Post on 19-Aug-2019
DESIGN MASCHINES PORTFOLIO.
design technology
Member of
www.streicher.de
Kolb Design Technology GmbH & Co. KGJosef-Wallner-Straße 5aD-94469 Deggendorf , GermanyPhone +49 (0)991 344739 - 0Fax +49 (0)991 344739 - 290sales@kolb-technology.comwww.kolb-technology.com
Illustrations similar
design technology
Subject to technical changes 05/2017
ConceptLine Easy ConceptLine StudioLine S StudioLine M StudioLine L Mill Box
Application Measuring Milling clay
Milling clay and hardboard densities
< 0,5 g/cm3
Milling clay and hardboarddensities
< 0,7 g/cm3
Milling clay and hardboarddensities
< 0,7 g/cm3
Milling clay and hardboarddensities
< 0,7 g/cm3
Construction / Drive system
Milling machine base / Linear guides / no counterweight / Linear motion drives (X/Y)Ball screw drive (Z) / highest rigidity and accuracy
CMM probe3D-Accessories
Two axis head (ZAK)
HSK 32C
Two axis head (ZAK)
HSK 40C
Two axis head (ZAK)
HSK 50C
Two axis head (ZAK)
HSK 50C
Machine housing, Two axis head (ZAK) HSK 63E
Travel range* X/Y/Z (mm) 6724/1624/2440 6724/1624/2418 6324/1650/2600 6378/1650/2600 6378/1650/3900 2500/1464/1300
Travel range B/C axis - B-axis: ± 210°
C-axis: ± 105°B-axis: ± 210°C-axis: ± 105°
B-axis: ± 210°C-axis: ± 105°
B-axis: ± 210°C-axis: ± 105°
B-axis: ± 210°C-axis: ± 105°
Milling box/measuring box* X/Y/Z (mm)(above mentioned HSK with cutter length of 200 mm)
6724/1624/2440 5984/1254/2265 5500/1238/2188 5500/1211/2161 5500/1211/3510 2000/1200/900
Typical milling speed (m/min) - 8 - 10 12 - 15 12 - 15 8 - 10 12 - 15
Max. travel speed (m/min) 12 12 20 20 16 20
Spindle power (kW) S1 mode - 1.0 2.5 7.5 7.5 7.5
Spindle speed (U/min) - 16,000 18,000 18,000 18,000 18,000
* Basic version at standard workplace (rail length: 8 m); other rail lengths on request.
TECHNICAL DATA