Post on 25-Jun-2020
®
Custom Stainless Steel Shower Base
145 Dixon Avenue, Amityville, NY 11701 • 516.767.6786 • www.infinitydrain.com
Made in the U.S.A.
Linear drain option Integrated drain body. With or without curb. Pre-sloped. Ready to Tile.
Integrated drain body.
Infinity Drain® Custom Stainless Steel Shower Bases
Features: • Stainless Steel shower pan is completely waterproof.
• No need for additional floor waterproofing.
• Ready to tile.
• Linear drain or center drain option.
• Curb or curbless option.
• 25 year waterproofing warranty.
• Custom Sizing
Additional Features:• Integrated drain body (linear or center).
• With a 6” sleeve on foundation, the 2” No hub
connection through slab allows for 2” variance in
any direction.
• Shower floor sets shower framing for exact wall to
wall installation.
• Instead of building a shower, install a receptacle
similar to a tub.
APPROVAL
Polished Stainless Satin BronzeMatte BlackMatte WhiteOil Rubbed BronzeSatin StainlessDimension
Other:
CA B Finish:
B
2
Stainless Steel Shower Pan
Infinity Drain145 Dixon AvenueAmityville, NY 11701P: 516.767.6786F: 516.740.3066www.InfinityDrain.com
Proprietary and ConfidentialThis design and drawing are the property of Infinity Drain LTD. and must be surrendered upon request. Its contents are submitted for reference only, and may not be reproduced
or used in any other manner unless specifically authorized by an official representative of Infinity Drain LTD.
Drawn by: BR 2/12/18
Material Type
Material Thickness
APPROVAL
Polished Stainless Satin BronzeMatte BlackMatte WhiteOil Rubbed BronzeSatin StainlessDimension
Other:
CA B Finish:
B
2
Stainless Steel Shower Pan
Infinity Drain145 Dixon AvenueAmityville, NY 11701P: 516.767.6786F: 516.740.3066www.InfinityDrain.com
Proprietary and ConfidentialThis design and drawing are the property of Infinity Drain LTD. and must be surrendered upon request. Its contents are submitted for reference only, and may not be reproduced
or used in any other manner unless specifically authorized by an official representative of Infinity Drain LTD.
Drawn by: BR 2/12/18
Material Type
Material Thickness
APPROVAL
Polished Stainless Satin BronzeMatte BlackMatte WhiteOil Rubbed BronzeSatin StainlessDimension
Other:
CA B Finish:
B
2
Stainless Steel Shower Pan
Infinity Drain145 Dixon AvenueAmityville, NY 11701P: 516.767.6786F: 516.740.3066www.InfinityDrain.com
Proprietary and ConfidentialThis design and drawing are the property of Infinity Drain LTD. and must be surrendered upon request. Its contents are submitted for reference only, and may not be reproduced
or used in any other manner unless specifically authorized by an official representative of Infinity Drain LTD.
Drawn by: BR 2/12/18
Material Type
Material Thickness
With or without curb. Pre-sloped. Ready to Tile.
Integrated drain body.
Infinity Drain® Custom Stainless Steel Shower Bases
Features: • Stainless Steel shower pan is completely waterproof.
• No need for additional floor waterproofing.
• Ready to tile.
• Linear drain or center drain option.
• Curb or curbless option.
• 25 year waterproofing warranty.
• Custom Sizing
Additional Features:• Integrated drain body (linear or center).
• With a 6” sleeve on foundation, the 2” No hub
connection through slab allows for 2” variance in
any direction.
• Shower floor sets shower framing for exact wall to
wall installation.
• Instead of building a shower, install a receptacle
similar to a tub.
