro (UD) – Italy Tel: +39 0433.485.411 Fax: +39 0433.485.499 E-mail: support.it@eurotech.com Web: www.eurotech.com
For your local contact please refer to: www.eurotech.com/contacts
Specifications and features are subject to change without notice. All trademarks and trade names are the property of their respective owners.