Post on 29-Nov-2015
description
APPLICATION OF DISTRIBUTED CONTROL SYSTEMIN CEMENT MANUFACTURING PROCESS
INDUSTRIAL TRAINING PROJECT
WORKING SYSTEM IS
DCS ABB-800XA
ABSTRACT
In modern days, infrastructure plays a vital role, so high efficiency in cement manufacturing is required.
Computer based automation is the best technique for the above function.
The controlling is done best using the Distributed control system concept.
DCS is faster, reliable and has many helpful features to its credit.
It enables you to manage the process as a complete system, with control over the interrelationship of the various subsystems.
Overall Cement manufacturing process
CRUSHING
GRINDING
BLENDING SILO
PREHEATER
KILN
COOLER
CLINKER STORAGE
MILLING
CEMENT STORAGE
OBJECTIVE
Main objective of our project is to control the basic process block of cement manufacturing plant using a single control desk using DCS (ABB-800 XA system) version 5.0.2 SP2.800 XA
Limestone crusher and transportation to stocker Raw mill Coal mill Baghouse auxalliries Field transducers Central control room
DCS Overview
Field control station ( FCS )
POWER SUPPLYCPUINPUT/OUTPUT MODULES
Human interface station ( HIS )
HIS is mainly used for operation and monitoring purposes
It displays process variables, control parameters, and alarms
Users can quickly grasp the operating status of the plant
COMMUNICATION BUS
For redundancy, L2switch is used
DCS ABB-800XA SYSTEM ARCHITECTURE
DCS ABB-800XA SYSTEM OVERVIEW
• ABB-DCS 800 XA Automation system, Version 5.0.2. SP2 .800XA Installed at BJCL is the extended version of ABB which consist the AC800M control module, Aspect and connectivity server, Engineering station, Operating Stations.
• AC 800M is a family of rail-mounted modules, consisting of:- • Power Supply• CPU-PM864A• Communication Module-Profibus (CI854A) and Modbus (CI853).• Remote Units-Digital Input Card(DI810),Digital Output
Card(DO810),Analog Input Card(AI 810),Analog Output Card(AO810)
Contd…
• ABB 800XA network is divided into three parts• 1. Field Network
• Field network consist the data transmission from the field instrument to remote IOs as well as from remote IOs to Controller. Fibre optics communication is major mode of communication for field network.
• • 2. Control Network• • Control network is basically a communication between controllers and
Connectivity server; we use Ethernet cable as a communication media. We are having two connectivity servers and two control network to provide redundant system.
• • 3. Plant Network• Plant Network is basically a Domain controlled network where domain
definitions are defined in Aspect server and all plant system are connected to this. We are using two Aspect servers to provide redundancy to the process.
• The plant operation is monitored & controlled in automatic mode by operators from central control room (CCR). There are four operating stations works on high speed Ethernet network and with levels of permission to operate any section of plant from any one of the operator stations
Cont.• Five nos. Process controllers (PM864A), which are located in the CCR. The
remote IO panels are located adjacent to MCC room in Load centres.
• All motor feeders in the MCC/Drives /Sub control system can be selected in local, Central and Seq. mode. In local mode basically testing of drive from the field is carried out after taking permission from the operator. In central mode drive can be started individually from CCR and also in seq mode as per group sequential interlocks and all sequential interlocks are as per process requirement.
• The process, machine safety and upstream/downstream sequential
interlocks are applied to the machines as per the Block Interlocking diagram which is supplied from machinery supplier.
• The processors of Process controller are having self-diagnostics features
to ensure healthy working all times, if any fault and process stop warning appears; it gives advance warning in form of alarm and is audio visual.
800XA software along with controller is having following features:-
• Totalizer, Ratio controlling, PID controlling multi variable control etc.
• These are the some examples of PID controlling:- • Cooler fans speed control V/S Fan flow• PC firing feed control V/S Cyclone top temperature.• Cooler ID fan Speed V/S Kiln Hood Draft
• Operation of L/S stacker and reclaimer is interfaced through radio link to 800XA and stacking and reclaiming operation are controlled in automatic mode for better blending.
Programmable Controller(PC)– System run by programmable controller works in much a same
way : • - Input sensing devices report machine conditions • - Output devices respond to commands. • Wiring between the machine & the controller provides electric paths
from the sensing devices to the controller and from the controller to the output devices
THE FOUR MAJOR SECTIONS IN PROCESS
• CONTROLLER:-• Processor (PM864)• Communication Card-Profibus and Modbus• Power Supply
Communication Card-Profibus and Modbus
Contd.
• PROFIBUS:- Profibus is a type of field bus through which remote
Input/output as well as Field bus transmitters are connected.
PROFIBUS DP (Decentralized Peripherals) is used to
operate sensors and actuators via a centralized controller in production (factory) automation applications
PROFIBUS PA (Process Automation) is used to
monitor measuring equipment via a process control system in process automation applications
PA has a data transmission rate of 31.25 kbit/s.
MODBUS• Modbus is serial link communication to
communicate to energy measuring device• An open data communication protocol• Supplied by many SCADA and HMI software• 2 serial transmission modes:
– ASCII 10 bits– RTU (Binary) 11 bits
• Communication interface– RS-232/485
– Ethernet (TCP/IP)
SCADA :
Through the help of SCADA the operation of Plant is executed and this is configured with the help of Functional Structure
ALARM AND EVENT COLLECTOR 800 XA SYSTEMS HAS THE PROVISION TO STORE
ALARM AND EVENT OF THE PLANT OPERATION.
We can plot the trend of Analog process variables and keep its record for 3 months
TRENDS ANALYSIS THROUGH DCS
PROGRAMMING TECHNIQUES
• Functional Block Diagram• Ladder logic• Structured Text Logic•
Logic chart for kiln rotary motor
Function block diagram for kiln speed ctrl
Kiln Graphic window
CONCLUSION
The DCS with its prominent advantages over conventional systems has become indispensable equipment in the field of industrial automation. It has enhanced plant safety and also user friendliness in operation thereby reducing human errors. Due to these reasons the production rate has increased around 20%.
The controlling of cement manufacturing plant critical parameters using DCS thus has led to achievement of greater output at the rate of standard cost.
Thank U