Post on 10-Jul-2020
DoD Business Rules for the
Synchronized Predeployment and
Operational Tracker (SPOT)
9/25/2019
DoD Business Rules for the Synchronized Predeployment and
Operational Tracker(SPOT)
1
AMENDMENT HISTORY
Document
Version
Approval
Date Modified By Section, Pages(s); Text Revised
1.0 1/21/2014 N/A Original
2.0 11/21/2014 SPOT PMO Compliance, 3/4; Updated publication dates and
removed rescinded DFARS Clause
252.225.7039
Updated Government Furnished Services
(GFS) to Authorized Government Services
(AGS) throughout the document
KO Business Rules / Approve and Sign the LOA,
12; Added a requirement for a review and approve or
denial of an LOA
CA Business Rules, 13; Modified the
requirements for creating a Foreign
Identification Number (FIN)
CA Business Rules / Deployment Dates, 13;
Added a requirement to modify the estimated
start date or cancel the deployment in certain
circumstances
CA Business Rules / Countries to be Visited,
13; Changed the rule for Countries to be
Visited
CA Business Rules / Complete Eligibility
Requirements and Establish Deployment
Itinerary, 15; Added a requirement to update
weapon information
Appendix 1: Abbreviations, 19; Updated
Abbreviations as necessary
Appendix 2: Definitions, 22; Removed
Dependents Authorized and Fuel
Authorized
Appendix 3: Sample LOA, 26; Replaced
3.0 2/2/2015 SPOT PMO CA Business Rules/ 12; Added new FIN
rules procedure
4.0 2/20/2015 SPOT PMO Compliance/ Updated with updated CENTCOM
Class Deviation 2015-O0009 / pg. 4
CA Business Rules/ Inserted new
mandatory guidance for the visa
4.1 2/25/2016 SPOT PMO NOTE on AFRICOM Class Deviation 2016- O0006 20160222 pg. 9
DoD Business Rules for the Synchronized Predeployment and
Operational Tracker(SPOT)
2
Document
Version
Approval
Date Modified By Section, Pages(s); Text Revised
4.2 1/1/2017 SPOT PMO
Policy and Web link updates
4.3 9/27/17 SPOT PMO
Release of Deviation 2017-O004, supersedes
Class Deviation 2015-O0009
4.4 2/5/18 SPOT PMO
Update to include the new GUID (replaces the FIN
on LN/TCN deployments) requirement Update to
reference the DD-2875 requirement for all
Contractors requesting a Government role, pg. 16.
4.5 5/10/18 SPOT PMO
Amend the SPOT Business Rules to reflect the
USFOR-A requirement that SPOT data for
Afghanistan deployments be affirmed in SPOT by
Company Admins every 30 days, pg. 17 & pg. 19.
4.6 9/25/19 SPOT PMO
Updated the SPOT Business Rules to reflect the
requirement for Company Admins to update Duty
Station Check In Dates within 1 day of employee
arriving at new duty station, pg. 18 & pg. 21. Added
Class Deviation 2018-O0019, “Class Deviation:
Contractor Personnel Performing in Japan”, pg 7.
DoD Business Rules for the Synchronized Predeployment and
Operational Tracker(SPOT)
3
PURPOSE
This document facilitates the implementation of the Synchronized Predeployment and
Operational Tracker (SPOT) as the federal government database for the tracking and
accountability of contractor personnel and equipment during contingencies, by defining the
SPOT procedures and policies (“who” does “what” and “why”) for all Department of Defense
(DoD) SPOT users. 1
This document provides an overview of the compliance requirements for
SPOT, defines the roles, responsibilities and business rules for using the system, and the
requirements to input and update information within the system. Instructions on how to operate
the system and a system overview are contained in the applicable SPOT user manuals located
on the Resource Center in SPOT at https://spot.dmdc.mil.
VALUE OF SPOT
SPOT is the central authoritative repository for applicable DoD contracts, contractor
personnel, and contract equipment as defined by the Congressional Acts and DoD
regulations listed in the Compliance section below. SPOT delivers a standard,
collaborative method for the management, tracking and visibility of contractor
personnel and contracts in support of contingencies, humanitarian assistance, disaster
recovery operations, and other military operations or military exercises, when
designated by the Combatant Commander (CCDR). It provides a centralized means to
identify the Department’s reliance and dependence on contracted capabilities.
Additionally, SPOT offers fidelity and visibility of existing and previously contracted
support, so that planners and others may consider current and historical data when
developing future total force structure requirements as well as logistics and operational
plans across all phases of operations.
Current systems receiving data from SPOT:
The Joint Personnel Accountability Reconciliation and Reporting System
(JPARR) receives SPOT data daily on DoD contractors deployed
worldwide.
Global Combat Support System – Joint (GCSS-J) receives SPOT data daily on
DoD contractors deployed worldwide, to include Authorized Government
Services (AGS) for each deployment.
Deployed Theater Accountability System (DTAS) receives SPOT data five days a
week on DoD contractors deployed to CENTCOM.
1 DOS and USAID follow their own SPOT Business Rules. Those USG agencies that are not directed by
policy to use SPOT are highly encouraged to use these Business Rules or develop their own, as applicable.
DoD Business Rules for the Synchronized Predeployment and
Operational Tracker(SPOT)
4
Contractor Debt System (CDS) receives SPOT data monthly from AFCENT,
which is provided Excel reports generated by SPOT, on the number of meals
consumed at Dining Facilities (DFAC) in the CENTCOM AOR.
Theater Medical Data Store (TMDS) receives SPOT data quarterly and upon
request from the Defense Finance and Accounting Service (DFAS), which is
provided Excel reports generated by SPOT, on the contractors who have
received treatment at military medical facilities.
In addition to providing the foundation for operational contract support planning,
SPOT enables functional oversight and integration of all contracted capabilities by:
Facilitating collaboration between diverse, geographically separated communities—
requiring activities, theater and Joint Task Force (JTF) staffs, Contracting Officer
Representatives (CORs), contracting offices, and contractor companies—in
collecting and sharing information.
Promoting synchronization and integration among all government partners.
Providing awareness, visibility and accountability of individual contingency
contractor personnel and contracted capabilities.
Historic SPOT records also provide a wealth of useful information that can be used for resolving
or clarifying issues, locating and correlating individuals to contract information, providing points
of contact for routine actions and emergency situations, supporting audits and congressional
inquiries, assessing past performance, and informing future requirements and sourcing decisions.
COMPLIANCE (REQUIREMENTS FOR SPOT)
Due to the increased awareness that contracted support is a force multiplier in contingencies,
Congress has passed legislation and the DoD has developed regulations, policies and
directives, to ensure that all personnel supporting contingencies (from the Combatant
Command (COCOM) inclusive to the company administrator personnel) enter and maintain
proper data in SPOT. On 25 January 2007, the Office of the Secretary of Defense
designated SPOT as the central repository for information on Contractors Authorized to
Accompany United States Forces (CAAF) in a memo titled, “Designation of SPOT as
Central Repository for Information on Contractors Deploying with the Force.”
Subsequently, the following legislation and DoD guidance has been issued:
Section 861 of the FY2008 National Defense Authorization Act: Requires the DoD,
Department of State (DOS), and United States Agency for International Development (USAID)
to identify a common database to serve as a repository of information on contracts and
contractor personnel in Iraq and Afghanistan. In July 2008, DoD, DOS, and USAID signed a
Memorandum of Understanding (MOU), updated in Feb 2010, in which they agreed to use
DoD Business Rules for the Synchronized Predeployment and
Operational Tracker(SPOT)
5
SPOT as the repository for information on all contracts valued over $100,000 and contractor
personnel deployed for more than 30 days.