APPROVAL
Polished Stainless Satin BronzeMatte BlackMatte WhiteOil Rubbed BronzeSatin StainlessDimension
Other:
CA B Finish:
B
2
Stainless Steel Shower Pan
Infinity Drain145 Dixon AvenueAmityville, NY 11701P: 516.767.6786F: 516.740.3066www.InfinityDrain.com
Proprietary and ConfidentialThis design and drawing are the property of Infinity Drain LTD. and must be surrendered upon request. Its contents are submitted for reference only, and may not be reproduced
or used in any other manner unless specifically authorized by an official representative of Infinity Drain LTD.
Drawn by: BR 2/12/18
Material Type
Material Thickness
APPROVAL
Polished Stainless Satin BronzeMatte BlackMatte WhiteOil Rubbed BronzeSatin StainlessDimension
Other:
CA B Finish:
B
2
Stainless Steel Shower Pan
Infinity Drain145 Dixon AvenueAmityville, NY 11701P: 516.767.6786F: 516.740.3066www.InfinityDrain.com
Proprietary and ConfidentialThis design and drawing are the property of Infinity Drain LTD. and must be surrendered upon request. Its contents are submitted for reference only, and may not be reproduced
or used in any other manner unless specifically authorized by an official representative of Infinity Drain LTD.
Drawn by: BR 2/12/18
Material Type
Material Thickness
APPROVAL
Polished Stainless Satin BronzeMatte BlackMatte WhiteOil Rubbed BronzeSatin StainlessDimension
Other:
CA B Finish:
B
2
Stainless Steel Shower Pan
Infinity Drain145 Dixon AvenueAmityville, NY 11701P: 516.767.6786F: 516.740.3066www.InfinityDrain.com
Proprietary and ConfidentialThis design and drawing are the property of Infinity Drain LTD. and must be surrendered upon request. Its contents are submitted for reference only, and may not be reproduced
or used in any other manner unless specifically authorized by an official representative of Infinity Drain LTD.
Drawn by: BR 2/12/18
Material Type
Material Thickness
Infinity Drain® Custom Stainless Steel Shower Bases
With or without curb. Pre-sloped. Ready to Tile.
Integrated drain body.
Infinity Drain® Custom Stainless Steel Shower Bases
Features: • Stainless Steel shower pan is completely waterproof.
• No need for additional floor waterproofing.
• Ready to tile.
• Linear drain or center drain option.
• Curb or curbless option.
• 25 year waterproofing warranty.
• Custom Sizing
Additional Features:• Integrated drain body (linear or center).
• With a 6” sleeve on foundation, the 2” No hub
connection through slab allows for 2” variance in
any direction.
• Shower floor sets shower framing for exact wall to
wall installation.
• Instead of building a shower, install a receptacle
similar to a tub.
APPROVAL
Polished Stainless Satin BronzeMatte BlackMatte WhiteOil Rubbed BronzeSatin StainlessDimension
Other:
CA B Finish:
B
2
Stainless Steel Shower Pan
Infinity Drain145 Dixon AvenueAmityville, NY 11701P: 516.767.6786F: 516.740.3066www.InfinityDrain.com
Proprietary and ConfidentialThis design and drawing are the property of Infinity Drain LTD. and must be surrendered upon request. Its contents are submitted for reference only, and may not be reproduced
or used in any other manner unless specifically authorized by an official representative of Infinity Drain LTD.
Drawn by: BR 2/12/18
Material Type
Material Thickness
APPROVAL
Polished Stainless Satin BronzeMatte BlackMatte WhiteOil Rubbed BronzeSatin StainlessDimension
Other:
CA B Finish:
B
2
Stainless Steel Shower Pan
Infinity Drain145 Dixon AvenueAmityville, NY 11701P: 516.767.6786F: 516.740.3066www.InfinityDrain.com
Proprietary and ConfidentialThis design and drawing are the property of Infinity Drain LTD. and must be surrendered upon request. Its contents are submitted for reference only, and may not be reproduced
or used in any other manner unless specifically authorized by an official representative of Infinity Drain LTD.
