Post on 05-Sep-2020
www.datek.no
Datek Dream Module
Datek Dream module is a module based on the Ember EM3585 chip. It can handle both the Zigbee and Thread stack. With a powerful MCU and flexible IO’s it’s easily implemented into a design in need of a 2.4GHz radio. It can be put into sleep with a power consumption as low as 1uA and has a peak power consumption at 150 mA. It is made to be both pin compatible and function compatible with the telegesis modules, but has an integrated button with led.
Datek Dream Module
Example applicationsThe Datek Dream module is designed for use wherever
ZigBee radio technology can be deployed for example:
Datek Wireless AS, Storgata 6, N2000 Lillestrøm.
Tel: +47 920 38 000 E-mail: info@datek.no Web: www.datek.no
Product and Company names and logos referenced may either be trademarks or registered trademarks of their respective companies. All information is correct at time of issue. Datek Wireless AS reserves the right to make modifications and/or improvements without prior notification. © 2017-02-02
bnbnbnnn
■ Smart Metering products
■ Home Automation solutions
■ Smart Lighting and Building Control systems
■ Medical and Home Healthcare devices
SMT module 25mm x 19mm 512kB flash and 32kB of RAM 2.4GHz ISM Band
16 channels (802.15.4 Channels 11 to 26)
+3dBm output power (+8dBm in boost mode)
Every module can act as an End Device, Router or Coordinator
Operating temperature range: -40°C to +85°C
High sensitivity of -99dBm (-101dBm in boost mode) typ. @ 1% packet error rate
Lowest Deep Sleep Current of sub 1μA and multiple sleep modes
Wide supply voltage range (2.1 to 3.6V) RX Current: 25mA, TX Current: 31mA at 3dBm
250kbit/s over the air data rate
2 antenna options: Integrated chip antenna or U.FL coaxial connector
24 general-purpose I/O lines including analogue inputs (all GPIOs of the EM3585 SoC are accessible)
Side castellations for easy soldering
Hardware supportedencryption (AES-128)
Industry standard JTAG programming and real time network level debugging via the Ember InSight Port
Firmware upgrades via serial port or over the air (password protected)
Radio features
Exceptional RF PerformanceSilicon Labs EM3585
Module features
The Datek Dream Module is a low power ZigBee module, based on the latest Ember EM3585 ZigBee / IEEE802.15.4 solution from Silicon Laboratories.
The EM3585 chip is a single-chip, high-performance 2.4 GHz ZigBee transceiver and ARM® Cortex®-M3 processor integrated with the rigorously tested and field-proven EmberZNet ZigBee PRO networking protocol stack. This ZigBee software sets the bar for ZigBee stack reliability and has been used in more announced products than any other ZigBee stack.
Based on the best in class EM357 the EM3585 boasts 512kB flash memory and 32kB RAM.
The Datek Dream Module has been designed to be integrated into any device without the need for RF experience and expertise and lets you add powerful wireless networking capability to your products easily and bring them to market quickly. Custom application firmware can be developed on the Datek Dream Module module using Ember EM358x development kits which provide all of the hardware and software tools needed for application development in cost-effective and convenient kits integrated into Ember’s InSight development environment.
ETRX3587 module
Programmable Pushbutton for pairing or other functionality. Combined with a LED that can indicate action or Happening
Space for optional U.fl. connector for use with external antenna
Integratedantenna