Post on 05-Feb-2018
ROHI International Complete Fastener Solutions
1
Dear Customer
We take the opportunity to introduce our self to your esteemed organization, as the leading
suppliers of the fasteners based in Eastern Province - Jubail, Saudi Arabia.
Our establishment is supported by major In-Kingdom Saudi Arab manufacturers and
International manufacturers. Our trained & qualified sales people can answer your question and
queries with proper know-how & details for the product.
We are registered and approved vendors in Saudi Arabian Oil Company (Saudi Aramco), Royal
Commission and many other prestigious organizations.
Our vendor numbers:
Saudi Aramco 10039524
Royal Commission 12908
Saudi Chevron Philips 120412
In addition to this, we are providing satisfactory services to all major contractors/
sub-contractors, steel builders, off-shore oil & mining industries, chemical & petrochemical
industries, refineries, automotive industries and private sectors.
We are producing various items including anchor bolts, U bolts, pipe support, pipe clamp,
gratings, fabrication works etc. as per client‟s drawing and specifications.
We are attaching herewith, a list of specifications for your reference. This list is not exclusive as
we have mentioned the fast moving standards only.
Kindly forward us your inquiries of fasteners in any standard according to your job requirements.
We sincerely hope that you may find this introduction very useful for all your future fasteners
requirements.
If you require any further information about our company and products, please feel free to
contact us. Hoping to receive your valuable enquiries and looking forward to serve you in near
future.
ROHI International Complete Fastener Solutions
2
Heavy Hex Structural Bolts - ASTM A325M
Metric Series - Dimensions
Note:
1. The Bolts will generally conform to ANSI B18.2.3.7M - Metric Heavy Hex Structural Bolts
2. Treads will conform to Class 6g of ANSI B1.13M
3. Material: High grade carbon/alloy steel
4. Heat Treatment: As per ASTM A325M and ASTM F568 Class 8.8
5. Thread Length LT:
LT1 for L ≤ 100
LT2 for L > 100
All dimensions are in millimeters
Nominal Thread
Size Pitch
W Max.
C Min.
B Max.
H Nom.
R Min.
Length of Thread Length
Range L
LT1 LT2
M16 2.00 27.00 29.56 16.70 10.0 0.6 31 38 50 - 200
M20 2.50 34.00 37.29 20.84 12.5 0.8 36 43 50 - 200
M22 2.50 36.00 39.55 22.84 14.0 0.8 38 45 70 - 200
M24 3.00 41.00 45.20 24.84 15.0 1.0 41 48 70 - 200
M27 3.00 46.00 50.85 27.84 17.0 1.2 44 51 80 - 200
M30 3.50 50.00 55.37 30.84 18.7 1.2 49 56 100 - 200
ROHI International Complete Fastener Solutions
3
Heavy Hex Structural Bolts - ASTM A325M
Metric Series - Physical Properties, Tightening Torques
Physical Properties:
Physical Properties Type 2
Nominal Thread Size M16 to M36
Tensile Strength (min.) (N/mm
2)
830
Proof Load Stress (min.) (N/mm
2)
600
On GL = 2” Elongation % (min.) 12
Reduction of Area % (min.) 35
Hardness HR C23 - C34
Recommended Tightening Torques and Induced Loads:
Thread Size &
Pitch
Stress Area
Torque
Induced Load
N
mm2 Nm
M16 - 2.00 157 233.0 72,800
M20 - 2.50 245 453.6 113,400
M22 - 2.50 303 616.0 140,000
M24 - 3.00 353 782.9 163,100
M27 - 3.00 459 1,145.3 212,100
M30 - 3.50 561 1,554.0 259,000
Note:
The Tightening Torques are calculated to induce stress equal to approximately 70% of Yield Stress.
ROHI International Complete Fastener Solutions
4
Hexagon Head Bolts / Screws DIN 931/933
Metric Series - Dimensions
Note:
1. The bolts and screws will generally conform to ISO 4014, ISO 4017 and DIN 931/933.
2. Threads will conform to Class 6g of ISO 965/2 Coarse Series.
3. Material: High grade carbon/alloy steel.
4. Heat Treatment: Property Class 8.8 or 10.9 *
5. Thread Length LT: LT1 for L ≤ 125 LT2 for L > 125 to 200 LT3 for L > 200
6. Screw length equal to or shorter than those listed in column „LFT‟ will be fully threaded.
7. Sizes in brackets are non-preferred standards.
8. All dimensions are in millimeters.
Nominal Thread
Size Pitch
W Max.
C Min.
B Max. H Nom. R Min. Length of Thread Length
Range LT1 LT2 LT3 LFT
M6 1.0 10.0 11.05 6.0 4.0 0.25 18 - - 25 15 - 100
M8 1.25 13.0 14.38 8.0 5.3 0.4 22 28 - 30 15 - 100
M10 1.5 17.0 16.0 18.90 17.80 10.0 6.4 0.4 26 32 45 35 15 - 100
M12 1.75 19.0 18.0 21.10 20.03 12.0 7.5 0.6 30 36 49 40 20 - 150
(M14) 2.0 22.0 21.0 24.49 23.35 14.0 8.8 0.6 34 40 53 45 25 - 150
M16 2.0 24.0 26.75 16.0 10.0 0.6 38 44 57 50 25 - 200
(M18) 2.5 27.0 30.14 18.0 11.5 0.6 42 48 61 60 35 - 200
M20 2.5 30.0 33.53 20.0 12.5 0.8 46 52 65 60 35 - 200
(M22) 2.5 32.0 34.0 35.72 37.72 22.0 14.0 0.8 50 56 69 65 40 - 200
M24 3.0 36.0 39.98 24.0 15.0 0.8 54 60 73 75 40 - 200
(M27) 3.0 41.0 45.20 27.0 17.0 1.0 60 66 79 85 70 - 200
M30 3.5 46.0 50.85 30.0 18.7 1.0 66 72 85 85 75 - 300
(M33) 3.5 50.0 55.37 33.0 21.0 1.0 72 78 91 95 75 - 300
M36 4.0 55.0 60.79 36.0 22.5 1.0 78 84 97 100 80 - 300
M39 4.0 60.0 66.44 39.0 25.0 1.0 84 90 103 110 90 - 300
M42 4.5 65.0 72.02 42.0 26.0 1.2 90 96 109 120 90 - 300
Dimensions in accordance with revised standards - in the process of being implemented.
* Also can be supplied in 5.8 and 6.8 as special.
ROHI International Complete Fastener Solutions
5
Hexagon Head Bolts / Screws DIN 931/933
Physical Properties:
PROPERTY CLASS 5.8 6.8 8.8 10.9
Diameter All Diameters All Diameters ≤M16 >M16 All Diameters
Unit N/mm2 N/mm
2 N/mm
2 N/mm
2 N/mm
2
Tensile Strength, (Min.) 520 600 800 830 1040
Yield Strength, 0.2% offset (Min.) 420 480 640 660 940
Proof Load Stress 380 440 580 600 830
Shear Strength, (Min.) 300 360 480 498 624
Hardness Rockwell
HR B82 - B99.5 B89 - B99.5 C22 - C32 C23 - C34 C32 - C39
Elongation % on GL= 5.65 √A (Min) A = Cross Sectional Area.
