Dtc antimatter power generation

Post on 07-Jul-2015

107 views 8 download

Tags:

description

DVC TALENT CHOMPIONSHIP @13

Transcript of Dtc antimatter power generation

DVC TALENT CHOMPIONSHIP @13 Clean Power From Green Power

Group members-

R. Bhattray, GET, TSC-IV (Team leader)

Sunny Kumar, GET, CCD

Power infrastructure in India Present power demand in India -300 Gw (400 Gw

installed capacity)

However present installed capacity is only 200 Gw (130 Gw gen. capacity)

Coal based thermal power contributes 62 % of total installed capacity

Do we need other sources of energy? Why?

Pollution ? Power demand?

At a present rate of consumption, coal in India is expected to be last for 100 years only.

We need another source of energy which is reliable and efficient …

ANTIMATTER POWER GENERATION Give the Planet a chance

A Patent application in the University of California

Overview…. It’s a new technology to produce Electricity almost

from any matter (even water) based on concept of antimatter….

No pollution….as there is no use of coal or oil

Generating capacity…in the range 100Gw

Low maintenance cost…as there is no rotating part in the Generator.

Introduction to Antimatter

According to Einstein..

E=mc2

If we convert 1Kg of water….

E=1x(3x10^8)^2= 90,000,000,000,000,000 joules

Can all this energy really be released?

Has it ever been? Why?

What is antimatter….?Matter Antimatter

Electron (e-) Positrons (e+)

Proton (P+) Antiproton(p-)

Neutron Anti-neutrons(pions): 0 charge

opposite magnetic field

Same mass…

Obey the same physical laws…

.

Production of antimatter…The European Organization for Nuclear Research (CERN)

Uses of antimatter.. Antimatter in Spacecraft….

Power generation…

PET(Positron Emission Tomography) in hospital….

Antimatter weapons..

Power generation

Principle…. Photons production by the stimulation of atoms With

electric discharges

Photons amplification by population inversion of excited atoms

Particle-antiparticle production by the collision of photons

Electron-positron avalanches within conducting materials

Separation of electron-positron pairs by the crossing of strong electromagnetic

Phenomena know as Electricity.

Physical Description… Self reflecting chamber

Cooling chamber-air/water..

Ferromagnetic core..

Ferromagnetic core leg..

Collecting chamber-copper/lead/steel

Electric coil

Self reflecting chamber

1. Cylinder

2. Two end lids

3. Pair of electrodes

Cylinder is electrically insulated..not to interfere with high voltage discharge needed for start.

Internal surface is highly reflective…

Lasing medium…solid/liquid/gas/plasma or any lasing medium

Cooling Chamber… An empty chamber…

Air/Water cooling…

To extract excess heat produces in self reflective chamber

Ferromagnetic core High magnetic permeability …

High inductance..

Low inherent losses…

Ferro magnetic leg- laminated

-no air gape or change of materials

-Strong magnetic field of 2-10T

Collecting chamber Good conductor of electricity….copper/led/steel

…..liquid/gas

…Dielectrically insulated

Electric coil- Placed at each end of ferromagnetic legs.

-Coils are star connected

3 phase A.C. connected to 1 set of coil which will produce rotating magnetic field.

The ion pairs coming out of Self reflective chamber will be separated by rotating magnetic field in opposite directions.

The direction of charged particles changes in every half cycle of A.C supply.

Frequency of out put voltage-frequency of A.C supply

Out put voltage and power very with rate of input of lasing medium.

Advantages and disadvantageNo pollution..

Greater efficiency..

Capacity in GW…

No separate control needed like in thermal power plant for Boiler, turbine, generator…

Energy from antimatter could be so economical, that it will be cheaper to SAVE THE PLANET than to destroy it.

4.5 million dollars for equipment..

270 million dollars for construction.

Thanks