Post on 20-Jul-2021
Digital Readout SystemMODEL H6087-98, H7848-51
INSTALLATION MANUAL
WARNING: NO PORTION OF THIS MANUAL MAY BE REPRODUCED IN ANY SHAPE OR FORM WITHOUT THE WRITTEN APPROVAL OF GRIZZLY INDUSTRIAL, INC.
This manual provides critical safety instructions on the proper setup, operation, maintenance, and service of this machine/tool. Save this document, refer to it often, and use it to instruct other operators.
Failure to read, understand and follow the instructions in this manual may result in fire or serious personal injury—including amputation, electrocution, or death.
The owner of this machine/tool is solely responsible for its safe use. This responsibility includes but is not limited to proper installation in a safe environment, personnel training and usage authorization, proper inspection and maintenance, manual availability and compre-hension, application of safety devices, cutting/sanding/grinding tool integrity, and the usage of personal protective equipment.
The manufacturer will not be held liable for injury or property damage from negligence, improper training, machine modifications or misuse.
Table of ContentsINSTALLATION ................................................................................................................................ 2
WARRANTY AND RETURNS ........................................................................................................ 13
Manual Accuracy
your machine may not exactly matchthe manual
www.grizzly.com
Contact Info
INSTALLATION
Precaution1.
Figure 1
Figure 1.
2.
3.
Figures 2 & 3
Figure 2.
Figure 3.
Location Selection
To select proper intallation locations:
1.
2.
Figure 4
Figure 4.
3.
Figure 5,
Figure 5. .
4.Figure 6
1/8"
1/8"
Scale Cover
Scale
MountedScale Cover
Figure 6.
5.
6.
Figure 7
R2 > 3"
R1 > 1-3/8"
Figure 7.
7.
8.
Figure 8.
Figure 8.
Installation Requirements
1.Figure 9 & 10
Figure 11:
1" ±
.004
"
.004"
.002"
0" ± .008"
.709 ± .008"
Figure 9.
Figure 10.
Figure 11.
2.
Figure 12
Figure 13
> .04"
> .06"
> .06"
Figure 12.
Figure 13.
3. Figure 14
Scale Body
Reader Head
Figure 14.
Direction on Lathe Installation:
Note:
Scale Reading Direction:
Lathe Scale Installation:
Scale Setup
To set up the "X" axis scale:
1. Figure 15
Figure 15.
2.
3.Figure 16
4.
Figure 17 The blue packing between the reader head and scale allows for the correct clearance and holds the reader head parallel to the scale.
Figure 16.
Figure 17.
To set up the "Y" axis scale:
1.
Figure 18
Figure 18.
2. Figure 19
Figure 19.
Fitting the "Z" axis scale:
1.
Figure 21
Figure 22
3.
Figure 20.
Figure 20.
Figure 21.
Figure 22.
Lathe Installation
To install readout on a lathe:
1. Figure 23
Figure 23.
2.
Figure 24
Figure 24.
3.Figure 25
Figure 25.
4.Figure 26
Figure 27
Figure 26.
Figure 27.
Dimensions
WARRANTY CARD
The following information is given on a voluntary basis. It will be used for marketing purposes to help us develop better products and services. Of course, all information is strictly confidential.
1.
2.
3.
4.
5.
6.
7.
8.
9.Note: We never use names more than 3 times.
10. _____________________________________________________________________
_________________________________________________________________________________
_________________________________________________________________________________
_________________________________________________________________________________
WARRANTY AND RETURNS
Buy Direct and Save with Grizzly® – Trusted, Proven and a Great Value!
~Since 1983~
ORDER24 HOURS A DAY!
1-800-523-4777
Visit Our Website Today For Current Specials!