Drawn by: BR 2/12/18
Material Type
Material Thickness
APPROVAL
Polished Stainless Satin BronzeMatte BlackMatte WhiteOil Rubbed BronzeSatin StainlessDimension
Other:
CA B Finish:
B
2
Stainless Steel Shower Pan
Infinity Drain145 Dixon AvenueAmityville, NY 11701P: 516.767.6786F: 516.740.3066www.InfinityDrain.com
Proprietary and ConfidentialThis design and drawing are the property of Infinity Drain LTD. and must be surrendered upon request. Its contents are submitted for reference only, and may not be reproduced
or used in any other manner unless specifically authorized by an official representative of Infinity Drain LTD.
Drawn by: BR 2/12/18
Material Type
Material Thickness
APPROVAL
Polished Stainless Satin BronzeMatte BlackMatte WhiteOil Rubbed BronzeSatin StainlessDimension
Other:
CA B Finish:
B
2
Stainless Steel Shower Pan
Infinity Drain145 Dixon AvenueAmityville, NY 11701P: 516.767.6786F: 516.740.3066www.InfinityDrain.com
Proprietary and ConfidentialThis design and drawing are the property of Infinity Drain LTD. and must be surrendered upon request. Its contents are submitted for reference only, and may not be reproduced
or used in any other manner unless specifically authorized by an official representative of Infinity Drain LTD.
Drawn by: BR 2/12/18
Material Type
Material Thickness
APPROVAL
Polished Stainless Satin BronzeMatte BlackMatte WhiteOil Rubbed BronzeSatin StainlessDimension
Other:
CA B Finish:
B
2
Stainless Steel Shower Pan
Infinity Drain145 Dixon AvenueAmityville, NY 11701P: 516.767.6786F: 516.740.3066www.InfinityDrain.com
Proprietary and ConfidentialThis design and drawing are the property of Infinity Drain LTD. and must be surrendered upon request. Its contents are submitted for reference only, and may not be reproduced
or used in any other manner unless specifically authorized by an official representative of Infinity Drain LTD.
Drawn by: BR 2/12/18
Material Type
Material Thickness
APPROVAL
Polished Stainless Satin BronzeMatte BlackMatte WhiteOil Rubbed BronzeSatin StainlessDimension
Other:
CA B Finish:
B
2
Stainless Steel Shower Pan
Infinity Drain145 Dixon AvenueAmityville, NY 11701P: 516.767.6786F: 516.740.3066www.InfinityDrain.com
Proprietary and ConfidentialThis design and drawing are the property of Infinity Drain LTD. and must be surrendered upon request. Its contents are submitted for reference only, and may not be reproduced
or used in any other manner unless specifically authorized by an official representative of Infinity Drain LTD.
Drawn by: BR 2/12/18
Material Type
Material Thickness
A
B B+3
AA
6"
3"
3"
CD
2 14 "
E
SECTION A-AA
B B+3
AA
6"
3"
3"
CD
2 14 "
E
SECTION A-A
A
B B+3
AA
6"
3"
3"
CD
2 14 "
E
SECTION A-A
Center drain option.
A
B B+3
AA
6"
3"
3"
CD
2 14 "
E
SECTION A-A
Pre-sloped.
Features: • Stainless steel shower base is completely waterproof.
• Additional waterproofing on wall is optional.
• Ready to tile.
• Available with any grate style or tile insert.
• Curb or curbless option.
• Lifetime guarantee.
• Custom Sizing.
• Plumbing code compliant for use as prefabricated shower receptor.
• IAPMO tested to IAPMO PS-106-2015 standard.
• Integrated drain body.
• With a 6” sleeve on foundation, the 2” no hub connection through slab allows for 2” variance in any direction.
• Shower base sets shower framing for exact wall to wall installation.
• Factory flood tested as per UPC and IPC standards.
With or without curb. Pre-sloped. Ready to Tile.
Integrated drain body.
Infinity Drain® Custom Stainless Steel Shower Bases
Features: • Stainless Steel shower pan is completely waterproof.
