Post on 22-Sep-2020
Curtain Wall 50mm
All rights reserved.No part of this publication maybe reproduced, stored in a retrieval system or transmitted in any form or by any
means electronic, mechanical, photocopying, recording or otherwise, without prior permission of Gulf Extrusions.
11-2014-V.03
Curtain Wall 50mm
50 - C INTRODUCTION TO THE SYSTEM
50 - B QUALITY AND CERTIFICATIONS
50 - D PROFILES
50 - E PROFILE LIST
50 - F ACCESSORIES
50 - G ASSEMBLY DRAWINGS
50 - H 3D SECTIONS
50 - A GULF EXTRUSIONS
10
04 - 09
11 - 47
49 - 67
69 - 71
73 - 97
99 - 102
03
3
Gulf Extrusions Co. LLC, the flagship company of the Al Ghurair Group of Companies, was founded in 1978, Dubai, UAE where it has over the years earned the reputation known as one of the most innovative and reliable companies in the Middle East.
Located close to its raw material supplier Dubai Aluminium Company Ltd (DUBAL), the world’s largest single smelter site, Gulf Extrusions has become one of the largest extrusion plants in the region.
Gulf Extrusions quality products can be seen in many of today’s progressive structures. The company was formed with the sole purpose to meet the increasing demands for aluminium extrusions in domestic, regional and international markets.
Gulf Extrusions six presses and highly skilled workforce are able to produce 65,000 metric tonnes per annum with a rated capacity of 24,000 tonnes for powder coated finish, 6,000 tonnes for anodized finish and can offer more than 10,000 profile designs. These extrusions cover numerous industries ranging from architectural to transportation, engineering to structural sections, components for household items, HVAC and customized products.
During the progressive stages of Gulf Extrusions, from its inception to expansion, the company not only has acquired a majority share in the local market, it has also made its presence felt globally throughout the GCC countries, Indian sub -continent, South East Asia, Australia, Africa, Europe and Canada.
Our commitment and utmost priority is to provide customers with the finest quality of aluminium extrusions.
Gulf Extrusions looks ahead to inevitable challenges and product advancements of the new era.
GULFEXTRUSIONS
3
GULF EXTRUSIONS 50-A
44
QUALITY STANDARD & CERTIFICATIONS50-B
Quality is an inseparable element of all activities carried out at Gulf Extrusions. Gulf Extrusions is dedicated to respond and deliver on time, high quality, tailor-made and cost effective products. The management and staff are committed to implement a comprehensive and integrated Quality Management System in accordance with the International Quality Standards of ISO 9001 and ISO 14001.
Anodizing Finish:
• BS EN 12373-1 2001 Clause 7 (BS:6161 Part 6)• BS:3987 Clause 2, 3, 5, 6• Appendix- A, B, C, D, E, F, G, H, J, K, L Minimum Film Thickness- 16 Microns
Powder Coated Finish:
• BS:6496 Clause: 10.4, 10.5, 10.6, 10.7 & 10.8• ISO 2360 / 2813 / 2409 / 2931• Minimum Film Thickness – 60 Microns
Extrusions Dimensions Tolerances:
• BS EN 755 - 9:2008 • BS EN 12020 - 2:2008• DIN 1748, DIN 17615• ASTM B221
INTERNATIONAL STANDARD COMPLIANCE
PRODUCT QUALITY CERTIFICATES
Qualicoat (European Powder Coaters Association):• A quality label for coating on metal for Architectural Applications• A product license under the control of EWAA (European Wrought Aluminium Association) in Zurich Switzerland