10 8 12 9
Recommended Tightening Torques and Induced Loads:
Nominal Thread
Size
Stress Area
5.8 * 6.8 * 8.8 10.9
Torque Induced
Load Torque
Induced Load
Torque Induced
Load Torque
Induced Load
mm2 Nm N Nm N Nm N Nm N
M6 20.1 6.42 5,348 7.43 6,188 10.3 9,005 15.1 13,230
M8 36.6 15.57 9,736 18.03 11,270 25.0 16,400 37.0 24,080
M10 58.0 30.85 15,428 35.70 17,850 50.0 26,360 74.0 38,700
M12 84.3 53.82 22,424 62.33 25,970 87.0 38,300 128.0 56,300
(M14) 115.0 85.65 30,590 99.18 35,420 139.0 52,300 205.0 76,800
M16 157.0 133.64 41,762 154.78 48,370 214.0 72,300 315.0 106,300
(M18) 192.0 183.86 51,072 212.94 59,150 304.0 91,200 435.0 129,900
M20 245.0 260.68 65,170 302.40 75,600 431.0 116,400 615.0 165,800
(M22) 303.0 354.63 80,598 409.64 93,100 586.0 144,000 835.0 205,100
M24 353.0 450.24 93,898 520.80 108,500 745.0 167,700 106.00 238,700
(M27) 459.0 657.72 122,094 763.56 141,400 109.00 218,100 155.00 310,400
M30 561.0 894.60 149,226 1037.40 172,900 148.00 266,600 210.50 379,400
(M33) 694.0 1219.68 184,604 1409.10 213,500 201.30 329,800 286.50 469,300
M36 817.0 1562.40 217,000 1809.36 251,300 258.60 388,200 368.00 552,500
(M39) 976.0 2025.66 259,700 2342.34 300,300 334.60 463,800 476.00 660,000
M42 1120.0 2502.53 297,920 2897.66 344,960 413.50 532,200 588.00 757,400
Note: * Special
The Tightening Torques are calculated to induce approximate stresses as detailed below:
266 N/mm2 for Property Class 5.8
308 N/mm2 for Property Class 6.8
448 N/mm2 for Property Class 8.8, dia ≤ M16
462 N/mm2 for Property Class 8.8, dia ≤ M16
658 N/mm2 for Property Class 10.9
ROHI International Complete Fastener Solutions
6
Hexagon Head Bolts / Screws - SAE J429
Inch Series, UNC/UNF - Dimensions
Note:
1. The bolts/screws will generally conform to SAE J429. (Bolts/Screws which will
also generally conform to American Standard ANSI B18.2.2.1)
2. Threads will conform to Class 2A of Unified threads(Coarse/Fine) of ANSI B1.1
3. Material: High grade carbon/alloy steel.
4. Heat Treatment: As per Grade „5‟ or „8‟ (Bolts/Screws made to Grades „5‟ and „8‟ as per SAE J429 will also
generally conform to requirements of BS 1768 Grade „S‟ and „V‟ respectively).
5. Thread Length LT:
LT1 for L ≤ 6
LT2 for L > 6
6. Screw Lengths equal to or shorter than those listed in column „LFT‟ will be fully threaded.
7. All dimensions are in inches.
Nominal Thread
Size
T.P.I W
Max.
C
Max.
B
Max.
H
Nom.
R
Min.
Length of Thread Length Range
L UNC UNF LT1 LT2 LFT
1/4" 20 28 0.4375 0.505 0.2500 0.156 0.015 3/4 - 1 1/2 - 4
5/16" 18 24 0.5000 0.577 0.3125 0.203 0.015 7/8 - 1.1/8 1/2 - 4
3/8" 16 24 0.5625 0.650 0.3750 0.234 0.015 1 - 1.1/4 1/2 - 4
7/16" 14 20 0.6250 0.722 0.4375 0.281 0.015 1.1/8 - 1.3/8 3/4 - 4
1/2" 13 20 0.7500 0.866 0.500 0.313 0.015 1.1/4 1.1/2 1.1/2 3/4 - 8
5/8" 11 18 0.9375 1.083 0.6250 0.391 0.020 1.1/2 1.3/4 1.7/8 1 - 8
3/4" 10 16 1.1250 1.300 0.7500 0.469 0.020 1.3/4 2 2.1/8 1.1/2 - 8
7/8" 9 14 1.3125 1.515 0.8750 0.547 0.040 2 2.1/4 2.3/8 1.1/2 - 8
1" 8 12 1.5000 1.732 1.0000 0.609 0.060 2.1/4 2.1/2 2.5/8 1.1/2 - 8
ROHI International Complete Fastener Solutions
7
Hexagon Head Bolts / Screws - SAE J429
Physical Properties:
Grade 5 Grade 8
Tensile Strength (Min.) psi
N/mm2
120000 150000
827 1034
Proof Load Stress psi
N/mm2
85000 120000
586 827
Elongation % on GL=2" (Min.) 14% 12%
Rockwell Hardness HR C25 – C34 C33 - C39
Reduction of Area % (Min.) 35% 35%
Recommended Tightening Torques and Induced Loads for UNC Threads:
Nominal Thread
Size
Stress Area
Grade 5 Grade 8
Torque Induced Load Torque Induced Load
UNC In2 ft. lb lbf ft. lb lbf
1/4" 0.0324 7.64 1930 11.06 2,794
5/16" 0.0532 15.68 3170 22.70 4,588
3/8" 0.0786 28.20 4750 40.83 6,875
7/16" 0.1078 45.13 6515 65.32 9,429
1/2" 0.1438 68.80 8691 99.58 12,578
5/8" 0.2290 135.23 14034 195.73 20,313
3/4" 0.3380 239.50 20715 316.67 29,982
7/8" 0.4670 386.08 28620 558.75 41,424
1" 0.6120 578.25 37507 836.92 51,287
Recommended Tightening Torques and Induced Loads for UNF Threads:
Nominal Thread
Size
Stress Area
Grade 5 Grade 8
Torque Induced Load Torque Induced Load
UNF In2 ft. lb lbf ft. lb lbf
1/4" 0.0368 8.68 2,192 12.57 3,174
5/16" 0.0587 17.31 3,498 25.05 5,062
3/8" 0.0886 31.79 5,354 46.01 7,749
7/16" 0.1196 50.15 7,240 72.58 10,478
1/2" 0.1612 77.13 9,742 113.19 14,298
5/8" 0.2580 152.36 15,812 220.50 22,884
3/4" 0.3750 265.75 22,982 384.58 33,262
7/8" 0.5130 424.08 31,440 613.83 45,503
1" 0.6670 630.17 40,878 912.08 59,163
Note: The Tightening Torques are calculated to induce stress equal to approximately 70% of
Yield Stress.
ROHI International Complete Fastener Solutions
8
High Strength Friction Grip Bolts (10.9 Gr.)
Standard Specification : BS 4395 Part 2 Equivalent to DIN 6914, 6915 Material : Alloy Steel Strength Grade : Class 10.9 Threads : 6H of BS 3643 Part 1 & 2 Surface Finish : Black, Hot Dipped Galvanized
DIMENSIONS HSFG BOLT
Nominal Size and thread
diameter
d
Pitch of thread
p
Diameter of unthreaded
shank d
Width across
flats s
Width across corner
Diameter of washer face
dt
Depth of washer
face c
Radius under
head r
Transition diameter
dn
Thickness of
head k
(Coarse Pitch
series) Max. Min. Max. Min.
Max.
Min. Max. Min. Max. Max. Min. Min. Max. Min.
M 12 M 16 M 20
M 22 M 24 M 27
M 30 M 36
1.75 2.0 2.5
2.5 3.0 3.0
3.5 4.0
12.70 16.70 20.84
22.84 24.84 27.84
30.84 37.00
11.30 15.30 19.16
21.16 23.16 26.16
29.16 35.00
22 27 32
36 41 46
50 60
21.16 26.16 31.00
35.00 40.00 45.00
49.00 58.80
25.4 31.2 35.9
41.6 47.3 53.1
57.7 69.3
23.70 29.30 35.03
39.55 45.20 50.85
55.37 66.44
22 27 32
36 41 46
50 60
19.91 24.91 29.75
33.75 38.75 43.75
47.75 57.75
0.4 0.4 0.4
0.4 0.5 0.5
0.5 0.5
1.00 1.00 1.20
1.20 1.20 1.50
1.50 1.50
0.6 0.6 0.8
0.8 0.8 1.0
1.0 1.0
14.7 18.7 23.24
25.24 27.24 30.84
33.84 40.00
8.45 10.45 13.90
14.90 15.90 17.90
22.05 24.05
7.55 9.55 12.10
13.10 14.10 16.10
17.95 21.95
ROHI International Complete Fastener Solutions
9
High Strength Friction Grip Bolts (10.9 Gr.)