Section 862 of the FY2008 National Defense Authorization Act: Requires the DoD and DOS to
establish a process for registering, processing and accounting of personnel performing private
security functions in an area of combat operations; authorizing and accounting for weapons to be
carried by personnel performing private security functions in an area of combat operations; and a
process for registering and identifying armored vehicles, helicopters and other military vehicles
operated by contractors performing private security functions in an area of combat operations.
Office of the Under Secretary of Defense Memorandum, dated 28 Jan 08: Requires that all
contractors employed on DoD funded contracts being performed in support of contingency
operations anywhere in the world be input to SPOT by 30 Sep 08.
DoD Instruction 3020.50, 22 Jul 09, Private Security Contractors: Requires that geographic
Combatant Commanders publish guidance and procedures for the registration and identification
of armored vehicles, helicopters, and other vehicles operated by private security personnel in
SPOT.
Section 813 of the FY2010 National Defense Authorization Act: Revises the definitions of
contracts in Iraq and Afghanistan to include Grants and Cooperative Agreements.
CJCSM 3150.13C, 10 Mar 10, Joint Reporting Structure – Personnel Manual: Identifies
SPOT as the central repository for all DoD funded contractors (United States, local
national, host nation, and third country national) data and identifies it as the source of DoD-
funded contractor Joint Personnel Status Report (JPERSTAT)- type information for a
geographical combatant commander.
DoD Instruction 3020.41, dated 20 Dec 11, Operational Contract Support (OCS): Requires that
in applicable contingency operations, contractor visibility and accountability shall be
maintained through a common joint database, i.e., the Synchronized Predeployment and
Operational Tracker (SPOT) or its successor. Additionally, it requires that all mandatory data
must be entered into SPOT or its successor before a contractor employee is permitted to deploy
to or enter a military theater of operations. Contracting officers, through the terms of the
contracts, shall require contractors to enter by-name data before an employee’s deployment and
to maintain and update the information in SPOT or its successor.
DFARS Clause 252.225-7040, Contractor Personnel Supporting U.S. Armed Forces Deployed
Outside the United States: Requires contractor companies to use SPOT to enter all applicable
data on contracted personnel before deployment and maintain data for all contractor personnel
that are authorized to accompany U.S. Armed Forces deployed outside the United States. It
further requires contractor personnel to have a SPOT-generated Letter of Authorization (LOA)
signed by the Contracting Officer in order to process through a deployment center or to travel
to, from, or within the designated operational area. The LOA identifies authorizations,
DoD Business Rules for the Synchronized Predeployment and
Operational Tracker(SPOT)
6
privileges, or Government support that Contractor personnel are entitled to under the specific
contract for which they are deployed.
DFARS Class Deviation 2013-O0017, Contractor Demobilization: Allows contractors to
request an extension of a SPOT deployment LOA for up to 30 calendar days past the contract
end date for those contractor personnel in Afghanistan whose presence is required to execute
an approved demobilization plan. This clause also requires contractors to close out their
employee deployments with the proper status in SPOT within 72 hours of their employee’s re-
deployment and, if applicable, release their personnel in SPOT.
DFARS Class Deviation 2017-O0004, Contractor Personnel Performing in the United States
Central Command Area of Responsibility: Requires all contractor personnel who travel to,
from or within the CENTCOM AOR to have a SPOT-generated LOA. Provides guidance
that all contractors use SPOT to account for all contractors authorized to accompany the
force (CAAF) and Non-CAAF within the CENTCOM AOR. Requires contractors populate
the in-theater arrival date (ITAD) and closeout date, changes to status and duty location in
accordance with the SPOT Business Rules. Provides instructions on how to register for
SPOT. This class deviation rescinds and supersedes Class Deviation 2015-O0009.
CENTCOM Clause 5152.247-5900, Inbound/Outbound Cargo and Contractor Equipment
Census: Requires contractors to input inbound cargo and equipment valued greater than
$50,000 in SPOT.
VISA USA001528-15-DPAP: Requires company administrators to enter visa details in SPOT
when a work visa is required for a contractor employee to perform in a particular country.
JOINT Publication 1-0, Joint Personnel Support, 31 May 2016: Section 3.b (7): For
contractors authorized to accompany the force (CAAF), the link to the deployment is
established by a government contracting officer (or designee) issued LOA generated through
SPOT. The LOA is required for CAAF to process through; to travel to, from, and within the
AOR/JOA; and to identify any additional authorizations, privileges, or government support
entitled under the contract. The J-1 should coordinate with component personnel officers and
the J-4 to ensure that contract LOAs reflect GCC requirements and that LOAs are required at
all vetting points processing CAAF. Section 6.d.(4): Contractors are required to comply with
HN or destination country laws and regulations regarding visa and passport requirements.
U.S. citizens and third- country national contractors entering the AOR or JOA will have this
information documented in SPOT as required. Appendix G, Section 3.d: All CAAF personnel
are required to carry a barcoded LOA, issued through SPOT, which allows them access to,
travel within, and departure from the AOR outside the US.
Class Deviation 2016-O0008, “Contrac tor Pe rsonne l Pe rforming in Unite d Sta te s Af rica
Comma nd Area of Re sponsibility” 22 Fe bruary 2016 . The USAFRICOM Commander has
identified a need to utilize the Synchronized Predeploymnet and Operational Tracker (SPOT) to
DoD Business Rules for the Synchronized Predeployment and
Operational Tracker(SPOT)
7
identify contractors employed under all contracts performed in their area of responsibility,
regardless of length of performance or contract value, during all operational phases (including
Phase 0), and not limited to contracts in support of declared contingency operations. This clause
facilitates enforcement of the USAFRICOM Commander’s requirement.
Class Deviation 2014-O0016, “ Contrac tor Pe rsonne l Pe rforming in the Unite d Sta te s Southe rn
Comma nd Area of Re sponsibility” 06 Octobe r 2014 . U.S. citizen and third country national (TCN)
contractor personnel must have a Synchronized Predeploymnet and Operational Tracker (SPOT)
generated letter of authorization signed by the contracting officer in order to travel to, from or
within the USSOUTHCOM AOR. The letter of authorization also will identify any additional
authorizations, privileges, or Government support to which Contractor personnel are entitled under
this contract.
EUCOM Task Order: “Contractor Personnel Performing in United States Europe Command
Area of Responsibility” October 2009. Expanded requirement for SPOT data entry and SPOT
LOA to Kosovo, Israel, Georgia, Azerbaijan and Armenia.
Class Deviation 2018-O0019, “Class Deviation – Contractor Personnel Performing in Japan”
30 August 2018. The deviation clause requires DoD contractors to account for contractor
personnel and dependents in the Synchronized Predeploymnet and Operational Tracker
(SPOT), in order for the contractor personnel and dependents to be eligible for coverage under
the SOFA.
For further details on these policy references as well as COCOM specific policy requirements
on the use of SPOT and Joint Asset Movement Management System (JAMMS) within their
AOR, go to http://www.acq.osd.mil/log/PS/policies.html .
DoD Business Rules for the Synchronized Predeployment and
Operational Tracker(SPOT)
8
SPOT ACTIVITY FLOW
Figure 1 illustrates the activity flows and the activity owners responsible for executing
each SPOT activity. The activities are described in detail below (for ease of
understanding, the activities are grouped under predeployment, deployment, and
redeployment corresponding to the SPOT system functionality).