Qualanod (European Anodizers Association):• A quality label organization to guarantee high quality Aluminium Anodizing.• A product license under the control of EWAA (European Wrought Aluminum Association) in Zurich Switzerland
• SASO
• ESMA
Management:• ISO 9001 (Quality Management System)
• ISO/TS 16949:2009 (Management System)
Environment:• ISO 14001 (Environment Management System)
Membership in International Organization:• AAC member (Aluminium Anodizers Council - USA)• AEC member (Aluminum Extruders Council - USA)• DIN EN 15088
55
QUALITY STANDARD & CERTIFICATIONS
ALLOY 6005A
Element Minimum Maximum
Si 0.50 0.90
Fe - 0.35
Cu - 0.30
Mn - 0.50
Mg 0.40 0.70
Cr - 0.30
Zn - 0.20
Ti - 0.10
Other Each - 0.05
Other Total - 0.15
Aluminium Remainder
ALLOY 6063
Element Minimum Maximum
Si 0.20 0.60
Fe - 0.35
Cu - 0.10
Mn - 0.10
Mg 0.45 0.90
Cr - 0.10
Zn - 0.10
Ti - 0.10
Other Each - 0.05
Other Total - 0.15
Aluminium Remainder
ALLOY 6061
Element Minimum Maximum
Si 0.40 0.80
Fe - 0.70
Cu 0.15 0.40
Mn - 0.15
Mg 0.8 1.20
Cr 0.04 0.35
Zn - 0.25
Ti - 0.15
Other Each - 0.05
Other Total - 0.15
Aluminium Remainder
ALLOY 6060
Element Minimum Maximum
Si 0.30 0.60
Fe 0.10 0.30
Cu - 0.10
Mn - 0.10
Mg 0.35 0.60
Cr - 0.05
Zn - 0.15
Ti - 0.10
Other Each - 0.05
Other Total - 0.15
Aluminium Remainder
ALLOY 6082
Element Minimum Maximum
Si 0.70 1.30
Fe - 0.50
Cu - 0.10
Mn 0.40 1.00
Mg 0.60 1.20
Cr 0.04 0.15
Zn - 0.20
Ti - 0.10
Other Each - 0.05
Other Total - 0.15
Aluminium Remainder
CHEMICAL COMPOSTIONS
50-B
66
ANODIZING
A wide range of anodizing treatment options are possible for the aluminium profile sections of this system. The color choices from Gulf Extrusions range from Natural, Gold, and Bronze to Spectro colors (Red, Blue, Green, and Gray).
This surface treatment process involves first pre-treatment with scotch brite brushing for the unfinished profiles, and then subsequently fully immersing the aluminium profiles in an acidic electrolyte solution through which electric current is passed creating an anodic film on the profiles ranging from 5-30MICs.
The process is guaranteed and certified for use by QUALANOD - A quality label Organization to guarantee high quality aluminium anodizing and the company’s ISO 9001 certification.
QUALITY STANDARD & CERTIFICATIONS50-B
77
Authorization to use the quality sign
QUALITY STANDARD & CERTIFICATIONS 50-B
88
POWDER COATING
• Horizontal & Vertical Powder coating lines with an Annual Capacity of 24 000 MT Powder Coating BS: 6496 Clause: 10.4, 10.5, 10.6, 10.7, & 10.8 ISO 2360/2813/2409/2931 Minimum Film Thickness - 60 Microns
A wide choice of colors for powder coating can be used for the aluminium profile sections.
From Gulf Extrusions the following powder types are available
• Polyester Façade (PE-F)• Super Durable Façade (SDF) & Hyper Durable Façade (HDF) (Where SDF & HDF are equivalent to Poly-Vinyldine DiFluoride (PVDF) in terms of corrosion performance)• Anti Bacterial (recommended to be used in Hospitals)• Anti Static (recommended for laboratories, electronics assembly buildings) and Heat Resistant in nature.
This surface treatment process involves the following pre-treatment
1. Degreasing2. Washing3. Etching4. Washing5. Chromatising6. Double washing in dematerialized water
Once completed, powder is applied using an electrostatic spraying process with charged powder particles, followed by curing in an oven under a controlled temperature of 180-200C for paint polymerization where the paint layer is at least 60mic.