Standard Specification : BS 4395 Part 2 Equivalent to DIN 6914, 6915
Material : Alloy Steel Strength Grade : Class 10.9 Threads : 6H of BS 3643 Part 1 & 2 Surface Finish : Black, Hot Dipped Galvanized
DIMENSIONS HSGG NUT
Nominal size and thread diameter
d
Pitch thread
p
Width across flats
s
Width across corner
e
Diameter of washer face
dt
Depth of
washer face e
Thickness of nut
m
(Coarse pitch series)
Max. Min. Max. Min. Max. Min. Max. Max. Min.
M 12 M 16 M 20
M 22 M 24 M 27
M 30 M 36
1.75 2.0 2.5
2.5 3.0 3.0
3.5 4.0
22 27 32
36 41 46
50 60
21.6 26.16 31.00
35.00 40.00 45.00
49.00 58.80
25.40 31.20 35.90
41.60 47.30 53.10
57.70 69.30
23.70 29.30 35.03
39.55 45.20 50.85
55.37 66.44
22 27 32
36 41 46
50 60
19.91 24.91 29.75
33.75 38.75 43.75
47.75 57.75
0.4 0.4 0.4
0.4 0.5 0.5
0.5 0.5
11.55 15.55 18.55
19.65 22.65 24.65
26.65 31.80
10.45 14.45 17.45
18.35 21.35 23.35
25.35 30.20
ROHI International Complete Fastener Solutions
10
ASTM A193 Stud / ASTM A194 Nut
Standard Specification : Stud - ASTM A193 Gr B7, B7M, B8, B8M Nut - ASTM A194 Gr 2H, 2HM, 8, 8M
Material : Alloy Steel / Stainless Steel 304/316 Strength Grade : Above Class 8.8 Surface Finish : Electro Galvanized, Hot Dipped Galvanized PTFE Coated / Natural
MATERIAL SPECIFICATION OF HIGH PRESSURE TEMPERATURE BOLTING
Grade
Material
Min Tempering Temperature
F (C)
Tensile strength
(Min.)
Yield strength
(Min.)
Elongation % (Min.)
Reduction % (Min.)
Brinell Hardness
Recommended Bolting
Temperature Range
Min. C Max. C
ASTM A193 Gr. B7 ASTM 4140, 4142,4145
1,100 (593 C) 125,000 psi 105,000 psi 16 50 -100 400
ASTM A193 Gr. B7M ASTM 4140, 4142,4145
1,150 (620 C) 100,000 psi 80,000 psi 18 50 235 Max. -100 400
ASTM A193 Gr. B16 Cr-Mo-Vanadium
1,200 (650 C) 125,000 psi 105,000 psi 18 50 0 520
ASTM A193 Gr. B8 AISI 304 Carbide Solution Treated
75,000 psi 30,000 psi 30 50 223 Max. -250 575
ASTM A193 Gr. B8M AISI 316 Carbide Solution Treated
75,000 psi 30,000 psi 30 50 223 Max. -250 600
DIMENSION FOR HEAVY HEXAGON NUTS ASTM A194 Gr 2H, 2HM, 8, 8M
Nom. Size d x n in.
B C H
Basic Min. Max. Min. Basic Max. Min.
1/2 x 13 22.22 21.59 25.65 24.61 12.3 12.8 11.78
5/8 x 11 26.98 26.19 31.16 29.84 15.47 16.02 14.91
3/4 x 10 31.75 30.78 36.65 35.10 18.65 19.25 18.03
7/8 x 9 36.51 35.41 42.16 40.36 21.82 22.47 21.16
1 x 8 41.27 40.0 47.65 45.62 25.00 25.70 24.28
1 1/8 x 8 46.03 44.60 53.16 50.85 28.17 28.93 27.41
1 1/4 x 8 50.8 49.22 58.65 56.11 30.95 31.77 30.15
1 1/2 x 8 59.4 58.70 67.90 67.40 37.00 37.50 36.50
ROHI International Complete Fastener Solutions
11
Stud Bolts ASTM A193
Inch Series. UNC/UN - Dimensions
Note:
1. The stud bolts will generally conform to ASTM A193 Gr. B7
2. Threads will conform to Class 2A of Unified Coarse threads as per ANSI B1.1
3. Material: Medium Carbon Chromium Molybdenum Steel, CR-Mo Alloy Steel (Cr-Mo).
4. Heat treatment: As per Grade „B7‟.
5. All dimensions are in inches.
Nominal Thread Size „D‟
TPI Length Range
„L‟
Nominal Thread Size „D‟
TPI Length Range
„L‟ UNC UN UNC UN
1/2" 13 - up to 230" 2 3/8" - 8 up to 50"
5/8" 11 - up to 230" 2 1/2" - 8 up to 60"
3/4" 10 - up to 230" 2 5/8" - 8 up to 60"
7/8" 9 - up to 230" 2 3/4" - 8 up to 60"
1" 8 - up to 120" 2 7/8" - 8 up to 60"
1 1/8" - 8 up to 120" 3" - 8 up to 48" *
1 1/4" - 8 up to 120" 3 1/8" - 8 up to 48" *
1 3/8" - 8 up to 120" 3 1/4" - 8 up to 48" *
1 1/2" - 8 up to 120" 3 3/8" - 8 up to 48" *
1 5/8" - 8 up to 120" 3 1/2" - 8 up to 48" *
1 3/4" - 8 up to 120" 3 5/8" - 8 up to 48" *
1 7/8" - 8 up to 120" 3 3/4" - 8 up to 48" *
2" - 8 up to 120" 3 7/8" - 8 up to 48" *
2 1/8" - 8 up to 60" 4" - 8 up to 48" *
2 1/4" - 8 up to 60" - - -
* Longer length than specified could be supplied against special order.
ROHI International Complete Fastener Solutions
12
Stud Bolts ASTM A193
Inch Series. UNC/UN - Physical Properties, Tightening Torques
Physical Properties:
Physical Properties Diameter Range Grade „B7‟
Tensile Strength (min.) Psi (N/mm
2)
2 1/2" and under 125,000 (860)
over 2 1/2" to 4" 115,000 (795)
Yield Strength (min.) Psi (N/ mm
2)
2 1/2" and under 105,000 (720)
over 2 1/2" to 4" 95,000 (655)
Elongation % on GL = 4D (min.) 2 1/2" and under
16% over 2 1/2" to 4"
Reduction of Area % (min.) 2 1/2" and under
50% over 2 1/2" to 4"
Tightening Torques:
Nominal Thread Size
Stress Area
GRADE „B7‟ Nominal Thread Size
Stress Area
GRADE „B7‟
Torque Induced Load Torque Induced Load
UNC 8 UN in2 ft - lb lbf UNC 8 UN in
2 ft - lb lbf
1/2" 0.142 86.98 10,437 2 3/8" 3.987 11,599.70 293,045
5/8" 0.226 173.03 16,611 2 1/2" 4.440 13,597.50 326,340
3/4" 0.334 306.86 24,549 2 5/8" 4.921 14,317.06 327,247
7/8" 0.462 495.21 33,957 2 3/4" 5.430 16,550.19 361,095
1" 0.606 742.35 44,541 2 7/8" 5.953 18,969.00 395,875
1 1/8" 0.790 1,088.72 58,065 3" 6.510 21,645.75 432,915
1 1/4" 1.000 1,531.25 73,500 3 1/8" 7.084 24,535.73 471,086
1 3/8" 1.233 2,076.82 90,625 3 1/4" 7.690 27,700.02 511,385
1 1/2" 1.492 2,741.55 109,662 3 3/8" 8.312 31,092.08 552,748
1 5/8" 1.780 3,543.31 130,830 3 1/2" 8.960 34,757.33 595,840
1 3/4" 2.080 4,459.00 152,880 3 5/8" 9.639 38,726.72 640,994
1 7/8" 2.410 5,535.47 177,135 3 3/4" 10.340 42,975.63 687,610
2" 2.770 6,786.50 203,595 3 7/8" 11.064 47,517.58 735,756
2 1/8" 3.152 8,205.05 231,672 4" 11.810 52,357.67 785,365
2 1/4" 3.560 9,812.25 261,660
Note:
The Tightening Torques are calculated to induce stress equal to approximately 70% of Yield Stress.