DoD Business Rules for the Synchronized Predeployment and
Operational Tracker(SPOT)
9
PREDEPLOYMENT
The Theater/Joint Task Force (JTF) must identify any Theater Business Clearance
requirements, OPERATION Names and authoritative base/site listings to the SPOT PMO
and to the contracting community as soon as possible to ensure data integrity is as
accurate as possible, as well as provide updates to that information throughout the
contingency.
Furthermore, the Theater/JTF Commander must issue guidance on which authorized
government services (AGS), including Organizational Clothing and Individual Equipment
(OCIE), if any, will be issued or provided to contractors. If not already fielded, the
Theater/JTF Commander will direct placement and use of the SPOT provided JAMMS
terminals to appropriate choke points (such as DFACS, APODs, Billeting, MWR, etc.) for
contractors to scan their Letters of Authorizations (LOAs).
1. Contracting Officer (KO) enters newly awarded contracts and task order(s), and assigns the
AGS to each contract, or validates and updates, if necessary, the information on
contracts/task orders already entered in SPOT.
2. Company Administrator (CA) enters new employee data or validates and
updates, if necessary, previously entered employee data.
3. For all locations, CA enters company owned equipment or any weapons, armored
vehicles, helicopters, or other military vehicles operated by private security contractors.
For USCENTCOM only, CA also enters every company-owned piece of inbound cargo
and equipment.
4. CA creates deployment templates and Letter(s) of Authorization (LOA), if required,
for company employee(s).
5. CA certifies in SPOT that the employee has or will meet all COCOM eligibility
requirements, will complete all COCOM training and processing requirements, to include
theater specific familiarization, and submits the request for an LOA to the cognizant
Government Authority (GA), affiliated with the correct Supporting Organization in
SPOT.
6. GA reviews theater requirements, and ensures eligible government services
are coordinated with in-theater points of contacts.
7. GA validates deployment details in SPOT and if correct, authorizes the LOA. If
deployment details are incorrect, the GA will deny the request for LOA and provide the
reasons for denial back to the CA.
8. KO validates that the government services have been coordinated in theater and meet the
terms and conditions of the contract. KO makes any changes necessary to the authorized
DoD Business Rules for the Synchronized Predeployment and
Operational Tracker(SPOT)
10
government services, and approves or denies the requested LOA, as applicable. If approved,
the KO digitally signs the LOA.
9. CA inputs the employee deployment travel itinerary in SPOT and completes the Eligibility
Requirements tab in SPOT.
DEPLOYMENT
10. CA ensures contractor personnel arrive, in-process through combatant command reception
centers (including JAMMS scan, if available), and updates SPOT with In-theater Arrival
Date and Duty Station Arrival Date, confirming the duty site location.
11. GA and CA monitor contractor movements in theater from deployment to redeployment,
and update the primary duty station, if necessary. CA reports no-shows or changes to the
deployment schedule to the GA and updates the deployment details, to include updating the
person status when changes occur (e.g., R&R, missing, captured).
12. CA and GA inform or ensure that the employing company informs all deploying
contractors that they must carry their LOA with them at all times and scan them at all
JAMMS workstations. Common Access Cards (CAC) are not to be scanned by contractors
when processing through JAMMS.
REDEPLOYMENT
(Redeployment is the transfer of forces and materiel to support another joint
force commander’s operational requirements, or to return personnel,
equipment, and materiel to the home and/or demobilization stations for
reintegration and/or out-processing per Joint Publication 1-02. Redeployment
does NOT include contractors going on rest and relaxation (R&R)/leave, or
temporary duty (TDY) with the intent of continuing the deployment after the
R&R/leave or TDY is complete).
13. CA inputs individual employee redeployment travel itinerary into SPOT.
14. CA certifies in SPOT redeploying employee(s) have completed all theater out-processing
requirements, to include return of any OCIE.
15. CA closes each employee deployment in SPOT and indicates whether mission was
successfully completed or not. CA updates SPOT to include whether the
contractor was injured or killed during the deployment if applicable.
16. GA and KO identify and update SPOT with changes to the contract information.
DoD Business Rules for the Synchronized Predeployment and
Operational Tracker(SPOT)
11
SPOT BUSINESS RULES
The business rules below are listed by role (KO, CA and GA) responsibilities in SPOT,
to include the maximum expected timeline for accomplishing each activity. These
activities shall be accomplished within the prescribed timeframes to coincide with all
personnel deployments. When contractors deploy faster than the timelines noted,
activities shall track with the accelerated movement of the individuals. The activity flow
and timelines are flexible enough to accommodate various circumstances.
Contracting Officer (KO)
A KO is a military or government civilian with the authority to enter into, administer,
and/or terminate contracts and make related determinations and findings on behalf of the
United States Government. The term includes certain authorized representatives of the KO
acting within the limits of their authority as delegated by the KO. The KO makes decisions
on behalf of the federal government and is responsible for ensuring performance of all
necessary actions for effective contracting, ensuring compliance with the terms of the
contract, and safeguarding the interests of the United States in its contractual relationships.
Types of KOs include contingency contracting officers (CCOs), senior contracting officials
(SCOs), principle assistant responsible for contracting (PARC) and administrative
contracting officers (ACOs). This role in SPOT is an inherently governmental function and
is the only SPOT role that can approve an LOA. An individual requesting this role in
SPOT must either be a warranted contracting officer or have a delegated authority from a
warranted contracting officer to have this role.
Contracting Officer Business Rules
SPOT Registration: Prior to registering in SPOT, the KO must take, as a minimum, the
SPOT training for Contracting Officers. The schedule and instructions on how to sign up
for training can be found at http://www.acq.osd.mil/log/PS/ctr_mgt_accountability.html
To register in SPOT, the KO must have a sponsor, who can be any other Government civilian
or Military employee (self-sponsorship is not allowed) in the KO’s chain of command. The
sponsor does not have to be a SPOT user. Once a registration request is made, SPOT will
send an automated email to the sponsor requesting approval. The KO must register with a
Public Key Infrastructure (PKI) certificate or Common Access Card (CAC) and must register
with the contracting office as the KO’s organization. If the contracting office is not in the
SPOT database, contact the SPOT Helpdesk at: DoDhra.beau- alex.dmdc.mbx.spot-
helpdesk@mail.mil or (703) 578-5407.
Add / Maintain Contract Information: (Figure 1, Activity 1 and 15): The KO must enter the
contract data in SPOT NLT 7 days after contract award, or update the contract data
NLT 7 days after a contract modification or contract closeout. If a Task Order (TO) is
required at any time during the contract performance period, under the awarded contract,
DoD Business Rules for the Synchronized Predeployment and
Operational Tracker(SPOT)
12
the KO must enter the TO data in SPOT NLT 7 days after award of the task order. SPOT
does apply to Foreign Military Sales (FMS) contracts, grants and agreements.
Note: Only valid task orders can be entered in SPOT against Blanket Purchase Agreements
(BPA) or Indefinite Delivery, Indefinite Quantity (IDIQ) or other requirement-type
contracts. Do not add contract modifications to SPOT as a task order. If changes are
made to the contract data in SPOT, the KO must update the contract details on the basic
contract. Task order format and details should be consistent with the data entered in the
Electronic Document Access (EDA) and Federal Procurement Data System-Next Generation
(FPDS-NG).
The KO must enter the following contract detail into SPOT as follows:
Contracting Agency: This is the agency that provides the ultimate warranting authority
to the contracting office. In most cases, it will be the Service such as Dept. of the Army,
Dept. of the Air Force or Dept. of the Navy. Only if the KO works for a contracting office
that reports directly under the DoD, should Dept. of Defense be selected as the contracting
agency. For a grant or agreement, the KO must select “DOD Grants and Agreements” as
the contracting agency.