This whole process is certified for use from QUALICOAT - A quality label for coating on metal for Architectural Applications.
GUARANTEE PERIOD:10 years for PE-F Quality25 years for PE-SDF
QUALITY STANDARD & CERTIFICATIONS50-B
99
Authorization to use the quality sign
QUALITY STANDARD & CERTIFICATIONS 50-B
1010
CW 50 is a unique curtain wall structure that combines multi-structural grid to create various aspects, starting by the conventional curtain wall system passing through the two way horizontal capping curtain wall systems to the four way structural curtain wall systems.
CW 50 has proven to be a curtain wall solution perfectly tailored to the Middle East market requirement.
FEATURES:
The CW 50 system consists of 50mm width structure components allowing several external appearances. It is fast to manufacture and to install. With the wide range of profile selection, the system can provide the possibility of large glass panels, maintaining the stiffness and rigidity of the curtain wall structure. Mullions can be reinforced by Aluminium or Steel tubes to enhance the free span area, making it possible to be used in high structures. In CW 50 system, Casements are Italian openings with selected stay arms to ensure the tightness and stability of the opening.
CW 50 uses the same structures for multifunctional applications:• Conventional application is obtained by applying horizontal and vertical caps, clipped to horizontal and vertical pressure plates screwed to the structure holding the glass panels. Two EPDM gaskets, one to the inside fixed on the structure, the second to the outside fixed on the pressure plate; provide the grip on the glass panels. Glass thickness ranges between 6mm –32 mm
• Two way or horizontal capping application is obtained by applying horizontal caps only, clipped to a horizontal pressure plate screwed to the structure and holding the glass panels. Two EPDM gaskets applied horizontally one to the inside fixed to the structure; the second to the outside fixed to the pressure plate provide the grip on the glass panels. Vertically only a vertical sealant is applied between the glass panels for aesthetic and water tightness Glass thickness ranges between 6mm – 32mm
• Four way structural aspects is a curtain wall aspect which conceals that conceals the aluminium structure from the outside making it completely invisible. Concealed openings are designed in order to keep the external appearance of the structure uniform even in the presence of the opening. The four way structural applications is obtained by fixing a glass toggle to the glass holding the panel by a specially designed aluminium spacer, well sealed by a structural sealant to ensure the rigidity of panel. The space between glass panels is sealed by a neutral sealant for aesthetic and water tightness purposes; this application is the most common application in the MENA region. Glass thickness is of 32 mm if panel is composed of Xmm inside- 20 mm airspace-8 mm outside the glass thickness can vary if we change the outer glass thickness uniformly on the façade.