ROHI International Complete Fastener Solutions
13
Heavy Hexagon Nuts ASTM A563M
Metric Series - Dimensions, Physical Properties
Note:
1. The nuts will generally conform to ANSI B18.2.4.6M - Metric
Heavy Hexagonal Nuts.
2. Threads will conform to Class 6H of ANSI B1.13M for Coarse
Series.
3. Material & Heat Treatment.
To achieve mechanical properties of Property Class 8S or 10S of
ASTM A563M.
4. Nuts of Property Class 8S are used with bolts of ASTM A325M –
Type 1 and 2 (non-coated). Nuts of Property Class 10S are used
with bolts of ASTM A325M - Type 1 and 2 (Zinc-coated) (In
general, nuts of a higher property class can replace nuts of a
lower property class in a joint).
5. In Bolt/Nut assembly, tightening should be done by rotation of nut.
6. Sizes in brackets are non-preferred standards.
7. All dimensions are in millimeters.
Dimensions:
Thread Size Pitch W Max. C Max. H Nom.
M12 1.75 21.00 24.25 12.10
(M14) 2.00 24.00 27.71 13.95
M16 2.00 27.00 31.18 16.75
M20 2.50 34.00 39.26 20.05
(M22) 2.50 36.00 41.57 22.95
M24 3.00 41.00 47.34 23.55
(M27) 3.00 46.00 53.12 26.95
M30 3.50 50.00 57.74 29.90
Physical Properties:
Property Class
For use with Bolts of type and finish
Proof Load Stress N/mm
2
Rockwell Hardness
HR
8S
ASTM A325M Type 1 and 2 (non-coated)
1,075 B89 - C38
10S ASTM A325M Type 1 and 2 (zinc-coated)
1,245 (Normal Tapping)
1,165 (Oversize Tapping)
C26 - C38
ROHI International Complete Fastener Solutions
14
Heavy Hexagon Nuts ASTM A194
Note:
1. The nuts will generally conform to ANSI/ASME B18.2.2
Heavy Hex Nuts.
2. Threads will conform to Class 2B of ANSI B1.1
3. Material and Heat Treatment:
To achieve mechanical properties of Grade 2H and
4 which conform the requirements of ASTM A194.
4. In Bolt/Nut assembly, tightening should be done by
rotation of nut. Torque values as recommended in
tables for bolts.
5. All dimensions are in inches.
Dimensions:
Thread Size TPI
W Max. C Max. H Nom. UNC / UN
1/2" 13 0.875" 1.010" 0.484"
9/16" 12 0.938" 1.083" 0.547"
5/8" 11 1.062" 1.227" 0.609"
3/4" 10 1.250" 1.443" 0.734"
7/8" 9 1.438" 1.660" 0.859"
1" 8 1.625" 1.876" 0.984"
1 1/8" 8 1.812" 2.093" 1.109"
1 1/4" 8 2.000" 2.309" 1.219"
1 3/8" 8 2.188" 2.526" 1.344"
1 1/2" 8 2.375" 2.742" 1.469"
1 5/8" 8 2.562" 2.959" 1.594"
1 3/4" 8 2.750" 3.175" 1.719"
1 7/8" 8 2.938" 3.392" 1.844"
2" 8 3.125" 3.608" 1.969"
2 1/4" 8 3.500" 4.041" 2.203"
2 1/2" 8 3.875" 4.474" 2.453"
2 3/4" 8 4.250" 4.907" 2.703"
3" 8 4.625" 5.340" 2.953"
3 1/4" 8 5.000" 5.774" 3.188"
3 1/2" 8 5.375" 6.207" 3.438"
Physical Properties:
Grade Size
For use with Bolts/Stud Bolts
of Grade
Proof Load Stress psi
Rockwell Hardness HR
2H
up to 1 1/2" incl.
ASTM A325 T-1 ASTM A193 B7 ASTM A307 B
175,000
C24 - C38
over 1 1/2" B95 - C38
4 All Sizes
ASTM A320 L7
175,000 C24 - C38
ROHI International Complete Fastener Solutions
15
Hexagon Nuts DIN 934
Metric Series - Dimensions, Physical Properties Note:
1. The nuts will generally conform to ISO 4032, DIN 934, also DIN 555.
2. Threads will conform to Class 6H of ISO 965/2 for Coarse Series.
3. Material & Heat Treatment:
To achieve mechanical properties of Property Class 8 or 10.
4. Nuts of Property Class 8 are used with bolts of Property Class 8.8.
Nuts of Property Class 10 are used with bolts of Property Class 10.9.
(In general, nuts of a higher property class can replace nuts of a
lower property class in a joint).
5. In Bolt/Nut assembly, tightening should be done by rotation of nut.
6. Sizes in brackets are non-preferred standards.
7. All dimensions are in millimeters.
Dimensions: Nominal
Thread Size Pitch W Max. C Min. H Max.
M6 1.0 10.0 11.05 5.00
M8 1.25 13.0 14.38 6.50
M10 1.5 17.0 16.0 18.90 17.77 8.00
M12 1.75 19.0 18.0 21.10 20.03 10.00
(M14) 2.0 22.0 21.0 24.49 23.35 11.00
M16 2.0 24.0 26.75 13.00
(M18) 2.5 27.0 29.56 15.00
M20 2.5 30.0 32.95 16.00
(M22) 2.5 32.0 34.0 35.03 37.29 18.00
M24 3.0 36.0 39.55 19.00
(M27) 3.0 41.0 45.20 22.00
M30 3.5 46.0 50.85 24.00
(M33) 3.5 50.0 55.37 26.00
M36 4.0 55.0 60.79 29.00
(M39) 4.0 60.0 66.44 31.00
M42 4.5 65.0 71.30 34.00
Dimensions in accordance with revised standards in the process of being implemented.
Physical Properties:
Nut Size
Property Class 5 Property Class 6 Property Class 8 Property Class 10
Proof Load
Stress Hardness HR
Proof Load
Stress Hardness HR
Proof Load
Stress Hardness HR
Proof Load
Stress Hardness HR
Over To N/mm2 Min. Max. N/mm
2 Min. Max. N/mm
2 Min. Max. N/mm
2 Min. Max.
M4 M7 580
B71 C30
670
B79 C30
855
B92 C30
1040
C26 C36 M7 M10 590 680 870 1040
M10 M16 610 700 880 1050
M16 M42 630 B76 C30 720 B85 C30 920 B97 C36 1060
For use with Bolts of
Property Class 4.6, 5.6, 5.8 4.6, 5.6, 5.8, 6.8 4.6, 5.6, 5.8, 6.8 and 8.8 8.8 and 10.9
ROHI International Complete Fastener Solutions
16
Hexagon Nuts SAE J995
Note:
1. The nuts will generally conform to ANSI/ASME B18.2.2.
Threads will conform to Class 2B of ANSI B1.1
2. Material & Heat Treatment:
To achieve mechanical properties of Grade 5 or 8 of SAE J995
which conform the requirements of ASTM A563 Grade B or D.
SAE J995 Gr. 2 also conform the requirements of ASTM A563
Grade A.
3. In Bolt/Nut assembly, tightening should be done by rotation of
nut. Torque values as recommended in tables for bolts.
4. All dimensions are in inches.
Dimensions:
Nominal Thread Size
TPI W Max. C Max. H Max.