Contract Number: This is the basic contract number listed on the contract and it must
follow the appropriate format for the issuing agency.
Contract Category: The KO must put in the North American Industry Classification
(NAIC) code(s) that is on the contract. If the contractor will be performing any private
security requirements, the KO must also enter the NAIC code of either 561621, 561612,
or 922120 regardless of whether it is the primary NAIC code for the contract or not.
Period of Performance: The KO must only put the funded period of performance, or
the period of performance of the base year, NOT including option years. If options are
exercised, the KO must then update the period of performance end date to reflect that
option period. The KO may not approve an LOA that extends beyond the funded period of
performance for any contractor deployed.
Places of Performance: These are the countries stipulated in the contract. If it
is a worldwide contract, then the KO can select from the entire list, as applicable.
Awarded Competitively: The KO must put yes or no based on what was input
into FPDS-NG.
Contracting Office: This is the office under which the KO is registered in SPOT.
Contracting Officer Representative: The KO should add the COR information and
update it when the COR changes. If there is no appointed COR on the contract, the KO
may enter the POC data of the government representative from the requiring activity or
leave this field blank.
Contractor Company: The KO must select the same version and spelling of the
company name that is on the contract. Only one Prime Company can be associated with
each contract/task order. Subcontractors are to be identified so that their CAs are able to
DoD Business Rules for the Synchronized Predeployment and
Operational Tracker(SPOT)
13
provide the information to build SPOT records and enter associated deployment information
for their own employees.
Note: The Contractor Count Function in SPOT is used by DoS and USAID. The only
DoD exception is Local National employees performing in the USAFRICOM AOR per
current USAFRICOM policy. For the USAFRICOM AOR only, it is the Contracting
Officers’ responsibility to provide the aggregate count in SPOT. All other DoD COCOMs
are not permitted to input any contractor counts into SPOT by aggregate number.
Enter the Authorized Government Services (AGS) on the contract (Figure 1, Activity
1 or 8): The KO can either enter the AGS data upfront on the contract in SPOT, or when
approving the LOA. AGS entered upfront will be the default set of AGS for the contract
and all associated task orders. KOs can amend the AGS for each individual at the time
of approving their LOA. Coordination between the requiring activity, applicable
Garrison, and the KO is necessary to validate availability of AGS prior to contract
award. Available AGS will be specific to the contingency, location, and requirement,
and included in the contract. Selecting an AGS does not imply that it is provided as a
non-reimbursable service to the contractor. The contractor may have to reimburse the
government for the service based on DOD, COCOM and/or Service policy. If the
contractor will be performing in multiple countries, the AGS assigned will be assumed to
be applicable to all countries listed on the LOA, unless the KO cites any exceptions in
the remarks column of the LOA. An example might be that Government Furnished
Meals (GFM) and Dining Facility (DFAC) is checked on the LOA that had both
Afghanistan and Qatar listed as countries to be visited. Both GFM and DFAC would be
authorized in Afghanistan, but if it was not applicable to Qatar, then the KO would have
to state in the Remarks Block, “Government Furnished Meals (GFM) and DFAC are not
authorized in Qatar.”
If the contractor is contractually authorized to carry a weapon, the KO can check
“Authorized Weapon” on the LOA; however, the contractor must comply with all
Combatant Command requirements before the contractor is authorized to carry a weapon
in theater. KOs must determine if the contractor is CAAF or Non-CAAF and select it on
the LOA.
The KO must update any changes to AGS permissions in SPOT NLT 7 days after
being notified of the change. This will require LOAs to be revoked and reissued. The
AGS authorized on the LOA is only applicable while the contractor is in the
performance of their contract and will not be authorized outside the parameters of the
LOA and contract, for example, use of the dining facility is not authorized while a
contractor is on R&R or leave. Appendix 2 defines each AGS contained on the LOA and
Appendix 3 provides a sample LOA.
Approve and Sign the LOA (Figure 1, Activity 8): The KO role is the only role that
can review, approve, and digitally sign the LOA. Before approving the LOA, the KO
must validate that the deployment start and end dates are the same funded period of
performance as cited on the contract, that the countries to be visited only include those
DoD Business Rules for the Synchronized Predeployment and
Operational Tracker(SPOT)
14
locations where performance is required per the contract and that the contractor’s
company has entered the Defense Base Act (DBA) information for contractors going
overseas. The KO must review this data and approve or deny the LOA NLT 3 days
after the LOA request is submitted from the GA for approval.
Revoke the LOA: The KO must revoke the LOA within 24 hours of being notified
by the CA that a contractor is a “no show”, or if there is any significant change to the
deployment information, such as deployment end date (contractor returning early),
changes to the AGS, or changes to the contract number or contract company.
Company Administrator (CA)
Company Administrator (CA) is an individual who works for the company that is
under DoD contract to provide personnel and/or equipment. A CA is required to
update and maintain personal information on all deployed personnel throughout their
deployment or TDY. This includes the duty status, permanent duty location and
closing out all deployments or TDYs.
Prime contractors are responsible for ensuring that their subcontractors at all
tiers also comply with the activities below:
Company Administrator Business Rules
SPOT Registration: Prior to registering in SPOT, the CA must take as a minimum
the SPOT training for Company Administrators. The schedule and instructions on
how to sign up for training can be found at
http://www.acq.osd.mil/log/PS/ctr_mgt_accountability.html . To register in SPOT,
the CA must have a sponsor, who can be any other person (self-sponsorship is not
allowed) within the company or a government representative. The sponsor does not
have to be a SPOT user. Once a registration request is made, SPOT will send an
automated email to the sponsor requesting approval. The CA cannot register with
more than one company. The CA must register with a PKI certificate or CAC unless
they fall under the exception to this policy that allows a CA to register with a User
Name and Password (see the SPOT FAQs). If a CA does register with a User Name
and Password, they must have a government sponsor. The CA must register with
the same spelling and version of their company name that is on the contract which
their personnel will be supporting. If the company name is not in SPOT, the
responsible contracting officer will have to add it to SPOT under the respective
contract number, ensuring that the company name is consistent with the name input
into any contract writing systems.
Enter Employee Data (Figure 1, Activity 2): The CA must add new or update existing
personnel information on previously entered employee data into SPOT NLT 15 days
prior to the estimated deployment start date. NOTE: SPOT applies to Foreign Military
Sales (FMS) contractors, if they also meet the DFARS requirements or COCOM guidance
DoD Business Rules for the Synchronized Predeployment and
Operational Tracker(SPOT)
15
for use of SPOT. In most cases FMS contractors will not need an LOA and should not be
receiving U.S. AGS, but they still need to be deployed in SPOT without an LOA.
Subcontractors may have access to SPOT as Company Administrators to enter their own
personnel’s data. However, the responsibility of accuracy and data management remains
with the Prime Contractor. The CA must enter the following employee details as follows:
o When the letters in the name of an individual do not exist in the English
alphabet, then either use what the translated letter to English would be, or use the
closest English letter.
o A contractor must be designated a Foreign National if they are not a citizen of the
U.S. (Green Card Holders, even with Social Security numbers, are only residents of
the U.S. and are not considered citizens. Therefore, they are considered Foreign
Nationals (FN) in SPOT.) If the Foreign National only has one name, enter the one
name in both the first name and last name fields in SPOT on the condition each
Foreign National has a unique Foreign Identification Number (FIN) and/or
birthdate.