INTRODUCTION TO THE SYSTEM50-C
INTRODUCTION TO THE SYSTEM
1111
PROFILES
PROFILES 50-D
12
All dimensions in mmVisible area_ _ _ _ _
PROFILES50-D
Mullion / Transom Profiles
13
All dimensions in mm _ _ _ _ _Visible area
PROFILES 50-D
Mullion / Transom Profiles
14
All dimensions in mmVisible area_ _ _ _ _
PROFILES50-D
Complementary Profiles
15
All dimensions in mm _ _ _ _ _Visible area
PROFILES 50-D
Complementary Profiles
16
All dimensions in mmVisible area_ _ _ _ _
PROFILES50-D
Complementary Profiles
17
All dimensions in mm _ _ _ _ _Visible area
PROFILES 50-D
Frame & Sash Profiles
18
All dimensions in mmVisible area_ _ _ _ _
PROFILES50-D
Frame & Sash Profiles
19
All dimensions in mm _ _ _ _ _Visible area
PROFILES 50-D
Frame & Sash Profiles
20
All dimensions in mmVisible area_ _ _ _ _
PROFILES50-D
Mullion / Transom Profiles
21
All dimensions in mm _ _ _ _ _Visible area
PROFILES 50-D
Mullion / Transom Profiles
22
All dimensions in mmVisible area_ _ _ _ _
PROFILES50-D
Mullion / Transom Profiles
23
All dimensions in mm _ _ _ _ _Visible area
PROFILES 50-D
Mullion / Transom Profiles
24
All dimensions in mmVisible area_ _ _ _ _
PROFILES50-D
Mullion / Transom Profiles
25
All dimensions in mm _ _ _ _ _Visible area
PROFILES 50-D
Mullion / Transom Profiles
26
All dimensions in mmVisible area_ _ _ _ _
PROFILES50-D
Complementary Profiles
27
All dimensions in mm _ _ _ _ _Visible area
PROFILES 50-D
Frame & Sash Profiles
28
All dimensions in mmVisible area_ _ _ _ _
PROFILES50-D
Corner Profiles
29
All dimensions in mm _ _ _ _ _Visible area
PROFILES 50-D
Corner Profiles
30
All dimensions in mmVisible area_ _ _ _ _
PROFILES50-D
Mullion / Transom Profiles
31
All dimensions in mm _ _ _ _ _Visible area
PROFILES 50-D
Mullion / Transom Profiles
32
All dimensions in mmVisible area_ _ _ _ _
PROFILES50-D
Mullion / Transom Profiles
33
All dimensions in mm _ _ _ _ _Visible area
PROFILES 50-D
Mullion / Transom Profiles
34
All dimensions in mmVisible area_ _ _ _ _
PROFILES50-D
Mullion / Transom Profiles
35
All dimensions in mm _ _ _ _ _Visible area
PROFILES 50-D
Complementary Profiles
36
All dimensions in mmVisible area_ _ _ _ _
PROFILES50-D
Complementary Profiles
37
All dimensions in mm _ _ _ _ _Visible area
PROFILES 50-D
Complementary Profiles
38
All dimensions in mmVisible area_ _ _ _ _
PROFILES50-D
Complementary Profiles
39
All dimensions in mm _ _ _ _ _Visible area
PROFILES 50-D
Curtain Wall - 50mm
40
All dimensions in mmVisible area_ _ _ _ _
PROFILES50-D
Curtain Wall - 50mm
41
All dimensions in mm _ _ _ _ _Visible area