UNC UNF
1/4" 20 28 0.4380 0.505 0.219
5/16" 18 24 0.5000 0.577 0.266
3/8" 16 24 0.5620 0.650 0.328
7/16" 14 20 0.6880 0.794 0.375
1/2" 13 20 0.7500 0.866 0.4375
9/16" 12 18 0.8750 1.010 0.484
5/8" 11 18 0.9380 1.083 0.547
3/4" 10 16 1.1250 1.300 0.641
7/8" 9 14 1.3120 1.515 0.750
1" 8 12 1.5000 1.732 0.859
Physical Properties:
Grade Size For use with Bolts
of Grade Proof Load Stress
psi Rockwell Hardness
HR
2 1/4" - 1 1/2" SAE Gr. 2
ASTM A307 A,C 90,000 C32 (max)
5 1/4" - 1 SAE Gr. 5 120,000 C32 (max)
8
1/4" - 5/8"
SAE Gr. 8 150,000
C24 - C32
3/4" - 1" C26 - C34
ROHI International Complete Fastener Solutions
17
Hardened Plain Washers
Standard Specification : ASTM F436
Material : Medium Carbon Steel Type : Type 1 Hardness : HRC 38 to 45
Surface Finish : Black, Electro Galvanized, Hot Dipped Galvanized
Unit : mm
Nom. Size of Bolt
d D t
12 13 23 3.0
16 17 30 3.0
20 21 47 4.0
22 23 38 4.0
24 25 44 4.0
27 28 55 4.5
30 31 59 4.5
33 34 64 5.0
36 37 68 5.0
High Strength Plain Washers For Friction Grip Joints
Material : Medium Carbon Steel Strength Grade : F35
Hardness : HRC 38 to 45
Surface Finish : Black, Electro Galvanized, Hot Dipped Galvanized
Unit : mm
* Values as per DIN 6916
NomSize of
Bolt
d* D* t* C or R
Basic Max. Basic Min. Basic Min. Max. Approx.
12 13 13.27 24 23.48 3 3.3 2.7 1.5
16 17 17.27 30 29.48 4 4.3 3.7
20 21 21.33 37 36.38 4 4.3 3.7 2.0
22 23 23.33 39 38.38 4 4.3 3.7
24 25 25.33 44 43.38 4 4.3 3.7 2.4
27 28 28.52 50 49.00 5 5.6 4.4 2.5
30 31 31.62 56 54.80 5 5.6 4.4
36 37 37.62 66 64.80 6 6.6 5.4 3.0
ROHI International Complete Fastener Solutions
18
Direct Tension Indicators (DTIs)
Direct Tension Indicators (DTIs) are simple and extremely accurate devices for ensuring that
bolts have been installed above the specified minimum tension value. Used properly they
positively ensure the correct amount of clamping force. Readers who have installed high-
strength bolts using “torque/tension” values will notice that this manual does not relate torque to
tension. Torque, or twisting force, is not a reliable measure of bolt tension. DTIs measure
tension regardless of applied torque.
A DTI is a hardened, washer-shaped device with protrusions, bumps: pressed out on one face,
manufactured according to the provisions of ASTM F959. The fact that it resembles a washer is
incidental. It is, in fact, a precision made mechanical load cell, a device for tensioning which is
covered by an ASTM Standard.
When a DTI is installed on a bolt with the “bumps” placed against the underside of the bolt head
there are noticeable gaps between the “bumps.” As the nut is turned and the bolt tensioned, the
“bumps” flatten. When the “bumps” are flattened so that the gaps have been reduced to the
required dimension, the bolt has been properly tensioned and required clamping force is
present. A DTI does not make it more difficult to tension a bolt, it merely shows that the bolt has
been properly tensioned.
Direct Tension Indicators are supplied either “plain finish,” that is without a coating,
mechanically galvanized to ASTM B695 Class 50, or produced from “weathering steel” for use
with Type 3 high-strength bolts. Other coatings may be available upon inquiry.
ROHI International Complete Fastener Solutions
19
Hexagon Nuts SAE J995
THICKNESS
3 4 5 6 8 10 12 14 16 18 20 22 24 27 30 33 36 42
PIT
CH
COARSE 0.5 0.7 0.8 1 1.25 1.5 1.75 2 2 2.5 2.5 2.5 3 3 3.5 3.5 4 4.5
FINE 1 1
1.25 1.5
1.25 1.5 1.5 1.5 1.5 1.5
1.5 2
2 2 2.5 3 3
L E
N G
T H
5
8
10 ANY OTHER SIZE CAN BE SUPPLIED
12
14
16
20
25
30
35
40
45
50
55
60
65
70
75
80
85
90
95
100
110
120
130
140
150
160
170
180
190
200
220
250
300
ROHI International Complete Fastener Solutions
20
Inch Sizes
THICKNESS
3/16 1/4 5/16 3/8 7/16 1/2 9/16 5/8 3/4 7/8 1 1 1/8 1 1/4 1 1/2
PIT
CH
UNC 24 20 18 16 14 13 12
12 11 10 9 8 8 7 6
UNF 32 28 24 24 20 20 18 18 16 14 12 14
12 12
LE
NG
TH
1/2
5/8 ANY OTHER SIZE CAN BE SUPPLIED
3/4
7/8
1
1 1/4
1 1/2
1 3/4
2
2 1/4
2 1/2
2 3/4
3
3 1/4
3 1/2
3 3/4
4
4 1/2
5
5 1/2
6
6 1/2
7
8
9
10
11
12
Inch Equivalents
INCH METRIC INCH METRIC INCH METRIC INCH METRIC
1/32 0.7937 9/32 7.1437 17/32 13.4937 25/32 19.8437
1/16 1.5875 5/16 7.9375 9/16 14.2875 13/16 20.6375
3/32 2.3812 11/32 8.7312 19/32 15.0812 27/32 21.4312
1/8 3.1750 3/8 9.5250 5/8 15.8750 7/8 22.2250
5/32 3.9687 13/32 10.3187 21/32 16.0687 29/32 23.0187
3/16 4.7625 7/16 11.1125 11/16 17.4625 15/16 23.8125
7/32 5.5562 15/32 11.9062 23/32 18.2562 31/32 24.6062
1/4 6.3500 1/2 12.7000 3/4 19.0500 1 25.4000
ROHI International Complete Fastener Solutions
21
DIN Standards
ROHI International Complete Fastener Solutions
22
DIN Standards
ROHI International Complete Fastener Solutions
23
All Kinds of Screws
Grade Markings
INCH
GR.2
GR.5
GR.8
METRIC 4.6 8.8 10.9 12.9
ROHI International Complete Fastener Solutions
24
Technical Data CONVERSION CHARTS:
Rockwell
“C” Scale
Brinell
Hardness Number
Approx Tensile Strength
Rockwell “C” Scale
Rockwell “B” Scale
Brinell
Hardness Number
Approx Tensile Strength
MPa KSI MPa KSI
60 59
654 634
2320 2260
336 328
34 33
318 309
1030 1010
150 147
58 57
615 595
2200 2140
319 310
32 31
301 294
980 960
142 139
56 55
577 560
2080 2010
301 292
30 29
285 279
940 910
136 132
54 53
543 524
1950 1890
283 274
28 27
272 265
890 870
129 126
52 51
512 500
1830 1770
265 257
26 25
259 253
850 830
123 120
50 49
488 476
1720 1660
249 241
24 23
247 241
810 790
118 115
48 47
464 453
1610 1550
233 225
22 21
100 99
235 230
770 760
112 110
46 45
442 430
1510 1460
219 212
20 (19)
98 225 220
740 720
107 104
44 43
419 408
1420 1380
206 200
(18) (17)
97 215 210
710 700
103 102
42 41
398 387
1340 1300
194 188
(16) (15)
96 206 201
690 680
100 99
40 39
377 367
1250 1210
181 176
(14) (13)
95 94
197 193
670 660
97 96
38 37
357 347
1170 1140
170 165
(12) (11)
93 190 186
640 630
93 91
36 35
337 327
1100 1070
160 155
(10) (8)
92 90
183 179
620 600
90 87
Values in ( ) are - beyond the normal range and are given for information only
ROHI International Complete Fastener Solutions
25
Technical Data SI UNITS & CONVERSION FOR CHARACTERISTICS OF MECHANICAL FASTENERS:
Property Unit Symbol
Conversion
Approximate Equivalent
From To Multiply By
Length metre centimetre millimetre
m cm mm
inch inch foot
mm cm mm
25.4 2.54 304.8
25mm = 1 in. 300mm = 1 ft. 1m = 39.37 in.