If the contractor does not have a Defense Manpower Data Center (DMDC) Defense
Enrollment Eligibility Reporting Systems (DEERS) issued FIN, the CA must follow
the below steps or the steps in the SPOT User Guide on how to create a FIN. Do not
use the Social Security Number as the Foreign Identification Number.
Steps to establishing a FIN:
o If the FN will be getting a CAC, the FIN will be assigned by the Defense
Manpower Data Center (DMDC). A foreign national can obtain a DMDC FIN
by visiting a DMDC Real-Time Automated Personnel Identification System
(RAPIDS) location. The nearest RAPIDS location may be found at:
http://www.dmdc.osd.mil/rsl/. At least two (2) original proof of identity
documents that include document/identity numbers, issue/expiration dates and
country/state/province/county/city of issuance are required. In addition, the FN
will need to provide the sponsoring Service Branch/Agency, home/mailing
address, work address, email addresses, phone numbers, gender, marital status,
date of birth, organ donor status and blood type. The FN’s photo and
fingerprint will be captured during the DMDC FIN issuance process.
o If a DMDC FIN is not available, generate the FIN using the FN’s
National Issued ID Card number preceded by the 3 digit GENC country
code (e.g., AFG1234).
o If a National Issued ID Card is not available, use the FN’s Passport
Number preceded by the 3 digit ISO country code.
o If the FN has none of the above, the CA will create a FIN by entering up to
18 characters using the following format guidance. The CA will record the
FIN in their company records for future deployment management and
informational purposes:
• Enter the first five letters of the last name. If the last name is not known, use the
DoD Business Rules for the Synchronized Predeployment and
Operational Tracker(SPOT)
16
first name. If the last name is less than 5 letters, enter the entire last name.
• Enter the 8 character date of birth (mmddyyyy). If the date of birth is unknown,
use today’s date.
• If after the CA enters the FIN, SPOT indicates that the FIN is already in use,
contact the SPOT Helpdesk to determine if the contractor has already been added
to SPOT to ensure the contractor is not added to SPOT multiple times. If the FIN
is already associated with a different person, append the above FIN with up to 5
random alphanumeric characters until a unique FIN is established.
Updating FIN for TCN and LN contractors supporting DoD in Afghanistan:
o For TCN and LN contractors supporting the DoD in Afghanistan with no
DMDC FIN, the FIN will be the same as the first eight characters of the
Global Unique Identifier (GUID) from the Biometrics Automated Toolset
(BAT). If the contractor has a previously entered FIN in SPOT, then
update the FIN field with the first 8 characters of the GUID from BAT
once the GUID is assigned to the person. If a person is newly entered
into SPOT without a GUID from BAT and no DMDC FIN or National
Issued IS Number, then initially enter a FIN per instructions under “Steps
to Establish a FIN”. Once a GUID is issued by BAT, then update the
FIN field with the first 8 characters of the GUID. Note: SPOT-ES does
not receive any data from BAT and use of the GUID does not imply the
contractor has been vetted.
Enter Company Equipment (Figure 1, Activity 3): IAW CENTCOM
Clause 5152.247-5900, the CA must enter and validate Contractor Owned
/ Contractor Operated (COCO) equipment that will be used in theater
valued at greater than $50,000 NLT 7 days after the contract is
registered in SPOT. For all locations, the CA must also register
weapons, armored vehicles, helicopters, and other military vehicles
operated by deployed private security contractors in SPOT. Company
equipment will be added and deleted, as necessary, throughout the
contract period of performance.
Request Deployments/LOAs (Figure 1, Activity 4): The CA must request
deployments/LOAs for company employees NLT 10 days prior to the estimated
deployment start date. Although Local Nationals (LN) do not “deploy” (since
they are residents of the host nation) and rarely receive AGS or require a LOA,
they still must be deployed in SPOT (without a LOA). The CA must enter the
following deployment details as follows:
o Deployment Dates: The CA must only enter the dates that the company
employee will be in theater for that specific mission, or for LNs, the
period of performance of the contract. If the employee will travel in and
out of country several times throughout the year, the CA must input the
dates for each deployment separately. However, the deployment dates
DoD Business Rules for the Synchronized Predeployment and
Operational Tracker(SPOT)
17
can include the time that the company employee will spend on
R&R/leave or TDY with the intent of continuing the deployment after the
R&R or TDY is complete. If the deployment start date changes after the
estimated start date, the CA needs to either modify the estimated start
date or cancel the deployment NLT than 15 days after the change in
deployment start date.
o Countries to be visited: The CA should enter all countries that the
company employee will perform in, as designated in the contract.
o Passport Information: The passport field is a mandatory field. However,
many Local Nationals will not have a passport. In this instance, enter the
following in SPOT:
• Passport Number: “Not Required”
• Expiration Date: Insert any future date that is greater than the deployment
end date.
• Issuing Country: Select the country that the contractor is a citizen of.
Selecting the Primary Supporting Organization: This is the requiring activity
or the organization that the COR/GA belongs to. It should not be the same as the
contracting office.
DBA Insurance: Congress enacted the DBA of 1941 to provide workers
compensation protection to employees of government contractors working under
U.S. contracts overseas. Under the DBA, contractors working overseas,
including all levels of subcontractors, are required to obtain DBA insurance for
all employees, including foreign nationals. The LOA should reflect the policy
number that the contractor has been issued. If the prime is requesting a
deployment/LOA for the subcontractor and the subcontractor has their own
policy, then that policy number should be entered. The prime contractor is
responsible for ensuring the subcontractors have the proper insurance.
In-Theater Point of Contact: This should be the government representative
at the deployed site who will be either overseeing the contract or coordinating
logistical support for the contractor employee. If this government
representative has not yet been identified, then the CA must input information
for a company POC (e.g., the country manager or contractor site lead),
physically located in same country as deployed contractor employee. The In-
Theater Point of Contact should be added/updated as soon as the government
person is identified. For deployments to Afghanistan, this is a mandatory field
for all; the point of contact must be located in-country and must be updated if
the POC changes during the contractor’s deployment.
Selecting a Job Title: The job titles in SPOT are consistent with the Department
of Labor O*NET Online authoritative source (www.onetonline.org). It is critical
the job title best fits what the company employee will be doing on the contract.
If the company employee will be performing as a private security contractor, the
DoD Business Rules for the Synchronized Predeployment and
Operational Tracker(SPOT)
18
CA must select either: 1) First-line Supervisors of Police and Detectives; 2) Police
Patrol Officer, or 3) Security Guard for the job title.
When submitting an LOA to the government for authorization, the CA must check
a certification statement that the individual has or will meet all DODI 3020.41 and
COCOM qualifications and requirements including training, medical, and dental
screenings and assessments prior to this deployment (Figure 1, Activity 5).
Complete Eligibility Requirements and Establish Deployment Itinerary
(Figure 1, Activity 9): The CA must complete the Eligibility Requirements tab in
SPOT, and enter the employee deployment full travel itinerary details (e.g., flight
number, time of arrival) NLT 10 days prior to the scheduled departure date.
This will facilitate proper planning by the Deployment Reception Site (DRS).
CA will ensure all employees process through the DRS, if available, with required
documentation (e.g., LOA and/or CAC), and report to the government in-theater POC
upon arrival.
CA will ensure that all CAAF-designated employees and others who are
authorized government services via an LOA know that they are required to carry their
LOAs with them at all times and use it to scans at any JAMMS workstation.
If contractor is issued a weapon(s) after they have been deployed, the CA must go
back into the Eligibility Requirements Tab and list the weapons type(s) and serial
numbers under Tab 4, “Personal Equipment” for each weapon issued specifically to
that individual NLT 3 days after receipt of weapon information.
