Post on 19-Mar-2020
Note: Water table plans/components are not included in kit
D.I.Y. Our Torchmate One CNC Do
It Yourself kit allows those
on a tight budget to benefit
from all the advantages of
CNC plasma cutting.
Essentially, you are
exchanging your labor for a
big savings.
You fabricate the entire
machine from steel you
purchase locally. We provide
plans, software, electronics,
all the brackets, timing
pulleys and belts, gearing,
needle bearing cam followers
and hardware for the project. You buy only the required steel tubing and
cold roll bar.
Unlike the Torchmate Two and Three, which use an industrial linear
motion Y axis roller cassette and rail, you fabricate the Torchmate One’s Y
axis parts. You do this with the plans and laser cut brackets we provide.
The Torchmate One has permitted thousands of customers to realize
the precision and efficiency of CNC production. It is not uncommon for
Torchmate One owners to run their machines 8‐10 hours per day, 365
days per year. This will be the one employee that
shows up every day and never talks back!
Torchmate One kits include driver software and 2
Axis, 8 amp 380 Oz. In. electronics. Additional
accessories can be added as your budget permits.
www torchmate com sales@torchmate com