Mass kilogram gram tonne megagram)
kg g t
ounce pound ton (2240 lb)
g kg kg
28.35 0.4536 984.2
28g= 1 oz. 1kg = 2.2 lb.= 35 oz 1t = 2206lbs
Density kilogram per cub. metre
kg/m3
pounds per cu. ft.
kg/mm3 16.02 16 kg/m
3 = 1 lb/ft
3
Temperature deg. celsius °C deg. Fahr. °C (° F - 32) x 5/9 °C = 32 °F 100 °C=212 °F
Area square metre square millimetre
m2
mm2
sq. inch. sq. ft.
mm2
m2
645.2 0.0929
645 mm2 = 1 in
2
1 m2 = 11ft
2
Volume cubic metre cubic centimetre cubic millimetre
m3
cm3
mm3
cu. in. cu. ft. cu. yd.
mm3
m3
m3
16387 0.02832 0.7645
16400mm
3 = 1 in
3
1 m3
= 35 ft3
1 m3
= 103 yd3
Force newton kilonewton meganewton
N kN MN
ounce (Force) pound (Force) Kip
N kN MN
0.278 0.00445 0.00445
1 N = 3.60 ozf 4.4 N = 1 lbt 1 kN = 225 lbt
Stress megapascal newton/mm
2
MPa N/mm
2
pound/in2 (psi-)
kip/in2 (ksi)
MPa MPa
0.0069 6.895
1 Mpa = 145 psi 7 Mpa = 1 ksi
Torque newton - metre N-m inch - ounce inch - pound foot - pound
N-m N-m N-m
0.00706 0.113 1.356
1 N-m = 140 in oz 1 N-m = 9 in lb 1 N-m = 0.75 ft.lbs 14 Nm = 1 ft lb
Note: 1 MPa = 1 N/mm2 1 KSI = 1.000 lb/in
2 1N = 0.1019 kgf
ROHI International Complete Fastener Solutions
26
Bent Bolts (Metric System)
``
ROHI International Complete Fastener Solutions
27
Anchor Bolts (Metric Series)
ROHI International Complete Fastener Solutions
28
ANCHOR THREAD
DIAMETER
DIMENSIONS mm CUTTING LENGTH mm
A B C D E F G H P Type
SQUARE PLATE
S SP SQ L J JE
L
L
L
CUT
LENGTH
L
CUT
LENGTH
L
CUT
LENGTH
L
CUT
LENGTH T W
12 40 16 40 45 100 - 50 29 10 75 330 330 355 381 355 455 410 530 - -
16 50 19 40 55 100 - 65 35 12 90 400 400 355 388 355 455 420 595 - -
20 60 22 50 70 150 50 75 39 12 90 480 480 405 443 405 485 485 695 355 565
22 70 25 50 75 150 55 80 48 16 100 570 570 460 506 460 545 545 790 415 660
24 85 28 55 90 200 65 90 55 20 100 700 700 510 560 510 610 610 890 475 735
27 - - 75 100 200 75 - - - - - - 560 619 560 675 673 990 535 935
30 100 36 75 115 200 85 110 64 20 125 820 820 610 674 610 735 735 1035 596 945
33 - - 90 125 200 90 - - - - - - - - 660 800 800 1125 655 1040
36 115 42 90 125 200 95 115 76 25 150 1010 1010 - - 710 865 865 1290 715 1130
39 - - 100 145 200 110 - - - - - - - - 760 925 925 1360 770 1225
42 130 49 115 150 255 120 130 85 25 175 1120 1120 - - 815 990 990 1475 830 1315
48 150 56 125 180 255 125 - - - - - - - - 915 1120 1120 1675 956 1510
56 170 63 140 200 255 145 - - - - - - - - 1015 1270 1245 1870 1070 1695
64 190 70 160 200 255 160 - - - - - - - - 1120 1375 1370 2070 1190 1910
Note: Material : ASTM A36/JIS G3123/SS41 or ANSI 1018 as available (where the required size is not available we use next size and
thread area will be machined down) to the required thread diameter.
Nuts : DIN 555 Class 5 or better (as available)
Surface Finish : Natural or Hot Dip Galv. (ASTM A153)
Anchor Bolts (Metric Series)
ROHI International Complete Fastener Solutions
29
Anchor Bolts (Inch Series)
Table 1 : ASTM A307, Grade A Bolt Sizes- Inch Series
Bolt Properties Type 1 Type 1S
Size
Type
Lt TPI
Stress Area
Max. Proj.
(note c)
hef min.
Length (L)
Edge Dist
Spacing
hef min. Length
(L) Edge Dist
Spacing
Sleeve
da 12da Proj.+hef
4da≥100
+da/2 6da SL+150
Proj.+hef
(note d) (note e) SD SL
(in) (in) (in2) (mm) (mm) (in) (mm) (mm) (mm) (in) (mm) (mm) (mm) (mm)
1/2 Hex 1.50 13 0.142 107 152 10 108 76 275 15 127 114 50 125
5/8 Hex 1.75 11 0.226 115 191 12 110 95 325 17 1/2 127 129 50 175
3/4 Hex 2.00 10 0.334 123 229 14 111 114 325 17 1/2 127 145 50 175
7/8 Hex 2.25 9 0.462 131 267 15 1/2 113 133 325 18 127 161 50 175
1 Hex 2.50 8 0.606 139 305 17 1/2 114 152 400 21 139 202 75 250
1-1/8 Hex 2.75 7 0.763 146 343 19 1/2 116 171 421 22 1/2 139 218 75 250
1-1/4 Hex 3.00 7 0.969 154 381 21 127 191 441 23 1/2 149 234 75 250
1-3/8 Hex 3.25 6 1.155 162 419 23 140 210 460 24 1/2 160 250 75 250
1-1/2 Hex 3.50 6 1.405 170 457 24 1/2 152 229 604 30 1/2 183 291 100 375
1-3/4 Heavy Hex 4.00 5 1.899 186 533 28 1/2 178 267 642 32 1/2 206 322 100 375
2 Heavy Hex 4.50 4.5 2.498 202 610 32 203 305 755 37 1/2 228 354 100 450
2-1/4 Heavy Hex 5.00 4.5 3.248 218 686 35 1/2 229 343 793 40 250 386 100 450
2-1/2 Heavy Hex 5.50 4 3.999 234 762 39 254 381 981 48 297 468 150 600
2-3/4 Heavy Hex 6.00 4 4.934 250 838 43 279 419 1019 50 319 499 150 600
3 Heavy Hex 6.50 4 5.967 266 914 46 1/2 305 457 1057 52 342 531 150 600
ROHI International Complete Fastener Solutions
30
Anchor Bolts (Inch Series)
Table 2 : ASTM A36, ASTM F1554 Grade 36 Anchor Rods - Inch Series
Bolt Properties Type 2 Type 2S
Size
TPI
Stress Area
L1 T1 hef
min. Edge Dist Spacing
hef min.