Update Deployment Details (Figure 1, Activity 10 and 11): The CA must enter the
in- theater arrival date (ITAD) and the duty station arrival date in SPOT NLT 1 day
after the company employee has entered the theater or arrived at the Primary
Duty Station. For Local Nationals (LNs), the CA must use the date the LN started work
in both the “In-theater Arrival Date” and the “Duty Station Check-In Date” blocks. If a
contractor’s deployed duty station is a ship, then the in-theater arrival/duty station
check- in dates equal the date the ship disembarks the U.S. The CA will report the
contractor employee as a “no show” to the KO if the company employee has not arrived
at their primary duty site within 3 days of their estimated arrival date. The CA will
track company employees throughout the deployment process and must update changes
to the Primary Duty Station in SPOT NLT 1 day after the company employee
arrives at a new Primary Duty Station. A Primary Duty Station is where the company
employee will reside a majority of the time. Therefore, if the company employee is
traveling to another duty station on a temporary basis and intends on returning to the
Primary Duty station, then no update in SPOT is required. This also applies to company
employees going on R&R/leave or TDY status. The CA must also update the Person
Status in SPOT (e.g., R&R, missing, or injured, but intends to return to duty/work)
for an employee NLT than 1 day after the change in employee status.
DoD Business Rules for the Synchronized Predeployment and
Operational Tracker(SPOT)
19
For all Afghanistan Deployments, CA must update and/or affirm every 30 days
that the Actual In Theater Arrival Date (ITAD), Duty Station Check-in Date, Duty
Station Country, Duty Station City, Duty Station Site, In-theater POC information,
24/7 Company POC information, and Person Status are correct by entering a
checkmark by the reaffirmation statement and selecting the submit button on the
Person Deployment page.
Note: IAW DFARS Class Deviation 2013-00017 “Contractor Demobilization”,
the CA may request an extension of the deployment/LOA for a period of up to 30
calendars days after the expiration of the current contract performance period for
those contractor personnel whose presence is required in Afghanistan to execute an
approved demobilization plan. The CA shall submit that request to the KO
NLT 30 days prior to the expiration of the current period of performance. In
this case, the KO will have to revoke the LOA and the CA will have to resubmit a
new request to the Government with deployment end date in 30 days.
Complete Visa detail information: In countries that require a work visa, it is
mandatory for the CA to enter the Visa number and Expiration Date of the work
visa where the company employee will perform work. Visa remarks can be
entered in the Visa Remarks block. It is possible to enter multiple work visas in
SPOT for each company employee. It is not necessary to enter transit visas for
countries through which the company employee passes on his/her way to the
primary duty station. It is not necessary to enter tourist visas for countries that
the employee visits while on R&R.
Plan Redeployment (Figure 1, Activity 12): The CA must enter the
redeployment travel itinerary NLT 10 days prior to the estimated deployment
end date or return date, if company employee is redeploying prior to the
deployment end date in SPOT. This estimated date shall be used to
coordinate departure and redeployment planning activities in theater and back
at the home station.
CA will certify redeploying personnel have completed all unit/requiring
activity and theater out-processing requirements prior to departure (Figure 1,
Activity 13), (e.g., return of OCIE if required).
Closeout Deployment (Figure 1, Activity 14): The CA must close out the
deployment in SPOT NLT 3 days after the company employee redeploys. The
CA must also closeout the deployment in SPOT if the company employee is
killed; injured to the point that he/she is unable to return to duty; or
missing/captured for more than 30 days (See Appendix 2 for further
explanations of these terms). The CA will update contractor status in SPOT upon
departure from the country/theater to include identifying whether the terms of the
deployment have been fulfilled, the reason for leaving the mission, person status,
mode and date of departure from the AOR, and validate when OCIE was returned.
The CA must ensure that all employee LOAs are returned to the company or
DoD Business Rules for the Synchronized Predeployment and
Operational Tracker(SPOT)
20
their GA, or have been destroyed NLT 3 days after the redeployment and that
the deployment has been closed to prevent fraudulent use of the LOA and to
protect personal information that is on the LOA. The CA must also release the
employee in SPOT NLT than 3 days after the employee’s employment with
that company is terminated to accommodate entry of that contractor in SPOT by
another contract company.
Note: Redeployment does not include contractors going on R&R/leave or TDY with the
intent of continuing the deployment after the R&R or TDY is complete. If an option
year is being exercised, the CA will have to close out the current deployment and then
create a new deployment, with new LOA request, if applicable, for the deployment in
the new option year.
Government Authority (GA)
Government Authorities (GAs) can be either military or government civilian personnel,
and includes multiple subcategories, such as requiring activities (RA), Contracting
Officer Representatives (CORs), theater and JTF commanders and staffs, deployment
reception sites (DRS), base operating support (BOS) personnel, quality assurance
representatives, and property administrators. GAs both provide and use the
information maintained in or accessed through SPOT.
Note: There is also a Government Administrator role in SPOT, which allows the same
functionality as the Government Authority role, except with respect to LOAs. The
Government Administrator is able to request LOAs while the Government Authority is
able to request, review, deny, recall and authorize LOAs.
Government Authority Business Rules
SPOT Registration. Prior to registering in SPOT, the GA must take as a minimum the
SPOT training for Government Administrators/Authorities. The schedule and
instructions on how to sign up for training can be found at
http://www.acq.osd.mil/log/PS/ctr_mgt_accountability.html . To register in SPOT,
the Government Authority’s sponsor must be a Government civilian or military
employee (self-sponsorship is not allowed) within the GA’s organization. The
sponsor does not have to be a SPOT user. Once a registration request is made, SPOT
will send an automated email to the sponsor requesting approval. The GA must
register with a PKI certificate or CAC, and must register with their organization. If
that organization is not in SPOT, contact the SPOT Helpdesk at: dodhra.beau-
alex.dmdc.mbx.spot-helpdesk@mail.mil or 703-578-5407. A Government Authority
may register with more than one organization, if necessary; however, in that case they
must obtain approval from a military or Government civilian employee from each
requested organization. Contractors who are requesting a Government role in SPOT
are required to submit DD-2875, System Authorization Access Request (SAAR) that
is digitally signed by both the user and the Sponsor. In addition, the contractor must
have a government email address.
DoD Business Rules for the Synchronized Predeployment and
Operational Tracker(SPOT)
21
Note: The SPOT system is designed to allow the GA to perform the CA Activities from
Figure 1 in cases where the CA would be an employee of a foreign company or a small
business that would have trouble accessing the system. If this is the case, refer to the CA
Business Rules for these activities.
Coordinate mission/country requirements (Figure 1, Activity 6 & 7): The GA must
review mission and contractor theater requirements at website
http://www.acq.osd.mil/dpap/pacc/cc/areas_of_responsibility.html prior to validating the
CA deployment data in SPOT. The GA is responsible for coordinating with the CA and
KO to ensure type and levels of AGS authorized in the contract are available at the
designated location to accommodate number of personnel during the period of the
deployment. The GA will inform the CA that deployed contractor personnel must scan
with their LOA at JAMMS locations as opposed to using their CAC to ensure that the
government service being accesses is authorized. The GA must validate the
deployment data entered in SPOT by the CA to ensure it meets contractual and
mission requirements. The GA must authorize or deny the LOA NLT 3 days after
the LOA request is submitted to the GA for authorization.