PROFILES 50-D
Curtain Wall - 50mm
42
All dimensions in mmVisible area_ _ _ _ _
PROFILES50-D
Curtain Wall - 50mm
43
All dimensions in mm _ _ _ _ _Visible area
PROFILES 50-D
Curtain Wall - 50mm
44
All dimensions in mmVisible area_ _ _ _ _
PROFILES50-D
Curtain Wall - 50mm
45
All dimensions in mm _ _ _ _ _Visible area
PROFILES 50-D
Curtain Wall - 50mm
46
All dimensions in mmVisible area_ _ _ _ _
PROFILES50-D
Curtain Wall - 50mm
47
All dimensions in mm _ _ _ _ _Visible area
PROFILES 50-D
Curtain Wall - 50mm
4949
PROFILE LIST
PROFILE LIST
PROFILE LIST 50-E
50
ProfileReference
Profile Section Page WeightKG/M
IXcm4
IYcm4
WXcm3
WYcm3
PROFILE LIST50-E
1.485
1.976
2.387
2.990
1.705
2.091
0.278
24.082
73.03
147.08
231.35
58.295
118.21
0.098
17.332
26.872
34.591
45.895
9.723
12.461
3.204
7.303
15.145
23.636
33.462
12.511
19.645
0.101
6.933
10.749
13.837
18.358
5.797
7.536
1.281
13795
13794
13940
16441
15125
15126
11069
13
13
12
12
13
12
14
51
ProfileReference
Profile Section Page WeightKG/M
IXcm4
IYcm4
WXcm3
WYcm3
PROFILE LIST 50-E
0.297
0.438
0.421
0.364
0.388
1.503
0.365
0.176
0.091
0.989
0.441
0.725
7.341
0.371
3.834
3.604
6.066
4.951
5.164
15.465
0.337
0.149
0.126
0.537
0.294
0.436
2.991
0.349
1.533
1.476
2.426
1.980
1.953
6.951
0.435
11525
11388
11581
11872
11582
11359
11472
14
14
14
14
14
13
16
52
ProfileReference
Profile Section Page WeightKG/M
IXcm4
IYcm4
WXcm3
WYcm3
PROFILE LIST50-E
0.213
0.257
0.386
0.456
0.519
0.331
0.454
0.314
0.181
0.726
0.180
0.284
0.070
0.234
0.197
0.812
1.368
0.811
0.802
0.695
0.775
0.255
0.215
0.735
0.197
0.281
0.102
0.249
0.303
0.459
0.676
0.531
0.500
0.483
0.483
10529
11618
24372
21926
23389
21074
11434
16
16
17
16
16
16
16
53
ProfileReference
Profile Section Page WeightKG/M
IXcm4
IYcm4
WXcm3
WYcm3
PROFILE LIST 50-E
0.541
0.167
1.763
2.005
2.656
0.752
1.226
0.572
0.130
54.465
76.781
122.01
16.516
21.987
2.583
0.187
17.939
22.899
31.553
1.945
8.809
0.649
0.185
11.926
14.347
20.75
4.489
6.218
1.244
0.170
7.175
9.160
12.621
0.809
3.238
11956
21073
13547
14496
15625
10744
13213
16
16
20
20
20
18
18
54
ProfileReference
Profile Section Page WeightKG/M
IXcm4
IYcm4
WXcm3
WYcm3
PROFILE LIST50-E
1.242
1.323
0.560
0.740
3.642
2.470
0.436
24.125
31.25
4.926
5.962
434.51
139.1
0.084
9.744
11.10
1.563
2.059
53.26
31.381
3.463
5.157
6.417
1.895
2.451
47.42
21.688
0.124
3.663
4.391
0.665
0.859
21.303
12.552
1.486
13913
13212
22405
15907
13938
13939
11414
18
18
17
17
21
21
26
55
ProfileReference
Profile Section Page WeightKG/M
IXcm4
IYcm4
WXcm3
WYcm3
PROFILE LIST 50-E
0.433
2.604
2.315
3.322
1.567
3.042
2.646
0.974
75.164
67.253
150.51
35.182
143.10
123.71
6.349
25.136
22.159
32.953
14.509
32.482
28.184
0.560
16.525
14.516
25.634
9.031
25.547
22.111
2.537
10.055
8.863
13.181
6.671
12.993
11.274
11415
12388
13674
12748
12785
13255
13661
26
22
22
23