Edge Dist
Spacing Sleeve
da da+13 2da 12da 4da≥100+da/2 6da SL+150 (note b) (note c) SD SL
(in) (in2) (mm) (mm) (mm) (mm) (mm) (mm) (mm) (mm) (mm) (mm)
1/2 13 0.142 26 25 152 108 76 275 127 114 50 125
5/8 11 0.226 29 32 191 110 95 325 127 129 50 175
3/4 10 0.334 32 38 229 111 114 325 127 145 50 175
7/8 9 0.462 35 44 267 113 133 325 127 161 50 175
1 8 0.606 38 51 305 114 152 400 139 202 75 250
1-1/8 7 0.763 42 57 343 116 171 421 139 218 75 250
1-1/4 7 0.969 45 64 381 127 191 441 149 234 75 250
1-3/8 6 1.155 48 70 419 140 210 460 160 250 75 250
1-1/2 6 1.405 51 76 457 152 229 604 183 291 100 375
1-3/4 5 1.899 57 89 533 178 267 642 206 322 100 375
2 4.5 2.498 64 102 610 203 305 755 228 354 100 450
2-1/4 4.5 3.248 70 114 686 229 343 793 250 386 100 450
2-1/2 4.0 3.999 77 127 762 254 381 981 297 468 150 600
2-3/4 4.0 4.934 83 140 838 279 419 1019 319 499 150 600
3 4.0 5.967 89 152 914 305 457 1057 342 531 150 600
ROHI International Complete Fastener Solutions
31
Anchor Bolts (Metric Series)
Table 2M - ASTM A36 Anchor Rods - Metric
Bolt Properties Type 2 Type 2S
Nominal Dia (da) &
Thread Pitch
Stress Area
L1 T1 hef
min. Edge Dist Spacing
hef min.
Edge Dist
Spacing Sleeve
da+13 2da 12da 4da≥100+da/2 6da SL+150 (note b) (note c) SD SL
(mm) (mm2) (mm) (mm) (mm) (mm) (mm) (mm) (mm) (mm) (mm) (mm)
M12 x 1.75 84.3 25 24 144 106 72 275 125 110 50 125
M16 x 2 157 29 32 192 108 96 275 125 130 50 125
M20 x 2.5 245 33 40 240 110 120 325 125 150 50 175
M24 x 3 353 37 48 288 112 144 400 138 195 75 250
M27 x 3 459 40 54 324 114 162 400 138 210 75 250
M30 x 3.5 561 43 60 360 120 180 400 143 225 75 250
M36 x 4 817 49 72 432 144 216 525 176 280 100 375
M42 x 4.5 1120 55 84 504 168 252 525 197 310 100 375
M48 x 5 1470 61 96 576 192 288 600 218 340 100 450
M56 x 5.5 2030 69 112 672 224 336 672 246 380 100 450
M64 x 6 2680 77 128 768 256 384 768 299 470 150 600
M72 x 6 3460 85 144 864 288 432 864 327 510 150 600
ROHI International Complete Fastener Solutions
32
Anchor Bolts (Metric Series)
Table 3M - ASTM A193M Anchor Rods - Metric
Bolt Properties Type 3 Type 3S
Nominal Dia (da) &
Thread Pitch
Stress Area
L1 T1 hef
min. Edge Dist Spacing
hef min.
Edge Dist
Spacing Sleeve
2da+13 3da 12da 6da≥100+da/2 6da SL+150 (note b) (note c) SD SL
(mm) (mm2) (mm) (mm) (mm) (mm) (mm) (mm) (mm) (mm) (mm) (mm)
M12 x 1.75 84.3 37 36 144 106 72 275 125 110 50 125
M16 x 2 157 45 48 192 108 96 275 125 130 50 125
M20 x 2.5 245 53 60 240 120 120 325 135 150 50 175
M24 x 3 353 61 72 288 144 144 400 140 195 75 250
M27 x 3 459 67 81 324 162 162 400 186 210 75 250
M30 x 3.5 561 73 90 360 180 180 400 203 225 75 250
M36 x 4 817 85 108 432 216 216 525 248 280 100 375
M42 x 4.5 1120 97 126 504 252 252 525 281 310 100 375
M48 x 5 1470 109 144 576 288 288 600 314 340 100 450
M56 x 5.5 2030 125 168 672 336 336 672 358 380 100 450
M64 x 6 2680 141 192 768 384 384 768 427 470 150 600
M72 x 6 3460 157 216 864 432 432 864 471 510 150 600
ROHI International Complete Fastener Solutions
33
Anchor Bolt Sleeve
Technical Data:
See Table 1 for material test data. Each Sleeve is approximately twice the bolt diameter with a depth of 8 bolt diameters, minimum Tests by a state Department of Transportation laboratory indicates that the Wilson Anchor Bolt Sleeve provided greater pullout strength than the regular grout pocket. The grout pocket was formed in a concrete mass and the sleeve of the same size was cast into the mass. After curing the concrete, #5 reinforcing bars were set in each pocket, using expanding grout. When cured, both bars were given a tensile load. The standard pocket failed when the bar with the grout attached pulled out. The Wilson Anchor Bolt Sleeve retained the grout and failure occurred around the bar. The sleeve remained intact. When used as a sleeve for anchor bolts the product is in an in-place form and not considered a structural member. Due to its configuration 180 psi is the maximum compressive loading.
Table 1: Material and Testing Data
Plastic High Density Polyethylene
Density, gms/cc ASTM D 1505 - 68 .956
Vicat Softening Point oF ASTM D 1525 - 70 256
oF / 124
oC
Brittleness Temperature oF ASTM D 746 -70 -180
oF / -118
oC
Torch Application Slow Burn
Compression Test 180 psi/12.7 kg/sq. cm.
Table 2: Grout Volume Required
Bolt Size
Bolt Size
Shells Per Carton
Cubic Inches of Grout Per Shell/Carton
Bags of Grout Per Carton
1/2" 2" x.5" 100 15.95 1595 1.06
3/4" 2" x.5" 100 15.16 1516 1.11
5/8" 2" x.7" 100 21.41 2141 1.42
3/4" 2" x.7" 100 20.50 2050 1.36
7/8" 2" x.7" 100 19.52 1952 1.30
1" 3" x.10" 50 65.80 3290 2.19
1-1/4" 3" x.10" 50 61.40 3070 2.04
1-1/2" 4" x.15" 20 167.60 3352 2.23
1-3/4" 4" x.15" 20 158.00 3160 2.11
2" 4" x.18" 20 176.76 3525 2.35
2-1/4" 4" x.18" 20 161.82 3236 2.15
2-1/2" 6" x.24" 10 575.28 5753 3.82
3" 6" x.24" 10 523.44 5235 3.48
NOTE: Grout Estimate based on .87 cu. ft. yield per 100 lb. of non-corrosive grout.
Composition and Materials:
The Wilson Anchor Bolt Sleeve is manufactured of high impact plastic. It is non-rusting, non-conductive and lightweight. Single unit construction provides for reduction in installation labor because no welding, threading or cleaning is required. The configuration is such that the grout and concrete "lock" it in place, providing greater pullout strength than with straight pipes.
ROHI International Complete Fastener Solutions
34
U Bolts
Fabricated as per Client‟s Drawing in Carbon Steel
(Natural / EG / HDG Finish) and in Stainless Steel 304/316
„U‟ BOLT (GRIPPED)
Material - Carbon Steel. Complete with 2 nuts
Nom Pipe Size
Pipe O/D
A C D T L Max Load Kg
15 21.3 7 28 6 25 37 220
20 26.9 10 33 6 25 40 220
25 33.7 10 40 6 25 43 220
32 42.4 10 53 10 35 49 545
40 48.3 16 60 10 35 56 545
50 60.3 16 71 10 35 60 545
65 76.1 20 89 12 40 78 1000
80 88.9 20 102 12 40 85 1000
90 101.6 20 116 12 40 90 1000
100 114.3 20 128 12 40 97 1000
125 139.7 20 152 12 40 110 1000
150 168.3 20 182 12 40 125 1000
200 219.1 20 236 16 40 154 1635
225 244.5 20 266 20 50 173 3405
250 273.0 22 294 20 50 185 3405
300 323.9 22 346 20 50 210 3405
350 355.6 24 378 20 55 230 3405
400 406.4 24 429 20 55 255 3405
450 451 24 483 24 55 280 4450
500 508 24 534 24 60 305 4450
550 559 24 585 24 60 335 4450
600 610 24 636 24 60 360 4450
ROHI International Complete Fastener Solutions
35
U Bolts
Fabricated as per Client‟s Drawing in Carbon Steel
(Natural / EG / HDG Finish) and in Stainless Steel 304/316
„U‟ BOLT (NON GRIPPED)
Material - Carbon Steel.