Monitor and Update Deployment Details (Figure 1, Activity 11): The GA (in
concert with the CA) must monitor contractor movement and status in theater from
deployment to redeployment. If the contractor changes their Primary Duty Station, the
GA must either update that information in SPOT or ensure that the CA makes the
update in SPOT NLT 1 day of the company employee arriving at a new Primary
Duty Station. A Primary Duty Station is where the company employee will reside a
majority of the time. Therefore, if the company employee is just traveling to another
duty station on a temporary basis and intends on returning to the currently listed
Primary Duty station, then no update in SPOT is required. This also applies to
company employees going on R&R/leave or TDY status. The GA must notify the KO
of any changes to AGS permissions NLT 3 days after the change, so that the KO can
revoke the LOA and direct the CA to update and submit a new LOA request.
Contractors who are terminated from their company, or have any other reason for
leaving the country/theater prior to the estimated departure date in SPOT, must have
their deployments closed out either by the GA or CA and their LOAs revoked by the
KO NLT 3 days after the redeployment. If a company employee goes on R&R/leave
or TDY, the deployment may remain open.
Theater/Joint Task Force (JTF) SPOT Responsibilities
Although the Theater/JTF Commander may not be SPOT registered users, they have a
significant influence on the data that is input into SPOT, and consequently have
responsibilities to ensure the following types of information are communicated to the
SPOT PMO and to the Contracting Community by posting on the website at
http://www.acq.osd.mil/dpap/pacc/cc/areas_of_responsibility.html :
OPERATION NAME(S): Any official names, such as OPERATION ENDURING
DoD Business Rules for the Synchronized Predeployment and
Operational Tracker(SPOT)
22
FREEDOM (OEF), that are given to contingencies, with the official start and end
dates as applicable. This information is a mandatory input field when creating a
deployment and requesting an LOA in SPOT.
THEATER BUSINESS CLEARANCE REQUIREMENTS (TBC): If a TBC is
required, a TBC policy and/or all unique clauses for the contingency must be
established. For example, OEF CENTCOM established a TBC requirement for
specific countries that all contracts receive CENTCOM TBC approval prior to
award, and issued a specific number that is input into SPOT.
Authoritative Base/Site Listings: All proper location names, spellings and
associated geo-spatial location data in the AOR.
Authorized Government Services/OCIE: Policy or guidance from the Service
Components on which services in the AOR (e.g., billeting, medical, MILAIR) will
be available to contractors, and whether that service will be provided at no cost or if
it will be a reimbursable expense for the contractor. Additionally, policy or guidance
on which OCIE, if any, will be issued to contractors is to be posted. This
information is required for the contracting officer to properly populate the
permissions on the LOA.
Joint Asset Movement Management System (JAMMS): Identify appropriate contractor
choke points (e.g., DFACs, APODs, billeting) and submit requests for fielding of
JAMMS terminals and JAMMS operator training to the SPOT PMO, including
identification of designated operators for JAMMS along with their contact information.
DoD Business Rules for the Synchronized Predeployment and
Operational Tracker(SPOT)
23
Appendix 1: Abbreviations
ACO Administrative Contracting Officers
AGS Authorized Government Services
AOR Area of Responsibility
AWOL Absent Without Leave
BOS Base Operating Support
BX Base Exchange
CA Company Administrator
CAAF Contractors Authorized to Accompany the Force
CAC Common Access Card
CBRN Chemical, Biological, Radiological and Nuclear
CC Contractor Company
CCDR Combatant Commander
CCO Contingency Contracting Officers
CENTCOM United States Central Command
COCO Contractor Owned Contractor Operated
COCOM Combatant Command
CONUS Continental United States
CORs Contracting Officer Representatives
DBA Database Administrator
DBA Defense Base Act
DEERS Defense Enrollment Eligibility Reporting System
DFAC Dining Facilities Administration Center
DFARS Defense Acquisition Regulations System
DMDC Defense Manpower Data Center
DoD Department of Defense
DoDI DoD Instruction
DOS Department of State
DPO Diplomatic Post Office
DRS Deployment Reception Site
DSN Defense Switched Network
DTM Directive-Type Memorandum
FAQ Frequently Asked Questions
FAR Federal Acquisition Regulation
FIN Foreign Identification Number
FMS Foreign Military Sales
FN Foreign National
FPDS-NG Federal Procurement Data System - Next Generation
GA Government Authority / Government Administrator
GFM Government Furnished Meals
IAW In Accordance With
ITAD In-Theater Arrival Date
DoD Business Rules for the Synchronized Predeployment and
Operational Tracker(SPOT)
26
JAMMS Joint Asset Movement Management System
JPERSTAT Joint Personnel Status Report
JTF Joint Task Force
KO Contracting Officer
LN Local National
LOA Letter of Authorization
MIA Missing in Action
MOU Memorandum Of Understanding
MRE Meal, Ready to Eat
MTF Military Treatment Facility
MWR Morale Welfare Recreation
NACI National Agency Check with Inquiries
NAIC North American Industry Classification
NEX Navy Exchange
NOK Next of Kin
OCIE Organizational Clothing & Individual Equipment
OCONUS Outside the Continental United States
OEF Operation Enduring Freedom
OGAs Other Government Agencies
OPM Office of Personnel Management
PARC Principle Assistant Responsible for Contracting
PKI Public Key Infrastructure
PMO Program Management Office
POC Point of Contact
PoP Period of Performance
POW Prisoner of War
PX Post Exchange
R&R Rest and Relaxation
SOFA Status of Forces Agreement
SPOT Synchronized Predeployment and Operational Tracker
SPOT-ES Synchronized Predeployment and Operational Tracker - Enterprise Suite
SSN Social Security Number
TBC Theater Business Clearance
TCN Third Country National
TDY Temporary Duty
TO Task Order
TOPSS Total Operational Picture Support System
USAID United States Agency for International Development
DoD Business Rules for the Synchronized Predeployment and
Operational Tracker(SPOT)
2 27
Appendix 2: Definitions
Active (In the SPOT Person Status): The contractor is in a status (i.e. not AWOL,
deceased, injured, missing, or captured) to continue performance on the current or
subsequent contract, if necessary.
Army Post Office/Fleet Post Office/ Military Post Office (APO/FPO/MPO): Military
mail service for Military and Civilian Members of the U.S. Armed Forces. IAW DODI
3020.41, in operations where no reliable or local mail service is available, CAAF who are
U.S. citizens will be authorized postal support IAW DoD 4525.6-M. CAAF who are not
U.S. citizens will be afforded occasional mail service necessary to mail their pay checks
back to their homes of record. Contractors supporting FMS cases are not normally
authorized APO/FPO/MPO privileges.
Authorized Weapon: Indicates contractual approval for specified contractor personnel
to possess or carry firearms, ammunition, or non-lethal weapons. Final approval resides
with the CCDR.
AWOL: Absent Without Leave.
Billeting: Provides the ability to utilize government lodging facilities or government
quarters. The billeting standards for CAAF will be commensurate with standards being
applied to deployed DoD civilian employees at the same location. CAAF standard grade
equivalents are GS-14 for supervisors and GS-11 for non-supervisors. Billeting may or
may not be charged to the contractor.
CAC (Common Access Card): IAW DTM 08-003 Change 3, issuance to contractors is
based on the DoD government sponsor’s determination of the type and frequency of
access required to DoD facilities or networks that will effectively support the mission. To
be eligible for a CAC the access requirement must meet one of the following criteria:
(a) The individual requires access to multiple DoD facilities or access to multiple non-
DoD Federal facilities on behalf of the Department on a recurring basis for six
months or more.
(b) The individual requires both access to a DoD facility and access to DoD networks
DoD Business Rules for the Synchronized Predeployment and
Operational Tracker(SPOT)
2 28
on site or remotely.