23
24
24
56
ProfileReference
Profile Section Page WeightKG/M
IXcm4
IYcm4
WXcm3
WYcm3
PROFILE LIST50-E
3.651
2.067
0.389
0.344
0.642
0.239
0.259
295.39
104.79
0.531
0.228
0.225
0.243
0.382
43.146
22.29
5.580
4.575
4.999
0.253
0.289
41.195
18.5
0.366
0.198
0.311
0.209
0.288
17.258
10.25
2.232
1.830
2.127
0.335
0.382
12387
12665
09719
10178
09718
09723
10260
25
25
26
26
26
26
26
57
ProfileReference
Profile Section Page WeightKG/M
IXcm4
IYcm4
WXcm3
WYcm3
PROFILE LIST 50-E
1.615
0.944
1.241
0.311
0.834
1.193
3.120
8.642
30.965
24.499
1.321
2.781
1.061
140.96
15.887
2.530
8.933
0.409
43.287
58.296
59.582
3.603
6.147
5.023
0.575
1.177
0.848
22.211
7.476
0.982
3.643
0.274
7.016
10.378
13.397
09724
11218
13640
11219
11383
11382
13824
26
27
27
27
28
28
28
58
ProfileReference
Profile Section Page WeightKG/M
IXcm4
IYcm4
WXcm3
WYcm3
PROFILE LIST50-E
5.191
2.368
1.911
2.709
2.526
2.662
2.448
256.13
100.506
85.755
221.85
231.97
233.13
135.22
256.13
29.378
26.523
37.915
36.391
34.8
29.222
36.711
18.516
16.171
30.67
29.66
29.528
20.807
36.711
11.351
10.605
15.166
14.556
13.919
11.685
13823
13880
13881
13871
13872
13785
13788
29
30
30
31
31
32
32
59
ProfileReference
Profile Section Page WeightKG/M
IXcm4
IYcm4
WXcm3
WYcm3
PROFILE LIST 50-E
3.006
3.671
2.489
2.462
2.055
2.028
0.423
375.91
313.34
146.94
140.34
109.51
104.45
0.115
41.678
42.754
34.316
33.752
10.947
10.757
3.746
41.466
38.306
21.034
20.376
15.861
15.347
0.149
16.671
17.102
13.727
13.501
6.976
6.851
1.608
13784
13787
14168
14171
14169
14170
11407
33
33
34
34
34
34
35
60
ProfileReference
Profile Section Page WeightKG/M
IXcm4
IYcm4
WXcm3
WYcm3
PROFILE LIST50-E
0.391
0.523
0.315
1.523
2.313
2.777
1.123
0.602
0.138
0.200
12.280
65.674
46.122
8.022
5.557
4.227
3.903
14.268
26.89
59.212
13.765
0.433
0.168
0.182
5.626
11.615
10.188
3.119
2.223
1.691
1.561
6.341
6.172
12.464
3.494
11408
11346
11347
13786
11348
11349
11350
35
35
35
35
36
36
37
61
ProfileReference
Profile Section Page WeightKG/M
IXcm4
IYcm4
WXcm3
WYcm3
PROFILE LIST 50-E
1.004
1.396
0.829
0.696
4.655
4.312
1.768
2.516
17.080
9.421
9.112
97.529
--
--
18.922
67.357
11.219
4.926
295.477
--
--
1.285
6.832
3.768
3.645
17.859
--
--
4.850
10.001
2.973
1.881
35.815
--
--
11354
18470
18472
18471
11274
10296
09458
37
15
15
15
38
38
38
62
ProfileReference
Profile Section Page WeightKG/M
IXcm4
IYcm4
WXcm3
WYcm3
PROFILE LIST50-E
1.133
1.454
1.748
1.964
2.170
3.400
4.148
--
25.67
62.55
105.81
142.04
351.78
696.39
--
17.04
22.96
27.57
30.49
52.86
68.18
--
6.76
12.35
17.50
20.96
41.34
64.5
--
6.79
9.15
10.99
12.16
21.12
27.26
10682
18164
18163
18162
18327
18003
18004
38
44
45
44
43
40
42
63
ProfileReference
Profile Section Page WeightKG/M
IXcm4
IYcm4
WXcm3
WYcm3
PROFILE LIST 50-E
1.453
1.692
1.798
2.067
2.500
2.284
2.452
48.01
84.14
26.13
65.92
74.09
114.37
151.29
7.80
9.44