Complete with 4 nuts
Nom Pipe Size
Pipe O/D
A C D T L Max Load Kg
15 21.3 10 30 6 60 65 220
20 26.9 10 35 6 60 68 220
25 33.7 10 42 6 65 70 220
32 42.4 10 54 10 65 74 545
40 48.3 16 62 10 65 78 545
50 60.3 16 74 10 65 84 545
65 76.1 20 90 12 80 92 1000
80 88.9 20 106 12 80 100 1000
90 101.6 20 116 12 80 109 1000
100 114.3 20 128 12 80 114 1000
125 139.7 20 155 12 80 129 1000
150 168.3 20 189 16 100 154 1635
200 219.1 20 238 16 100 176 1635
225 244.5 20 268 20 110 187 3405
250 273.0 22 296 20 110 213 3405
300 323.9 22 348 20 110 246 3405
350 355.6 24 380 20 110 260 3405
400 406.4 24 431 20 110 285 3405
450 457.0 24 484 24 120 320 4450
500 508.0 24 536 24 120 345 4450
550 559.0 24 586 24 120 373 4450
600 610.0 24 638 24 120 400 4450
ROHI International Complete Fastener Solutions
36
Pipe Clip
Carbon Steel (Galvanized / Coated Finish) and in Stainless Steel 304/316 (Moderate Loads)
(Heavy Loads)
Nom Pipe Size
Pipe O/D
A B C D Steel Size F
G H
15 21.3 92 32 12 M12 30 x 6 107 47
20 26.9 95 38 12 M12 30 x 6 110 53
25 33.7 97 44 12 M12 30 x 6 112 59
32 42.4 102 49 12 M12 30 x 6 117 64
40 48.3 102 46 25 M12 30 x 6 124 68
50 60.3 127 54 25 M12 30 x 6 149 76
65 76.1 140 67 25 M12 45 x 8 162 89
80 88.9 152 76 25 M12 45 x 8 175 99
90 101.6 159 82 25 M12 45 x 8 181 104
100 114.3 165 100 25 M16 50 x 10 194 129
125 139.7 178 114 25 M16 50 x 10 206 142
150 168.3 216 135 38 M20 65 x 10 254 173
175 193.7 230 150 38 M20 65 x 10 268 188
200 219.1 241 163 38 M20 65 x 10 279 201
225 244.5 265 180 38 M20 65 x 12 303 218
250 273.0 279 192 38 M20 65 x 12 317 230
300 323.9 305 220 38 M20 65 x 12 343 258
350 355.6 330 243 51 M24 80 x 15 378 291
400 406.4 356 273 51 M24 80 x 15 403 320
450 457.2 381 300 51 M24 80 x 15 429 348
500 508.0 406 329 51 M24 80 x 20 457 380
550 558.0 432 365 51 M24 100 x 20 489 422
600 610.0 457 390 51 M24 100 x 20 514 447
650 660.4 559 431 51 M30 130 x 25 622 494
700 711.2 585 457 51 M30 130 x 25 648 520
750 762.0 610 482 51 M30 130 x 25 673 545
800 812.8 647 508 51 M30 130 x 25 710 571
900 914.4 699 560 51 M30 130 x 25 762 623
Nom PipeSize
Pipe O/D
A B C D Steel Size F
G H
150 168.3 229 143 44 M30 100 x 12 279 193
175 193.7 241 158 44 M30 110 x 12 291 208
200 219.1 254 172 44 M30 110 x 12 305 220
225 244.5 305 198 51 M36 100 x 20 356 258
250 273.0 305 214 51 M36 100 x 20 356 265
300 323.9 330 240 51 M36 100 x 20 381 291
350 355.6 356 262 57 M42 110 x 20 413 319
400 406.4 381 292 57 M42 110 x 25 438 349
450 457.0 406 317 57 M42 110 x 25 464 375
500 508.0 457 353 57 M42 130 x 25 521 417
550 558.8 483 393 57 M42 150 x 30 559 469
600 610.0 508 418 57 M42 150 x 30 584 494
650 660.4 581 443 57 M42 150 x 30 657 519
700 711.2 610 472 57 M42 150 x 30 686 548
750 762.0 635 497 57 M42 150 x 30 711 573
800 812.8 661 525 57 M42 150 x 30 734 601
900 914.4 711 575 57 M42 150 x 30 787 631
ROHI International Complete Fastener Solutions
37
Pipe Clamps
Carbon Steel (Galvanized / Coated Finish) and
in Stainless Steel 304/316
EXTENDED PIPE CLAMP OFFSET PIPE CLAMP
Nom Pipe Size
Pipe O/D
B D Steel Size F
20 26.9 115 M10 25 x 6
25 33.7 125 M10 30 x 6
32 42.4 130 M10 30 x 6
40 48.3 135 M10 30 x 6
50 60.3 158 M12 40 x 6
65 76.1 190 M12 40 x 6
80 88.9 206 M12 40 x 6
90 101.6 219 M12 40 x 6
100 114.3 241 M12 40 x 6
125 139.7 273 M12 40 x 6
150 168.3 330 M16 50 x 10
200 219.1 380 M16 50 x 10
Material - Carbon Steel Material - Carbon Steel Standard length supplied 300 mm Standard clearance 50 mm from back of pipe to Longer legs supplied by request. wall or floor line.
S.W. Loads to suit specific applications S.W. Loads to suit specific applications
Nom Pipe Size
Pipe O/D
B D H G Steel Size F
20 26.9 185 M10 65 12 25 x 6
25 33.7 190 M10 65 12 30 x 6
32 42.4 200 M10 70 12 30 x 6
40 48.3 210 M10 75 12 30 x 6
50 60.3 230 M12 80 14 40 x 6
65 76.1 265 M12 85 14 40 x 6
80 88.9 280 M12 95 14 40 x 6
90 101.6 295 M12 100 14 40 x 6
100 114.3 315 M12 105 14 40 x 6
125 139.7 350 M12 120 14 40 x 6
150 168.3 420 M16 135 18 50 x 10
200 219.1 475 M16 160 18 50 x 10
ROHI International Complete Fastener Solutions
38
Adjustable Pipe Supports
Carbon Steel (Galvanized Finish)
ADJUSTABLE PIPE SUPPORT
Nom Pipe Size
Pipe O/D
Pipe A-NB
B C D L
E PCD H Max Load Kg Min Max
65 76.1 50 48 150 M48 398 1750 184 110 14 75
80 88.9 50 55 150 M48 405 1750 191 110 14 110
90 101.6 80 61 200 M48 411 1750 197 150 18 150
100 114.3 80 67 200 50NB 420 1750 196 150 18 200
125 139.7 80 80 200 50NB 434 1750 208 150 18 305
150 168.3 100 94 280 65NB 450 1750 223 200 18 435
200 219.1 100 120 280 65NB 476 1750 249 200 18 725
250 273.0 100 147 280 65NB 503 1400 276 200 18 1250
300 323.9 100 172 280 65NB 529 1400 302 200 18 1785
350 355.6 100 188 280 65NB 545 1400 318 200 18 2300
400 406.4 100 214 280 65NB 570 1400 343 200 18 3190
450 457.0 150 240 350 100NB 603 1400 370 240 22 4150
500 508.0 150 264 350 100NB 627 1400 395 240 22 5310
550 558.8 150 290 350 100NB 652 1400 421 240 22 6650
600 610.0 150 315 350 100NB 678 1400 446 240 22 7985
650 660.4 150 340 350 100NB 703 1400 471 240 22 9730
700 711.2 150 366 350 100NB 729 1400 497 240 22 11470
750 762.0 150 391 350 100NB 781 1000 522 240 22 13210
800 812.8 150 417 350 100NB 816 1000 548 240 22 15370
900 914.4 150 468 350 100NB 832 1000 600 240 22 19680
Material – Carbon Steel
ROHI International Complete Fastener Solutions
39