Post on 08-Mar-2020
Drawing – SetupIntro
Using Autodesk Inventor
3/24/2014 Inventor - Drawing Setup Intro -jcS
1.INITIALIZATION
3/24/2014 Inventor - Drawing Setup Intro -jcS
a. Startup
Inventor Projects (Verify)
Project Name:
Other
3/24/2014 Inventor - Drawing Setup Intro -jcS
b. New Drawing
NewEnglish
ANSI(in).idw
3/24/2014 Inventor - Drawing Setup Intro -jcS
c. Drawing Layout
Note: oC (17in.x22in).
oDrawing Area vs. Titleblock
oResources
oFormats
oBorders
oTitleblocks
oSheets
3/24/2014 Inventor - Drawing Setup Intro -jcS
2. STANDARD ITEMS
3/24/2014 Inventor - Drawing Setup Intro -jcS
a. Drawing - iProperties
Drawing
<RMB> ipropertiesoGeneral
oSummary
oProject
oStatus
oCustom
oSave
3/24/2014 Inventor - Drawing Setup Intro -jcS
b. iProperties - Summary
Drawing
<RMB> iProperties - Summary oTitle
oAuthor
oCompany
3/24/2014 Inventor - Drawing Setup Intro -jcS
c. iProperties - Project
Drawing
<RMB> iProperties - Project oPart Number (File name)
oCreation Date
3/24/2014 Inventor - Drawing Setup Intro -jcS
d. iProperties - Status
Drawing
<RMB> iProperties - Project oChecked By
oChecked Date
3/24/2014 Inventor - Drawing Setup Intro -jcS
3. SAVE
3/24/2014 Inventor - Drawing Setup Intro -jcS
a. Save
SaveWorkspace
File name:
Save as type
3/24/2014 Inventor - Drawing Setup Intro -jcS