19.14
24.91
30.72
29.52
32.20
9.86
14.25
7.0
13.69
14.76
20.04
24.02
4.76
5.82
7.66
9.96
12.29
11.81
12.88
18166
18165
18170
18169
18007
18168
18326
45
44
45
45
45
44
43
64
ProfileReference
Profile Section Page WeightKG/M
IXcm4
IYcm4
WXcm3
WYcm3
PROFILE LIST50-E
3.010
3.753
4.482
6.843
1.590
1.806
2.068
348.46
369.54
726.72
1800.24
49.08
85.41
22.55
42.26
53.94
68.87
111.68
8.12
9.7
19.37
41.10
44.52
69.41
131.82
10.12
14.76
8.67
16.90
21.58
27.55
44.67
5.08
6.11
9.22
18167
18005
18006
18231
18172
18171
18010
39
40
42
44
45
44
45
65
ProfileReference
Profile Section Page WeightKG/M
IXcm4
IYcm4
WXcm3
WYcm3
PROFILE LIST 50-E
4.048
5.126
1.206
1.466
1.044
0.768
0.456
222.99
518.26
12.41
14.41
16.87
10.5
1.76
43.09
57.27
14.90
16.09
4.51
1.58
1.17
36.56
62.24
4.23
4.76
4.66
3.25
0.75
20.52
27.27
6.70
7.41
1.61
0.75
0.93
18008
18009
24583
24472
18173
18174
18175
40
40
41
40
47
47
47
66
ProfileReference
Profile Section Page WeightKG/M
IXcm4
IYcm4
WXcm3
WYcm3
PROFILE LIST50-E PROFILE LIST50-E
0.183
0.279
0.478
0.306
0.185
1.819
2.285
--
--
--
--
--
106.292
233.040
--
--
--
--
--
10.345
13.610
--
--
--
--
--
16.566
27.595
--
--
--
--
--
6.415
8.605
24582
24584
18177
18176
11053
19222
19221
47
47
47
47
17
43
39
67
2.398
2.632
1.087
1.111
241.547
297.052
6.748
5.567
13.898
40.423
25.253
19.415
29.315
34.072
2.104
2.532
8.873
16.131
2.502
2.171
19223
19220
81203
81202
39
39
19
19
ProfileReference
Profile Section Page WeightKG/M
IXcm4
IYcm4
WXcm3
WYcm3
PROFILE LIST 50-E
6969
ACCESSORIES
50-FACCESSORIES
70
Gasket / Accessories Reference
Section Description Unit
ACCESSORIES50-F
Linear Meter
Linear Meter
Linear Meter
Linear Meter
Linear Meter
Linear Meter
Linear Meter
Linear Meter
GE-G-034
GE-G-021
GE-G-048
GE-G-047
GE-G-055
GE-G-033
GE-G-039
GE-G-015
EPDM RUBBERUSED WITH SASH
13212
EPDM RUBBERUSED WITH FRAME
EPDM RUBBERUSED WITH FRAME
EPDM RUBBER USEDWITH
MULLION / TRANSOM
EPDM RUBBERUSED WITH
PRESSURE 801203
EPDM RUBBER USEDWITH
MULLION / TRANSOM
EPDM RUBBERUSED WITH FRAME
& SASH
EPDM RUBBER USED WITH
MULLION / TRANSOM
7171
Gasket / Accessories Reference
Section Description Unit
Linear Meter
Linear Meter
Piece
Piece
GE-G-056
GE-G-060
GE-LOCKING SYSTEM
GE-STAY ARM
EPDM RUBBER FOROPENING USED WITHMULLION / TRANSOM
LOCKING SYSTEM
FRICTION STAY ARM
EPDM RUBBER FORTRANSOM COVER CLIP
ACCESSORIES 50-F
7373
ASSEMBLY DRAWINGS
ASSEMBLY DRAWINGS 50-G
74
All dimensions in mmVisible area_ _ _ _ _
ASSEMBLY DRAWINGS50-G
All dimensions in cross sections are shown in mmProfile are not necessarily shown to scale
50mm 4-way Structural Glazing
75
All dimensions in mm _ _ _ _ _Visible area
ASSEMBLY DRAWINGS 50-G
Detail - 150mm 4-way Structural Glazing
76
All dimensions in mmVisible area_ _ _ _ _
ASSEMBLY DRAWINGS50-G
Detail - 250mm 4-way Structural Glazing
77
All dimensions in mm _ _ _ _ _Visible area