(c) The individual requires remote access to DoD networks that use only the CAC
logon for user authentication.
Refer to para 3.a.(3) of the DTM for additional eligibility criteria for non-U.S. persons. As
a minimum, a favorable adjudication of a National Agency Check with Inquiries (NACI)
and an FBI fingerprint check is required in order to obtain a CAC.
Contractors Authorized to Accompany the Force (CAAF): Contractor personnel,
including all tiers of subcontractor personnel, who are authorized to accompany the force
in applicable contingency operations and have been afforded CAAF status through the
LOA. CAAF generally includes all U.S. citizen and TCN employees not normally
residing within the operational area whose area of performance is in the direct vicinity of
U.S. forces and who routinely are co-located with U.S. forces (especially in non-
permissive environments). Personnel co-located with U.S. forces shall be afforded CAAF
status through an LOA. In some cases, CCDR subordinate commanders may
designate mission essential LN contractor employees (e.g., interpreters) as CAAF. CAAF
status does not apply to contractor personnel in support of contingencies within the
boundaries and territories of the United States.
Commissary: Firms under contract to the DoD, and their employees (and dependents of
their household) stationed outside of the United States, and outside the U.S. Territories and
Possessions may be authorized commissary store support on a reimbursable basis, provided
that such agencies and individuals are serving the U.S. Armed Services exclusively; it has
been determined that the granting of the privilege would be in the best interest of the
United States; and when failure to grant such privilege would impair the efficient operation
of the Department of Defense. This determination is made by the cognizant military
service (DODI 1330.17, Enclosure 2).
Deceased-Killed as the result of Hostile Action: A person who is the victim of a terrorist
activity or who becomes a casualty “in action.” “In action” characterizes the
casualty as having been a direct result of hostile actions, sustained in combat or relating
thereto, or sustained going to or returning from a combat mission provided that the
occurrence was directly related to hostile action. Included are persons killed mistakenly or
DoD Business Rules for the Synchronized Predeployment and
Operational Tracker(SPOT)
2 29
accidently by friendly fire directed at a hostile force or what is thought to be a hostile force
(Ref: DoDI 1300.18).
Deceased-Died as a result of Non-Hostile Action: A person who has died due to
circumstances not directly attributable to hostile action or terrorist activity, but as the
result of illness or injuries due to the elements, accidents, homicide, self-inflicted
wounds, combat fatigue, and except in unusual cases, wounds or death inflicted by a
friendly force while the individual is an AWOL, deserter, or dropped-from-rolls status or
is voluntarily absent without authority from a place of duty (Ref: DoDI 1300.18).
DFACs (Dining Facilities): Contractors that have access to DFACs may or may not be
charged for meals depending on the location, how austere the environment is, and the policy
of the Service operating the DFAC. If the contractor is going to be authorized access to the
DFAC at no cost, then GFM must also be checked on the LOA.
DPO (Diplomatic Post Office): The Department of State approved limited access to
the Diplomatic Post Office mail system for U.S. Government contractors who are U.S.
citizens serving overseas in Iraq. This limited access is defined as mail not to exceed
two pounds per piece incoming or outgoing.
Excess Baggage: Government authorization to carry more baggage than what MILAIR
or the commercial airlines typically authorize. The contractor may be charged additional
fees by commercial airlines based on their cognizant policies.
Government Furnished Meals (GFM): Government provided meals at no cost to
the contractor (e.g., MREs or meals at the DFACs). If the contractor will be provided
GFM from the DFAC, both GFM and DFAC must be checked on the LOA.
Injured: A person whose illness or injury requires medical attention, and may or may
not require hospitalization, but will be unable to complete the TDY/deployment (Ref:
DoDI 1300.18). SPOT has two injured statuses:
Injured – Injured as a result of hostile actions.
Injured – Injured as a result of non-hostile action.
Local Access Badge: A credential issued to contractors to gain access to a
military or government base, camp, or specific facility.
DoD Business Rules for the Synchronized Predeployment and
Operational Tracker(SPOT)
2 39
MILAIR: Authorization to travel inter and intra-theater on military aircraft. Unless a
waiver is in place for contractors, this is a reimbursable expense to the government.
Mil Banking: Approved use of military finance offices to either obtain an Eagle Cash
Card, which functions like an ATM debit card, or to cash checks.
Military Clothing: Contractors shall not be issued military clothing or military look-
alike uniforms, unless authorized for operational reasons by the Combatant Commander
or subordinate Joint Force Commander. This authorization must be in writing and must
be maintained in the possession of the contractor at all times (Ref: DoDI 3020.41). This
does not include military issued equipment.
Mil Exchange: Military exchange services (i.e., Navy Exchange or NEX, Base Exchange
or BX, and Post Exchange or PX) may be authorized for CAAF who are U.S. citizens.
CAAF who are not U.S. citizens and non-CAAF are not authorized exchange services
(Ref: DoDI 3020.41).
Military Issued Equipment: CCDRs, when necessary, may authorize CAAF and
selected Non-CAAF to be issued military individual protective equipment (e.g., CBRN
protective ensemble, body armor, ballistic helmet) (Ref: DoDI 3020.41).
Missing: Definition for person status in SPOT; requirement to closeout deployment if
missing for over 30 days.
MWR: Morale, welfare, and recreation services will be authorized for CAAF who are
U.S. citizens. CAAF who are not U.S. citizens and non-CAAF are not authorized MWR
services (Ref: DoDI 3020.41).
Non-CAAF: Personnel who are not designated as CAAF, such as Local National (LN)
employees and non-LN employees who are permanent residents in the operational area or
TCNs not routinely residing with US forces (and TCN expatriates who are permanent
residents in the operational area) who perform support functions away from the close
proximity of, and do not reside with, U.S. forces. Government-furnished support to non-
CAAF is typically limited to force protection, emergency medical care, and basic human
needs (e.g., bottled water, latrine, facilities, security, and food when necessary) when
performing their jobs in the direct vicinity of U.S. forces (Ref: DoDI 3020.41).
OPEN Person Status: Is a deployment record that does not have an In-Theater Arrival
Date (ITAD) populated.
Primary Care: Primary care includes routine inpatient and outpatient services, non-
emergency evacuation, pharmaceutical support, dental services, and other medical support
as determined by appropriate medical authorities based on recommendations from the joint
force command surgeon and on the existing capabilities of the forward-deployed Military
Treatment Facilities (MTF).
Primary medical or dental care normally will not be authorized or provided to CAAF by
MTF, unless specifically approved by the CCDR or subordinate Joint Force Commander.
DoD Business Rules for the Synchronized Predeployment and
Operational Tracker(SPOT)
2 31
Primary Care is not authorized for non-CAAF employees. All medical care received by
contractors in the AOR is reimbursable to the Government (Ref: DoDI 3020.41).
POW (Prisoner of War): The international legal status of military and certain other
personnel captured during and armed conflict between two countries and that status
entitles those captured to humanitarian treatment under the Third Geneva Convention,
“Geneva Convention Relative to the Treatment of Prisoners of War.” The
international status of POW is automatic when personnel “have fallen into the power
of the enemy.”
Requiring Activity: A military or other designated organization that identifies and
receives contracted support during military operations.
Transportation (other than MILAIR): Authorization for the use of
government-owned or leased vehicles, such as vehicles obtained from a motor
pool.
DoD Business Rules for the Synchronized Predeployment and
Operational Tracker(SPOT)
33 2
Appendix 3: Sample LOA
DoD Business Rules for the Synchronized Predeployment and
Operational Tracker(SPOT)
34 2