• No need for additional floor waterproofing.
• Ready to tile.
• Linear drain or center drain option.
• Curb or curbless option.
• 25 year waterproofing warranty.
• Custom Sizing
Additional Features:• Integrated drain body (linear or center).
• With a 6” sleeve on foundation, the 2” No hub
connection through slab allows for 2” variance in
any direction.
• Shower floor sets shower framing for exact wall to
wall installation.
• Instead of building a shower, install a receptacle
similar to a tub.
APPROVAL
Polished Stainless Satin BronzeMatte BlackMatte WhiteOil Rubbed BronzeSatin StainlessDimension
Other:
CA B Finish:
B
2
Stainless Steel Shower Pan
Infinity Drain145 Dixon AvenueAmityville, NY 11701P: 516.767.6786F: 516.740.3066www.InfinityDrain.com
Proprietary and ConfidentialThis design and drawing are the property of Infinity Drain LTD. and must be surrendered upon request. Its contents are submitted for reference only, and may not be reproduced
or used in any other manner unless specifically authorized by an official representative of Infinity Drain LTD.
Drawn by: BR 2/12/18
Material Type
Material Thickness
APPROVAL
Polished Stainless Satin BronzeMatte BlackMatte WhiteOil Rubbed BronzeSatin StainlessDimension
Other:
CA B Finish:
B
2
Stainless Steel Shower Pan
Infinity Drain145 Dixon AvenueAmityville, NY 11701P: 516.767.6786F: 516.740.3066www.InfinityDrain.com
Proprietary and ConfidentialThis design and drawing are the property of Infinity Drain LTD. and must be surrendered upon request. Its contents are submitted for reference only, and may not be reproduced
or used in any other manner unless specifically authorized by an official representative of Infinity Drain LTD.
Drawn by: BR 2/12/18
Material Type
Material Thickness
APPROVAL
Polished Stainless Satin BronzeMatte BlackMatte WhiteOil Rubbed BronzeSatin StainlessDimension
Other:
CA B Finish:
B
2
Stainless Steel Shower Pan
Infinity Drain145 Dixon AvenueAmityville, NY 11701P: 516.767.6786F: 516.740.3066www.InfinityDrain.com
Proprietary and ConfidentialThis design and drawing are the property of Infinity Drain LTD. and must be surrendered upon request. Its contents are submitted for reference only, and may not be reproduced
or used in any other manner unless specifically authorized by an official representative of Infinity Drain LTD.
Drawn by: BR 2/12/18
Material Type
Material Thickness
Infinity Drain® Custom Stainless Steel Shower Bases
With or without curb. Ready to Tile.
USG Durock™ Brand Infinity Drain® Shower System
Infinity Drain Custom Stainless Steel Shower Pan
Fabric Waterproofing
Liquid AppliedWaterproofing
Vinyl Liner Pan(PVC, Rubber)
Lead PanCopper Pan
Labor Cost
Length of installation
Material Cost
Ease of Installation
Allows forwall to wallinstallation
Allows for flush against the wall
installation
No mud bed needed or
pre-sloped floor
Ease of coordination
between trades
No customization needed for
project installation(site measuring)
$ $ $ $ $ $ $ $ $ $ $ $ $ $ $ $ $
$ $ $ $ $ $ $ $ $ $ $ $ $
4th Generation3rd Generation2nd Generation1st Generation
High Labor CostFlexible installation, longest install
Compatible with Site Sizable (S)and Fixed Length (FX) Series
Less labor CostFast and flush against the wall installation
Compatible with Fixed Flange (FF) and Side Outlet (FT) Series
Low labor costFaster install
Drain part of shower system
Lowest labor costFastest install
Integrated drain
******
* * *
InstallationWaterproofing
Warranty? ? ? 10 yrs 10 yrs 10 yrs Lifetime
*
* Custom product may be needed.** Site modification or wall specific product may be needed.