ASSEMBLY DRAWINGS 50-G
Detail - 350mm 4-way Structural Glazing
78
All dimensions in mmVisible area_ _ _ _ _
ASSEMBLY DRAWINGS50-G
Detail - 450mm 4-way Structural Glazing
79
All dimensions in mm _ _ _ _ _Visible area
ASSEMBLY DRAWINGS 50-G
Detail - 550mm 4-way Structural Glazing
80
All dimensions in mmVisible area_ _ _ _ _
ASSEMBLY DRAWINGS50-G
Detail - 650mm 4-way Structural Glazing
81
All dimensions in mm _ _ _ _ _Visible area
ASSEMBLY DRAWINGS 50-G
50mm 4-way Structural Glazing
82
All dimensions in mmVisible area_ _ _ _ _
ASSEMBLY DRAWINGS50-G
50mm 2-way Structural Glazing
All dimensions in cross sections are shown in mmProfile are not necessarily shown to scale
83
All dimensions in mm _ _ _ _ _Visible area
ASSEMBLY DRAWINGS 50-G
Detail - 150mm 2-way Structural Glazing
84
All dimensions in mmVisible area_ _ _ _ _
ASSEMBLY DRAWINGS50-G
Detail - 250mm 2-way Structural Glazing
85
All dimensions in mm _ _ _ _ _Visible area
ASSEMBLY DRAWINGS 50-G
Detail - 350mm 2-way Structural Glazing
86
All dimensions in mmVisible area_ _ _ _ _
ASSEMBLY DRAWINGS50-G
Detail - 450mm 2-way Structural Glazing
87
All dimensions in mm _ _ _ _ _Visible area
ASSEMBLY DRAWINGS 50-G
Detail - 550mm 2-way Structural Glazing
88
All dimensions in mmVisible area_ _ _ _ _
ASSEMBLY DRAWINGS50-G
Detail - 650mm 2-way Structural Glazing
89
All dimensions in mm _ _ _ _ _Visible area
ASSEMBLY DRAWINGS 50-G
50mm 2-way Structural Glazing
90
All dimensions in mmVisible area_ _ _ _ _
ASSEMBLY DRAWINGS50-G
50mm Conventional
All dimensions in cross sections are shown in mmProfile are not necessarily shown to scale
91
All dimensions in mm _ _ _ _ _Visible area
ASSEMBLY DRAWINGS 50-G
Detail - 1
91
50mm Conventional
92
All dimensions in mmVisible area_ _ _ _ _
ASSEMBLY DRAWINGS50-G
Detail - 250mm Conventional
93
All dimensions in mm _ _ _ _ _Visible area
ASSEMBLY DRAWINGS 50-G
Detail - 350mm Conventional
94
All dimensions in mmVisible area_ _ _ _ _
ASSEMBLY DRAWINGS50-G
Detail - 450mm Conventional
95
All dimensions in mm _ _ _ _ _Visible area
ASSEMBLY DRAWINGS 50-G
Detail - 550mm Conventional
96
All dimensions in mmVisible area_ _ _ _ _
ASSEMBLY DRAWINGS50-G
Detail - 650mm Conventional
97
All dimensions in mm _ _ _ _ _Visible area
ASSEMBLY DRAWINGS 50-G
50mm Conventional
9999
3D SECTIONS 50-H
3D SECTIONS
100
3D SECTIONS50-H
50mm Mullion / Transom
101
3D SECTIONS 50-H
50mm Curtain Wall
102
3D SECTIONS50-H
50mm Curtain Wall
All rights reserved.No part of this publication maybe reproduced, stored in a retrieval system or transmitted in any form or by any
means electronic, mechanical, photocopying, recording or otherwise, without prior permission of Gulf Extrusions.
P.O.Box-5598, Dubai, United Arab Emirates • Tel: +971 4 884 6146 • Fax: +971 4 884 6830 Email: mail@gulfex.com • Visit us at www.gulfex.com